-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
1/20
For driving and extracting
EXCAVATOR MOUNTEDVIBRODRIVERS
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
2/20
The increasing use of hydraulic excavators in piling
jobs, has motivated PTC to develop a complete
range of Vibrodrivers that are specifically designed
to be mounted directly on the stick of a wide range
of excavators.
PTC excavator mounted Vibrodrivers are efficient
hydraulic vibratory hammers that reduce the
cohesion of the soil through vibration, allowing to
easily drive or extract a variety of profiles, such as:
Sheet piles
H and I beams
Casings and tubes
Concrete piles
Wooden piles
PTC proposes as well different clamping systems,
accessories and connection options, allowing aperfect adaptation to the specificities of the job site
and the excavator.
4PHF Vibrodriverdriving 15 m long
H beams in an urban area, for the
construction of a new hospital.
For more than 80 years
PTC has been masteringvibration technology
and developing innovative
pile driving solutions:
THE VIBRODRIVERS
p.1
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
3/20
7PHFV Vibrodriverinstalling a 800 m long sheet pile wall to
reinforce the Loire river banks.
2PHFV Vibrodriverextracting 4 m beams,
under the strict vibratory regulations of a
gas plant.
p.2p.2
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
4/20
MAST ADAPTATION
RIVER BANKS
NARROW SPACES
RAILWAYS
APPLICATIONS
PTC excavator mounted Vibrodrivers
are used world wide in multipleapplications.
p.3
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
5/20
VIBRATION-SENSITIVE
AREAS
CUSTOMISED SOLUTION
REINFORCEMENT CAGES
FOR CAST IN-SITU PILES
CITY CENTERS
URBAN AREA
p.4
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
6/20
Vibrodriver moment (m.kg)
Excavator
Power (kW)
200
175
145
110
90
7060
30
Excavator
Tons
35
30
25
18
15
128
5
1
1PHF
15
15PH
2
2P
HFV
2PHF
3
3PHF
4
4PHF
6
6PHFV
7
7PHF
8
8PHFV
10
10PHF
10PHFV
13
13PH
28 160
EXCAVATORCONNECTION
(Power supplied
by the excavator).
What Vibrodriver for your excavator ?
PHFV High Frequency
and Variable moment vibrodrivers.
PHF High Frequency
and fixed eccentric moment vibrodrivers.
PH Standard Frequency
and fixed eccentric moment vibrodrivers.
Power and lightness
Vibrators with very light weight and
powerful eccentric moments.
High push/pull force.
Resonance-free
Vibrodrivers equipped with PTC patented
Variable Moment technology can perform
resonance-free piling works:
Resonance free start-up and stop-down.
Adjustable amplitude and driving speed.
The variation of the moment facilitates:
- the handling of the profile during
driving operations.
- a better control of profile verticality.
3 connection options
To allow perfect adaptation to the number
of circuits available on the excavator:
Hydraulic control.
Electric control.
Flow limitor.
Compact and slim
Ideal for piling jobs with reduced spaces
and low head room, such us in city
centres.
Minimal height to drive long profiles.
So slim that can drive in between
sheet piles.
Clamps adaptability
Agriplex clamps can be mounted at 90
to allow face working
A broad range of clamping heads to allow
the driving and extraction of:
- Sheet piles.
- H-beams.
- Wooden piles.
- Concrete piles. - Small tubes.
Simple operation
The Vibrodriver is powered by the
excavators hydraulic system.
The excavators operator controls
all parameters from the cabin.
EXCAVATOR MOUNTED
VIBRODRIVERS
Specifically designed forpiling and extraction works
using excavators.
p.5
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
7/20
Temps
PHFV Range
SWIVEL
Allows Vibrodriver rotation and facilitates profile positioning.
YOKEContains high absorbtion elastomers, for maximum
excavator protection. These elastomers are the result
of PT C research in reducing vibratory emissions.
GEAR BOX
Contains the eccentric pairs that produce the vibration.
