Download - Midwest 17 2014
By Dorinda AndersonCEG CORRESPONDENT
Construction of a 20,000 barrel per-day dieselrefinery near Dickinson in western North Dakotabegan in late March 2013. This is the first refineryto be constructed anywhere in the United States
since 1976, and the first in North Dakota since therefinery in Mandan was built in 1956. This greenfield refinery, meaning from the dirt up, is located4 mi. (6.4 km) west of Dickinson on 318 acres. The $300 million Dakota Prairie Refinery
(DPR) is a 50-50 partnership between energy com-
$3.00
4
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®
MMiiddwweessttEEddiittiioonn
Construction of a 20,000 barrel per-day diesel refinery near Dickinson in western NorthDakota began in late March 2013. This is the first refinery to be constructed anywhere in theUnited States since 1976, and the first in North Dakota since the refinery in Mandan was builtin 1956.
New Dickinson, N.D., DieselRefinery First in U.S. Since 1976
Construction employment expandedin 215 metro areas, declined in 80 andwas stagnant in 44 between June 2013and June 2014, according to a newanalysis of federal employment datareleased July 30 by the AssociatedGeneral Contractors of America.Association officials noted that uncer-
tainty about a range of federal infrastruc-ture and construction programs couldweigh on future growth for the sector.“Contractors have been expanding
their work force in about two-thirds ofthe country for several months in a row,”
EmploymentIncreases inMetro Areas
Doosan Customers Get
Hands-On at Demo...12
Manitou Donates Skid
Steer to College...64
JCB Raises Money at Mud
Run...27
Inside
By David A. LiebASSOCIATED PRESS
JEFFERSON CITY, Mo. (AP)For nearly a century, Missouri hastaxed drivers to pay for its roads.That’s always provided enough— until now. A historic changethat would tax virtually every-
thing they buy in order to yieldmore money for roads andbridges, recently came up for avote. With Congress stymied over
long-term highway funding,many states are taking it uponthemselves to tackle the political-ly uncomfortable task of raising
revenue for their aging transporta-tion systems. In the past year and a half, one-
fourth of the states have hikedtaxes, fees or fines, and at least adozen others are studying options,according to an Associated Pressreview. The push comes as thetraditional revenue sources —
federal and state fuel taxes —have deteriorated because ofmore fuel-efficient vehicles, morepeople driving less, and stagnanttax rates. Support for the hikes has come
from Democrats and Republicansalike, even in tax-averse states
Road Taxes Rise, Even in Tax-Averse States
August 16, 2014 • Vol. IXX • No.17 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
www.constructionequipmentguide.com
Published Nationally
“Contractors have beenexpanding their work
force in about two-thirdsof the country for several
months in a row.”Ken Simonson
Associated General Contractors of America
see EMPLOYMENT page 96see REFINERY page 60
see TAXES page 96
Table of Contents ............4
Truck & Trailer Section........................................37-45
Attachment & PartsSection ......................53-59
Recycling Section ....71-85
Business Calendar ........89
Auction Section ........91-97
Advertisers Index ..........98
Page 2 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hundred of machines. Listings updated daily.
Contact: Jeff Speer FABCO Equipment Inc. 11200 W. Silver Spring Rd., Milwaukee, WI 53225
PROVIDING THE BEST IN
USED EQUIPMENT
800.353.1944 ... For Used Equipment
877.754.4477 .... For Used Work Tools & Attachments
414.461.9100 ...In WI and Upper Michigan
www.FABCO.com
2003 Cat 725 ..........................................$79,000S/N AFX00708, 6425 Hrs, 13,682 Hrs on Frame,
Tires Good, Body Good
1999 Volvo L70C....................................$42,500S/N V15725, hrs unknown, bucket, EROPS,
hyd coupler, tires good
2001 Komatsu HD325-6 ....................$137,500s/n 5907, 13,525 hours, EROPS, tires,
body and sheet metal all good
2004 Volvo L60E....................................$67,500S/N V60363, hours unknown, EROPS, bucket,
lug tires fair, hyd coupler
2008 Cat 950H ....................................$124,500s/n K5K02145, 10,472 Hrs EROPS, bucket, hyd coupler, cutting edge, 2 valve HL, AC
2006 Cat 966H ....................................$179,500S/N A6G00225, 8535 Hrs, EROPS, A/C, GP-bkt,
tires good, engine rebuilt at 7422 hours
2011 Cat 262C........................................$33,000S/N MST03900, 2520 Hrs, EROPS, A/C,
Hyd Quick Coupler, 2-Speed, Bkt, Tires Fair
2003 Hitachi ZX600LC........................$110,000S/N 004015, 10,484 Hrs, EROPS, Undercarriage
Fair, Coupler, Bkt
2011 Cat 966K4....................................$225,000S/N TFS00170, 11,515 Hrs, Bucket, Tires Good,
EROPS, A/C, Auto Lube
1991 CAT 772B ....................................$85,000S/N 64W00186, 34,542 Hrs, EROPS, body good,
tires good, good for age
1999 Cat D6M LGP ..............................$69,000S/N 2RN00542, 10,370 Hrs, EROPS, PAT blade,
winch, rear screen, under carriage good
2001 Cat 988G ....................................$152,500S/N 2TW00170, 22,305 Hrs, EROPS, Spade Bkt
w/Teeth, Tires - 2 Good - 2 Fair
1993 Ingersoll Rand ST105 ..................$6,500S/N 5137, 5169 hours, no ROPS,
runs good, drums good
2008 Cat 297C XPS ..............................$30,000S/N GCP00782, 5370 Hrs, EROPS, A/C, High Flow, Bkt, 2-Speed, Self-Leveling, Tracks
Good, New Drive Motor at 5365 Hrs
2004 Cat D6RLGP DSII ........................$81,000S/N ADE00479, 11,090 Hrs, EROPS, A/C, S Blade,
Drawbar, Undercarriage On Run Out
2002 Deere 624H ..................................$57,500S/N 582361, 7172 hours, EROPS, bucket,
hyd coupler, tires fair
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 3
Largest Independent RentalFleet in the Midwest!
Illinois Truck & Equipment 320 Briscoe Drive Morris, Illinois 60450 www.iltruck.comToll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
Over 1000 unitsavailable for rent!
Including: 135 Hydraulic Excavators
Long Reach Excavators
75 Bulldozers
50 Wheel Loaders
Mantis Cranes 30-100 Ton
35 Articulated Dump Trucks
On/Off Road Water Trucks
• Angle Blades & Winches Available
75
Long Reach Excavators
135
B lld755
Long Reach Excavators
Hydraulic Excavators135Including:
leet in the MidFge Larrgest Independent
Long Reach Excavators
ator ors
leet in the Mid1000er Ovver
est Indep
eswwest!leet in the Mid uni10000
R pendent
est! units
entalR
35
Mantis Cranes 30-100 T
50
75•
Articulated Dump T35
Mantis Cranes 30-100 T
Wheel Loaders500
Bulldozers755 vailableAinches Angle Blades & W Winches
rucksArticulated Dump T
on T Ton
vailable
ble fvailaa
eor r rent!ble f for r
ent!
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450 wwwIllinois T
O O
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
ruater T rOn/Off Road W
ruck & Equipment
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
cksuckss
320 Briscoe Drive
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450 www
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450 www
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
Page 4 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted ©2014, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S.Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includingframing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings,letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are sub-ject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not nec-essarily reflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsi-ble for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertise-ments are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally andevery effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
SPECIAL SECTION71 RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section!
Keep up to date with the latest information on recycling,
crushing and screening.
FEATURES12 SWIDERSKI EQUIPMENT HOSTS HANDS-ON
DOOSAN DEMO DAYSwiderski Equipment hosted a demo open house for guests to operate Doosan construction equipment, including excavators (track and wheeled), wheel loadersand various attachments, on Aug. 5 at its Mosinee, Wis., facility.
14 LICA HOSTS FIRST NEBRASKA CONSTRUCTION
EXPO & FIELD DAYThe first annual Nebraska Construction Expo & Field Day held on July 31 was agreat success for the Nebraska LICA chapter.
18 SCORES OF CONTRACTORS TACKLE OHIO RIVER
BRIDGES PROJECTSThe projects, primarily consisting of two river crossings connecting Kentucky andIndiana involving the participation of both states, are designed to improve safetyand traffic conditions and promote economic development in the area.
25 NO AGREEMENT ON HOW TO PAY FOR ROADS
AMONG TAXPAYERSSix in 10 Americans think the economic benefits of good highways, railroads andairports outweigh the cost to taxpayers. Yet there is scant support for some of themost frequently discussed options for paying for construction of new roads or theupkeep of existing ones, according to a new Associated Press-GfK poll.
27 JCB’S ’14 MUD RUN & DIG THE RIDE RAISES
MORE THAN $100KMore than 2,000 runners, riders and spectators got “down and dirty” at JCB’sthird annual Mud Run and first-ever Dig the Ride cycling event at the company’sNorth American Headquarters in Savannah, Ga.
33 CONCRETE BRIDGE DESIGN SURVIVES SERIES OF TESTSA 52-ton (47 t) concrete bridge survived a series of 10 earthquakes in the firstmultiple-shake-table experiment at the University of Nevada’s new Earthquake
Engineering Lab in Reno.
34 SPONSORS GATHER FOR AGC OF MINNESOTA GOLF TOURNAMENTAnother full field of golfers enjoyed a beautiful round at Stonebrooke Golf Club,Shakopee, Minn., at AGC of Minnesota’s annual golf tournament on Aug. 1 to benefit the AGC of Minnesota Foundation.
64 MANITOU DONATES NEW GEHL SKID LOADER TOUNIVERSITY OF WISCONSINA new Gehl skid loader was delivered to the grounds of University Wisconsin-Washington County, in West Bend, Wis., as a donation from Manitou Americas Inc.
66 PIRTEK REPORTS SECOND QUARTER EARNINGS INCREASEPIRTEK, a service provider of on site hose replacement, noted second quartergrowth of 25 percent revenue increase compared to the second quarter of 2013.
66 SITEWATCH IPAD APP OPTIMIZES ACCESS TOEQUIPMENT DATAFurther empowering construction companies to improve productivity, run moreefficiently and decrease maintenance costs, Case Construction Equipmentannounced the introduction of its SiteWatch app for the iPad.
EQUIPMENT44 XL TRAILERS Bottom Dump Trailer
53 KUBOTA 6-in-1 Blade
84 GENESIS GSG Scrap Grapple
DEPARTMENTS89 BUSINESS CALENDAR
89 CLASSIFIEDS
91 COMING AUCTIONS
MIDWEST EDITIONCirculated Throughout • North & South Dakota • Nebraska
• Kansas • Minnesota • Iowa • Missouri• Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky
Founder, Publisher & CEO Edwin M. McKeon Sr.Midwest Publisher Joseph S. McKeon
Editor In Chief Craig Mongeau Associate Editor Christine Reckner
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Tom WeinmannCirculation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034
215/885-2900 Toll Free 800/523-2200
Fax 215/885-2910Web site www.constructionequipmentguide.com
Editorial e-mail [email protected] e-mail [email protected]
For advertising rates Contact Joseph S. McKeon• Illinois • Wisconsin • Northwest Indiana• Missouri • Kansas
773/769-4090Toll Free 800/632-0233
Fax 773/769-4280e-mail [email protected]
Contact Ed Bryden• Central and Eastern Indiana • Michigan • Ohio
• Kentucky
440/268-9690Toll Free 800/810-7640
Fax 440/268-9691e-mail [email protected]
Contact Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota
952/353-1770Toll Free 866/413-4265
Fax 952/353-2750e-mail [email protected]
Mobile LinkedIn Facebook Twitter YouTube
To r ead t he s e s t o r i e s a nd many mo re , v is i t w w w . co n s t r u ct io nequipment guid e . com
IN THIS ISSUE1412 18
®
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 5
Case 1150K LGP, ’06, 1,900 hrs ..............$70,000Cat D6M LGP, ’96, 18,025 hrs ................$44,500Deere 455G, ’96, 6,864 hrs......................$24,500Komatsu D51PX-22, ’08, 4,013 hrs ......$124,500Komatsu D61PX-15EO, ‘07, 4,771 hrs ..$120,000Komatsu D65EX-15EO, ’07, 3,934 hrs ..$149,500Komatsu D65PX-15EO, ‘09, 4,203 hrs ..$140,000Komatsu D155AX-6, ’07, 6,524 hrs ......$239,500Komatsu D275AX-5, ’03, 23,015 hrs ......$99,500
Komatsu GD655-3C, ’06, 1,866 hrs ......$159,500Komatsu GD655-3EO, ’09, 1,287 hrs ....$189,500
Blaw-Knox PF115, ’08, 1,921 hrs ............$14,500LeeBoy 8500LD, ’00, 5,434 hrs ..............$17,500LeeBoy 8500LD, ’08, 910 hrs ..................$74,500Vogele 1110WB, ’05, 3,139 hrs ..............$54,500Vogele 1110WB, ’03, 1,004 hrs ..............$85,000Vogele 5103-2, ’11, 1,273 hrs ..............$250,000
Cat 365CL-MH, ‘08, 10,428 hrs ............$164,500Komatsu P400LC-8MH, ’08, 6,095 hrs ..$219,500
Roadtec RX700, ’08, 4,630 hrs..............$170,000
Wirtgen W60, ’08, 628 hrs ....................$144,900
Wirtgen W60 Rumbler, ’11, 400 hrs......$240,000
Wirtgen W600, ’03, 2,403 hrs..................$77,500
Wirtgen 2000DC, ’96, 9,346 hrs ..............$70,000
Wirtgen W2100, ’04, 8,373 hrs ..................$CALL
Komatsu HD465-5, ’02, 17,763 hrs ............$CALL
Komatsu HD465-5, ’02, 17,763 hrs ............$CALL
Komatsu WA65-3, ’04, 745 hrs................$59,500
Komatsu WA70-5, ‘06, 2,592 hrs ............$47,500
Komatsu WA320-1, ’94, 7,350 hrs ..........$29,500
Komatsu WA320-6, ’08, 3961 hrs..........$126,500
Komatsu WA320-7, ’14, 81 hrs..............$165,000
Komatsu WA380-6, ’11, 2,094 hrs ........$179,500
Komatsu WA380-7, ’13, 1,385 hrs ........$185,000
Komatsu WA450-6, ’07, 8,069 hrs ........$149,500
Komatsu WA470-6, ‘11, 5,520 hrs ........$179,500
New Holland LW190B, ’04, 5,908 hrs......$33,500
Bomag BW205AD, ’02, 3,520 hrs ............$34,500Hamm HD8, ’07, 515 hrs ........................$18,500Hamm HD14VV, ’09, 2,460 hrs ................$29,500Hamm HD90 Ozzy, ’04, 4,300 hrs ............$54,500
Komatsu HM300-2, ’06, 6,500 gal ........$275,000Komatsu HM400-2, ’07, 8,000 gal ........$395,000
Doppstadt SM726 Screen, ’09, 257 hrs $225,000Kleemann MSD190D Screen, ’13, 688 hrs ............................................................................$255,000Kleemann MC110Z Crusher, ’13, 714 hrs..............................................................................$475,000
Deere 490D/Rolly Head, ’88, 12,000 hrs $39,000Norco Puma 220, ’11, 78 hrs ....................$CALLValmet 415EX/Rolly II, ’05, 10,092 hrs $135,000Valmet 840, ’02, 13,000 hrs ....................$60,000Valmet 840.2, ’05, 6,600 hrs......................$CALLValmet 860.4, ’12, 1,640 hrs......................$CALLValmet 911.3, ‘08, 8,655 hrs ................$235,000
Cat 330CL, ’02, 12,032 hrs ......................$69,500Cat 385CL, ’06, 9,646 hrs ..........................$CALLDeere 350DLC, ’07, 5,837 hrs ..............$124,500Deere 350DLC, ’07, 6,832 hrs ..............$115,000Gradall XL4100 III, ’09, 5,191 hrs ........$130,000Hitachi ZX160LC, ’05, 5,876 hrs..............$59,500Kobelco SK400LC Mark IV, ’97 ................$38,500Komatsu PC35MR-2, ‘07, 4,747 hrs ........$26,500Komatsu PC78MR-6, ’05, 6,420 hrs ........$39,500Komatsu PC88MR-8, ‘09, 1,195 hrs ........$74,500Komatsu PC138USLC-8, ’11, 1,142 hrs $124,500Komatsu PC138USLC-8, ’11, 3,218 hrs $104,500Komatsu PC160LC-7, ’05, 8,230 hrs........$54,500Komatsu PC200LC-6, ’01, 5,824 hrs........$59,500Komatsu PC200LC-7, ‘03, 8,114 hrs........$79,500Komatsu PC200LC-7, ’03, 5,975 hrs........$89,500Komatsu PC200LC-7, ’04, 7,640 Hrs ......$89,500Komatsu PC200LC-8, ’06, 5,102 hrs......$109,500Komatsu PC200LC-8, ’06, 4,621 hrs........$97,500Komatsu PC220LC-8, ’06, 9,084 hrs........$96,500Komatsu PC220LC-8, ’07, 5,757 hrs......$119,500Komatsu PC220LC-8, ’09, 4,707 hrs......$129,000Komatsu PC300LC-6, ’99, 16,882 hrs......$39,500Komatsu PC300LC-7EO, ’06, 6,320 hrs ..$99,500Komatsu PC300LC-7EO, ’06, 7,736 hrs $110,000Komatsu PC308USLC-3EO, ’07, 4,402 hrs $214,500Komatsu PC400LC-7, ’04, 10,300 hrs......$99,500Komatsu PC400LC-7, ’05 8,163 hrs ......$124,500Komatsu PC400LC-7, ’05 11,134 hrs ......$92,500Komatsu PC400LC-7EO, ’07, 3,991 hrs $204,500Komatsu PC400LC-8, ’08, 3,815 hrs......$209,500Komatsu PC450LC-8, ’11, 2,389 hrs......$309,500Komatsu PC600LC-7, ’05, 10,328 hrs....$199,500Komatsu PC600LC-7, ’05, 4,910 hrs......$369,500Komatsu PC600LC-8, ’06, 10,478 hrs....$199,500Komatsu PC650LC-5, ’95, 17,615 hrs......$42,500Komatsu PC750LC-7, ’04, 6,613 hrs......$349,500
Volvo EC240CLR, ’11, 454 hrs ..............$195,500
DOZERS
GRADERS
PAVING
MILLING
OFF ROAD TRUCKS
WHEEL LOADERS
COMPACTION
WATER EQUIPMENT
EXCAVATORS
CRUSHING/SCREENING
MATERIAL HANDLERS
FORESTRY
15 Roland Branch Locations in IL, IN, MI, MO, and WI
V
I
S
I
T
R
O
L
A
N
D
M
A
C
H
I
N
E
R
Y.
C
O
MCall Jay Germann (217) 789-7711 • Email: [email protected]
Case 1150K LGP, ’06, 1,900 hrs ..............$70,000 Blaw-Knox PF115, ’80, 1,921 hrs ..............$14,500
Financing Available for Qualified Buyers
Quality Used Equipment...with support to back it up
Komatsu PC200LC-7,’03, 5,975 hrs ........$89,500Gradall XL4100 III, ‘09, 5,191 hrs ..................$130,000
Page 6 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CX130 Excavator
$410/Day, $1,230/Week, $3,690/Month
CX240 Excavator
$700/Day, $2,100/Week, $6,300/Month
CX210 Excavator
$580/Day, $1,740/Week, $5,220/Month
CX460 Excavator
$1,235/Day, $3,705/Week, $11,115/Month
CX160 Excavator
$475/Day, $1,425/Week, $4,275/Month
CX330 Excavator
$875/Day, $2,625/Week, $7,875/Month
CX225 Excavator
$755/ Day, $2,265/Week, $6,795/Month
Excavator Rental Specials
Rent Today!
Clean, reliable equipment Competitive rates Rent by the day, week, or month Delivered to your job site
McCannOnline.com
IllinoisAddison
630-627-0000
Bolingbrook*630-739-7770
Chicago312-942-9200
Crestwood708-597-3110
McHenry*815-385-0420
Wauconda847-526-9444
IndianaSchererville*219-865-6545
* Case authorized dealer location
Serving the Constructor ®
Mark Kruepke • (630) 739-7770Bolingbrook, IL
Contact us at [email protected]
View our complete Used & “Like New” inventoryat McCannOnline.com
McCann Rents a full line of heavy and light constructionequipment. Call us today to supply your next rental.
1992 Case 252, s/n JKC7513522, 700Hours, 39 inch Tandem Drum SmoothRoller ................................................$7,300
2012 Case SR250, s/n JAFSR250PBM442384,1000 Hours, Cab W/Heat & AC, Two Speed,Hi-Flow, 78” Bkt ..............................$43,900
1998 Case 1840, s/n JAF0221937, 2800Hours, Rops, Aux Hyds , 60 inch bucket , 10x 16.5 Tires ......................................$9,500
2012 Case CX250CLR, s/nDAC250K6NCSAM1210, 500 Hours, 60’Long Reach, Control Pattern, 60” DitchBucket ..........................................$230,000
2012 Case 850L, s/n NCD80092, 700 Hours,Cab w/Heat and AC, 124” Blade, 24”Grousers ......................................$120,000
2011 Case 580SN, s/n JJGN58SNKAC536021,2480 Hours, Cab w/Heat & Ac ,Extenda-hoe,Ride Control, Two Lever, 4 in 1 Bucket. AuxHyds,12”,18” and 24” Bkts ............$64,750
2012 Case SV250, s/n JAFSV250JBM435496,100 Hours, Cab w/Heat & AC, Two speed, HydCoupler, 78” Bkt , 33 x 15.5 Tries ..$43,500
2010 Takeuchi TL230, s/n 223100051, 750Hours, Cab w/Heat & AC, Aux Hyds,67” toothBkt ..................................................$35,900
STARE Q U I P M E N T
LT D .
Star EquipmentConstruction Equipment & Supplies
Sales • Service • Rentals
www.starequip.com 877-267-7203Des Moines • Ames • Cedar Rapids • Waterloo
2012 Takeuchi TL240 TrackLoader, #0018062322, 86HP,Open ROPS, 278 Hrs ......$41,995
1987 John Deere 575 SkidLoader, #370721, 33HP, OpenROPS, 1775 Hrs ..............$5,995
2011 Takeuchi TW80CArticulating Loader, #110930,Cab, Heat, A/C, 260 Hrs ..$60,950
2006 Gehl RS842 Rough Terrain Forklift,#215758, 2818 Hrs ......................$43,995
2005 Mustang 2054 Skid Loader,#00626923020, 2465 Hrs ....................Call
Since 1985!
CALL JENNIFER TODAY!(888) [email protected]
www.RBusedParts.com
NEW, USED & REMAN PARTS• Undercarriage
• Arms & Booms
• Cylinders
• Valves
• Transmissions
• Pumps
• Engines
• and More!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 7
Milwaukee, WI1-800-236-6900Fax 414-541-1892
Wausau, WI1-800-242-7113Fax 715-675-9748
Crushing & Screening Div.Little Chute, WI1-800-236-8318Fax 920-788-6753
YOUR AUTHORIZED DEALER
in WISCONSIN and UPPER MICHIGAN for:
For information on our in-stock equipment, contact Lanny Peterson at:[email protected] or
mobile 1-715-574-8089 or 1-800-242-7113
AGGREGATE EQUIPMENTALLIS 500-SD PORTABLE CONE CRUSHER, 300 HP electric motor, rear feed conveyor, side discharge conveyor,motor control panel, tri-axle, hydraulic leveling ................................................................................................$130,000JCI/FABTEC 6’X20’ TD DUAL SCREEN PLANT, (2) 30” reversing conveyors under primary screen, 60” conveyorunder secondary screen, (3) 42” cross conveyors (6) hydraulic leveling jacks, motor control panel ............$182,500JCI K-300 “KODIAK” PORTABLE CONE PLANT, 300 hp electric motor, 36”x 20’ side discharge conveyor, 36”x 35’feed conveyor, motor control panel, hydraulic leveling......................................................................................$375,000POWERSCREEN 510 COMMANDER RINSER SCREEN PLANT, 11.8 Yd. hopper with hydraulic dump grizzly, 36” feedconveyor, 5x10 3-Deck screen, tandem axle, Deutz diesel ..................................................................................$52,400
EXCAVATORSDEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8”Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight,5800 Frame Hours and Recent Engine Rebuild........................................................................................$95,000LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel,33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads adnRemovable Sideframes, Approx. 190,000 Lb. Working Weight ....................................................................CALL
CRANESGROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom,32’ to 56’ Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................$155,900GROVE TM9120 100 TON TRUCK CRANE, 1997, 42’ to 130’ boom, 33’ to 58’ offsettable telescopic swingaway,Grove HO50 main & aux. hoists, LMI, Cummins 6CT8.3 diesel, mounted on a Grove 8 x 4 chassis with aCummins N14 diesel and Roadranger transmissions. Tandem boom dolly ....................REDUCED TO $299,000GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1995, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$159,500LIEBHERR HS883HD DUTY CYCLE HYDRAULIC CRAWLER CRANE, 132 Ton Class, (2 Available) with LiebherrV8 Diesels, Main Hoists with 44,000 SLP or 66,000 SLP, 115’ Main Boom, Removable Sideframes ..........CALL
GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS
• LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLERCRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/
JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAGCRUSHERS • MANITOWOC CRANES
GROVE RT760 ROUGH TERRAIN CRANEGROVE TM9120 TRUCK CRANE
Large Selection of New & Used Equipment in Stock.
View us at:www.amstate.com
Contact Marty in Illinois1-800-307-0221
Photos & Detail Descriptions view:
www.finkbinerequipment.com
CEDAR RAPIDS CR662RM - ‘10, 1497 Hrs, MTV w/Hopper Insert, THRU SHOP CURRENTUPDATES ADDED, #61981A, S/N JO798 ..........................................................................$239,878GOMACO COMMANDER III - ‘12, 150 Hrs, 12’ Pan, Details on Request ........................$439,000LEEBOY 8500T - ‘02, 2,489 Hours, Low Deck, machine ready to work, #C000341..........$33,456MAULDIN 1500 - ‘03, 844 Hrs, Track Conveyor Feed, 8’-13’ Screed, #61999A, S/N 1134 ......................................................................................................................................................$27,950MIDLAND SPR6 - ‘13, 125 Hours, take a look at this its ready for work right hand discharge,#C000040, S/N 212 ........................................................................................................$105,095MIDLAND SPD8 - ‘12, 296 Hrs, Ready to go, #61979A, S/N 466....................................$144,950NEAL CART PATH PAVER - ‘08, 638 Hrs, 5’-8’ Screed Conveyor Feed, #61886A, S/N 03-0608 ..............................................................................................................................................$32,500
CALL items may be on rent causing pricing and hours to vary.
WIRTGEN W50DC - ‘13 • 20” Cut, Deep Cut Machine, 3 Wheel, Rear Discharge Mill, 73 Hrs ..$214,950
INGRAM 315 - 4 to Choose from, 3 Wheel Static Roller, s/n & Hrs Available ..............$26,500 Ea.SAKAI R2H-2 - ‘12, 388 Hrs, 3 Wheel Static, 83”, #61950A, 1R5-60251 ........................$83,795SAKAI R2H-2 - ‘13, 90 Hrs, 3 Wheel Static, #C000223, 1R5-60309 ................................$89,795SAKAI R2H-2 - ‘13, 30 Hrs, 3 Wheel Static, #C000252, 1R5-60313 ................................$93,412SAKAI R2H-2 - ‘13, 291 Hrs, 3 Wheel Static, #C000312, 1R5-60312 ..............................$87,750SAKAI SW850-2 - ‘11, 211 Hrs, 79” Double Drum Vibratory Roller, #61870A, S/N 50152......................................................................................................................................................$92,578SAKAI SW880 - ‘12, 292 Hrs, 79” Double Drum Vibratory Roller, #61938A, S/N 10142$117,980SAKAI SW652 - ‘12, 216 Hrs, 57” Double Drum Vibratory Roller, #61937A, S/N 20167..$79,850SAKAI SW300 - ‘13, 55 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156..$33,950SAKAI SW502 - ‘13, 233 Hours, 51 inch drum 9000 lb remaining std and or eptw warranty,#C000212..........................................................................................................................$41,974
*Comes with any remaining standard and 3 year extended power train warranty.
GRADALL XL4100 - ‘94, 8368 Hrs, Working as is, #C000386, S/N 414218......................$19,500GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282 ....................$25,000GRADALL XL4100 - ‘02, 7745 Hrs, Good Machine, #C000402, S/N 411552 ....................$42,500GRADALL XL4100 - ‘02, 7068 Hrs, Call on this One, S/N 415548 ....................................$53,950LIEBHERR A904C - ‘11, 1435 Hrs, No Buckets w/Machine, Many Buckets in Stock for This ................................................................................................................................................$156,950
MILLING MACHINES
ROLLERS
PAVERS / ROAD WIDENERS
EXCAVATORS
Page 8 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
USED EQUIPMENTAuthorized Bobcat® DealerBobcat 440 ................Starting at $4,500Bobcat 463’s ..............Starting at $8,000Bobcat 542B ..............Starting at $6,900Bobcat 642 ..............................$7,500Bobcat 642B ............................$8,500Bobcat 743 ................Starting at $8,000Bobcat 751 ......Several Starting at $9,900Bobcat 753 ..............Starting at $10,000Bobcat 763F, Series, Open Cab ....$11,500
Bobcat 773G, With Heat ............$15,900Bobcat 843, Heated Cab ............$10,000Bobcat 853’s ............Starting at $11,000Bobcat 863, With Heat ..............$12,900Bobcat 863G ............................14,900Bobcat 873 ............................$17,900Bobcat S130, 2006, Heated Cab ......CALLBobcat S185s, With Heat and Air, 500Hours to 5000 Hours....Starting at $14,900Bobcat S250..............Starting at $17,500
Compact Track MachinesBobcat T190’s............Starting at $17,500Bobcat T200..............Starting at $17,500Bobcat T250, Gold ......Starting at $24,500Bobcat T300..............Starting at $25,000Other BrandsGehl 4615 Skidloader, Open Canopy $8,500Mustang 2105 ............................CALLNew Holland L175........................CALLJohn Deere 250/260 Models Available....................................................CALL
ExcavatorsBobcat 331’s, Several w/Heat & Open
Canopys ..................Starting at $15,900
Bobcat 334 ................................CALL
Bobcat 337D, A/C, HT................$35,900
Bobcat 341 ..............Starting at $29,990
Bobcat 442 ....Several Starting at $45,000
Large Used Trailer Selection Starting at $1,500
Authorized Bobcat Dealer
NEW M-SERIES IN STOCK!
Bobcat Forestry Cutter on T320, for Rent
Largest Selection in the Midwest!
Bobcat Tractors in Stock Now!Call for Pricing.
Ask about Incentives and Financing.
Toolcats in Stock, Call for Pricing Bobcat S650 with SB240 SnowblowerAvailable Today
U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672
New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281www.farmriteequip.com
Bobcat Excavatorsin Stock, Call for Pricing
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 9
ALEX E. PARIS CONTRACTING COMPANY, INC.Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820Call Andy Miller Established 1928
Our Greatest Assets .. Our Employees
Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25rubber, 15K hours, work ready . . . . . . . . . . . .$42,500Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500John Deere 624G, 1996, EROPS, quick coupler, GPbkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000Volvo L60E, 2005, EROPS, coupler, aux hyd, boomsusp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500
IR SD100D Pro-Pac Vibratory Compactor, 1999,Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500IR SD105DX, 2002, 84" drum, OROPS, clean $69,500IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit,ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, verynice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000(4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, allwork ready . . . . . . . . . . . . . . . . . . . . . .From $79,500Multiquip MR8G Walk Behind Vibratory Compactor,1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500Rammax Walk Behind Rollers, over 25 in stock, lever& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000(8) Sheepsfoot, 48" and 60", double drum & singledrum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500
Case/IH 485 Utility Tractor, 1986, Case 3 cyl dslengine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72"hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hydangle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500
Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000
Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD,29.5R25, A/C, 29 cy cap. sideboards, tailgate (current-ly off work), work ready . . . . . . . . . . . . . . . .$127,500Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25,working everyday . . . . . . . . . . . . . . . . . . . . .$145,000Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C,P/S trans, tailgate, work ready . . . . . . . . . . .$115,000Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires,approx 7,000 hrs, good condition . . . . . . . .$147,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,P/S trans, working everyday on jobsites . . . . .$87,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C,P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500
(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade,winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea.Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea.
Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel,10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500Grove RT58C, 1981, down cab, 18 ton r.t., 70' boomanti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500
Cat 613C Water Wagon, 1994, 5000 gal drop tank,ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500Cat 621F, 1996, Scraper, OROPS, 33.25x2, very goodcondition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALLCat 621E, 1989, Scraper, OROPS, 33.25x29, very nice
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL
JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou-pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber,operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER
Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, longstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44"Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6"TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000(5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALLKomatsu PC160 LC-7KA, 2004, 24” TBG pads, JRBcoupler, plumbed, 8’6” width, nice, work ready . .CALLVolvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick,5.12 cy bkt, 22,000# ctwt, hammer/shear plumbingvery good condition . . . . . . . . . . . . . . . . . . .$159,000
(2) 48' Box Vans w/Liftgates, Good Condition . .CALL
IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL
(12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . .From $5,200
Case 580L Rubber Tire Loader Backhoe, 1997,OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500
John Henry Drill Mtd on Cat 320N, 1994, 24' mast,Duraquip dust collection . . . . . . . . . . . . . . . .$150,000
(2) Balderson Broom Attachment for Cat IT Machines,8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea.
BUCKETSPC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500Over 100 Excavator, Loader, Specialized & Grapple
Buckets in Stock-Call For Your Needs
FORKS(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style,excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000
Others Available CallPrices Are Negotiable - At Your Inspection
All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.
TRUCKS & TRAILERS
CRAWLER LOADERS
OFF ROAD HAULERS
MOTOR SCRAPERS
DRILLS
ATTACHMENTS
MISCELLANEOUS
WHEEL LOADERS
HYDRAULIC EXCAVATORS
CRAWLER TRACTORS
COMPACTORS
LANDSCAPING
CRANES
SPECIALS
BACKHOES
AIR COMPRESSORS
Page 10 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Your VOLVO dealer in:
North DakotaBismarckFargoMinot
North CarolinaCharlotteRaleighAshevilleGreenville
South CarolinaColumbiaNorth CharlestonPiedmont
GeorgiaBufordForest ParkSavannah
East TennesseeKnoxvilleChattanooga
Asphalt/Pavers/Concrete Equipment2004 VOLVO PF5510, 148 Hrs ........................................................................$25,0002006 VOLVO PF6110, 2866 Hrs....................................................................$166,700(2) 2007 VOLVO PF6110, 2809 Hrs-3061 Hrs..............................$166,700 EA.(2) 2008 VOLVO PF6110, 3258 Hrs ......................................$166,700-$167,0002011 VOLVO PF6110, 1956 Hrs....................................................................$206,000
Compactors-Smooth Drum2010 VOLVO DD112HF, 1664 Hrs..................................................................$88,9002008 VOLVO DD118HF, 2018 Hrs..................................................................$83,5002007 VOLVO DD90HF, 1748 Hrs ....................................................................$58,5002012 VOLVO SD116DX, 1415 Hrs ..............................................................$116,700
Excavators-Crawler2008 VOLVO EC210C LC, 2764 Hrs ..........................................................$122,5002011 VOLVO EC210CL, 3473 Hrs................................................................$138,900(3) 2013 VOLVO EC220D, 2005 Hrs-2315 Hrs ..............$139,000-$150,0002008 VOLVO EC240C, 2268 Hrs ....................................................................$80,5552011 VOLVO EC250DL, 2778 Hrs................................................................$161,2502004 VOLVO EC290B LC, 9540 Hrs ..............................................................$52,7772004 VOLVO EC330B, 5800 Hrs ....................................................................$52,7772011 VOLVO EC340DL, 4099 Hrs................................................................$177,800(4) 2012 VOLVO EC340DL, 2180 Hrs-2818 Hrs ............$205,600-$211,200(2) 2013 VOLVO EC340DL, 1110 Hrs-2360 Hrs ............$211,250-$216,7502011 VOLVO EC460C LC, 5048 Hrs ..........................................................$250,0002012 VOLVO EC480DL, 2277 Hrs................................................................$328,000(2) 2013 VOLVO EC480DL, 1681 Hrs-2056 Hrs ............$324,500-$330,000
Excavators-Mini (up to 12,000 lbs)2004 VOLVO EC55, 6032 Hrs ..........................................................................$27,7772008 VOLVO EC55B, 4265 Hrs........................................................................$40,555
Excavators-Wheel(2) 2011 VOLVO EW180C, 2576 Hrs-2908 Hrs ..............$161,200-$166,7002012 VOLVO EW180D, 1690 Hrs..................................................................$194,500
Motor Graders2002 VOLVO G720 VHP, 2175 Hrs ................................................................$72,2252011 VOLVO G946, 1723 Hrs ........................................................................$211,2002011 VOLVO G946B, 1957 Hrs ....................................................................$211,200
Off-Highway Trucks2004 VOLVO A25D, 6012 Hrs ........................................................................$206,000(3) 2012 VOLVO A25F, 1873 Hrs-7068 Hrs ......................$283,500-$305,750(2) 2011 VOLVO A30E, 3110 Hrs-3579 Hrs ....................$283,500-$372,500(8) 2012 VOLVO A30F, 2290 Hrs-3450 Hrs ......................$316,750-$333,5002013 VOLVO A30F, 2312 Hrs ........................................................................$324,500(2) 2012 VOLVO A35F, 1961 Hrs-2960 Hrs ......................$388,300-$415,000(8) 2011 VOLVO A40F, 3077 Hrs-6261 Hrs ......................$322,300-$399,000(20) 2012 VOLVO A40F, 1697 Hrs-4651 Hrs ..................$340,500-$447,000(2) 2013 VOLVO A40F, 3100 Hrs ........................................................$388,300 EA.2013 VOLVO A40F FS, 2087 Hrs..................................................................$494,750
Water Equipment - Truck2006 VOLVO A30D, 6797 Hrs ........................................................................$255,750
Wheel Loaders2010 VOLVO L110F, 5170 Hrs ......................................................................$155,6002012 VOLVO L110G, 3266 Hrs......................................................................$200,0002009 VOLVO L120F, 6893 Hrs ......................................................................$155,6002005 VOLVO L150E, 20742 Hrs ......................................................................$65,0002009 VOLVO L150F, 6938 Hrs ......................................................................$183,400(3) 2010 VOLVO L150F, 8825 Hrs-11467 Hrs ................$133,400-$133,500(3) 2012 VOLVO L150G, 2674 Hrs-2761 Hrs ..................$267,000-$305,7502011 VOLVO L180G, 3285 Hrs......................................................................$278,0002013 VOLVO L180G, 2691 Hrs......................................................................$334,0002012 VOLVO L250G, 1751 Hrs......................................................................$399,0002003 VOLVO L50D, 7867 Hrs............................................................................$44,4442010 VOLVO L50F, 8046 Hrs ............................................................................$55,5552013 VOLVO L50GS, 1671 Hrs ....................................................................$123,0002005 VOLVO L60E, 17059 Hrs ........................................................................$33,3332012 VOLVO L70G, 3009 Hrs ........................................................................$144,500(2) 2012 VOLVO L90G, 1520 Hrs-2241 Hrs ..................................$194,500 EA.
2011 VOLVO A40F, 3755 Hrs ....................$351,100 2012 VOLVO A40F, 3147 Hrs ....................$388,3002012 VOLVO A40F, 3015 Hrs ....................$388,300
A40 Finance leasing available for 24 months with payments as low as $7,900 per month. Call Doug Wilson for details.
$
Full inventory at: www.ascvolvo.com
Doug Wilson 704-562-2032 Email: [email protected]
Billy Brice 678-318-9500Email: [email protected]
USED EQUIPMENT
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 11
NORTH DAKOTA
Bismarck701-250-4882Fargo701-271-2360Minot701-839-4020
GEORGIA
Buford678-318-9500Forest Park770-319-0074Savannah912-964-8079
NORTH CAROLINA
Asheville828-687-0620Charlotte704-596-8283Greenville252-754-5280Raleigh919-661-8710
SOUTH CAROLINA
Charleston843-414-1120Columbia803-791-0740Piedmont864-704-1060
TENNESSEE
Chattanooga423-308-7940Knoxville865-525-1845
Join our team today. Call 701.250.4882
ascvolvo.com
YOUR MACHINES KEEP YOU INFORMED.WHILE KEEPING YOU PROFITABLE EVERY DAY.
Smart Works.
The demanding jobs are there. So are you.
Smart Works.
Page 12 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Swiderski Equipment Hosts Hands-On Doosan Demo Day
(L-R): David Hohol of Olson Gravel getssome instructions on operating theDoosan DX235 from Doosan’s DanSteinlicht while his pal Tim Olson, also ofOlson Gravel, watches.
