PRIMERGY TX150 S6System configurator and order-information guide
Contents
Instructions
Configuration diagram
ConfiguratorSoftware Configurator IA32 and EM64T
I Basic unit
II Processor
III Memory
IV Graphics
V Accessible drives
VI Hard disk drives
VII SAS / SCSI Controller
VIII Disk array
IX Communication/Network
X System management options
XI Miscellaneous
XII Country specific power cords
Change report
PRIMERGY Server
May 2010
System configurator and order-information guide
PRIMERGY TX150 S6 Status 2010-04-30
Instructions
This document contains basic product and configuration information that will enable you to configure your system via
PC-/ System-Architect.
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.
You can configure your individual PRIMERGY server in order to adjust your specific requirements.
The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect
Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through
the configurator by following the lines from the top to the bottom.
Section III Memory, example
There are X memory slots which can be equipped with XXX MB.
It is permissible to make up to X passes through the memory upgrade options.
S26361-XXX-XXX S26361-XXX-XXX
Memory XXX MB Memory XXX MB
X times
max. X times per system max. X times per system
In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x
Please note that there are information symbols which indicate necessary information.
For further information see:
http://ts.fujitsu.com/products/standard_servers/index.html(internet)
https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx (extranet)
Prices and availability see price list and PC-/ System-ArchitectSubject to change and errors excepted
Fujitsu Technology Solutions x86 PRIMERGY Server 2 of 19
System configurator and order-information guidePRIMERGY TX150 S6 Status 2010-04-30
Configuration diagram PRIMERGY TX150 S6 SATA LFF (3.5") System Unit
System unit ( I )
SIDE VIEW FRONT VIEW
3 x HH 5.25" + FDD free or 2 x HH 5,25" + FDD free + Option A
or PS (I) 5.25" Slim Line
1. PSU 2. PSU CSS Option Redundant power supply option
5.25" x 1.6"
Modul 1
Xeon UP 5.25" x 1.6"
Modul 3
Modul 2
Accessible drives ( V )
Modul 4
Processor ( II ) optional CSS: (Option A)
Memory ( III ) - support for SL (0.5") DVD Drive + local View LED Display (CSS)
- occupies one 5.25" bay
Extension slots one DVD (slim line or standard) is mandatory
SCSI Controller ( VII )
Disk Array ( VIII )Communication/Network ( IX ) Hard disk drives ( VI )Miscellaneous ( X )
Slot 6 ( 3,3V ): PCIe x8, short
Slot 5 ( 3,3V ): PCIe x8, short
Slot 4 ( 3,3V ): PCIe x4, short
Slot 3 ( 5V ): PCI 32-Bit / 33MHz, short
Slot 2 ( 5V ): PCI 32-Bit / 33MHz, long
Slot 1 ( 5V ): PCI 32-Bit / 33MHz, long
Key:
Included in basic unit
Option
4x 3
,5"
HD
D F
ram
e
2.)
1.)
1.)
Bank 2
3.)
1.)
Syste
m F
an
4.)
4 P
CI-
Bu
sses
Standard Power Supply
Bank 1
3.5"x1" SATA
3.5"x1" SATA
3.5"x1" SATA
3.5"x1" FD Drive
3.5"x1" SATA
Fujitsu Technology Solutions x86 PRIMERGY Server 3 of 19
System configurator and order-information guidePRIMERGY TX150 S6 Status 2010-04-30
Configuration diagram PRIMERGY TX150 S6 SAS LFF (3.5") System Unit
System unit ( I )
SIDE VIEW FRONT VIEW
3 x HH 5.25" + FDD free or 2 x HH 5,25" + FDD free + Option A or
1 x HH 5.25" + FDD free + Option Cor PS (I)
5.25" Slim Line
1. PSU 2. PSU CSS Option 5.25" Slim Line Redundant power supply option
5.25" x 1.6"
Modul 1
Xeon UP 5.25" x 1.6" 5.25" x 1.6"
Modul 3
Modul 2
Accessible drives ( V )optional CSS: (Option A)
Modul 4 - support for SL (0.5") DVD Drive + local View LED Display (CSS)
Processor ( II ) - occupies one 5.25" bay
Memory ( III ) optional SAS LFF HDD extension Box: (Option C)
- support for
+ 2x 3.5" SAS HDD hot plug
Extension slots + SL (0.5") DVD Drive
+ CSS Option
SCSI Controller ( VII ) - occupies two 5.25" bays
Disk Array ( VIII )Communication/Network ( IX )Miscellaneous ( X ) one DVD (slim line or standard) is mandatory
Hard disk drives ( VI )
Slot 6 ( 3,3V ): PCIe x8, short
Slot 5 ( 3,3V ): PCIe x8, short
Slot 4 ( 3,3V ): PCIe x4, short
Slot 3 ( 5V ): PCI 32-Bit / 33MHz, short
Slot 2 ( 5V ): PCI 32-Bit / 33MHz, long
Slot 1 ( 5V ): PCI 32-Bit / 33MHz, long
Key:
Included in basic unit
Option
3.)
2.)
1.)
4 P
CI-
Bu
sses
1.)
1.)
4.)
