primergy tx150 s6 · 2019. 1. 10. · system configurator and order-information guide primergy...

PRIMERGY TX150 S6System configurator and order-information guide

Contents

Instructions

Configuration diagram

ConfiguratorSoftware Configurator IA32 and EM64T

I Basic unit

II Processor

III Memory

IV Graphics

V Accessible drives

VI Hard disk drives

VII SAS / SCSI Controller

VIII Disk array

IX Communication/Network

X System management options

XI Miscellaneous

XII Country specific power cords

Change report

PRIMERGY Server

May 2010

System configurator and order-information guide

PRIMERGY TX150 S6 Status 2010-04-30

Instructions

This document contains basic product and configuration information that will enable you to configure your system via

PC-/ System-Architect.

Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete

PRIMERGY Rack system.

You can configure your individual PRIMERGY server in order to adjust your specific requirements.

The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect

Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through

the configurator by following the lines from the top to the bottom.

Section III Memory, example

There are X memory slots which can be equipped with XXX MB.

It is permissible to make up to X passes through the memory upgrade options.

S26361-XXX-XXX S26361-XXX-XXX

Memory XXX MB Memory XXX MB

X times

max. X times per system max. X times per system

In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x

Please note that there are information symbols which indicate necessary information.

For further information see:

http://ts.fujitsu.com/products/standard_servers/index.html(internet)

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx (extranet)

Prices and availability see price list and PC-/ System-ArchitectSubject to change and errors excepted

Fujitsu Technology Solutions x86 PRIMERGY Server 2 of 19

System configurator and order-information guidePRIMERGY TX150 S6 Status 2010-04-30

Configuration diagram PRIMERGY TX150 S6 SATA LFF (3.5") System Unit

System unit ( I )

SIDE VIEW FRONT VIEW

3 x HH 5.25" + FDD free or 2 x HH 5,25" + FDD free + Option A

or PS (I) 5.25" Slim Line

1. PSU 2. PSU CSS Option Redundant power supply option

5.25" x 1.6"

Modul 1

Xeon UP 5.25" x 1.6"

Modul 3

Modul 2

Accessible drives ( V )

Modul 4

Processor ( II ) optional CSS: (Option A)

Memory ( III ) - support for SL (0.5") DVD Drive + local View LED Display (CSS)

- occupies one 5.25" bay

Extension slots one DVD (slim line or standard) is mandatory

SCSI Controller ( VII )

Disk Array ( VIII )Communication/Network ( IX ) Hard disk drives ( VI )Miscellaneous ( X )

Slot 6 ( 3,3V ): PCIe x8, short



Slot 3 ( 5V ): PCI 32-Bit / 33MHz, short

Slot 2 ( 5V ): PCI 32-Bit / 33MHz, long


Key:

Included in basic unit

Option

4x 3

,5"

HD

D F

ram

e

2.)

1.)

1.)

Bank 2

3.)

1.)

Syste

m F

an

4.)

4 P

CI-

Bu

sses

Standard Power Supply

Bank 1

3.5"x1" SATA

3.5"x1" SATA

3.5"x1" SATA

3.5"x1" FD Drive

3.5"x1" SATA



Configuration diagram PRIMERGY TX150 S6 SAS LFF (3.5") System Unit

System unit ( I )


3 x HH 5.25" + FDD free or 2 x HH 5,25" + FDD free + Option A or

1 x HH 5.25" + FDD free + Option Cor PS (I)

5.25" Slim Line

1. PSU 2. PSU CSS Option 5.25" Slim Line Redundant power supply option

5.25" x 1.6"

Modul 1

Xeon UP 5.25" x 1.6" 5.25" x 1.6"

Modul 3

Modul 2

Accessible drives ( V )optional CSS: (Option A)

Modul 4 - support for SL (0.5") DVD Drive + local View LED Display (CSS)

Processor ( II ) - occupies one 5.25" bay

Memory ( III ) optional SAS LFF HDD extension Box: (Option C)

- support for

+ 2x 3.5" SAS HDD hot plug

Extension slots + SL (0.5") DVD Drive

+ CSS Option

SCSI Controller ( VII ) - occupies two 5.25" bays

Disk Array ( VIII )Communication/Network ( IX )Miscellaneous ( X ) one DVD (slim line or standard) is mandatory

Hard disk drives ( VI )







Key:


Option

3.)

2.)

1.)

4 P

CI-

Bu

sses

1.)

1.)

4.)

Syste

m F

an

3.5"x1" FD Drive

Bank 1

Bank 2


3.5"x1" SAS

3.5"x1" SAS

3.5"x1" SAS

3.5"x1" SAS

3.5"x1" SAS

3.5"x1" SAS

4x 3

,5"

HD

D F

ram

e

CSS Option



Configuration diagram PRIMERGY TX150 S6 SAS SFF (2.5") System Unit

System unit ( I )


3 x HH 5.25" + FDD free or 2 x HH 5,25" + FDD free + Option A

or PS (I) 5.25" Slim Line

1. PSU 2. PSU CSS Option Redundant power supply option

5.25" x 1.6"

Modul 1

Xeon UP 5.25" x 1.6"

Modul 3

Modul 2

Accessible drives ( V )

Modul 4 optional CSS: (Option A)

Processor ( II ) - support for SL (0.5") DVD Drive + local View LED Display (CSS)

Memory ( III ) - occupies one 5.25" bay

Extension slots one DVD (slim line or standard) is mandatory

SCSI Controller ( VII )

Disk Array ( VIII )Communication/Network ( IX ) Hard disk drives ( VI )Miscellaneous ( X )







Key:


Option

2.)