Jim Barry (R), Swiderski Equipment Inc., goes over someof the features of the Doosan 350LC excavator with KevinSwatloski of Swatloski Trucking LLC.
Swiderski Equipment Inc. ownersDianne and Alex Swiderski enjoy theDoosan event, which was held attheir Mosinee, Wis., location.
Dave Framke, owner of Dave Framke Excavating, tries outthe Doosan DX190W wheeled excavator.
Doing some digging with the Doosan DL200 wheel loader isSteve Schneider, Steve Schneider Trucking.
Ron Babl of Dave Framke Excavating gets a feel for theDoosan DX 350LC excavator.
Jamie Gyr (L) of Area Excavating looks over the equipmentchart for the Doosan 225LC excavator with SwiderskiEquipment Inc.’s John Hinner.
Running the Doosan DX140LC excavator is JimCurtin, owner of Jim Curtin Excavating.
Swiderski Equipment hosted a demoopen house for guests to operateDoosan construction equipment,
including excavators (track and wheeled),wheel loaders and various attachments, onAug. 5 at its Mosinee, Wis., facility. Attendees experienced hands-on prod-
uct testing with various pieces available tomaneuver, dig, and dump, experiencingfirst-hand the durability and comfort ofthese machines. Doosan experts were onsite to assist guests and answer any ques-tions. Food and refreshments were pro-vided.The equipment Swiderski had to run
and on display is as follows:• DX63-3 Midi excavator• DX140LC excavator• DX180LC excavator• DX225LC-3 excavator• DX235LCR excavator• DX350LC-3 excavator• DX190W-3 wheel excavator• DL420-3 wheel loader• DL300HL high lift wheel loader• DL250TC-3 tool carrier loader• DL200-3 HL high lift wheel loader(This story also can be found on
Construction Equipment Guide’s Web siteat www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 13
JD 2112C Scraper Pan,#U12244 ..........$79,000
JD 600CLC w/ GenesisGXP1200R Shear,#U10798 ........$468,000
NPK Hammers, AllSizes for All Makes.Inspected and WellMaintained, GH4-GH18
JD 210CW, 2 PieceBoom, Aux Hyd,#U11722 ........$148,000
Bomag BW213PDH,84” Padfoot, Blade,#U11363 ..........$59,000
Case STX550 ScraperTractor, #U12066................................$254,000
JD 350DLC, 10’6" Arm,32" Pads, #U12202 ............................$185,000
Low Hour JD 844K’sAvailable, 0% for 36
Months on Select Units
JD 350GLC MaterialHandler, #N5539 ................................$495,000
JD 850K LGP, 36"Pads, 168" PAT Blade,460 hours, #U11976............................$345,000
JD 850K, 24" Pads,128" Blade, 1494 hours,#U11857 ........$268,000
Fiat HD21, Side Boom,Excellent Condition, 3 Available $83,500 Ea.
JD 400D, New KLEIN8000 gallon water truck,6457 hrs, #U11425..............................$258,000
JD 310SJ, Cab, Air,4x4, Ext Hoe, #U11935........................$69,500
JD 700K, LGP, 30”Pads,132” PAT Blade,Warranty, #U12196 ............................$163,000
Page 14 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
see EXPO page 36
LICA Hosts First Nebraska Construction Expo & Field Day
(L-R): Patty Hooker, Linda Pruss, Patti McArdle, Jerry Biuso (National LICA CEO), CaseyPruss, and Nancy Dvorak represent LICA at the expo.
(L-R): The NCS Equipment booth had Terex Regional Manager TomHaroldson; Mitch Hahn, Bertrand, Neb.; Ben Zegers, Lincoln, Neb.; andDevin Benson, Bertrand, Neb., with a Terex PT 75 compact track loader.
Murphy Tractor and Topcon special-ists show attendees the features ofGPS grading system on this JohnDeere 700K dozer.
Titan Machinery’s Josh Johnson (L),out of the Lincoln, Neb., location withLoren Neujahr of Neujahr Farms outof Waverly, Iowa, inside a Case CX210C excavator.
(L-R): Celebrating 50 years, Rexco Equipment shows attendees itsextensive equipment lines with Galen Harvey, service manager;Casey Smith, general manager; Kelly Smith, territory manager; TomNugent, president; and Rod Osterhout, regional manager of Link-Belt, Midwest region.
Derek Drew (L) of Sitech Omahashows how the Trimble dual GPS605900 system works on this CatD6T dozer to Camden ExcavatingOwner John Camden of Blair, Neb.
The first annual Nebraska Construction Expo & Field Day held onJuly 31 was a great success for the Nebraska LICA chapter. Thisevent was open to the public and nearly 400 attendees were wel-
comed to the 40 acre site by volunteers and 28 sponsors that displayed lit-erature, machinery, and other equipment related to land construction activ-ities. The attendees included area contractors, NRCS, local chapter members
as well as the LICA National President Bob Clark, Vice President SteveAnderson, and CEO Jerry Biuso Sr. More than 40 pieces of large machinery were on display at the site
including tiling machines, dozers, backhoes, motorgraders, excavators,mini-excavators, skid loaders, a side dump trailer and more. Several ofthese machines were equipped with GPS technology and constructed mul-tiple terrace systems. Other activities at the site included tree removal and
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 15
(262) 781-3770
SEE PHOTOS OF OUR COMPLETE INVENTORY AT WWW.ARINGEQUIPMENT.COM13001 W. Silver Spring Drive
Butler, WI 53007
Jim KingMobile: (414) 530-0592
Fax: (262) 781-5053Email: [email protected]
WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL BREK ZORTMAN (414) 750-3351 FOR MORE INFO.
2009 Volvo L60F, Cab, A/C, Radio w/CD, Heated SuspensionSeat, Work Lights, 3rd & 4th Functions, Boom Suspension,Hyd. Attachment Bracket, Reversible Cooling Fan, Engine BlockHeater, Dymax 4cy High Tip Bucket w/BOE, 20.5R25 Tires –Front 0% (Solid) / Rear 10% (Air Filled w/Sealant) ....$65,000
2012 Volvo ECR88, 82.7” Dipper w/Thumb Bracket, 18”Rubber Tracks, Auto Idling, Pilot Controls, Heat/AC, RotatingBeacon, Counterweight..............................................$105,000
2012 Volvo ECR58, 16” Rubber Tracks, Auto Idling, Heat/AC,Pilot Controls, Counterweight ......................................$65,000
2013 Volvo L90G, Camera w/Color LCD Monitor, SlidingWindow Operator's Door, Halogen Work Lights Front/Rear,Boom Suspension, Hydraulic Attachment Bracket, ReversibleCooling Fan, Reverse Alarm, Rotating Warning Beacon, RearFrame Cover Plates, Front Frame Footsteps, Full Rear Fenders,CareTrack System, 104" 3.5cy Bucket w/BOE, 20.5R25 MIXHA2 L-3 Tires, Volvo D6H (Tier 4i) Engine ..................CALL
2013 Volvo BL70B, Municipal trade, 92.5" loader bucket,mech. att. bracket, 1.3 CY GP bucket w/ spill guard, EXT dip-per arm, pilot controls,4WD, A/C, radio w/CD, MP3 connection,double battery, boom suspension, additional 1080lb counter-weight ..........................................................................$89,500
2012 Dressta TD25M, 26" Severe Service Pads, 90% UC,Hydraulic Controls (3 Spool Valve / 2 Lever), Severe ServiceCrankcase & Transmission Guards, Final Drive Rock Guard,Full Length Track Roller Guard, Engine Block Heater,Start/Charging Receptacle Plug Assembly w/15' Cable, Semi-U Blade (12.5cy) w/Reinforced Center Push Plate & HydraulicTllt, Fixed Drawbar ....................................................$292,500
2008 Volvo A40E - A/C, Radio w/CD, Air Suspension Seatw/Armrest, Front Work Lights, Elec Hood Opener, DelayedEngine Shutdown, 29.5R25 Tires ..............................$288,000
2011 Volvo L220G, A/C, Radio w/CD, Heated Air Susp Seat,Rear Camera, Electro-Hydraulic Servo Controls, OptiShift,Comfort Drive Control, Boom Suspension, Work Lights,Reversible Cooling Fan, Axle Oil Cooling, Engine Block Heater,Full Rear Fenders, Re-Handling Counterweight, CareTrackHardware, 134” 8.2cy STE Bkt w/BOE, 29.5R25 Michelin L-4Tires, Volvo D13H-F (Tier 4i) ..........................................CALL
2011 Volvo DD138HF - Back up alarm, infrared temp sensor,work lights, 328 gal water tank cap, operating weight 30,325lbs, vibrating frequency: 3200 vpm, vibration centrifugal force:21,840-42,260 lbs, 84" drum width ............................$160,500
2012 Volvo L150G, 26.R25 L3 VJT Bridgestone Tires, VolvoD13H-E Engine, Radiator, Reversible Cooling Fan, Rear ViewCamera, Engine Block Heater, Boom Suspension, RehandlingCounterweight, 126” 5.5cy GP STE Bucket w/BOE ..$265,000
2011 Volvo SD116DX, Work lights, flow divider, bolt on pad footshell, inside scrapper, universal scrapper, grill support installa-tion, operating weight 23,930 lbs, vib frequency 1,870-2,018vpm, vibration centrifugal force: 47,900-61,000 lbs, 84" drumwidth ..........................................................................$117,000
2012 Volvo BL70B, Municipal Trade, 92.5” Loader Bkt, Mech.Att. Bracket, 1.3 CY GP Bkt w/Spill Guard, EXT Dipper Arm, PilotControls, 4WD, A/C, Radio w/CD, MP3 Connection, DoubleBattery, Boom Suspension, Additional 1080lb Counterweight ........................................................................................$83,500
2012 Volvo L70G, MUNICIPAL TRADE, A/C, Radio w/CD,Heated Air Susp Operator's Seat, Rear Camera, BoomSuspension, Hydraulic 4 Functions, , Reversible Cooling Fan,CareTrack Satellite System w/3yr Subscription, 100" 3.1cyBucket w/BOE, 20.5R25 BR VJT L3 tires, Volvo D6H (Tier 4i)Engine ........................................................................$165,000
2013 Volvo EC250DL, Municipal trade, 19'9" boom, 11'10" arm,36" track pads, engine block heater, air susp seat w/heat, joy-stick 3 switch & 1 prop, climate control with a/c, radio w/cd, rearview camera, 2 pump double act. piping, quick fit piping, pilotpattern controls, straight travel pedal, caretrack ........$217,500
2011 Volvo DD70HF, Backup Alarm, Operating Weight 14,895Lbs, 205 Gallon Water Tank Capacity, Vibration Frequency:4000 VPM, Vibration Centrifugal Force: 7,820-21,080 Lbs, 57”Drum Width ................................................................$106,000
2002 Hitachi ZX330 LC, A/C, Radio, Lubecore Auto GreaseSystem, 36" Pads, 39'8" Boom, 30'9" Stick, 60" DitchingBucket ..........................................................................$92,500
Page 16 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 17
We make one of the broadest lines of construction, mining, road
building and material handling equipment in the world. All
T O U G H W O R L D . T O U G H E Q U I P M E N T.www.liugongna.com
D
EVERY JOB.EVERYWHERE.
MidWest Ready Mix & Equipment1405 East Highway 50 • Vermillion, SD 57069
605-638-0897www.buyaloader.com
Page 18 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Scores of Contractors Tackle Ohio River Bridges ProjectsAs one of the largest construc-
tion jobs currently under way inthe United States, the combinedLouisville-Southern Indiana OhioRiver Bridges projects are employ-ing scores of contractors, each con-tributing their unique skills towardovercoming the many challengingaspects encountered on the job. The projects, primarily consist-
ing of two river crossings connect-ing Kentucky and Indiana involv-ing the participation of both states,are designed to improve safety andtraffic conditions and promote eco-nomic development in the area.Kentucky is responsible for theDowntown Crossing and Indianais responsible for the East EndCrossing. The cost of the projectsis expected to total approximately$2.5 billion and will be the largesttransportation project ever con-structed between the two states.Construction on the Downtown
Crossing began in the summer of2013 and is scheduled for comple-tion in late 2016. The bridge proj-ect involves the construction of sixI-65 northbound lanes and therehabilitation of the KennedyBridge’s six I-65 southboundlanes. As well as the bridges them-selves, the job includes roadwayand bridge approaches along witha reconfiguration of SpaghettiJunction, where I-64, I-65 & I-71merge in Louisville.Under review and the subject of
heated debate for nearly 30 years,the East End Crossing will connectLouisville’s East End with Utica,Ind. The conflict resulted out ofconcerns regarding the proximityof the project to Louisville’sDrumanard Estate, listed in theNational Register of HistoricPlaces, as well as homeownerswhose properties would be nega-tively impacted. As designed, thecrossing will feature a cable-stayedbridge accessed on the Kentuckyside via a 2,000 ft. (619 m) tunnelunder Louisville’s historic areas.In essence, the entire East End
Crossing project hinged on the tun-nel. Recognized for its expertise indrilling and blasting, localLouisville contractor HTAEnterprises was called in for sitedevelopment work on the tunnelapproach. Founded in 1986, HTAEnterprises Incorporated is aminority-owned and operatedbusiness. The company, headed by
owners, Harold E. Valentine (pres-ident) and Nancy Cole-Allen(vice-president) started out per-forming QC testing, utilities andsite development but in 1991began specializing in drilling andblasting work. For the East End Crossing proj-
ect, HTA was tasked with remov-ing 1.2 million yd. of limestone toclear the way for the tunnel andbridge approaches on both theKentucky and Indiana sides. TheKentucky side required an 82 ft.(25 m) tunnel face. Most of therock will be reused on the job.Given the logistics, the compa-
ny faced two primary challengeson the job site; first, traffic, andsecond, the unique operatingrequirements as a consequence ofthe site location. Because of thehistorical structure and residentialarea in which they were working,imposed vibration and blastinglimitations have significantlyimpacted production. According toHTA Enterprises’s Nancy Cole-Allen, the special technical provi-sions on the job are 75 percentmore stringent than industry stan-dards. In lieu of pre-splitting onwalls, the company used a linedrilling technique with drill spac-ing of 15 in. (38 cm) apart.Vibration was also held to .2 in. (.5cm) per second as opposed to thestandard .5 in. (1.27 cm) per sec-ond. Cole-Allen was joined by herdaughter, Project Manager KristieAllen in enthusiastically endorsingthe use of Furukawa Rock Drills,supplied by Louisville basedConstruction MachineryCompany, for the job.The company is using five
Furukawa HCR1500 rock drills onthe Kentucky side and twoFurukawa HCR 1500 rock drillsand two HCR900 rock drills on theIndiana side of the project. Cole-Allen said that HTA Enterpriseshas been running Furukawa rockdrills since they came out in theearly 1990s, finding them to be themost versatile and reliable rockdrills available. She said thatthey’re great production drills andextremely user friendly. HTA ownsone Furukawa rock drill with morethan 10,000 hours that is still inoperation, added Cole-Allen. Kristie Allen added that the
company’s operators appreciate
Because of the historical structure and residential area in which they were working, imposed vibra-tion and blasting limitations have significantly impacted production.
(L-R): Cole Asher of CMC with Nancy Allen, Harold Valentine and Kristie Allen of HTA Enterprises. see OHIO page 68
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 19
2004 Komatsu PC200LC-7: #81536, Cab/AC,31.5” Tracks, 9’ 7” Arm, Hyd Thumb, 4,800 hrs....................................................................$119,500
2001 Komatsu PC300LC-6: #91913, Cab/AC, 13’Arm, JRB QC, 10,550 hrs ........................$69,500
2004 Komatsu PC220LC-7: #91952, Cab/AC,31.5” Tracks, 11’ 6” Arm, QC, Aux Hyd, 7,600 hrs..................................................................$99,500
2007 Komatsu PC138USLC-2E0: #82142, Cab/AC,Roadliners, Hyd Thumb, 3,100 hrs ..........$89,500
2001 Komatsu PC138US-2: #80876, Cab/AC, 20”Tracks, 8’ 6” Arm, 4,500 hrs ....................$59,500
2007 Komatsu PC78MR-6: #81694, Cab/AC,Rubber Tracks, Blade, Aux Hyd, 3,650 hrs$54,500
2000 Komatsu PC78US-5: #82107, Cab, 17.5”Tracks, 5’ Arm, 6,100 hrs ........................$39,500
2007 Komatsu PC300LC-8: #81926, Cab/AC, 10’Arm, Rear Camera, 6,800 hrs ................$149,500
2002 Komatsu PC95R-2: #50051, Cab/Heat, 20”Tracks, Aux Hyd, Blade, 1,850 hrs ..........$69,500
2004 Komatsu PC160LC-7: #81899, Cab/AC, AuxHyd, 5,100 hrs ..........................................$84,500
2007 Komatsu PC220LC-8: #81987, Cab/AC, 28”Tracks, 10’ Arm, Hyd Thumb, 6,300 hrs$112,500
2005 Komatsu PC400LC-7: #92032, Cab/AC,35.5” Tracks, 11’ Arm, JRB QC, 10,450 hrs ............................................................................$98,500
Call Doug / Sam:
(866) 485-7180
Page 20 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Jarraff Displays Trimmer
Jarraff Industries displayed the Mini-Jarraff rear lot trimmer at the 2014 ISAInternational Conference & Trade Show inMilwaukee, Wis., Aug. 2 through 6. TheMini-Jarraff is specifically designed for resi-dential and municipal tree trimming.
A minimal footprint and compact profileallow the Mini-Jarraff to operate in areaswhere only climbing crews could go before.The self-leveling carrier allows it to travelon all types of terrain and eliminates the needfor traditional outriggers.
For more than 30 years Jarraff Industrieshas been providing utility, arbor, and linemaintenance contractors high quality, inno-vative equipment needed to safely and effi-ciently clear land and maintain utility right-of-ways. Jarraff Industries includes theJarraff all-terrain tree trimmer, Geo-Boybrush cutter tractor, and Mini-Jarraff rear lottrimmer.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Jarraff Industries displayed the Mini-Jarraff rear lot trimmer at the 2014 ISAInternational Conference & Trade Show in Milwaukee, Wis., Aug. 2 through 6.
For All Of Your Air Compressor Needs
Specializing in High Pressure Air200psi to 500psi
SIX LOCATIONS TO SERVE YOUHeadquarters Location:
901 Callendar Blvd Painesville, Ohio 44077
440-357-0800
Cleveland Branch: 9050 Bank Street
Valley View, Ohio 44125216-901-9200
Indianapolis Branch: 1401 S. Holt Road
Indianapolis, IN 46241317-381-6865
Cincinnati Branch: 9400 Le Saint Drive Fairfield, Ohio 45014
513-942-1488
Columbus Branch: 8200 B Memorial Drive Plain City, Ohio 43064
614-733-0777
Nashville Branch: 104 LaSalle Court
LaVergne, TN 37133615-630-2668
RENTAL • SERVICE • SALES
www.airequipmentrental.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 21
3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302
4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710
106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470
Mid Country Machinery(800) 206-5936
www.midcountrymachinery.com
2014 KOBELCO SK500 LC-9, EROPS, Heat, A/C, 2 hrs........................................................................$359,0002014 KOBELCO ED160, EROPS, A/C, Heat, 7 hrs ....................................................................................$CALL2014 KOBELCO SK85 SR, EROPS, A/C, 2 units ava ............................................................................$131,5202013 KOBELCO SK210 LC-9, EROPS, 3 Units aval. ............................................................................$163,5002013 KOBELCO SK260 LR-9, Long Reach, 439 hrs ............................................................................$243,0002013 KOBELCO SK295 LR-9, Long Reach, 245 hrs ............................................................................$238,5002013 KOBELCO SK230 SRLC, Aux Hyd., A/C, 531 hrs ........................................................................$162,0002013 KOBELCO SK140 SR, EROPS, Blade, Plumbed ..........................................................................$143,0002013 SANY SY215 C, EROPS, Heat, A/C, 102 hrs................................................................................$129,9002013 SANY SY135 C, EROPS, Aux Hyd, 2 Units aval.............................................................................$96,0002012 KOBELCO SK350LC-9, EROPS, 2 Units aval. ..............................................................................$245,0002012 KOMATSU PC220 LC-8, EROPS, Heat, 1062 hrs ............................................................................$CALL2011 CAT 336EL, EROPS, A/C, Heat, 2427 hrs ........................................................................................$CALL2007 KOBELCO SK250, EROPS, A/C, Heat, 4517 hrs ..........................................................................$120,0002007 KOBELCO SK350 LC-8, EROPS, A/C, Heat ..................................................................................$105,0002006 KOMATSU PC200 LC-8, EROPS, Thumb, 4235 hrs ......................................................................$74,5002006 HITACHI ZX160, EROPS, Thumb, A/C, 2974 hrs ..........................................................................$68,5002006 DEERE 230C LC, EROPS, QC, A/C, Autolube ................................................................................$85,0002006 KOBELCO SK115 SRDZ, EROPS, Blade, Thumb ..........................................................................$63,0002006 KOBELCO SK160 LC, EROPS, Heat, 6809 hrs ..............................................................................$49,5002005 KOBELCO SK210LC-6E, EROPS, Aux Hyd. 5880 hrs ....................................................................$78,0002005 KOBELCO SK250, EROPS, A/C, Heat, 4416 hrs ............................................................................$65,0002005 KOBELCO SK160 LC, EROPS, A/C, Heat, 2182 hrs ......................................................................$67,5002004 KOBELCO SK135 SR, EROPS, Heat, 5937 hrs ..............................................................................$39,5001996 KOBELCO SK150, EROPS, Heat, 4133 hrs ....................................................................................$42,500
2011 JCB 3C-14, EROPS, A/C, Heat, 874 hrs ........................................................................................$62,5002005 CAT 420DIT, EROPS, Heat, X-hoe, 5201 hrs ................................................................................$49,5001998 DEERE 310SE, EROPS, A/C, Heat, 6814 hrs ................................................................................$28,0001995 Case 580 Super L, EROPS, Heat, 9292 hrs ..................................................................................$21,5001989 Case 580 Super K, EROPS, 8735 hrs ..............................................................................................$CALL
2014 KOBELCO SK35 SR-5, OROPS, Push Blade ....................................................................................$CALL2013 KOBELCO 35 SR-5, EROPS, Heat, 2 Units aval. ............................................................................$41,0002013 KOBELCO SK35 SR-5, OROPS, Aux Hyd., 220 hrs ......................................................................$32,5002012 KOBELCO SK55 SR-5, EROPS, Aux Hyd, 235 hrs ........................................................................$59,0002012 KOBELCO SK55 SR-5, OROPS, Aux Hyd., 287 hrs ......................................................................$59,0002005 KOBELCO SK70 SR, EROPS, Plumbed, 2575 hrs ........................................................................$39,000
2012 BOMAG BW211 D-4, EROPS, A/C, 84” 184 hrs ............................................................................$83,5002010 VIBROMAX VM46 PD, OROPS, 55”Pad, 162 hrs ..........................................................................$46,5002010 CAT CD54, EROPS, 67” Smooth Double Drum ..........................................................................$105,0002008 CAT CP56, OROPS, 84” Pad Foot, 1249 hrs ................................................................................$89,0002008 CAT CP56, OROPS, 84” Pad Foot, 1255 hrs ................................................................................$87,0002007 CAT CP563 E, OROPS, Pad Foot, 84”, 1391 hrs ..........................................................................$84,0002007 DYNAPAC CA150 PD, OROPS, 66”, 228 hrs ................................................................................$55,0002007 DYNAPAC CA250 PD, OROPS, 84”, 2030 hrs ..............................................................................$57,5002006 CAT CP563E, OROPS, 84” Pad Foot, 6145 hrs ................................................................................$CALL2006 CAT CS533 E, OROPS, 84”, 2413 hrs ..........................................................................................$72,0002006 IR SD70 D, OROPS, Smooth Drum, 1354 hrs ..............................................................................$39,0002006 IR SD70 D, OROPS, Smooth Drum ..............................................................................................$39,0002005 BOMAG BW177 PDH-3, OROPS, Pad Foot, 1079 hrs ..................................................................$39,0002004 HYPAC C832 C, OROPS, 66” Pad Foot, 1386 hrs ........................................................................$33,5001998 HYPAC C850 C, OROPS, 84” Smooth Drum ....................................................................................$CALL1988 Case 602B, OROPS, Pad Foot..........................................................................................................$CALL
2014 KAWASAKI 70Z7, EROPS, Heat, A/C, 14 hrs ..............................................................................$204,0002013 KAWASAKI 95Z7, EROPS, A/C, Heat, 236 hrs ............................................................................$425,0002012 KAWASAKI 90Z7, EROPS, Ride Control, 841 hrs ........................................................................$265,0002013 CAT 924K, EROPS, A/C, Heat, QC ....................................................................................................$CALL2012 DEERE 624K, EROPS, A/C, Heat, 1083 hrs ................................................................................$149,5002011 KAWASAKI 65ZV-2, EROPS, A/C, Heat, 3662 hrs ............................................................................$CALL2011 CAT 928HZ, EROPS, Heat, A/C, 208 hrs......................................................................................$129,0002010 CAT 924H, EROPS, QC, Ride Control, 1233 hrs ..........................................................................$118,0002008 DEERE 544J, EROPS, Heat, A/C, 914 hrs....................................................................................$129,5002006 CAT IT38G, EROPS, Heat, A/C, 7817 hrs ......................................................................................$75,0002006 DEERE 644J, EROPS, A/C, Heat, 8262 hrs ......................................................................................$CALL2001 CAT 950G, EROPS, Heat, A/C, Ride Control ....................................................................................$CALL
2013 DEERE 750K XLT, EROPS, A/C, Heat ................................................................................................$CALL2012 CAT D8T, EROPS, 8SU Blade, Heat, A/C, 971 hrs ......................................................................$545,0002012 DEERE 850K WT, EROPS, Winch, Sweeps, 809 hrs....................................................................$285,0002011 CAT D6K, EROPS, A/C, Heat, 1647 hrs........................................................................................$170,0002010 DEERE 550J, EROPS, Draw Bar, 6way, 2602 hrs ..........................................................................$65,0002009 CAT D6T XW, EROPS, SU Blade, Heat, 4571 hrs ........................................................................$215,0002008 CAT D6T XW, EROPS, SU Blade, ripper, 3580 hrs ......................................................................$212,5002008 CAT D6T XL, EROPS, SU Blade, A/C, 4653 hrs ..........................................................................$186,5002008 CAT D6T LGP, EROPS, Aux Hyd., A/C,4487 hrs ..........................................................................$190,0002008 CAT D6T XL, EROPS, SU Blade, 4377 hrs ..................................................................................$195,0002008 KOMATSU D65EX-15EO, EROPS, Winch, 4927 hrs ....................................................................$119,5002007 CAT D6T LGP, EROPS, A/C, Heat, 1911 hrs ....................................................................................$CALL2007 DEERE 850J LGP, EROPS, A/C, Heat, 5753 hrs ..............................................................................$CALL2006 CAT D6R XLIII, EROPS, 6 way, Sweeps, 6568 hrs ......................................................................$142,5002006 DEERE 550J LGP, OROPS, 6 way, 3294 hrs..................................................................................$43,0002005 CAT D6R XLII, EROPS, SU Blade, A/C, 7547 hrs ........................................................................$123,5002005 CAT D6R XWII, EROPS, Aux Hyd., 8361 hrs ..............................................................................$130,0002005 DEERE 650J, OROPS, 6 way, 1473 hrs ........................................................................................$55,0002005 DEERE 450J LGP, OROPS, 6way, 3916 hrs ..................................................................................$43,5002004 CAT D6R XWII, EROPS, Heat, A/C, 12805 hrs ............................................................................$117,5002001 DEERE 650H, OROPS, PAT Blade, 7182 hrs ....................................................................................$CALL1987 CAT D6H, OROPS, SU Blade, 14439 hrs ......................................................................................$45,000
1988 Case 602B, OROPS, Pad Foot ..............................................................................$CALL
2012 JLG 600S, 4WD, Sky Power, DSL, 958 hrs ..................................................................................$86,5002012 JLG 340AJ, 4WD, DSL, 470 hrs ....................................................................................................$52,0002011 JLG 1500SJ, 4WD, Sky Power, 878 hrs ......................................................................................$240,0002009 JLG 400S, 4WD, Sky Power, 3308 hrs..........................................................................................$33,0002008 JLG 800S, 4WD, Sky Power, 1914 hrs..........................................................................................$83,0002007 JLG 800AJ, 4WD, DSL, 2251 hrs ..................................................................................................$76,6002005 JLG 1200SJP, 4WD, DSL, 2145 hrs ............................................................................................$109,0002005 JLG 600S, 4WD, Sky Power, 2319 hrs..........................................................................................$55,0002005 JLG 450AJ, 4WD, DSL, 1729 hrs ..................................................................................................$37,0002005 JLG 450A, 4WD, DSL, 2681 hrs....................................................................................................$29,5002003 JLG 800S, 4WD, 80’ reach, 3558 hrs ..........................................................................................$46,000
2013 SKYTRAK 10054, EROPS, FF Tires, 810Hr..................................................................................$118,0002013 SKYTRAK 8042, EROPS, FF Tires, 794 hrs ..................................................................................$86,5002013 SKYTRAK 8042, EROPS, FF Tires, 584 hrs ..................................................................................$85,0002012 SKYTRAK 8042, EROPS, FF Tires, 623 hrs ..................................................................................$83,5002012 SKYTRAK 10054, EROPS, FF Tires, 2034 hrs ............................................................................$102,5002007 SKYTRAK 8042, OROPS, FF Tires, 2588 hrs ................................................................................$55,0002006 GEHL DL10H-55, OROPS, 1574 hrs..............................................................................................$42,0002006 LULL 1044C-54, OROPS, Outriggers, 5425 hrs ............................................................................$49,0002006 SKYTRAK 8042, OROPS, FF Tires, 2373 hrs ................................................................................$55,0002006 SKYTRAK 6042, OROPS, 2445 hrs ..............................................................................................$41,5002005 SKYTRAK 6042, OROPS, 4x4, 2773 hrs ......................................................................................$42,0001996 LULL 644B-37, OROPS, Tilt Carriage, 6331 hrs............................................................................$19,500
EXCAVATORS WHEEL LOADERS
LOADER / BACKHOES
MINI EXCAVATORS
DOZERS
BOOMLIFTS
FORKLIFTS
COMPACTORS
2012 DEERE 850K WT, EROPS, 809 hrs. ....................$285,000 2011 Kawasaki 65ZV-2, EROPS, Heat, 3694 hrs...........$87,500 2011 CATERPILLAR 928H............................................$126,000
Page 22 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
JCB Announces Plans for New Entry Level Backhoe LoaderGlobal backhoe loader market leader JCB
announced plans to launch a new entry levelbackhoe loader which will be aimed at largefleet owners and rental customers around theworld.Initially aimed at the key North American
and Latin American markets, the new back-hoe will eventually be offered to other terri-tories including Europe, Russia and theMiddle East. With a number of unique sell-ing points, the new 3CX will go into pro-duction later this year at JCB’s Savannahplant in Georgia, increasing JCB backhoeproduction to four continents, with machinesalready manufactured in the UK, India andBrazil. JCB Chief Innovation and Growth Officer
Tim Burnhope said: “JCB is celebrating 60years of making backhoe loaders and 50years since we sold our first backhoe inNorth America. Over that time JCB’s prod-uct range has gone from strength to strengthand we have now been world market leaderfor 14 consecutive years. “Today we are delighted to announce
another exciting addition to that iconic rangewhich will strengthen our position. The JCBbackhoe loader is the most versatile machinein the world and the launch of today’s brandnew 3CX for rental and large fleet ownersoffers a very attractive product that mini-mizes ownership costs.“While the new machine will be aimed
initially at customers in North and SouthAmerica, we expect its appeal to be muchwider with other regions of the worldalready expressing a great interest in thisnew backhoe.“As the global market leader, JCB knows
what makes the best machines for the job.With the new 3CX, JCB has designed andbuilt a tough, economical backhoe loaderthat will appeal to the rental market, offeringmaximum productivity with the lowest run-ning costs, all backed by the reassurance ofthe dedicated JCB dealer network.”The new JCB 3CX for North America and
Latin America will offer a number of uniquefeatures for a machine in its class:• A stress relieved and reinforced excava-
tor end • Standard limited slip differential and
parallel lift • Standard stabilizer ram guards, internal
hose routings and highest ground clearanceto minimize damage• The highest hydraulic flow — up to 35
percent greater than other backhoes • Highest breakout forces — up to 45 per-
cent greater than other backhoes The 3CX also is powered by the highly
efficient TIV Final JCB Ecomax dieselengine, delivering a strong 74 hp (55 kW) ofpower with maximum economy. This
advanced engine meets the Tier IV Finalemissions standard without the need for anexpensive, complex diesel particulate filter(DPF), reducing maintenance costs for cus-tomers. At 400 Nm, it also has the highestengine torque compared to other machinesin this class.
Built to WorkThe 3CX has twin shovel cylinders and
the largest-in-class torsion box positionedclose to the loader bucket ensuring best-in-class breakout force and maximum visibilityfor the operator. The machine has a maxi-mum bucket breakout force of 13,603 lbfwith a 9.5 sq. ft. (.88 sq m) standard front GPbucket — up to 50 percent better than othermodels, according to the manufacturer.JCB’s 3CX offers a parallel lift loader
geometry as standard, ensuring maximumload retention with added visibility to thebucket. This also provides increased controlwhen used with pallet forks, improving pro-ductivity. Likewise, a standard return-to-digsetting delivers efficient operation in repeti-tive loading tasks, allowing the operator toconcentrate on maneuvering the machine asthe bucket is lowered. Loader arm floatmakes grading and site clearance easy too, asthe bucket follows the contours of theground.The stabilizer feet are reversible for added
versatility, with one surface for use onasphalt/concrete and the other designed foruse in the dirt.
The Business BackhoeWith a dig depth of 14 ft. (4.24 m), the
3CX has the reach for trench excavation.An optional extending dipper gives anextra 4 ft. (1.2 m) of reach. The extendingdipper locking pin is located at the bottomof the dipper arm, making it easy to accessfrom ground level, while all cylinders andhoses are concealed within the boom anddipper structure to minimize risk of dam-age and cost of repair, and to improve vis-ibility into the trench. All exposed hoses onthe excavator kingpost, are sheathed toprotect the operator in the event of a hoseburst.The backhoe durability is enhanced by
the use of keyhole castings, relieving stressat the end of the boom cylinder by distrib-uting cylinder forces through the corestructure of the boom. The main frame andrear frame form a fully welded unit to copewith some of the highest digging loads.Durability is further enhanced with heattreatment of the boom and the dipper, torelieve stress on the excavator end. In addi-tion, extra plating is fitted as standard onthe boom and dipper ends.
Economy and EfficiencyThe JCB Ecomax diesel engine has been
designed to achieve Tier IV Final emis-sions standards through efficient combus-tion, the use of second generation commonrail fuel injection technology, cooledexhaust gas recirculation (EGR) and
sophisticated electronic control. Ecomaxengines do not require a costly, hard topackage DPF, reducing maintenance forcustomers and cutting operating costs.With a transmission and axles designed
and built by JCB, the 3CX benefits fromtotal component integration, with each partspecifically designed for use in a backhoeloader. The high specification includes alimited slip differential as standard, to pro-vide maximum traction in difficult siteconditions. At 38 gpm (144 Lpm), themachine also offers a far higher hydraulicflow than its competitors.
Operation and MaintenanceWith its wide cab, the 3CX boasts an
enhanced view to the loader, due in part toa low hood line and narrow and four-ramgeometry loader arm design. Ergonomicstyling ensures that the operator remainscomfortable and fatigue-free throughoutthe working day, increasing productivity,according to the manufacturer.There is plenty of in-cab storage for the
operator, providing safe and secure loca-tion for equipment and belongings. Therear-opening, one-piece hood provideseasy access to the engine for more in-depthservice and maintenance work.For more information, visit
www.jcb.com. (This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Initially aimed at the key North American and Latin American markets, the new backhoe will eventually be offered to otherterritories including Europe, Russia and the Middle East.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 23
SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL
• No tools required• No expensive
hardware needed• No more rags
stuffed into hoses• No more messy
plastic caps• The ultimate
contamination control tool• One hand installation• Eliminate hydraulic
oil spills & clean up• Quick installation
& ease of usage• Safe for personnel
& environment• Industry acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
WE STAND READY.
e decision makerse arWts Specialistsarax PtrNor
ou up and running and prye line of qualitensivtxe
all makes when y
oblem solve pre arW. e decision makerse only one goal ve haW. ts Specialists
trt Nor. Ao�tableou up and running and premanufacy new and re line of qualit
e the people tve haWou need them. all makes when y
our e ye arW. ersoblem solve only one goal — o keep t
e an ve haax, wtror ts f for ed parturemanufacoe the people t
W. eedcou suchelp y
, WIshlandA715.682.5522 715.693.3820
. eadye stand rW
, WIMosinee715.693.3820
, MNapidsand RrG218.326.9427
Y, KichmondR859.623.2030
trom/Nor.cebookfac
, WIallsFa hippewC715.834.2924
, WIoMonic715.487.5583
218.722.7456
218.759.1996
ncaxItr
uluth, MND218.722.7456
emidji, MNB218.759.1996
anaba, MIEsc906.789.9054
Y, KouisvilleL502.253.3721
Yeen, Krwling GoB
270.842.3400
Yondon, KL606.862.8447
Page 24 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
YOUR VISION. BUILT TO SPEC.
eeo sy tsas e’tI oYYo
bs aaedr iaely cttere pvau h
eeu not ynempiuqe et thuob
o . Sdeeccuo sd te
.eeo sy tsas etI oYYos a bm aed these uw
un ot onecre0 pby 1d fn, anrettap-, HOSIekooe h. Wpukooh
bs aaedr iaely cttere pvau hs CeireS-r Eur oot fnirpeuls a b
u wo. Y Yosledoe mmarf-egrar lun ootipn os as alotrnot cood fe, seron mraeo l. T To lpu uod y
eeu not ynempiuqe et thuobu wo. Y Yosredaok Lcart Tcapmos C
slotrnoe clbahctiwd setnau wd eetnau wo. Y Yosledol mln an oer wut oisir vr oelaer duoe y
o . Sdeeccuo sd tet ooe frod metnau w
elbatceler seffe o. Wst nemhcattr aeisad e
.etisbe
Scharber & SonsRogers, MN
763-428-4107
Isanti County EquipmentIsanti, MN
Jesse Kraft763-444-8873
www.mnequipmentsolutions.com
RDO Equipment Co.
