www.hennecke.com
360˚ TRAININGS
>> Practice-oriented courses and seminars for the professional handling of Hennecke’s machine and plant technology
Training and seminar programme
2016
Professional and practice-oriented
03
The theoretical content of the training is transmitted in the new, in-house training center and the practical transfer takes place withthe help of original machines. The portfolio's modularity guaranteesthat the training sessions are tailor-made. Special seminars round offthe standard programme.
Explanations about the Modules
On the following pages, you will find more detailed information about the different modules and their contents. Please pay attentionto the different recommendations for taking part in the different training modules.
>> Before taking part in some seminars from Module Group II, we suggest that newcomers participate in the basic seminar on polyurethane technology [G-PU].
>> The seminars from Module Group III are predominantly directed at maintenance servicers, fitters, machine operators and foremen. The seminars on application technology as well as those for production and maintenance managers are also recommended.
>> The Module Group IV practical seminars give maintenance electricians and project engineers all the necessary information about hardware, software applications and system interfaces.
>> In Module Group II + III + V, we offer you on request a series of customized seminars. These take place in our training center or at your premises straight on the machine or plant.
>> All seminars are also offered in English at no extra cost. Please contact our 360° Service Hotline for exact appointments. We can also offer you other foreign languages on request.
If you have any questions, we can be contacted in person at all times.
Training Modules I - V
04
Seminars for Technical Service and Maintenance
Module IIISeminars for Metering Machine
Operators and Mixhead technology
Module II
Three days, theory and practice
STREAMLINE [M-STL]
Three days, theory and practice
ELASTOLINE V/F [M-EL]
Three days, theory and practice
TOPLINE HK[M-TL]
Three days, theory and practice
HIGHLINE[M-HL]
One day, theory
INTEGRATION ROBOT[G-IR]
NEW
Basic Seminar on Polyurethane Technology
Module I
One day, theory and practice
Basics on polyurethanetechnology[G-PU]
Drei Tage, Theorie und Praxis
HIGHLINE[G-HL]
inkl. Mischkopfbaureihe MT/MXL
Three days, theory and practice
HIGHLINE[G-HL]
incl. MT /MXL mixhead type
Three days, theory and practice
TOPLINE HK[G-TL]
incl. MX /MT mixhead type
Three days, theory and practice
PUR-CSM (MICROLINE or TOPLINE)[G-CSM]incl. MN mixhead type
Three days, theory and practice
STREAMLINE [G-STL]
incl. MT /RTM mixhead type
Three days, theory and practice
ELASTOLINE V/F [G-EL]
incl. MEL mixhead type
05
Practical Seminars on Automation Technology
Module IV Module V
Hardware configuration
Software configuration
System interfaces
Plant technology
Customized Seminars
Special machines
MICROLINE
TOPLINE HT
HK-R 5000
CARBOMAT
AEROMAT GU /ST
PENTAMAT 30i / 50i
Sandwich panel lines
Refrigerator lines
Slabstock lines
Moulded foam lines
TOPLINE HK-MF (multi-component)
[P-A]
One day, theory andpractice
PURTRONIC [P-PTC]One day, theory and practice
The dates for Module I and II can be found in our trainings calendar.The dates for Module III to V are available on request.
The training can also be requested on the machine or plant at your site.
