![Page 1: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/1.jpg)
AAETIAnil Agarwal Environment Training Institute
Understanding Zig Zag Kilns
![Page 2: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/2.jpg)
Schematic illustration of operations and
firing zones of an FCBTKAAETI
![Page 3: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/3.jpg)
Problems With FCBTK TechnologyAAETI
![Page 4: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/4.jpg)
Problems With FCBTK TechnologyAAETI
• Air travels in a straight line and remains in thekiln for a shorter duration as the combustionzone is smaller. Therefore, the air does not getsufficient amount of time to properly mix withthe fuel, resulting in incomplete combustion.the fuel, resulting in incomplete combustion.
• Improper distribution of heat in different partsof the combustion zone is another majordownside of an FCBTK. Green bricks stacked forfiring are not exposed to a uniform temperatureand only 60 per cent of the bricks fired turn outto be Class I (good quality).
![Page 5: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/5.jpg)
Non-Uniform Temperature Distribution
in the KilnAAETI
Heat loss from top surface of the kiln to surrounding
Heat loss from side
walls to surrounding1000 - 1050 0C
900 0C
Class – I: 50-60% Class – II: 30-35% Breakages: 10-15%
Low percentage of Class-I bricks –
Annual loss of Rs 10-15 lakh/year
![Page 6: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/6.jpg)
Zig Zag KilnsAAETI
• What are the things to be taken into account
• Size and dimensions of each kiln component?
• Per day number of bricks to be produced?• Per day number of bricks to be produced?
• Time Requirement?
• Equipments required?
• Techno-economics?
![Page 7: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/7.jpg)
Main Components of the KilnAAETI
![Page 8: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/8.jpg)
Main Components of the KilnAAETI
• Dug width
• Dug well height
• Chamber length
• Kiln outer dimensions
• Flue duct system
• Kiln wall
• Side nali spacing
• Gali width
• Miyan dimensions
• Kiln wall
• Wicket gate or dwari
• Kiln floor
• Chimney
![Page 9: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/9.jpg)
Dimensions of a typical natural draft
zigzag kilnAAETI
![Page 10: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/10.jpg)
Dimensions of a typical induced draft
zigzag kilnAAETI
• A minimum height of 27m (approximately 90feet) has been mandated by MoEF&CC for brickkilns in its new draft standards
• And for all other dimensions kept constant inthe above table, generally 10000 more bricksthe above table, generally 10000 more bricksper day can be produced in an induced draft Zig-Zag Kilns
• In an induced draft kiln, the draft is created withthe help of a fan. The capacity of the fandepends on the trench width and the number ofbricks to be produced per day (Generally 12 –15 HP fan is used)
![Page 11: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/11.jpg)
Dimension of main componentsAAETI
DUG WALL HEIGHT
• The dug wall or miyan wall height is theheight measured from the dug surface. It isgenerally 10–11 feet
CHAMBER LENGTHCHAMBER LENGTH
• In general, the length of the chamber variesfrom six to nine feet. Better zigzagging of theair flow can be achieved by decreasing thelength of the chamber. Therefore, six feetlong chambers are recommended for bothinduced and natural draft zigzag kilns.
![Page 12: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/12.jpg)
FLUE DUCT SYSTEMAAETI
The flue duct system consists of designing the size and dimensions of following components:
• Main nali (main flue gas inlet)• Main nali (main flue gas inlet)
• Side nali (side flue gas inlet)
• Vertical hall or mangal
![Page 13: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/13.jpg)
Schematic of a main naliAAETI
![Page 14: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/14.jpg)
Side NaliAAETI
The cross-section of a side nali is about 70
per cent of the mail nali
![Page 15: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/15.jpg)
Side Nali SpacingAAETI
Side nalis are flue inlets placed at regular
intervals along the length of the miyan. The
spacing is defined by the length of the
chamber
![Page 16: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/16.jpg)
Vertical Hall or MangalAAETI
• Vertical hall is a rectangular structure that
serves as connector between the main
and side nalis and the shunt.
![Page 17: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/17.jpg)
Vertical Hall or MangalAAETI
![Page 18: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/18.jpg)
Gali WidthAAETI
• The gali is a narrow section on either edge of
a zigzag kiln, always narrower in width than
the dug width. It is generally half of the dug
width and not more than 15 – 16 feet at max
![Page 19: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/19.jpg)
MIYAN DIMENSIONAAETI
• The length of the miyan is decided according to thenumber of chambers to be set on one side of thetrench length
• In case the chimney is located at the center of themiyan, the width of the miyan should be able toaccommodate the base of the chimney. In suchaccommodate the base of the chimney. In suchcases, the width of the miyan usually variesbetween 18 to 30 feet.
• If, on the other hand, the chimney is located on oneside of the kiln, the width of the miyan can be less(sufficient enough to accommodate the flue ductsystem)—about 16–18 feet.