Bank 1

Bank 2

4 P

CI-

Bu

sses

3.)

1.)

1.)

4.)

Syste

m F

an

3.5"x1" FD Drive

1.)

8x SFF HDD Frame

2.5" (SFF) SAS

2.5" (SFF) SAS

2.5" (SFF) SAS

2.5" (SFF) SAS

2.5" (SFF) SAS

2.5" (SFF) SAS

2.5" (SFF) SAS

2.5" (SFF) SAS


System configurator and order-information guideStart PRIMERGY TX150 S6 PRIMERGY TX150 S6 Status 2010-04-30

SW Configurator IA32

with OEM-Software without OEM-Software

for PRIMERGY Server for PRIMERGY Server

OEM-SW is bound to HW and

is not allowed to be ordered

separately.

For all SW products please refer to the corresponding software configurator accessible via

the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.

Microsoft - Software: **) PRIMECLUSTER *)

- Small Business Server 2003 - Clustering

- Windows Server 2003 R2, - Load Balancing

Standard Edition

Enterprise Edition

! Web Edition, SP2/English

- Additional loose Linux - Software: **)

Client-Access-Licenses (CALs) - Open Enterprise Server ***)

(not for Web Edition) - SuSE Linux ES (OEM): LO

- SuSE Linux ES (Support): LS

- Red Hat EL (OEM): LO

- Red Hat EL (Support): LS

Manageability Software: V**) Details eg. version numbers are published

- iRMC2 advanced Pack in the separate SW-Configurator

- RemoteDeploy

Backup-Software /

Application-Software: U

- ARCserve

***) Supply over distribution or procurement from FSC VP BC Software

They find single software configurators and release lists (OS-matrix / system management / security) under following addresses:

for internal users:for partners:

Continue with PRIMERGY

HW configurator


System configurator and order-information guideStart PRIMERGY TX150 S6 PRIMERGY TX150 S6 Status 2010-04-30

SW Configurator EM64T

with OEM-Software without OEM-Software

for PRIMERGY Server for PRIMERGY Server

OEM-SW is bound to HW and

is not allowed to be ordered

separately.

For all SW products please refer to the corresponding software configurator accessible via

the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.

Microsoft - Software: W Linux - Software *) **)

only - Windows Server 2003 R2, only - SuSE Linux ES (OEM): LO

EM64T Standard x64 Edition x86_64 - SuSE Linux ES (Support): LS

Enterprise x64 Edition - Red Hat EL (OEM): LO

- Additional loose - Red Hat EL (Support): LS

Client-Access-Lizenzen (CALs)

Details eg. version numbers are published

Manageability Software: V**) in the separate SW-Configurator

- iRMC2 advanced Pack

- RemoteDeploy

***) Supply over distribution or procurement from FSC VP BC Software

You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:

for internal users:for partners:

Continue with PRIMERGY

HW configurator



Start PRIMERGY TX150 S6 PRIMERGY TX150 S6 Status 2010-04-30

Section I Basic unit

System unit, Rack and Floorstand, including:

* Lockable front door and sliding screen in floorstand version

sliding screen for accessible drive bays

Door for hot plug HDD bays

Both may be locked or sliding screen may be left open while door is still locked

* backplane with 4 bays for hot-plug HD's. Type depending on base unit:

Type 1: 4x hot plug LFF (3.5") SAS/SATA HDD (SAS/SATA LFF base units only)

Type 2: 8x hot plug SFF (2.5") SAS HDD (SAS SFF base units only)

* 1 power supply (Standard PS) or hot plug PSU

in addition there is an upgrade to hot plug redundant PSU available

* System fan ( No Hot-plug, No redundancy )

* 3 bays 5.25" for accessible drives (half Hight)

* 1 bay 3.5" for FDD

Systemboard with:

* One Xeon UP Dual- or Quad-Core CPU supporting 64Bit EM64T and Intel® VT / EIST / DBS Technology.

* Chipset Intel® 3210 (codenamed Bigby-P)

* 6 PCI slots: 2x PCIe x8, short (167mm max)

1x PCIe x4, short (167mm max)

3x 32Bit / PCI 33MHz, 2x long ( 5V )

* 4 memory slots for max. 8GB DDR2 / PC2-6400 RAM

2-way memory interleave technology => 2 banks with 2 slots each, max. 4GB modul per slot,

* SATA-Controller on board (supporting RAID 0/1; RAID 5 with iButton Option)

* 1 Gbit Ethernet LAN on board ( Bcom 5755 ) with TPM 1.2

and iSCSI boot integrated in System BIOS as selectable option

* iRMC S2 (integrated Remote Management Controller) on-board server management controller

with dedicated 10/100 Service LAN-port and

integrated graphics controller ( max. Resolution: 1600 x 1200 at 16 bpp)