2016All seminar dates at a glance
G-CSM
G-CSM
G-CSM
G-IR
G-STL
G-STL
G-STL
G-TL
G-TL
G-TL
G-PU
G-HL
G-HL
G-HL
G-PU
G-EL
G-EL
G-EL
G-STL
G-STL
G-STL
G-TL
G-TL
G-TL
G-PU
G
G-HL
G-HL
G-HL
G-PU
G-CSM
G-CSM
G-CSM
G-IR
G-EL
G-EL
G-EL
G-EL
G-EL
G-EL
G-STL
G-STL
G-STL
G-TL
G-TL
G-TL
G-PU
G-HL
G-HL
G-HL
G-PU
G-CSM
G-CSM
G-CSM
G-EL
G-EL
G-EL
G-STL
G-STL
G-STL
G-TL
G-TL
G-TL
G-PU
G-HL
G-HL
G-HL
G-PU G-IR
7
14
21
28
2
4
11
18
25
12
9
13
16
2324
30
6
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
2
53 5
1
3
6
10
17
24
31
2
45
789
111213141516
181920212223
252627282930
7
14
21
2829
123456
8 9 101112 13
1516171819 20
22232425 2627
1 2 3 4
5 6 8 910111213
151617181920
222324252627
293031
1 3 5 6 7 8 910
121314151617
19
2021222324
2627282930
3 4 5 6 7 8 101112
1415
171819202122
2526272829
31
13
20
27
12345 789
101112
141516171819
212223242526
282930
4
6
2
2
3
4
1
January February March April May June July August September October November December
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Mon
Tue
Wed
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Thu
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Sun
Mon
Tue
06
G-HL
G-PU
G-HL
G-HL
G-TL
G-TL
G-TL
G-PU
G-CSM
G-CSM
G-CSM
G-IR
G-EL
G-EL
G-EL
G-STL
G-STL
G-STL
G-HL
G-HL
G-HL
G-PU
G-CSM
G-CSM
G-CSM
G-IR
G-EL
G-EL
G-EL
G-STL
G-STL
G-STL
G-HL
G-HL
G-HL
G-PU
G-TL
G-TL
G-TL
G-PU
36
37
38
39
1
27
28
29
30
32
31
33
34
41
40
42
43
44
46
45
47
48
49
50
51
52
5
1 2 3 4
5 6 8 91
3 6 7 8 91
2
3 4 5 6 7 8
4
11
18
25
123
56789
10
121314151617
192021222324
262728293031
1
8
15
22
29
234567
91011121314
161718192021
232425 262728
3031
5
12
19
26
1234
6789
1011
131415161718
202122232425
27282930
3
10
17
24
31
12
456789
111213141516
181920212223
252627282930
1
7
14
17
21
28
23456
89
10111213
1516
181920
222324252627
2930
5
12
19
2526
123
4
6789
1011
1314151617 18
2021222324
2728293031
2
July August September October November December
M Mon
Tue
Wed
Thu
Fri
Sat
Sun
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
07
Please contact us anytime if you wish to make an individual appointment.
Basic Seminar on Polyurethane Technology
08
Basics on polyurethane technology [G-PU]
Learning objectives:
The participants acquire the basics in polyurethane chemistry. They learn how components are composed and how they behave duringchemical reactions. Furthermore, the seminar also teaches participants how to deal with chemicals safely and how raw materials shouldbe stored properly.
I
Target group
Newcomers, machine fitters, machine operators, production managers, quality management staff
Number of participants
Three to eight people
Duration of seminar
One day, 9:00 – 16:00 hrs
Seminar fee
290.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
Seminar contents:
Basic principles of polyurethane raw materials
Products made of polyurethane
Polyols (composition of raw material)
Isocyanates (composition of raw material)
The reaction mix
Determination of characteristic parameters during the reaction process
Determination of characteristic values of the finished product
Hazards and how to avoid them when processing polyurethane materials
"Hands-on" practical exercises
Seminars for Metering Machine Operators
09
II HIGHLINE [G-HL]We recommend that newcomers take part in the basic seminar on polyurethane technology [G-PU]
Learning objectives:
After the seminar, participants will know how to operate and set HIGHLINE high-pressure metering machines. They will be able to namethe components used and be familiar with their function and operation. It will be possible for them to carry out production adjustmentsand modifications to system parameters independently and effectively. Moreover, they will be able to adjust the pumps, mixhead and injectors and explain their function. The participants will also be in a position to localize any faults and correct them (fault simulation).Participants will also be taught to troubleshoot mixhead problems.