Syste
m F
an
3.5"x1" FD Drive
Bank 1
Bank 2
Standard Power Supply
3.5"x1" SAS
3.5"x1" SAS
3.5"x1" SAS
3.5"x1" SAS
3.5"x1" SAS
3.5"x1" SAS
4x 3
,5"
HD
D F
ram
e
CSS Option
Fujitsu Technology Solutions x86 PRIMERGY Server 4 of 19
System configurator and order-information guidePRIMERGY TX150 S6 Status 2010-04-30
Configuration diagram PRIMERGY TX150 S6 SAS SFF (2.5") System Unit
System unit ( I )
SIDE VIEW FRONT VIEW
3 x HH 5.25" + FDD free or 2 x HH 5,25" + FDD free + Option A
or PS (I) 5.25" Slim Line
1. PSU 2. PSU CSS Option Redundant power supply option
5.25" x 1.6"
Modul 1
Xeon UP 5.25" x 1.6"
Modul 3
Modul 2
Accessible drives ( V )
Modul 4 optional CSS: (Option A)
Processor ( II ) - support for SL (0.5") DVD Drive + local View LED Display (CSS)
Memory ( III ) - occupies one 5.25" bay
Extension slots one DVD (slim line or standard) is mandatory
SCSI Controller ( VII )
Disk Array ( VIII )Communication/Network ( IX ) Hard disk drives ( VI )Miscellaneous ( X )
Slot 6 ( 3,3V ): PCIe x8, short
Slot 5 ( 3,3V ): PCIe x8, short
Slot 4 ( 3,3V ): PCIe x4, short
Slot 3 ( 5V ): PCI 32-Bit / 33MHz, short
Slot 2 ( 5V ): PCI 32-Bit / 33MHz, long
Slot 1 ( 5V ): PCI 32-Bit / 33MHz, long
Key:
Included in basic unit
Option
2.)
Standard Power Supply
Bank 1
Bank 2
4 P
CI-
Bu
sses
3.)
1.)
1.)
4.)
Syste
m F
an
3.5"x1" FD Drive
1.)
8x SFF HDD Frame
2.5" (SFF) SAS
2.5" (SFF) SAS
2.5" (SFF) SAS
2.5" (SFF) SAS
2.5" (SFF) SAS
2.5" (SFF) SAS
2.5" (SFF) SAS
2.5" (SFF) SAS
Fujitsu Technology Solutions x86 PRIMERGY Server 5 of 19
System configurator and order-information guideStart PRIMERGY TX150 S6 PRIMERGY TX150 S6 Status 2010-04-30
SW Configurator IA32
with OEM-Software without OEM-Software
for PRIMERGY Server for PRIMERGY Server
OEM-SW is bound to HW and
is not allowed to be ordered
separately.
For all SW products please refer to the corresponding software configurator accessible via
the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.
Microsoft - Software: **) PRIMECLUSTER *)
- Small Business Server 2003 - Clustering
- Windows Server 2003 R2, - Load Balancing
Standard Edition
Enterprise Edition
! Web Edition, SP2/English
- Additional loose Linux - Software: **)
Client-Access-Licenses (CALs) - Open Enterprise Server ***)
(not for Web Edition) - SuSE Linux ES (OEM): LO
- SuSE Linux ES (Support): LS
- Red Hat EL (OEM): LO
- Red Hat EL (Support): LS
Manageability Software: V**) Details eg. version numbers are published
- iRMC2 advanced Pack in the separate SW-Configurator
- RemoteDeploy
Backup-Software /
Application-Software: U
- ARCserve
***) Supply over distribution or procurement from FSC VP BC Software
They find single software configurators and release lists (OS-matrix / system management / security) under following addresses:
for internal users:for partners:
Continue with PRIMERGY
HW configurator
Fujitsu Technology Solutions x86 PRIMERGY Server 6 of 19
System configurator and order-information guideStart PRIMERGY TX150 S6 PRIMERGY TX150 S6 Status 2010-04-30
SW Configurator EM64T
with OEM-Software without OEM-Software
for PRIMERGY Server for PRIMERGY Server
OEM-SW is bound to HW and
is not allowed to be ordered
separately.
For all SW products please refer to the corresponding software configurator accessible via
the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.
Microsoft - Software: W Linux - Software *) **)
only - Windows Server 2003 R2, only - SuSE Linux ES (OEM): LO
EM64T Standard x64 Edition x86_64 - SuSE Linux ES (Support): LS
Enterprise x64 Edition - Red Hat EL (OEM): LO
- Additional loose - Red Hat EL (Support): LS
Client-Access-Lizenzen (CALs)
Details eg. version numbers are published
Manageability Software: V**) in the separate SW-Configurator
- iRMC2 advanced Pack
- RemoteDeploy
***) Supply over distribution or procurement from FSC VP BC Software
You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:
for internal users:for partners:
Continue with PRIMERGY
HW configurator
Fujitsu Technology Solutions x86 PRIMERGY Server 7 of 19
System configurator and order-information guide
Start PRIMERGY TX150 S6 PRIMERGY TX150 S6 Status 2010-04-30
Section I Basic unit
System unit, Rack and Floorstand, including:
* Lockable front door and sliding screen in floorstand version
sliding screen for accessible drive bays
Door for hot plug HDD bays
Both may be locked or sliding screen may be left open while door is still locked
* backplane with 4 bays for hot-plug HD's. Type depending on base unit:
Type 1: 4x hot plug LFF (3.5") SAS/SATA HDD (SAS/SATA LFF base units only)
Type 2: 8x hot plug SFF (2.5") SAS HDD (SAS SFF base units only)
* 1 power supply (Standard PS) or hot plug PSU
in addition there is an upgrade to hot plug redundant PSU available
* System fan ( No Hot-plug, No redundancy )
* 3 bays 5.25" for accessible drives (half Hight)
* 1 bay 3.5" for FDD
Systemboard with:
* One Xeon UP Dual- or Quad-Core CPU supporting 64Bit EM64T and Intel® VT / EIST / DBS Technology.
