Download - Standard Assembly ABTCP 2013
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
1
CUSTOM ASSEMBLY OPTIONS AND REqUESTCUSTOM ASSEMBLY
OCTOBER 8-10, 2013 - Transamérica Expo Center - São Paulo - SPwww.abtcp2013.org.br
Arranged by Co-sponsor
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
PUL AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
46th
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
2
Propórtio Montagens e Promoções Ltda. was selected to design and assembly ABTCP 2012
custom stands, taking into account the environment aesthetics, the participants’ comfort and
operation functionalities, to keep the quality standard and homogeneity of facilities adapted to
TEC conditions.
Note: A fine shall be charged in case of termination after assembly is contracted.
Models of custom assembly will be available - box, corner and edge of island - which can be re-
quested by filling up the form Selection of Assembly Type – available at the event hotsite www.
abtcp2013.org.br – Exhibitor Area – Manual/Forms, until 07/12/2013. Payment should be
made by bank slip printed by the exhibitor directly from the event site, on 08/12/13.
Additional items and/or small changes should be negotiated directly with the contracted Assem-
bler. Pay attention to the required area when defining the model.
All EXIBITOR shall maintain in its stand, from the assembly start to the event presentation and
to final disassembly at least one fire extinguisher provided with a charge consistent with the
exhibited products and material used on stand assembly. See further information on page 34 –
item 19 – Fire Extinguisher.
Any Exhibitor requesting the custom assembly may also request, in “Fire Extinguisher Request”
form the location of the fire extinguisher. Related cost amounts to R$ 60.00 for each fire extin-
guisher during the three days of event,
Collection will be made by bank slip created by the electronic manual.
Because this is a reimbursement of expense, ABTCP shall not issue an invoice.
Because of plumbing release, all projects should contain raised floor (10 cm, minimum), inclu-
ding custom assembly projects.
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
3
Standard models are shown below:ATTENTION: For options 3 to 10, the identification in the frontlet will be made by sticking
the exhibitor logo. The deadline for sending the logo art is 16/08/2013 and it must be sent to
Propórtio, to the following e-mail: [email protected]. If the exhibitor fails to meet this
deadline he will lose the right to place the logo in the frontlet and will be identified with the
Fantasy Name registered in the system only. In case the exhibitor wishes to include the logo
after the deadline, he must get in touch directly with Fabiani, from Proportio (please see contact
details on page 67) and there will be an additional cost.
Event Official Suplier:
Company: Propórtio Montagens e Promoções Ltda
Contact: Fabiani Araújo
Phone: (11) 3857-7763
E-mail: [email protected]
Form Deadline: 07/12/2013
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
4
OPTION 1: BOX BASIC ASSEMBLY
OPTION 2: CORNER BASIC ASSEMBLY
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
5
DESCRIPTION Of OPTION 1 AND OPTION 2Booth Configuration: No area limitation (booth m2)
Booth Color: Check on page 66 the list of available colors for your booth. It will be necessary to fill out the name of the chosen color in form “Selection of Type of Assembly”.
Floor: graphite padding carpet onto elevated floor, 10 cm high
Walls: modular partitions with structure in black anodized aluminum, with closing panels, in gray color. 3.23 m high.
Storage: with door. There will be an increase of 1m2 for each 30m2 of booth area. Pergola: Partial structure of 16 cm high sleepers over the booth, where lighting will also be placed. Final pergola height will be 3.07 m.
Frontage: modular partitions with structure in black anodized aluminum, with closing colored panels and visual communication.
Identification: Helvetica letters, 10 cm high, in black, up to the limit of 14 letters, applied on a 2.00m x 0.50 m panel
Lighting: with 100W light spots, in the proportion of 100W for each 3 m2.
Sockets: 01 monophase 220V socket, with 0.5 KVA capacity.
Furniture Option 1 and Option 2:
• 01 round glass table with 03 fixed upholstered chairs;
• 02 racks;
• 01 modular desk;
• 01 stool;
• 01 rubbish bin.
For booths larger than 30 m2, the number of tables and chairs will be doubled at each 30 m2 of booth area.
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
6
OPTION 3: BOX INTERMEDIATE ASSEMBLY
OPTION 4: CORNER INTERMEDIATE ASSEMBLY
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
7
DESCRIPTION Of OPTION 3 AND OPTION 4Booth Configuration: No area limitation (booth m2)
Booth Color: Check on page 66 the list of available colors for your booth. It will be necessary to fill out the name of the chosen color in form “Selection of Type of Assembly”.
Floor: graphite padding carpet onto elevated floor, 10 cm high
Walls: modular partitions, assembled in octagonal aluminum system, with closing white TS panels. 3.23 m high.
Storage: with door. There will be an increase of 1m2 for each 30m2 of booth area. Pergola: Partial structure of 16 cm high sleepers over the booth, where lighting will also be placed. Final pergola height will be 3.07 m.