Target group
Newcomers, machine fitters, machine operators, foremen, application engineers, quality management staff, production and maintenance managers
Number of participants
Three to eight people
Duration of seminar
Three days, each 9:00 – 16:00 hrs
Seminar fee
1.350.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
Seminar contents:
Configuration of the HIGHLINE metering machine according to the diagrams (wet end and hydraulic system)
Safety equipment and its functions
Design and operation of metering pumps
Machine operation using the operator panel (OP)
Overview of different menus at the OP and explanation of adjustable parameters
Recording and function of a pump characteristic
Machine operation (practical exercises)
Adjusting foam pressure, selecting and replacing injectors
Localization and correction of troubles and faults
Working with the documentation and spare parts lists
Electrical, hydraulic and pneumatic control of the mixhead
Troubleshooting
Maintenance and practical exercises on the mixhead (replacement of seals)
Functioning principle and design of mixhead
II TOPLINE HK [G-TL]We recommend that newcomers take partin the basic seminar on polyurethane technology [G-PU]
1010
Learning objectives:
After the seminar, participants will know how to operate and set TOPLINE HK high-pressure metering machines. They will be able toname the components used and be familiar with their function and operation. It will be possible for them to carry out production adjustments and modifications to system parameters independently and effectively. Moreover, they will be able to adjust the pumps,mixhead and injectors and explain their function. The participants will also be in a position to localize any faults and correct them (fault simulation). Participants will also be taught to troubleshoot mixhead problems.
Target group
Newcomers, machine fitters, machine operators, foremen, application engineers, quality management staff, production and maintenance managers
Number of participants
Three to eight people
Duration of seminar
Three days, each 9:00 – 16:00 hrs
Seminar fee
1.350.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
Seminar contents:
Configuration of the TOPLINE HK metering machine according to the diagrams (wet end and hydraulic system)
Safety equipment and its functions
Design and operation of metering pumps
Machine operation using the operator panel (OP)
Overview of different menus at the OP and explanation of adjustable parameters
Recording and function of a pump characteristic
Machine operation (practical exercises)
Adjusting foam pressure, selecting and replacing injectors
Localization and correction of troubles and faults
Working with the documentation and spare parts lists
Electrical, hydraulic and pneumatic control of the mixhead
Troubleshooting
Maintenance and practical exercises on the mixhead (replacement of seals)
Functioning principle and design of mixhead
1111
II PUR-CSM [G-CSM]This seminar assumes knowledge of how to operate industrial robots. In addition to that, we recommend that newcomers take part in the seminars [G-PU] and [G-TL]
Learning objectives:
After the seminar, participants will know the basics of how to operate and set TOPLINE HK or MICROLINE high-pressure metering machines with regard to PUR-CSM polyurethane spray technology. They will be able to name the components used and be familiar withtheir function and operation. In addition, the function and design of the glass fibre feed system is explained so that operators can carryout maintenance work at the chopping unit. It will be possible for the participants to carry out production adjustments and modificationsto system parameters independently and effectively. Moreover, they will be able to adjust the pumps, mixhead and spray nozzles and explain their function. The participants will also be in a position to localize any faults and correct them (fault simulation). Participants willalso be taught to troubleshoot mixhead problems.
Seminar contents:
Configuration of the TOPLINE HK and MICROLINE (brush-up)
Safety equipment and its function
Metering pumps, design and operation
CSM mixhead portfolio(MN6, MN8, MN10, MN10-4), function, setting of the foaming pressure, selection and change of injectors, air pressure and volume during the spraying process
Chopping unit and roving station, function and setting
Machine operation at the Operator Panel (OP), overview of the individualmenus on the OP and explanation of the different parameters
Dry end, function and interface to the wet end and robot
Troubleshooting, maintenance and servicing
Determination of optimal process parameters and the effect of individual parameter changes (practical exercises in the CSM-CENTER)
Target group
Newcomers, machine fitters, machine operators, foremen, application engineers, quality management staff, production and maintenance managers
Number of participants
Three to eight people
Duration of seminar
Three days, each 9:00 – 16:00 hrs
Seminar fee
1.350.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
Electrical, hydraulic and pneumatic control of the mixhead
Troubleshooting
Maintenance and practical exercises on the mixhead (replacement of seals)
Functioning principle and design of mixhead
II
12
Learning objectives:
After the seminar, participants will know how to operate and set STREAMLINE high-pressure metering machines. They will be able to namethe components used and be familiar with their function and operation. It will be possible for them to carry out production adjustmentsand modifications to system parameters independently and effectively. Moreover the participants will also be in a position to localize anyfaults and correct them (fault simulation). Participants will also be taught to troubleshoot mixhead problems.