Ryan MillerBurnsville, MN952-890-8602
Chris ConradRochester
507-282-8888
www.rdoequipment.com
0% for 48 Months*
Expires 8/31/14
*Offer ends 8/31/14. Some restrictions apply; other special rates and terms may be available, so see your dealer for detailsand other financing options. Subject toapproved credit with John Deere Financial.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 25
No Agreement On How to Payfor Roads Among TaxpayersBy Joan Lowy and Jennifer AgiestaASSOCIATED PRESS
WASHINGTON (AP) Small wonderCongress has kept federal highway and tran-sit programs teetering on the edge of insol-vency for years, unable to find a politicallyacceptable long-term source of funds. Thepublic can’t make up its mind on how to payfor them either. Six in 10 Americans think the economic
benefits of good highways, railroads andairports outweigh the cost to taxpayers. Yetthere is scant support for some of the mostfrequently discussed options for paying forconstruction of new roads or the upkeep ofexisting ones, according to a newAssociated Press-GfK poll. Among those who drive places multiple
times per week, 62 percent say the benefitsoutweigh the costs. Among those who driveless than once a week or not at all, 55 per-cent say the costs of road improvement areworthwhile. Yet a majority of all Americans — 58 per-
cent — oppose raising federal gasolinetaxes to fund transportation projects such asthe repair, replacement or expansion ofroads and bridges. Only 14 percent supportan increase. And by a better than 2-to-1 mar-gin, Americans oppose having private com-panies pay for construction of new roadsand bridges in exchange for the right tocharge tolls. Moving to a usage tax based onhow many miles a vehicle drives also drawsmore opposition than support — 40 percentoppose it, while 20 percent support it. Support for shifting more responsibility
for paying for such projects to state andlocal government is a tepid 30 percent. “Congress is actually reflecting what peo-
ple want,’’ said Joshua Schank, presidentand CEO of the Eno Center forTransportation, a transportation think tank.“People want to have a federal [transporta-tion] program and they don’t want to pay forit.’’ Congress recently cobbled together $10.8
billion to keep transportation aid flowing tostates by changing how employers fundworker pension programs, extending cus-toms user fees and transferring money froma fund to repair leaking underground fuelstorage tanks. The money was needed tomake up a shortfall between aid promised tostates and revenue raised by the federal 18.4cents-per-gallon gas tax and the 24.4 cents-per-gallon diesel tax, which haven’t beenincreased in more than 20 years. It’s the fifth time in the last six years that
Congress has patched a hole in the federalHighway Trust Fund that pays for highwayand transit aid. Each time it gets more diffi-cult for lawmakers to find the money with-out increasing the federal budget deficit.Critics described the pension funding
changes used this time as budget gimmicksthat would cost the government more in thelong run and undermine employee pensionprograms. The latest patch cleared Congress about
three hours before midnight July 31, the daybefore the Transportation Department said itwould begin cutting back aid payments tostates. The current fix is only expected tocover the revenue gap through next May,when Congress will be back where it startedunless lawmakers act sooner. The most direct solution would be to raise
fuel taxes. That’s what three blue-ribbonfederal commissions have recommended.But opposition to a gas tax increase cutsacross party lines, although Republicans aremore apt to oppose an increase, 70 percent,than Democrats, 52 percent. “Every time we turn around there’s
another tax, and our gas taxes are so highnow,’’ said James Lane of Henry County inrural south-central Virginia, who describedhimself as leaning toward the GOP. Lane favors allowing companies to pay
for the construction of new or expandedroads and bridges in exchange for the rightto impose tolls on motorists, often for manydecades. There have been projects like thatin Virginia, but since those roads are in morepopulated areas of the state where he does-n’t drive it makes sense to have the peoplewho use them pay for them, he said. But Michael Murphy a data services con-
tractor who lives near San Antonio, Texas,where a high-speed public-private toll roadis scheduled to open this fall, said he’drather see gas taxes increased than tollsimposed on drivers. Roads benefit every-one, even if indirectly, so it’s only fair thateveryone who drives pays somethingtoward their cost, he said. A majority of those surveyed, 56 percent,
say traffic in the area where they live hasgotten worse in the last five years. Only 6percent say traffic has improved in theirarea, and 33 percent that it’s stayed aboutthe same. The AP-GfK Poll was conducted July 24
to 28 using KnowledgePanel, GfK’s proba-bility-based online panel designed to be rep-resentative of the U.S. population. Itinvolved online interviews with 1,044adults. It has a margin of sampling error ofplus or minus 3.4 percentage points for allrespondents, larger for subgroups. Respondents were first selected random-
ly using phone or mail survey methods, andwere later interviewed online. People select-ed for KnowledgePanel who didn’t other-wise have access to the Internet were pro-vided with the ability to access the Internetat no cost to them.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Page 26 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale$85
Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale..........$85
Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale ...... $85
Bobcat E35 Compact Excavator, 1:25 Scale ............................$50
Bobcat E55 Compact Excavator, 1:25 Scale ............................$60
Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ..................$25
Bobcat S510 Skid Steer Loader, 1:25 Scale..............................$65
Bobcat S530 Skid Steer Loader, 1:25 Scale..............................$65
Bobcat S550 Skid Steer Loader, 1:25 Scale..............................$65
Bobcat S570 Skid Steer Loader, 1:25 Scale..............................$65
Bobcat T770 Compact Track Loader, 1:25 Scale ....................$45
Bobcat 225 Compact Excavator, 1:25 Scale ............................$50
Case CX250C Excavator, 1:50 Scale ........................................$195
Case 95XT Skid Steer Loader (Conrad), 1:32 Scale ................$60
Case 580 ST Backhoe/Loader, 1:50 Scale ................................$95
Case 580K Backhoe/Loader, Conexpo 1987, 1:35 Scale ......$125
Case 1102 Vibromax Roller, 1:35 Scale....................................$100
Caterpillar CT660 Dump Truck, Yellow Cab, 1:50 Scale..........$80
Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,
1:50 Scale ......................................................................................$100
Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ............$65
Caterpillar D6K Track-Type Tractor, 1:50 Scale ........................$65
Caterpillar D7E Track-Type Tractor, 1:50 Scale ........................$90
Caterpillar D8L Track-Type Tractor (NZG 233), 1:50 Scale......$75
Caterpillar D8T Track-Type Tractor, 1:50 Scale ......................$110
Caterpillar D9N Track-Type Tractor (NZG 298), 1:50 Scale ....$75
Caterpillar D10N Track-Type Tractor, 1:50 Scale ......................$50
Caterpillar D10T Track-Type Tractor, 1:50 Scale ....................$100
Caterpillar D11R Track-Type Tractor, 1:50 Scale ....................$100
Caterpillar 323D L Excavator, 1:50 Scale ..................................$90
Caterpillar 336D L Excavator, 1:50 Scale ..................................$95
Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..........$50
Caterpillar 365B L Series II Excavator, 1:50 Scale....................$75
Caterpillar 416B Backhoe/Loader (NZG 285), 1:50 Scale ......$70
Caterpillar 428 Backhoe/Loader (NZG 2851), 1:50 Scale ........$70
Caterpillar 631E Motor Scraper, 1:50 Scale ..............................$50
Caterpillar 740B EJ Articulated Dump Truck w/ Ejector Body,
1:50 Scale ........................................................................................$70
Caterpillar 775G Off-Highway Truck, 1:50 Scale ....................$110
Caterpillar 963D Track Loader, 1:50 Scale ................................$60
Caterpillar 966K Wheel Loader, 1:50 Scale................................$95
Caterpillar 977 Traxcavator, 1:50 Scale ......................................$60
Caterpillar 988K w/ Grapple, 1:50 Scale ..................................$160
Doosan Moxy MT31 Articulated Truck ....................................$100
Hamm 3307 Compact Roller, 1:34 Scale....................................$45
Hamm 3414 Pad Foot Compactor, 1:50 Scale ..........................$90
International 175 Crawler Loader, 4in1, 1:50 Scale..................$65
International 560 Pay Loader, 1:25 Scale ................................$145
International TD-15 Dozer w/Umbrella, 1:50 Scale ..................$60
International Red Forestry TD-15 w/Umbrella, 1:50 Scale......$60
International TD-20E Dozer, 1:64 Scale ......................................$24
JCB 3CX Backhoe/Loader, 1:50 Scale........................................$75
John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ......$70
John Deere 200C LC Excavator, 1:50 Scale..............................$45
John Deere 315SJ Backhoe/Loader, 1:50 Scale ......................$45
John Deere 624J Military Wheel Loader, 1:50 Scale................$40
John Deere 772CH Motor Grader, 1:50 Scale ..........................$45
John Deere 850C Dozer, 1:50 Scale............................................$40
John Deere 850K Dozer, 1:50 Scale............................................$65
Komatsu CK25 Compact Track Loader, 1:50 Scale ................$45
Komatsu D51 PX Dozer, 1:50 Scale ............................................$85
Komatsu D51 EX Dozer, 1:50 Scale ............................................$85
Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ......................$80
Komatsu D65PX-17 Dozer, 1:50 Scale........................................$80
Komatsu D375 A Dozer, 1:50 Scale ..........................................$125
Komatsu GD655 Motor Grader, 1:50 Scale................................$90
Komatsu HD605 Off-Highway Truck, 1:50 Scale ......................$80
Komatsu HM250 Articulated Dump Truck, 1:50 Scale ............$75
Komatsu HM400-3 Articulated Truck, 1:50 Scale ..................$100
Komatsu WA500 Wheel Loader, 1:50 Scale ..............................$80
Komatsu WB146 Backhoe/Loader, 1:50 Scale ........................$75
Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ......$90
Kubota KX91-2 Compact Excavator, 1:25 Scale ......................$60
Leeboy 8816 Asphalt Paver, 1:50 Scale ....................................$90
Link Belt 210X3 Excavator, 1:50 Scale ......................................$45
Link Belt 800 X2 Excavator, 1:50 Scale....................................$200
Northwest 25D Shovel, 1:50 Scale ..............................................$75
Vogele MT3000 Powerfeeder, 1:50 Scale ................................$140
Vogele Super 700 Small Paver, 1:50 Scale ................................$80
Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ....................$115
Volvo EC220D Excavator, 1:50 Scale........................................$115
Volvo L220G Wheel Loader, 1:50 Scale ..................................$120
Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale........................$90
Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale......$145
Wirtgen W250i Cold Milling Machine, 1:50 Scale ..................$160
Shipping and Handling Included
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – [email protected]
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Vogele 1900-2 Tracked Paver, 1:50 Scale $140Komatsu PC360LC-10 Excavator, 1:50 Scale $90Caterpillar CT660 Day Cab Tractor w/ Trail KingLowboy Trailer, 1:50 Scale $100
Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 27
JCB’S ’14 Mud Run & Dig TheRide Raises More Than $100K
More than 2,000 runners, riders and spec-tators got “down and dirty” at JCB’s thirdannual Mud Run and first-ever Dig the Ridecycling event at the company’s NorthAmerican Headquarters in Savannah, Ga.Proceeds from both races benefit The LadyBamford Center for Early ChildhoodDevelopment. In a check presentation ceremony July
22, Thom Peebles, vice president of market-ing at JCB, presented a check for $100,500to Tammy Mixon, the executive director ofWesley Center, which operates The LadyBamford Center. Also on hand to participatein the ceremony were: Steve Vernon, vicepresident of finance of JCB; Debi Mulanax,chief financial officer of the Lady BamfordCenter advisory board; and David Paddison,Lady Bamford Center board member andboard chair of The Mud Run/Dig the Ride. This year’s donation, made possible by
race participants and JCB’s generous spon-sors, will go a long way towards continuingto support The Lady Bamford Center and itseducational mission. “Months ago, as we began planning for
this year’s Mud Run, we knew we wanted itto be the biggest and best one yet,” saidThom Peebles, vice president of marketingof JCB North America. “Along the way, wecame up with the idea of adding a cyclingevent, and that’s how Dig the Ride wasborn. Our staff made sure that both racecourses featured twists and turns that madethem fun and challenging for both runnersand cyclists. However, most importantly, wewere able to exceed previous years’ goals byraising more than $100,000 for The LadyBamford Center. We sincerely thank ourparticipants, volunteers, generous sponsorsand spectators who made it all possible.”
2014 Mud Run JCB’s Mud Run consisted of teams of
two making their way through a sloppy,messy 5-mi. course spread across JCB’ssprawling 1,000-acre campus. Runnerssplashed through a lake and traveled down
numerous trails featuring obstacles that test-ed both their endurance and their ability toget dirty.
2014 Dig the Ride For the first time in 2014, JCB added to
the Mud Run fun by adding an all-terraincycling event, Dig the Ride. Cyclists rode a5-mi. XC Course complete with limbs,drops, bridges, berms, speed-oriented pass-ing stretches and light obstacles. The race featured three levels of competi-
tion for riders aged 17 and up, with noviceriders taking one lap of the course (5 mi.),intermediate riders tackled the course twice(10 mi.) and advanced riders pedaledaround the course three times (15 mi.).Racers aged 13 to 17 years old made up theyouth category, taking one lap of the coursewith optional bail-outs.
The Lady Bamford Center Operated by Wesley Community Centers
of Savannah, the Lady Bamford Center pro-vides education and social skills develop-ment to children from six weeks to five yearsof age. Located at 1410 Richard St. in westSavannah, the center offers priority admis-sion to children from homeless and low-income families, as well as children withphysical, mental or emotional challenges. Itsinteractive curriculum prepares young chil-dren for kindergarten and elementary schooland helps them compete with other childrenacademically.The Lady Bamford Center is accredited
by the National Association for theEducation of Young Children (NAEYC).Fewer than eight percent of all early child-hood centers in the United States receive thisprestigious honor.For more information, visit
jcbmudrun.com, www.digtheride.com orwww.wesleyctrs-savh.org/.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Steve Vernon, VPfinance, JCB, andThom Peebles, VPmarketing, JCB,present a check for$100,500 — the pro-ceeds from thisyear's Mud Run andDig the Ride — toThe Lady BamfordCenter childrenstaff and theExecutive Directorof Wesley Center,Tammy Mixon.
Portable Power
Call ASC Construction Equipment for Rental Rates at 701.250.4882
LSC LIGHT TOWER
• Kubota D1005bg Engine
• Tier 4 Final Emissions
• Water Cooling System
• 28 Gallon Diesel
Fuel System
• 6kW Prime Power Rating,
60Hz, 1.OPF
• 120 Available Voltage
Single Phase
Page 28 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Depth, Distance Challenges Setup of Concrete EquipmentConstruction of an iron ore collection pit
in Reynolds, Ind., required both ingenuityand the right equipment to continuouslypump concrete for its difficult-to-accessfoundation — located in a 100-ft. (30m)deep hole, 600 ft. (183 m) from the edge ofan excavation. Overcoming the depth anddistance, the unusual setup of fourPutzmeister truck-mounted concrete boompumps solved the concrete placing dilemmafor owner Magnetation, LLC.Magnetation Inc., a specialty iron ore
mining company based in Grand Rapids,Minn., utilizes specialized magnetic separa-tion technology to capture iron ore particlesleft over from abandoned mining operationsthat existed on the iron range dating back tothe 1890s. After ore extraction, the companyleaves behind ecologically functioning land-forms.To further expand its operations,
Magnetation formed a joint venture with AKSteel Corporation of West Chester, Ohio, tobuild a $350 million Mag Pellet plant inReynolds, Ind. Once the plant is operational,iron ore concentrate will be transported fromMagnetation’s mineral recovery operationsin Minnesota to the new Reynolds plant toproduce iron ore pellets, a critical raw mate-rial in the steelmaking process. The pelletswill then be sent to AK Steel’s blast furnaceoperations in Ohio and Kentucky.
Up to the ChallengeWork on the large-scale project started in
March 2013, with completion expected byfourth quarter 2014. This short time framemeans crews at the one-sq. mi. site are work-ing under a fast track schedule to constructthe plant, which includes numerous build-ings and operations specific to a railway sys-tem and the production of iron ore pellets.Among these is a rotary rail dump pit whererail cars will be literally turned upside downto empty raw materials into a collection pit— a pit that began with 345,000 cu. yds.(263,771 cu m) of dirt excavated to create it.The pit was unusual and so was the
approach in placing concrete for its 15,000sq. ft. (1,393 sq m) foundation. Its demand-ing logistics would test Northwest Ind.-based Masterlink Concrete Pumping LLC todevelop a master plan for setup of concreteboom pumps and delivery system that wouldreach the farthest point of the mat pour, in adeep hole, a distance the length of two foot-ball fields.Masterlink was ready for the challenge.
The company had recently doubled its fleetsize when acquiring the assets of Plymouth,Ind.-based Concrete Pumping of Michianain April 2013. This was a major expansionfor Masterlink, a company established in2004 by Steve Slater and partners. Slater wasexperienced in the solid waste industry, but
had never operated a concrete pump before. However, seeing a need for concrete
pumping services in his region, Slaterresearched the market and thoroughly inves-tigated concrete pump brands.Consequently, the business was started 10years ago with three Putzmeister boompumps, a 32Z-Meter and two 38Z-Meters.The business grew, and today, Slater, nowalso proficient in operating a pump, has twoIndiana locations — Portage and Plymouth— along with a dozen machines that includePutzmeister boom pumps, Telebelt convey-ors and a Thom-Katt trailer pump.“Our ability to provide more concrete
pumps, of different sizes, and all of themwith the high quality Putzmeister namehelped us earn a project of this large size,”said George Slater, assistant general manag-er at Masterlink. “With the addition of equip-ment, we could handle this major job as wellas service our regular customers.”
A Strategic SetupAfter strategic meetings to establish the
most effective way to place concrete for thelogistically challenging pour, a master planwas finalized. “Because of the pour’s complexity, we
were at the job site to set up about six hoursbefore the first load of concrete arrived,”said Slater.
Two boom pumps set up near the edge of an excavation to handle all the pumping.As concrete was discharged into a boom pump’s hopper, it bypassed the boom andwent directly through 400 ft. (122 m) of delivery line that traveled down a steepincline.
Masterlink set up four truck-mounted concrete boom pumps and 800 ft. (244 m) ofdelivery line in a unique arrangement to pump 3,000 cu. yds. (2,293 cu m) of con-crete non-stop for 20 hours.
The two larger boom pumps on the plat-form used their booms to place con-crete from all areas of the pour withoutneeding additional delivery line.
see CONCRETE page 30
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 29
Page 30 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Foundation of Iron Core Collection Pit Proves ChallengingThe setup included a
Putzmeister 32Z- and 38Z-Metertruck-mounted boom pump situat-ed near the edge of the excavationto handle the pumping. Thepump’s hoppers, one facing north,one south, allowed mixer truckseasy access and less congestionfrom two separate discharge loca-tions. Once concrete was dis-charged into a boom pump hopper,it bypassed the boom and wentdirectly into 400 ft. (122 m) of 5 in.(12.5 cm) delivery line. A pair of delivery lines ran par-
allel to each other while travelingdown a dirt ramp with a sharp 24percent slope. Days prior, anchorpoints, consisting of holes filledwith concrete and a hook, werelocated every 100 ft. on the inclineto securely hold the system inplace.Each delivery line connected to
the boom pipe of a 47Z- or 52Z-Meter, which were set up on a spe-cially created platform, a key com-ponent to the setup plan. The plat-form was formed near the bottomof the hole and compacted with dirtand gravel. To access it, the twoboom pumps had to be wincheddown the extremely steep ramp viacable hooked to a bulldozer. Although the two larger con-
crete pumps were needed for theirlong boom reaches up to 170 ft. (52m), their compact outriggersallowed setup on the tight 50-by-80 ft. (15 by 24 m) platform, andalso maintained a safe distancefrom its edge. Once set up, theunits extended their booms toeffectively access all areas of the100-by-150 ft. (30.5 by 46 m)foundation without additionaldelivery hose, further realizinggreater job site efficiency. A rotating crew of 10 boom
pump operators pumped 3,000 cu.yds. (2,293 cu m) of concrete non-stop for 20 hours, placing the mixto a 6 ft. (1.8 m) thickness.Although a 32Z-Meter also was onsite as backup, it was not needed asno technical issues were encoun-tered.
Right on the MixFor the mix design, concrete
supplier Irving Materials Inc. (IMI)suggested a small coarse aggregatebecause flow-ability of the con-crete for such a long distance was
critical to pumping without inter-ruption. For the pour, IMI dis-patched the concrete from twobatch plants in Indiana: itsRemington central mix plant and aportable plant in Monon, withanother plant on standby. Mixertrucks were spaced to cycle in andout of the concrete plants and ontothe job site methodically so therewould be no breaks in the deliveryof concrete. IMI supplied up to 250cu. yds. of concrete per hour (190cu m/hr), with its quality controlpersonnel on site to test each batch.
Challenges AboundSlater said, “This pour is a great
accomplishment to have on ourcompany’s resume, and it was def-initely the most challenging wehad ever done.”However, the challenges in plac-
ing concrete on the job were farfrom over. More than 87,000 cu.yds. (66,500 cu m) of concrete stillhad to be pumped for numerousspecialty contractors involved withthe intricate project, which is underthe direction of Magnetation asconstruction manager.Various Indiana-based contrac-
tors are relying on Masterlink’sconcrete pumping services forspeedy completion of the project.They include MidwestConstructors LLC, Indianapolis,which had the complex task ofconstructing the railcar dumperbuilding, a 250-ft.-long (76 m)concrete conveyor tunnel rising ata steep 12.4 percent slope and apellet load-out building.Meanwhile, Masterlink pumped alarge volume of concrete for
Bowen Engineering Corporation,Indianapolis, which was responsi-ble for constructing a gigantic orebarn along with foundations forseveral of the site’s major build-ings. In addition, the concretepumping company is now servingthe concrete placement needs ofHuston Electric Inc., Lafayette;and Beery Concrete Inc.,Rossville.“It’s a massive project for the
area, and for our company,” saidBryan Gramke, northwest Indianaregional manager at Masterlink.“We established a great workingrelationship with the contractors onsite, and together we’re working tomeet the challenging concretepumping demands and its ambi-tious completion date in just over ayear.“With such a large-scale project,
I’m at the job site a couple days aweek to make sure we’re meetingall these contractors needs with theright equipment, and at the timesrequired.”“Given the unique project, we
had some challenges to workaround,” said Slater. “However,our operators are highly experi-enced, some with the companysince day one; and our equipmenthas the advanced features neededto overcome the unusual concretepumping requirements.”
Busy Pump, BusyConveyor
With the construction of morethan 35 structures, from majorbuildings to equipment pedestals,concrete is placed almost daily onthe job. Therefore, with a project of
this magnitude, a 47Z-Meter boompump and a Telebelt TB 105 con-veyor are dedicated to the projectand remain on the job site.The 47Z pumps concrete for
footings, slabs, piers, walls, decksand flatwork, keeping busy as thevarious buildings emerge at differ-ent construction stages. This boompump model was specifically cho-sen for its long 151 ft. 7 in. (46.2m) vertical reach and Z-Foldboom’s ability to maneuver intodifficult-to-access areas, providingall-around versatility no matterhow varied the demands of a pour. If, however, a longer reach is
needed, Masterlink dispatches itslarger 52Z-Meter, which provesespecially useful on expansivedeck pours. The larger boompump’s 169 ft. 7 in. (51.7 m) reach,combined with its Multi-Z boom,allows it to maneuver each boomsection exactly where needed forprecise concrete placement. Meanwhile, the truck-mounted
belt conveyor, which handled amud mat prior to the big pit pour, ismore commonly used to backfillaround footings and foundations,placing aggregate precisely whereneeded with its 105-ft.-long tele-scopic boom. Not only can theconveyor place backfill, but it can
also place concrete should a con-crete pour be needed while the onsite 47Z is already in use. A secondconveyor, the TB 110, also hasassisted with the high volume ofaggregate placement for the proj-ect, with several thousand tons ofmaterials to have been placed bythese conveyors upon completion.
On TrackAs the Reynolds location offers
convenient access to major high-ways and railways, a rail serviceconstruction project is also underway at the job site, with rail linesthat will connect the iron sources inMinnesota and blast furnaces inOhio and Kentucky. Upon comple-tion, the Reynolds Rail Systemwill be a centralized transportationhub with an extensive infrastruc-ture comprised of a six-layer loopand more than 64,000 ft. (19,500m) of track. The Mag Pellet iron ore process-
ing plant is expected to create morethan 100 jobs for Hoosiers, pro-duce three million metric tons peryear and be the cleanest burningpellet plant in the world.
(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)
Located in a 100-ft. (30 m) deep hole, the large foundation of aniron ore collection pit challenged contractors to develop a strate-gic plan for pumping concrete a distance of 600 ft. (183 m).
Delivery line connected to the boom pipe of a 47Z- and 52Z-Meterthat were set up on a specially created platform.
CONCRETE from page 28
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 31
.com
2005 CAT TH580B, ID# NUC0109, S/N SLH00488, 1860HOURS, STABILIZERS ..................................................$57,300
2011 CATERPILLAR 247B3, ID# MUC0332, S/NTSL00465, 1943 HOURS, CAB, A/C..........................$36,900
2008 CATERPILLAR 246C, ID# NUC0067, S/NJAY01205, 4030 HRS, CAB, A/C ................................$22,900
2010 CATERPILLAR 304CCR, ID# MUC0323, S/NFPK06209, 728 HOURS, LONG STICK, QC ..........$39,500
2012 CATERPILLAR 272D, ID# MUC0180, S/NGSL00315, 5470 HOURS, CAB/HEAT/AIR..............$28,900
2010 CATERPILLAR 304CCR, ID# MUC0295, S/NFPK06067, 2500 HOURS, CAB ..................................$38,300
2005 CATERPILLAR 621G, ID# NBU0080, S/NDBB00246, 3745 HRS, CLEAN, 500 HR SERVICE IN JULY........................................................................................$277,500
2008 CATERPILLAR 247B3, ID# MUC0334, S/NMTL05340, 3984 HOURS, CAB/ A/C........................$23,400
2008 CAT D6TXL, ID# MUC0312, S/N LAY00759, 8075HRS, CAB, AIR..............................................................$157,100
2010 CATERPILLAR D7E, ID# NBU0033, S/NMDB00198, 3600 HOURS, CAB..............................$350,000
1999 CATERPILLAR 140H, ID# MUC0306, S/N2ZK04464, 13822 HOURS, CAB/HEAT/AIR ..........$92,100
2009 CATERPILLAR 12M, ID# MUC0321, S/NB9F00371, 4767 HOURS, CAB, AIR........................$144,700
2009 CATERPILLAR 140M, ID# MUC0313, S/NB9D01851, 6180 HOURS, NICE UNIT..................$144,700
2007 CATERPILLAR 324DL, ID# MUC0272, S/NJJG00430, 5003 HOURS, CAB,AIR..........................$114,300
2008 CATERPILLAR 287C, ID# NUC0085, S/NMAS00628, 4803 HOURS, HIGH FLOW ................$31,400
2011 CATERPILLAR 336E, ID# NUC0031, S/NBZY00778, 3115 HRS, CAB, HEAT, AIR ................$230,100
Page 32 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 33
RENO, Nev. (AP) A 52-ton (47 t) concrete bridge sur-vived a series of 10 earthquakes in the first multiple-shake-table experiment at the University of Nevada’s newEarthquake Engineering Lab in Reno. The 70-ft. (21 m) bridge was shaken in a series of simu-
lated earthquakes, culminating in the large ground motionssimilar to those recorded in the deadly and damaging 1995magnitude 6.9 earthquake in Kobe, Japan. University of Washington researcher John Stanton said the
test was a complete success. He said the bridge withstood thedesign standard and actually exceeded it by 2.2 times. The rocking, pre-tensioned concrete bridge support sys-
tem is a new bridge engineering design the team has devel-oped with the aim of saving lives, reducing onsite construc-tion time and minimizing earthquake damage. It’s the newest addition to UNR’s world-renowned earth-
quake/seismic engineering facility. (This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Shaken But Sturdy…
Concrete BridgeDesign Survives Series of Tests
MISSISSIPPI VALLEY Manufacturing Inc.
(800) 325-8001
EQUIPM
ANYNT COMP PANYEEQUIPM
ANY
Equipment• CZM Drill Rig Distributor• Hydraulic Vibratory Systems • Excavator Mounted Lead System (ELS) • Diesel Pile Hammers • Swinging, Fixed &Railroad Lead Systems & Accessories • Hydraulic Auger Systems • Double-ActingAir/Steam Pile Hammers
Services• Knowledgeable equipment applicationssupport • 24/7 parts and service support • Custom design and fabrication
We were founded to meet the pile driving and drillingequipment needs of our customers who build the foun-dation of our nation’s future. As partners with our cus-tomers, we strive to deliver on time, high quality, top per-forming and cost effective equipment for them to do theirjob well. We provide a safe, healthy and enjoyable workplace where innovation, teamwork and integrity are thecornerstones of our legacy. We take pride in long lastingrelationships with long lasting equipment.
Innovation – Teamwork – Integrity
Mississippi Valley Equipment Company1198 Pershall Road • St. Louis, MO 63137
Phone: 800-325-8001 • Fax: 314-869-6862 • Web: www.MVE-STL.com
Visit www.sealsaver.comfor more information or contact us at
1-800-683-5189
Exclusively manufactured by:
Fluid ControlServices, Inc.1155 Allgood Road • Suite 15
Marietta, GA 30062
1-800-683-5189Fax: 770-509-5832
SEAL SAVER has proven effective inConstruction, Mining, Waste Management,Quarries, Refineries, Marinas, Recycling,Wood Products Processing, Steel Mills
and Hot Slag Industries.
SatisfactionGuaranteed!
SEAL SAVER PROTECTIVECYLINDER COVER
KOMATSUD65EX-15
STOP the never ending cycle of cylinder repairs.
Made inthe USA
The SEAL SAVER WILL:Protect cylinders from the elements • Eliminate dings and dents from fallingdebris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the lifeof cylinder seals • Eliminate rod scoring
Page 34 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Another full field of golfersenjoyed a beautiful round atStonebrooke Golf Club,
Shakopee, Minn., at AGC ofMinnesota’s annual golf tournamenton Aug. 1 to benefit the AGC ofMinnesota Foundation.Attendees enjoyed breakfast, lunch
and beverages on the course, as wellas door prizes and raffles. Below are a list of sponsors:• Hole #1 — Cat Auction Services• Hole #2 — Corporate Connection• Hole #3 — TEMP-AIR• Hole #4 —Orion Search Group
(hole-in-one) Wells Concrete• Hole #5 — Baker Tilly Virchow
Krause• Hole #6 — Kato Roofing• Hole #7 — Braun Intertec• Hole #8 — AGC • Hole #9 — Cobb Strecker
Dunphy & Zimmermann• Hole #10 — American State
Equipment – Could not stay; replacedwith CHI Companies• Hole #11— Chevrolet Business
Elite Dealers/Suburban Chevrolet• Hole #12 — Lockton Companies• Hole #13 — Rachel Contracting• Hole #14 — Allstate Peterbilt• Hole #15 — American
Engineering Testing• Hole #16 — Dunwoody College
of Technology• Hole #17 — GR Promotions• Hole #18 — Mid American
Financial Group
Hole sponsors – not at a hole• Adolfson & Peterson
Construction• Ahmann-Martin• Eide Bailly• General Equipment & Supplies• Hardrives• John A. Knutson & Co.• Martin Marietta• Molin Concrete Products• Sharrow Lifting Products• Zurich
The scholarship recipients at the2014 AGC of Minnesota golf tourna-ment were:• Paul Noll, a student of the
University of Minnesota in the con-struction management/architecturefield.• Frankie Halter, an upcoming
freshman at North Dakota StateUniversity majoring in architecture.• Stephen Kowitz, a carpentry stu-
dent at Alexandria Tech.• Matthew Heller, a construction
management student at MinnesotaStatue University, Mankato.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
Sponsors Gather for AGC of Minnesota Golf Tournament
Rachel Contracting’s Andrea Smith, proj-ect coordinator with John Pipert, safetydirector/business development, also ofRachel Contracting.
At the Rachel Contracting sponsored hole #13 therewas a chance to show off your cornhole bean bagtoss skills. (L-R): Greg Jandro, Braun Intertec; DanMartin, Braun Intertec; Chad Rempe, Kraus-Anderson Construction; and Dan Francois, Kraus-Anderson Construction.
Kelly Kinzer of Marsh & McLennandrives a deep tee shot at the AGCof Minnesota Golf Tournament.
Quenching their thirst on a hot day (L-R) areJohn Hengel and Andy Artley of Purple WaveAuctions, along with the beverage cart golfcourse provider and Ross Schochenmaier,also of Purple Wave Auctions.
Cat Auction Services sponsoredthe first hole.
American Engineering TestingInc.’s Jill Wandemacher (L), con-crete division administrativeassistant, and Sharon Maloney,geotechnical division administra-tive assistant, give away doorprizes.
Off the very cool lake hole that you have totake a ferry ride to the green (L-R) areGarret Shaefer, LI Drainage; Adam Noble,McNeilus Steel; Jeff Bistodeau, RoadMachinery & Supplies; and AndySchwandt, also of Road Machinery &Supplies.
Hole #14 Sponsor AllstatePeterbilt’s Ashley Nauman, market-ing coordinator, and VocationalSales Manager Josh Trapp.
(L-R): Having a great time on hole #7 is BrianRecker, RJM Construction; Ted Beckman, RJMConstruction; Bob Clauson, Moline ConcreteProducts; and Paul Wade, RJM Construction.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 35
855-44TITANtitanmachinery.com
PARTS • SERVICE • RENTALS • SALES
PUT THE POWER OF TITAN to work for you
Call 1.866.643.1010 and use code ADCEGMW or visit www.ClearSpan.com/ADCEGMW and we'll send you a free gift.
fabric structures
SPECIALFINANCING7
RESTRICTIONS APPLY
Y R S
For one year onFabric Structures
ZERO DOWNNO INTEREST
NO PAYMENTS
SPECIAL7
FINANCING
Y
SPECIAL7RESTRICTIONS APPL
NO PAYMENTS
Y R S
NO INTERESTZERO DOWN
Fabric Structures or one year onF
Page 36 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
LICA Nebraska Chapter WelcomesMore Than 400 Attendees to Expo
NMC CAT and Sitech show attendees aSitech Trimble GPS grading system on aCat 2890 track loader.
Under the large tent were many exhibitorslike Big Iron Auction company, represented byDistrict Managers Mark Miller (L) and KurtKircher.
Underground tiling demos were scheduled throughout the event forattendees to get some great hands-on equipment operation.
(L-R): The Titan Machinery crew, Ed Lahmann, product support, Lincoln,Neb.; Gary Groteluschen, field marketer, Omaha, Neb.; Mike Misner, fieldmarketer, Omaha, Neb.; Steve Gosch, field marketer, Omaha, Neb.; and TitanMachinery Leica Specialist Darren Brown, Sioux City, Iowa, with a Case2050M dozer and Leica GPS geosystem.
Adam Lind (L) of Samuelson Land Leveling,Holdredge, Neb., shakes hands with hisfavorite Murphy Tractor Product SpecialistKirk Bender of the Murphy Tractor Lincolnlocation in front of this John Deere 333E CTL.
Equipment like this Komatsu D65EX dozer was run throughthe massive demo areas to give contractors a feel for how theyoperate.
Attendees of the first annual LICA NebraskaConstruction Expo & Field Day register and pick uptheir badges.
(L-R): Wyatt Kreifels, Bob Taft and CallieRademacher have a great time togetherchecking out all of the big equipment on sitelike this Komatsu 61 PXi dozer.
miscellaneous testing and demon-stration of machinery and GPSequipment.As a result of this expo, six new
contractor members and 10 newassociate members have joined theNebraska LICA Chapter. For more information, visit
www.NELICA.org.(This story also can be found on
Construction Equipment Guide’s Web
site at www.constructionequipment-
guide.com.)
EXPO from page 14
T880 Fills Greater Demand forTrucks in Vocational MarketsWhen it comes to vocational
truck sales, there’s a revivalgoing on. A year-over-year sales
increase for Kenworth vocationaltrucks reflects growing construc-tion activity, increased oil and gasproduction, and encouraging newhousing starts figures, accordingto Kurt Swihart, Kenworth mar-keting director.Demand also is being driven
by construction companies, con-tractors, concrete producers andbuilding suppliers operating old2004 and 2007 EPA engine unitsthat need to be replaced with newtrucks.“As a result, we’ve seen strong
interest in our new KenworthT880 vocational flagship truckthat began full production at thestart of 2014,” Swihart said. “TheT880 is expected to soon repre-sent about 50 percent ofKenworth’s vocational truck pro-duction.”The Kenworth T880 attracted
significant interest at leading
industry trade shows such asConExpo-Con/AGG in LasVegas, the Work Truck Show inIndianapolis, and the GlobalPetroleum Show in Calgary.Vocational truck buyers are
choosing the Kenworth T880because of its increased drivercomfort from a wider and quietercab with its triple-sealed androbust doors, increased visibilityfrom the panoramic, one-piecewindshield, and best-in-class for-ward lighting systems. Buyersalso appreciate the T880’s inte-grated powertrain packages.“For example, the PACCAR
MX-13 engine coupled with anautomatic or automated transmis-sion helps remove some stressfrom the overall driving experi-ence, especially for younger,more inexperienced drivers,”Swihart said. “Plus, theKenworth T880 is more comfort-able to drive, offers better seatsand pedal placement, and pos-sesses excellent maneuverability.The result is a more comfortable
work environment, and a com-fortable driver is a more produc-tive driver.”And productivity is really
what’s it’s all about when itcomes to vocational trucks.“Simply stated, the Kenworth
T880 is a dependable, versatiletruck capable of performing thetoughest jobs productively andefficiently. In the final analysis,the truck with the most turnsdone in a single day is what willhelp vocational truck operatorswin the day. For most vocationaltruck fleets, even the equivalentof one more load delivered eachday through increased payloadcapacity is going to make thebiggest difference in your bottomline,” said Swihart. “As we liketo say, the Kenworth T880 is ajob site hero for our customers.”For more information, visit
www.kenworth.com. (This story also can be found on
Construction Equipment Guide’sWeb site at www.construc-tionequipmentguide.com.)
Pages 37-45To view our current comparison trailer specification charts visit www.constructionequipmentguide.com
SECT IONTrucks & Trailers
Mack Pinnacle StealsShow at Music AwardsIt doesn’t get “much” better than
this. A Mack Pinnacle RawhideEdition carrying members of theCanadian rap rock band DownWith Webster stole the show dur-ing its grand red carpet entrance atthe recent Much Music VideoAwards in Toronto.Four members of the band,
which was nominated for popvideo of the year, arrived on the redcarpet in a 70-in. mid-rise sleepercab version of the RawhideEdition, perfect for making animpressive entrance. The truck’sbutton-tuck interior offered maxi-mum style and comfort for theband.“A rock rap band like Down
With Webster deserves an extraor-dinary and unique arrival at anevent like the Much Music VideoAwards,” said John Walsh, Mackvice president of marketing. “If
they wanted unique, they gotunique. The Mack Pinnacle offereda show-stopping entrance and onethat would be difficult to competewith for any other band. It wasclear that the entrance of the bandin our Pinnacle Rawhide Editionwould be the buzz-worthy momentof the red carpet.”The truck was equipped with a
Mack MP8 505E+ engine andMack mDRIVE automated manu-al transmission delivering thepower and performance bandmembers desired for their arrival.The 25th annual Much Music
Video Awards was co-hosted byKylie and Kendall Jenner.For more information, visit
www.macktrucks.com.(This story also can be found on
Construction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)
Members of the band Down With Webster pose in front of theMack Pinnacle Rawhide Edition, which recently escorted theband to the Much Music Video Awards in Toronto.
Demand is being driven by construction companies, contractors, concrete producers and build-ing suppliers operating old 2004 and 2007 EPA engine units that need to be replaced with newtrucks.
Page 38 • August 16, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Rated at 130,000 lbs. (58,967 kg)capacity overall and 130,000 lbs. in 10-ft. (3 m) concentrated, the XL 130Hydraulic Detachable Gooseneck(HDG) mulit-axle trailer is perfect forhauling larger construction equipment.The hydraulic multi-axle unit includesa three-axle trailer, two-axle east coastbooster, and two-axle jeep (with a pinon axle on the jeep). The jeep isdesigned for higher versatility andallows for a better load distribution.The XL classic-style hydraulic goose-neck is 12 ft. 5 in. (3.8 m) long andincludes a 49-in. (124 cm) fifth wheelheight with seven ride height positionsas well as a 72-in. (183 cm) flip neckfor the two-axle jeep. The main deck is 9 ft. (2.7 m) wide
and has a length of just over 26 ft. (7.9m) with a ground clearance of 8 inch-es. The width of the main deck can beextended to 11 ft. (3.3 m) with 12 in.(30.5 cm) heavy-duty removableswing out outriggers. The main deck also is outfitted with
five bent D-rings and four pan-style D-rings per side and 31-in. (79 cm) frontflip ramps. An open boom trough goesinto a 5-ft. (1.5 m) bucket well with a
steel plated bottom on the rear bridgefor added durability, and the designalso allows the boom to be knuckledunder without hitting or damaging thecylinder. The deck also features 1 ¾-in.(4.4 cm) raised apitong decking — awood stronger than oak. The rear deck is 14 ft. 2 in. (4.3 m)
long with a loaded deck height of 43in. (109 cm) and includes a batteryback up for the strobe lights. The trail-er has an airlift on the third axle toreduce wear and frame reinforcementfor the two-axle booster. The rear deckalso possesses raised heavy-duty load-bearing wheel covers for equipment tobe parked on. For extra versatility, the XL 130
HDG connects different ways for scal-ing with an east coast booster and canbe run as a five-axle, 3 + 2, or 4 + 1. “The new XL 130 HDG multi-axle
trailer is flexible, versatile, rugged andincredibly durable for a variety ofofferings in the construction market,”said Rodney Crim, director of sales atXL Specialized Trailers. “We at XLTrailers greatly value our customers,and this is another example of us meet-ing customers’ needs. For more information, visit xlspe-
cializedtrailer.com.(This story also can be found on
Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)
XL Trailer Introduces Multi-Axle Trailers
The XL classic-style hydraulic gooseneck is 12 ft. 5 in. (3.8 m) long andincludes a 49-in. (124 cm) fifth wheel height with seven ride height posi-tions as well as a 72-in. (183 cm) flip neck for the two-axle jeep.
WE VULCANIZE
DuraClass Unveils Newly Improved HPT ‘Tub’ Body LineDuraClass recently introduced the newly improved HPT
“tub” body line. The line has been redesigned to meet all heavyduty dump body needs.The HPT-B1 features a closed fender design, and comes in
14- to 18-ft. (4.3 to 5.5 m) lengths in either carbon steel orstainless steel. The HPT-B1 has capacity ranges from 10- to20-cu. yd. (7.6 to 15.3 cu m).The HPT-B2 features an open fender
design, which decreases the pos-sible areas for rust and theoverall body weight. The bodycomes in 10- and 11-ft. (3 to3.3 m) lengths in 3/16-in. AR400carbon steel, and 14- to 18-ft. (4.2to 5.4 m) lengths in 3/16-in. hi-ten-sile carbon steel. The HPT-B2 alsohas an option for stainless steel.DuraClass designs and manu-
factures a comprehensive range ofpremium Class 3 to 8 dump bod-ies, hoists, and related equipmentand offers more than 100 years ofengineering and manufacturingexpertise.For more information, call 800/728-4345
or visit www.duraclass.com.(This story also can be found on Construction
Equipment Guide’s Web site at www.constructionequipment-
guide.com.)The HPT-B1 features a closed fender design, and comes in 14- to 18-ft. (4.3 to 5.5 m) lengths in eithercarbon steel or stainless steel. The HPT-B1 has capacity ranges from 10- to 20-cu. yd. (7.6 to 15.3 cu m).