* Chipset Intel® 3210 (codenamed Bigby-P)
* 6 PCI slots: 2x PCIe x8, short (167mm max)
1x PCIe x4, short (167mm max)
3x 32Bit / PCI 33MHz, 2x long ( 5V )
* 4 memory slots for max. 8GB DDR2 / PC2-6400 RAM
2-way memory interleave technology => 2 banks with 2 slots each, max. 4GB modul per slot,
* SATA-Controller on board (supporting RAID 0/1; RAID 5 with iButton Option)
* 1 Gbit Ethernet LAN on board ( Bcom 5755 ) with TPM 1.2
and iSCSI boot integrated in System BIOS as selectable option
* iRMC S2 (integrated Remote Management Controller) on-board server management controller
with dedicated 10/100 Service LAN-port and
integrated graphics controller ( max. Resolution: 1600 x 1200 at 16 bpp)
Interfaces:
* 1x RS-232-C (9-pin) (usable for BMC or OS or shared)
* 1x RS-232-C (serial, 9pin), as option
* 1x Centronics (parallel, 25 pin, EPP/ECP compatible), as option
* 1x keyboard (PS/2)
* 1x mouse (PS/2)
* 1x VGA (15 pin)
* 8x USB 2.0 ( UHCI ) with 480MBit/s (4x external at the rear, 1x external at the frontside,
2x internal USB Interfaces for backup devices 1x internal Type A, no USB wakeup)
* 1x LAN RJ45, 1x Service-LAN RJ45
*internal Cables:
1. SATA cable for CD/DVD.
2. Cable for HDD Backplane
3. USB cable (for 1 internal Backup)
* PS/2 mouse (floorstand version only)
* ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates
* Documentation engl. (multilingual on CD)
A
Fujitsu Technology Solutions x86 PRIMERGY Server 8 of 19
System configurator and order-information guide
PRIMERGY TX150 S6 Status 2010-04-30
A
Floorstand-version Rack-version (5U)
Basic unit without CPU and Memory Basic unit without CPU and Memory
Including 1 power cord with inlet connector
for non-heating apparatus
- One CPU ( first CPU ) has to be configured - One CPU ( first CPU ) has to be configured
additionally for a base configuration additionally for a base configuration
- One memory kit has to be configured - One memory kit has to be configured
for a base configuration for a base configuration
- Mouse with two pushbuttons
SAS/SATA LFF (3.5") Floorstand-version with: SAS/SATA LFF (3.5") Rack-version with:
- 4-port SAS backplane for 4 hot plug - 4-port SAS backplane for 4 hot plug
LFF (3.5") SAS/SATA HDDs incl. cables for connection LFF (3.5") SAS/SATA HDDs incl. cables for connection
to the onboard SATA or plug in SAS controller to the onboard SATA or plug in SAS controller
- SAS/SATA LFF (3.5") Base Unit - SAS/SATA LFF (3.5") Base Unit
standard PSU S26361-K1081-V101 standard PSU S26361-K1081-V501
hot plug PSU S26361-K1081-V201 hot plug PSU S26361-K1081-V601
SAS SFF (2.5") Floorstand-version with: SAS SFF (2.5") Rack-version with:
- 8-port SAS backplane for 8 hot - 8-port SAS backplane for 8 hot
plug SFF (2.5") SAS HDDs incl. cables for connection plug SFF (2.5") SAS HDDs incl. cables for connection
to the plug in SAS controller to the plug in SAS controller
- SAS SFF (2.5") Base Unit - SAS SFF (2.5") Base Unit
standard PSU S26361-K1081-V301 standard PSU S26361-K1081-V701
hot plug PSU S26361-K1081-V401 hot plug PSU S26361-K1081-V801
S26361-F3436-E4 S26361-F3436-E4
no TPM no TPM
Disable function for Trusted Platform Disable function for Trusted Platform
Use according to import restrictions Use according to import restrictions
max. 1x per system max. 1x per system
B1 B2
The LFF Base Units offer onboard SATA
functionality for up to 4 HDD.
An additional SAS controller is required
if you need support for SAS HDD.
Fujitsu Technology Solutions x86 PRIMERGY Server 9 of 19
System configurator and order-information guide
PRIMERGY TX150 S6 Status 2010-04-30
B1 B2
S26361-F2735-E111 S26361-F2735-E105
No Rackmount-Kit option RMK-F1_TX150-S6
Only for loose deliveries telescopic rail, full extraction,
No mounting in Racks possible 1-hand-mounting
max. 1x per system consisting of
- 1 pair of telescopic rails
with easy-mounting-clips
- 1 bracket DC-PC-3rd-Rack
1x per system S26361-F2735-L105
RMK-F1_TX150-S6
for loose delivery
S26361-F2735-E7 S26361-F2201-E20
Cable management PC-Rack Cable arm 3rd P-Rack S26361-F2735-L7
- for FSC Primecenter / - for 3rd party Cable management PC-Rack
Datacenter Racks 1x per system for loose delivery
- not for 3rd party
1x per system S26361-F2201-L20
Cable arm 3rd party racks
for loose delivery
PRIMERGY PRIMECENTER-rack
SNP:SY-F1647E301-P
Installation ex works for one
server or subsystem.
Hereby the rack will be delivered PRIMERGY 42/23U rack
completely pre-mounted and PRIMERGY Classic 19" rack is not supported
all wired connections are tested.
With racks 12U, 24U, 38U: "Rack-mounting ex factory"
Systems and components This service is to be ordered once
will be delivered installed in the rack per installable server/storage
With racks 46U: subsystem, in order to get the
Systems and components server/storage subsystem
will be delivered separately mounted into the PRIMERGY racks.