Target group
Newcomers, machine fitters, machine operators, foremen, application engineers, quality management staff, production and maintenance managers
Number of participants
Three to eight people
Duration of seminar
Three days, each 9:00 – 16:00 hrs
Seminar fee
1.350.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
Seminar contents:
Configuration of the STREAMLINE metering machine according to the diagrams (wet end and hydraulic system)
Safety equipment and its functions
Design and operation of metering pumps
Machine operation using the operator panel (OP)
Overview of different menus at the OP and explanation of adjustable parameters
Recording and function of a pump characteristic
Machine operation (practical exercises)
Adjusting foam pressure, selecting and replacing injectors
Localization and correction of troubles and faults
Working with the documentation and spare parts lists
STREAMLINE [G-STL]The seminar provides basic knowledge of the STREAMLINE high-pressure metering machine
Electrical, hydraulic and pneumatic control of the mixhead
Troubleshooting
Maintenance and practical exercises on the mixhead (replacement of seals)
Functioning principle and design of mixhead
13
II ELASTOLINE V/F [G-EL]The seminar will provide participants with important basics on processing PU elastomers with the ELASTOLINE low-pressure metering machine
Learning objectives:
After the seminar, participants will know how to operate and adjust ELASTOLINE low-pressure reaction casting machines. They will be familiar with the function and operation of all assemblies and individual parts installed in the machine. It will be possible for them to carryout production adjustments and modifications to system parameters independently and in a process-oriented manner. The participants will also be in a position to localize any faults and correct them (fault simulation). Participants will also be taught to troubleshoot mixhead problems.
Seminar contents:
Configuration of the reaction casting machine according to the diagrams and layouts
Safety equipment and its functions
Design and operation of metering pumps
Design and operation of mixhead and metering technology
Function and principle of the heating systems
Machine operation and menu navigation on the MP
Overview and benefit of the individual plant parameters
Recording and function of a pump characteristic
Practical operation and handling of the plant
Setting of all relevant process pressures
Localization and correction of troubles and faults
Working with the documentation and spare parts lists
Target group
Newcomers, machine fitters, machine operators, foremen, application engineers, quality management staff, production and maintenance managers
Number of participants
Three to eight people
Duration of seminar
Three days, each 9:00 – 16:00 hrs
Seminar fee
1.350.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
Electrical, hydraulic and pneumatic control of the mixhead
Troubleshooting
Maintenance and practical exercises on the mixhead (replacement of seals)
Functioning principle and design of mixhead
14
II ROBOT INTEGRATION [G-IR]We recommend that participants take part in the PUR-CSM seminar
Learning objectives:
The participants will be taught how the standardized interface between coupling control and the robot controller (ABB or FANUC product)functions. This comprises the hardware interface with safety signals and the software interface with the program number transfer andthe corresponding reference signals.
Target group
Project engineers (knowledge ofPLC [SIMATIC S7] programmingand of the respective robot product is necessary)
Number of participants
Three to eight people
Duration of seminar
One day, 9:00 – 16:00 hrs
Seminar fee
450.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
Seminar contents:
Structure of PLC program
Structure of robot program
Hardware interface - System signals- Safety signals
Software interface - Signal exchange- Program number transfer
Learning objectives:
After the seminar, participants will know how to repair and service HIGHLINE high-pressure metering machines. They will be able tocarry out necessary maintenance and repair work independently and effectively within a short period of time.