CLAMPING HEAD
A variety of clamps are available
to adapt to any size and shape
of profile.
FORK ATTACHMENT
For easy Vibrodriver adaptation on all types of excavators.
Time
Vibratory emissions per vibrodriver range
Vibrationstotheenvironment
Starting Working time Stopping
PHFV range: with variable moment technology
PH range
PHF range
Phase shifterEccentric
Amplitude(mm)
Time
0
Amplitude(mm)
Time
0
Variable moment technology
Vibrodrivers of the PHFV range, are equipped with PTCs
variable moment technology, which enables to permanently control
the vibrations generated by the Vibrodriver.
Thus allowing to work in vibration-sensitive areas (city centers,
urban areas). The variable moment system consists of a phase
shifter that opposes the upper and lower eccentrics to adjust the
vibration, even down to zero (no vibration).
p.6
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
8/20
LW
CW
H
VIBRODRIVERS 1PHF 2PHF 3PHF 4PHF 7PHF
FIXED OR VARIABLE MOMENT FIXED ECCENTRIC MOMENT
ECCENTRIC MOMENT m.kg 0.7 2.1 3 4 6.5
HYDRAULIC POWER AT 350 BAR kW / HP 21 / 29 44 / 60 54 / 74 68 / 93 85 / 115
OIL FLOW L / min 26 76 93 117 145
MAX. WORKING PRESSURE bar 350 350 350 350 350
MAX. FREQUENCY Hz / rpm 50 / 3000 45 / 2700 48.3 / 2900 43.3 / 2600 38.3 / 2300
MAX. CENTRIFUGAL FORCE kN 70 171 282 302 384
MAX. LINE PULL CAPACITY kN 25 60 60 60 120
VIBRATING WEIGHT WITHOUT CLAMP kg 171 475 495 510 670
TOTAL WEIGHT WITHOUT CLAMP kg 185 710 735 780 1060
MAX. AMPLITUDE mm 8.2 8.8 12.1 15.7 19.4
LENGTH (L) m 0.480 1.038 1.038 1.038 1.185
MAX. WIDTH (W) m 0.430 0.586 0.586 0.586 0.615
CENTER WIDTH (CW) m 0.240 0.330 0.330 0.330 0.330
HEIGHT WITHOUT CLAMP (H) m 0.450 0.800 0.800 0.800 1.080
RECOMMENDED CLAMPING HEAD
CLAMP FOR SHEET PILES Agriplex 22 t Agriplex 22 t Agriplex 40 t Agriplex 40 t Agriplex 60 t
CLAMP FOR SHEET PILES - - - - Tiltex 60 t
CLAMP FOR CASINGS - - - - Duplex 2 x 42 t
MIN. AND MAX. CASING DIAMETER mm - - - - 190 / 1000
CLAMP FOR CONCRETE / WOODEN PILES - - - - Multigrip 60 t
CONTROLS EQUIPMENT AND ACCESSORIES
FLOW LIMITOR Standard Standard Standard Standard Standard
ELECTRIC CONTROL - Option Option Option Option
HYDRAULIC CONTROL - Option Option Option Option
ACCESSOIRES
GOOSENECK STICK - Option Option Option Option
FORK ATTACHMENT - Option Option Option Option
STORAGE SUPPORT Option Option Option Option Option
PH / PHF / PHFV RANGE
Excavator mounted
Vibrodrivers.Outstandingly compact and powerful Vibrodrivers to be mounted on hydraulic excavators. Ideal to drive
sheet piles, H-beams and casings in urban projects with reduced spaces.