Frontage: modular partitions assembled in octagonal aluminum system, with spider system closing, coated with standard green color. 0.50 m high.
Identification: Logo in cut vinyl sticker with up to 4 colors, applied on white colored adhesive plate. Logo must be forwarded until 16/08/2013. Sending instructions on page 55.
Specifications of logo art:
• jpg images, with 100% size of 100x50cm, with 150 dpis.
• Image in cdr (corel) or .ai (Ilustrator), in curves
Lighting: with 100W light spots, in the proportion of 100W for each 3 m2.
Sockets: 01 monophase 220V socket, with 0.5 KVA capacity.
Furniture Option 3 and Option 4:
• 01 round glass table with 03 fixed upholstered chairs;
• 02 racks;
• 01 modular desk;
• 01 stool;
• 01 rubbish bin.
For booths larger than 30 m2, the number of tables and chairs will be doubled at each 30 m2 of booth area.
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
8
OPTION 5: PLUS BOX ASSEMBLY - UP TO 39M2
OPTION 6: PLUS CORNER ASSEMBLY - UP TO 39M2
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
9
DESCRIPTION Of OPTION 5 AND OPTION 6Booth Configuration: For booths with up to 39 m2 only.
Booth Color: Check on page 66 the list of available colors for your booth. It will be necessary to fill out the name of the chosen color in form “Selection of Type of Assembly”.
Floor: graphite padding carpet onto elevated floor, 10 cm high
Walls: modular partitions, assembled in octagonal aluminum system, coated with spider system, white adhesive. 3.23 m high.
Storage: with door. There will be an increase of 1m2 for each 30m2 of booth area. Pergola: Partial structure of 16 cm high sleepers over the booth, where lighting will also be placed. Final pergola height will be 3.07 m.
Frontage: modular wood partitions assembly, coated with standard green color napa. 0.50 m high.
Totem assembly with modular wood partitions, coated with standard green color napa. 0.50 m wide.
Identification: Logo in cut vinyl sticker with up to 4 colors, applied on white colored PS plate + identification or site in cut vinyl adhesive with up to 4 colors, applied on totem. 0.50m high. Logo must be forwarded until 16/08/2013. Sending instructions on page 70.
Specifications of logo art:
• jpg images, with 100% size of 100x50cm, with 150 dpis.
• Image in cdr (corel) or .ai (Ilustrator), in curves
Lighting: with 100W light spots, in the proportion of 100W for each 3 m2.
Sockets: 01 monophase 220V socket, with 0.5 KVA capacity.
Furniture Option 5 and Option 6:
• 01octagonal assembled aluminum desk
• 01 glass table
• 03 fixed chairs;
• 01 stool;
• 01 rubbish bin.
For booths larger than 30 m2, the number of tables and chairs will be doubled at each 30 m2 of booth area.
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
10
OPTION 7: PLUS ASSEMBLY - EDGE Of ISLAND fOR AREAS fROM 40 M2 TO 60M2
OPTION 8: PLUS ASSEMBLY - ISLAND fOR AREAS fROM 40 M2 TO 60M2
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
11
DESCRIPTION Of OPTION 7 AND OPTION 8Booth Configuration: For booths with areas from 40 m2 to 60m2
Booth Color: Check on page 66 the list of available colors for your booth. It will be necessary to fill out the name of the chosen color in form “Selection of Type of Assembly”.
Floor: graphite padding carpet onto elevated floor, 10 cm high
Walls: modular partitions, with natural anodized aluminum structure, with adhesive spider system closing. 3.23 m high.
Pergola: Partial structure of 16 cm high sleepers over the booth, where lighting will also be placed. Final pergola height will be 3.07 m.
Frontage: modular wood partitions assembly, coated with adhesive spider system in standard white color. 1.00 m high.
Totem assembly with modular wood partitions, coated with translucent adhesive spider system.
Identification: Logo in cut vinyl sticker with up to 4 colors, applied on the frontage. Logo must be forwarded until 16/08/2013. Sending instructions on page 55.
Specifications of logo art:
- jpg images, with 100% size of 200x100cm, with 150 dpis.
- Image in cdr (corel) or .ai (Ilustrator), in curves
Lighting: with 20W light rails, in the proportion of 20W for each 2 m2.
Sockets: 02 monophase 220V sockets, one in the room, another in the storage, with 0.5 KVA capacity each.
Furniture Option 7 and Option 8:
• 01 round glass table with 03 fixed upholstered chairs;
• 01 bar desk with stool
• 02 bistro type tables with 3 stools each;
• 01 rubbish bin
• 01 cabinet with keys
• 01 two-seater sofa, 01 armchair and 01 corner table.