To be ordered only together with In case of the 46 U PRIMERGY Rack,
a PRIMERGY PRIMECENTER rack this service has to be ordered,
e.g.: to get the mounting kits and the
S26361-K826-V10x cables installed.
refer configurator PC-Rack
max. 1x per System
For later conversion the following kits are available: FSC PC-/DC-/3rd party- Rack
1.) Conversion kit 2 Floor -> Rack S26361--F2618-L250
Conversion PRIMERGY TX150 S6 base unit floorstand into
base unit rack. Only conversion, no mounting kit. plus
Mounting kit has to be ordered seperatly
2.) Mounting Kit FSC PC-/DC-/3rd party- Rack S26361-F2735-L105
incl. DC- PC- bracket, no cable managment RMK-F1_TX150-S6
This kit will fit in server racks and
conforming to EIA standards EIA-310-D for 19" racks.
3.) cable management or cable arm
to be ordered additionally either one to be ordered
FSC PC-/DC- Rack cable management or S26361-F2735-L7 or
3rd party- Rack cable arm S26361-F2201-L20
For Base Units with hot plug PSU only (V201, V401, V601, V801)
S26113-F483-E11
2nd power supply module (PSU) Floorstand Versions
for redundancy A second, redundant power supply requires an additional power cord (section XIII)
occupies one bay for For later conversion of basic units with standard power supply
hot plug power supply to hot plug power supply, the following kit is available:
max. 1x per system 1.) hot plug PS upgrade kit, incl. 1 PS module + cable: S26113-F483-L6
Conversion standard into hot plug PS
2.) Supplementary power supply module S26113-F483-L11
for redundancy or repair
C
Fujitsu Technology Solutions x86 PRIMERGY Server 10 of 19
System configurator and order-information guide
C PRIMERGY TX150 S6 Status 2010-04-30
Section II Processor
One of following CPU´s has to be selected
for an orderable basic unit
Dual-Core CPU`s
- 1x 64-bit Intel
Pentium Dual Core E5xxx & E6xxx (2MB SLC) or
Core2 Duo E7x00 (3MB SLC) or
Xeon E31xx (6MB SLC)
with 1066 or 1333MHz Frontside Bus and heat pipe
occupies socket for one CPU
Pentium Dual Core E5200 (2.50GHz/2M/800) / 65W S26361-F3239-E520
Pentium Dual Core E6300 (2.80GHz/2M/1066) / 65W S26361-F3239-E630
Core2 Duo E7400 (2.80GHz/3M/1066) / 65W S26361-F3239-E740
Core2 Duo E7600 (3.06GHz/3M/1066) / 65W S26361-F3239-E760
Xeon UP E3110 (3.00GHz/6M/1333) / 65W S26361-F3239-E311
Xeon UP E3120 (3.16GHz/6M/1333) / 65W S26361-F3239-E312
Low Voltage Dual-Core CPU`s
- 1x 64-bit Intel
Xeon LV UP (6MB SLC)
with 1066 or 1333MHz Frontside Bus and heat pipe
occupies socket for one CPU
Xeon LV UP L3110 (3.00GHz/6M/1333) / 45W S26361-F3239-E110
Quad-Core CPU`s
- 1x 64-bit Intel Xeon UP (8/12MB SLC)
with 1066 or 1333MHz Frontside Bus and heat pipe
occupies socket for one CPU
Xeon UP X3220 (2.40GHz/8M/1066) / 95W S26361-F3239-E322
Xeon UP X3360 (2.83GHz/12M/1333) / 95W S26361-F3239-E336
Xeon UP X3370 (3.00GHz/12M/1333) / 95W S26361-F3239-E337
Section III Memory
There are 2 memory banks with 2 DIMM slots each.
Single channel memory configuration allow maximum flexibility:
Additional memory can be configured as single memory modules.
Dual channel memory configurations for maximum performance:
For optimum performance memory has to be configured in pairs of memory modules with identical size.
- For each basic unit slot 1 has to be equipped with one memory module,
(either 512MB, 1GB, 2GB)
Minimum one Memory ( one module ) = first Memory has to be selected for an orderable basic unit
S26361-F3870-E513 S26361-F3870-E514 S26361-F3870-E515
Main memory 512MB Main memory 1GB Main memory 2GB
4x DDR2 800/PC2-6400 ub ECC DDR2 800/PC2-6400 ub ECC DDR2 800/PC2-6400 ub ECC
consisting of one module consisting of one module consisting of one module
occupies one slot occupies one slot occupies one slot
max. 4x per system max. 4x per system max. 4x per system
Section IV Graphics
Graphics controller integrated in iRMC2 (integrated Remote Management Controller)
( max. Resolution: 1600 x 1200 at 16bpp )
S26361-F2748-E533
PY VGA Card 256MB PCI-e x1
NVIDIA Quadro NVS 290
256 MB PCIe-x1 The hight end optional NVIDIA NVS290 graphic card offers dual head operation
2x DVI or 2x VGA or and fully 3D video support.
1x DVI plus 1x VGA The cables for either two times DVI or VGA connections are part of the delievery.
cables adapters included Remote Video direction via iRMC must be disabled.
Dual head + fully 3-D This PCIe-x1 card can also be installed in any PCIe-x4, x8 or x16 slot.
supported for Windows OS Only one card per server is allowed.
not supported for Linux OS (native)
full height bracket
max. 1x per system
D
Fujitsu Technology Solutions x86 PRIMERGY Server 11 of 19
System configurator and order-information guide
D PRIMERGY TX150 S6 Status 2010-04-30
Section V Accessible drives
There are 3 bays (1.6" x 5.25") for accessible drives and 1 bay for FDD.
For LFF SAS base units an HDD extension box can be configured
( occupies 2x 5,25" ) providing 2x LFF (3.5") bays for hot plug HDDs.