Seminar contents:
III
Seminars for Technical Service and Maintenance
15
Target group
Maintenance servicers, service personnel, foremen and production managers
Number of participants
Three to eight people
Duration of seminar
Three days, each 9:00 – 16:00 hrs
Seminar fee
870.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
HIGHLINE [M-HL]We recommend that newcomers take part in the seminar on metering machine technology [G-HL]
Configuration of the HIGHLINE metering machine according to the diagrams (wet end and hydraulic system)
Safety equipment and its function
How to check and fill hydraulic bladder accumulators
Basic requirements for operating the machine (energy supply)
Maintenance and repair of the tank periphery (refill pump)
Replacement of the shaft seals on the tank stirrer
How to check and replace component filters
How to check the sealing liquid system on the seals (Stirrer, metering pump, high / low pressure switching system)
Replacement of shaft seals on metering pumps
How to check and maintain the injectors
Instructions in performing the necessary maintenance work on the mixhead
How to handle the auxiliary tools for dismounting and mounting seals
Troubleshooting
How to handle the lubrication and maintenance instructions of the machine
16
Learning objectives:
After the seminar, participants will know how to repair and service TOPLINE HK high-pressure metering machines. They will be able tocarry out necessary maintenance and repair work independently and effectively within a short period of time.
III TOPLINE HK [M-TL]We recommend that newcomers take part in the seminar on metering machine technology [G-TL]
Target group
Maintenance servicers, service personnel, foremen and production managers
Number of participants
Three to eight people
Duration of seminar
Three days, each 9:00 – 16:00 hrs
Seminar fee
870.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
Seminar contents:
Configuration of the TOPLINE HK metering machine according to the diagrams (wet end and hydraulic system)
Safety equipment and its function
How to check and fill hydraulic bladder accumulators
Basic requirements for operating the machine (energy supply)
Maintenance and repair of the tank periphery (refill pump)
Replacement of the shaft seals on the tank stirrer
How to check and replace component filters
How to check the sealing liquid system on the seals (Stirrer, metering pump, high / low pressure switching system)
Replacement of shaft seals on metering pumps
How to check and maintain the injectors
Instructions in performing the necessary maintenance work on the mixhead
How to handle the auxiliary tools for dismounting and mounting seals
Troubleshooting
How to handle the lubrication and maintenance instructions of the machine
17
Learning objectives:
After the seminar, participants will know how to repair and service STREAMLINE high-pressure metering machines. They will be able tocarry out necessary maintenance and repair work independently and effectively within a short period of time.
III STREAMLINE [M-STL]We recommend that newcomers take part in the seminar on metering machine technology [G-STL]
Seminar contents:
Configuration of the STREAMLINE metering machine according to the diagrams (wet end and hydraulic system)
Safety equipment and its function
How to check and fill hydraulic bladder accumulators
Basic requirements for operating the machine (energy supply)
How to check the compressed air driers (option)
Maintenance and repair of the tank periphery (vacuum, refilling and diaphragm pump)
How to check and replace component filters
How to check the function of the feed pumps
How to check the function of the metering pumps
How to check and maintain the injectors
Instructions in performing the necessary maintenance work on the mixhead
Troubleshooting
How to handle the lubrication and maintenance instructions of the machine
Target group
Maintenance servicers, service personnel, foremen and production managers
Number of participants
Three to eight people
Duration of seminar
Three days, each 9:00 – 16:00 hrs
Seminar fee
870.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
18
Learning objectives:
After the seminar, participants will know how to repair and service ELASTOLINE F and ELASTOLINE V low-pressure metering machines.They will be able to carry out necessary maintenance and repair work independently and effectively within a short period of time.
III ELASTOLINE V/F [M-EL]We recommend that newcomers take part in the seminar on metering machine technology [G-EL]
Seminar contents:
Configuration of the ELASTOLINE metering machine according to the diagrams (wet end and hydraulic system)
Safety equipment and its function
How to check and fill hydraulic bladder accumulators
Basic requirements for operating the machine (energy supply)
How to check the compressed air driers
Maintenance and repair of the tank periphery (vacuum, refilling and diaphragm pump)
How to check the tank temperature control system (air or oil)
How to check and replace component filters
How to check the function of the metering pumps
How to check and maintain the injectors
Maintenance work on the MEL stirrer mixhead
Troubleshooting
How to handle the lubrication and maintenance instructions of the machine
Target group
Maintenance servicers, service personnel, foremen and production managers
Number of participants
Three to eight people
Duration of seminar
Three days, each 9:00 – 16:00 hrs
Seminar fee
870.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
19
Practical Seminars on Automation Technology
Learning objectives:
The participant will learn the basic configuration and practical use of wiring diagrams, terminal strips and parts lists using the exampleof a TOPLINE HK machine. The troubleshooting and maintenance software tools (PLC restore and back-up functions) will be presented to the participant and explained with the help of practical examples. Moreover, the function of standardized interfaces between reactioncasting machines and dry parts will be explained.