Interfaces:

* 1x RS-232-C (9-pin) (usable for BMC or OS or shared)

* 1x RS-232-C (serial, 9pin), as option

* 1x Centronics (parallel, 25 pin, EPP/ECP compatible), as option

* 1x keyboard (PS/2)

* 1x mouse (PS/2)

* 1x VGA (15 pin)

* 8x USB 2.0 ( UHCI ) with 480MBit/s (4x external at the rear, 1x external at the frontside,

2x internal USB Interfaces for backup devices 1x internal Type A, no USB wakeup)

* 1x LAN RJ45, 1x Service-LAN RJ45

*internal Cables:

1. SATA cable for CD/DVD.

2. Cable for HDD Backplane

3. USB cable (for 1 internal Backup)

* PS/2 mouse (floorstand version only)

* ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates

* Documentation engl. (multilingual on CD)

A




A

Floorstand-version Rack-version (5U)

Basic unit without CPU and Memory Basic unit without CPU and Memory

Including 1 power cord with inlet connector

for non-heating apparatus

- One CPU ( first CPU ) has to be configured - One CPU ( first CPU ) has to be configured

additionally for a base configuration additionally for a base configuration

- One memory kit has to be configured - One memory kit has to be configured

for a base configuration for a base configuration

- Mouse with two pushbuttons

SAS/SATA LFF (3.5") Floorstand-version with: SAS/SATA LFF (3.5") Rack-version with:

- 4-port SAS backplane for 4 hot plug - 4-port SAS backplane for 4 hot plug

LFF (3.5") SAS/SATA HDDs incl. cables for connection LFF (3.5") SAS/SATA HDDs incl. cables for connection

to the onboard SATA or plug in SAS controller to the onboard SATA or plug in SAS controller

- SAS/SATA LFF (3.5") Base Unit - SAS/SATA LFF (3.5") Base Unit

standard PSU S26361-K1081-V101 standard PSU S26361-K1081-V501

hot plug PSU S26361-K1081-V201 hot plug PSU S26361-K1081-V601

SAS SFF (2.5") Floorstand-version with: SAS SFF (2.5") Rack-version with:

- 8-port SAS backplane for 8 hot - 8-port SAS backplane for 8 hot

plug SFF (2.5") SAS HDDs incl. cables for connection plug SFF (2.5") SAS HDDs incl. cables for connection

to the plug in SAS controller to the plug in SAS controller

- SAS SFF (2.5") Base Unit - SAS SFF (2.5") Base Unit

standard PSU S26361-K1081-V301 standard PSU S26361-K1081-V701

hot plug PSU S26361-K1081-V401 hot plug PSU S26361-K1081-V801

S26361-F3436-E4 S26361-F3436-E4

no TPM no TPM

Disable function for Trusted Platform Disable function for Trusted Platform

Use according to import restrictions Use according to import restrictions

max. 1x per system max. 1x per system

B1 B2

The LFF Base Units offer onboard SATA

functionality for up to 4 HDD.

An additional SAS controller is required

if you need support for SAS HDD.




B1 B2

S26361-F2735-E111 S26361-F2735-E105

No Rackmount-Kit option RMK-F1_TX150-S6

Only for loose deliveries telescopic rail, full extraction,

No mounting in Racks possible 1-hand-mounting

max. 1x per system consisting of

- 1 pair of telescopic rails

with easy-mounting-clips

- 1 bracket DC-PC-3rd-Rack

1x per system S26361-F2735-L105

RMK-F1_TX150-S6

for loose delivery

S26361-F2735-E7 S26361-F2201-E20

Cable management PC-Rack Cable arm 3rd P-Rack S26361-F2735-L7

- for FSC Primecenter / - for 3rd party Cable management PC-Rack

Datacenter Racks 1x per system for loose delivery

- not for 3rd party

1x per system S26361-F2201-L20

Cable arm 3rd party racks

for loose delivery

PRIMERGY PRIMECENTER-rack

SNP:SY-F1647E301-P

Installation ex works for one

server or subsystem.

Hereby the rack will be delivered PRIMERGY 42/23U rack

completely pre-mounted and PRIMERGY Classic 19" rack is not supported

all wired connections are tested.

With racks 12U, 24U, 38U: "Rack-mounting ex factory"

Systems and components This service is to be ordered once

will be delivered installed in the rack per installable server/storage

With racks 46U: subsystem, in order to get the

Systems and components server/storage subsystem

will be delivered separately mounted into the PRIMERGY racks.

To be ordered only together with In case of the 46 U PRIMERGY Rack,

a PRIMERGY PRIMECENTER rack this service has to be ordered,

e.g.: to get the mounting kits and the

S26361-K826-V10x cables installed.

refer configurator PC-Rack

max. 1x per System

For later conversion the following kits are available: FSC PC-/DC-/3rd party- Rack

1.) Conversion kit 2 Floor -> Rack S26361--F2618-L250

Conversion PRIMERGY TX150 S6 base unit floorstand into

base unit rack. Only conversion, no mounting kit. plus

Mounting kit has to be ordered seperatly

2.) Mounting Kit FSC PC-/DC-/3rd party- Rack S26361-F2735-L105

incl. DC- PC- bracket, no cable managment RMK-F1_TX150-S6

This kit will fit in server racks and

conforming to EIA standards EIA-310-D for 19" racks.