S26361-F2826-E102 S26361-F2826-E203
F-D-L-HDD-Box 2 mounting Kit sl DVD and CSS F-D-L-HDD-Box 2Occupies two 5.25" x 1.6" bays Occupies one 5.25" x 1.6" bays to be used in SAS LFF
in the accessible bay area in the accessible bay area (3.5") Base Unit only
Offers bays for: Offers bays for:
- 1x CSS option - 1x CSS option
- 1x 0.5 * 5.25" SATA DVD-ROM - 1x 0.5 * 5.25" SATA DVD-ROM see Conf. diagram Option C - 2x 1 * 3.5" SAS HD`s max. 1x per system
One 0.5 * 3.5" anthracite bezel
for CSS bay S26361-F2557-E201
One 0.5 * 5.25" anthracite bezel Local Service Panel incl. adapter
for 0.5 * 5.25" DVD bay Customer Self Service see Conf. diagram
Two 1 * 3,25" anthracite bezels CSS module incl. adapter Option A
for SAS HDD bays 0.5" x 5.25"
max. 1 per system max. 1x per System
S26361-F2557-E204
Local Service Panel incl. mount. kit
Customer Self Service
CSS module incl. mounting kit
0.5" x 5.25"
max. 1x per system
S26361-F3269-E1 S26361-F3531-E1
DVD-RW 8x super multi drive Blu-ray Combo slim SATA
all formats, DUAL/DL, DVD-RAM 6x BD-ROM, 16x DVD, 40x CD
SATA BD DL and all CD/DVD formats
0.5 x 5.25", anthracite bezel
0.5 x 5.25", anthracite bezel max. 1x per system
max. 1x per system
S26361-F3266-E1 S26361-F3267-E1 S26361-F3530-E1
DVD-ROM 16/48x DVD-RW 16x super multi drive Blu-ray Combo HH SATA
all formats, DUAL/DL, DVD-RAM 6x BD-ROM, 16x DVD, 40x CD
SATA SATA BD DL and all CD/DVD formats
incl. description (Ger/US) 1.6 x 5.25", anthracite bezel
1.6 x 5.25", anthracite bezel 1.6 x 5.25", anthracite bezel max. 1x per system
max. 1x per system max. 1x per system
If installation is done locally, make sure you have internal
S26361-F2575-E1 or external FDD available for driver installation.
Floppy disk drive 1" Following USB Components are available
Connector: 26pin 1) USB DVD SM / Blu-Ray
incl. description (Ger/US) External SuperMulti Drive (as soon as released) S26341-F103-L82
1" * 3.5", anthracite bezel External Blu-Ray Drive (as soon as released) S26341-F103-L83
max. 1x per system 2) USB Keyboard: KBPC PX D, professional keyboard S26381-K340-V120
3) USB Mouse: Optical Wheel Mouse Tilt USB/PS2 S26381-K415-L100
4) USB Memorybird:
Memorybird P 4GB, SLC flash S26391-F6047-L104
MyUSBS A910 8GB, MLC Flash S26391-F6048-L208
E
Fujitsu Technology Solutions x86 PRIMERGY Server 12 of 19
System configurator and order-information guide
E PRIMERGY TX150 S6 Status 2010-04-30internal backup devices
S26361-F3270-E1 S26361-F3257-E4
SCSI U320 Controller 4 port SAS RAID Controller
Adaptec SCSI Card ASC-29320LPE (Colonial) LSI
1 channel: LVD MegaRAID SAS 1064
LVD connect. for HD, without cable For internal SAS Backup drives no Cache, no BBU
PCIe an additional 4-port SAS controller RAID 0, 1 & 1E
max. 1x per system has to be configured SAS 3Gb/sec
4 internal ports
S26361-F2814-E6 PCIe x4, 160mm
68-Pin Kit for accessible drives max. 1x per system
Cable with Terminator
To connect acc. drives to
separate SCSI controller
max. 1x per system
S26361-F3964-E3 S26361-F3459-E3 S26361-F3963-E3
Tape drive LTO2HH Ultrium SCSI Tape drive LTO3HH Ultrium SCSI Tape drive LTO4HH Ultrium SAS
200GB, 24MB/s, U160 SCSI 400GB, 60MB/s, U320 SCSI 800GB, 120MB/s, SAS 3Gb
Connector: HD68 Connector: HD68 Connector: SATA
without cable without cable incl. SAS cable
incl. description (Ger/US) incl. description (Ger/US) incl. description (Ger/US)
data and cleaning cartridge data and cleaning cartridge data and cleaning cartridge
1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel
max. 1x per system max. 1x per system max. 1x per system
S26361-F2848-E3 S26361-F3225-E3
Tape drive DDS Gen5 SCSI Tape drive DDS Gen6 SCSI
S26361-F2848-E31 (only for OBDR) 80GB, 6MB/s, U160 SCSI
DDS-G5 for One buttom dis. recov. Connector: HD68
36GB, 3MB/s, U2W SCSI without cable
Connector: HD68 incl. description (Ger/US)
2x without cable data and cleaning cartridge
incl. description (Ger/US) 1.6 * 5.25", anthracite bezel
data and cleaning cartridge max. 1x per system
1.6 * 5.25", anthracite bezel
max. 1x per system
S26361-F3325-E3 S26361-F3324-E3 S26361-F3857-E1
Tape drive DDS Gen6 USB 5.25" Tape drive DDS Gen5 USB 5.25" RDX drive USB 5.25" internal
80GB, 6MB/s, USB 2.0 36GB, 3MB/s, USB 2.0 80-320GB, 25MB/s, USB 2.0
Connector: USB "B" Connector: USB "B" Connector: USB "B" For later installationincl. description (Ger/US) incl. description (Ger/US) incl. description (Ger/US) of DDS Drives use
data and cleaning cartridge data and cleaning cartridge without RDX cartridges S26361-F3324-L4
1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel
max. 1x per system max. 1x per system max. 1x per system
SCSI Controller for external backup drives (PRIMERGY SX10)
RDX cartridges must be ordered separately
S26361-F3270-E1 RDX 80GB = S26361-F3857-L80
SCSI U320 Controller RDX 160GB = S26361-F3857-L160
Adaptec SCSI Card ASC-29320LPE (Colonial) RDX 320GB = S26361-F3857-L320
1 channel: LVD
LVD connect. for HD, without cable
PCIe
max. 1x per system
SAS Controller for external backup drives (FiberCat TXF)
as soon as available
S26361-F3271-E1
8port SAS
LSI3442E
4port intern, 4port extern
PCIe
max. 1x per system
F
Fujitsu Technology Solutions x86 PRIMERGY Server 13 of 19
System configurator and order-information guide
F PRIMERGY TX150 S6 Status 2010-04-30
Section VI Hard disks drives
SAS/SATA LFF (3.5") Base Units: SAS HDD Require SAS Controller! see section VIII internal Disk Array
There is a 6 port SATA controller in the Base Unit.