IV Practical seminar on automation technology [P-A]Setup of hardware, use of software and system interfaces
Target group
Maintenance electricians and project engineers
Number of participants
Three to eight people
Duration of seminar
One day, 9:00 – 16:00 hrs
Seminar fee
450.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
Seminar contents:
Structural setup of wiring diagrams using the example of a TOPLINE HK machine
Reading of wiring and terminal diagrams
Assembly layouts of mounting plates
Parts list structure using the example of a TOPLINE HK machine
Presentation of troubleshooting and maintenance software tools for the PLC system
Overview of software structure using the example of a TOPLINE HK machine
How to restore or backup the control program using a programming device or memory cards for the PLC and OP device e.g.
Structure of operating instructions
Remote service function via the 360°TROUBLESHOOTING MP Router
Overview of software structure using the example of a TOPLINE HK machine
Hardware configuration and function of the standardized interface between reaction casting machine and dry parts or robots
20
Learning objectives:
The participants will learn how the visualization software for Hennecke moulded foam lines is set up and handled in practice. The software structure and its data management system are explained. Moreover, the hardware and communication possibilities withthe PLC control units are presented. Participants will also be taught how to operate the PURTRONIC including its individual componentsand options on the basis of practical examples.
Seminar contents:
IV
Hardware structure
Communication with the PLC control units
Creation of a hard disk image
Remote service function via the 360°TROUBLESHOOTING MP Router
Backup/Restore function
Operating instructions
Operation of the PURTRONIC
Process Control Center with user/access rights management
Alarms and evaluation possibilities
Setpoints/tolerances for process control
Machine control parameters
Production programs
Machine switch for machine control
Actual values/fast process measurements for testing the machine
Histories for the offline analysis of past processes
Calibration of the sensors on the machine
Options
Online robot correction without knowledge of robots
Hennecke process analysis available via network in the office environment
Automated data export for long-term data recording or customer evaluation
Target group
Newcomers, machine fitters, machine operators, maintenance servicers and production managers
Number of participants
Three to eight people
Duration of seminar
One day, 9:00 – 16:00 hrs
Seminar fee
450.00 euros per participant (excl. VAT)
Please contact us and arrange a personal appointment with one of our study advisors.
PURTRONIC [P-PTC]Operation and handling of the PURTRONIC visualization software
21
Customized Seminars
V Special machines Further special seminars and special subjects are possible. The terms and conditions for our customized seminars are available on request
MICROLINE
Operation and setting of the MICROLINE metering machine. Designation of the components and knowledge of their function and operation. Setting and changing of production parameters. Setting of the output rates on the pumps. Adjusting the meteringpressure on the injectors / mixhead.
TOPLINE HK-MF (multi-component)
Operation and setting of the TOPLINE HK-MF metering machine with four or six components. Designation of the components andknowledge of their function and operation. Setting and changing of production parameters. Setting of the output rates on the pumps.Adjusting the metering pressure on the injectors / mixhead.
TOPLINE HT
Operation and setting of the TOPLINE HT metering machine. Designation of the components and knowledge of their function and operation. Setting and changing of production parameters. Setting of the output rates on the plunger pumps. Adjusting the meteringpressure on the injectors / mixhead.
HK-R 5000
Operation and setting of the HK-R 5000 metering machine. Designation of the components and knowledge of their function and operation. Setting and changing of production parameters. Overview of the special features of the stirrer mixhead and tandem metering pumps.