3.) cable management or cable arm

to be ordered additionally either one to be ordered

FSC PC-/DC- Rack cable management or S26361-F2735-L7 or

3rd party- Rack cable arm S26361-F2201-L20

For Base Units with hot plug PSU only (V201, V401, V601, V801)

S26113-F483-E11

2nd power supply module (PSU) Floorstand Versions

for redundancy A second, redundant power supply requires an additional power cord (section XIII)

occupies one bay for For later conversion of basic units with standard power supply

hot plug power supply to hot plug power supply, the following kit is available:

max. 1x per system 1.) hot plug PS upgrade kit, incl. 1 PS module + cable: S26113-F483-L6

Conversion standard into hot plug PS

2.) Supplementary power supply module S26113-F483-L11

for redundancy or repair

C



C PRIMERGY TX150 S6 Status 2010-04-30

Section II Processor

One of following CPU´s has to be selected

for an orderable basic unit

Dual-Core CPU`s

- 1x 64-bit Intel

Pentium Dual Core E5xxx & E6xxx (2MB SLC) or

Core2 Duo E7x00 (3MB SLC) or

Xeon E31xx (6MB SLC)

with 1066 or 1333MHz Frontside Bus and heat pipe

occupies socket for one CPU

Pentium Dual Core E5200 (2.50GHz/2M/800) / 65W S26361-F3239-E520

Pentium Dual Core E6300 (2.80GHz/2M/1066) / 65W S26361-F3239-E630

Core2 Duo E7400 (2.80GHz/3M/1066) / 65W S26361-F3239-E740

Core2 Duo E7600 (3.06GHz/3M/1066) / 65W S26361-F3239-E760

Xeon UP E3110 (3.00GHz/6M/1333) / 65W S26361-F3239-E311

Xeon UP E3120 (3.16GHz/6M/1333) / 65W S26361-F3239-E312

Low Voltage Dual-Core CPU`s

- 1x 64-bit Intel

Xeon LV UP (6MB SLC)



Xeon LV UP L3110 (3.00GHz/6M/1333) / 45W S26361-F3239-E110

Quad-Core CPU`s

- 1x 64-bit Intel Xeon UP (8/12MB SLC)



Xeon UP X3220 (2.40GHz/8M/1066) / 95W S26361-F3239-E322



Section III Memory

There are 2 memory banks with 2 DIMM slots each.

Single channel memory configuration allow maximum flexibility:

Additional memory can be configured as single memory modules.

Dual channel memory configurations for maximum performance:

For optimum performance memory has to be configured in pairs of memory modules with identical size.

- For each basic unit slot 1 has to be equipped with one memory module,

(either 512MB, 1GB, 2GB)

Minimum one Memory ( one module ) = first Memory has to be selected for an orderable basic unit

S26361-F3870-E513 S26361-F3870-E514 S26361-F3870-E515

Main memory 512MB Main memory 1GB Main memory 2GB

4x DDR2 800/PC2-6400 ub ECC DDR2 800/PC2-6400 ub ECC DDR2 800/PC2-6400 ub ECC

consisting of one module consisting of one module consisting of one module

occupies one slot occupies one slot occupies one slot

max. 4x per system max. 4x per system max. 4x per system

Section IV Graphics

Graphics controller integrated in iRMC2 (integrated Remote Management Controller)

( max. Resolution: 1600 x 1200 at 16bpp )

S26361-F2748-E533

PY VGA Card 256MB PCI-e x1

NVIDIA Quadro NVS 290

256 MB PCIe-x1 The hight end optional NVIDIA NVS290 graphic card offers dual head operation

2x DVI or 2x VGA or and fully 3D video support.

1x DVI plus 1x VGA The cables for either two times DVI or VGA connections are part of the delievery.

cables adapters included Remote Video direction via iRMC must be disabled.

Dual head + fully 3-D This PCIe-x1 card can also be installed in any PCIe-x4, x8 or x16 slot.

supported for Windows OS Only one card per server is allowed.

not supported for Linux OS (native)

full height bracket

max. 1x per system

D



D PRIMERGY TX150 S6 Status 2010-04-30

Section V Accessible drives

There are 3 bays (1.6" x 5.25") for accessible drives and 1 bay for FDD.

For LFF SAS base units an HDD extension box can be configured

( occupies 2x 5,25" ) providing 2x LFF (3.5") bays for hot plug HDDs.