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • August 16, 2014 • Page 39
Vermeer Sales & Service
1675 126th St. WestBurnsville, MN 55337
952-890-6144Fax: 952-882-2980
www.vermeerofminnesota.com
Midwest Trailers Plus, Inc.548 29th St. West
Des Moines, IA 50265515-223-8463
Toll Free: 888-560-2787Fax: 515-223-6446
www.midwesttrailersplus.com
Farm-Rite Equipment Inc.
901 Parker Ave WestPO Box 26
Dassel, MN 55325320-275-2737
Toll Free: 888-679-4857www.farmriteequip.com
K.C. Bobcat2209 W. 40 Highway
Blue Springs, MO 64015800-697-4228
Fax: 816-229-7631Olathe, KS
800-598-4228Platte City, MO800-984-3001
McCann Industries, Inc.
Addison543 South Rohlwing Road
Addison, IL 60101630-627-0000 • Fax: 630-627-8711
Bolingbrook250 East Frontage RoadBolingbrook, IL 60440
630-739-7770 • Fax: 630-739-7699Chicago
2350 South Laflin StreetChicago, IL 60608
312-942-9200 • Fax: 312-421-3502Crestwood
4701 West 137th StreetCrestwood, IL 60445
708-597-3110 • Fax: 708-597-9945
McHenry4102 W. Crystal Lake Road
McHenry, IL 60050815-385-0420 • Fax: 815-385-2975
Schererville1133 Indianapolis Boulevard
Schererville, IN 46375219-865-6545 • Fax: 219-865-0269
Wauconda1360 North Rand Road
Wauconda, IL 60084847-526-9444 • Fax: 847-526-9448
www.McCannOnline.com
Titan MachineryShakopee Division
6340 Hwy 101Shakopee, MN 55379
952-445-5400 • 800-795-9274Fax: 952-445-0365Duluth Division4311 Haines Rd.
Hermantown, MN 55811218-727-3038 • 800-795-0117
Fax: 218-727-2827Rogers Division
14375 James Rd.Rogers, MN 55374
763-428-5099 • Fax: 763-428-5051Industrial Division
N1626 Wuensch Rd.LaCrosse, WI 54601
608-788-1025 • 800-780-1025Fax: 608-788-1027
Page 40 • August 16, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
www.ZipsTransportEquipment.com
Smartphone Users
Visit Us Online(800) 222-6047
TrailMax FWTD-70-PR8 degree load angle with 33" deck height
XL Specialized XL-70-HDG13HP Honda Motor with aluminum pullouts
Smart Body SBMT Construction Service BodyModular, Extra Large Toolboxes, Gooseneck Ball,Transfer Tank, Aluminum Deck, Customizable
Excellent for Pavers!
HydraulicDetachableGooseneck
Design Your UltimateWork Truck!
JEFF BELZER’SDodge Ram Tough
Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.
COMMERCIAL HEADQUARTERSJeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN
Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change
George Miller [email protected]
John Zadurski [email protected]
Brent Loucks [email protected]
Gas-2500, Ready for Plow 2014 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group
2 ram 5500 4x4 108 c/a.please call for spec
NEW PROMASTERS HERE & IN TRANSIT
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • August 16, 2014 • Page 41
#1Chrysler Corp. Commercial
Dealer in Minnesota
We Deliver!
The fast lane for small business.
18 Cabs and Chassis in Stock
More Coming!RAM H.D. HEADQUARTERSFURY MOTORS South St. Paul, Minnesota
Truck Master Dick Reineck • 651.251.8214 direct • [email protected] * Pricing represents all Denver business center rebates deducted!
32 Promasters Ready to Go!
2014 Ram Caravan CargoP/W, P/L, T/C, A/C
MSRP $23,310
$avings $ale $18,499*
2013 Ram 3500Crew 4x4 Dually AIS A/T 850 Cummins P/W,
P/L, T/C, A/C, Bedliner
MSRP $53,930
$avings $ale $44,113*
Promaster 1500FWD V/6 Auto, P/W, P/L, T/C, A/C
MSRP $31,025
$avings $ale $28,579*
Choose from 32
Choose from 7Choose from 2
Tows 20,800#’s
The Ram is a perfectsize, very comfortableto drive. We are picking up two morefrom Fury Motorsnext week.”
Tim Haugen
Floral Merchandizer
Bachman’s, Minneapolis, MN
Page 42 • August 16, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • August 16, 2014 • Page 43
SCHEDULED MAINTENANCE 1
2-YEAR/24K + PLUS
UPFIT CASH 2
+ PLUS CURRENT
OFFERS
1 On select models starting with 2014. eligible vehicles include purchased or leased new 2014 chevrol et cars, trucks, or crossovers in the u.S. covers scheduled oil changes with filter, tire rotations, and 27-point inspections, according to your new vehicle’s recommended maintenance schedule, for a m aximum of four service events within 2 years or 24,000 miles, whichever comes first. does not include air filters. extra charge may apply for dual-rear-wheel tire rotations. See participating dealer for other restri ctions and complete details.
2 Not valid with all offers. allowance amounts include parts and labor. upfit cash is also available for the transfer of an existing upfit. See dealer for details. take delivery by 9/30/14. 3 Fully backed by gm. gm accessories permanently installed at the time of new-vehicle delivery are co vered under the new-Vehicle limited Warranty. if installed after delivery, coverage on parts and lab or is for the balance of the new-vehicle warranty or a minimum of 12 months or 12,000 miles, whichev er comes first. gm
accessories not requiring installation or purchased over the counter carry a 12-month limited warran ty on parts only. does not apply to licensed products. take delivery by 9/30/14. 4 Requires available Snow plow prep package (VYu) and Snow plow upfit. Snow plow upfit cash is good f or the transfer of an existing snow plow. take delivery by 9/30/14. 5 Adrian Steel van equipment is warranted to be free from defects in material and workmanship, under normal use and service, for a period of 3 years or 36,000 miles, whichever occurs first from the dat e of delivery to the original retail purchaser when installed by an authorized adrian Steel distribu tor. adrian Steel is a
registered trademark of adrian Steel. adrian Steel packages available via transportation fee of $200 . See dealer for details. take delivery by 9/30/14. 6 To qualify, vehicle must be used in the day-to-day operation of the business and not solely for tra nsportation purposes. must provide proof of business. For complete program requirements, including i nformation regarding offers, vehicles, equipment, options, warranties, and ordering, consult your ch evrolet dealer or visit
gmbusinesschoice.net. take delivery by 9/30/14. 7 According to your vehicle’s recommended maintenance schedule for up to 2 years or 30,000 miles, whi chever comes first. does not include air filters. covers six oil changes for gasoline engines and fo ur oil changes for diesel. extra charge may apply for dual-rear-wheel tire rotations. See participat ing dealer for
restrictions and complete details. ©2013 general motors. all rights reserved.
Page 44 • August 16, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
The new Kenworth K270 and K370cabovers with extensive new exteriorand interior enhancements are nowavailable for order.Kenworth’s K270 Class 6 and K370
Class 7 cabovers are for pick-up-and-delivery operations, food and bev-erage companies, furniture hauling,landscape businesses, and streetsweeping and striping, amongother applications. The Kenworthcabovers are especially ideal forcity and neighborhood applica-tions, where tight turning and ashorter overall length are required.New additions to the Kenworth
K270 and K370 cabovers include afresh exterior, new dash and gaugecluster, front air disc brakes, elec-tronic braking module, Allison 6-speed transmission, push-buttoncontrol shifter and Dana rear axles.“With these key enhancements,
Kenworth is bringing a new levelof excellence of quality, innovationand comfort to the medium duty mar-ket,” said Doug Powell, Kenworth’smedium duty marketing manager.Powell noted that truck operators
running medium duty conventionaltrucks in metropolitan areas also areconsidering cabovers because of a bet-
ter turning radius, extra payload room,and changing urban length laws.“Compared to a typical medium
duty conventional, the K270 and K370offer up to a 30 percent better curb-to-curb turning radius, a 63.4-inch BBC
with an extra 45 inches of payloadroom, and a 35-foot overall lengthwhich is rapidly becoming the newnorm in major cities,” Powell said.The K270 and K370 are standard
with the 6.7-L PACCAR PX-7 enginerated at 220-hp and 520 lb.-ft. of
torque, and the Allison 2100HS 5-speed transmission. Both truck modelsfeature a standard air ride driver’s seatand two-person bench seating withstorage underneath. A new option issingle driver and passenger seats with
a large console with storage andcup holders in between.Available with wheelbases
ranging from 142 to 242 in. (360to 614 cm) in 12-in. (30.5 cm)increments, the Kenworth K270and K370 can accommodate bod-ies from 16 to 28 ft. (4.8 to 8.5 m).A large 2,500-sq.-in. wraparoundwindshield combines with largeside windows to give optimumvisibility.For specialized applications, the
Kenworth cabovers offer a new“clear rail” package that relocatesthe air tanks, DEF tank, batterybox, and exhaust after treatmentup behind the cab. This newoption opens up room for custom
bodies, such as street sweepers.For more information, visit
www.kenworth.com. (This story also can be found on
Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)
Kenworth K270, K370 Now Available
New additions to the Kenworth K270 andK370 cabovers include a fresh exterior,new dash and gauge cluster, front air discbrakes, electronic braking module, Allison6-speed transmission, push-button controlshifter and Dana rear axles.
Ideal for the aggregates industry to haul and dump graveland other materials, the XL bottom dump features a cus-tomized extra large upper hopper opening of 96 by 193 in.(244 by 490 cm). At 53 in. (134 cm) high, the upper hopperis made out of 10-gauge steel and uses a flip and go tarp sys-tem. The lower hopper is 59 by 118 in. (150 by 300 cm) andequipped with ASTM A-572 10-gauge plate. Both the upperand lower hoppers are fitted with reinforced side walls foradded strength and stability. With a length of 40 ft. (12 m), the trailer features a side
height of 9 ft., 2 in. (2.8 m) plus 10-in. (25.4 cm) boards. Aweight of 12,750 lbs. (5,783 kg) that includes a tarp andpush-block, the bottom dump trailer offers a 25-cu. yd. (19cu m) capacity with 10-in. bang boards. The gates, like thelower hopper, are made of ASTM A-5723 steel and featureadjustable side locks. To maneuver over large piles, an oscillating fifth wheel
pivots as needed with an 18-in. (45.7 cm) kingpin setting.Featuring two 25,000-lb. (11,340 kg), 5-in. (12.7 cm) tubu-lar axles, the trailer has cut and chip resistant tires for on andoff road use and 16.5 by 7-in. (42 by 17.7 cm) brakes. The air-operated gate system is equipped with two 8-in.
(20 cm) cylinders, in-line filter and lubricator, 60-gal. (227L) air reservoir and quick exhaust valves. Prepped for elec-tronic cab control, open and shut gates from the cab or fromthe ground using manual override. A heavy-duty push-blockis 44 in. (112 cm) wide and 10 in. tall for off-road jobs intough traction conditions.
“The new XL Bottom Dump trailer’s large hopper allowsusers to reach the max capacity even when hauling lessdense materials, resulting in better efficiency out on the jobsite,” said Rodney Crim, director of sales at XL SpecializedTrailers. “Our trailers are always designed with the top mate-rials for an incredibly durable product and the bottom dumptrailer is no exception. Aggregate jobs need reliable, ruggedproducts, and considering the size, maneuverability andother new features, the XL bottom dump trailer will be a per-fect combination out in the field. For more information, visit xlspecializedtrailer.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
XL Unveils Bottom Dump Trailer
The XL bottom dump trailer is something that the cus-tomers were very interested in and it hits another mar-ket — the aggregates market — that XL has not yetbeen a part of, said Rodney Crim, director of sales atXL Specialized Trailers.
AIS ConstructionEquipmentCorporation
3600 North Grand River AvenueLansing, MI 48906
517-321-8000Fax: 517-321-4191
600 44th Street S.W.Grand Rapids, MI 49548
616-538-2400Fax: 616-538-0449
65809 Gratiot AvenueLenox, MI 48050
586-727-7502Fax: 586-727-7311
4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
8300 M-72 EastWilliamsburg, MI 49690
231-267-5060Fax: 231-267-5257
56555 Pontiac TrailNew Hudson, MI 48165
248-437-8121800-457-8121
www.aisequip.com
949 3rd Ave.Windom, MN 56101
507-678-2752
Ditch Witch ofNorth Dakota1100 W. Main Ave.West Fargo, ND 58078
701-282-3600877-282-3600
Fax: 701-282-3636
2921 Twin City Dr.Mandan, ND 58554
701-663-9551877-663-9551
Fax: 701-663-0692
3660 Interchange RoadColumbus, OH 43204
614-443-9751888-DITCHWITCHFax: 614-443-9219
www.ditchwitchOH.com
9052 Marshall RoadCranberry Township, PA 16066
724-742-2844888-DITCHWITCHFax: 724-742-2877
www.ditchwitchPA.com
Vermeer Sales & Service661 Hwy T14Pella, IA 50219866-483-7633
Fax: 641-628-4283
Vermeer Siouxland4858 D. Ave.
Marcus, IA 51035712-376-2310
Fax: 712-376-2312
Vermeer of Eastern Iowa101 Commerce Blvd.Tipton, IA 50219563-886-2444
Fax: 563-886-2223www.vermeeriowa.com
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • August 16, 2014 • Page 45
6140 Highway 10 NWAnoka, MN 55303
763-323-1720 888-448-5266
Fax: 763-422-3949
3021 West 133rd Shakopee, MN 55379
952-445-6310 Fax: 952-496-0263
23580 Highway 55 Loretto, MN 55357
763-479-8200 Fax: 763-479-8201
1015 Highway 212 WestNorwood Young America, MN
952-467-2182Fax: 952-467-3259
901 Parker Ave. W.Dassel, MN 55325
877-570-2740www.farmriteequip.com
Scharber & Sons, Inc.13725 Main Street Rogers, MN 55374
763-428-4107 Fax: 763-428-2700 www.scharbers.com
1929 E. Madison Ave.Mankato, MN 56001
507-387-7376Fax: 507-387-7399
1400 W. Ogden Ave.Naperville, IL630-355-7150
310 W. 162 St. Rt. 6South Holland, IL
708-331-6362
3110 Prairie Rd.Rockford, IL
815-961-3160
1560 North Old Rand Rd. Wauconda, IL847-526-7700
600 Walnut CtRockdale, IL
815-730-9011
2170 South Yost Ave.Bloomington, IN 47403
812-333-9677Fax: 812-333-9731
3120 Congressional ParkwayFort Wayne, IN 46825
260-482-8576Fax: 260-483-4057
7355 East 30th St.Indianapolis, IN 46219
317-544-3411
3021 South 460 EastLafayette, IN 47905
765-477-6933Fax: 765-448-9038
25166 State Road 2South Bend, IN 46619
574-232-1461Fax: 574-233-3324
www.westsidetractorsales.com
Page 46 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
1401 2Nd AvENUE
dES moINES, IA 50314(515) 283-2215
FAx: (515) 283-0295(800) 369-2215
2625 w. AIRlINE Hwy.wATERloo, IA 50703
(319) 236-6830FAx: (319) 236-6834
(800) 791-9249
2950 6TH STREET SwcEdAR RAPIdS, IA 52404
(319) 365-5139FAx: (319) 365-6726
(800) 728-5139
2100 E. lINcolN wAy
AmES, IA 50010(515) 233-9500
FAx: (515) 233-9505(866) 856-2312
TOP NOTCHEQUIPMENT, INC.
5505 HIgHwAy 169 N.
PlymoUTH, mN 55442
(888) 824-6559
(763) 398-0079
FAx: (763) 551-7916
www.ToPNoTcHEQUIPmENT.com
STARE Q U I P M E N T
LT D .
www.STAREQUIP.com
STAR EQUIPMENT LTD.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 47
Find Us on Follow Us on
Portable Power
800.633.5206 DoosanPortablePower.com © 2014 Doosan Infracore Portable Power
Whether you are looking for products with the latest technology or you want to have your old machine remanufactured, Doosan Portable Power can help you acheive success. Focused on customer satisfaction and product solutions, our dealer network is the largest nationwide network in the industry. Contact your local dealer today.
WE DO MORE THAN DESIGN EQUIPMENT.
WE POWER YOUR SUCCESS.
Aspen Equipment Co.
9150 Pillsbury Ave. SBloomington, MN 55420
(952) 888-2525
McAllisterEquipment Co.
150 E. North Ave.Villa Park, IL 60181
(630) 530-7600Alsip/Chicago, IL(708) 389-7700
E. Peoria, IL(309) 694-4455
Rockford, IL(815) 227-0555Springfield, IL
(217) 789-0351
RolandMachinery Co.
4670 Crossroads Industrial DriveBridgeton, MO
(314) 291-1330Cape Girardeau, MO
(573) 334-5252Columbia, MO
(573) 814-0083Palmyra, MO
(573) 769-2056Carterville, IL
(618) 985-3399DePere, WI
(920) 532-0165DeForest, WI
(608) 842-4151Eau Claire, WI
(715) 874-5400Franksville, WI
(262) 835-2710Schofield, WI
(715) 355-9898Escanaba, MI
(906) 786-6920
Central PowerSystems &Services
9200 Liberty DriveLiberty, MO 60468
(816) 781-8070Springfield, MO(417) 865-0505
Wichita, KS(316) 943-1231Great Bend, KS(620) 792-1361
Liberal, KS(620) 624-7274
Salina, KS(785) 825-8291
Colby, KS(785) 462-8211
Page 48 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Takeuchi Updates Excavator ModelLineup With Addition of TB230, TB240
Takeuchi-US has updated its excavator model lineup. TheTakeuchi TB230 and TB240 compact excavators share thesame design philosophy as the recently introduced TB260 —delivering increased performance, greater working range,improved operator comfort and improved serviceability,according to the manufacturer.
These models represent some of the most advanced com-pact hydraulic excavators available today, featuring EPAFinal Tier IV compliant engines, greater hydraulic perform-ance, advanced multi-function electronic displays as well asspacious operator stations with precision pilot controls,improved visibility and deluxe suspension seats.
TB230With an operating weight of 6,607 lbs. (2,997 kg), and a
bucket breakout force of 6,471 lbs., the TB230 is character-ized by its sleek redesigned exterior, which offers better vis-ibility and improved service access. The well-appointedoperator’s station includes a multi-function monitor, functionswitches, electronic throttle control and precision pilot con-trols with a proportional slide switch to control auxiliaryhydraulic functions.
The TB230 features a 24.4 hp Final Tier IV computer-
controlled Yanmar engine that delivers smooth efficientpower.
TB240With an operating weight of 8,289 lbs. (3,760 kg), the new
TB240 compact excavator delivers 9,959 lbs. of bucket dig-ging force — nearly 15 percent more than the previousTB235. The Tier IV computer-controlled Yanmar engineprovides over 35 gross hp, an increase of more than 20 per-cent and features new working modes; eco and power forgreater performance.
Featuring the same precision pilot controls that operatorshave come to expect on Takeuchi excavators, the machinehas been upgraded to include adjustable auxiliary flow set-tings so multiple attachments can be set up; greatly improv-ing the versatility. The TB240 features a reinforced boomwith large gusset reinforcements for improved strength anddurability. The body has been redesigned to allow forground-level panoramic serviceability, eliminating the needfor a tilting operator station.
For more information, visit www.takeuchi-us.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
With an operating weight of 8,289 lbs. (3,760 kg), the TB240 compact excavator delivers 9,959 lbs. of bucket dig-ging force.
IOWAZIEGLER CAT
Altoona800-342-7002
Atlantic877-547-3819
Sioux City712-252-4401Fort Dodge
800-342-1848Mason City
800-342-1849Postville
800-526-0889
KENTUCKYDIAMOND EQUIPMENT
www.diamondequipment.comBowling Green(270) 781-1061
OHIO CATwww.OhioCAT.com
Richwood(888) 446-4658
WILSON EQUIPMENT CO.www.wilsonequipment.com
Corbin(606) 528-0700
Lexington(859) 254-6443Prestonsburg
(606) 874-8036
MINNESOTAZIEGLER CAT
www.ZieglerCAT.comMinneapolis
(800) 352-2812Brainerd
(877) 829-9850Buhl
(800) 446-9795Columbus
(866) 982-5656Crookston
(800) 422-5782Duluth
(800) 421-3831Fergus Falls
(800) 346-7649Jackson
(866) 847-6401Marshall
(800) 325-4929North Mankato(877) 845-3938
Rochester(800) 247-1068
Shakopee(800) 352-2812
St. Cloud(800) 522-9469
MICHIGANMILLER-BRADFORD
& RISBERG, INC.www.miller-bradford.com
Negaunee800-562-9770
OHIOOHIO CAT
www.OhioCAT.comBroadview Heights(800) 837-6200
Sharonville(888) 332-4658 (Sales & Service)
(888) RENT-441 (Rental)Columbus
(888) 441-4658 (Sales & Service)
(888) RENT-441 (Rental)Perrysburg
(888) 339-4658 (Sales & Service)
(888) RENT-441 (Rental)Troy
(888) 330-4658Youngstown
(800) 837-6203Cadiz
(800) 837-6204Canton
(800) 837-6207Zanesville
(800) 837-6205N. Canton
(888) 736-8443Oakwood Village(800) 633-1020
WISCONSINMILLER-BRADFORD
& RISBERG INC.www.miller-bradford.com
Sussex800-242-3115
Madison800-585-7219
Eau Claire800-585-7232
DePere800-638-7448Abbotsford
888-886-4410
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 49
ILLINOISBIRKEY'S CONST. EQUIPMENT
construction.birkeys.comGalesburg
(309) 341-4360Bloomington
(309) 827-0520Mattoon
(217) 235-3158Urbana
(217) 337-1781
DIAMOND EQUIPMENTwww.diamondequipment.com
Mt. Vernon(618) 242-2273
WEST SIDE TRACTOR SALESwww.westsidetractorsales.com
Naperville(630) 355-7150
Rockdale(815) 730-9011
Rockford(815) 961-3160South Holland
(708) 331-6362Wauconda
(847) 526-7700
INDIANADIAMOND EQUIPMENT
www.diamondequipment.comEvansville
(812) 425-4428
MACALLISTER MACHINERYSALES/RENTALS
www.macallister.comIndianapolis
(317) 545-2151Indianapolis
(317) 244-RENT (7368)Fort Wayne
(260) 483-6469 (heavy equip.)
(260) 969-3322 (rental store)Lafayette
(765) 449-8191 (heavy equipment)
(765) 446-5600 (rental Store)Terre Haute
(812) 478-3155(heavy equipment)
(812) 231-6000 (rental store)South Bend
(574) 288-6622Washington
(812) 254-1712Bicknell
(812) 735-0286Bloomington
(812) 349-9220Fishers
(317) 598-9700Greensburg
(812) 663-5829Richmond
(765) 966-0626Yorktown
(765) 759-2CAT (2228)
Page 50 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 51
IT’S GOT YOUR FINGERPRINTS ALL OVER IT.
Like all of our equipment, the850K was designed with exten-sive input by owners and oper-ators like you. We listened andresponded with numerous K-Series enhancements, includ-ing additional power and weightfor increased productivity. AnEPA Interim Tier 4 diesel enginefor work in nonattainmentareas. Spacious redesigned cabthat’s noticeably quieter andmore comfortable. And best-in-class serviceability features,such as an innovative easy-to-clean “V-Cool” package. Add tothose, the unsurpassed operat-ing ease and maneuverabilityoperators have come to expectfrom our crawlers, and the850K is an obvious choice. To get your hands on one, see your John Deere dealer.
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989/777-0090
Fax: 989/777-1583
Grand Rapids600 44th Street S.W.Grand Rapids, MI
49548616/538-2400
Fax: 616/538-0449
Northeast Detroit65809 Gratiot AveLenox, MI 48050
586/727-7502Fax: 586/727-7311
West Detroit56555 Pontiac Trail
New Hudson, MI 48165 248/437-8121
1-800/457-8121
Traverse City8300 M-72 EastWilliamsburg, MI
49690231/267-5060
Fax: 231/267-5257
Naperville, IL 60563630/355-7150
Fax: 630/355-7173
Rockdale, IL 60436815/730-9011
1-800/937-3355Fax: 815/730-9036
Rockford, IL 60012815/961-3160
Fax: 815/965-1810
South Holland, IL60473
708/331-6362Fax: 708/331-7334
Wauconda, IL 60084847/526-7700
Fax: 847/526-3565
Bloomington, IN 47403812/333-9677
Fax: 812/333-9731
Fort Wayne, IN 46825260/482-8576
Fax: 260/483-4057
Indianapolis, IN 46219317/544-3411
Fax: 317/544-3420
Lafayette, IN 47905765/447-6933
Fax: 765/448-9038
South Bend, IN 46619574/232-1461
Fax: 574/233-3324
Des Moines, IA800/822-2212
Fort Dodge, IA800/362-2487
Sioux City, IA800/352-4693
Waterloo, IA800/772-2019
Dodge City, KS800/794-0172
Great Bend, KS800/264-4056
Park City, KS800/262-0139
Topeka, KS800/279-6087
Ulysses, KS800/472-9238
Kansas City, MO888/306-3434
Springfield, MO888/306-2656
Gering, NE800/205-6784
Grand Island, NE800/868-4017
Lincoln, NE800/416-5518
North Platte, NE800/894-7060
Omaha, NE800/416-5095
Brunswick, OH800/716-9796
Cambridge, OH 740/439-2747
Canton, OH866/235-0438
Chillicothe, OH 740/663-5300
Cincinnati, OH800/844-3734
Columbus, OH800/222-2010
Lima, OH800/423-7445
Painesville, OH866/800-1398
Poland(Youngstown), OH
866/503-7259
Vandalia (Dayton),OH
800/233-4228
Cranberry Twp, PA724/776-3636
Delmont, PA724/837-4500
Ashland, WI715/682-5522
Chippewa Falls, WI715/834-2924
Monico, WI715/487-5583
Mosinee, WI715/693-3820
Duluth, MN218/722-7456
Bemidji, MN218/759-1996
Grand Rapids, MN218/326-9427
Escanaba, MI906/789-9054
Louisville, KY502/253-3721
Richmond, KY859/623-2030
Bowling Green, KY270/842-3400
London, KY606/862-8447
www.westsidetractorsales.com www.murphytractor.com
,
,
,
D
B
2
2
a
E
www.nortrax.com www.brookstractor.comSun Prairie
1900 W. Main St.P.O. Box 9
Sun Prairie, WI 53590608-837-5141
Milwaukee12101 W. Silver Spring Dr.
Milwaukee, WI 53225414-462-9790
De Pere1031 Lawrence Dr.De Pere, WI 54115
920-336-5711
West Salem451 W. Avenue N.
West Salem, WI 54669608-786-2644
Plover5429 Prairie Dr.Plover, WI 54467
715-254-2777
Page 52 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Setback for Missouri Highway Officials...
Voters Defeat Multi-Billion-DollarSales Tax Hike for TransportationBy David A. LiebASSOCIATED PRESS
JEFFERSON CITY, Mo. (AP)Missouri voters defeated a multi-bil-lion-dollar sales tax hike for transporta-tion Aug. 5, a significant setback forhighway officials who have warnedthat the state soon won’t have enoughmoney to repair all of its aging roadsand bridges. The three-quarters cent sales tax
headlined a Missouri primary ballotthat featured few competitive top-of-the-ticket races but several proposedconstitutional amendments, includingenhanced rights for farmers, gun own-ers and cellphone users. A proposal creating a constitutional
right to farm appeared to narrowlypass, with a margin of about 2,500 outof almost 1 million votes cast. The out-come was close enough that a recountcould be requested. Proposed Constitutional
Amendment 7 would have fundedmore than 800 highway and transporta-tion projects, including the widening ofInterstate 70 to three lanes in eachdirection between Kansas City and St.Louis. It was projected to generate atleast $540 million annually for 10years, making it Missouri’s largest-evertax increase. But that proved to be too much to
accept for Missouri’s generally tax-averse voters. “I think we’ve got enough taxes
already, and I think they need to spendtheir money more wisely,’’ said JamieOwenbey a state worker from JeffersonCity who voted against the measure. “There’s not a tax I would vote for
— no new taxes at all,’’ added MikeMcArthy a self-employed outdoor pho-tographer and writer from Cottleville. The general sales tax would have
marked a historic shift for a state thathas relied solely on user fees such asfuel and vehicle taxes to fund its high-ways for nearly a century. Missourivoters have not passed a tax increasefor roads since 1987, though theLegislature approved a gradual fuel taxincrease in 1992. The latest tax proposal was placed
on the ballot by the Republican-led
Legislature with the support of someDemocrats. Voters had to weigh the need for
more road funding — the state’s high-way budget is projected to drop to $325million by 2017 from a recent high of$1.3 billion annually — against the costof a tax hike that could have pushed thetotal state and local sales tax to near 10cents on a dollar in some areas. Without additional money, the
Missouri Department of Transportationhas said it soon won’t be able to ade-quately maintain the state’s roads andbridges, much less undertake majornew projects.
State Sen. Mike Kehoe, a formertransportation commissioner who sup-ported the tax proposal, said it’s unlike-ly the Legislature will put forwardanother transportation funding plannext year. Rather, he said it may takethe closure of old bridges or otherextreme measures before the state’stransportation needs become apparentto more people. “The problem’s still there, the sys-
tem size is still there, the number ofbridges are still there, and the fundingis still declining,’’ said Kehoe, aRepublican from Jefferson City. State transportation commission
Chairman Stephen Miller said hebelieves Missourians understand theneed for more funding, but he said theelection shows “there just isn’t anyconsensus on how to pay for it.’’ Construction contractors, labor
unions, engineering firms and otherswho stood to benefit from increasedtransportation spending poured more
than $4 million into the campaign forthe sales tax. They had outspent oppo-nents by a more than 100-to-1 ratioheading into the final weeks of thecampaign. The opposition consisted of general
anti-tax activists, as well as others whofeared the sales tax could hit the poorthe hardest while demanding nothingfrom heavy highway users such astrucking companies. The defeat is “an opportunity to con-
tinue the conversation and come upwith a funding mechanism that makessense and includes trucks in some fash-ion,’’ said Thomas R. Shout Jr., a St.
Louis consultant who was treasurer ofthe opposition group. Missouri voters approved several
other proposed constitutional amend-ments. They overwhelmingly passed ameasure adding electronic data, such ascellphones, to the items covered by thestate’s existing warrant requirementsfor police searches and seizures. Voters also approved a constitutional
amendment enhancing the state’s rightto bear arms. The ballot technically featured a race
for Missouri auditor, but incumbentTom Schweich was unopposed in theRepublican primary and faced noDemocratic opposition. All five ofMissouri’s eight U.S. House memberswho faced primaries defeated chal-lengers with significantly less namerecognition and money.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
“The problem’s still there, the system size is stillthere, the number of bridges are still there,and the funding is still declining.’’
Mike KehoeMissouri State Senator
CNH Industrial N.V. and Case Construction Equipmentannounced it is investing $24 million to expand productionin Burlington, Iowa, with the addition of the company’s MSeries crawler dozer production line. The expansion will cre-ate approximately 50 full-time jobs. Preparations will beginlater this year and production on the new line is expected tobegin in the second half of 2015.“Burlington is very familiar territory for Case dozers,”
said Jim Hasler, vice president of Case ConstructionEquipment, North America. “Earlier models were producedin Burlington prior to the acquisition of the Calhoun, Ga.,plant. Our new M Series dozers are experiencing highdemand and we have plans in place to ensure availability aswe transition production.”The machines are currently produced at the Calhoun plant,
which will close in the third quarter of 2015 as the companystreamlines its construction operations.Moving the production line to Iowa is consistent with
CNH Industrial’s long-term strategy to optimize its manu-facturing footprint and achieve a lean, flexible industrialoperation that delivers best-in-class response to the CNHIndustrial brands’ customers around the world. The produc-tion transfer is contingent upon completion, and approval, ofall state and local incentives and grants.The production facilities will include a new dedicated
paint line, welding and computer numerical control (CNC)machining equipment, and a dedicated assembly line. TheBurlington plant, home to more than 600 employees, hasmanufactured equipment for CNH Industrial’s brands since1937. In addition to producing Case ConstructionEquipment, the plant’s employees produce agriculturalequipment for the company’s Case IH and New Hollandbrands.For more information, visit www.CaseCE.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Case Invests $24Mfor Burlington,Iowa, Expansion
CNH Industrial N.V. and Case Construction Equipmentannounced it is investing $24 million to expand pro-duction in Burlington, Iowa, with the addition of thecompany’s M Series crawler dozer production line.
Hydraulic 6-in-1 Blade Takes Productivity to New LevelKubota Tractor Corporation’s hydraulic
6-in-1 blade for the KX040-4 compact exca-vator is now available at authorized Kubotadealerships nationwide. Operators can nowtilt the blade to six different positions, mak-ing leveling and backfilling — even oninclines and uneven terrain — easier.Operators will benefit from improved effi-ciency and greater productivity, according tothe manufacturer.“No matter how you look at Kubota’s
hydraulic 6-in-1 blade, it says productivity,”said Keith Rohrbacker, Kubota constructionequipment product manager. “That’sbecause Kubota has added performanceenhancing features such as a load-sensinghydraulic system, perfectly matched speedbalance, power balance and outstanding dig-ging force that continues to make Kubota’sKX-Series an industry leading compactexcavator.“The KX040-4 with the hydraulic 6-in-1
blade is ideal for contractors looking for 5-ton power in a 4-ton machine with easieroperation,” said Rohrbacker. “Kubota hastapped more than 40 years of engineeringexperience to design the 6-in-1 blade, mak-ing it a true productivity enhancer and amore rewarding operating experience.”
Easier Operation, GreaterEfficiency, Maximum ProductivityKubota’s new hydraulic 6-in-1 blade
allows operators to save time and work moreefficiently. The blade’s capacity hasincreased almost 0.75 cu. yds. (.6 cu m) overthe standard blade, and now enables six dif-ferent positions: left-end up, right-end up,left-end forward, right-end forward, raised,and lowered. Just by moving the dozer lever,operators can angle the blade right or left topush soil aside while the machine moves for-ward, eliminating the need for repetitiveright-angle positioning while backfillingtrenches. The operator can command all sixfunctions simultaneously for more conven-ient landscaping, shaping and backfillingcontrol.Additionally, contractors can operate the
rocker switch on top of the blade control totilt the blade 10 degrees up or down, andnow simultaneously twist the control handleto angle the blade 25 degrees left or right.
This feature makes it ideal for con-tractors to dig ditches easily, flat ortilted. The angle blade also allowsoperators to work efficiently in con-fined spaces, alongside walls andnear busy roads.At 5 ft. 10.9 in. (1.7 m) wide,
the blade stretches across theentire machine width, even whentilted. The tilt function gives con-tractors the flexibility to shapefoundation edges for runoff, andthen complete the job with slopesand swales for ample waterdrainage and a professional look.To keep the soil out of the space
between the blade and the tracks,the 6-in-1 blade is wider andextends past the track width by 2in. (5 cm) on each side. The 6-in-1 blade angles a wide 25degrees to help the soil easilyslide off into the trench, improv-ing backfilling time by as muchas 35 percent.
Reduce OperatingCosts and Tackle Eventhe Toughest JobsDesigned with a stan-
dard-equipped, durable bolt-on cutting edge (BOE) thatprotects the blade duringheavy-duty dozing operations,the 6-in-1 blade is ideal for thetoughest jobs in the most con-fined spaces. The tilt cylinder iscovered for added durability and increasedprotection from soil and rocks. Thereversible cutting edge is divided into twosections to easily invert the edge for contin-ued use, easy maintenance and simplereplacement. According to Rohrbacker,Kubota customers provided initial feedbackstating that the two-piece bolt-oncutting edge will significantlyreduce their operating costs dueto its versatile design.The dozer blade’s thick side
plates improve the tie-downpoint’s durability and allow con-tractors to use them as liftingpoints, along with the lifting point
on top of the boom for convenient 3-pointcraning of the KX040-4. Additionally,the float feature design makes groundfinishing work quick and easy with-out having to adjust the dozer
height. After backfilling, con-tractors can simply travelbackwards along the
covered ditch with the dozer in the floatposition to put the finishing touch on a back-filled trench.For more information, call 888/4-KUBO-
TA or visit www.kubota.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Pages 53-59For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com
SECT IONAttachments
Business Wire PhotoThe optional hydraulic 6-in-1 blade for Kubota'sKX040-4 compact excavator is now available atauthorized Kubota dealerships nationwide.Loaded with performance enhancing features suchas a load-sensing hydraulic system, the blade isperfectly matched for speed balance, power bal-ance and digging force.
Page 54 • August 16, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
501 NG Gives Operators Greater Power-to-Weight Ratio In 1969, the legendary Montabert BRH 501 hydraulic
breaker revolutionized job sites worldwide, largely displac-ing popular air compressed demolition tools of the era.Today, the French attachment manufacturer presents the all-new, redesigned Montabert 501 Next Generation (501 NG)hydraulic breaker to commemorate its invention of the firstfully hydraulic concrete breaker more than 45 years ago. Despite undergoing a 30 percent reduction in overall
weight, the 1,610-lb. (730 kg) 501 NG hydraulic breaker is75 percent more powerful than its predecessor — providingaggregates producers, as well as construction and demolitioncontractors, with a superior power-to-weight ratio.Designed for use with backhoe loaders and excavators
weighing between 17,637 and 39,683 lbs. (8,000 and 18,000kg), the all-purpose hydraulic breaker delivers up to 870 blowsper minute — demolishing oversized boulders and thick con-crete with ease. The 501 NG falls within the 2,000 foot-poundimpact energy class and requires a hydraulic flow rate ofbetween 21 and 37 gallons per minute (79.5 and 140 L). Standard performance-improving features include an
energy recovery system that captures and recycles recoilenergy from the piston to increase strike power and a blank-fire protection system that reduces harmful metal-to-metalcontact. In addition, the 501 NG hydraulic breaker’s upperand lower suspension system extends the carrier’s work-group life by absorbing harmful vibrations and stress waves.Optional features include an air pressurization kit for under-water applications, as well as an automatic, cradle-mountedgrease station that delivers continuous oil flow, reducingbushing and tool wear.
In comparison to hydraulic breakers of similar size, the501 NG requires minimal maintenance activity, increasingoperator productivity. The breaker’s simple design — char-acterized by fewer wear parts and devoid of tie rods —enables operators to more efficiently complete routine main-tenance on site and with standard tools, including thereplacement of the breaker’s bushing. The breaker’senclosed heavy-duty housing unit further protects workingparts from debris damage, while reducing noise levels on thejob site. Working tools available for the 501 NG include a general
purpose moil, a blunt tool and a chisel. The Montabert 501NG hydraulic breaker is covered by a limited one-year war-ranty. For more information, visit www.montabert.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Designed for use with backhoe loaders and excava-tors weighing between 17,637 and 39,683 lbs. (8,000and 18,000 kg), the all-purpose hydraulic breakerdelivers up to 870 blows per minute.
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • August 16, 2014 • Page 55
Page 56 • August 16, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • August 16, 2014 • Page 57
Whatever Your Application: RECYCLING • LOGGING • CONSTRUCTION • AQUATIC • WASTE HANDLING • DEMO • SCRAP • ROAD & BRIDGEWe Have Your Attachment: GRAPPLES • BUCKETS • CRUSHERS • RAKES • SHEARS • FORKS • CUSTOM ENGINEERING
CLICK OR CALL TODAY! PEMBERTONATTACHMENTS.COM • 1-800-393-6688
No matter what your material, Pemberton has the bucket, grapple or forks to handle it and we can fit it to your specific wheelloader or excavator. We have the attachment you need for construction, demolition, logging and scrap material or waste handling.
Got MATERIALSto Move?
Contact Pemberton today to see how we can help you maximize your equipment and your manpower.
®
visit: www.digrock.come-mail: [email protected]
call to order:866-928-5800 or 508-829-4855
"Leader in Excavator Rock Ripping Attachments"eadingdge
ttachments,
Inc.
Multi-ply Your Money!®
with the excavator rock ripping
Multi-Ripper BucketMulti-Ripper BucketMulti-Ripper
TM
Maximize forceone tooth at a time,using our patented
"Shanks on an Arc"technology.