Up to 4 SATA LFF (3.5") hard disks can be configured.
Mixed Configurations are not supported in SATA base units.
If you need SAS, you can choose between two types of 8 port SAS controller to enable the Base Unit.
Up to 4 SAS or SATA LFF (3.5") hard disks can be configured.
If LFF SAS HDD Extension Box, Option C is used up to 6 SAS LFF (3.5") hard disks can be configured.
Mixed Configurations of SAS and SATA HDDs connected to the same Backplane are not supported.
If you need to run Mixed Configurations:
- order the SATA drives needed as L-Number
- make shure SAS and SATA drives are not used on the same Backplane
Hot replace is only possible running RAID.
S26361-F3204-E573 S26361-F3204-E514 S26361-F3204-E530 S26361-F3204-E545
HD 73GB 15krpm 3.5" HD 146GB 15krpm 3.5" HD 300GB 15krpm 3.5" HD 450GB 15krpm 3.5"
15.000rpm,<4ms, 8MB Cache 15.000rpm,<4ms, 8MB Cache 15.000rpm,<4ms, 8MB Cache 15.000rpm,<4ms, 8MB Cache
SAS 3Gb/s SAS 3Gb/s SAS 3Gb/s SAS 3Gb/s
hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray
max. 4/6x per system max. 4/6x per system max. 4/6x per system max. 4/6x per system
4/6x
S26361-F3204-E560
HD 600GB 15krpm 3.5"
15.000rpm,<4ms, 8MB Cache
SAS 3Gb/s
hot plug/hot replace tray
max. 4/6x per system
S26361-F3218-E160
HD 160GB 7.2krpm 3.5"
7200rpm,<9.0 ms, 8MB Cache
SATA 3Gb/s
hot plug/hot replace tray
max. 2x per system
4x
S26361-F3265-E250 S26361-F3265-E500 S26361-F3265-E750 S26361-F3265-E100
HD 250GB 7.2krpm 3.5" HD 500GB 7.2krpm 3.5" HD 750GB 7.2krpm 3.5" HD 1TB 7.2krpm 3.5"
7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache
SATA 3Gb/s SATA 3Gb/s SATA 3Gb/s SATA 3Gb/s
hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray
max. 2x per system max. 2x per system max. 2x per system max. 2x per system
SAS SFF (2.5") Base Units: Requires SAS Controller! see section VIII internal Disk Array
you can choose between two type of 8 port SAS controller for the Base Unit.
Up to 8 SAS SFF (2.5") hard disks can be configured as standard.
Hot replace is only possible running RAID.
S26361-F3208-E173 S26361-F3208-E114
HD 73GB 10krpm 2.5" HD 146GB 10krpm 2.5"
8x 10000rpm,<4,5ms, 8MB Cache 10000rpm,<4,5ms, 8MB Cache
SAS 3Gb/s SAS 3Gb/s
hot plug/hot replace tray hot plug/hot replace tray
max. 8x per base unit max. 8x per base unit
G
Fujitsu Technology Solutions x86 PRIMERGY Server 14 of 19
System configurator and order-information guide
G PRIMERGY TX150 S6 Status 2010-04-30
Section VII External SAS Disk Array
S26361-F3890-E1 S26361-F3890-E10
8 port SAS RAID Controller 8 port SAS RAID Controller
LSI LSI
MegaRAID SAS8880E MegaRAID SAS8880E
512MB Cache with ECC 512MB Cache with ECC
RAID 0, 1, 10, 5, 50, 6 & 60 RAID 0, 1, 10, 5, 50, 6 & 60
without iBBU with iBBU
SAS 3Gb/sec SAS 3Gb/sec
8 port external 8 port external
PCIe x4, 167mm PCIe x4, 167mm
low profile bracket low profile bracket
max. 1x per system max. 1x per system
Section VIII internal Disk Array
SATA Configuration
SATA Base Units contain a 6-port on-board SATA controller supporting RAID Levels 0, 1
RAID 5 requires a FW-Extension option (iButton)
S26361-F3217-E100
SATA Software RAID5 LSI
LSI MegaSR
enabling key
SATA 3Gb/sec
internal SATA port only
uses SATA ports of Southbridge
max. 1x per system
SAS Configuration
you can choose between two types of 8 port SAS controller for the Base Unit:
- LSI 1068e based Modular RAID 0,1 (IME)
- LSI 1078 based Modular RAID 5,6
if you want to use SAS harddisks one Controller is required
Controller for 1 to 8 LFF (3.5") or SFF (2.5") HDD
S26361-F3257-E8 S26361-F3257-E256 S26361-F3257-E512
8 port SAS RAID Controller 8 port SAS RAID Controller 8 port SAS RAID Controller
LSI LSI LSI
MegaRAID SAS 1068 MegaRAID SAS 1078 MegaRAID SAS 1078
RAID 0, 1 & 1E 256MB Cache with ECC 512MB Cache with ECC
no controller cache optional BBU optional BBU
SAS 3Gb/sec SAS 3Gb/sec SAS 3Gb/sec
8 internal ports 8 internal ports 8 internal ports
PCIe x4, 160mm PCIe x4, 160mm PCIe x4, 160mm
with combi bracket with combi bracket with combi bracket
max. 1x per system max. 1x per system max. 1x per system
S26361-F3257-E55
Cache Battery Backup Unit L-Order-Number is:max. 1x per Controller S26361-F3257-L10
H
Fujitsu Technology Solutions x86 PRIMERGY Server 15 of 19
System configurator and order-information guide
H PRIMERGY TX150 S6 Status 2010-04-30
Section IX Communication / Network
1x on-board LAN Controller
Fast Ethernet Controller on-board Teaming: Failover, Load Balancing
1GBit Bcom 5755 If used with additional server adapter, the
with TPM 1.2 onboard LAN controller can operate in Teaming Mode.