S26361-F2826-E102 S26361-F2826-E203

F-D-L-HDD-Box 2 mounting Kit sl DVD and CSS F-D-L-HDD-Box 2Occupies two 5.25" x 1.6" bays Occupies one 5.25" x 1.6" bays to be used in SAS LFF

in the accessible bay area in the accessible bay area (3.5") Base Unit only

Offers bays for: Offers bays for:

- 1x CSS option - 1x CSS option

- 1x 0.5 * 5.25" SATA DVD-ROM - 1x 0.5 * 5.25" SATA DVD-ROM see Conf. diagram Option C - 2x 1 * 3.5" SAS HD`s max. 1x per system

One 0.5 * 3.5" anthracite bezel

for CSS bay S26361-F2557-E201

One 0.5 * 5.25" anthracite bezel Local Service Panel incl. adapter

for 0.5 * 5.25" DVD bay Customer Self Service see Conf. diagram

Two 1 * 3,25" anthracite bezels CSS module incl. adapter Option A

for SAS HDD bays 0.5" x 5.25"

max. 1 per system max. 1x per System

S26361-F2557-E204

Local Service Panel incl. mount. kit

Customer Self Service

CSS module incl. mounting kit

0.5" x 5.25"

max. 1x per system

S26361-F3269-E1 S26361-F3531-E1

DVD-RW 8x super multi drive Blu-ray Combo slim SATA

all formats, DUAL/DL, DVD-RAM 6x BD-ROM, 16x DVD, 40x CD

SATA BD DL and all CD/DVD formats

0.5 x 5.25", anthracite bezel

0.5 x 5.25", anthracite bezel max. 1x per system

max. 1x per system

S26361-F3266-E1 S26361-F3267-E1 S26361-F3530-E1

DVD-ROM 16/48x DVD-RW 16x super multi drive Blu-ray Combo HH SATA

all formats, DUAL/DL, DVD-RAM 6x BD-ROM, 16x DVD, 40x CD

SATA SATA BD DL and all CD/DVD formats

incl. description (Ger/US) 1.6 x 5.25", anthracite bezel

1.6 x 5.25", anthracite bezel 1.6 x 5.25", anthracite bezel max. 1x per system


If installation is done locally, make sure you have internal

S26361-F2575-E1 or external FDD available for driver installation.

Floppy disk drive 1" Following USB Components are available

Connector: 26pin 1) USB DVD SM / Blu-Ray

incl. description (Ger/US) External SuperMulti Drive (as soon as released) S26341-F103-L82

1" * 3.5", anthracite bezel External Blu-Ray Drive (as soon as released) S26341-F103-L83

max. 1x per system 2) USB Keyboard: KBPC PX D, professional keyboard S26381-K340-V120

3) USB Mouse: Optical Wheel Mouse Tilt USB/PS2 S26381-K415-L100

4) USB Memorybird:

Memorybird P 4GB, SLC flash S26391-F6047-L104

MyUSBS A910 8GB, MLC Flash S26391-F6048-L208

E



E PRIMERGY TX150 S6 Status 2010-04-30internal backup devices

S26361-F3270-E1 S26361-F3257-E4

SCSI U320 Controller 4 port SAS RAID Controller

Adaptec SCSI Card ASC-29320LPE (Colonial) LSI

1 channel: LVD MegaRAID SAS 1064

LVD connect. for HD, without cable For internal SAS Backup drives no Cache, no BBU

PCIe an additional 4-port SAS controller RAID 0, 1 & 1E

max. 1x per system has to be configured SAS 3Gb/sec

4 internal ports

S26361-F2814-E6 PCIe x4, 160mm

68-Pin Kit for accessible drives max. 1x per system

Cable with Terminator

To connect acc. drives to

separate SCSI controller

max. 1x per system

S26361-F3964-E3 S26361-F3459-E3 S26361-F3963-E3

Tape drive LTO2HH Ultrium SCSI Tape drive LTO3HH Ultrium SCSI Tape drive LTO4HH Ultrium SAS

200GB, 24MB/s, U160 SCSI 400GB, 60MB/s, U320 SCSI 800GB, 120MB/s, SAS 3Gb

Connector: HD68 Connector: HD68 Connector: SATA

without cable without cable incl. SAS cable

incl. description (Ger/US) incl. description (Ger/US) incl. description (Ger/US)

data and cleaning cartridge data and cleaning cartridge data and cleaning cartridge

1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel


S26361-F2848-E3 S26361-F3225-E3

Tape drive DDS Gen5 SCSI Tape drive DDS Gen6 SCSI

S26361-F2848-E31 (only for OBDR) 80GB, 6MB/s, U160 SCSI

DDS-G5 for One buttom dis. recov. Connector: HD68

36GB, 3MB/s, U2W SCSI without cable

Connector: HD68 incl. description (Ger/US)

2x without cable data and cleaning cartridge

incl. description (Ger/US) 1.6 * 5.25", anthracite bezel

data and cleaning cartridge max. 1x per system

1.6 * 5.25", anthracite bezel

max. 1x per system

S26361-F3325-E3 S26361-F3324-E3 S26361-F3857-E1

Tape drive DDS Gen6 USB 5.25" Tape drive DDS Gen5 USB 5.25" RDX drive USB 5.25" internal

80GB, 6MB/s, USB 2.0 36GB, 3MB/s, USB 2.0 80-320GB, 25MB/s, USB 2.0

Connector: USB "B" Connector: USB "B" Connector: USB "B" For later installationincl. description (Ger/US) incl. description (Ger/US) incl. description (Ger/US) of DDS Drives use

data and cleaning cartridge data and cleaning cartridge without RDX cartridges S26361-F3324-L4

1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel


SCSI Controller for external backup drives (PRIMERGY SX10)