CARBOMAT
Operation and setting of the CARBOMAT blowing agent metering unit. Designation of the components and knowledge of their function and operation. Setting and changing of production parameters. Specific advantages / saving potential of the blowing agentmetering unit.
AEROMAT GU /ST
Operation and setting of the AEROMAT gas loading device. Designation of the components and knowledge of their function and operation. Setting and changing the production parameters.
PENTAMAT 30i / 50i
Operation and setting of the PENTAMAT blowing agent metering unit. Designation of the components and knowledge of their functionand operation. Setting and changing the production parameters.
22
V Plant technologyFurther special seminars and special subjects are possible. The terms and conditions for our customized seminars are available on request
Sandwich Panel Lines
Operation and setting of CONTIMAT lines. Get to know the special features of the plant's wet end. Setting and changing of production parameters.
Refigerator Lines
Operation and setting of refigeration appliance lines. Get to know the special features of the plant's wet end. Setting and changing of production parameters.
Slabstock Lines
Operation and setting of slabstock lines. Get to know the special features of the plant's wet end. Setting and changing of production parameters.
Moulded Foam Lines
Operation and setting of moulded foam lines. Get to know the special features of the plant's wet end. Setting and changing of production parameters.
Hotel Recommendations
Europaplatz 16Phone: +49 22 41 / 99 99 9-0 · Fax: +49 22 41 / 99 99 9-9www.hotel-herting.de
Room/Night incl. breakfast from 80,00 euros - 102,00 euros
Kaiserstr. 80Phone: +49 22 41 / 17 23-0 · Fax. +49 22 41 / 17 23-50www.kaiserhof-siegburg.de
Room/Night incl. breakfast from 70,00 euros - 95,00 euros
Konrad-Adenauer-Straße 100Phone: +49 22 41 / 39 88-0 · Fax: +49 22 41 / 39 88 88www.gcbonn.de
Room/Night incl. breakfast from 74,00 euros
Reutherstr. 1 a-cPhone: +49 22 42 / 87 60 · Telefax: +49 22 42 / 87 61 99www.euro-park-hotel.de
Room/Night incl. breakfast from 74,00 euros - 89,00 euros
Zeithstraße 110Phone: +49 22 41 / 8 46 40-0 · Fax: +49 22 41 / 8 46 40-444www.friendly-cityhotel-siegburg.de
Room/Night incl. breakfast from 87,00 euros - 165,00 euros
Mühlenstraße 32-44Phone: +49 22 41 / 5 47-0 · Fax: +49 22 41 / 5 47-444www.kranzparkhotel.de
Room/Night incl. breakfast from 107,00 euros - 144,00 euros
Hotel Herting
53721 Siegburg
Hotel Kaiserhof
53721 Siegburg
Gut GrossenbuschGolf Course Hotel
53757 Sankt Augustin
Euro Park Hotel
53773 Hennef
Cityhotel Oktopus
53721 Siegburg
Kranz Parkhotel
53721 Siegburg
24
25
Directions
Main entrance
Receiving department / Shipping department
Truck access only via "Zur Kleinbahn"
Conditions of Participation for training courses and seminars (as of August 2013)
General, scope
Hennecke GmbH`s Conditions of Participation apply to entrepreneurs (§ 14 German Civil Code), public-sector legal entities or special bodies or funds under public law (hereinafter referred to as “participants”) for all of our trainings, seminarsand courses etc. (hereinafter referred to as “courses”). We do not accept any terms and conditions of the participant.
Registration
All our offers for courses are subject to confirmation and are non-binding. The participant’s registration is deemed to be a binding offer of contract. Incoming applications will be considered in chronological order until the maximum number of participants has been reached.
Prices and services
The participation fees as stated in the respective seminar description shall apply. The fees do not include the applicable VAT.The participation fee shall be due without deduction after the issuance of the invoice. The fees include all costs for instructionmaterial, use of technical equipment, beverages during the breaks and (in case of whole-day events) a lunch in our canteen. The participant shall bear all costs for travel and accommodation. Each participant shall receive a certificate after successfullycompleting the course. The course description complies with the state at the time of printing. We reserve the right to updateand enhance the agenda of the course
Cancellation and postponement of courses
We reserve the right to cancel, postpone or combine courses in cases of insufficient number of participants, shortfall of trainers,force majeure or any other reasons beyond our control. The participant will be informed immediately and payments already effected will be reimbursed.