ext: for RJ 45 connector
SW: VLAN
A) PCI Adapters with Teaming capability 10-1000TX /SX
S26361-F3142-E2 Teaming: Failover, Load Balancing
Gigabit Ethernet Controller 1000TX If used with additional server adapter, the
2x Eth Ctrl 1x1Gbit PCI32 PRO/1000GT Cu Intel Pro/1000 GT Desktop Adapter can operate in Teaming Mode.
Intel Pro/1000 GT Desktop Adapter
PCI 32 (33/66MHz),
ext: for RJ45-connector, Cat 5
max. 2x per system
B) Dual Port PCI-Express Adapter 1000TX
S26361-F3228-E1
Gigabit Ethernet Controller Dual 1000TX
Eth. Ctrl 2x1Gbit PCIe PRO/1000PT Cu
Intel Pro/1000PT dual Port Server Adapter
PCIe x4
ext: for RJ45-plug, Cat 5
max. 2x per system
C) PCI-Express Adapter 1000TX/SX
S26361-F3241-E1 S26361-F3242-E1 S26361-F3516-E1
Gigabit Ethernet Contr. 1000TX Gigabit Ethernet Contr. 1000SX Gigabit Ethernet Controller 1000TX
Eth Ctrl 1x1Gbit PCI-e Pro/1000PT Cu Eth Ctrl 1x1Gbit PCI-e Pro/1000PF LC Eth Ctrl 1x1Gbit PCI-e Gigabit CT DT Cu
3x Intel PRO/1000 PT Server Adapter Intel PRO/1000 PF Server Adapter Intel® Gigabit CT Desktop Adapter
PCIe x1 PCIe x4 PCIe x1
ext: for RJ45-connector, Cat 5 ext:LC-connector ext: for RJ45-connector, Cat 5
max. 2x per system max. 2x per system max. 2x per system
D) Quad Port PCIe Adapter 1000TX
S26361-F3462-E1
Gigabit Ethernet Controller Quad 1000TX
Eth Ctrl 4x1Gbit PCI-X PRO/1000PT Cu
Intel PRO/1000 PT Quad Port Low Profile Server Adapter
PCIe x4
ext: for RJ45-plug, Cat 5
max. 2x per system
I
Fujitsu Technology Solutions x86 PRIMERGY Server 16 of 19
System configurator and order-information guide
I PRIMERGY TX150 S6 Status 2010-04-30
Section X System management options
S26361-F1790-E241
iRMC2 advanced pack
integrated remote management controller
activation key for
graphical console redirection
and remote media redirection
max. 1x per system
Section XI Miscellaneous
S26361-F2571-E8
External on-board parallel port Interface
Cable and external
connector interface (25 pins)
fits I/O shield cutoff
max. 1x per system for ext.
S26361-F2571-E10
External on-board serial port Interface
Cable and external
connector interface (9 pins) housing offers addional cutoff - no PCI slot occupied
fit´s PCI cutoff (see Info-Box)
max. 1x per system for ext.
J
Fujitsu Technology Solutions x86 PRIMERGY Server 17 of 19
System configurator and order-information guide
J PRIMERGY TX150 S6 Status 2010-04-30
Section XII Country specific power cords
A country specific power cord has to be ordered for all floorstand versions:
- once per basic unit and an additional second cable
- if an second hot plug, redundant power supply modul is ordered.
PRIMERGY TX150 S6 Floorstand PRIMERGY TX150 S6 Rack
Power cord for following countries:
1,8 m, grey Country specific power cords are not
required for rack versions, except for USA
T26139-Y1740-E10 D, A, B, F, NL, FIN, S, N, E, P, RUS, TR &Canada. Power cords are shipped in a rack
max. T26139-Y1742-E10 USA, Canada version with inlet connector for non-heating
2 x T26139-Y1743-E10 Switzerland apparatus. (1x with Standard PSU,
T26139-Y1744-E10 UK, Ireland 2x with hot plug upgrade)
T26139-Y1745-E10 Italy
T26139-Y1746-E10 Denmark T26139-Y1742-E10 USA, Canada
T26139-Y3850-E10 Option "no powercord", for Countries without For shipments to USA&Canada, you have to order
specific cable orderable like e.g. China one power cord (1,8m, grey) per power supply.