RDX cartridges must be ordered separately

S26361-F3270-E1 RDX 80GB = S26361-F3857-L80

SCSI U320 Controller RDX 160GB = S26361-F3857-L160

Adaptec SCSI Card ASC-29320LPE (Colonial) RDX 320GB = S26361-F3857-L320

1 channel: LVD

LVD connect. for HD, without cable

PCIe

max. 1x per system

SAS Controller for external backup drives (FiberCat TXF)

as soon as available

S26361-F3271-E1

8port SAS

LSI3442E

4port intern, 4port extern

PCIe

max. 1x per system

F



F PRIMERGY TX150 S6 Status 2010-04-30

Section VI Hard disks drives

SAS/SATA LFF (3.5") Base Units: SAS HDD Require SAS Controller! see section VIII internal Disk Array

There is a 6 port SATA controller in the Base Unit.

Up to 4 SATA LFF (3.5") hard disks can be configured.

Mixed Configurations are not supported in SATA base units.

If you need SAS, you can choose between two types of 8 port SAS controller to enable the Base Unit.

Up to 4 SAS or SATA LFF (3.5") hard disks can be configured.

If LFF SAS HDD Extension Box, Option C is used up to 6 SAS LFF (3.5") hard disks can be configured.

Mixed Configurations of SAS and SATA HDDs connected to the same Backplane are not supported.

If you need to run Mixed Configurations:

- order the SATA drives needed as L-Number

- make shure SAS and SATA drives are not used on the same Backplane

Hot replace is only possible running RAID.

S26361-F3204-E573 S26361-F3204-E514 S26361-F3204-E530 S26361-F3204-E545

HD 73GB 15krpm 3.5" HD 146GB 15krpm 3.5" HD 300GB 15krpm 3.5" HD 450GB 15krpm 3.5"

15.000rpm,<4ms, 8MB Cache 15.000rpm,<4ms, 8MB Cache 15.000rpm,<4ms, 8MB Cache 15.000rpm,<4ms, 8MB Cache

SAS 3Gb/s SAS 3Gb/s SAS 3Gb/s SAS 3Gb/s

hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray

max. 4/6x per system max. 4/6x per system max. 4/6x per system max. 4/6x per system

4/6x

S26361-F3204-E560

HD 600GB 15krpm 3.5"

15.000rpm,<4ms, 8MB Cache

SAS 3Gb/s

hot plug/hot replace tray

max. 4/6x per system

S26361-F3218-E160

HD 160GB 7.2krpm 3.5"

7200rpm,<9.0 ms, 8MB Cache

SATA 3Gb/s

hot plug/hot replace tray

max. 2x per system

4x

S26361-F3265-E250 S26361-F3265-E500 S26361-F3265-E750 S26361-F3265-E100

HD 250GB 7.2krpm 3.5" HD 500GB 7.2krpm 3.5" HD 750GB 7.2krpm 3.5" HD 1TB 7.2krpm 3.5"

7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache

SATA 3Gb/s SATA 3Gb/s SATA 3Gb/s SATA 3Gb/s

hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray

max. 2x per system max. 2x per system max. 2x per system max. 2x per system

SAS SFF (2.5") Base Units: Requires SAS Controller! see section VIII internal Disk Array

you can choose between two type of 8 port SAS controller for the Base Unit.

Up to 8 SAS SFF (2.5") hard disks can be configured as standard.

Hot replace is only possible running RAID.

S26361-F3208-E173 S26361-F3208-E114

HD 73GB 10krpm 2.5" HD 146GB 10krpm 2.5"

8x 10000rpm,<4,5ms, 8MB Cache 10000rpm,<4,5ms, 8MB Cache

SAS 3Gb/s SAS 3Gb/s

hot plug/hot replace tray hot plug/hot replace tray

max. 8x per base unit max. 8x per base unit

G



G PRIMERGY TX150 S6 Status 2010-04-30

Section VII External SAS Disk Array

S26361-F3890-E1 S26361-F3890-E10

8 port SAS RAID Controller 8 port SAS RAID Controller

LSI LSI

MegaRAID SAS8880E MegaRAID SAS8880E

512MB Cache with ECC 512MB Cache with ECC

RAID 0, 1, 10, 5, 50, 6 & 60 RAID 0, 1, 10, 5, 50, 6 & 60

without iBBU with iBBU

SAS 3Gb/sec SAS 3Gb/sec

8 port external 8 port external

PCIe x4, 167mm PCIe x4, 167mm

low profile bracket low profile bracket


Section VIII internal Disk Array

SATA Configuration

SATA Base Units contain a 6-port on-board SATA controller supporting RAID Levels 0, 1

RAID 5 requires a FW-Extension option (iButton)

S26361-F3217-E100

SATA Software RAID5 LSI

LSI MegaSR

enabling key

SATA 3Gb/sec

internal SATA port only

uses SATA ports of Southbridge

max. 1x per system

SAS Configuration

you can choose between two types of 8 port SAS controller for the Base Unit:

- LSI 1068e based Modular RAID 0,1 (IME)