Cancellation by the participant
After confirmation of a participant's registration by us, requests for cancellation must be made in writing. If a participant cancels more than 14 days before the course begins, we will charge 50 percent of the participation fees. We will charge 100 percent of the fees if we receive the cancellation less than 14 days before the course begins. We will not, however, charge anylump-sums for cancellations if the participant appoints a replacement for the person not being able to take part in the course. If a participant does not attend a course without giving prior notice, the full fees shall become due.
Liability
If we are in breach of material contractual obligations, i.e. contractual obligations the performance of which characterizes thecontract and which are necessary for its proper implementation, we shall be liable in accordance with the statutory provisions.For all other breaches of duty we shall only be liable for damages caused by intentional or grossly negligent acts or omissionsof our statutory representatives (“gesetzlicher Vertreter”) or any persons engaged by us to assist us in complying with our obligations in terms hereof (“Erfüllungsgehilfen”). In the absence of intentional conduct, we shall be liable only for reasonablyforeseeable damage that occurs. The foregoing shall neither effect the liability of the Supplier under the German Product Liability Act (Produkthaftungsgesetz), nor its liability for culpable (“schuldhaft”) injury to life, body or health. If a guarantee hasbeen assumed the Supplier shall be liable in accordance with the statutory provisions.
Accommodation
A list of accommodations is included in our seminar catalogue. If a participant needs a room, he will book a room directly withthe respective hotel.
Information and Technical Advice
Information and recommendations provided by the Supplier (whether included in instruction materials or orally) are not bindingand are made excluding all liability unless the Supplier has expressly and in writing undertaken otherwise.
Choice of law, Court of jurisdiction
German law shall apply. The court of jurisdiction shall be Cologne. In addition, we shall be entitled to assert our claims at the participant’s place of general jurisdiction.
26
27
* T
he c
onne
ctio
n co
sts
amou
nt to
20
Cent
per
cal
l/fa
x fro
m th
e Ge
rman
fixe
d ne
twor
k or
60
Cent
per
cal
l fro
m th
e Ge
rman
cel
lula
r net
wor
k. T
he a
mou
nt c
harg
ed m
ay v
ary
whe
n ca
lling
from
oth
er c
ount
ries.
Application Form
Course participant:
Name Seminar code Date
Place/Date Signature/Company stamp
Our general participation conditions for training courses and seminars apply (see page 26).
Please send Hennecke your application form:
- By fax + 49 1806 / 339 201* - By Email [email protected]
-
Name Seminar code Date
-
Name Seminar code Date
-
Applicant:
Company
Address
Contact person
Tel. Fax
>> The application form can also be found online at www.hennecke.com/en/services/360/trainings
1000
DM
A 10
/15
REPL
C //
SG 1
2.1
Contact our service experts directly to find out more about our 360°TRAININGS – by e-mail or phone. We 'll be happy to hear from you!
Hotline 339-200+ 49 1806
+ 49 2241 / 339-360Technical Service Support
www.hennecke.com/360Internet
Email [email protected]
Fax + 49 1806 / 339-201
1
21
1 The connection costs amount to 20 Cent per call / fax from the German fixed network or 60 Cent per call from the German cellular network. The amount charged may vary when calling from other countries. 2 The technical service support team can be reached on business days from 7 a.m. to 5 p.m. German time. Additional call charges from your telecommunications provider may be incurred.
360˚SERVICE
The information in this brochure is given in good faith, however withoutengagement. Design subject to alterations. The illustrations and photosin this brochure do not reflect the scope of supply!
Hennecke GmbH · Birlinghovener Str. 30 · 53757 Sankt Augustin (Germany)Email: [email protected] · See www.hennecke.com for worldwide locations