![Page 20: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/20.jpg)
MIYAN DIMENSIONAAETI
Dimension of a miyan;
• Miyan length = 156 feet (26 chambers) or 192ft (32
chambers) + 1 brick size
• Miyan width = 25–28 feet for natural and 18 ft for induced draft zigzag kilns
• Miyan height = 10–11 feet• Miyan height = 10–11 feet
• For a smaller kiln of 26 chambers, i.e.,the miyan length should be 156ft (26 ft x6ft chamber = 156ft). If a kiln has 32chambers, miyan length should be 192ft(32 ft x 6ft chamber = 192ft)
![Page 21: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/21.jpg)
Schematic of miyan wallAAETI
![Page 22: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/22.jpg)
Miyan wallAAETI
![Page 23: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/23.jpg)
KILN’S OUTER DIMENSIONSAAETI
• A kiln’s outer dimensions can be calculatedsimply by adding dug width and gali widthto the miyan wall’s dimensions
• Length of kiln (excluding outer wall thickness) = Length of miyan + 2 x gali widththickness) = Length of miyan + 2 x gali width
for example = 156 + 2 x 15 = 186 ft (for zigzag kilns with 26 chambers and 15 ft gali)
• Breadth of kiln (excluding outer wall thickness) = Width of miyan + 2 x dug width
for example = 25 + 2 x 33 = 91 ft (for zigzag kilns with 33 ft dug width)
![Page 24: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/24.jpg)
KILN’S OUTER DIMENSIONSAAETI
![Page 25: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/25.jpg)
KILN WALLSAAETI
The outer wall and the miyan wall are the two key
kiln walls. Since there is a lot of workers’
movement around the walls, they need to be
strong and durable.
Miyan wall has already been discussed earlierMiyan wall has already been discussed earlier
Outer Wall Design
Generally, the outer wall is a double brick wall
plastered with mud. The space between the walls
is filled with mud and ash, for insulation. A three
inch inclination is maintained from the bottom to
the top of the outer on the outside of the kiln.
![Page 26: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/26.jpg)
Cross-section of the outer wallAAETI
![Page 27: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/27.jpg)
Outer wall of the kilnAAETI
![Page 28: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/28.jpg)
WICKET GATE or DWARIAAETI
Wicket gates are provided in the outer wall of the
kiln for transportation of bricks in and out of the
kiln. There is no consistent design methodology to
define size, positioning and number of wicket gates.
The following considerations must be taken intoThe following considerations must be taken into
account while designing a wicker gate:
• Heat loss must be minimized;
• It should be easy to transport green bricks into and
fired bricks out of the kiln;
• It should be easy and to transport green bricks into
the dug efficiently using any mode of transport,
either human, animal, electric cars or trucks.
![Page 29: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/29.jpg)
WICKET GATE or DWARIAAETI
![Page 30: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/30.jpg)
WICKET GATE or DWARIAAETI
Space left for filling ash for better
insulation
Two 18 inch walls are constructed and
before and one after this space
![Page 31: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/31.jpg)
Kiln floor designAAETI
![Page 32: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/32.jpg)
Chimney AAETI
• The chimney is the most important and costly
section of a kiln structure. Hence, chimney design is
of prime concern for all kiln owners
• In retrofitting of existing kiln into High Draft zig zag
kiln same chimney can be used but for stackkiln same chimney can be used but for stack
monitoring, a port hole and a proper platform for
placing the monitoring instrument should be
provided
• In Natural draft zig zag kiln the chimney is
responsible for creating the draft and therefore the
height of the chimney is decided depending upon
the production capacity
![Page 33: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/33.jpg)
A typical Schematic diagram of a chimney
baseAAETI
![Page 34: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/34.jpg)
Apparatus Required AAETI
![Page 35: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/35.jpg)
Timeline For RetrofittingAAETI
• The complete process of retrofitting ANINDUCED DRAFT KILN WHERE SAMECHIMNEY IS USED takes around 50-60days, after which the kiln is ready forstacking and firing the next batch;stacking and firing the next batch;
• Conversion to a NATURAL DRAFT KILNtakes approximately 30 days extra, sincethe chimney needs to be dismantled andreconstructed; here the entire process ofconversion takes around 80-90 days
![Page 36: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/36.jpg)
Techno-economics of retrofitting a FCBTK
into zigzag brick kilnsAAETI
![Page 37: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/37.jpg)
BENEFITSAAETI
![Page 38: Understanding Zig Zag-Sonal Kumar and Rahul Kumarcdn.cseindia.org/...brick...Zig-Zag-Sonal-Kumar-and-Rahul-Kumar.pdf · Non-Uniform Temperature Distribution AAETI in the Kiln Heat](https://reader031.vdocuments.mx/reader031/viewer/2022030413/5a9e6b3a7f8b9a67178b54a3/html5/thumbnails/38.jpg)
AAETI
Thank you
Rahul KumarCentre for Science and Environment
41, Tughlakabad Institutional Area
New Delhi – 110062
Tel: 011-40616000
Fax: 011-29955879
Website: www.cseindia.org