- LSI 1078 based Modular RAID 5,6

if you want to use SAS harddisks one Controller is required

Controller for 1 to 8 LFF (3.5") or SFF (2.5") HDD

S26361-F3257-E8 S26361-F3257-E256 S26361-F3257-E512

8 port SAS RAID Controller 8 port SAS RAID Controller 8 port SAS RAID Controller

LSI LSI LSI

MegaRAID SAS 1068 MegaRAID SAS 1078 MegaRAID SAS 1078

RAID 0, 1 & 1E 256MB Cache with ECC 512MB Cache with ECC

no controller cache optional BBU optional BBU

SAS 3Gb/sec SAS 3Gb/sec SAS 3Gb/sec

8 internal ports 8 internal ports 8 internal ports

PCIe x4, 160mm PCIe x4, 160mm PCIe x4, 160mm

with combi bracket with combi bracket with combi bracket


S26361-F3257-E55

Cache Battery Backup Unit L-Order-Number is:max. 1x per Controller S26361-F3257-L10

H



H PRIMERGY TX150 S6 Status 2010-04-30

Section IX Communication / Network

1x on-board LAN Controller

Fast Ethernet Controller on-board Teaming: Failover, Load Balancing

1GBit Bcom 5755 If used with additional server adapter, the

with TPM 1.2 onboard LAN controller can operate in Teaming Mode.

ext: for RJ 45 connector

SW: VLAN

A) PCI Adapters with Teaming capability 10-1000TX /SX

S26361-F3142-E2 Teaming: Failover, Load Balancing

Gigabit Ethernet Controller 1000TX If used with additional server adapter, the

2x Eth Ctrl 1x1Gbit PCI32 PRO/1000GT Cu Intel Pro/1000 GT Desktop Adapter can operate in Teaming Mode.

Intel Pro/1000 GT Desktop Adapter

PCI 32 (33/66MHz),

ext: for RJ45-connector, Cat 5

max. 2x per system

B) Dual Port PCI-Express Adapter 1000TX

S26361-F3228-E1

Gigabit Ethernet Controller Dual 1000TX

Eth. Ctrl 2x1Gbit PCIe PRO/1000PT Cu

Intel Pro/1000PT dual Port Server Adapter

PCIe x4

ext: for RJ45-plug, Cat 5

max. 2x per system

C) PCI-Express Adapter 1000TX/SX

S26361-F3241-E1 S26361-F3242-E1 S26361-F3516-E1

Gigabit Ethernet Contr. 1000TX Gigabit Ethernet Contr. 1000SX Gigabit Ethernet Controller 1000TX

Eth Ctrl 1x1Gbit PCI-e Pro/1000PT Cu Eth Ctrl 1x1Gbit PCI-e Pro/1000PF LC Eth Ctrl 1x1Gbit PCI-e Gigabit CT DT Cu

3x Intel PRO/1000 PT Server Adapter Intel PRO/1000 PF Server Adapter Intel® Gigabit CT Desktop Adapter

PCIe x1 PCIe x4 PCIe x1

ext: for RJ45-connector, Cat 5 ext:LC-connector ext: for RJ45-connector, Cat 5


D) Quad Port PCIe Adapter 1000TX

S26361-F3462-E1

Gigabit Ethernet Controller Quad 1000TX

Eth Ctrl 4x1Gbit PCI-X PRO/1000PT Cu

Intel PRO/1000 PT Quad Port Low Profile Server Adapter

PCIe x4

ext: for RJ45-plug, Cat 5

max. 2x per system

I



I PRIMERGY TX150 S6 Status 2010-04-30

Section X System management options

S26361-F1790-E241

iRMC2 advanced pack

integrated remote management controller

activation key for

graphical console redirection

and remote media redirection

max. 1x per system

Section XI Miscellaneous

S26361-F2571-E8

External on-board parallel port Interface

Cable and external

connector interface (25 pins)

fits I/O shield cutoff

max. 1x per system for ext.

S26361-F2571-E10

External on-board serial port Interface

Cable and external

connector interface (9 pins) housing offers addional cutoff - no PCI slot occupied

fit´s PCI cutoff (see Info-Box)

max. 1x per system for ext.

J



J PRIMERGY TX150 S6 Status 2010-04-30

Section XII Country specific power cords

A country specific power cord has to be ordered for all floorstand versions:

- once per basic unit and an additional second cable

- if an second hot plug, redundant power supply modul is ordered.

PRIMERGY TX150 S6 Floorstand PRIMERGY TX150 S6 Rack

Power cord for following countries:

1,8 m, grey Country specific power cords are not

required for rack versions, except for USA

T26139-Y1740-E10 D, A, B, F, NL, FIN, S, N, E, P, RUS, TR &Canada. Power cords are shipped in a rack

max. T26139-Y1742-E10 USA, Canada version with inlet connector for non-heating

2 x T26139-Y1743-E10 Switzerland apparatus. (1x with Standard PSU,

T26139-Y1744-E10 UK, Ireland 2x with hot plug upgrade)

T26139-Y1745-E10 Italy

T26139-Y1746-E10 Denmark T26139-Y1742-E10 USA, Canada

T26139-Y3850-E10 Option "no powercord", for Countries without For shipments to USA&Canada, you have to order

specific cable orderable like e.g. China one power cord (1,8m, grey) per power supply.