PHFV Range: High Frequency & Variable eccentric moment
PHF Range:High Frequency & Fixed eccentric moment
PH Range: Standard Frequency & Fixed eccentric moment
p.7
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
9/20
10PHF 13PH 15PH 2PHFV 6PHFV 8PHFV 10PHFV
FIXED ECCENTRIC MOMENT VARIABLE ECCENTRIC MOMENT
10 13 15 0 - 1.9 0 - 6 0 - 8 0 - 10
110 / 150 115 / 157 123 / 166 47 / 64 86 / 117 110 / 149 121 / 164
189 198 210 81 148 188 207
350 350 350 350 350 350 350
35 / 2100 3.8 / 1850 28 / 1680 48.3 / 2900 39.2 / 2350 39.2 / 2350 38.3 / 2300
493 497 473 179 370 494 591
120 120 225 60 120 120 225
880 900 975 440 945 974 1020
1270 1290 1570 690 1382 1411 1620
22.7 28.9 30.8 8.6 12.7 16.4 19.6
0.920 0.920 1.205 1.150 1.310 1.310 1.310
0.734 0.734 0.740 0.450 0.623 0.623 0.623
0.380 0.380 0.380 0.250 0.345 0.345 0.380
1.077 1.077 1.206 0.900 1.300 1.300 1.466
Agriplex 60 t Agriplex 60 t Agriplex 60 t Agriplex 22 t Agriplex 60 t Agriplex 60 t Agriplex 90 t
Tiltex 60 t Tiltex 60 t - - Tiltex 60 t Tiltex 60 t -
Duplex 2 x 42 t Duplex 2 x 42 t Duplex 2 x 42 t - Duplex 2 x 42 t Duplex 2 x 42 t Duplex 2 x 42 t
190 / 1000 190 / 1000 190 / 1000 - 190 / 1000 190 / 1000 190 / 1000
Multigrip 60 t Multigrip 60 t Multigrip 60 t - Multigrip 60 t Multigrip 60 t Multigrip 60 t
Standard Standard Standard Option Option Option Option
Option Option Option Standard Standard Standard Standard
Option Option Option Option Option Option Option
Option Option Option Option Option Option Option
Option Option Option Option Option Option Option
Option Option Option Option Option Option Option
PTC reserves the right to modify the technical dat a without notice.
p.8
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
10/20
2 driving positions:
To work in reduced spaces,
the Agriplex can be
mounted perpendicular
to the Vibrodriver in
a 90 position that
allows to work
almost flush
against a wall.
AGRIPLEX 22 t 40 t 60 t 90 t
WEIGHT kg 85 220 264 330
FORCE kN 220 400 600 900
WORKING PRESS URE bar 320 320 320 320
MIN. H-BEAM SIZE type HEB140 HEB240 HEB320 HEB260
PTC reserves the right to modify the technical data without notice.
AGRIPLEX A - Length (mm) B - Width (mm) C - Height (mm) D - Opening (mm) Weight (kg) Clamping force (kN)
22 t 487 240 307 0-20 85 220
40 t 492 250 400 0-35 220 400
60 t 619 350 479 0-40 265 600
90 t 662 350 387 0-40 330 900
PTC reserves the right to modify the technical data without notice.
CLAMPING HEADS
A wide range
of clamping headsto match the diversity
of profile forms and sizes.
- Single sheet piles
- Double sheet piles
- H beams
- Ibeams
Agriplex clamp
p.9
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
11/20
Front view
Elevation view
Side view
3D view
22 t 40 t 60 t 90 t
240
110
330
170
250
190
330
210
200
100
200
126,5
120
190
260
190
215
260
130
300
100
200
210
M24
260
65
245
M30M30M24
260
487
352
115
92
,5
164,53
10
632
419
11
7
484
190
479
496.5
370
142
175
2254
00
662
437
200
514
142
245
p.10
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
12/20
351
400
36,5 36,5
472
406,5406,5
2 x 42 tFor casings of 190 to 1000 mm
DUPLEX 42 t
WEIGHT (including 1 m T-bar) kg 678
FORCE kN 840
WORKING PRESSURE bar 320
PTC reserves the right to modify the technical data without notice.
*Dimensions are given in mm.
For small casings
Duplex clamp
CLAMPING HEADS
A wide range
of clamping headsto match the diversity
of profile forms and sizes.
p.11
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
13/20
624
484
280 - 350
*Dimensions are given in mm.