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
12
OPTION 9: PLUS ASSEMBLY - ISLAND fOR AREAS fROM 61 M2 TO 99 M2
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
13
DESCRIPTION Of OPTION 9Booth Configuration: For booths with areas from 61 m2 to 99m2
Booth Color: Check on page 66 the list of available colors for your booth. It will be necessary to fill out the name of the chosen color in form “Selection of Type of Assembly”.
Floor: graphite padding carpet onto elevated floor, 10 cm high
Walls: modular partitions, with natural anodized aluminum structure, with adhesive spider system closing. 3.23 m high.
Frontage: modular wood partitions assembly, coated with adhesive spider system in standard white color. 1.00 m high.
Totem assembly with modular wood partitions, coated with translucent adhesive spider system.
Identification: Logo in cut vinyl sticker with up to 4 colors, applied on the frontage. Logo must be forwarded until 16/08/2013. Sending instructions on page 55.
Specifications of logo art:
• jpg images, with 100% size of 200x100cm, with 150 dpis.
• Image in cdr (corel) or .ai (Ilustrator), in curves
Lighting: with 20W light rails, in the proportion of 20W for each 2 m2.
Sockets: 03 monophase 220V sockets, two in the room, another in the storage, with 0.5 KVA capacity each.
Furniture Option 9:
• 01 round glass table with 03 fixed upholstered chairs;
• 01 bar desk with stool
• 04 bistro type tables with 3 stools each;
• 01 rubbish bin
• 01 cabinet with keys
• 02 two-seater sofas, 02 armchairs and 02 corner tables.
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
14
OPTION 10: PLUS ASSEMBLY - fOR AREAS ABOvE 100 M2
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
15
DESCRIPTION Of OPTION 10Booth Configuration: For booths with areas above 100m2
Booth Color: Check on page 66 the list of available colors for your booth. It will be necessary to fill out the name of the chosen color in form “Selection of Type of Assembly”.
Floor: graphite padding carpet onto elevated floor, 10 cm high
Walls: modular partitions, with natural anodized aluminum structure, with adhesive spider system closing. 3.23 m high.
Pergola: Partial structure of 16 cm high sleepers over the booth, where lighting will also be placed. Final pergola height will be 3.07 m.
Frontage: modular wood partitions assembly, coated with adhesive spider system in standard white color. 1.00 m high.
Totem assembly with modular wood partitions, coated with translucent spider system.
Identification: Logo in cut vinyl sticker with up to 4 colors, applied on the frontage. Logo must be forwarded until 16/08/2013. Sending instructions on page 55.
Specifications of logo art:
• jpg images, with 100% size of 200x100cm, with 150 dpis.
• Image in cdr (corel) or .ai (Ilustrator), in curves
Lighting: with 20W light rails, in the proportion of 20W for each 2 m2.
Sockets: 06 monophase 220V sockets, two in the room, two in the storage and two in the lounges, with 0.5 KVA capacity each.
Furniture Option 10:
• 01 rectangular table with 06 fixed upholstered chairs;
• 01 bar desk with stool
• 06 bistro type tables with 3 stools each;
• 01 rubbish bin
• 01 cabinet with keys
• 04 two-seater sofas, 04 armchairs and 04 corner tables
• 01 reception desk with stool
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
16
COLOR OPTIONS:
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
17
Please find below the m2 value for the projects presented here. These values include the itens described in each project model (above).
Custom Booth Models Value/m2
Option 1 – Box Basic Assembly R$ 170,00/m²
Option 2 – Corner Basic Assembly R$ 170,00/m²
Option 3 – Intermediate Box Assembly R$ 230,00/m²
Option 4 – Intermediate Corner Assembly R$ 230,00/m²
Option 5 – PLUS Box Assembly up to 39m2 R$ 320,00/m²
Option 6 – PLUS Corner Assembly up to 39m2 R$ 320,00/m²
Option 7-PLUS Edge of Island Assembly for areas from 40m2 to 60m2 R$ 380,00/m²
Option 8– PLUS Island Assembly for areas from 40m2 to 60m2 R$ 380,00/m²
Option 9- PLUS Island Assembly for areas from 61m2 to 99m2 R$ 380,00/m²
Option 10- PLUS Island Assembly for areas above 100m2 R$ 380,00/m²
Floor Additional – White Vinyl R$ 40,00/m²
Floor Additional – White MDF R$ 60,00/m²
vALORES
PULP AND PAPER INTERNATIONAL CONGRESS AND EXHIBITION
46th
46TH PULP AND PAPER INTERNATIONAL CONGRESS & EXHIBITION
ABTCP 2013
CUSTOM ASSEMBLY
18
Event Official Suplier:Company: Propórtio Montagens e Promoções Ltda
Contact: Fabiani Araújo
Phone: (11) 3857-7763
E-mail: [email protected]
Form Deadline: 07/12/2013