Attention: For connection of a monitor

to the system an additional country

specific power cord has to be

ordered as option.

Power cord for optional monitor connection for the following countries:

1.8m, grey

T26139-Y1740-L10 D, A, B, F, NL, FIN, N, S, E, P, RUS, TR

T26139-Y1742-L10 USA, Canada

T26139-Y1743-L10 Switzerland

T26139-Y1744-L10 UK, IR

T26139-Y1745-L10 Italy

T26139-Y1746-L10 Denmark

Options and other peripherals

For other options, refer to SystemArchitect and Pricelist.

These options are supplied lose with the shipment.

For suitable peripherals for this product, please refer to SystemArcitect.

Option for Floorstand

keyboards for floorstand versions for following countries: USB Keyboard: S26381-K340-E120

S26381-K397-E110 USA / international KBPC PX D, professional keyboard

S26381-K397-E120 Germany

S26381-K397-E140 France

S26381-K397-E155 Sweden / Finland

S26381-K397-E165 United Kingdom

S26381-K397-E180 Spain

S26381-K397-E185 Italy

End PRIMERGY TX150 S6



Change Report

Date Order number Changes

2009-07-31 S26361-F3239-E760 Core2 Duo E7600 - now available

2009-07-31 S26361-F3239-E630 Core2 Duo E6300 - now available

2009-06-17 S26361-F2748-E533 new graphics card released

2009-06-16 S26361-F3460-E3 Tape drive LTO1HH Ultrium - no longer available

2009-03-31 S26361-F3268-E1 CD-RW / DVD ROM drive - no longer available

2009-02-23 S26361-F3864-E1 no longer available

2009-01-27 S26361-f3239-E337 Xeon UP X3370 (3.00GHz/12M/1333) / 95W now available

2009-01-27 S26361-F3239-E110 Xeon LV UP E3110 (3.00GHz/6M/1333) / 45W now available

2008-12-17 S26361-F1790-E221 RemoteView Software V5.0 - no longer available

2008-12-05 S26361-F3239-E440 Celeron 440 2.0GHz 512kB 800MHz FSB - no longer available

2008-10-28 S26361-F3239-E335 Xeon UP X3350 (2.66GHz/12M/1333) / 95W - no longer available

2008-10-28 S26361-F3239-E306 Xeon UP 3065 (2.33GHz/4M/1333) / 65W - no longer available

2008-10-28 S26361-F3239-E216 Pentium Dual Core E2160 (1.8GHz/1M/800) / 65W - no longer available

2008-10-28 S26361-F3257-E4 4 port SAS RAID Controller - as soon as available

2008-10-28 S26361-F3963-E3 Tape drive LTO4HH Ultrium - as soon as available

2008-10-28 S26361-F3225-E3 Tape drive DDS Gen6 - as soon as available

2008-10-28 S26361-F3964-E3 Tape drive LTO2HH Ultrium LC - as soon as available

2008-10-28 S26361-F3157-E3 Tape Kit LTO2HH Ultrium 200GB no longer available

2009-10-25 S26361-F3516-E1 Gigabit Ethernet Controller 1000TX - now available

2008-09-26 S26361-F3239-E460 Core2 Duo E4600 (2.4GHz/2M/800) / 65W no longer available

2008-09-30 S26361-F3239-E312 New Xeon UP E3120 CPU - now available

2008-09-30 S26361-F3265-E100 HD SATA 3Gb/s 1TB 7.2k hot plug 3.5" - as soon as available

2008-09-01 S26361-F3531-E1 Blu-ray Combo drive HH SATA Low Profile now available

2008-09-01 S26361-F3530-E1 Blu-ray Combo drive HH SATA now available

2008-09-01 S26361-F3239-E220 Pentium Dual Core E2200 (2.2GHz/1M/800) / 65W now available

2008-09-01 S26361-F3239-E336 Pentium Quad Core Xeon UP X3360 (2.83GHz/12M/1333) / 95W now available

2008-07-14 S26361-F3204-E545 HD 450GB 15krpm 3.5" - as soon as available

2008-07-08 S26361-F3239-E720 Core2 Duo E7200 (2.53GHz/3M/1066) / 65W now available

2008-07-08 S26361-F3890-E10 new 8 port SAS RAID Controller with iBBU - as soon as available

2008-07-08 S26361-F3890-E1 new 8 port SAS RAID Controller without iBBU - as soon as available

2008-06-25 S26361-F3204-E130 HD SAS 3Gb/s 300GB 10k hot plug 3.5" no longer available

2008-05-29 S26361-F3239-E450 Core2 Duo E4500 (2.2GHz/2M/800) / 65W no longer available

2008-04-30 S26361-F3239-E214 Pentium DC E2140 no longer available

2008-03-17 S26361-F3239-E460 Core2 Duo E4500 (2.4GHz/2M/800) / 65W now available

2008-03-17 S26361-F3239-E216 Pentium Dual Core E2140 (1.8GHz/1M/800) / 65W now available



2008-02-19 S26361-F3239-E335 New CPU

2007-12-20 S26361-F3436-E4 No TPM - now available

2007-11-22 first draft


primergy tx150 s6 · 2019. 1. 10. · system configurator and order-information guide primergy...

Documents