Download - Parking Garage LED Fixtures & Retrofit Kits
Project
Catalog #
Type
Specifications and dimensions subject to change without notice. DATASHEET 05.06.2014
DESCRIPTION
ORDERING INFORMATION
QG2 1 2 5M 52
Series Light DistPattern
# ofQubes
Color Temp
QG2 1 2 52 5200K
Example: QG2-1-UNVL-2-5M-52-0
The QubePark LED evenly illuminates walkways and parking garages. The classic design of this lumi-
naire seamlessly blends into all forms of architecture. Highly efficient and long-lasting, the QubePark
LED is an ideal replacement for HID. Exceptional high-brightness LEDs result in higher light levels and
significant energy savings. High-efficiency 5200K, 70 CRI LEDs mounted to a metal-core circuit board
and aluminum heat sink, ensure optimal thermal management and long life (L85 124,000 hrs).
FEATURES AND SPECIFICATIONSEquivalent to 175 Metal Halide fixture
Occupancy sensor dims fixture when no occupancy is detected
Mark7 (0-10V) dimming available
Type 5 medium light distribution
Comes fully equipped with power supply
5-year warranty
l
l
l
l
l
l
Input Voltage
ENERGY DATA
5M 5 Medium
Input Voltage (V AC)
System Level Power (W)**
Delivered Lumens (Lm)
System Efficacy (Lm/W)**
Correlated Color Temp (K)
L70 Calculated Life (hrs)*
L85 Calculated Life (hrs)*
Minimum CRI
Operating Temperature (°C)
120 - 480
70
6250
89
5200K
289,000
124,000
70
-40 to 45
UNVL 120-277
UNVH* 277-480
Parking Garage Luminaire
QubePark
SPECIFICATIONSDimensions (in)
Units/carton
Net Weight (lb)
Environmental Rating
14.15 x 17.0 x 4.0
1
10.25
Wet
Options
0 10V Dimming
1 Occupancy Sensor
Variant
CERTIFICATIONUL Listed USA and Canada File# E338791
DesignLights Consortium qualified
l
l
** Measured at 277VAC
* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.
* Not DesignLights Consortium qualified
Project
Catalog #
Type
Specifications and dimensions subject to change without notice. DATASHEET 04.30.2014
US LED | | | | |
DESCRIPTION
Wall Pack Luminaire2-Qube, 120-277V Input
ORDERING INFORMATIONExample: DSCO2-1-UNV-50-2-00
Eco-Night2 is a wall-mounted LED luminaire designed for outdoor area lighting applications. Using
a mere 67 Watts of power and delivering 6250 lumens, the Eco-Night2 is an ideal replacement for
150-250 Watt metal halide wall pack fixtures. The Eco-Night2’s long L70 life expectancy will not only
minimize or eliminate maintenance and replacement costs, but will also promote environmental res-
toration through reduced CO2 emissions and reduced waste/landfill. Backed by US LED’s standard
5-year warranty, Eco-Night2 is a sound investment in performance, longevity and contributing to the
global green movement.
FEATURES AND SPECIFICATIONSLow voltage Class 2 design
Internal Qube LED module features advanced heat sink
Uses at least 70% less power than equivalent metal halide
5-year warranty
l
l
l
l
ENERGY DATA5000K
120 - 277
67
6250
93
112,000
52,000
80
-40 to 50
Correlated Color Temp (K)
Input Voltage (V AC)
System Level Power (W)**
Delivered Lumens (Lm)
System Efficacy (Lm/W)**
L70 Calculated Life (Hrs)*
L85 Calculated Life (Hrs)
Minimum CRI
Operating Temperature (°C)
DSCO2 1 UNV 50 2 00
Series ColorTemp
DSCO2 1 2 00 Standard 50 5000K
Input Voltage120-277
UNV
Variant # of Qubes
SPECIFICATIONS
Dimensions (in)
Units/carton
Net Weight
Environmental Rating
18.22 x 9.12 x 13.88
1
17.05 lbs
Wet
Options
** Measured at 277VAC
CERTIFICATIONUL Listed USA and Canada File# E338791
DesignLights Consortium qualified
Dark Sky Friendly Fixture
LM-79
l
l
l
l
* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.