MULTIGRIP 60 t Min. / Max. Min. / Max.
STANDARD mm 280 350 290 350
OPTION mm 210 280 230 290
OPTION mm 140 210 160 230
PTC reserves the right to modify the technical data without notice.
MULTIGRIP 60 t
WEIGHT kg 780
FORCE kN 600
WORKING PRESS URE bar 320
PTC reserves the right to modify the technical data without notice.
For concrete and wooden piles
Multigrip clamp
Adapted for round or square piles
978
840
261
400
1021
8
0
60 t
p.12
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
14/20
TILTEXCLAMP
Just tilt, lift and drive.
The Tiltex is a tilting clamp specially designed for excavator
mounted Vibrodrivers. It improves the handling of sheet piles and the
productivity of piling projects. With this tilting clamp, operators can
grab sheet piles stored on the ground and drive them directly without
any other handling operations.
How does Tiltex work?
The Tiltex key characteristic resides in the fact that it swivels in the horizontal position
in order to grab a sheet pile laid on the ground. After closing the clamping jaws, the
excavator operator raises the sheet pile from the ground and tilts the clamp at the same
time, until reaching the vertical position. Once the locking system is activated, the operator
positions the Vibrodriver and the sheet pile in the desired position and starts driving it.
An accessory that makes all the difference!
Tiltex is innovative due to the fact that it is simply an accessory. It is the first clamp thatswivels fully to grab and lift sheet piles from the ground.
This clamp offers an efficient and economical solution, because it remains an accessory
which can be easily mounted on existing PTC Vibrodrivers.onte sous les Vibrofonceurs
PTC existants.
1- Tilt the clamp and grab the sheet pile.
2- Lift the sheet pile.e.
3- Position the sheet pile.
4- Drive the sheet pile.
TILTEX 60 t
WEIGHT kg 488
FORCE kN 600
WORKING PRESSURE bar 320
PTC reserves the right to modify the technical data without notice.
The Tiltex 60 t can be mounted in a wide range of PT C Vibrodrivers:
6PHFV - 8PHFV - 7PHF - 10PHF - 13PH
*Dimensions are given in mm.
380
170
785
480
260
p.13
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
15/20
Handling: simplified and optimised..Theres no longer any need for an additional operator to thread a chain through the sheet pile or use any other basic lifting accessoriesto handle the sheet piles: the excavator operator controls all the parameters from the cabin. Safety is also improved during handling
operations, as less manual work is required.
p.14p.14
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
16/20
Ideal when there is only 1 circuit available on the
excavator. An electric control box is supplied
to easily control the Vibrodriverfrom the excavator cabin.
Electric control
The Vibrodriver is controlled from the cabin using
only one joystick.
Hydraulic control
The Vibrodriver is controlled from the cabin using at
least 2 joysticks (one controls the clamp, the other
controls vibration).
Flow limitor
CONTROLS & CONNECTIONS
Three control options for perfect
adaptation to the hydraulic circuitsavailable on the excavator.
Clamp closedClamp opened
Stop
Driving (vibrations)
Manifold block
Limiteur de dbit
Buck
etcir
cuit
Breake
rcirc
uit
Addition
alcir
cuit*
Breake
rcirc
uit
Addition
alcir
cuit*
Control box
Manifold block
Breake
rcirc
uit
*Only for PHFV Vibrodrivers: Additional circuit to control the amplitude.
*Only for PHFV Vibrodrivers: Additional circuit to control the amplitude.
p.15
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
17/20
The electric control monitors all Vibrodriver functions using only one circuit of the
excavator. This single circuit supplies hydraulic power with proper flow and pressure to
all the Vibrodriver circuits. The Vibrodriver is easily controlled from the cabin by
a control box:
A simple 3-button control box allows controlling:
Vibrations (hydraulic motor).
Clamp.
Amplitude (variable moment system of PHFV models).