6 to 9 times the forceof a standard 5 tooth bucket
4 times faster than a hammer
As seen on
Discovery channel’s
#1 hit show
“Gold Rush”
Multi-RipperBucket
Hi-CapMulti-Ripper
Bucket
Page 58 • August 16, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
Designed for use on a variety of carriers — includingcompact excavators, backhoe loaders and skid steer loaders— the Montabert Micro CPA drilling attachments are thefirst of their kind in North America, but have been used allover the world in pipeline trenching, utility work, tiebacks,reinforcement and long-reach applications.The Micro CPA H22/H25 drilling attachments, along with
the Micro CPA R25/R32, are single-pass drills with a feedrotation of 45 degrees from vertical. They create holes withdiameters measuring 1 to 1-3/4 and 1-1/4 to 3 in. (2.5 to 4.4and 3 to 7.6 cm), respectively, with maximum hole lengthsof 20 and 30 ft. (6 and 9 m). Both models can be mounted to
carriers in the 5- to 10-ton (4.5 to 9 t) range.The Micro CPA 360
R25/R32 drillingattachments areequipped with 360-degree rotation, allow-ing the operator toadjust from vertical, tooverhead, to horizontaldrilling with ease. TheR25/R32 provides a 1-3/4 to 3 in. hole diame-ter, with maximum holelengths of 30 ft. and canbe mounted to carriersin the 8- to 15-ton (7.2to 13.6 t) range. All Micro CPA
drilling attachments usea high performanceMontabert Drifter andfeature radio remotecontrol capabilities,allowing the drillingattachment to be operat-ed from outside the cabof the carrier and elimi-nating potential carrierconnection issues. Anoptional dust collector,with high suctioncapacity or a water
injection system, is available to reduce the dust escape. In addition to requiring less initial investment than their
conventional drilling counterparts, the Micro CPA drillingattachments offer the versatility of being quickly exchangedfor other attachments within minutes and are more easilytransportable between job sites. For more information, visit www.montabert.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
First of Their Kind...
Montabert RevealsMicro CPA Line ofNew Attachments
The Montabert Micro CPAdrilling attachments are thefirst of their kind in NorthAmerica, but have been usedall over the world in pipelinetrenching, utility work,tiebacks, reinforcement andlong-reach applications.
Bobcat excavator operators will beable to grab larger, more irregular-shaped material and perform more effi-cient grading tasks with the new BobcatPro Clamp system. The optional ProClamp system will expand the Bobcatexcavator clamp attachment family forM-Series models including the E32i,E32, E35i, E35, E42, E45 and E50.The Pro Clamp system consists of a
base that attaches to an M-Series exca-vator bucket and is equipped with pin-on adjustable standard tool orreversible grading tool. With enhancedfunctionality, the Pro Clamp systemwill add greater versatility to contrac-tors performing applications in con-struction and demolition, site develop-ment, landscaping and logging opera-tions. Both tools can be easily removedif desired to maximize visibility intotrenches and provide unlimited bucketcurl for reaching above truck heightwhen loading material.
Standard Tool Grabs Larger Material
The standard tool’s adjustabledesign allows it to be pinned in a posi-tion that provides traditional grabbingperformance similar to the existingBobcat excavator clamp. For greater
performance, it also can be pinned at ahigher point on the base to provide awider jaw and more aggressive grab-bing action for handling bigger materi-al such as larger-diameter utility pipe,boulders and logs. The tool also offersgreater range to follow the bucket far-ther towards material roll-out.
Grading Tool Cleans Trenches Faster
The 24-in. (61 cm) Pro Clamp grad-ing tool is reversible, allowing for dualfunctionality. With the grading toolpinned in the forward position on the
bucket, it provides a smooth cuttingedge on the bottom of a trench thateliminates the need for a secondsmooth lip bucket. When the gradingtool is pinned in the reverse position onthe bucket, it is designed for faster tran-sitions from cleanup areas to dumptrucks by removing spoil piles quickerand reducing manual shoveling.For more information, visit
www.bobcat.com.(This story also can be found on
Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)
Bobcat Expands Clamp AttachmentFamily With New Pro Clamp System
The Pro Clamp system consists of a base that attaches to an M-Seriesexcavator bucket and is equipped with pin-on adjustable standard toolor reversible grading tool.
Minnich Manufacturing’s series of machine-mounteddrills are now available with a number of features engi-neered to increase safety and productivity in dowel-pindrilling applications, and are available in both hydraulicand pneumatic options.Primarily used for full-depth repair, or “patchwork,”
Minnich Manufacturing offers excavator/backhoe/skidsteer-mounted units that are ideal for horizontal patch-work jobs with a relatively long distance between theareas to be drilled. Apart from increased portability, thedowel pin drills also are a safe alternative for operators,eliminating fatigue by utilizing the carrier to transportthe drill, according to the manufacture. Minnich’s pneumatic machine-mounted drills are
powered by a compressor, mounted to the counter-weight of the carrier or in the bucket of a backhoe, offer-ing a self-contained solution for patchwork jobs. Manypatchwork jobs require the work to be done in high-traf-fic areas, which make it of the utmost importance to uti-lize a highly mobile carrier and drill combination. For more information, visit www.minnich-mfg.com.(This story also can be found on Construction
Equipment Guide’s Web site at www.constructionequip-mentguide.com.)
Minnich Dowel Pin Drills Now Available
Minnich’s pneumatic machine-mounted drills are poweredby a compressor, mounted to the counter-weight of the car-rier or in the bucket of a backhoe, offering a self-containedsolution for patchwork jobs.
Murphy Tractor AnnouncesGarrison as New SalesmanMurphy Tractor & Equipment Co. Inc.,
has announced the addition of KirbyGarrison as the territory sales manager innorthwest Kansas. Garrison will be based out of the Dodge
City, Kan., store location and will be respon-sible for new and used heavy constructionequipment, attachments and trailer sales.With two years of experience in the con-
struction equipment industry, Garrison islooking forward to getting started in his newrole. “I am eager to get out there and meetthe customers in my territory and establishstrong relationships with them.” He has spent several years in sales in a
variety of industries, which is why TerryStefan, branch manager, Dodge City, Kan.,is confident he will excel. “Kirby is native tothe area. He has extensive sales experience,including a solid financial background andwe are very excited to have him here,”Stefan said.Murphy Tractor and Equipment
Company Inc., one of John Deere’s largestNorth American construction equipmentdealer organizations, is headquartered in
Park City, Kan. The organization has 28locations throughout the mid-western statesof Iowa, Kansas, Missouri, Ohio,Pennsylvania and Nebraska. For more information, visit www.mur-
phytractor.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Kirby Garrison
PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996
ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!
www.bretec.com
Make an Impact.
All Bretec-models are fully CE compliant
MAKE AN IMPACT WITH BRETEC
tt fac-arof-the-etstaeakers cec bretll BrA
ec brethe BrTinlandy in Fort. Brtomplianome fully CE ceakers c
omprange ceaker full rec brk bases its operorwec's global netet. Br
eakers suitable ises of bromprtion out of ak bases its oper
omplianeakers suitable tion out of
fully CE cecetll BrA
tompliane dels ar-mo
Wnquiries Dealer I
.timetion ensurof installa
on tiers 1,2 trom carfrtt fac-arof-theetsta
t sctacon, please comeelcWWelc
ety Brert each and eve thation ensurtrony cualit. Qonso 40 ton tec brethe BrT. inlandy in Fort
ou make yveaker will haec bretom the facesses frocol prtr
omprange ceaker full rec br
etec.brwwww.br
om, 404-345-3716.cvison@sandvik
t in no ing an impacou mako the point up tighy rortom the fac
eakers suitable ises of brompr
fully CE c
.cometec
t in no t
eakers suitable
e an ImpacMak
omplian
. te an Impac
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • August 16, 2014 • Page 59
Page 60 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Once Completed, Plant Will Turn Crude Oil Into Dieselpany MDU Resources Group Inc., based inBismarck, N.D., and Calumet SpecialtyProducts, an Indianapolis-based refiningcompany. MDU Resources Group Inc. isheading up the infrastructure expertise andlocal ties, while Calumet Specialty ProductsPartners brings refinery experience. Principal Technology is working with
Ventech Engineers North America LLC ofHouston, the primary equipment and tech-nology provider on the project, to supply theSulfur Recovery Units, according to infor-mation from Principal Technologies Inc.Once completed, the plant will turn crude
oil that is being pumped from the Bakken oilfield in western North Dakota into diesel forlocal truck and equipment markets and forother hydrocarbon byproducts. Throughout the course of the project
about 400 people will be employed. Oncethe plant is up and running it is anticipatedthat 90 will be employed. The DPR facilityis expected to be functional 24 hours a daywith employees working two 12-hour shifts.It’s also projected to emit close to 125,000tons (113,398 t) of carbon dioxide per yearinto the atmosphere, though officials haveindicated that potential odors from the top-ping plant are not expected to be an issue forDickinson or neighboring South Heart resi-dents, said Tim Rasmussen, MDUspokesperson. Due to the oil boom in western North
Dakota on the Bakken Formation, thedemand for diesel has increased tremen-dously in the area at 53,000 barrels a day andis expected to reach 75,000 barrels a day by2025, according to information fromPrincipal Technologies Inc. To meet the cur-rent demand, more than half of North
Dakota’s diesel is being brought in fromrefineries in nearby states like Montana andMinnesota.The majority of the diesel is used to power
the trucks and trains needed to move crudeoil and materials. Railroad use has increaseddue to the oil boom and is a critical mode oftransportation since the existing pipeline net-works are overwhelmed by the increase ofoil from the Bakken Formation. Rail is usedto move out more than 100,000 barrel eachday of crude from the Bakken. It also takes about 3,000 gal. (11,356 L) of
diesel each day to power one drill rig. As ofJune 2014, there were 193 active rigs in thestate.In addition to the 20,000 barrels of oil to
be produced, 7,000 barrels of diesel fuel willbe produced each day to meet the needs ofNorth Dakota. The remaining petroleum willbe shipped to other refineries for further pro-cessing, according to information fromPrincipal Technologies Inc. The Dakota Prairie Refinery is just one of
several proposed refineries in North Dakotaand the first to begin construction. Thestate’s only current refinery is located 223miles southeast of Dickinson in Mandan,N.D., and recently expanded diesel produc-tion to 71,000 bpd. It is owned by TesoroCorp. North Dakota, however, still won’t beclose to supplying enough diesel to meet itsown needs. The Dakota Oil Processing proj-ect is expected to fill 252,000 gal. (953,923.8L) per day, or about 10 percent of the state’scurrent diesel needs, according to informa-tion from Tesoro. Work began in November 2013 on a $400
million MHA Nation Clean Fuels Refineryby the Three Affiliated Tribes near Makoti,N.D., on the Fort Berthold Reservation. Thisplant is to be capable of turning 20,000 bar-
rels a day of Bakken crude into diesel fuelpropane and naphtha.A fourth proposed project in East
Fairview, N.D., by Quantum Energy Inc.would construct a 20,000 barrel-per-dayrefinery west of Watford City near theMontana border. Also, Dakota Oil Processing is proposing
a 20,000 barrel-per-day refinery in Trenton,N.D., which has been in the planning stagessince 2007. Construction of the DPR plant near
Dickinson is on track even though the begin-ning of the construction process was delayedsome by a wetter than usual spring,Rasmussen said. Currently, crews nearDickinson are constructing storage tanks andthey are working on the maintenance build-ing, which was 70 percent complete as oflate March. The administrative building, which hous-
es 20 employees, is complete, while themaintenance/warehouse building was 70percent complete as of late March. “It is the largest enclosed structure on the
grounds, said plant manager Dave Podratz.Wisconsin native Podratz was recently hiredas the future plant manager at the DakotaPrairie Refinery. Podratz will lead the orga-nizational development, start-up and com-missioning process of the refinery.As of early March, 52 of the 89 positions
available at the new plant had been filled, oroffers were in the works, Rasmussen said. “Those who have been hired, mostly
management and supervisory, are creatingthe processes for the plant once it is opera-tional.” The control room was 30 percent com-
plete and is located next to the tank farm onthe plant grounds, and the pipe rack, made ofstructural steel, was 53 percent completed.
The pipe is used to connect the various pro-cessing facilities.The project is more than half complete
and is on track for commissioning to beginthis fall, with the anticipated startup inDecember, according to Rasmussen. A wetspring in 2013 when the project begancaused some delays but in the fall of 2013crews were able to accomplish below-ground work that allowed crews to workthrough the winter on above-ground work,even though it was a colder than averagewinter. “Some large enclosures were built to pour
the concrete in order to be able to workthrough the winter,” Podratz added. The new diesel processing plant requires
the construction of 18 storage tanks, whichare to be complete by mid-July.The tanks are slated for various uses and
range in size from 1,000 to 40,000 barrelcapacity and three are for crude oil storage ata capacity of 75,000 barrels each. The threecrude oil tanks are complete. The other tankswill hold the final produce of diesel,kerosene and naphtha, while the 1,000 barreltank is for demineralized water.General Contractor Westcon Inc. of
Bismarck, N.D., which specializes in refin-ery-related construction throughout theUnited States, used a couple of large cranesand a crawler crane to put the crude towersin place, according to Podratz. Crews used anumber of screw piles, rather than first dig-ging a hole to construct piles, and screwedthe piles in for some of the lighter loads.Ventech Engineers, the primary equip-
ment and technology provider, is construct-ing the refinery modules in a shop in Texas.Westcon installs them once they are deliv-ered to the site.
The $300 million Dakota Prairie Refinery (DPR) is a 50-50 partnership betweenenergy company MDU Resources Group Inc., based in Bismarck, N.D., and CalumetSpecialty Products, an Indianapolis-based refining company.
Delivery of the crude oil distillation tower began on Nov. 6, 2013, in Taiwan andended Jan. 21 at the entrance of the Dakota Prairie Refining facility.
REFINERY from page 1
see REFINERY page 70
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 61
Howell Tractor480 Blaine StreetGary, IN 46406800/852-8816
Fax: 219/977-4220
Illinois Truck & Equipmentwww.iltruck.com320 Briscoe DriveMorris, IL 60450
815/941-1900Fax: 815/941-1486
Mid CountryMachinery
3478 5th Ave South (Bus. Hwy 20)
Fort Dodge, IA 50501800/206-5936
4734 Sergeant Rd. (Hwy 63)
Waterloo, IA 50701319/234-8710
106 8th StreetSergeant Bluff, IA 51054
712/943-4470
Custom Truck & Equipment
www.customtruckandequipment.com7701 E. 24 Highway
Kansas City, MO 64125800/861-1065816/241-4888
Fax: 816/241-8826
2121 Stephens BlvdJoplin, MO 64804
417/659-8969Fax: 417/659-8871
Kelbe BrothersEquipment Co., Inc.
www.kelbebros.com12770 W. Silver Spring Drive
Butler, WI 53007262/373-2151
Fax: 262/373-2102
4621 Dutch Mill RdMadison, WI 53716
608/221-8300Fax: 608/221-0610
3101 French Rd.De Pere, WI 54115
920/343-6496Fax: 262-781-9671
Grand EquipmentCompany
www.grandequipment.com3310 Hudson Trail Dr.Hudsonville, MI 49429
616/896-7700Fax: 616/896-6700
ConstructionMachinery Company
www.cmcky.com2911 S. English Station Rd.
Louisville, KY 40299502/267-4020866/901-2262
Fax: 502/261-9251
2235 Ragu DriveOwensboro, KY 42303
270/683-2000877/683-2262
Fax: 270/683-3727
267 W. Jay Louden Rd.Carrollton, KY 41008
502/732-4661Fax: 502/732-8355
Page 62 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2300 Cassens DriveFenton, MO 63026
(636) 343-9970www.lubyequipment.com
Cape Girardeau(573) 334-9937
Springfield (217) 744-2233
Quincy (217) 222-5454
Caseyville(618) 397-9971
50 East Kingston Ave.Columbus, OH 43207
614-443-6541www.columbusequipment.com
Perrysburg(419) 872-7101
Cincinnati(513) 771-3922
Richfield(330) 659-6681
Cadiz(740) 942-8871
Dayton(937) 879-3154
Canton(330) 453-4521
Zanesville(740) 455-4036
Painesville(440) 352-0452
Piketon(740) 289-3757
7355 East 30th St.Indianapolis, IN 46219
(317) 544-3411Fax: (317) 544-3420
www.westsidetractorsales.com
Bloomington, IN(812) 333-9677
Fax: (812) 333-9731
Fort Wayne, IN(260) 482-8576
Fax: (260) 483-4057
LaFayette, IN(765) 447-6933
Fax: (765) 448-9038
South Bend, IN(574) 232-1461
Fax: (574) 233-3324
4301 North Cliff Ave.Sioux Falls, SD 57104
(888) 753-8907
3801 North Deadwood Ave.Rapid City, SD 57702
(800) 658-3047
39288 133rd St.Aberdeen, SD 57401(888) 484-6312
www.dieselmachinery.com
4100 Gardner Ave.Kansas City, MO 64120
(816) 241-9290(816) 241-1738www.vlpco.com
Joplin(800) 878-8223(417) 781-8222
Springfield(800) 955-2729(417) 887-2729
Wichita(800) 878-3346(316) 838-3346
Topeka(800) 878-4345(785) 267-4345
Garden City(800) 511-1435(620) 275-1996
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 63
www.kubota.com©Kubota Tractor Corporation, 2008
Construction Equipment From the Ground Up.
2216 N. Green Bay Rd.Waukegan, IL 60087
847/336-1205Fax 847/336-2697
27939 W. Concrete Dr.Ingleside, IL 60041
815/363-4100Fax 815/363-4109
2001 Cherry Hill Rd.Joliet, IL 60433815/464-6650
Fax 815/464-6951
Burris Equipment Co.Anoka, MN
888/448-5266753/323-1720Shakopee, MN877/753-6100952/445-6310
Corcoran, MN888/479-4342763/479-8200
Lano Equipment, Inc.
2202 S. High CrossRoad
Urbana, IL 61802800/798-1772
Fax: 217/337-1775
2900 E. Jackson St.Macomb, IL 61455888/360-9225
200 North St.Prophetstown, IL
61277877/221-0881
Birkey’s Construction Equipment
124 N. Schmale Rd.Carol Stream, IL 60188
630/510-6050Fax 630/510-6051
1305 Sentry DriveWaukesha, WI 53186
262/521-5802Fax 262/521-5801
1st ChoiceEquipment LLC
3333 W. Coliseum Blvd.Fort Wayne, IN 46808
260/483-8868
4951 West 96th StreetIndianapolis, IN 46268
317/872-4877www.southeasternequip.com
SoutheasternEquipment Co., Inc.
29 Pearl Rd.Brunswick, OH 44212
888/572-3888Fax: 330/220-4949
3825 Chester Rd.Avon, OH 44011440/934-7368
www.abcequipment.com
ABC Equipment
Page 64 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
A new Gehl skid loader was delivered to thegrounds of University Wisconsin-WashingtonCounty, in West Bend, Wis., as a donation fromManitou Americas Inc.“We are delighted to donate a new Gehl R190
compact skid loader to the University Wisconsin-Washington County,” said Dan Miller, CEO ofManitou Americas Inc. and president of the ManitouGroup CE-compact equipment division. “With a history in West Bend dating back to 1859,
Manitou Americas is honored to be affiliated withUW-WC and work together as a part of our commu-nity. We have the right equipment to help theUniversity maintain the campus grounds and areproud to be able to assist them.”The Gehl skid loader is used on the premises to do
multiple landscape projects on the grounds of theUniversity. Some of the projects the skid loader hasbeen put to use include: hauling and spreadingmulch, digging out stumps, clearing snow from lotsand sidewalks and unloading heavy pallets.UW-Washington County’s dean, Dr. Paul Price said, “The
donation of the Gehl skid loader is a tremendous benefit toour campus maintenance.” He added that the “Gehl equipment is dependable and
very versatile, so it is used extensively by the maintenance
staff. Price said, “The donation is a wonderful demonstrationof the importance that The Manitou Group places on educa-tion in our community. We thank Dan Miller and Manitoufor their continued support.”
(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)
Manitou Donates New Gehl SkidLoader to University of Wisconsin
Dan Miller (R), CEO of Manitou Americas and president of theManitou Group CE-compact equipment division, hands overthe keys to a new Gehl R190 skid loader to UW-WC CampusDean Paul Price.
By Matthew PenningtonASSOCIATED PRESS
WASHINGTON (AP) The U.S.State Department proposed July 11that Asian nations not build new out-posts or expand existing ones in theSouth China Sea to help lower the riskof a conflict as tensions mount in itsresource-rich waters. Meanwhile the Senate passed a res-
olution urging all nations to refrainfrom “destabilizing activities’’ andexpressing U.S. commitment to free-dom of navigation in the Asia-Pacific. Speaking at a Washington think
tank, senior State Department officialMichael Fuchs voiced great concernover the “increasingly tenuous situa-tion’’ as an assertive China and five ofits smaller neighbors vie for control oftiny islands and reefs in waters withplentiful fisheries and potentialhydrocarbon reserves. Fuchs said no claimant was solely
responsible for the tensions, but criti-cized a pattern of “provocative’’behavior by China. He detailed a proposal for a volun-
tary freeze on activities which esca-late tensions, to flesh out a 2002 dec-laration by China and the Southeast
Asian bloc that calls for self-restraintin the South China Sea. The UnitedStates is expected to push the propos-al at a gathering of Asian foreign min-isters in Myanmar in August. Fuchs said the claimants them-
selves would need to agree on theterms, but suggested stopping estab-lishment of new outposts and anyconstruction and land reclamation thatwould fundamentally change existingoutposts. He also proposed that oneclaimant should not stop another fromcontinuing long-standing economicactivities in disputed areas. Simmering tensions in the South
China Sea have spiked since earlyMay, when China deployed a large oilrig close to the disputed Paracelislands, triggering a continuing stand-off with Vietnam. In mid-June, thePhilippines said it would call for aregion-wide moratorium on construc-tion after China began building aschool on the largest island in theParacels to serve the children of mili-tary personnel, two years after itestablished a city there to administerthe vast area it claims. China rejected the suggestion. It
said its maritime and territorial claimshave a historical basis, and it is reluc-
tant to embrace regional solutions forwhat it views as bilateral disputes.Other claimants are Brunei, Malaysiaand Taiwan. Fuchs said the proposed freeze on
activities could help dial down ten-sions and smooth the way for negoti-ations on a legally binding — andlong-delayed — code of conduct. But China objects to what it con-
siders the U.S. interference in the mat-ter. Washington, which plans $156million in assistance for SoutheastAsian nations for building their mar-itime capabilities over the next twoyears, maintains it is impartial in thesovereignty disputes but has an inter-est in their peaceful resolution. The bipartisan Senate resolution
passed July 10 calls for the peacefulresolution of territorial and maritimedisputes, and reaffirms U.S. defensetreaty obligations with the Philippinesand Japan — which is locked in a sep-arate dispute with China over unoccu-pied islands in the East China Sea,which lies further north.
(This story also can be found on
Construction Equipment Guide’s Web
site at www.constructionequipment-
guide.com.)
Construction Halt Eyed in South China Sea
BRANDEIS MACHINERY & SUPPLY COMPANYwww.brandeismachinery.com1801 Watterson Tr.Louisville, KY 40299502/491-4000502/499-3195 Fax Evansville, IN812/425-4491812/425-1171 Fax Corbin, KY606/528-3700606/528-9014 Fax Lexington, KY859/259-3456859/254-0783 Fax Stanville, KY606/478-9201606/478-9208 Fax Paducah, KY270/444-8390270/575-4907 Fax Indianapolis, IN317/872-8410317/872-8417 Fax Ft.Wayne, IN260/489-4551260/489-1620 Fax
CONTINENTAL EQUIPMENT CORP.A division of AISwww.ceceq.com3600 N. Grand River Ave.Lansing, MI 48906517/321-8000Fax: 517/321-4191
ROAD BUILDERSMACHINERY & SUPPLY CO., INC.1001 S. 7th St. TrafficwayKansas City, KS 66105913/371-3822913/371-3870 FaxOmaha, NE402/331-9200Lincoln, NE402/325-0447Grand Island, NE308/384-2620
ROAD MACHINERY & SUPPLIES CO.www.rmsequipment.com5633 W Hwy 13Savage MN 55378952/895-9595800/888-9515Duluth, MN 218/727-8611800/888-9535Virginia MN218/741-9011800/752-4304Des Moines IA515/282-0404800/555-1445Sioux City IA712/252-0538800/633-9104Cedar Rapids IA319/363-9655800/616-6615Milan, IL309/787-1742800/633-9114
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 65
www.komatsuamerica.com
LOADERSFrom Komatsu - The Loader Experts
.komatsuamerica.comwww.komatsuamerica.com
ROLAND MACHINERY CO.www.rolandmachinery.com816 N. Dirksen Parkway,Springfield, IL 62702217/789-7711Bolingbrook, IL630/739-7474Carterville, IL618/985-3399Marengo, IL815/923-4966Portage, IN219/764-8080Escanaba, MI906/786-6920906/786-5813 Fax Bridgeton, MO314/291-1330Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056DePere, WI920/532-0165920/532-0526 Fax DeForest, WI608/842-4151608/842-4193 Fax Eau Claire, WI715/874-5400715/874-5401 Fax Franksville, WI 262/835-2710262/835-2844 Fax Schofield, WI715/355-9898715/241-0044 Fax
GENERAL EQUIPMENT & SUPPLIESwww.genequip.com4300 Main AveFargo, ND 58103800/437-2924701/364-2190 Fax 905 20th Avenue SEMinot ND, 58701800/825-04793500 Apple Creek RoadBismarck, ND 58504800/279-44374082 2nd Ave. WWilliston, ND 58801701/572-0570
Page 66 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
PIRTEK Reports Second Quarter Earnings IncreasePIRTEK, a service provider of on site hose
replacement, noted second quarter growth of 25percent revenue increase compared to the sec-ond quarter of 2013. So far this year, the com-pany has added three franchise locations:Houston, Texas; Tucson, Ariz.; and St. Louis,Mo. PIRTEK now has 48 hose service centers
across the country and will celebrate the openingof its 50th center in Baltimore, Md., in October.Before the end of the year, the franchise hasopenings scheduled in Birmingham, Ala.; SanAntonio, Texas; Grapevine, Texas; and Detroit. PIRTEK’s 2014 goals include new market
development in Florida, California, Texas, Ohio,Tennessee, Illinois, Wisconsin, Missouri,Kansas and North Carolina. PIRTEK also hastwo corporate resale opportunities in the LosAngeles area. The company’s Inland Valley location had a
record-breaking March with revenue of$140,000, which was a 125 percent increasefrom the previous year. PIRTEK’s commercesouth location, with revenue of $111,000, saw a13 percent increase from 2013. For more information, visit
www.pirtekusa.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
The company’s Inland Valley location had a record-breaking March with revenue of $140,000, which was a 125 percentincrease from the previous year.
SiteWatch iPad App Optimizes Access to Equipment DataFurther empowering construc-
tion companies to improve pro-ductivity, run more efficientlyand decrease maintenance costs,Case Construction Equipmentannounced the introduction of itsSiteWatch app for the iPad.Whether in the field, on the roador on vacation, the SiteWatchapp provides business ownersand fleet managers with in-depthperformance, productivity andmaintenance data — convenient-ly delivered to their iPad. The SiteWatch iPad app pro-
vides actionable information tohelp manage fleet maintenance,optimize machine perform-ance/utilization, lower fuel con-sumption and idle time, andlower total operating costs.Among its features, theSiteWatch app provides the abil-ity to:• Review fleet details and
locate machinery• Review and create geofences• Check utilization and work-
ing status durations (idle status,high-workload status, etc.)
• Review the status of alarmsreceived within a selected timeperiod• Review and analyze fuel
consumption• Monitor machine health
through the report of key param-eters set within the Web applica-tionSiteWatch employs an
onboard communication devicethat monitors the machine’sCAN-bus network and transmitsdata to a designated user’s Webportal. Much of the Case equip-ment lineup now comes telemat-ics-ready (check with your localdealer for availability), and athree-year advanced subscriptionis included with each new pur-chase as part of Case’s ProCareheavy machinery coverage. CaseN Series backhoes come stan-dard with SiteWatch. For more information, visit
CASEce.com.(This story also can be found on
Construction Equipment Guide’sWeb site at www.construc-tionequipmentguide.com.)
SiteWatch employs an onboard communication device that monitors the machine’s CAN-bus networkand transmits data to a designated user’s Web portal.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 67
Authorized Terex Cranes Distributors
With over 100 years of experience and a commitment to speed, Terex Cranes focuses on getting the job done, aiming at maximum uptime and a high return on investment. Because your results are what really matters.
Contact our distributors and find out how we can help to improve your bottom line.
Copyright 2014 Terex Cranes. All rights reserved. Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries.
For Your Local Terex Dealer, Please Contact: Terex USA, LLC106 12th St. SE
Waverly, IA 50677 USAPhone: (319) 352-3920Fax: (319) 352-9395
email: [email protected]: www.terex.com/cranes
RTL Equipment Inc.(RT-T-HC/CC-AT)
www.rtlequipment.com3000 SE Gateway Drive
Grimes, IA 50111515-986-0262
Fax: 515-986-0267
2601 120th St. NWSwisher, IA 52338
319-857-4045Fax: 928-441-1269
Custom Truck &Equipment
(RT-T-HC/CC-AT-BT)7701 Highway 24
Kansas City, MO 64125800-861-1065
www.cte-equipment.com
All Erection & Crane Rental Corp.(RT-T-HC/CC-AT-BT-Towers)
www.allcrane.com4700 Acorn Dr.
Independence, OH 44131800-232-4100
Fax: 216-642-7633
BRANCH LOCATIONSAll Crane Rental of PA, LLC
Pennsylvania412-382-4200
All Crane & Equipment Rental Corp.West Virginia
304-766-0300
Dawes Rigging & CraneRental, Inc.
Wisconsin414-453-5335
Jeffers Crane Service, Inc.Michigan
419-693-0421
Page 68 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Authorized Doosan Dealers
ILLINOISLuby Equipment
Quincy217-222-5454
www.lubyequipment.com
INDIANARonson Equipment Co. LLC
Lowell219-696-5680 • 866-350-5538
www.ronsonequipment.com
IOWABrown’s Heavy Equipment, Inc.
Ames515-232-8456 • 800-723-5460
www.brownsheavyequipment.com
RTL Equipment, Inc.Grimes
515-986-0262Swisher
319-857-4045www.rtlequipment.com
KENTUCKYBobcat of Bowling Green
Bowling Green270-842-4253
www.bgbobcat.com
MICHIGANCarleton Equipment Co., Inc.
Byron Center616-877-3388Chesterfield586-463-3333Kalamazoo
269-343-2943 • 888-380-6420Livonia
734-421-9999Saginaw
989-777-6666www.carletonequipment.com
MINNESOTALano Equipment, Inc.
Shakopee952-445-6310 • 877-753-6100
www.lanoequip.com
MISSOURIBobcat of St. Louis
Columbia573-886-9435Valley Park
636-225-2900 • 800-782-0854 www.bobcatofstl.com
Luby EquipmentCape Girardeau
573-334-9937www.lubyequipment.com
NEBRASKABobcat of Omaha
Omaha402-895-6660
www.bobcat-omaha.com
NORTH DAKOTAIronhide Equipment
dba Bobcat of Devils LakeDevils Lake701-662-5331
dba Bobcat of Grand ForksGrand Forks701-772-5006
dba Bobcat of WillistonWilliston
701-572-5050www.goironhide.com
OHIOBobcat Enterprises, Inc.
Cincinatti513-874-8945 • 800-589-2281
Hilliard614-876-1116
www.bobcat-ent.com
Gibson Machinery LLCCleveland
440-439-4000www.gibsonmachinery.com
SOUTH DAKOTADiesel Machinery, Inc.
Aberdeen605-725-4364 • 888-762-6312
Rapid City605-348-7438 • 800-658-3047
Sioux Falls605-336-0411 • 800-456-4005
www.dieselmachinery.com
WISCONSINSwiderski Equipment, Inc.
Antigo715-623-4668
Mosinee715-693-3015
Thorp715-669-5255
Waupaca715-258-3266
Wausau715-675-2391
www.swiderskiequipment.com
ANADIIN.ctnempiuqeylub.www
4545-222-712ycnuiQ
npmeiu Eqyy EqbuLOISINLIL
sreal Deanoso DdzeirohtAu
b.www402
cabBoEBRN
mo.c
tn
omc.ahaom-tacobb0666-958-402
ahOmahaam Off O ott oca
AKSAEBR
semirG In,tnpmeiu EqLTRmpuiqyevaehsnwobr.www3270-0 8 •6458-232-515
smeApmeiu Eqyy Eqvea Hs’nwoBr
WAOItnmepiuqennsoor.www
503-66 8 •086-5696-912llewoL
Ctt Co.npmeiu EqnosnoRANADIIN
www07
oa Bbd07
Gboa Bbd
07Deboa BbdhnoIrRON
c. Inmoc.tnem
6045-3
c. In,tnpme
moc.t835-550
CL L Co.
mocedihnoiro.gw50-5027-510
notsilliWnotsillif Wt oacbo
60-50277-10skrod FnarG
skrod Fnarf Gt oac1335-2661-0
kea LslivDeekas Llivef Dt oac
tnpmeiu EqediTAOKA DHTR
Cttnpmeiu EqnotelrCaNAIGHMIC
mco.tabcobbg.www3524-248-027neer GgniBowl Ggnilw Bof otcabBo
YUCKTENKc.tneipmuqeltr.www
54047-58-913rehsiwS2620-689-515semirG
bsoigwww44
nosGib
www6
4-87-8315
ttcabBo
www
c. In Co.
m
neer G
mo
mocyreniachmnbso0004-943-04danlevleC
CL Lyreinhca Mn
mo.ctne-tacbo.bw6111-678-41
drailliH1822-985-0 80 •5494-8
ittaincinCc. In,seisrpret En
IOHO
moc.edihnoiro.gw
ATTAOSNNEIMnempiuqetonelarc.www
6666-777-989nawigaS
9999-124-437ainvoLi
83 888- •3492-343-962oozmaalaK
3333-364-865dlefiretsehC88337-78-616retne CnyroB Ctt Co.npmeiu EqnotelrCa
W
id.www0-633-560S7-8435-06R4-527-506
leseiDOUS
bsoig.www
Amoc.tn
0246-0
c. In, Co.
NSINCOSI
mo.cyrenihcalmese5004-6450-0 8 •1140
sllax FuoiS7403-586-00 8 •3847
yti CidapR2136-267 888- •4634
deenrebAc. In,yrenicha M
ATTAOKAH DTOU
moc.yreniachmnbso
co.tlsfotabcob.www287-00 8 •0092-5226-36
kray PellaV5349-68-8375
aibolumCuo. Ltf St oacboB
IROUSSIMmoc.ipuqeona.lwww357-77 8 •013-6544-259
eeopkSha,tnpmeiu EqonaLATTAOSNNEIM
7
7
17
7
17
ksrediwSW
mco4580-2
siu
m001-63
c. InA
1 932-756-51ausauW
6623-5825-1acapauW5525-9665-1
prhoT1503-396-15
eensioM8664-623-51
oigtnAc. In,tnpmeiu Eqik
NSINCOSI
.ctnempiuqeylub.www7399-43-3735
uaedrari GeapCnpmeiu Eqyy EqbuL
diws.www7
mo.c
utn
moc.tenmpiuqeiskred1 93275651
Imposed Vibration, BlastingLimitations Impact Project
the cab space, which creates a comfortablework environment thus maximizing workerproductivity on the job. Both Nancy Cole-Allen and Kristie Allen are impressed withthat fact that Furukawa engineers were inter-ested enough in learning about their businessand how they might improve their drills thatthey’ve visited with the company on job sitesfor a firsthand look at their drills in action. HTA Enterprises’s relationship with the
people at Construction Machinery Company(CMC) goes back to the eighties and Cole-Allen feels that their relationship is like apartnership, adding that the service and sup-port they’ve provided over the years hasbeen outstanding. Cole-Allen is confidentthat with Gerald Fox on board, her companyhas one of the best mechanics in the region.She added that CMC’s mechanic, EddieStreier as every bit Fox’s match, and the two
work exceptionally well together. Much ofthe company’s growth and ongoing successis attributed to a winning combination of theright tools operated and serviced by the rightpeople, Cole-Allen added.Construction Machinery Company is a
full service dealer with locations inLouisville, Carrollton, and Owensboro, Ky.The company provides sales of both newand used equipment, service, parts andrentals serving Kentucky’s construction, util-ities, mining and farming markets. As well as Furukawa rock drills, CMC is
an authorized dealer for Link-Belt,Kawasaki, Terex-Finlay, Midland, Yanmar,McClanahan, Terrasource, Joy Global,Superior brooms, Allied, Dynapac,Hydroram and JLG/Skytrak.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.) CEG
HTA Enterprises is using five FurukawaHCR1500 rock drills on the Kentucky side andtwo Furukawa HCR 1500 rock drills and twoHCR900 rock drills on the Indiana side of theproject.
Given the logistics, the company faced two primarychallenges on the job site; first, traffic, and second,the unique operating requirements as a conse-quence of the site location.
OHIO from page 18
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 69
44 TONS OF PAY DIRT.
DoosanEquipment.com/44Tons11Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2014 Doosan Infracore Construction Equipment America. All rights reserved. | 0814158
With industry-leading body capacity in every weight category, it delivers top performance and speeds up to 34 miles per hour in the toughest working conditions. A front-mounted turning ring, unique sloping frame and free-swinging rear tandem bogie suspension provides maneuverability and sure-footed stability that brings your productivity to its full potential.
Page 70 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Caterpillar has a new approach to helping customers mon-itor, control and manage equipment while increasing job siteefficiency. Cat Equipment Management Solutions(EMSolutions) is a portfolio of tiered service offerings builtto help manage equipment assets and lower operating costs— whether the customer performs maintenance tasks or theCat dealer handles the details.EMSolutions is supported by Product Link technology
that collects data directly from the fleet and presents sum-mary data to managers via VisionLink. The system promotesmaking good decisions based on equipment location, fuelburn, utilization and more.The five levels of EMSolutions are progressive, ranging
from basic connectivity to machine electronic control mod-ules (ECMs) through dealer-delivered condition monitoringservices such as fluid sampling, and on to complete, proac-tive management of the fleet.• Level 1: The Access suite of technologies provides con-
nectivity that delivers equipment location and operating sta-tus to the equipment manager’s computer or handheld devicein real time. The local Cat dealer can provide training to helpmanagers get the most out of equipment data.• Level 2: Inform includes fleet summary reports from the
Cat dealer to show managers equipment health and utiliza-tion trends compared to similar fleets in the region. • Level 3: Advise includes a dedicated condition monitor-
ing advisor looking after the fleet and providing expert rec-ommendations so managers can make informed decisionsabout maintaining and using machines. • Level 4: Support preventive maintenance services from
the local Cat dealer help lower operating costs while increas-ing machine availability. • Level 5: Manage lets site and fleet managers focus on
their business while the Cat dealer ensures optimal fleet per-formance, availability and lifecycle planning.Using these defined service levels, customers can work
with Cat dealers to choose the support they want to helpmanage their equipment and improve the bottom line. For more information, visit www.cat.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Cat EM Solutions Offers CompleteTiered Services
A technician draws an oil sample.
First Year of Construction Sees 40,000Man-Hours Worked During Night, Day
“The level of logistical control ofthis project is like a fine Russian balletgoing on on the prairie,” Rasmussensaid. “The scheduling and the logisticalcontrol of this is a testament of somestrong construction management that istaking place. We sit here and say theproject is 49 percent complete while weare coming off of one of the most bru-tal winters in recent history. That is atestament of some pretty controlledmanagement.” In order to access the area on the
318-acre property where the tank farmis located, crews first needed to build abridge. “The Heart River runs toward the
front of the site and there was no otherway to get to the site so crews had tobuild a bridge, which was started earlyduring the course of the project andcompleted in September, 2013,”Podratz said. “It is a concrete bridge,sturdy enough to supports the heavyequipment and the 100-ton crude oildistillation tower.”The crude oil distillation tower was
delivered in January, beginning its trekin Taiwan on a custom-made trailerwith 92 tires, at a maximum speed of35 mph, Rasmussen said. “We considered this a milestone
because that is a central piece of refin-
ery equipment and getting that deliv-ered and constructed is a key milestonefor us.”Delivery of the crude oil distillation
tower began on Nov. 6, 2013, inTaiwan and ended Jan. 21 at theentrance of the Dakota Prairie Refiningfacility. The tower is the part of the firststep in the refining process and is usedto separate the crude oil into naphtha,distillate and other petroleum compo-nents, according to information fromMDU. These components will be fur-ther treated in the downstream refineryprocesses to produce various products,including diesel fuel for the local mar-ket in North Dakota.The tower is 140-ft. (42.6 m) long,
more than 14 ft. (4.2 m) in diameterand weighs more than 100 tons (90 t).The truck rig transporting the towerwas 225 ft. (68 m) long and requiredtwo truck tractors to pull it. The tower was loaded on a ship in
Taiwan and shipped across the PacificOcean through November and earlyDecember and passed through thePanama Canal on Dec. 13. It arrivedDec. 20 at the Port of Houston, where itwas loaded on a custom-designed trail-er for the 1,700 mi. (2,736 km) trip toDickinson, N.D., according to MDUinformation. In February, the tower was lifted into
place with two large cranes specificallyengineered for the task. “It took a little more than an hour
from the start of the lift to the finish toplace the tower on its concrete pad andsecure it with seven-foot bolts embed-ded in the concrete,” said Rasmussen. The administration building, which
is on the north of the 318-acre site, is asecure location. “The delivery trucks don’t go
through the security gate but they doneed to go over the bridge to get to thetank area,” Podratz said.During the first year of construction,
from March 2013 to March 2014,400,000 man-hours had been worked,Rasmussen said. Depending on whattask was being performed, crewsworked some overnights, partially tostay on task and partially for safetyconcerns. “Worker safety is a very high priori-
ty on this project and we have somevery good safety stats as our recogni-tion of this. We have had two OSHAreported injuries and have had no losstime injuries,” Rasmussen said. “Thatis phenomenal.”