Project
Catalog #
Type
Specifications and dimensions subject to change without notice.PRELIMINARY DATA
DATASHEET 04.23.2014
2-Qube Flood Light Fixture
ORDERING INFORMATION
QF3 50
Series Color Light DistPattern
CurrentColorTemp
QF3 50 5000K
Example: QF3-1-UNVL-5M-50-1050
DESCRIPTIONQubeFlood3 is a flood light LED luminaire designed to be mounted vertically or horizontally in
outdoor applications. High-performance LEDs provide light where you need it, at a fraction of the
operating cost of HID technologies. With a lifetime of more than >200,000 hours*, QubeFlood3 is the
ideal replacement for 250W metal halide fixtures. Slip-fitter, Pole Mount or Trunnion Mount options are
available for easy and fast installation.
FEATURESSlip-fitter, Pole Mount and Trunnion Mount options available
Type 3M, 5M and lambertian light distribution pattern
5-year warranty
l
l
l
QubeFlood3
CERTIFICATIONUL pendingl
ENERGY DATAInput Voltage (V AC)
System Level Power (W)**
Delivered Lumens (Lm)
System Efficacy (Lm/W)**
Correlated Color Temp (K)
L70 Calculated Life (hrs)*
L85 Calculated Life (hrs)*
Minimum CRI
Operating Temperature (°C)
SPECIFICATIONSDimensions
Units/carton
Net Weight
Environmental Rating
14.25” x 14.25” x 3.75”
1
11 lbs
Wet
120-277/277-480
96
10,300
107
5000K
>200,000
182,000
70
-40 to 40
UNVL 120-277
UNVH 277-480
1050 Standard Flux
† Special order, not stocked
1 Bronze
2 White †
3 Black †
** Measured at 277VAC
* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.
5M
3M
12 Lambertian
PRODUCT DESCRIPTION
Only 4.5” in diameter delivering 4700 Lumens brilliantly equipped with 21 Philips Luxeon T High Power LED’s in 3 clusters.
Optional hardware includes optic packages to meet any distribution requirement: Type 2, Type 2 Wide, Type 3, 15, 25, 50,
75, 120, 360 degrees. Approximately the same size as a par 38 lamp, designers now have the brightness to replace high
wattage HID lamps in a small footprint. Available as both retrofit and new architectural track and combo recessed fixtures.
LED retrofit kits up to 1,000 watt equivalent available
Superior active cooling coupled with proprietary thermal management design ensures the M21LED Module maintains
efficiency at high temperatures, color consistency and low light degradation through its rated life of 100,000Hrs
10 Year Warranty LEDs & Magnetic Levitation Cooling Fan, 5 Year Driver Warranty
Lumen maintenance regulator circuit
LED chips slightly degrade over time. The M21LED Module has a sophisticated regulator circuit which maintains lumen output
over the life of the lamp. Proprietary software includes a special current loop technology to prevent load variation
degradation. As the degradation occurs it adjusts the current to compensate. This means no light level reduction for
100,000hrs +!
561 Energy Saver Program
When selected, this program allows the customer to operate outdoor lamps at 100% output for the first 5 hours of operation,
dimming 50% for 6 late evening hours, than ramping back up to 100% output for the last hour before dawn. This useful
program saves 3 hours of operation per night over 1100 hours per year!
Wattage selection: Your M21LED Module can be set to 4 output wattages. Depending on the application, you may not need full
output and therefore can adjust down to the setting you want.
Approximate wattages:
100%- 60w equivalent to 175w Metal Halide
75%- 50w equivalent to 100w Metal Halide
50%- 40w equivalent to 70w Metal Halide
25%-30w equivalent to 50w Metal Halide
Future Proof Module
As energy efficiency advances in LEDs are made and new bins become available, they will be incorporated into the M21LED
Module, offering higher efficacies, without changing the dimensions and shape of the system. This allows luminaire
manufacturers to plan and design new luminaire ranges for the coming
years.
Benefits
New Lumen Maintenance Circuit
Increased efficacies
Color consistency increased
Dimming options include 0-10V, Wireless
Rated Life 100,000Hrs
High Lumen Output
Substantial energy savings
Enables Intelligent controls and networking
Small Footprint-4.50”
Applications
Offices (areas such as hallways, receptions, boardrooms, etc.)