Only 1 circuit is required to operate PHF or PHFV Vibrodrivers :
Breaker circuit.
The flow limitor makes sure the vibrodrivers maximum oil flow capacity is not surpassed,
thus guaranteeing driving efficiency and protecting the equipment. In addition, the
Vibrodriver can be mounted on excavators with different oil flow capacities, without
needing special adaptation.
2 circuits are required to operate the PHF Vibrodrivers :
Breaker circuit: for the Flow limitor, which controls the hydraulic motor (Vibrations).
Bucket circuit: for the clamp.
3 circuits are required to operate the PHFV Vibrodrivers :
Breaker circuit: for the Flow limitor, which controls the hydraulic motor (Vibrations). Bucket circuit: for the clamp.
Additional circuit:for the variable moment system of the vibrator,
which controls the amplitude.
The manifold block developed by PTC allows to control the Vibrodriver by using only
one joystick (vibration and clamps). The operator starts powering the Vibrodriver by
pushing forward the joystick to close the clamp. Then to start the vibration, the joystick
needs to be pushed all the way. To open the clamp the operator moves the joystick
backwards and reverses the flow.
1 circuit is required to operate PHF Vibrodrivers :
Breaker circuit (with two-way hydraulic flow).
2 circuits are required to operate PHFV Vibrodrivers :
Breaker circuit (with two-way hydraulic flow).
Additional circuit: for the variable moment system of the vibrator,
which controls the amplitude.
To obtain the best driving performance, it is key to choose the right excavator for the Vibrodriver (see table in page 5). You also need to
be sure that your excavator is able to keep a constant flow when another excavator circuit is being used and also when pressure goes up
to 300 bar.
p.16
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
18/20
709
990
2200
2000
650
439
680
550
300
650
561
195
Fork attachment
Gooseneck stick
ACCESSORIES
A variety of accessories
for better adaptationto the excavator
and the job site.
PTC has specially developped an extension arm for the
excavator boom that increases the lifting height of the
excavator by 2 m, thus allowing the driving of higher profiles.
The gooseneck is supplied with assembling pins and an attachment fork, which are
customised by PTC to the clients excavator model.
Gooseneck stick
p.17
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
19/20
The excavator arm measurements
(X,Y,Z) must be provided to PTC for
the customisation of the fork.
The storage support is a useful
accessory to save floor space on
the job site and to better
organize the vibrators of your
yard.
The fork attachment allows easy
mounting of the Vibrodriver on
the excavator arm.
PTC customises all fork attachments to
guarantee perfect fitting of the Vibrator on
the clients excavator model.
Storage supportFork attachment
For safety reasons, a chain should
be used to attach and secure the
sheet pile to the vibrator.
PTC supplies the chain with Vibrodrivers
equiped with Agriplex clamps.
Chain
p.18
-
7/23/2019 PTC Excavator Mounted Vibrodrivers WEB 09-2015
20/20
www.ptc.fayat.com
WORLDWIDE NETWORK
IN OVER 40 COUNTRIES
www.ptc.fayat.com
Septembe
r2015
PTC USA2000 Kentville Rd
61443 Kewanee IL - USA
Tel.: +1 309-852-6267
Fax: +1 888-977-0986
Email: [email protected]
PTC EXTRME ORIENT3 Tuas Avenue 16
638926 - Singapore
Tel.: +65 6861 7977
Tel.: +65 6861 6338
Fax: +65 6861 4514Email: [email protected]
PTC INDIAN OCEAN1333, Feng Pu Avenue, Fengxian District
201401 - Shanghai China
Tel.: +86 21 6176 8909
Fax: +86 21 6176 8910
Mob.: +86 186 1624 8309Email: [email protected]
PTC56 rue de Neuilly93136 Noisy-le-Sec Cedex France
Tel.: +33 (0)1 49 42 72 95
Fax: +33 (0)1 48 44 00 02
Email: [email protected]
QualityManagement
System
Certified.