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.) CEG
The tower is the part of the first step in the refining process and is used to separate the crude oil into naphtha,distillate and other petroleum components. These components will be further treated in the downstream refin-ery processes to produce various products, including diesel fuel for the local market in North Dakota.
REFINERY from page 60
By Dale MickleSPECIAL TO CEG
As costs for fuel, personnel, equipmentand regulatory compliance rise, the extrac-tion of resources from the ground in NorthAmerica is becoming more expensive andcomplex. Inefficiency in the mining processadds to the cost of doing business, and oftenis a result of unnecessary processing steps,extra handling and wasted material. Just about any mining application will fol-
low many of the same traditional processing
steps, whether it is hard rock mining, softrock mining or quarrying. After blasting orexcavating, large trucks transport the materi-al to primary and secondary crushing and/orgrinding and screening stages. Although theprocesses have remained the same fordecades, this practice of taking the rock tothe machine typically results in capitalexpenses from equipment purchases, as wellas wasted material, time and fuel — ulti-mately resulting in unnecessary cost. Itstands to reason, therefore, that anytime youcan reduce processing steps in mining, you
also are reducing time and cost.The influx of track-mounted crushers and
screens into North America has allowedsome operators to let the machine follow thematerial in a number of applications, reduc-ing haulage costs. But the technique stillrequires machinery to load, and additionalmachinery to crush and screen the material,which adds to fuel, personnel and capitalexpenditures.Taking the concept of bringing the
machine to the material one step further,there is an option for soft-rock mining that
has been developed by Allu Group. The AlluM-Series screener crusher attachment, foruse on excavators from 50 to 160 tons (45 to145 t) or wheel loaders from 30 to 90 tons(27 to 81 t), is allowing some mining com-panies to reduce from three or four separateprocessing steps — crushing, screening,mixing and loading — combining them intoone step. The result is a loading/processingmachine that also is highly mobile, accord-ing to the manufacturer.
Allu Attachment Eliminates Steps From Mining Process
Pages 71-85
Crushing, Screening & Recycling SectionFor more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.
Inefficiency in the mining process adds to the cost of doing business and often is a result of unnecessary processing steps, extra handling and wasted material.
see ALLU page 78
Paladin Makes Addition to Bradco Ground Shark LinePaladin Attachments has released the Bradco Ground Shark stan-
dard duty brush cutter — the newest addition to the Ground Sharkfamily. It builds on success of the original Ground Shark extremeduty brush cutter’s innovative deck design, aggressive machineprofile and high productivity, which is the fastest selling product forPaladin in the light attachment category, according to the manufac-turer.This attachment clears tough ground vegetation, light to medium
density brush and hardwoods up to 4 in. (10 cm) in diameter. A dualpressure relief valve on the new hydraulic motor is standard, pro-tecting against any pressure spikes that could damage the drive sys-tem. Three bi-directional blades cut in either direction to extend theoperational life of the blades, minimizing fleet maintenanceexpenses. The standard duty models share many of the engineering inno-
vations incorporated into the extreme duty version like a heavy duty¼ in. (.6 cm) steel deck, an extremely quiet drive train, and a shield-ed motor that protects it from falling debris and damage. They areavailable in three cutting widths: 60, 72 and 78 in. (152, 183 and198 cm) and in a variety of low and high flow GPM ranges toaccommodate the hydraulic capabilities of any skid steer loader.The addition of the optional pressure gauge is highly recom-
mended because it allows the operator to maintain peak perform-ance and prevent stalling. Optional dual steel wheel kits, mountedjust behind the front safety chains on the underside of the deck, helpprevent scalping. For more information, call 800/456-7100 or visit www.paladi-
nattachments.com.(This story also can be found on Construction Equipment Guide’s
Web site at www.constructionequipmentguide.com.)The Bradco Ground Shark standard duty brush cutter clears tough ground vegetation, light to mediumdensity brush and hardwoods up to 4 in. (10 cm) in diameter.
Crush. Classify. Profit.
CRUSHING PLANTS
Closed-circuit PLANTS
CRUSHING PLANTS
SCREENING PlantsWe Call It EXPERTISE. You Call It PEACE OF MIND.
IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers.
For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.
w w w . i r o c k c r u s h e r s . c o m
Page 72 • August 16, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 16, 2014 • Page 73
Right where you need us. Lokotrack® LT106™
Setting standards in mobility
The Lokotrack LT106 mobile jaw meets the demand for a compact plant with optimal transport dimensions and agile performance. A new hydraulic system, coupled with an environmentally friendly, low-emission engine and high inertia � ywheels, delivers excellent fuel e� ciency without compromising power or productivity. For more information, contact your local Metso distributor today
www.metso.com/lokotrack
3402 36th St. SWFargo, ND 58014
701-280-3100
800-726-7475
3630 Miriam Ave.Bismarck, ND 58501
701-223-0890
2803 I-94 BusinessLoop E
Dickinson, ND 58601701-456-1400
1201 S. 46th St.Grand Forks, ND 58201
701-775-4238
1505 Hwy 2, Bypass EMinot, ND 58701
701-852-3508
4950 E Highway 12Aberdeen SD 57401
605-225-6240
3601 Deadwood Ave. NRapid City, SD 57702
605-342-4850
20571 Truck Stop Ave.Pierre, SD 57501
605-224-5400
3201 N. Louise Ave.Sioux Falls, SD 57107
605-336-3010
RB SCOTT COMPANY INC.
www.rbscott.com1011 Short St.
Eau Claire, WI 54701715-832-9792
Fax: 715-832-7767
CENTRAL SERVICE
& SUPPLY, INC.www.centralsands.com
4219 E. 50th St.Des Moines, IA 50317
800-247-2400
515-964-8600
Fax: 515-309-0667
ROAD BUILDERSMACHINERY & SUPPLY CO.,
INC.www.roadbuilders
machinery.com
1001 S. 7th St. TrafficwayKansas City, KS 66105
913-371-3822
Fax: 913-371-3870
4115 S. 90th St.Omaha, NE
402-331-9200
5601 Fletcher Ave.Lincoln, NE
402-325-0447
4949 Juergen Rd.Grand Island, NE
308-384-2620
BUTLER MACHINERY CO.www.butlermachinery.com
3600 N. Grand RiverAve.
Lansing, MI 48906517-321-8000
Fax: 517-321-4191
www.aisequip.com
Grand Rapids600 44th Street S.W.
Grand Rapids, MI49548
616-538-2400
Fax: 616-538-0449
Northeast Detroit65809 Gratiot Avenue
Lenox, MI 48050586-727-7502
Fax: 586-727-7311
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
Traverse City8300 M-72 East
Williamsburg, MI 49690231-267-5060
Fax: 231-267-5257
West Detroit, MI56555 Pontiac Trail
New Hudson, MI 48165248-437-8121
800-457-8121
AIS CONSTRUCTION EQUIPMENT CORP.
Page 74 • August 16, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
CDE Global Embarks on New Phase ofDevelopment With Reveal of New R2500CDE Global has embarked on a new
phase of development with the intro-duction of a new R2500 dry screeningplant.The R2500 is a static primary
screening unit capable of processingmore than 500 tph (453 t) in quarrying,recycling and mining operations. It rep-resents an expansion to the CDE port-folio of products and broadens therange of services that CDE can pro-vide. It seamlessly integrates into anexisting or new washing system andensures an increase in efficiency imme-diately. The R2500 is electric resultingin a substantial saving in fuel costs anda quieter, more environmentally-friendly operation, according to themanufacturer.The R2500 has been designed at the
new CDE Innovation Centre at thecompany’s headquarters in NorthernIreland. Providing solutions to theworld’s leading global constructioncompanies ensures that CDE is con-stantly researching and developing newproducts, and a particular focus in 2013and early 2014 was the development ofequipment solutions capable of pro-cessing more than 500 tph. CDE recognized an opportunity to
increase the processing capability of itssolutions with the R2500 for those cus-tomers who require higher outputs.CDE Sales Director, Enda Ivanoff said,“We recognized an opportunity to bet-ter service our high tonnage markets inthe most efficient way and to provideour customers with a complete CDEsolution across the four sectors inwhich we operate; construction andrecycling, mining, environmental andindustrial sands.” The R2500 can be introduced to
quarrying, recycling and mining opera-tions where a range of difficult materi-als are being processed includingcrushed rock, topsoil, scalpings, ironore and construction and demolitionwaste.Features of the R2500 include a lam-
inate side-wall design on the ProGradeP2-75/R screen, which has zero weldsresulting in a stronger, lighter screenwhich requires less power and is galva-nized as standard. The lattice designscreen has a reduced mass and ensuresmore energy is transferred to the mate-rial guaranteeing superior screeningperformance. The ProGrade P2-75/Rscreen has FEA (finite element analy-
sis) verification, and is an integral partof the CDE range, featured on theR2500, M2500 and M4500. All FEAresults are verified with onsite physicaltesting procedures. Physical tests alsohave been carried out on the R2500within the dedicated ProGrade screentesting facility at CDE.
R2500: Sand and GravelCreagh Concrete is the largest land
based sand and gravel producer inNorthern Ireland.The sand and aggregates they pro-
duce at various locations are used in theproduction of a range of pre-cast prod-ucts as well as ready mix concrete. TheCreagh Concrete reserve is character-ized by heavily claybound materialwith approximately 30 percent waste.A modular CDE plant was installed in2012 and consisted of three modularcomponents from the CDE core prod-uct range — an AquaCycle A1500, anAggMax portable logwasher and anEvoWash sand washing plant.In early 2014, Creagh Concrete
introduced the new R2500 to its pro-duction as a primary screening unitdirectly feeding the CDE AggMax. TheR2500 seamlessly integrates with theother CDE modular plant items and itsmain function is to protect the CDEplant by screening off large stones andboulders and stockpiling this materialready for crushing. Creagh Concretehas already praised the design andfunctionality of the R2500. “The combination of processes on
one chassis really sets this machineapart from others on the market as itcan handle extremely rough material,like ours, with ease,” said ConorMcGlone, quarry manager, Creagh
Concrete. “With a 20 ton hopper capac-ity we are confident that the R2500 canmore than meet our processing require-ments. Overall the machine is fit-for-purpose, quiet and visually appealing.“Our raw material is among the
worst that I’ve seen and at the outset, in2012, all options were on the tableincluding ceasing production at ourDraperstown quarry and looking forreserves at a new site. The CDE planthas allowed us to continue working atthe existing site and the introduction ofthe R2500 has highlighted further effi-ciency improvements that we can maketo the washing plant.”
R2500: CD&E WasteRecycling
The R2500 also is operational in theStuttgart area in Southwest Germanysince May 2014. A new project,backed by the Eco-Innovation Fundfrom the European Union is operatingwith the aim of enhancing the infra-structure for the recycling of construc-tion, demolition and excavation wastein Europe. The project is a partnershipbetween CDE Global and the Eco-Innovation Fund and sees the introduc-tion of a new CD&E waste recyclingsystem, which includes the R2500, andwill deliver on a number of key objec-tives including reduced plant footprint,enhanced mobility and an increasedreturn on investment from CD&Ewaste recycling operations.For more information, visit
www.cdeglobal.com.(This story also can be found on
Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)
The R2500 is a static primary screening unitcapable of processing more than 500 tph (453 t)
in quarrying, recycling and mining operations.
3630 Miriam Ave.Bismarck, ND 58501
701-223-08907910 Highway 2W
Devils Lake, ND 58301701-665-3800
2803 I-94 Business Loop EDickinson, ND 58601
701-456-14003402 36th St. SWFargo, ND 58104701-280-3100800-726-7475
1201 S. 46th St.Grand Forks, ND 58201
701-775-423817040 Hwy 11
Hankinson, ND 58041701-242-7474
7695 Highway 18 S.Hoople, ND 58243
701-894-63631910 27th Ave SE
Jamestown, ND 58401701-251-1400
1505 Hwy 2, Bypass EMinot, ND 58701701-852-3508
4950 E. Highway 12Aberdeen, SD 57401
605-225-62401715 US Hwy 14 W.Huron, SD 57350605-353-1200
20571 Truck Stop Ave.Pierre, SD 57501605-224-5400
3601 Deadwood Ave. NRapid City, SD 57702
605-342-48503201 N. Louise Ave.
Sioux Falls, SD 57107605-336-3010
www.fabickcat.com
One Fabick DriveFenton, MO 64026800-845-9188
Foristell, MO800-539-9217Columbia, MO800-791-5401
Jefferson City, MO800-845-9177Springfield, MO888-959-2100Joplin, MO
866-313-1748Willow Springs, MO
866-628-1717Cape Girardeau, MO
800-845-9175
Marion, IL800-845-9179Metropolis, IL866-299-6044Salem, IL
800-845-9176Troy, IL
866-345-5681Mt. Carmel, IL888-769-7247
www.fabco.com
11200 W. Silver Spring Rd.Milwaukee, WI 53225
414-461-9100Fax: 414-461-8899
Madison, WI608-271-6200
LaCrosse, WI608-783-4891Eau Claire, WI715-874-5100Wausau, WI715-359-6220
Green Bay, WI920-498-8000Superior, WI715-398-9696Marquette, MI906-475-4191
www.zieglercat.com
MINNESOTABEMIDJI*
5426 Hwy 71 NorthBemidji, MN 56601877-829-9850BRAINERD
3311 Liberty LaneBrainerd, MN 56401
218-829-9800BUHL
10081 East Hwy 169Buhl, MN 55713218-258-3232COLUMBUS
13822 West Freeway DriveColumbus, MN 55038-9705
651-982-5600CROOKSTON720 3rd Ave SW
Crookston, MN 56716-0538218-281-4245
DULUTH210 Garfield Ave.
Duluth, MN 55802-2696218-722-6628FERGUS FALLS
3502 State Hwy 210 WestFergus Falls, MN 56537-4003
218-736-2680JACKSON
191 Industrial ParkwayJackson, MN 56143
866-847-6401MANKATO
2145 Howard Drive WestMankato, MN 56003
507-388-1444MARSHALL
1200 North Hwy 59Marshall, MN 56258-2761
507-532-4403MINNEAPOLIS
901 West 94th StreetMinneapolis, MN 55420-4236
952-888-4121ROCHESTER
6340 Hwy 63 SouthRochester, MN 55904-8414
507-285-1775
SHAKOPEE8000 County Road 101 East
Shakopee, MN 55379800-352-2812ST. CLOUD
2225 255TH StreetSt. Cloud, MN 56301-8742
320-253-2234IOWA
ALTOONA1500 Ziegler Drive NW
Altoona, IA 50009-7200515-957-3800
PARTS EXPRESS515-957-3843800-752-0856
ZIEGLER RENTAL1600 Ziegler Drive NWAltoona, IA 50009-7200
515-957-3828888-270-6258
Fax: 515-957-3881ATLANTIC
951 Park DriveAtlantic, IA 50022712-243-1039877-547-3819FORT DODGE
3366 5TH Ave. SouthFort Dodge, IA 50501-6428
515-576-3161800-342-1848MASON CITY
11490 265TH StreetMason City, IA 50401-9656
641-423-7240800-342-1849POSTVILLE
308 North LawlerPostville, IA 52162-7802
563-864-7461800-526-0889SHELDON
102 Crossroads DriveSheldon, IA 51201712-324-5604855-344-5604SIOUX CITY
5300 Harbor DriveSioux City, IA 51111-1114
712-252-4401800-342-1847*Parts and rental only
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 16, 2014 • Page 75
Committed to Uptime & Your Success
© 2014 Caterpillar • All Rights Reserved • Printed in USA, their resp T FOR IT T, their respective logos, “Caterpillar YTERPILLAR, BUIL LT FOR IT, CA ATERPILLAR, BUILTT, CACA
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Cat.com
© 2014 Caterpillar • All Rights Reserved • Printed in USA,” the “Power Edge”trade dress as well as ellow, their respective logos, “Caterpillar Y
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
www.ohiocat.com Cleveland, OH440-526-6200800-837-6200
Fax: 440-526-9513
Cadiz, OH740-942-4626800-837-6204
Fax: 740-942-4029Canton, OH
330-478-6525800-837-6207
Fax: 330-478-6529Cincinnati, OH513-771-0515888-332-4658
Fax: 513-672-7658Columbus, OH614-878-2287888-441-4658
Fax: 614-851-5015
Toledo, (Perrysburg) OH419-874-7975888-339-4658
Fax: 419-873-8255Troy, OH
937-335-7660888-330-4658
Fax: 937-335-6447Youngstown, OH330-530-9010800-837-6203
Fax: 330-530-9102Zanesville, OH740-453-0563800-837-6205
Fax: 740-452-3605Richwood, KY859-372-4665888-446-4658
Fax: 859-372-4659
www.whayne.com
1400 Cecil AveLouisville, KY502-774-4441
Ashland, KY606-928-3444
Bowling Green, KY270-843-3275Corbin, KY
606-528-3140Dry Ridge, KY859-823-1500
Evansville, IN812-425-4651Hazard, KY
606-439-4040Lexington, KY859-254-2756Paducah, KY
270-443-3631Pikeville, KY
606-437-6265
www.altorfer.com
2600 6th Street S.W.Cedar Rapids, IA 52404
319-365-0551Fax: 319-365-5639
4712 Buckeye St.Davenport, IA 52802
563-324-1935Fax: 563-324-2409
#1 Capitol Dr.East Peoria, IL 61611
304-694-1234Fax: 309-694-4148
4200 Rodger StreetSpringfield, IL 62705
217-529-5541Fax: 217-529-00201519 W. Kenyon Rd.Urbana, IL 61801
217-539-1671Fax: 217-359-63103520 Moberly Ave.Hannibal, MO 63401
573-221-8600Fax: 573-221-7187701 Highway 24WMoberly, MO 65270
660-263-8200Fax: 660-263-8203
www.macallister.com7515 East 30th St.
Indianapolis, IN 46219800-382-1896
Fort Wayne, IN800-944-0847South Bend
800-685-9849Lafayette, IN
800-283-4231Washington, IN800-932-5120Terre Haute, IN800-273-5650
Page 76 • August 16, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
1-800-952-0178
worldwide network of authorized Bandit dealers.processing equipment is a
s toughest,y’The industr
worldwide network of authorized Bandit dealers.vailable through the processing equipment is a
longest lasting woo s toughest,
ale th
od
boost your operation’ or rec, grinder r,,chipper,
Contact yours today and see how a Bandit
SMALL EQUIPMENT DEALERS
s bottom line.boost your operation’ler can help yc or rec
Contact yours today and see how a Bandit
USH CHIPPERS,(BRSMALL EQUIPMENT DEALERS
dit
AC) ARBORVVAC) STUMP GRINDERS,USH CHIPPERS,
1-800-952-0178
LARGE EQUIPMENT DEALERS
TREE CHIPPERS,WHOLE (BEASTT,LARGE EQUIPMENT DEALERS
Y MOWERS) FORESTRTREE CHIPPERS,
For large equipment inquiries in OH,
630-293-0606 ILgo,est ChicaW
708-596-8050 ILMokena,
ax: 847-678-3587F847-678-3633
IL 60176ark,Schiller P River Rd.5050 N.
M IA, , MN, IL, , IA, Y, KY,, IL, Y IL, Y, IL, IN, , KYFor large equipment inquiries in OH,
Little Canada,t.comtlasbobca.awww
630-553-0150 ILorkville,YYorkville,
847-526-4522 ILauconda,W
or if your region is not represented abo WI and MI, , or if your region is not represented abo MN,
877-331-0295651-407-3727
MN 55117Little Canada,3101 Spruce St.
877-262-2284952-894-0894
MN 55337Burnsville, Hwy 13.W1800
.tristawww
866-268-2418715-531-0801
Hudson,745 Exchange Drive
ve, or if your region is not represented abo
t.comtebobca.trista
866-268-2418715-531-0801
54016 WI Hudson,745 Exchange Drive
please call us or visit us online for assistance.ve,, please call us or visit us online for assistance.
304-534-5454 WVairmont,F
304-204-1818 WVLanes,Cross
304-255-1525 WV,ver,Bea
304-226-3299 WVwen,Co
please call us or visit us online for assistance.
lec1.com.www
304-204-1818 OHMarietta,
304-255-1525 WVPikeville,
304-226-3299 WVNorton,5050 N. River Rd.
Schiller Park, IL 60176847-678-3633
Fax: 847-678-3587
Mokena, IL708-596-8050
West Chicago, IL630-293-0606
Wauconda, IL847-526-4255
Yorkville, IL630-553-0150
www.atlasbobcat.com
1800 W. Hwy 13Burnsville, MN 55337
952-894-0894877-262-2284
3101 Spruce St.Little Canada, MN 55117
651-407-3727877-331-0295
745 Exchange DriveHudson, WI 54016
715-531-0801866-268-2418
NEW LOCATION COMING SOON!1200 East Hwy 13
Burnsville, MN 55337952-894-0894
www.tristatebobcat.com
Ashland, KY606-928-3477
Cowen, WV304-226-3299
Beaver, WV304-255-1525
Cross Lanes, WV304-204-1818
Fairmont, WV304-534-5454
Norton, WV304-636-6421
Pikeville, KY606-432-0321
www.lec1.com
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 16, 2014 • Page 77
Attachments can make your machine more valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. Allied has become attached to your machines. Allied’s construction and demolition attachments are productive and dependable. State-of-the-art technology.Full product line. Competitive price and performance.
Allied offers innovative, problem-solving capabili t ies. Commitment to product availability. Superior product support. Strong Distributor network. Most of all Allied meets and exceeds customer performance expectations. To put a high performance Allied attachment on your machine, call us at 1-800-321-1046 or visit AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your mach ines .
Attachments make machine valuable. Allied
© 2014 Allied Construction Products, LLC
www.iltruck.com320 Briscoe DriveMorris, IL 60450800-941-2133
Fax: 815-941-1486
www.howelltractor.com480 Blaine St.Gary, IN 46406800-852-8816
Fax: 219-977-63952770 May Rd.Peru, IL 61354815-224-3003
Fax: 815-224-2538
www.cmcky.com2911 S. English Station Rd.
Louisville, KY 40299502-267-4020 866-901-2262
Fax: 502-261-9251
2235 Ragu DriveOwensboro, KY 42303
270-683-2000 877-683-2262
Fax: 270-683-3727267 W. Jay Louden Rd.Carrollton, KY 41008
502-732-4661Fax: 502/732-8355
CONSTRUCTION MACHINERY COMPANY ILLINOIS TRUCK & EQUIPMENT HOWELL TRACTOR AND EQUIPMENT
Page 78 • August 16, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
M-Series Works for Number ofApplications in North America
A large screener crusher attachment (sizesrange from 5 to 11.1 cu. yd. [3.8 to 8.5 cu m])allows the operator to excavate and/or scoopROM or blasted soft rock material — fallingbetween 1 and 4 on the Mohs scale — andcrush it to desired size as it is being loadedonto a truck, conveyor or stockpile. At thesame time, the screener crusher attachmentcan screen out harder rock impurities orfines, which are then dumped into a waste orseparate material pile.
Powered by the carrier hydraulics throughan auxiliary circuit, the attachment requiresno additional fuel source to operate, and gen-erates no emissions of its own. Different pro-cessing drum configurations allow theattachment to be adapted from crushing toscreening to a combination of both, produc-ing fragment size configurations of 50, 75,100 and 150 mm. The attachment can be uti-lized in open pit, open cast and undergroundmines.
By screening, crushing and loading in onestep, the screener crusher attachment allowsmining companies to reduce capital expendi-tures by reducing the amount of equipmentneeded on site. Fewer machines and at-the-face processing also mean that haul fleet andprocessing machine wear and personnelcosts are reduced. And with production ratesup to 650 tph (590 t), the one-step processingalso is a time saver.
In North America, the M-Series is viablefor a number of soft rock applications,including coal, gypsum, salt, phosphate andoil shale/oil sands, as well as for some aggre-gate applications.
Coal ProcessingThe screener crusher attachment is used to
crush coal ROM at the same time that itloads the material into trucks, eliminating theneed for more costly crushing and screeningequipment. Because the coal is beingcrushed prior to haulage, it improves haulingefficiency by eliminating air voids in thetruck bed. At the secondary stage for coal,the attachment can be used to crush and feedat power plants, harbors and depots.
GypsumGypsum, mined from quarries or under-
ground mines, is typically hauled to a sta-tionary processing plant above ground. Ascreener crusher attachment can reduce thematerial size at the source, eliminating a pro-cessing stage and also increasing haulingefficiency. Set up as a fine screener, the
attachment can further break down the prod-uct and separate any hard impurities from thematerial.
SaltIn underground rock salt mines, screener
crusher attachments are used to crush mate-rial directly as it is loaded onto a conveyor.By completing one processing step at theloading stage below ground, it eliminates aseparate processing step at the surface.
PhosphateIn eastern U.S. phosphate mines, the
screener crusher attachment can be used atthe secondary stage, crushing the overrunsfrom the primary stage. The 4-in. (10 cm)plus overrun material is typically consideredto be a waste product. But there is enoughphosphate within the rock to make it worthliberating using the large screener crusher;the leftover rock (generally limestone) canbe sold as a secondary product. In the west-ern United States, the phosphate mined inIdaho and Utah requires extensive crushing,screening and grinding to liberate the mate-rial from the rock, also providing opportuni-ty for the screener crusher attachment toeliminate a step.
Oil Shale/Oil SandsThe first North American oil shale opera-
tion has only recently received permission togo online and produce 300,000 barrels as ademonstration of its capabilities. In otherparts of the world, the mine-sized screenercrusher attachment has been found to beespecially well-suited for processing oilshale in the production of kerogen. Becauseit can screen out the harder limestone thatoften is found with oil shale, the end productthat is loaded into haul trucks has alreadybeen refined and requires less processing.Additionally, more efficient loading of thedesired material allows the mine owner toreduce the number of trucks in the fleet.
AggregatesWhile the large screener crusher attach-
ments are capable of crushing softer aggre-gates, such as limestone and dolomite, formore efficient loading at the face, they alsohave possible use as a pre-screener of finesin harder stone such as granite, trap rock andbasalt.
For more information, visit www.allumin-ing.net.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.) CEG
ALLU from page 71
www.superior-ind.com
KING OF THE HILL
At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determi-nation and energized by progress. How can we help you?
Proud partners of General Equipment & Supplies
Fargo, ND4300 Main Ave.Fargo, ND 58103800-437-2924Local: 701-282-2662Fax: 701-364-2190
Sioux Falls, SD3902 N Jessica Ave.Sioux Falls, SD 57104Local: 605-336-9000Fax: 605-336-0073
Bismarck, ND3500 Apple Creek RoadBismarck, ND 58504800-279-4437Local: 701-223-9700Fax: 701-223-4815
Shakopee, MN4600 Valley Industrial Blvd SShakopee, MN 55379800-966-1455Local: 952-224-1500Fax: 952-224-1570
Minot, ND905 20th Ave. SEMinot, ND 58701800-825-0479Local: 701-852-0479Fax: 701-852-1451
Williston, ND4082 2nd Ave. W.Williston, ND 58801Local: 701-572-0570Fax: 701-572-0510
Official dealer partner of Superior Industries in North Dakota, South Dakota, Minnesota, Iowa & Nebraska
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 16, 2014 • Page 79
Purpose-builtfrom the ground up byMaterial handlers from SENNEBOGEN – 44,000 lbs. to 750,000 lbs.
Simple design… Lift more. Move faster. Save fuel. Run longer. , 0 0 0 44 . , l0 0 0 0 75 7 o ts b l .sbl
S i m p l e d e
e s i g n … L i ft ft mor
re . Mov e faster.
. Sa v e f u e l . Ru n
n longer.
Muskegon, MI231-798-8754
Kentwood, MI616-698-2960
Battle Creek, MI269-965-1269
New Hudson, MI248-356-5200
Romulus, MI734-641-8238
Saginaw, MI989-752-9400
Sterling Hts, MI586-977-6000
Traverse, MI231-943-3700
Zeeland, MI616-748-4108
Lansing, MI517-272-5033
Wixom, MI (Cons. Division)248-356-5200
Byron Center, MI616-878-7450
Louisville, KY 502-491-4000
Evansville, IN812-425-4491
Corbin, KY606-528-3700
Lexington, KY859-259-3456
Stanville, KY606-478-9201
Paducah, KY270-444-8390
Indianapolis, IN317-872-8410
Ft.Wayne, IN260-489-4551
HOWELL TRACTOR &EQUIPMENT
LLCwww.howelltractor.com
Gary,IN800-852-8816
Peru, IL800-342-6072
GIBSON MACHINERY
LLCwww.gibson
machinery.com
Cleveland, OH440-439-4000
Pittsburgh, PA 724-695-5000
MURPHYTRACTOR &EQUIPMENT
CO.murphytractor.com
Cincinnati, OH800-844-3734
Vandalia, OH800-233-4228
Carterville, IL618/985-3399
Bridgeton, MO314-291-1330
Columbia, MO573-814-0083
Cape Girardeau,MO
573-334-5252
Palmyra, MO573-769-2056
Franksville, WI262-835-2710
DePere, WI920-532-0165
DeForest, WI608-842-4151
Eau Claire, WI715-874-5400
Schofield, WI715-355-9898
Escanaba, MI906-786-6920
THE VICTORL. PHILLIPS
CO.www.vlpco.com
Kansas City, MO 800-878-9290
Joplin, MO800-878-8223
Brookline Station,MO
800-955-2729
Wichita, KS800-878-3346
Topeka, KS800-878-4345
Garden City, KS 800-511-1435
Savage, MN 800-888-9515
Des Moines, IA 800-555-1445
Cedar Rapids, IA 800-616-6615
Sioux City, IA 800-633-9104
Milan, IL 800-633-9114
Duluth, MN 800-888-9535
Virginia, MN 800-752-4304
Bismark, ND800-247-1282
Dickinson, ND888-418-2873
Fargo, ND800-342-4330
Omaha, NE866-733-1100
Minot, ND701-852-3188
Rapid City, SD888-388-0266
Sioux Falls, SD800-262-5373
Williston, ND877-570-4635
Lincoln, NE866-801-6261
ALTA EQUIPMENT COMPANYwww.altaconstructionequipment.com
BRANDEIS MACHINERY & SUPPLY COMPANY
www.brandeismachinery.com
ROLAND MACHINERY CO.www.rolandmachinery.com
ROAD MACHINERY & SUPPLIES CO.
www.rmsequipment.com
TITAN MACHINERYwww.titanmachinery.com
Page 80 • August 16, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
terex.com/construction
Terex® Fuchs Material Handlers
ET A HG
ET A H
DNAET A H
LE OD
N LE O
T ® hs Ma Fuc
ET A HGOPER
terial Handlershs Ma
ET A HTAATOPER
DNAET A HINGT
LE OD COS
enn Jersey MacP
N LE OST COS
Chadwicyhinerenn Jersey Mac
k-BarossChadwic
or yot fliub-esopruPertahs mcu® FxereTTere
:ht wissensibu
% re1e 1gaervn a Areldnal haierta m
% l5e 4gaervn a A
erexTTerex® hs Ma Fuc
efsnar, tdrap yarcr suou gop yels herldnal haier
pmusnoel cud fecud% res
sernwf ot osoer cwo% l
terial Handlershs Ma
, dral ylir mn ooitatr ser uon ye oldnaet a hu g
tietpmos cusren voitp
s users vr0 h00t 1p aih
terial Handlers
e vi
s
enn Jersey MacP Deptford, N
47-66-22 85
htown, Nrenc F8-824-42000 9
A Lionville, P PA63-92000-3 61
Staten Island, NY
Chadwic Chelmsford, MA
00-8 8
Bangor00-6 8
Caribou, M00-2 8
e W Westbrook, M
yhinerenn Jersey MacJ Deptford, N00
Jhtown, N8-824-4200
A63-9200
Staten Island, NY
k-BarossChadwic Chelmsford, MA
5774-0000-8
E, M Bangor8838-4900-6
E Caribou, M740-25700-2
Eestbrook, M
titit
ldl hi
48 2448 4 71
0 8 Staten Island, NY
44
estbrook, M47100 262-5
SARGENTS EQUIPMENT& REPAIR SERVICEwww.sargentsequimpent.com
281 E. Sauk TrailChicago Heights, IL 60411
708-758-2062 • Fax: 708-758-1345
155 Industrial Dr.Gilberts, IL 60136847-844-4131
COMPANY WRENCHwww.companywrench.com
4805 Scooby Lane NWCarroll, OH 43112
866-262-4181 • Fax: 740-687-9130
Cleveland Branch525 Golden Oak Pkwy
Oakwood Village, OH 44146440-439-4567 • Fax: 440-439-1789
Piketon Branch3668 US Route 23 South
Piketown, OH740-289-3294
Cincinnati Branch3120 S. Verity Pkwy.Middletown, OH 45044
513-649-8105 • Fax: 513-649-8107
7019 Brookville Rd.Indianapolis, IN 46239
317-375-7790 • Fax: 317-375-7792
LUBY EQUIPMENTSERVICES
www.lubyequipment.com
2300 Cassens Dr.Fenton, MO 63026
636-343-9970 • Fax: 636-343-4811
199 Airport RoadCape Girardeau, MO 63702
573-334-9937
2999 Mexico Rd.O’Fallon, MO 63366
636-332-9970
2625 North 24th St.Quincy, IL 62305217-222-5454
4375 Camp Butler Rd.Springfield, IL 62707
217-744-2233
8853 Petroff Dr.Caseyville, IL 62232
618-397-9971
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 16, 2014 • Page 81
MC 110 Zi EVO MC 110 Ri EVO
Continuous Feed System High-tech jaw crusher Direct drive via fluid clutch
THE LEADER IN TECHNOLOGY: THE NEW MC 110 EVO
High production, quality product with maximum effi ciency, the all new Kleemann EVO jaw crusher.
www.wirtgenamerica.comROAD AND MINERAL TECHNOLOGIES
Springfield, Illinois816 N Dirksen ParkwaySpringfield, IL 62702Phone: 217-789-7711
Bolingbrook, Illinois220 East Frontage RoadBolingbrook, IL 60440Phone: 630-739-7474
Carterville, Illinois1505 Donna Drive
Carterville, IL 62918Phone: 618-985-3399
Marengo, Illinois18210 Beck RoadMarengo, IL 60152
Phone: 815-923-4966
Portage, Indiana6550 Melton RoadPortage, IN 46368
Phone: 219-764-8080
Escanaba, Michigan2600 S Lincoln RoadEscanaba, MI 49829Phone: 906-786-6920
DeForest, Wisconsin604 Stokely Road
DeForest, WI 53532Phone: 608-842-4151
DePere, Wisconsin3275 French RoadDePere, WI 54115
Phone: 920-532-0165
Eau Claire, Wisconsin7417 Margaret LaneEau Claire, WI 54703Phone: 715-874-5400
Franksville, Wisconsin2916 N Sylvania AveFranksville, WI 53126Phone: 262-835-2710
Schofield, Wisconsin9808 Weston AvenueSchofield, WI 54476Phone: 715-355-9898
Bridgeton, Missouri4670 Crossroads
Industrial Dr.Bridgeton, MO 63044Phone: 314-291-1330
Cape Girardeau, Missouri3364 Percy Drive
Cape Girardeau, MO63702
Phone: 573-334-5252
Columbia, Missouri4110 I-70 Drive SE
Columbia, MO 65201Phone: 573-814-0083
Palmyra, Missouri701 Industrial DrivePalmyra, MO 63461
Phone: 573-769-2056
Shepherdsville, KentuckyP.O. Box 6588
335 Saltwell DriveShepherdsville, KY 40165Toll Free: 877-538-3221Phone: 502-543-3746Fax: 502-543-3716
Evansville, IndianaFort Wayne, IndianaIndianapolis, Indiana
Corbin, KentuckyLexington, KentuckyLouisville, KentuckyPaducah, KentuckyStanville, Kentucky
Hayden-Murphy Equipment Company
www.hayden-murphy.com9301 E. Bloomington FreewayMinneapolis, MN 55420-3410
952-884-2301800-352-2757
Page 82 • August 16, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
IllinoisMidwest Crushing & Screening
7144 N Harlem Ave.Chicago, IL 60631
IndianaPowerscreen Indiana, Inc.
255 N Hetzler CourtAngola, IN 46703
www.powerscreenindiana.com313.841.8370
MichiganPowerscreen of Michigan
36639 Groesbeck Hwy.Clinton Township, MI 48035
www.powerscreenofmichigan.com586.229.2882
MinnesotaTheco, Inc.
5470 Quam Ave. NESt. Michael, MN 55376
www.thecoinc.com800.776.0335
OhioAGGCORP
22800 Lakeland Blvd.Cleveland, OH 44132
www.aggcorp.net614.309.6854
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 16, 2014 • Page 83
Integrity. Generation After Generation.After being in business for almost a century, we’ve learned a thing or two. We know what it takes to keep your operation running smoothly: Commitment from your crew, quality equipment that works as hard as you do, and people that you can count on. Generation after generation, we continue to meet the demands ofthe job by building innovative products. We’ve led the way since 1928, and that leadership shows through in the integrity of our team. We’re proud to still be doing business the way we did back then.
CRUSHING MATERIAL HANDLING
SCREENING
TRACKS
WASHING & CLASSIFYING
www.rmsequipment.com
q p
Genesis Attachments’ GSG scrap grapple is now availablein 10 sizes.Ranging in capacity from 0.5 to 2.5 cu. yds. (0.4 to 1.9 cu
m ), GSG grapples fit 22 to 88 ton (20 to 80 t) material han-dlers to meet a wide range of application needs.Designed to reduce maintenance, improve durability,
lower operating costs and enhance safety, Genesis ScrapGrapples feature:• Identical hardened steel bearings with dust seals at all
pivot points to keep out contaminants• A heavy-duty cylinder guarding system that protects the
cylinders and internal components and is easily removed formaintenance• Reverse-mounted cylinders that protect rods from dam-
age• Large-bore hydraulic cylinders to maximize clamping
force• Long-life, abrasion-resistant steel tips that are easily
replaced with a simple perimeter weld. Genesis also provides tine variety with flat- or point-tine
shapes in half- or narrow-width spades for high-volumescrap processing.For more information, call 715/395-5252 or visit gene-
sisattachments.com. (This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Genesis AttachmentsGSG Scrap GrappleAvailable in 10 Sizes
Ranging in capacity from 0.5 to 2.5 cu. yds. (0.4 to1.9 cu m ), GSG grapples fit 22 to 88 ton (20 to 80 t)material handlers to meet a wide range of applica-tion needs.