Hotel lobbies and receptions areas
Retail high-end shops
Commercial/Industrial Interior Space (warehouse, garage)
Commercial/Industrial Exterior Space (parking lots, streets, roadways)
Additional protection
24V Line Voltage Variation regulation
Under Voltage Protection 21v Minimum
Over Voltage Protection 30V shut off
Reset 27V or lower
Over Temp-thermistor-90C shut off
Below 85C turns back on
END USER MODULE ADAPTERS & Fixtures
The M21LED Module is available with optional adapters to facilitate simple retrofit of existing fixture housings.
It is available in new Track and Recessed fixtures.
Brite Energy Solutions
Tom Knoblock
308-367-4542
www.terraluxillumination.com
TerraLUX Linear LED Engine Product Specification (05/14/2013) Subject to change without notice 1
The TerraLUX Linear LED Engine is a fully-integrated, self-contained, plug-and-play LED solution for lighting fixture man-
ufacturers and retrofit installations. The Engine is AC-mains compatible, dimmable, and requires no additional drivers
or special sockets. A compact form-factor, flexible mounting options, and complete integration of drive electronics and
optics, combined with TerraLUX’s patented LEDSense® thermal management circuitry means simple, low-cost integra-
tion, fast time to market, and reliable, long-term operation and lumen maintenance. The TerraLUX Linear LED Engine is
an ideal solution for a wide variety of applications including wall sconces, ceiling fixtures, and recessed applications.
Linear Line Voltage LED Engine
120V or 100-277V AC input
Dimmable with standard phase-dimmers (120V version) or 0-10V dimming systems (100-277V)
Available in 3 sizes : 4”, 6” and 8”
Patented LEDSense® Thermal Management simplifies integration and ensures reliability and lumen maintenance
Available in 2,700K, 3,000K, 3,500K and 4,000K
>50lm/W at 3000k CCT and 85 CRI (120V)
L70 = 60,000 hours
IP-65 Rated
UL Recognized Component
UL 1598C Classified (LED Retrofit Kit)
ENEC Certified Product
5-year warranty
FCC Compliant
RoHS Compliant, Pb Free
INTRODUCTION
FEATURES
Product Specification
www.terraluxillumination.com
TerraLUX Linear LED Engine Product Specification (05/14/2013) Subject to change without notice 2
PRODUCT CHARACTERISTICS
Notes:
Typical Performance @ 25°C Heatsink temperature, Tc. See Relative Light Output vs Temperature and LEDSense® graphs, page 3, for temperature & Power de-rating.
All specifications subject to tolerance of ± 10%
(*) Power draw may be affected by installation with a dimmer—120V version only
PHOTOMETRY
Relative Candela Distribution (3000K—120° lambertian)
Max Candela Value : 154.7
Vertical Plane 90°-270° (Max)
Vertical Plane 0°-180°
Horiz. Cone 5° (Max)
www.terraluxillumination.com
TerraLUX Linear LED Engine Product Specification (05/14/2013) Subject to change without notice 3
LEDSense® OPERATION, THERMAL DERATING, & LUMEN MAINTENANCE
TerraLUX Linear LED Engines employ TerraLUX’s patented LEDSense® Thermal Management Technology to automati-
cally provide maximum light output in various fixtures and operating conditions while assuring long-term lumen
maintenance. LEDSense® regularly measures the operating temperature and ensures compliance with a pre-
programmed temperature and drive-current profile. This profile is based on the LED manufacturer’s LM-80 data report
and minimum L70/60,000 hour lumen maintenance curves (extrapolated per IES TM-21-11). LEDSense® is always ac-
tive, and will compensate for variation in thermal conditions due to heatsinking, ambient air, Engine positioning, or any
other variable that affects the operating temperature. The Thermal De-rating curve below identifies the relative light
output that can be expected under various thermal conditions. The LEDSense® Power Curve identifies the reduction in
input power over temperature.