Attention: For connection of a monitor
to the system an additional country
specific power cord has to be
ordered as option.
Power cord for optional monitor connection for the following countries:
1.8m, grey
T26139-Y1740-L10 D, A, B, F, NL, FIN, N, S, E, P, RUS, TR
T26139-Y1742-L10 USA, Canada
T26139-Y1743-L10 Switzerland
T26139-Y1744-L10 UK, IR
T26139-Y1745-L10 Italy
T26139-Y1746-L10 Denmark
Options and other peripherals
For other options, refer to SystemArchitect and Pricelist.
These options are supplied lose with the shipment.
For suitable peripherals for this product, please refer to SystemArcitect.
Option for Floorstand
keyboards for floorstand versions for following countries: USB Keyboard: S26381-K340-E120
S26381-K397-E110 USA / international KBPC PX D, professional keyboard
S26381-K397-E120 Germany
S26381-K397-E140 France
S26381-K397-E155 Sweden / Finland
S26381-K397-E165 United Kingdom
S26381-K397-E180 Spain
S26381-K397-E185 Italy
End PRIMERGY TX150 S6
Fujitsu Technology Solutions x86 PRIMERGY Server 18 of 19
System configurator and order-information guidePRIMERGY TX150 S6 Status 2010-04-30
Change Report
Date Order number Changes
2009-07-31 S26361-F3239-E760 Core2 Duo E7600 - now available
2009-07-31 S26361-F3239-E630 Core2 Duo E6300 - now available
2009-06-17 S26361-F2748-E533 new graphics card released
2009-06-16 S26361-F3460-E3 Tape drive LTO1HH Ultrium - no longer available
2009-03-31 S26361-F3268-E1 CD-RW / DVD ROM drive - no longer available
2009-02-23 S26361-F3864-E1 no longer available
2009-01-27 S26361-f3239-E337 Xeon UP X3370 (3.00GHz/12M/1333) / 95W now available
2009-01-27 S26361-F3239-E110 Xeon LV UP E3110 (3.00GHz/6M/1333) / 45W now available
2008-12-17 S26361-F1790-E221 RemoteView Software V5.0 - no longer available
2008-12-05 S26361-F3239-E440 Celeron 440 2.0GHz 512kB 800MHz FSB - no longer available
2008-10-28 S26361-F3239-E335 Xeon UP X3350 (2.66GHz/12M/1333) / 95W - no longer available
2008-10-28 S26361-F3239-E306 Xeon UP 3065 (2.33GHz/4M/1333) / 65W - no longer available
2008-10-28 S26361-F3239-E216 Pentium Dual Core E2160 (1.8GHz/1M/800) / 65W - no longer available
2008-10-28 S26361-F3257-E4 4 port SAS RAID Controller - as soon as available
2008-10-28 S26361-F3963-E3 Tape drive LTO4HH Ultrium - as soon as available
2008-10-28 S26361-F3225-E3 Tape drive DDS Gen6 - as soon as available
2008-10-28 S26361-F3964-E3 Tape drive LTO2HH Ultrium LC - as soon as available
2008-10-28 S26361-F3157-E3 Tape Kit LTO2HH Ultrium 200GB no longer available
2009-10-25 S26361-F3516-E1 Gigabit Ethernet Controller 1000TX - now available
2008-09-26 S26361-F3239-E460 Core2 Duo E4600 (2.4GHz/2M/800) / 65W no longer available
2008-09-30 S26361-F3239-E312 New Xeon UP E3120 CPU - now available
2008-09-30 S26361-F3265-E100 HD SATA 3Gb/s 1TB 7.2k hot plug 3.5" - as soon as available
2008-09-01 S26361-F3531-E1 Blu-ray Combo drive HH SATA Low Profile now available
2008-09-01 S26361-F3530-E1 Blu-ray Combo drive HH SATA now available
2008-09-01 S26361-F3239-E220 Pentium Dual Core E2200 (2.2GHz/1M/800) / 65W now available
2008-09-01 S26361-F3239-E336 Pentium Quad Core Xeon UP X3360 (2.83GHz/12M/1333) / 95W now available
2008-07-14 S26361-F3204-E545 HD 450GB 15krpm 3.5" - as soon as available
2008-07-08 S26361-F3239-E720 Core2 Duo E7200 (2.53GHz/3M/1066) / 65W now available
2008-07-08 S26361-F3890-E10 new 8 port SAS RAID Controller with iBBU - as soon as available
2008-07-08 S26361-F3890-E1 new 8 port SAS RAID Controller without iBBU - as soon as available
2008-06-25 S26361-F3204-E130 HD SAS 3Gb/s 300GB 10k hot plug 3.5" no longer available
2008-05-29 S26361-F3239-E450 Core2 Duo E4500 (2.2GHz/2M/800) / 65W no longer available
2008-04-30 S26361-F3239-E214 Pentium DC E2140 no longer available
2008-03-17 S26361-F3239-E460 Core2 Duo E4500 (2.4GHz/2M/800) / 65W now available
2008-03-17 S26361-F3239-E216 Pentium Dual Core E2140 (1.8GHz/1M/800) / 65W now available
2008-03-11 S26361-F3204-E114 no longer available
2008-03-11 S26361-F3204-E173 no longer available
2008-02-19 S26361-F3239-E335 New CPU
2007-12-20 S26361-F3436-E4 No TPM - now available
2007-11-22 first draft
Fujitsu Technology Solutions x86 PRIMERGY Server 19 of 19