Brandeis Machinery& Supply Co.
www.brandeismachinery.com
28775 Beck Rd.Wixom, MI 48393(248) 449-6700
Fax: (248) 449-6701
2470 W. Columbia Ave.Battle Creek, MI 49015
(269) 965-1269Fax: (269) 965-1881
8840 Byron Commerce SWByron Center, MI 49315
(616) 878-7450Fax: (616) 878-7650
4716 Talon Ct. S.E.Kentwood, MI 49512
(616) 698-2960Fax: (616) 698-2901
6327 Jomar Ct.Lansing, MI 48917
(517) 272-5033Fax: (517) 272-7257
5920 Grand Haven Rd.Muskegon, MI 49441
(231) 798-9754Fax: (231) 798-9387
28855 Smith Rd.Romulus, MI 48174
(734) 641-8238Fax: (734) 641-8334
1524 Champagne Dr.Saginaw, MI 48604
(989) 752-9400Fax: (989) 752-9834
7500 E. 15 Mile Rd.Sterling Hts., MI 48312
(586) 977-6000Fax: (586) 977-6099
476 US 31 SouthTraverse, MI 49685
(231) 943-3700Fax: (231) 943-8110
56195 Pontiac TrailNew Hudson, MI 48165
(248) 356-5200Fax: (248) 356-2029
9433 Riley St.Zeeland, MI 49464
(616) 748-4108Fax: (616) 748-4120
Alta EquipmentCompany
www.altaequipment.com
Evansville, IN(812) 425-4491
Ft. Wayne, IN(260) 489- 4551
Indianapolis, IN(317) 872-8410
Corbin, KY(606) 528-3700
Lexington, KY(859) 259-3456
Louisville, KY502) 491-4000
Paducah, KY(270) 444-8390
Stanville, KY(606) 478-9201
CONTACT US TODAY FOR A PERSONAL DEMONSTRATION
Murphy Tractor & Equipment Co.www.murphytractor.com
5087 E. Broadway Ave.Des Moines, IA 50317-4744Toll Free: (800) 822-2212
1303 3rd Ave. NWFort Dodge, IA 50501-2257Toll Free: (800) 362-2487
4900 Harbor Dr.Sioux City, IA 51111-1106Toll Free: (800) 352-4693
3469 W. Airline HwyWaterloo, IA 50703-9594Toll Free: (800) 772-2019
10893 112 Rd.Dodge City, KS 67801-6585Toll Free: (800) 794-0172
325 S. Highway 281Great Bend, KS 67530-9621Toll Free: (800) 264-4056
5255 N Deere RdPark City, KS 67219
Toll Free: (800) 262-0139
1621 NW Gage Blvd.Topeka, KS 66618-2831
Toll Free: (800) 279-6087
1410 W. Oklahoma Ave.Ulysses, KS 67880
Toll Free: (800) 472-9238
8600 NE Parvin Rd.Kansas City, MO 64161-8300
Toll Free: (888) 306-3434
1401 S. State Highway MMSpringfield, MO 65802-7726
Toll Free: (888) 306-2656
220810 Hwy 92Gering, NE 69341-5236
Toll Free: (800) 205-6784
3204 S. Engleman Rd.Grand Island, NE 68803-6621
Toll Free: (800) 868-4017
6100 Arbor Rd.Lincoln, NE 68517-3211Toll Free: (800) 416-5518
3701 S. Jeffers St.North Platte, NE 69101-7844
Toll Free: (800) 894-7060
9751 S. 148th St.Omaha, NE 68138-3898
Toll Free: (800) 416-5095
1240 Industrial Pkwy N.Brunswick, OH 44212-4317Toll Free: (800) 716-9796
60611 Hulse Rd.Cambridge, OH 43725-8937
(740) 439-2747
1509 Raff Rd. SWCanton, OH 44710-2321Toll Free: (866) 235-0438
5775 US Highway 23Chillicothe, OH 45601-9562
(740) 663-5300
11441 Mosteller Rd.Cincinnati, OH 45241-1829Toll Free: (800) 844-3734
2121 Walcutt Rd.Columbus, OH 43228-9575Toll Free: (800) 222-2010
3550 Saint Johns Rd.Lima, OH 45804-4017
Toll Free: (800) 423-7445
811 Callendar Blvd.Painesville, OH 44077-1218Toll Free: (866) 800-1398
590 E. Western Reserve Rd. Bldg 3Poland, OH 44514-3393Toll Free: (866) 503-7259
1015 Industrial Park Dr.Vandalia, OH 45377-3117Toll Free: (800) 233-4228
20400 Route 19Cranberry Township, PA 16066
(724) 776-3636
1973 Route 66Greensburg, (Delmont) PA 15601-9297
(724) 837-4500
Page 84 • August 16, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 16, 2014 • Page 85
Lokotrack ST2.8 mobile scalping screen
Lokotrack ST3.5 Lokotrack ST2.4 Lokotrack ST4.8Lokotrack ST4.8
Meet any screening challenge.challenge.
Lokotrack® mobile screensWhatever your application, there is a Lokotrack® ST Series mobile screen that can handle it. Metso offers the widest selection of high capacity, dependable screens to meet any challenge, from aggregates processing to demolition and recycling.
easy operation
Contact your local Metso distributor today.
www.metso.com/lokotrack
3402 36th St. SWFargo, ND 58014
701-280-3100
800-726-7475
3630 Miriam Ave.Bismarck, ND 58501
701-223-0890
2803 I-94 BusinessLoop E
Dickinson, ND 58601701-456-1400
1201 S. 46th St.Grand Forks, ND 58201
701-775-4238
1505 Hwy 2, Bypass EMinot, ND 58701
701-852-3508
7910 Highway 2 WDevils Lake, ND 58301
701-665-3800
4950 E Highway 12Aberdeen, SD 57401
605-225-6240
3601 Deadwood Ave. NRapid City, SD 57702
605-342-4850
20571 Truck Stop Ave.Pierre, SD 57501
605-224-5400
3201 N. Louise Ave.Sioux Falls, SD 57107
605-336-3010
BUTLER MACHINERY CO.www.butlermachinery.com
AIS CONSTRUCTION EQUIPMENT CORP.
www.aisequip.com
3600 N. Grand River Ave.Lansing, MI 48906
517-321-8000
Fax: 517-321-6275
Grand Rapids600 44th Street S.W.
Grand Rapids, MI 49548616-538-2400
Fax: 616-538-0449
Northeast Detroit65809 Gratiot AvenueLenox, MI 48050
586-727-7502
Fax: 586-727-7311
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
Traverse City8300 M-72 East
Williamsburg, MI 49690231-267-5060
Fax: 231-267-5257
West Detroit, MI56555 Pontiac Trail
New Hudson, MI 48165248-437-8121
800-457-8121
CENTRAL SERVICE
& SUPPLY, INC.www.centralsands.com
4219 E. 50th St.Des Moines, IA 50317
800-247-2400
515-964-8600
Fax: 515-309-0667
Page 86 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Ditch Witch’s RT120 Quad is a utility tractor with thepower, heavy-duty frame and traction necessary for longinstallations of large-diameter pipe on the most challengingjob sites, according to the manufacturer.The RT120 Quad is built around a heavy-duty undercar-
riage designed to withstand punishing ground conditions andprovide years of reliable service. The frame is engineered totilt, enabling the RT120 Quad to dig a vertical trench onuneven ground.The machine rides on a quad track system that provides
stability and traction. Each track frame weighs 1,500 lbs.(680.4 kg) each (including track), giving the RT120 Quad alower center of gravity for increased stability and drawbar,while the chevron-pattern tracks provide maximum tractionin wet conditions and on slopes. The RT120 Quad also fea-tures a ground clearance of 15.5 in. (39.4 cm), enabling themachine to be more productive around bar ditches, creekbeds and uneven terrain.Powering everything is a Deutz diesel engine that adds to
the machine’s long-term productivity. The four-wheel-driveRT120 Quad is equipped with a three-speed, shift-on-the flytransmission that enables the operator to quickly adjust tochanging ground conditions, and standard rear steering thatgives the RT120 Quad a tighter turn radius, resulting in bet-ter job site maneuverability.The RT120 Quad offers several attachments for a range of
underground construction tasks, including a combinationtrencher/plow attachment, an individual plow, a backhoe, areel carrier, two types of saw and two types of trencherattachments.For more information, call 800/654-6481 or visit
www.ditchwitch.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Ditch Witch UnveilsRT120 Quad Tractor
The RT120 Quad frame is engineered to tilt, enablingthe RT120 Quad to dig a vertical trench on unevenground.
Two New Safety Requirements Set forConstruction of Keystone PipelineBy Joan LowyASSOCIATED PRESS
WASHINGTON (AP) Safety regu-lators have quietly placed two extraconditions on construction ofTransCanada Corp.’s Keystone XL oilpipeline after learning of potentiallydangerous construction defects involv-ing the southern leg of the Canada-to-Texas project. The defects — high rates of bad
welds, dented pipe and damagedpipeline coating — have been fixed.But the federal Pipeline and HazardousMaterials Safety Administration wantsto make sure similar problems don’toccur during construction of thepipeline’s controversial northern seg-ment, which is on hold pending a deci-sion by the Obama administration. One condition requires TransCanada
to hire a third-party contractor chosenby the pipeline safety agency to moni-tor the construction and make reports tothe safety administration on whetherthe work is sound. The second requires TransCanada to
adopt a quality management programto ensure “this pipeline is — from thebeginning — built to the highest stan-dards by both Keystone personnel andits many contractors.’’ The conditions are buried near the
end of the 26 appendices in a volumi-nous environmental impact statementon Keystone XL released by the StateDepartment on Jan. 31. Most of Appendix Z is devoted to 57
well-known “special conditions’’ thatTransCanada agreed to three years ago.But conditions 58 and 59 are listed onan additional page. “Everybody looked at that appendix
and said, ‘Oh, 57 conditions. Move on.’Well, there are a couple more there,’’energy analyst Kevin Book said. “Theyjust added them without saying any-thing.’’ The new conditions were added four
months after the pipeline safety agencysent TransCanada two warning letterslast year about defects and other con-struction problems on the KeystoneGulf Coast Pipeline, which extendsfrom Oklahoma to the Texas GulfCoast. “From the start of welding,
TransCanada experienced a high weld
rejection rate,’’ said one letter datedSept. 26. More than 72 percent ofwelds required repairs during oneweek. In another week, TransCanadastopped welding work after 205 of 425welds required repair. Inspections by the safety agency
found TransCanada wasn’t usingapproved welding procedures to con-nect pipes, the letter said. The companyhad hired welders who weren’t quali-fied to work on the project becauseTransCanada used improper proce-dures to test them, the letter said. Inorder to qualify to work on a pipeline,welders must have recent experienceusing approved welding proceduresand pass a test of their work. The weld failure rates are “horrible,’’
said Robert Bea, professor emeritus ofcivil and environmental engineering atthe University of California, Berkeley.“The level of defects is indeed causefor alarm and indicative of somethingthat is going on in the Keystone organ-ization that isn’t satisfactory.’’ In high-risk projects such as nuclear
submarines or nuclear power plants,even one-tenth of a percent rate of badwelds would be cause for deep con-cern, Bea said. He is a certified welderand was an expert consultant on theconstruction of the trans-Alaskapipeline in the 1970s. “In this case, you are talking about a
pipeline that has requirements on itsperformance that rival those of anuclear power plant,’’ he said. Another letter, dated Sept. 10, said a
government inspector witnessedTransCanada officials investigatingdents in pipeline that had been laidwithout first sufficiently clearing rockfrom trenches or from soil used asbackfill. The same letter said coatingthat protects pipeline from corrosionwas damaged by weld splatter becausea contractor hadn’t followed the com-pany’s welding procedures. Eventually,pipeline was excavated in 98 places tomake coating repairs. Dents and damaged coatings are
serious defects because they can weak-en pipes and lead to failures, Bea said. Davis Sheremata, a spokesman of
TransCanada, cautioned against draw-ing a connection between constructionproblems found on the southern legbetween Cushing, Okla., and
Nederland, Texas, and conditionsplaced on the northern leg, which willextend from Alberta, Canada, toNebraska’s southeast corner. Thesouthern leg’s problems are “a separatematter,’’ he said in an email. “TransCanada had identified and
addressed these issues prior to anyproduct being introduced into thepipeline and reported them voluntari-ly’’ to the government, Sheremata said.“The fact that the anomalies on theexterior of the pipe were discovered inthe first place is a direct result of the 57special safety conditions we agreed toimplement on this project andKeystone XL, many of which are notrequired by regulation but are standardpractice on all TransCanada pipelineconstruction projects.’’ But Book said the timing “would
seem to suggest [the pipeline safetyagency] was uncomfortable with theconstruction of Keystone south andthat was part of their reasoning’’ forimposing additional conditions on thenorthern leg. Damon Hill, a spokesman of the
pipeline safety agency, said the addi-tional conditions were the result of“observations in the field during con-struction projects from several pipelineoperators over the past few years,’’ aswell as the agency’s general knowledgeand experience. Keystone is intending to transport oil
from Canadian tar sands to oil refiner-ies on the Gulf Coast. Supporters saythe pipeline will create thousands ofjobs and aid energy independence.Environmentalists warn of possiblespills and say tar sands oil is especially“dirty’’ and will contribute to globalwarming. The project has become a major
flashpoint alongside the larger debateover carbon emissions, drilling policiesand tax breaks for energy companies. The administration said in April it
was putting off its decision on whetherto approve the pipeline indefinitely. Adecision now isn’t expected until afterthe November elections.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 87
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95, Color Ad $145
2006 Gehl 7810 Turbo, 115HP, 2260 Hrs, 3675 LbLift, 84” Bkt, 2 Speed..................................$30,900
Call Scharber & Sons 763-428-410716-17 PKNew Compact Excavators ....Starting at $41,000
Call Dan 612-306-4496 16-17 PK
2003 Ditch Witch 255SX Vibratory Plow, 12” Feed Bladew/3 Boring Rods, 550 Hrs, Exc. Condition.......................Call
Call Tim at 630-665-5600 17 JM
“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-QualitySUMMIT Rubber Tracks to fit over 3500 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call
Summit Supply LLC888-888-1248 • [email protected] 17-18 TM
2001 Metal Works Trailer, 10,000# Capacity, 18’x72.5” FlatDeck, 12,000#GVWR, Elec. Brakes .............................$2,400
Call Steve Samosky • 262/373-2151 17 JM
2006 Link Belt 75 Spin Ace, 3955 Hrs, 24” Bkt, Blade, 15’Dig Depth ..................................................................$44,700
Call Steve Samosky • 262/373-2151 17 JM
2005 Takeuchi TL140, 2970 Hrs, Cab, 81 HP, 76” Bkt, 18”Rubber Tracks ...........................................................$24,250
Call Steve Samosky • 262/373-2151 17 JM
2006 ASV RC100, 2795 Hrs, Cab, Heat, High Flow, Hyd Cplr,2 Speed .....................................................................$24,800
Call Steve Samosky • 262/373-2151 17 JM
2008 Wacker WL30, 700 Hrs, 66” Bkt, 51 HP, Cab, A/C,Articulated .................................................................$31,100
Call Steve Samosky • 262/373-2151 17 JM
2012 Wacker 28Z3, 75 Hrs, OROPS, Coupler, Aux. Hyd,Rubber, 9’ Dig Depth, 5680 Lbs................................$32,360
Call Steve Samosky • 262/373-2151 17 JM
Efficient Earthmoving Solution, 2013 K-Tec 36.cu.yd Scraper,2004 Cat 740 ADT, 8402 Hrs, 600+HP Completew/Hydraulic/Hitch System.................................................$CALL
K-Tec Earthmovers Inc.1-866-496-7561 • www.ktec.com 17-18 PK
2008 LeeBoy Paver 8515T, 1036 Hrs Documented, SN#53725 EX County Machine, Legend Screed, Sonic Feeds, LightPack, Exceptional Condition, Impeccably Maintained ...$69,500
Call 734-363-4814 or 734-660-4572 17-18 AP
2007 Ditch Witch XT1600, 221 Hrs, Tracks at90%, Excellent Condition ................................$49,500
Call Tim 630-665-5600 17 JM
2002 Vermeer HG525 Horizontal, 388 Hrs, LowHour Trade In Powerful 525HP Cat Engine, Readyfor Your Yard.....................................................$149,900
Call Alan Chenevey 800-392-2686 16-17 EB
2009 Takeuchi TL250, 2000 Hrs, Cab/Heat/Air, Brand NewTracks,80'' Tooth Bucket w/New Teeth, Hydraulic QC, Clean, Serial Number: 225000148 .......................................$48,000
Call Jim Spicer • 309-275-8545Central Illinois Ag, Farmer City, IL 17 JM
Used 2010 S630 Bobcat Skid Loader, 74.3HP Turbo-Diesel, 549 Hrs, Tires Like New, 2-Speed, High-Flow, Cabw/Heat/AC, Switchable Controls, Stereo, Power Bob-Tach,Deluxe Instrumentation ...............................................$33,800
Top Notch Equipment 763-398-0079 17-18 PK
MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS &TRACK LOADERS, The most trusted brand in Americabrings you quality tracks for your specific make and model.
Call McLaren 888-492-4230 16-17 FS
MCLAREN FOR SKID STEER TRACKS, Full flotation; traction;tire protection; machine stability; self-cleaning; less grounddamage; fully rebuildable; interchangeable shoe types.
Call McLaren 888-492-4230 16-17 FS
MCLAREN SOLID CUSHION TIRES, for skid steers, back-hoes, telehandlers, wheel loaders - Nu-Air Semi-PneumaticTire Technology: no flats ever; soft, air-cushioned ride; last3 to 5 times longer than regular pneumatic tires; rimsincluded; same day shipping; various tire sizes available.
Call McLaren 888-492-4230 16-17 FS
2008 70 Ton Liddell Drop Side Deck Lowboy Tri-AxleTrailer, Tandem Two-Axle Jeep, Two-axle Nitro Stinger withMotor ......................................................................$210,000
Sun Piledriving Equipment 302-539-7187 17 BB
Page 88 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95
2010 Gehl V270 Vertical Lift Skid Loader, Like New,One Owner, 785 Hrs, OROPS, ISO Joystick Controls,74” 22.8 Cu. Ft. HD Bkt, Custom Radiator Guard,Super Nice Machine! .......................................$29,900
Call George 219-696-8911 17 JM
1991 John Deere 300D, S/N 775834, Open ROPS....................................................................$19,000Call 502/456-4050 Ask for Melissa or Albert 17-18 EB
2004 Cedarapids 452, Front Wheel Assist TopconElectric 20’ Screed, 5546 Hrs..........................$87,500
Call 605-336-0411 17-18 PK
1981 Grove Rt 755, 55 Ton S/N # 49225,Cummins Rebuilt, 110’ Main Boom, 32’ Jib,
Auxilliary Hoist, 5 Sheave Block, Cleveland OhioCall Andy 216-316-1511 17-18 EB
1993 Grove Rt 422,22 Ton S/N # 78334,Cummins 4 Cyl12,100 Hours, 3Speed Transmission,27’-70’ Main Boom,25’-43’ Jib, AuxilliaryHoist,17.5 X 25 Tires,Ball, New Rotec,Boom Scope CylinderRebuilt, Fresh GrovePaint, Cleveland Ohio
Call Andy 216-316-1511
17-18 EB
2012 Case 850L, s/n NCD80092, 700 Hrs, Cabw/Heat & AC, 124” Blade, 24” Grousers ..$120,000
Call Mark 630-739-7770 17 JM
1998 Case 1840, s/n JAF0221937, 2800 Hrs,ROPS, Aux Hyds, 60” Bkt, 10x16.5 Tires.....$9,500
Call Ray 630-878-8810 17 JM
1992 Case 252, s/n JKC7513522, 700 Hrs, 39”Tandem Drum Smooth Roller .......................$7,300
Call Steve 630-878-8765 17 JM
SEE YOUR BARGAIN AD INCOLOR
ONLY $50 EXTRA FOR TWO INSERTIONS
2006 Ditch Witch FX60 Vacuum Excavator, 800 galspoils capacity, 200 gal water tank, 4 cylinder Cumminsengine, 3251 hours ..............................................$32,500
Call Tania 614-443-9751 x237 17-18 EB
2007 Kobelco SK290LC-LR, s/n YQ13U5369,4390 Hrs, 62’ Long Reach........................$119,000
Call David 219-696-5680 17 JM
Here's how the BARGAIN ADS Work:
• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to: [email protected], or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $95 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.
For more information, call Construction Equipment Guide today at
800/523-2200
2012 Bobcat S205, Encl. Cab Heat A/C, 2 Spd, Pwr Bob-Tach, Keyless St., 286 hrs, EN 1074335, GC ............$34,700
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Topeka 17 JM
2013 Bobcat S650, Encl. Cab Heat A/C, Hand Control, 521hrs, EN 1068196, GC ................................................$49,125
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Topeka 17 JM
2012 Bobcat E50, 1059079, Encl Cab, Heat A/C, Pwr BobTach,Keyless, BP, 208 Hrs......................................................$58,100
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Garden City, KS 17 JM
2008 JD CompactExcavator 17D,w/Breaker, Open Cab,411 Hrs, EN 1086985......................$22,195
800-950-3321www.whitestarmachinery.comWhite StarMachinery,Wichita, KS
17 JM
2012 Bobcat S185, Encl Cab Heat A/C, 2 Spd, HF, 160 Hrs,1063415 .........................................................................$33,000
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Garden City 17 JM
2011 Cat 980K, 4200 Hrs, Scale, EROPS w/A/Cand Heat ........................................................$POR
Courts Machinery • 507/678-2752 17-18 PK
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 89
To view our Business Calendar online,
go to www.constructionequipmentguide.com.
Ohio Nursery & Landscape Association – ONLA Summer CEUProgramsTuesday, August 26, 2014Irrigat ion Electrical Service Workshop (Irrigation: Diagnostics,Repair & Servicing)Location: Wolf Creek Company, Columbus, OHPrice: $40 ONLA Member; $60 Non-Member, Lunch Included;Credits AvailableTuesday, October 7, 2014Irrigat ion Electrical Service Workshop (10:00 AM to 2:00 PM)(Irrigation: Diagnostics, Repair & Servicing)Location: Wolf Creek Company, Sharonville, OHPrice: $40 ONLA Member; $60 Non-Member, Lunch Included;Credits AvailableWednesday, August 27, 2014Efficient & Product ive Tree Climbing Program (9:00 AM to 3:00PM)Location: Buckeye Equipment Sales NW, Cleveland, OHPrice: $200 ONLA Member; $250 Non-Member, Lunch Included;Credits Available
Crane Inspection & Certification Bureau (CICB) to provide Craneand Rigging Inspector Training in SALT LAKE CITY, UT on AUGUST 18-22, 2014 or Rigger/Signal Person Train the Trainer Program on AUGUST 25-27.CICB will be in Salt Lake City, UT providing Mobile Crane andRigging Inspector Training (August 18-20) or Overhead Crane/Hoistand Rigging Inspector Training (August 20-22). Program includesall training, manuals, a professional inspector’s kit, written exami-nations, hands-on evaluations, and certificates and wallet cards.On August 25-27, a Train the Trainer Program for BasicRigger/Signal Person will also be held. To register, please call con-tact Camille at 800/327-1386. For more information, please visitwww.cicb.com.Crane Inspection & Certification Bureau (CICB) to provide Craneand Rigging Inspector Training in HOUSTON, TX on AUGUST 18-22, 2014 or Basic Rigger/Signal Person Train the Trainer Program on AUGUST25-27.CICB’s Houston Training Center will be providing Mobile Crane andRigging Inspector Training (August 18-20) or Overhead Crane/Hoistand Rigging Inspector Training (August 20-22). Program includesall training, manuals, a professional inspector’s kit, written exami-nations, hands-on evaluations, and certificates and wallet cards.On August 25-27, a Train the Trainer Program for BasicRigger/Signal Person will also be held. To register, please call con-tact Camille at 800/327-1386. For more information, please visitwww.cicb.com.Crane Inspection & Certification Bureau (CICB) to provide Craneand Rigging Inspector Training in ORLANDO, FL on AUGUST 25-29, 2014. CICB’s Orlando Training Center will be providing Mobile Crane andRigging Inspector Training (August 25-27) or Overhead Crane/Hoistand Rigging Inspector Training (August 27-29). Program includesall training, manuals, a professional inspector’s kit, written exami-nations, hands-on evaluations, and certificates and wallet cards.To register, please call contact Camille at 800/327-1386. For moreinformation, please visit www.cicb.com.
SAVE THE DATE!American Public Works Association2014 International Public Works Congress and ExpositionAUGUST 17 – 20, 2014Metro Toronto Convention CentreToronto, Ontario APWA’s International Public Works Congress & Exposition attractsmore than 5,000 attendees each year and excitement continues togrow as we gear up for Toronto in 2014. This is one event you can’tafford to miss! Prime locations are filling up fast so don’t wait, callme directly at 703/706-8230 or email at [email protected] toreserve your booth today. For more general information on the aboveshow, please contact APWA Show Management at 800/687-7469or 703/706-8230; email: [email protected]. Website:www.apwa.net.
COAL-GENAugust 20 to 22, 2014, Music City Center, Hall B, Nashville,Tennessee With over a decade of service to the coal sector, COAL-GEN is theindustry’s most dynamic event covering the latest topics affecting thedesign, development, upgrading, operation and maintenance ofcoal-fueled power plants. With an anticipated attendance of nearly2,000 industry professionals, COAL-GEN is the industry’s largestevent focused on the solutions of today and the technologies oftomorrow. The Benefits of Attending COAL-GEN 2014 include: Gaina better understanding of current and future issues affecting the coalindustry. Be a part of the discussions affecting the design, devel-opment, upgrading, operation and maintenance of coal-fired powerplants. Learn about technical developments and how they impactyour work; and network with thousands of industry professionals.Earn Professional Development Hours in our Pre-ConferenceWorkshops. For COAL-GEN event information, contact JenniferLindsey at 918/832-9313 or email: [email protected]. Associated General Contractors of Minnesota (AGC of Minnesota)
SPORTING CLAYS FUNDRAISERWhen: AUGUST 25, 2014 – Monday, 12:30 PM until 6:30 PMWhere: Minnesota Horse & Hunt Club, 3300 220th Street, E., PriorLake, MNContact: For more details on this event, contact Denise Woods atAGCPhone: 651/796-2186 or [email protected]
AGC of Minnesota, Red Wing TH63 Bridge ProjectOn September 2 and 5, 2014, MnDOT and WisDOT will hold con-structability review meetings for the Red Wing bridge project. Theproject involves replacement of Bridge 9040 over the MississippiRiver, replacement of Bridge 9103 over TH 61, and approach road-way realignment on the Minnesota and Wisconsin approaches. Formore information on attending these meetings, please call DeniseWoods, CMP at 651/796-2186 (direct) or 800/552-7670 (tollfree) or visit www.agcmn.org.
The Future of Transportation Funding – Plan to Attend the FallMember MeetingAGC of Minnesota members and guests are invited to attend the fallmember meeting in Willmar, Minnesota on September 9, 2014.Transportation funding is at a crossroads in both MN andWashington, DC. Traditional user fees like the gas tax are beingeroded by more fuel efficient vehicles and the impact of constructioninflation while the need for maintaining our existing infrastructureand also making modest system improvements is increasing. Don’tmiss this unique opportunity to hear directly from the players whoare closely involved in this important industry issue and to askquestions. Please contact Denise Woods, CMP at 651/796-2186(direct) or 800/552-7670 (toll free) or visit www.agcmn.org formore information.
General Contractors – Join AGC of Minnesota at the MSES FallOutingSeptember 10-12, 2014For the first time, AGC will host a contractors’ cabin as part of Tasteof MSES, just one of the activities available at the MSES Fall Outingat The Pines at Grandview Lodge, 23521 Nokomis Avenue, Nisswa,MN. The MSES Fall Outing Wednesday Tournament is on September10th; Complimentary Lunch at 11:30 AM; Shotgun at 1:30 PM;Prizes to be awarded on Thursday during the Social Hour. Join usfor an opportunity to visit with surveyor and engineer representativesalong with attendees from MnDOT. For more information on this event, please contact Derek Schmidt [email protected] or call (612) 518-1643.
NTEA TRUCK PRODUCT CONFERENCE TUESDAY, SEPTEMBER 16, 2014 THROUGH THURSDAY,SEPTEMBER 18, 2014REGISTER TODAY FOR NTEA’S TRUCK PRODUCT CONFERENCE ATTHE ADOBA HOTEL, DEARBORN/ DETROIT, MICHIGAN. THE TRUCKPRODUCT CONFERENCE IS YOUR CHANCE TO PREVIEW NEXTYEAR’S VOCATIONAL TRUCK AND PRODUCT OFFERINGS FROMELEVEN (11) LEADING CHASSIS MANUFACTURERS! FOR MORE INFORMATION ON THIS EVENT, YOU MAY CALL THE NTEAOFFICE AT TOLL FREE: 1/800-441-6832
The Ohio State University Farm Science Review EventSeptember 16 thru September 18, 2014The 52nd annual Ohio State University Farm Science Review will beheld Sept. 16-18 at the Molly Caren Agricultural Center, and prepa-rations are well underway for the annual farming showcase, whichattracts more than 130,000 farmers, growers, producers and agri-cultural enthusiasts from across the U.S. and Canada annually.Participants are able to peruse 4,000 product lines from more than600 commercial exhibitors and engage in educational opportunitieswith Ohio State and Purdue University specialists, Ohio StateExtension, and the Ohio Agricultural Research and DevelopmentCenter. More than 600 commercial exhibitors set up shop at theReview each year, displaying the latest and greatest in farming tech-nology, products, machinery and equipment. For exhibitors, it’s achance to reconnect with established customers and connect withnew ones. “If you come to the 2014 Farm Science Review, you will‘Experience the Difference.’” The Media coordinators for the FarmScience Review are:Janice Welsheimer, Wilt Public Relations937/688-3878; [email protected]; www.wiltpr.comTracy Turner, CFAES Communications and Technology614/688-1067; [email protected]; http://cfaes.osu.edu
AGC OF MINNESOTACONSTRUCTION FINANCIAL MANAGEMENT CONFERENCENOVEMBER 5 THROUGH 7, 2014 IN LAS VEGAS, NEVADATHE AGC/CFMA CONSTRUCTION FINANCIAL MANAGEMENTCONFERENCE WILL BE HELD ON NOVEMBER 5 – 7, 2014 IN LASVEGAS, NEVADA. GET THE LATEST INFORMATION ON:CONSTRUCTION MARKET TRENDS; FINANCIAL ACCOUNTINGSTANDARDS BOARD; SURETY, FINANCIAL, AND CREDIT MARKETS,CHANGE ORDER AND CLAIMS MANAGEMENT; FEDERAL ACQUISI-TION REGULATIONS; CONSTRUCTION TAXES; STRATEGIES FOR ECO-NOMIC CONDITIONS; BUSINESS REAL ESTATE MANAGEMENT;ETHICS AND FRAUD. REGISTER BEFORE SEPTEMBER 5TH:
$780/AFTER SEPTEMBER 5TH: $860. CONFERENCE DETAILS AREAVAILABLE AT HTTP://MEETINGS.AGC.ORG/AGC _CFMA.
BusinessCalendar
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on
our online searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200
CLASSIFIEDS
ASPHALT EQUIPMENT
Asphalt Cutters
Attachments InternationalASPHALT CUTTERSSEVERE SERVICE
HIGH SPEEDASPHALT CUTTER
Skid Steers, TLB, Loaders,
Excavators
14 Models Available
‘’24-48 hour shipping’’
SPECIAL PRICING!
Call 218-863-6444www.attachmentsintl.comwww.attachmentsusa.com
CRANES
Boom Cranes
2013 National NBT45, 142’Boom Mounted on 2013Freightliner FL- 114SD, goodcondition, 1150 hrs $419,900.
2013 National NBT45161,38.5 - 161 ft. 5 section full-power boom, good condition ..................................$525,000.
Aspen Equipment952-656-7107
EXCAVATORS
Hydraulic Excavators
2008 Doosan DX340Excavator & Shear, GenesisGXP500R Shear, replacementmeter, good condition ..............................................$125,000.
440-439-4000
LOADERS
Backhoe Loaders
2008 Yanmar CBL40, PTO, 3Pt. Hitch, backhoe, great condi-tion, 216 hours ..............CALL.
641-628-2000
2008 Yanmar LBL40, PTO, 3pt. hitch, backhoe, loader buck-et attached w/ skid plates,great condition ..............CALL.
Vermeer Sales & Service641-628-2000
Skid Steer Loaders
2013 Kubota SVL75-2,Cab/Heat/Air, 72’’ Tooth bucket,Tracks @ 75%, Hyd QuickCoupler, 317 hours ....$45,000.
309-275-8545
2012 Takeuchi TL12, Cab w/Heat & Air, Ride Control,Control pattern change valve,Smooth bucket, 660 hrs ............................................$61,000.
309-275-8545
Wheel Loaders
2002 John Deere 544H,#125263, Cab w/ heat,Hydraulic coupler, 20.5 x 25tires, 6612 hours, regular main-tenance......................$55,500.
316-945-1015
MATERIAL HANDLERS
Material Handlers
2007 Sennebogen 835 M-Cscrap material handler, goodcondition, 15,526 hrs$125,000.
440-439-4000
MOTOR GRADERS
Graders
2010 John Deere 770G,#120602, 14’ blade, A/C, 14.00x 24 radial tires, regular main-tenance, 2881 hours$195,000.
316-945-1015
TELEHANDLERS
Telescopic Handlers
JCB 515-40, #1769054, Cabw/ AC, 4WD/4WS, Skid-Steercoupler, Lifts 3,300 lbs. @ 13.2Ft., Pictures and Financingavailable, mint condition, lowhours ............................OPEN.
908-625-0697
Keep Up With All theIndustry News
Subscribe to
ConstructionEquipment
Guide Today!Toll Free
800/523-2200
Page 90 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ATLAS COPCO F9 ROCK DRILL | IAMLOOKING FOR 1000 HRS OR CLOSE TOATLAS COPCO F9 NO OLDER THAN2012 IN GOOD ORDERCONTACT: F STOPFORDPHONE: 0400 5888 58EMAIL: [email protected]––––––––––––––––––––––––––––––––CRAWLER CRANE | IM LOOKINGCRAWLER CRANE 70TON-120TONSFROM YEAR 1990CONTACT: CANPHONE: 0031624971056FAX: 0031107952268EMAIL: [email protected]––––––––––––––––––––––––––––––––JLG E400AJPN | CHERRY PICKER JLGMODEL # E400AJPN SER # 030081318BOOM 40 – 46 FT ELECTRIC ARTICU-LATING NARROWCONTACT: CHERRY VILLANPHONE: 709-6515778FAX: 709-700-5001EMAIL:[email protected]––––––––––––––––––––––––––––––––CONSTRUCTION | NEED A KOMATSUPC1250 / PC1100 STICK ANY LENGTHTO STRETCH FOR A CUSTOMER OFOURS. PLEASE SEND ME WHAT YOUHAVE, THANKSCONTACT: TYLER PALUMBOPHONE: 330-365-0654EMAIL: [email protected]––––––––––––––––––––––––––––––––CASE LOADER BACKHOES | CASE 580LOADER BACKHOES MODELS SK L SLM SM N SNSCONTACT: FRANK @ TRICO EQUIP-MENTPHONE: 1-800 TRICO 50FAX: FAX 732-780-3618EMAIL:[email protected]––––––––––––––––––––––––––––––––DOZER AND EXCAVATOR | LOOKINGFOR CAT 325CL, CAT 325L, CAT D8NOR/AND D9N. USA LOCATION ONLY.THANKS!CONTACT: SANTIAGO SCARZELLAPHONE: 3055064263EMAIL: [email protected]––––––––––––––––––––––––––––––––KACR7083T00243PUMP | KAC-R708-3T-00243PUMP HYD.PIS DO U HAVE ANYUSEDCONTACT: STAN BETTSPHONE: 7163264841EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU WA600 | WE ARE LOOKINGFOR KOMATSU WA600 AND HD405,325.465.CONTACT: MASSIMO RANIERIPHONE: +491775778980EMAIL:[email protected]––––––––––––––––––––––––––––––––DOZER TRACKHOE | WOULD LIKE TOFIND A GOOD SIZE DOZER WITH ROOTRAKES AND A LARGE TRACK HOE INGOOD SHAPE FOR A FAIR PRICECONTACT: TOMMYPHONE: 251-604-0149EMAIL: [email protected]––––––––––––––––––––––––––––––––
WE BUY EQUIPMENT MANUALS | WEARE LOOKING TO PURCHASE NEW ORUSED SERVICE, SHOP, PARTS, OPERA-TOR’S OR OTHER MANUALS FOREQUIPMENT OF ALL SORTS, BUT NOTINCLUDED TRUCKS AND VEHICLES.WE PREFER IN BULK, PERHAPS YOUHAVE COMPUTERIZED YOUR SERVICEOR PARTS OPERATION AND YOU HAVEBOOKS OR MANUALS YOU NOLONGER NEED, OR INVENTORIES YOUHAVE NOT SOLD. PERHAPS AS A DIS-CONTINUED PRODUCT LINE. WE WILLPURCHASE IN ANY USEABLE CONDI-TION IN ANY AMOUNT YOU HAVE.PLEASE FEEL FREE TO CALL US AT270-849-2270 OR EMAIL US.CONTACT: GRACE FRANCESPHONE: 2708492270EMAIL: [email protected]––––––––––––––––––––––––––––––––YANMAR ENGINE | I HAVE A VOLVOEC55B EXCAVATOR AND I NEED ANENGINE FOR IT. I NEED A YANMAR4TNE94-SM ENGINE AND I WOULD LIKETO KNOW IF YOU CAN HELP MELOCATE ONE. PLEASE CONTACT ME ATYOUR EARLIEST CONVENIENCE.THANK YOUCONTACT: MARIAPHONE: 9735739561EMAIL: [email protected]––––––––––––––––––––––––––––––––ATTENTION CONTRACTORS | WE ARELOOKING FOR CAT WHEEL LOADERS,910, 920, 930, 950, 950B, 950E, 966DHERE IN USA, OR AUSTRALIA UNAD-VERTISED & WHOLESALE PRICE,QUOTE ME ON MY EMAIL.THANK YOUCONTACT: ROYAL TRADERSEMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU PC78 MR6 LONG STICK |CONTACT: JOHNSLEDPHONE: 5704438958EMAIL: [email protected]––––––––––––––––––––––––––––––––EXCAVATORS , BACKHOE LOADERS |EXCAVATORS 20 A 22 TON (YEAR 2012,2103, 2014)LESS THAN 2000 HOURSBACKHOE LOADERS (YEAR 2012, 2013,2014)LESS THAN 2000 HOURS ONLY INEUROPE WWW.MAKCHINES.COMCONTACT: EMANUEL FERNANDESPHONE: +351 916494618FAX: WWW.MAKCHINES.COMEMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 TRACK JAWCRUSHER | LATE MODEL, LOW HOUR,USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––
INSLEY K12 | MANUALS FOR INSLEYK12 DRAGLINECONTACT: BILL STEPHENSONPHONE: 765 618 6548FAX: N/AEMAIL:[email protected]––––––––––––––––––––––––––––––––CAT 450 AND 450-C MILLING MACHINESCONTACT: TOM ROSSERPHONE: 610-888-0762EMAIL: [email protected]––––––––––––––––––––––––––––––––EXCAVATORS | HITACHI ZX 210 - 2012TO 2014 LESS 1000 HOURS KOMATSUPC 210 - 2012 TO 2014 LESS 1000HOURS CATERPILLAR 320 - 2012 TO2014 LESS 1000 HOURS BACKHOELOADER NEWCONTACT: EMANUEL FERNANDESPHONE: +351 916494618EMAIL:[email protected]––––––––––––––––––––––––––––––––TEREX TS14G SCRAPER | LOOKINGFOR ONE TS14G, LATE MODEL WITH5,000 HOURS OR LESS, CAB, AC, PUSHPULLCONTACT: ADT RESOURCES INC.PHONE: 510-338-3023EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING TO BUY USED CATERPILLARWHEEL LOADERS 920, 926, 930, 936,938F/G, 950B/C/E/F, 966C/D/E/F/H,980C/F AND 988B. IF YOU HAVE ANY,PLEASE OFFER ME WITH PICTURES,SERIAL NUMBER, CONDITION, LOCA-TION AND FINAL OFFER PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING FOR CAT WHEEL LOADERS,910, 920, 930, 950, 950B, 950E, 966DHERE IN USA, OR AUSTRALIA UNAD-VERTISED & WHOLESALE PRICECONTACT: ROYAL TRADERSEMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR A MID SIZE EXCAVATORFOR CUSTOMER. SMALL - MID SIZE15000-18000 POUNDS. BLADE, BUCKET.PREFER SOMETHING IN THE NJ/NYAREA.CONTACT: JIM FARMER AAA HEAVYEQUIPMENT BROKERSPHONE: 732-998-2254EMAIL:[email protected]––––––––––––––––––––––––––––––––GRADER 12 GCONTACT: NORBERTPHONE: 240-593-5021EMAIL: [email protected]––––––––––––––––––––––––––––––––WANT PURCHASE SEVERAL 1994-2005SCHWING CONCRETE BOOM FROM36M TO 54M PLEASE SEND US MODEL ,DETAIL, PICTURE & PRICESCONTACT: LISEPHONE: 819-635-3577EMAIL: [email protected]––––––––––––––––––––––––––––––––
HYDRAULIC MIXER DRIVE | WE WANTTO BUY USED CEMENT MIXER TRUCKDRUM HYDRAULIC GEAR BOXES (MIXER DRIVE GEAR BOXES) , P & PKOLD OR NEW MODEL MUST BE INWORKING CONDITION PLEASE SENDME , DETAIL , PHOTO , QUANTITY &YOUR BEST SERIOUS EXPORT PRICESCONTACT: M.ASKARIPHONE: 819-246-9577EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU D57S1 TRACK LOWERCONTACT: DOUGPHONE: 256-590-2901EMAIL: [email protected]––––––––––––––––––––––––––––––––LONG REACH BOOM COMPLETE, FORA 330 CAT EXCAVATORCONTACT: GARYFAX: 985-702-1173EMAIL: [email protected]––––––––––––––––––––––––––––––––SCHWING CONCRETE BOOM PUMPS |28 METER TO 39 METERS LOOKINGFOR SEVERAL MACHINES YR 94 THRU2005CONTACT: WILLIAM CROSSPHONE: 407-595-8221FAX: 407-843-0247EMAIL:[email protected]––––––––––––––––––––––––––––––––WABCO - LETOURNEAU C-PULL ENDDUMPCONTACT: RANDY MPHONE: 785-948-2231EMAIL: [email protected]––––––––––––––––––––––––––––––––SUPER SUCKER TRUCK/ GUZZLERTYPE | HYDRO EXCAVATOR OR GUZ-ZLER CLASSICCONTACT: DAN YELLEMAIL: [email protected]––––––––––––––––––––––––––––––––TEREX BACKHOE 760B 4 X 4 EX-HOELOW HOURS 26000$ MAXCONTACT: RICH SCHNOORPHONE: 561-222-1106EMAIL: [email protected]––––––––––––––––––––––––––––––––
BULLDOZER D9H D9L D9N D9R D10NWITH RIPPER USER USA | WANT TOBUY 12 MONTHS BULLDOZERS NOTADVERTISE ONLY USA «CONTRAC-TORS ONLYS BULLDOZER D9H WITHRIPPER D9L D9N D9R D10N ALL THETIMES WITH RIPPER NOT ADVERTISEAND NO HACKER USERCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 ORMOB 1 514 386 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––BACKHOE NEW HOLLAND LB90 INGOOD CONDITIONCONTACT: LOUPHONE: 201-410-1090FAX: 201-727-1010EMAIL: [email protected]––––––––––––––––––––––––––––––––1978 VINTAGE HOUGH AXLES | HOUGHINTERNATIONAL DRESSER 1978 VIN-TAGE PARTSCONTACT: LLOYD BRUSHWEINPHONE: 1-207-324-2437FAX: 1-207-490-6795EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT HD 24" BUCKET WITH A QUICKCOUPLER.CONTACT: KATHYEMAIL: [email protected]––––––––––––––––––––––––––––––––CLAMSHELL BUCKETS/ALL SIZES/ ANDTYPES/ROCK /GRAPPLES/ALLSIZES/TYPES!CONTACT: JACK JOHNSONPHONE: 813-390-8626EMAIL: [email protected]––––––––––––––––––––––––––––––––MITSUBISHI | DOZER, LOADER, GRAD-ER, DUMPER, ENGINES, RUNNING ORNOT.CONTACT: STANPHONE: 253-536-0600EMAIL: [email protected]––––––––––––––––––––––––––––––––WELDING MACHINE VANTAGE 300 ORLINCOLN CLASSIC 300DCONTACT: CARLOS DIAZPHONE: 8326292447EMAIL: [email protected]––––––––––––––––––––––––––––––––HITACHI EX400 TRACK PAD BOLTS &NUTS | HITACHI EX-400 LC EXCAVATORI NEED A DELIVERED $ PRICE TO ZIPCODE: 15473 FOR 424 EACH TRACKPAD BOLTS (PART # SI-651) 424 EACHTRACK PAD NUTS (PART # SI-652)CONTACT: CLIFFFAX: 724-736-4998EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR A ROADTEC RP170 INGOOD CONDITION TO BE EXPORTEDTO AUSTRALIA.CONTACT: BEN HEMMERLINGPHONE: 61412718267EMAIL:[email protected]––––––––––––––––––––––––––––––––
SCHWING CONCRETEPUMP BOOMTRUCKS | SCHWING BOOM TRUCKS32M TO 39M 93 TO 2005CONTACT: WILLIAM CROSSPHONE: 407-595-8221FAX: 407-843-0247EMAIL:[email protected]––––––––––––––––––––––––––––––––MACK TRIAXLE DUMP TRUCK (19952005) | SMALL PAVING COMPANYSEEKS TO BUY TRI-AXLE DUMP TRUCKIN REASONABLE CONDITION WITHSTEEL BODY AND PINTLE HITCH FORDAILY USECONTACT: DAVE BAKERPHONE: 443-799-6625FAX: 410-484-5785EMAIL:[email protected]––––––––––––––––––––––––––––––––CARRIAGE & FORKS FOR CAT TH560BCONTACT: LOUIE VERMETTEPHONE: 508-946-1409FAX: 508-947-5371EMAIL:[email protected]––––––––––––––––––––––––––––––––PICKUP TRUCKEMAIL: [email protected]––––––––––––––––––––––––––––––––CONCRETE BOOM PUMPS , USED 1992-2002 SCHWING 47M , 52M , 54M THETRUCK OF PUMP IS NOT IMPORTANTFOR US BUT THE PUMP MUST BE INGOOD WORKING CONDITION & OUT-RIGGER OF PUMP MUST BE X-STYLECONTACT: M.ASKARIPHONE: 819-246-9577EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT CP-433 PADFOOT COMPACTIONROLLER.CONTACT: BILL BUTLERPHONE: 770-231-4662EMAIL: [email protected]––––––––––––––––––––––––––––––––USED CATERPILLAR WHEEL LOADERS920, 926, 930, 936, 938F/G, 950B/C/E/F,966C/D/E/F/H, 980C/F AND 988B. IF YOUHAVE ANY, PLEASE OFFER ME WITHPICTURES, SERIAL NUMBER, CONDI-TION, LOCATION AND FINAL OFFERPRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––EQUIPMENT TRAILER | 18 - 25 12000-14000 LB. EQUIPMENT TRAILERCONTACT: RUSSEMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR A PACKAGE DEAL ON A75HP-90HP SKID STEER, TRAILER,TREE CUTTING ATTACHMENTS, GRAP-PLE BUCKET, FORKS, BRUSH CUTTER,ECTCONTACT: MICHAELPHONE: 405-519-6606EMAIL: [email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit:
www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 91
ALEX LYON & SON
AUCTIONEERS
www.lyonauction.com315-633-2944�
• Elmira, NYSat., August 16, 2014For: Aggregate & ConstructionEquipment
• Portland, MESun., August 17, 2014For: Complete LiquidationConstruction Equipment
• Houston (Deer Park), TXMon., August 25, 2014For: Hertz Equipment Rentals
• Houston, TXTues., August 26, 2014For: Very Late model Cat, Volvo,Komatsu Rental Fleet ConstructionEquipment
• New Orleans, LASat., September 6, 2014For: Liquidation Large RentalCompany
• Lima, PeruFri., September 12, 2014For: Late Model & NewConstruction Rental Fleet Equipment& more
• Odessa, TXWed., September 17, 2014For: Late model Cat, John DeereConstruction Equipment
• Corpus Christi, TXThurs., September 18, 2014For: Construction Equipment
• Las Vegas, NVSat., September 20, 2014For: Cat & John Deere ConstructionEquipment
• Atlantic City, NJSat., September 27, 2014For: Late Model Rental Returns
• Atlanta, GATues., September 30, 2014For: Cat, John Deere & KomatsuConstruction Equipment
• Mobile, ALWed., October 1, 2014For: Major Job Completion
• Boston, MASat., October 11, 2014For: Late model Snow Removal &Construction Equipment
• Racine, WISat., October 18, 2014For: Late Model Construction &more
• Bangor, MESat., October 25, 2014For: Late Model Construction &Rental Fleet Equipment
RITCHIE BROS.