www.terraluxillumination.com
TerraLUX Linear LED Engine Product Specification (05/14/2013) Subject to change without notice 4
Product Safety Evaluation 120V • UL Standards 8750 (Recognized Component), 1598C (LED Retrofit Kit) • CSA Standard C22.2 No. 250.0-08 100-277V • UL Standards 8750 (Recognized Component), 1598C (LED Retrofit Kit) • CSA Standard C22.2 No. 250.0-08 • ENEC License ENEC-00404 —tested according to EN 62031:2008 (Ta 55°C Tc 85°C)
Radio Frequency Emissions • FCC Part 15, Unintentional Radiators Class A. (120V) • FCC Part 15, Unintentional Radiators Class B. (100-277V)
Reduction of Hazardous Substances (RoHS) European Council Directive 2002/95/EC
Input Current Current : ≤ 120 mA
Input Voltage Range/Frequency Range 120V 90-132 VAC / 47-63Hz
100-277V 90VAC—300VAC / 47Hz—63Hz
Power Factor >=0.90
Electrical Fast Transients IEC/EN 61000-4-5 ±1 kV
Surge IEC/EN 61000-4-5 ±500V Differential mode / ±1 kV Common mode
Voltage Harmonics IEC/EN 61000-3-2
Voltage Dips and Interrupts Mains dips of 30% for 500ms, 95% for 10ms, and interruptions of 95% for 5s
Electrostatic Discharge ± 6 kV Contact mode, ± 10 kV Air Gap
Shock and Vibration Operating – Non Operating
Impact 1 m product drop, 1.3 m steel ball impact
Operating Temperature -40°C to +55°C, 0 to 95% R.H. / 153 hr
Storage Temperature -40°C to +85°C / 60 hr. followed by 20°C to 85°C, 5 to 95% R.H. / 80 hr
Ingress Protection (Water, Dust) IP65
Corrosive Environment 96 Hours Salt Fog Test (5% salt fog at 95°C) per Mil-Std 810F, Method 509.4
Dimmer Compatibility See “Dimmer Compatibility Matrix”
Dimming Standard Conformance NEMA SSL 6-2010 Relative light output vs. phase angle (120V)
Lumen Maintenance L70 =60,000hr per IES TM-21-11 (Based on LED Manufacturer’s measurement per IES LM-80-08 @ 10.000hrs). To be extended as additional data becomes available
Reliability Demonstration 100 units running continuously for 6,700 Hrs each (120V—4”)
Mean Time Between Failures (MTBF) 120V - 4”: >680,000 Hrs. ; 6”: > 275,000 Hrs. ; 8”: > 400,000 Hrs. 100-277V - 4”: >530,000 Hrs. ; 6”: > 312,000 Hrs. ; 8”: > 260,000 Hrs.
TESTS AND CERTIFICATIONS
www.terraluxillumination.com
TerraLUX Linear LED Engine Product Specification (05/14/2013) Subject to change without notice 5
MECHANICAL DIMENSIONS
All dimensions in inches
Thermal Measurement Point (Tc)
www.terraluxillumination.com
TerraLUX Linear LED Engine Product Specification (05/14/2013) Subject to change without notice 6
All dimensions in inches
MOUNTING OPTION: IN-LINE
www.terraluxillumination.com
TerraLUX Linear LED Engine Product Specification (05/14/2013) Subject to change without notice 7
MOUNTING OPTION: OFFSET
All dimensions in inches
www.terraluxillumination.com
TerraLUX Linear LED Engine Product Specification (05/14/2013) Subject to change without notice 8
MOUNTING OPTION: MULTI-UNIT OFFSET
All dimensions in inches
Engine Dim A Dim B
4” 4.08 8.9
6” 6.08 12.9
8” 8.08 16.9
www.terraluxillumination.com
TerraLUX Linear LED Engine Product Specification (05/14/2013) Subject to change without notice 9
Optional Undermount Bracket Kit
All dimensions in mm
4 inch (TLMA-937000008)
6 inch (TLMA-937000009)
8 inch (TLMA-937000010)
Kit Content:
Undermount plate
2 x self drilling flat head screws (mounting to fixture)
2 x Phillips pan head (mounting light engine to plate via straight brackets provided with Retrofit Kit)
www.terraluxillumination.com
TerraLUX Linear LED Engine Product Specification (05/14/2013) Subject to change without notice 10
TerraLUX, Inc.
1830 Lefthand Circle
Suite B
Longmont, CO 80501
Phone: 303-442-4960
E-mail: [email protected]
www.TerraLUX.com
CONTACT INFORMATION
PRODUCT SELECTION & PART NUMBER GUIDE
(Example)
(1) Light engine delivered with Thermal Pad (UL registered Component)
(2) Retrofit Kit Content (UL 1598C Classified):
LED Light Engine + Thermal Pad
2 x straight mount brackets
2 x Offset Brackets 3 x wire nuts
2x sets of self-tapping screws (short and long)
Retrofit Instructions
(*) A more diffuse distribution is available by adding an optional diffuser (180°) distribution. Please refer to the list of optional accessories here below.
Optional Accessories :