AUCTIONEERS
www.rbauction.com402-421-2631
• Albuquerque, NMAugust 20, 2014
• Tuscaloosa, ALAugust 20, 2014
• Reno, NVAugust 22, 2014
• Myrtle Beach, SCAugust 26, 2014
• Houston, TXAugust 27-28, 2014
• North East, MDAugust 28, 2014
• Las Vegas, NVSeptember 5, 2014
• Tipton, CASeptember 9, 2014
• Phoenix, AZSeptember 12, 2014
• Salt Lake City, UTSeptember 16, 2014
• Atlanta, GASeptember 18, 2014
• Minneapolis, MNSeptember 19, 2014
• Gillette, WYSeptember 23, 2014
• Nashville, TNSeptember 23, 2014
• Kansas City, MOSeptember 26, 2014
• Raleigh-Durham, NCSeptember 30, 2014
• St. Louis, MOSeptember 30, 2014
BAR NONE AUCTION
www.barnoneauction.com866-372-1700�
• Riverside, CASat., August 16, 2014For: Heavy Equipment & Used CarAuction
• Phoenix, AZThurs., August 21, 2014For: Construction Equipment &Utility Truck Auction
• Portland, ORThurs., August 28, 2014For: Heavy Equipment & Used CarAuction
• Sacramento, CASat., September 13, 2014For: Heavy Equipment & Used CarAuction
• Riverside, CASat., September 20, 2014For: Heavy Equipment & Used CarAuction
BIG IRON
www.bigiron.com800-937-3558�
• ONLINE ONLYAugust 20, 2014
• ONLINE ONLYAugust 27, 2014
• ONLINE ONLYSeptember 3, 2014
• ONLINE ONLYSeptember 10, 2014
• ONLINE ONLYSeptember 17, 2014
• ONLINE ONLYSeptember 24, 2014
• ONLINE ONLYOctober 1, 2014
• ONLINE ONLYOctober 8, 2014
• ONLINE ONLYOctober 15, 2014
• ONLINE ONLYOctober 22, 2014
CAT AUCTION SERVICES
www.catauctions.com866-750-9432�
•ONLINE ONLYWed., August 20, 2014For: eQuipment Yard
•ONLINE ONLYWed., September 17, 2014For: eQuipment Yard
DAVIS AUCTIONS
www.davisauctionsinc.com�203-758-4087
• Prospect, CTSat., September 27, 2014For: Construction Equipment
• Prospect, CTSat., December 13, 2014For: Construction Equipment
DON SMOCK
AUCTION CO., INC.
www.dsa-auctions.com765-778-9277
• Pendleton, INFri., September 19, 2014For: 22nd Annual Fall Auction
• Lucasville, OHSat., October 18, 2014For: 10th Annual Southern OhioConsignment Auction
EQUIFY AUCTIONS, LLC
www.equifyauctions.com�903-873-6777
• Wills Point, TXThurs., August 21, 2014For: Heavy Construction Equipment
HENDERSON AUCTIONS
www.hendersonauctions.com225-686-2252
• Carencro, LASeptember 24 - 25, 2014For: 2 Day Contractor’s Auction
HESS AUCTIONEERS
www.hessauctioneers.net�866-511-2493
• Marietta, PAFri., August 22, 2014For: Truck, Trailer & EquipmentAuction
HILCO INDUSTRIAL, LLC
www.hilcoind.com�877-37-HILCO
• Missouri City, TXJuly 23 – August 22, 2014For: Private Treaty Sales for GlobalGeophysical Services
HUNYADY AUCTION COMPANY
www.hunyady.com�800-233-6898
• Pittsburgh, PAWed., August 27, 2014For: Absolute Auction CompleteLiquidation
• Jeannette, PAThurs., September 4, 2014For: Absolute Auction CompleteLiquidation
I.R.A.Y. AUCTION
www.iraymn.com�320-968-7230
• Foley, MNFri., September 12, 2014For: Heavy Construction Equipment,Truck & Trailer
• Foley, MNFri., December 5, 2014For: Heavy Construction Equipment,Truck & Trailer
IRON PLANET AUCTIONS
www.ironplanet.com�888-433-5426
ONLINE AUCTIONSGo to www.ironplanet.com to viewthe complete auction schedules,inspection reports and to place yourbid!
• ONLINE ONLYAugust 21, 2014
• ONLINE ONLYAugust 28, 2014
• ONLINE ONLYSeptember 4, 2014
• ONLINE ONLYSeptember 11, 2014
• ONLINE ONLYSeptember 18, 2014
• ONLINE ONLYSeptember 25-26, 2014
• ONLINE ONLYOctober 2, 2014
• ONLINE ONLYOctober 9, 2014
• ONLINE ONLYOctober 16, 2014
• ONLINE ONLYOctober 23, 2014
• ONLINE ONLYOctober 30, 2014
J.J. KANE AUCTIONEERS
www.jjkane.com�855-GO2-KANE
• Philadelphia, PASat., August 16, 2014For: Heavy Equipment
• Salt Lake City, UTThurs., August 21, 2014For: Heavy Equipment
• Rome, NYSat., August 23, 2014For: Heavy Equipment
• Atlanta, GAThurs., September 11, 2014For: Heavy Equipment
• St. Louis, MOThurs., September 18, 2014For: Heavy Equipment
• Gary, INSat., September 20, 2014For: Heavy Equipment
• Jackson, MSThurs., September 25, 2014For: Heavy Equipment
• Cincinnati, OHThurs., October 9, 2014
• Dallas, TXThurs., October 16, 2014
• South Beloit, ILSat., October 23, 2014
• Worcester, MAThurs., October 25, 2014
• Kansas City, MOThurs., November 6, 2014
• Philadelphia, PAThurs., November 8, 2014
• Charlotte, NCSat., November 13, 2014
• Portland, ORThurs., November 20, 2014
• Rome, NYSat., November 22, 2014
• Lansing, MIThurs., December 6, 2014
• Atlanta, GAThurs., December 11, 2014
• West Palm Beach, FLSat., December 13, 2014
JEFF MARTIN
AUCTIONEERS, INC.
www.jeffmartinauctioneers.com�601-450-6200
• Brooklyn, MSSeptember 11-13, 2014For: 3 Day Early Fall ContractorsAuction (Day One Online Only)
J.M. WOOD
AUCTION COMPANY
www.jmwood.com�800-447-7085
• Montgomery, ALSeptember 10-11, 2014For: Trucks, Construction & ForestryEquipment
MANASSE AUCTIONEERS
www.manasseauctions.com�607-692-4540
• Brant (Buffalo), NYWed., September 3, 2014For: Complete Scrap YardEquipment Liquidation Auction
MARTIN & MARTIN
AUCTIONEERS, INC.
www.mmaauction.com�864-947-7888
• ONLINE ONLYAug.25 – Sept. 3, 2014For: Support Equipment & Misc.items
• ONLINE ONLYTues., September 9, 2014For: Martin’s Backhoe Service
• ONLINE ONLYTues., September 9, 2014For: Swallows Construction
• Pelzer, SCSeptember 24 - 25, 2014For: 2 Day Fall Contractor’s Auction
• Easley, SCWed., October 15, 2014For: One Owner Absolute Auction
PETROWSKY
AUCTIONEERS INC.
www.petrowskyauctioneers.com�860-642-4200
• Tiverton, RISat., August 16, 2014For: Complete Equipment &Inventory Dispersal Auction
• Agawam, MAFri., August 22, 2014For: Complete Equipment DispersalAuction
• West Townsend, MASat., September 13, 2014For: Public Auction Estate of Roy D.Shepherd
• North Franklin, CT
September 26 - 27, 2014For: 2 Day Major Public EquipmentAuction
• Bristol, CT
Wed., October 8, 2014For: Renowned Sand & GravelOperation
• Columbus, OH
Thurs., October 16, 2014For: Area Contractors & EquipmentDealers
PURPLE WAVE AUCTION
www.purplewave.com
�866-608-9283
• ONLINE ONLY
Thurs., August 28, 2014For: Construction Equipment
• ONLINE ONLY
Thurs., September 11, 2014For: Construction Equipment
• ONLINE ONLY
Thurs., September 25, 2014For: Construction Equipment
QUANTOS AUCTIONS
www.quantosauctions.com
253-236-8555
• ONLINE ONLY
August 19 - 21, 2014For: Construction Equipment andmore
RITCHASON AUCTIONEERS INC.
www.ritchason.com
�800-806-3395
• Lebanon, TN
Sat., September 20, 2014For: Heavy Equipment, Trailer,Trucks & Commercial Vehicles
SALES AUCTION COMPANY, LLC
www.salesauctioncompany.com
�860-627-7506
• Windsor Locks, CT
Sat., October 4, 2014For: Construction Equipment
UTILITY AUCTIONS
www.utilityauctions.net
�302-530-9103
• Wilmington, DE
Fri., August 22, 2014For: Construction, Utility & ForestryEquipment
WAYNE PIKE
AUCTION COMPANY
www.waynepikeauction.com
763-389-5700
• Princeton, MN
Sat., September 13, 2014For: Heavy Equipment
• Princeton, MN
Sat., December 6, 2014For: Heavy Equipment
WILSON’S AUCTION SALES
www.wilsonsauction.com
�302-422-3454
• Lincoln, DE
Sat., September 20, 2014For: Mid-Atlantic Fall EquipmentAuction
AuctionsComingTo view information on upcoming auctions visit our
Auction Calendar at www.constructionequipmentguide.com
Page 92 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ritchie Bros. AuctioneersIncorporated announced net earn-ings of $38.6 million, or $0.36 perdiluted share, for the three monthsended June 30, 2014. This is a 30percent increase compared to netearnings of $29.8 million, or $0.28per diluted share, generated in thesame quarter last year. The compa-ny’s revenues for the second quar-ter of 2014 increased 11 percent to$141.8 million compared to$128.3 million for the same periodin 2013, primarily as a result of anincrease in gross auction proceeds(“GAP”). Selling, general and administra-
tive expenses, excluding deprecia-tion and amortization, for the sec-ond quarter of 2014 increased 2percent compared to the same peri-od in 2013. Net earnings for thequarter also benefited from theeffects of a favorable tax rate.For the six months ended June
30, 2014, net earnings were $52.9million, or $0.49 per diluted share.This compares to net earnings of$43.8 million, or $0.41 per dilutedshare, for the six months endedJune 30, 2013, representing a 21percent increase in net earnings.The company’s revenues duringthe first half of 2014 grew 4 per-cent to $240.4 million compared to$230.4 million in the first half of2013.“Revenue and earnings growth
was strong in the quarter and wefully demonstrated the leverage inthe business model with our con-tinued expense control,” said Rob
McLeod, chief financial officer.“Our record second quarter rev-enue was bolstered by strong auc-tion activity across North America— especially in Canada. The mixand age of equipment sold at ourauctions also continued toimprove, enhancing the averageprice per lot.”Ravi Saligram, chief executive
officer, added: “We’re pleased tosee the level of growth in our auc-tion business, which we believecontinues to have significantgrowth prospects. Over the nextseveral quarters, I look forward tofocusing on how we can grow theRitchie Bros. business and expandour market share by further pene-trating our existing markets, withparticular focus on the U.S. andEurope. I am also excited by ournewly developed EquipmentOnesolution, and plan to put a signifi-cant focus on evolving our strategyto achieve its full potential.”During the second quarter of
2014, the company conducted 68
unreserved industrial auctions in14 countries throughout NorthAmerica, Central America,Europe, the Middle East, Australiaand Asia.
Quarterly DividendThe company also announced a
7.7 percent increase in its quarterlycash dividend. The quarterly cashdividend declared increases to$0.14 per common share, payableon Sept. 12, 2014, to shareholdersof record on Aug. 22, 2014.
Gross Auction Proceedsand Revenues
GAP was $1.2 billion for thesecond quarter of 2014, a quarterlyrecord for the company and a 15percent increase compared to thesame quarter of 2013.EquipmentOne, the Company’s
online equipment marketplace,contributed $29.6 million of grosstransaction value (“GTV”) to GAPin the second quarter of 2014 com-pared to $29.1 million in the sec-
ond quarter of 2013. GTV is com-prised of the value of the items soldon EquipmentOne and the feesearned through EquipmentOne’sbuyers’ premiums.For the six months ended June
30, 2014, GAP was $2.1 billion,which is 9 percent higher than inthe first half of 2013.EquipmentOne contributed $48.0million in the first half of 2014compared to $49.5 million in thefirst half of 2013.Revenues grew in the three- and
six-month periods ended June 30,2014 compared to the same peri-ods in 2013 as a result of anincrease in GAP. Revenue rates(revenues as a percentage of GAP)declined due to the performance ofthe company’s underwritten busi-ness. The company’s revenue rateduring the second quarter of 2014was 11.54 percent, which is consis-tent with the company’s historicalaverage, but a decrease from the11.96 percent revenue rateachieved in the same quarter of
2013. The company’s revenue rateduring the six months ended June30, 2014 was 11.53 percent com-pared to 12.01 percent during thesame period in 2013.The company’s underwritten
business, which is comprised ofguarantee and inventory contracts,represented 32 percent of GAP inthe second quarter of 2014, com-pared to 27 percent in the secondquarter of 2013, and 29 percent ofGAP in the first half of 2014 com-pared to 24 percent in the first halfof 2013.
Online Bidding StatisticsRitchie Bros. sold approximate-
ly $840 million of equipment,trucks and other assets to onlinebuyers during the first half of 2014,a 17 percent increase compared tothe same period of 2013. Onlinebuyers represented 40 percent ofGAP during the first half of 2014.Internet bidders comprised over 60percent of the total bidder registra-tions at Ritchie Bros. industrialauctions in the first half of 2014.
Upcoming AuctionsThere are currently 70 unre-
served auctions on the 2014Ritchie Bros. auction calendar atrbauction.com, including auctionsin North America, CentralAmerica, Europe, the Middle Eastand Australia.
(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)
IronPlanet was awarded the U.S. Defense LogisticsAgency (DLA) contract to manage and sell rolling stocksurplus assets of the U.S. Department of Defense (DoD)(Surplus Contract). The DLA issued the final contractaward to IronPlanet on July 25, 2014, pursuant to a com-petitive bid process that was held on April 1, 2014.Bids for the surplus contract were based on a percentage
of the sales price of the items that bidders will share withthe DLA. IronPlanet estimates $50 to $70 million of rollingstock annually, and its bid was equal to 75.29 percent rev-enue share to the DLA. The surplus contract has a base termof two years with four one-year renewal options. Following
the bid process, Liquidity Services Inc. filed a bid protestwith the Government Accountability Office (GAO). Thisprotest and supplemental protests filed were denied by theGAO on July 23, 2014.“We are very pleased and excited to be officially award-
ed this contract, and to partner with the Defense LogisticsAgency. We have already begun moving forward leverag-ing our existing infrastructure and resources to build thededicated capabilities necessary to maximize the returns forthe U.S. Department of Defense, and ultimately the U.S.taxpayer, in selling their surplus rolling stock assets,” saidGreg Owens, CEO, IronPlanet. “IronPlanet’s nearly 15years of experience in selling equipment positions us well
to meet our objectives in driving value for the DLA and theU.S. Department of Defense as well as building out addi-tional inventory management capabilities for others acrossthe public sector.”Rolling stock includes surplus trucks, trailers, generators,
wheel loaders, cranes, crawler tractors, and other equip-ment. While surplus contract volume will begin to flow toIronPlanet in the third quarter of 2014, the contract is sched-uled to fully commence late 2014 into 2015.For more information, visit www.ironplanet.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
IronPlanet Awarded Contract for U.S. DoD Surplus Assets
“Over the next several quarters, I look forward to focusing onhow we can grow the Ritchie Bros. business and expand ourmarket share by further penetrating our existing markets, withparticular focus on the U.S. and Europe.”
Ravi SaligramRitchie Bros. Auctioneers
Ritchie Bros. Auctioneers Announces 30 Percent Growth
BUY ONLINE
The new way to buyused equipment
Visit allEquip.com
2005 Magnum MLT3060MMH$2,000
2008 Bobcat 2200 4x4 $5,500
2006 Mitsubishi FG25N $9,500
2007 UpRight TM-12$1,500
2008 John Deere 17D$11,900
2006 JLG G9$43,500
2008 John Deere$7,800
Excavators | Landscape Equipment | Generators | Trenching Equipment | Sweepers/Scrubbers | and much more!
Low, no-haggle pricing. Inspected. Ready for work. Guaranteed.
2008 John Deer$11,900
e 17D ohn Deer e $11,900
2006 JLG G9$43,500
2006 JLG G9$43,500
2008 John Deer$7,800
e er re
2007 UpRight TM-12$1,500
2006 Mitsubishi FG25N2007 UpRight TM-12$1,500
2006 Mitsubishi FG25N $9,500
2008 Bobcat 2200 4x4 $5,500
2005 Magnum ML$2,000
2008 Bobcat 2200 4x4
T3060MMH ML LT3060MMH$2,000
ed arEquipment featur
Excavators | Landscape Equipment | Generators | T
esentation of items available on allEquip. Items arepre a red ar
Excavators | Landscape Equipment | Generators | T
e sold and added to inventory dailyesentation of items available on allEquip. Items ar
enching Equipment | Sweepers/Scrubbers | and much morrExcavators | Landscape Equipment | Generators | T
e sold and added to inventory daily
enching Equipment | Sweepers/Scrubbers | and much mor
.
isit V allEquip.com
e sold and added to inventory daily
enching Equipment | Sweepers/Scrubbers | and much mor
allEquip.com
e!enching Equipment | Sweepers/Scrubbers | and much mor
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 93
Page 94 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ritchie Bros. Morris Sale Attracts More Than 2,000 Bidders
Ben Arbeiter (L), Ritchie Bros. Auctioneers, and JayGermann, used equipment manager, Roland Machinery Co.
This Cat 322C excavator caught theattention of Bobby Ingram, MBIConstruction.
John Hagan, Landview Excavating, runs thisCat 345B excavator.
Guillermo (L) and Fancisco Dyck came all the way fromChihuahua, Mexico, to the sale in Morris, Ill.
Jerry Lambert (L) and Troy Coble, bothof Asphalt Shingle Grinding Service,head out to the auction yard to lookover the iron at the sale.
Dan Plote, president of Plote Construction Inc., looks over thecab of this Cat 336E excavator.
Ryan and Kelly Amos of Amos excavation camedown from Toronto, Canada, to see if they couldgrab a deal or two.
Bob Bazzetta (L), used equipment manager of West Side TractorSales Co., and Kevin Gawne, used sales representative, West SideTractor Sales Co., check over the articulated trucks.
More than 2,000 bidders participat-ed online and in person at RitchieBros. Auctioneers’ multi-million
dollar unreserved public equipment auc-tion in Chicago, Ill., on July 31.Bidders came from 43 countries, includ-
ing all 50 U.S. states. More than 66 percentof the equipment was sold to out-of-statebuyers, from as far away as Spain,Guatemala and the United Arab Emirates.Online bidders purchased 36 percent of theequipment sold (by dollar value).In total, more than 1,300 equipment
items were sold in the auction, includingexcavators, crawler tractors, combines,agricultural tractors, truck tractors andmore.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 95
Page 96 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
said Ken Simonson, the association’s chiefeconomist. “Some metro areas are addingworkers at a strong clip, but the gains remainmodest and sporadic in many localities.”Dallas-Plano-Irving, Texas, added the
largest number of construction jobs in thepast year (11,700 jobs, 10 percent), followedby Los Angeles-Long Beach-Glendale,Calif. (10,000 jobs, 9 percent), Chicago-Joliet-Naperville, Ill. (8,200 jobs, 7 percent)and Baton Rouge, La. (5,900 jobs, 13 per-cent). The largest percentage gains occurredin Monroe, Mich. (29 percent, 600 jobs),Lake Charles, La. (25 percent, 2,700 jobs),Pascagoula, Miss. (25 percent, 1,500 jobs)and El Centro, Calif. (23 percent, 500 jobs).The largest job losses from June 2013 to
June 2014 were in Bethesda-Rockville-Frederick, Md. (minus 4,200 jobs, minus13 percent), followed by Phoenix-Mesa-Glendale, Ariz. (minus 2,900 jobs, minus 3percent), Gary, Ind. (minus 2,300 jobs,minus 12 percent) and Putnam-Rockland-Westchester, N.Y. (minus 1,800 jobs, minus6 percent). The largest percentage decline forthe past year was in Cheyenne, Wyo. (minus
18 percent, minus 700 jobs), followed byBethesda-Rockville-Frederick, Vineland-Millville-Bridgeton, N.J. (minus 13 percent,minus 300 jobs), Gary, and Steubenville-Weirton, Ohio-W.V. (minus 12 percent,minus 200 jobs).El Centro experienced the largest percent-
age increase (23 percent, 500 jobs higherthan June 2013) among the 26 metro areas
that topped their prior June constructionemployment highs. Baton Rouge added themost jobs since reaching its prior June peakin 2013 (5,900 jobs, 13 percent). Phoenix-Mesa-Glendale (minus 93,700 jobs, minus50 percent) experienced the largest drop intotal construction employment compared toits prior June peak (reached in 2006) whileLake Havasu City-Kingman, Ariz. experi-
enced the largest percentage decline com-pared to its June 2006 peak (minus 68 per-cent, minus 5,400 jobs).Association officials noted that signs of
uncertainty about a range of federal infra-structure and construction programs couldundermine future construction employmentgrowth. They urged Congress to quicklypass a “continuing resolution” that would setfederal spending levels for next year and toenact long-term surface transportation legis-lation. Having these measures in placewould make it easier for many constructionfirms to make hiring, purchasing and expan-sion plans, they added. “Even as the overall economy continues
to recover, many firms that work on federal-ly-funded projects are having a hard timemaking hiring, equipment purchasing andexpansion plans,” said Stephen E. Sandherr,the association’s chief executive officer. “Itis hard to make sound business decisionswhen you don’t know how much work willbe available in the near future.”
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
EMPLOYMENT from page 1
“Even as the overall economy continues to recover,many firms that work on federally-funded projects arehaving a hard time making hiring, equipmentpurchasing and expansion plans. It is hard to makesound business decisions when you don’t know howmuch work will be available in the near future.”
Stephen E. SandherrAssociated General Contractors of America
Association Officials Note Uncertainty of Employment
such as Missouri, where theLegislature has been cuttingincome taxes. “Tax increases are very, very
hard to pass,’’ said Missouri Sen.Mike Kehoe, a Republican whosupports the measure on the Aug.5th ballot for a three-quarters centsales tax increase. “But I think thatpeople do look at infrastructure dif-ferently ... as an investment.’’ Congress agreed July 31 to a 10-
month funding patch for the feder-al Highway Trust Fund, which wasrunning out of money to cover allof its commitments to the states.But a long-term plan remains unre-solved, and the stalemate alreadyhas caused delays for some proj-ects such as highway improve-ments in Tennessee and bridgereplacements in Arkansas. Federalmoney accounts for more than aquarter of states’ total spending onhighways and transit infrastruc-ture, according to the PewCharitable Trusts. “I just don’t think we can count
on any more federal dollars com-ing in than what we’re currentlygetting, and we should assume that
money is going to drop,’’ said Rep.Dave Hinson, a Republican whosponsored Missouri’s proposedtransportation sales tax. States are already facing short-
falls in their own transportationrevenue. The U.S. Department of
Transportation estimates that gov-ernments would need to spend asmuch as 50 percent more to pay forall of the work needed on roads,bridges and mass transit. In Michigan, two-thirds of the
roads are projected to be in poorcondition by 2020, yet a proposedtax hike has stalled. Missouri’s highway budget is
projected to plummet from a recenthigh of $1.3 billion annually to$325 million by 2017. There is noPlan B to replace that money if vot-ers don’t approve a sales tax that isprojected to raise at least $540 mil-lion annually. Construction contractors, labor
unions, engineering firms and oth-ers have poured more than $4 mil-lion into the Missouri sales taxcampaign and have outspent oppo-nents by a more than 100-to-1ratio. The advertising blitz is a
necessity because Missouri votershave a history of rejecting taxincreases. Opposition is coming both from
staunch conservatives, who opposemost tax hikes, and strident liber-als, who fear the sales tax would hitthe poorest the hardest whiledemanding nothing from the heav-iest highway users. The sales taxhike wouldn’t apply to tractor-trail-er rigs, which were exemptedunder a 2012 law. “The absurdity of it is if you go
out and buy your child a toy truck,and then you go out and buy an 18-wheeler, you’re going to pay more
road tax on the toy truck than youare for the 18-wheeler,’’ saidThomas R. Shrout Jr., a St. Louisconsultant who is treasurer of theopposition group. Transportation tax increases
already have run into problems insome states. Last year, voters innine of Georgia’s 12 transportationdistricts defeated a sales tax hike,and Seattle area voters rejected atransportation sales tax and vehiclefee increase in April. Other states have pushed ahead
with increases without puttingthem to a vote of the people. New Hampshire Gov. Maggie
Hassan, a Democrat, signed a 4-cent-a-gallon fuel tax increase thattook effect in July, the first suchincrease since 1991. RepublicanWyoming Gov. Matt Mead signedlegislation last year raising the fueltax to 24 cents a gallon from the14-cent rate. Significant transportation fund-
ing measures were enacted recent-ly in Maryland, Massachusetts,Pennsylvania and Virginia. Texasvoters will decide in Novemberwhether to divert about $1 billionannually from the state’s RainyDay Fund to transportation. In many states, the funding
plans have taken several years ofbipartisan coalition-building, saidTony Dorsey, spokesman for theAmerican Association of StateHighway and TransportationOfficials. “States are realizing that they
have to fund transportation proj-ects in big ways — you know, oursystem is aging,’’ Dorsey said.
(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)
TAXES from page 1
“I just don’t think we can count on anymore federal dollars coming in than whatwe’re currently getting, and we shouldassume that money is going to drop.’’
Dave HinsonMissouri State Representative
Voters Look at Infrastructure as Investment, Says Kehoe
Find us online:Find us online:
2004 WESTERN STAR 4900FA
TN FIRM # 2048
1999 CAT D6R XL 2002 VOLVO VND
ththththththththhhhhhhhhhth
Live Online Bidding www.iraymn.comThe “Biggest & Best” Heavy Equipment,
Truck & Trailer Auction in MN!
Accepting Consignments until Saturday, Sept 6 Excavators, Dozers, Loaders, Semis, Trucks, Trailers & Related Equipment
CALL: 877-968-7230 Email: [email protected]. Raymond S. Henry - MN Lic.#05-14-011; WI Lic.#2490-52Real Estate Auctioneer & GPPA Certified Equipment Appraiser
Showcase Equipment:
Sell your surplus!Sell your surplus!Friday, Sept. 12Friday, Sept. 12thth •• 8:00am 8:00am
AcAcce tptining g CConsiignmnmenentts unttilil S Satatururdadayy, S Sepept t 66Excavators, Dozers Loaders Semis, Trucks Trailers & Related Equipment
See it, Bid on it, Buy it • www.iraymn.comSee it, Bid on it, Buy it • www.iraymn.com
’84 JD 544C ’90 Phelan - 60 Ton
Surf theInternet to the News,Equipment and all theinformationyou need to
keep up with the
Constructionindustry
@www.construc-tionequipment-
guide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 16, 2014 • Page 97
Page 98 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
AIR EQUIPMENT RENTAL CORP......................................................20ALEX PARIS CONTRACTING CO INC ................................................9ALLIED CONSTRUCTION ..................................................................77ALLU GROUP ....................................................................................54AMERICAN STATE EQUIPMENT ........................................................7ARING EQUIPMENT CO INC ............................................................15ARTIC SNOW & ICE CONTROL ........................................................57ASC CONSTRUCTION EQUIP USA ........................................10,11,27BANDIT INDUSTRIES INC ................................................................76BARGAINS ....................................................................................87,88CATERPILLAR INDUSTRIAL AND WASTE ..................................74,75CEG SCALE MODELS........................................................................26CK POWER ........................................................................................20CLASSIFIEDS ....................................................................................89CLEARSPAN FABRIC STRUCTURES ..............................................35COMPANY WRENCH..........................................................................29CONSTRUCTION EQUIPMENT GUIDE..............................32,50,56,95DOOSAN INFRACORE AMERICA CORP ....................................68,69DOOSAN PORTABLE POWER ..........................................................47DOPPSTADT ......................................................................................84DYNAPAC............................................................................................62ERB EQUIPMENT ..............................................................................13FABCO EQUIPMENT INC ....................................................................2FARM-RITE EQUIPMENT INC..............................................................8FELLING TRAILERS ......................................................................44,45FINKBINER EQUIPMENT CO ..............................................................7FLANGE LOCK ..................................................................................23FLUID CONTROL SERVICES ............................................................33FOLEY EQUIPMENT CO ....................................................................31FURY MOTORS ..................................................................................41GARY CARLSON EQUIPMENT..........................................................16GROVE WORLDWIDE (CRANE ) ......................................................99HOWELL TRACTOR & EQUIPMENT CO ........................................100HYDRAULICIRCUIT TECHNOLOGY..................................................59ILLINOIS TRUCK & EQUIPMENT ........................................................3INDEXATOR INC ................................................................................55IRAY AUCTION
FOLEY MN 09/12 ......................................................................97IROCK CRUSHERS ............................................................................72IRON PLANET ....................................................................................93JEFF BELZERS CHEVROLET ......................................................40,43JOHN DEERE ....................................................................................51KAWASAKI CONSTRUCTION MACHINERY......................................61KLEEMAN............................................................................................81KOMATSU AMERICA CORP..........................................................64,65KPI-JCI ................................................................................................83
KUBOTA ..............................................................................................63LEADING EDGE ATTACHMENTS INC ..............................................57MCCANN INDUSTRIES INC ................................................................6METSO MINERAL CRUSHING ..........................................................73METSO MINERAL SCREENING ........................................................85MID COUNTRY MACHINERY ............................................................21MIDWEST READY MIX & EQUIPMENT ............................................17MISSISSIPPI VALLEY ........................................................................33MUSTANG MFG..................................................................................46NORAM ..........................................................................................48,49NORTRAX-MIDWEST ....................................................................23,25NTS TIRE SUPPLY ............................................................................38PEMBERTON INC ..............................................................................57POWERSCREEN MW DEALER ........................................................82PURPLE WAVE INC
CONSTRUCTION EQUIPMENT INTERNET AUCTION 08/28 ..97RANSOME EQUIPMENT SALES LLC................................................90RDO EQUIPMENT/SCHARBER EQUIPMEN ....................................24REDI-HAUL TRAILERS INC................................................................40RITCHASON AUCTIONEERS
LEBANON TN 09/20 ..................................................................97ROAD BUILDERS MACHINERY & SUPPLY ..................................6,19ROGERS BROTHERS CORP ............................................................42ROLAND MACHINERY INC..................................................................5SANDVIK MINING & CONSTRUCTION ............................................59SCHAEFER ENTERPRISES ..............................................................54SENNEBOGEN ..................................................................................79SMITHCO ............................................................................................42STAR EQUIPMENT LTD ......................................................................6SULLIVAN PALATEK ..........................................................................35SUPERIOR INDUSTRIES ..................................................................78TEREX CRANES ................................................................................67TEREX FUCHS ..................................................................................80TITAN RENTS ....................................................................................35TOWMASTER INC ............................................................................39WANTED ............................................................................................90ZIPS TRUCK EQUIPMENT ................................................................40
OHIO STATE SUPPLEMENTBOBCAT ENTERPRISES......................................................................5COLUMBUS EQUIPMENT CO ............................................................8EQUIPMENT CORP OF AMERICA ......................................................5JCB OF OHIO........................................................................................2MURPHY TRACTOR & EQUIPMENT CO ............................................7RUDD EQUIPMENT..............................................................................3THE MCLEAN CO..............................................................................4,6
To read articles about these CEG advertisers, visit www.constructionequipmentguide.com
CONSTRUCTION�EQUIPMENT�GUIDE�•�www.constructionequipmentguide.com�• August�16,�2014�•�Page�99
12920 Gravois RoadSt Louis, MO 63127
314/729-0125
12321 E. Pine StreetTulsa, OK 74116918/438-1700
6715 W. RenoOklahoma City, OK 73127
405/495-7820
Kansas City, KS913/850-6300877/851-5729
Cleveland Crane & Shovel Sales, Inc.26781 Cannon RoadCleveland, OH 44146
440/439-4749800/362-8494
Fax:�440/439-2177
www.craneandshovel.net
930 W 138th StreetRiverdale, IL 60827
708/656-7700Fax: 708/532-127325210 Brest RoadTaylor, MI 48180734/947-9250
Fax: 734/947-9260
920 S State Road 39Lebanon, IN 46052
765/482-4145Fax: 765/482-4928
3400 Claremont AvenueEvansville, IN 47712
812/422-6912Fax: 812/422-6982
Aspen EquipmentCompany
www.aspenequipment.com1525 S.E. Cortina Dr.Ankeny, IA 50021515/965-1000
Fax: 515-965-179011475 S. 153rd St.Omaha, NE 68138402/894-9300
Fax: 402-894-9302
Kirby Smith Machinery Inc. Walter Payton Power Equipment LLC
RT9150E rough-terrain craneAt Grove, we provide high-performance features, reliable / support and a quality product lineup – because cranes are all we do. With rough-terrain models ranging from - USt, we’ve got a crane to handle any jobsite.
Featured is the RTE – its USt capacity and ft. boom combination provide the best capacity and longest boom in its class.
For more information, visit www.manitowoccranes.com
LEADERS IN LIFTING
Tiltable cab Superior boom design Removable outrigger boxes
Page 100 • August 16, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE