2 3
PRESENTATIONMovement Caliber : 1069
Movement Caliber 1069
Display ElementsMinute HandHour HandSecond Hand
Control ButtonsCrown Positions:1. Normal position2. Setting of hour, minute
1 2
4 5
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 1069
1.1
1.2 1.3
6 7
Movement Caliber 2330 / 130 & 763
PRESENTATIONMovement Caliber : 2330 / 130 & 763
Display ElementsMinute HandHour HandSecond HandDate
Control ButtonsCrown Positions:1. Normal position2. Quick correction of date3. Setting of hour, minute, date
1 2 3
8 9
Setting the Time
1.1 Pull the crown to position 3.
1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 2330 / 130 & 763
1.1
1.2 1.3
10 11
Quick Correction of Date
3.1 Set the crown to position 2.
3.2 Turn the crown clockwise step-by-step to the desired date.
3.3 Push the crown back to position 1.
!! Attention !! Please Do Not set between 21:00 and 00:30.
SETTINGSMovement Caliber : 2330 / 130 & 763
2.1
2.2 2.3
12 13
Movement Caliber 3540.D
PRESENTATION
INFO
Movement Caliber : 3540.D
Crown Positions:1. Normal position2. Quick correction of date3. Correction of hour, minute, day, date and second time zone / 24-hour
Display ElementsMinute HandCenter Stop-Second1/10 Second Counter (Hour counter after 30 minutes)
Hour HandMinute CounterSecond HandDate
Push Button A
Push Button BBattery: 384 (diametaer 7.9mm x 3.6mm / SR 41 Accuracy: +20 / -10 seconds per monthSW)
Control Buttons
1 2 3
14 15
Setting the Time
➊ Pull out the crown to position 3 (the watch stops).*
➋ Turn the crown until you reach the correct time 8:45.
➌ Push the crown back into position 1.*
SETTINGSMovement Caliber : 3540.D
1.1 1.2Please note* In order to set the time to the exact second, ➊ must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set , ➌ must be pushed back into position 1 at the exact second.
➊ ➌
➋
16 17
Setting the Date (Quick Mode)
➊ Pull out the crown to position 2 (the watch continues to run).
➋ Turn the crown until the correct date 1 appears.
➌ Push the crown back into position 1.
SETTINGSMovement Caliber : 3540.D
Please note:The date can be changed during the date changing phase between 8:30 PM and 12:00 PM; please note that the date must be set to the date of the following day as in this case, the automatic date changing does not occur at midnight.
2.1 2.2
➊ ➌
➋
18 19
Setting the Date / TimeExample:– Date / time on the watch: 17 / 1:25 AM– Present date / time: 4 / 8:30 PM➊ Pull out the crown to position 2 (the watch continues to run).➋ Turn the crown until yesterday's date appears 3 .➌ Pull out the crown to position 3 (the watch stops).*➍ Turn the crown until the correct date 4 appears.➎ Continue to turn the crown until the correct time 8:30 PM appears.**➏ Push the crown back into position 1.
SETTINGSMovement Caliber : 3540.D
3.3
3.1
3.4
3.2
➊
➏
➍➎
➌
➋
Please note:* To set your watch to the exact second, please refer to chapter titled “Setting the Time”.** Please observe the AM / PM clock rhythm.
20 21
FUNCTIONSMovement Caliber : 3540.D
4.1 4.2
A ➊ ➋
B ➌
Chronograph: Basic Function (Start / Stop / Reset)
Example:
➊ Start: Press push button A.
➋ Stop: To stop the timing, press push button A once more and read the 3 chronograph counters: 4 min / 38 sek / 7/10 sec
➌ Zero positioning: Press push button B. (The 3 chronograph hands will be reset to their zero position).
22 23
FUNCTIONSMovement Caliber : 3540.D
5.1 5.2
A➊➋➌➍
B ➎
Chronograph: Accumulated TimingExample:➊ Start: (start timing)
➋ Stop: (e.g. 15 min 5 sec following ➊ )
➌ Restart: (timing is resumed)
➍ Stop: (e.g. 13 min 5 sec following ➌ ) = 28 min 10 sec (The accumulated measured time is shown)*➎ Reset: The 3 chronograph hands are returned to their zero position.
Please note:* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)
24 25
FUNCTIONSMovement Caliber : 3540.D
6.1 6.2
A➊➍
B➋➌
B ➎
Chronograph: Intermediate or Interval TimingExample:➊ Start: (start timing)
➋ Display interval: e.g. 10 minutes 10 seconds (timing continues in the background)
➌ Making up the measured time: (the 3 chronograph hands are quickly advanced to the ongoing measured time).➍ Stop: (Final time is displayed)
➎ Reset: The 3 chronograph hands are returned to their zero position.
Please note:* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)
26 27
7.1
7.2 7.3
CALIBRATIONMovement Caliber : 3540.D
Adjusting the Chronograph Hands to Zero PositionExample:One or several chronograph hands are not in their correct zero position and have to be adjusted (e.g. following a battery change).➊ Pull out the crown to position 3 (all 3 chronograph hands are in their correct or incorrect zero position).➋ Keep push-buttons A and B depressed simultaneously for at least 2 seconds (the center stop-second rotates by 360° ➡ corrective mode is activated).Adjusting the center stop second ➡ Single step A1 x short ➡ Continuous A long ➡ Adjusting the next hand B ➡ Adjusting the 1/10 second counter hand (position 6h) ➡ Single step A1 x short ➡Continuous A long ➡ Adjusting the next hand B ➡ Adjusting the minute counter (position 9h) ➡Single step A1 x short ➡ Continuous A long
➌ Returning the crown to position 1. Termination of the chronograph hands adjustment can be carried out at any time.
➊
➌
A ➋
B ➋
28 29
Movement Caliber 5040.D
INFO Battery: 395 (diameter 9.5mm x 2.6mm / SR 927 SW) Accuracy: +20 / -10 seconds per month
PRESENTATIONMovement Caliber : 5040.D
Crown Positions:1. Normal position2. Quick correction of date3. Correction of hour, minute, day, date and second time zone / 24-hour
Display ElementsMinute HandCenter Stop-SecondSecond HandHour HandMinute Counter1/10 Second Counter(Hour counter after 30 minutes)
Date Window
Push Button AQuick correction of month
Push Button BQuick correction of secondtime zone / 24-hour
Control Buttons
1 2 3
30 31
Setting the Time
➊ Pull out the crown to position 3 (the watch stops).*
➋ Turn the crown until you reach the correct time 8:45.
➌ Push the crown back into position 1.*
SETTINGSMovement Caliber : 5040.D
Please note* In order to set the time to the exact second, ➊ must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set, ➌ must be pushed back into position 1 at the exact second.
1.1 1.2
➊ ➌
➋
32 33
2.1 2.2
➊ ➌
➋
Setting the Date (Quick Mode)
➊ Pull out the crown to position 2 (the watch continues to run).
➋ Turn the crown until the correct date 1 appears.
➌ Push the crown back into position 1.
SETTINGSMovement Caliber : 5040.D
Please note:The date can be changed during the date changing phase between 8:30 PM and 12:00 PM; please note that the date must be set to the date of the following day as in this case, the automatic date changing does not occur at midnight.
34 353.3
3.1
3.4
3.2
➊
➏
➍➎
➌
➋
Setting the Date / TimeExample:– Date / time on the watch: 17 / 1:25 AM– Present date / time: 4 / 8:30 PM➊ Pull out the crown to position 2 (the watch continues to run).➋ Turn the crown until yesterdays date appears 3 .➌ Pull out the crown to position 3 (the watch stops).*➍ Turn the crown until the correct date 4 appears.➎ Continue to turn the crown until the correct time 8:30 PM appears.**➏ Push the crown back into position 1.
SETTINGSMovement Caliber : 5040.D
Please note:* To set your watch to the exact second, please refer to chapter titled “Setting the Time”.** Please observe the AM / PM clock rhythm.
36 37
4.1 4.2
A ➊ ➋
B ➌
FUNCTIONSMovement Caliber : 5040.D
Chronograph: Basic Function (Start / Stop / Reset)
Example:
➊ Start: Press push button A.
➋ Stop: to stop the timing, press push button A once more and read the 3 chronograph counters: 4 min / 38 sek / 7/10 sec
➌ Zero positioning: Press push button B. (The 3 chronograph hands will be reset to their zero position).
38 39
5.1 5.2
A➊➋➌➍
B ➎
FUNCTIONSMovement Caliber : 5040.D
Chronograph: Accumulated TimingExample:➊ Start: (start timing)
➋ Stop: (e.g. 15 min 5 sec following ➊ )
➌ Restart: (timing is resumed)
➍ Stop: (e.g. 13 min 5 sec following ➌ ) = 28 min 10 sec (The accumulated measured time is shown)*➎ Reset: The 3 chronograph hands are returned to their zero position.
Please note:* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)
40 41
6.1 6.2
A➊➍
B➋➌
B ➎
FUNCTIONSMovement Caliber : 5040.D
Chronograph: Intermediate or Interval TimingExample:➊ Start: (start timing)
➋ Display interval: e.g. 10 minutes 10 seconds (timing continues in the background)
➌ Making up the measured time: (the 3 chronograph hands are quickly advanced to the ongoing measured time).➍ Stop: (Final time is displayed)
➎ Reset: The 3 chronograph hands are returned to their zero position.
Please note:* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)
42 43
7.1
7.2 7.3
CALIBRATIONMovement Caliber : 5040.D
Adjusting the Chronograph Hands to Zero PositionExample:One or several chronograph hands are not in their correct zero position and have to be adjusted (e.g. following a battery change).➊ Pull out the crown to position 3 (all 3 chronograph hands are in their correct or incorrect zero position).➋ Keep push-buttons A and B depressed simultaneously for at least 2 seconds (the center stop-second rotates by 360° ➡ corrective mode is activated).Adjusting the center stop second ➡ Single step A1 x short ➡ Continuous A long ➡ Adjusting the next hand B ➡ Adjusting the 1/10 second counter hand (position 6h) ➡ Single step A1 x short ➡Continuous A long ➡ Adjusting the next hand B ➡ Adjusting the minute counter (position 9h) ➡Single step A1 x short ➡ Continuous A long
➌ Returning the crown to position 1. Termination of the chronograph hands adjustment can be carried out at any time.
➊
➌
A ➋
B ➋
44 45
Movement Caliber 6497
PRESENTATIONMovement Caliber : 6497
Display ElementsMinute HandHour HandSecond Hand
Control ButtonsCrown Positions:1. Normal position2. Setting of hour, minute
1 2
46 47
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 6497
1.1
1.2 1.3
48 49
Movement Caliber 7004.P
PRESENTATIONMovement Caliber : 7004.P
Display ElementsDateMinute HandDayHour HandSecond Hand Control Buttons
Crown Positions:1. Normal position2. Setting of hour, minute, day
INFO Battery: 381 (diameter 11.6mm x 2.15mm)
1 2 3
50 51
Setting the Time
1.1 Pull the crown to position 3.
1.2 Turn the crown to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 7004.P
1.1
1.2 1.3
52 53
Setting the Date (Quick Mode)
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.
2.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 7004.P
2.1
2.2 2.3
Please note:An extreme acceleration in setting the date with quick mode can create a false date indication. The synchronization is re-established by setting the date from 01 till 31 (crown position 2).
54 55
Setting the Day (Quick Mode)
3.1 Set the crown to position 3.
3.2 Turn the crown clockwise to advance the day hand until the desired day is set.
3.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 7004.P
3.1
3.2 3.3
Please note:70% of power is saved when the crown is pulled out.
56 57
Movement Caliber 7750
PRESENTATIONMovement Caliber : 7750
Display Elements30 Minute CounterMinute HandHour HandSecond Hand60 Second HandDayDate
Control ButtonsCrown Positions:1. Normal position2. Setting of hour, minute, day
1 2 3
58 59
Crown 3 Positions
Rapid date and day correction is not possible between 8 p.m. and 2 a.m.
1. Normal running of watch and hand-winding
2. Rapid correction of the date Rapid correction of the day
3. Position for setting the time with stop second and correction of the date at every passing of midnight
SETTINGSMovement Caliber : 7750
1.1
Please note:The movement of the wrist winds the watch.
A
B
60 61
FUNCTIONSMovement Caliber : 7750
Simple Timing FunctionSetting crown in position 1
➊ to ➌ order of functions➊ START➋ STOP : Read time - 2 hours, 10 minutes, 8 seconds ➌ Reset to zero
2.1
➊➋
➌
62 63
FUNCTIONSMovement Caliber : 7750
ADD FunctionSetting crown in position 1➊ to order of functions➊ START➋ STOP Read➌ RESTART➍ STOP Read➎ RESTART➏ STOP Read ••• Reset to zero
3.1
➊➋
➌➍
➎➏ ••••••
64 65
Movement Caliber 7751
PRESENTATIONMovement Caliber : 7751
Display ElementsMinute HandMonth Indicator30 Minute CounterDay IndicatorHand HourSecond Hand24 Hour Hand60 Second HandMoon Phase Indicator12 Hour CounterDate Hand
Crown Positions:1. Normal position2. Correction of hour, minute, day, date and second time zone / 24-hour
Push Button BSplit / Reset
Control ButtonsPush Button C (Option)Quick correction of day
Push Button AQuick correction of date.
1 2 3
66 67
Crown 3 PositionsDate correction is not recommended between 10 p.m. and 2 p.m. The moon phase cannot be corrected between 3 a.m. and 4 a.m. 1. Normal running of watch and hand-winding2. Rapid correction of the date Rapid correction of the moon phase3. Position for setting the time with stop second and correction of the date at every passing of midnight
SETTINGSMovement Caliber : 7751
1.1
Please note:The movement of the wrist winds the watch.
A
B
68 69
FUNCTIONSMovement Caliber : 7751
Simple Timing FunctionSetting crown in position 1
➊ to ➌ order of functions➊ START➋ STOP : Read time - 4 hours, 10 minutes, 8 seconds ➌ Reset to zero
2.1
➊➋
➌
70 71
FUNCTIONSMovement Caliber : 7751
ADD FunctionSetting crown in position 1➊ to order of functions➊ START➋ STOP Read➌ RESTART➍ STOP Read➎ RESTART➏ STOP Read ••• Reset to zero
3.1
➊➋
➌➍
➎➏ ••••••
72 73
Movement Caliber 8040.N
INFO
Movement Caliber : 8040.N
Crown Positions:1. Normal position2. Quick correction of date3. Correction of hour, minute, day, date and second time zone / 24-hour
Display ElementsMinute HandDayHour HandMinute CounterCenter Stop-SecondSecond Hand1/10 Second Counter (Hour counter after 30 minutes)
Date
Push Button A
Push Button BBattery: 384 (diametaer 7.9mm x 3.6mm / SR 41 Accuracy: +20 / -10 seconds per monthSW)
Control Buttons
1 2 3
74 75
Setting the Time
➊ Pull out the crown to position 3 (the watch stops).*
➋ Turn the crown until you reach the correct time 8:45.
➌ Push the crown back into position 1.*
SETTINGSMovement Caliber : 8040.N
1.1 1.2Please note* In order to set the time to the exact second, ➊ must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set , ➌ must be pushed back into position 1 at the exact second.
➊ ➌
➋
76 77
Setting the Date (Quick Mode)
➊ Pull out the crown to position 2 (the watch continues to run).
➋ Turn the crown counter clockwise until the correct date 1 appears.
➌ Push the crown back into position 1.
Movement Caliber : 8040.N
Please note:During the date changing phase between 9 PM and 12 PM; the date must be set to the date of the following day. An extreme acceleration in setting the date with quick mode can create a false date indication. The synchronization is re-established by setting the date from 01 till 31 (crown in position 2).
2.1 2.2
➊ ➌
➋
SETTINGS
Setting the Date / Weekday and TimeExample:– Date / time on the watch: 17 / 1:25 AM / MON– Present date / time: 23 / 20:30 PM / SAT➊ Pull out the crown to position 3 (the watch stops).➋ Turn the crown until yesterday’s weekday FRI appear.➌ Pull out the crown to position 3.➍ Turn the crown backwards until yesterday’s date appears 22 .➎ Pull out the crown to position 3 (the watch stops).*➏ Turn the crown until the correct date 23 and weekday SAT appears.➐ Continue to turn the crown until the correct time 8:35 PM appears.**➑ Push the crown back into position 1.
SETTINGSMovement Caliber : 8040.N
Please note:* To set your watch to the exact second, please refer to chapter titled “Setting The Time”.** Please observe the AM / PM clock rhythm.
78
80 81
4.1 4.2
A ➊ ➋
B ➌
FUNCTIONSMovement Caliber : 8040.N
Chronograph: Basic Function (Start / Stop / Reset)
Example:
➊ Start: Press push button A.
➋ Stop: To stop the timing, press push button A once more and read the 3 chronograph counters: 4 min / 38 sek / 7/10 sec
➌ Zero positioning: Press push button B. (The 3 chronograph hands will be reset to their zero position).
82 83
5.1 5.2
A➊➋➌➍
B ➎
FUNCTIONSMovement Caliber : 8040.N
Chronograph: Accumulated TimingExample:➊ Start: (start timing)
➋ Stop: (e.g. 15 min 5 sec following ➊ )
➌ Restart: (timing is resumed)
➍ Stop: (e.g. 13 min 5 sec following ➌ ) = 28 min 10 sec (The accumulated measured time is shown)*➎ Reset: The 3 chronograph hands are returned to their zero position.
Please note:* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)
84 85
6.1 6.2
A➊➍
B➋➌
B ➎
FUNCTIONSMovement Caliber : 8040.N
Chronograph: Intermediate or Interval TimingExample:➊ Start: (start timing)
➋ Display interval: e.g. 10 minutes 10 seconds (timing continues in the background)
➌ Making up the measured time: (the 3 chronograph hands are quickly advanced to the ongoing measured time).➍ Stop: (Final time is displayed)
➎ Reset: The 3 chronograph hands are returned to their zero position.
Please note:* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)
86 87
7.1
7.2 7.3
➊
➌
A ➋
B ➋
CALIBRATIONMovement Caliber : 8040.N
Adjusting the Chronograph Hands to Zero PositionExample:One or several chronograph hands are not in their correct zero position and have to be adjusted (e.g. following a battery change).➊ Pull out the crown to position 3 (all 3 chronograph hands are in their correct or incorrect zero position).➋ Keep push-buttons A and B depressed simultaneously for at least 2 seconds (the center stop-second rotates by 360° ➡ corrective mode is activated).Adjusting the center stop second ➡ Single step A1 x short ➡ Continuous A long ➡ Adjusting the next hand B ➡ Adjusting the 1/10 second counter hand (position 6h) ➡ Single step A1 x short ➡Continuous A long ➡ Adjusting the next hand B ➡ Adjusting the minute counter (position 9h) ➡Single step A1 x short ➡ Continuous A long
➌ Returning the crown to position 1. Termination of the chronograph hands adjustment (can be carried out at any time).
88 89
Movement Caliber 8171 / 204
PRESENTATION
INFO
Movement Caliber : 8171 / 204
Crown Positions:1. Normal position2. Quick correction of date3. Correction of hour, minute, day, date and second time zone / 24-hour
Display ElementsSecond HandMinute Hand30 Minute TotalizerHour HandChronogaph Hand 1/5 SecondMoon Phase IndicatorDate Window
Push Button AStart / Stop
Push Button BSplit / Reset
Battery: 395-SR 927W Service Life Battery : Without chrono = 57 months, with chrono 1H/D = 41 months 031213 1 IM - B
Control Buttons
1 2 3
90 91
2.11.1 2.21.2
Set SetReset Reset
SETTINGSMovement Caliber : 8171 / 204
Setting the Time
To Correct the DateCaution: Never correct date between 9pm and 0:30am.
92 93
SETTINGSMovement Caliber : 8171 / 204
To Correct the MoonphaseSet the date according to the last full moon. Afterwards adapt like steps 3.1 and 3.2.
3.1 3.2
94 95
FUNCTIONSMovement Caliber : 8171 / 204
After 2 hours of continuous running, the chrono stops and resets automatically to save the battery.
4.1
4.2 4.3
A
A
B
96 97
FUNCTIONSMovement Caliber : 8171 / 204
Measuring Split Times
5.1 5.2
Start Split
Restart
Stop Reset
5.3
5.4 5.5
A
B
B
A
B
98 99
CALIBRATIONMovement Caliber : 8171 / 204
After Battery Exchange or Mishandling OnlyTo reset chronograph, minute and second chronograph.
6.36.1 6.46.2
Enter Exit
Mintue Second
B B
A
B
100 101
PRESENTATIONMovement Caliber : 8172 / 220
Crown Positions:1. Normal position2. Quick correction of date3. Correction of hour, minute, day, date and second time zone / 24-hour
Display ElementsSecond HandMinute HandHour Hand30 Minute CounterChronograph Hand 1/5 SecondDay
Push Button AStart / Stop
Push Button BSplit / Reset
Control Buttons
1 2 3
Movement Caliber 8172 / 220
INFO Battery: 395-SR 57 Service Life Battery: Without chrono = 57 months, with chrono 1H/D = 41 month 0312141 IM - B
102 103
2.1 2.2
Set Reset
To Correct the Day
1.1 1.2
Set Reset
SETTINGSMovement Caliber : 8172 / 220
Setting the Time
104 105
3.1 3.2
SETTINGSMovement Caliber : 8172 / 220
Setting the Date
Caution: Never correct date between 9pm and 0:30am.
106 107
4.1
4.2 4.3
A
A
B
FUNCTIONSMovement Caliber : 8172 / 220
After 2 hours of continuous running, the chrono stops and resets automatically to save the battery.
108 109
Restart
Stop Reset
5.3
5.4 5.5
B
A
B
FUNCTIONSMovement Caliber : 8172 / 220
Measuring Split Times
5.1 5.2
Start Split
A
B
110 111
6.3 6.4
Exit
SecondA
B
CALIBRATIONMovement Caliber : 8172 / 220
After Battery Exchange or Mishandling OnlyTo reset chronograph, minute and second chronograph.
6.1 6.2
Enter
Mintue
B B
112 113
PRESENTATIONMovement Caliber : 9231 / 1890
Crown Positions:1. Normal position2. Setting of hour, minute, day, date
Display ElementsMinute HandHour HandDaySecond HandDate
Push Button A
Control Buttons
1 2
Movement Caliber 9231 / 1890
INFO Battery: 371 – SR920SW
114 115
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9231 / 1890
1.1
1.2 1.3
116 117
Setting the Date
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.
2.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9231 / 1890
2.1
2.2 2.3
118 119
Quick Correction of Date
3.1 Set the crown to position 1.
3.2 Press A step-by-step to advance the date until the desired date is set.
!! Attention !! The date advances at 00:00 midnight, not 12:00 noon.
SETTINGSMovement Caliber : 9231 / 1890
3.1 3.2
120 121
Setting the Day
4.1 Pull the crown to position 2.
4.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
4.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9231 / 1890
4.1
4.2 4.3
122 123
PRESENTATIONMovement Caliber : 9231 / 1900
Crown Positions:1. Normal position2. Correction of hour, minute, day, date, Sun and Moon
Display ElementsMinute HandHour HandDaySecond HandSun and MoonDate
Push Button A
Control Buttons
1 2
Movement Caliber 9231 / 1900
INFO Battery: 371 – SR920SW
124 125
Setting the Time, Sun and Moon
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands and Sun and Moon to the desired time.
1.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9231 / 1900
1.1
1.2 1.3
126 127
Setting the Date
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.
2.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9231 / 1900
2.1
2.2 2.3
128 129
Quick Correction of Date
3.1 Set the crown to position 1.
3.2 Press A step-by-step to advance the date until the desired date is set.
!! Attention !! The date advances at 00:00 midnight, not 12:00 noon.
SETTINGSMovement Caliber : 9231 / 1900
3.1 3.2
130 131
Setting the Day
4.1 Pull the crown to position 2.
4.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
4.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9231 / 1900
4.1
4.2 4.3
132 133
PRESENTATIONMovement Caliber : 9232 / 1920
Crown Positions:1. Normal position2. Quick correction of date3. Correction of hour, minute, day, date and second time zone / 24-hour
Push Button BQuick correction of secondtime zone / 24-hour
Control ButtonsPush Button AQuick correction of month
1 2 3
Movement Caliber 9232 / 1920
INFO Battery: 371 – SR920SW
Display ElementsMonthMinute HandHour HandDaySecond HandSecond time zone / 24 hourDate
134 135
Setting the Time and 24 Hour
1.1 Pull the crown to position 3.
1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9232 / 1920
1.1
1.2 1.3
136 137
Setting the Second Time Zone
2.1 Set the crown to position 1.
2.2 Press B step-by-step to advance the hand of the second time zone by one hour per step until the desired time is set.
2.3 Stoppressingthebuttonwhenfinishedsettingthetimezone.
SETTINGSMovement Caliber : 9232 / 1920
2.1
2.2 2.3
138 139
Setting the Date
3.1 Pull the crown to position 3.
3.2 Turn the crown clockwise. The date will advance 1 day when the time reaches 00:00 midnight. Continue to turn the crown until the desired date is set.
3.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9232 / 1920
3.1
3.2 3.3
140 141
Quick Correction of Date
4.1 Pull the crown out to position 2.
4.2 Turn the crown clockwise step-by-step to the desired date.
4.3 Push the crown back to position 1.
!! Attention !! Please Do Not set between 21:00 and 00:30.
SETTINGSMovement Caliber : 9232 / 1920
4.1
4.2 4.3
142 143
Setting the Day
5.1 Pull the crown to position 3.
5.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
5.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9232 / 1920
5.1
5.2 5.3
144 145
Quick Correction of Day
6.1 Set the crown to position 1.
6.2 Press A step-by-step to adjust the month to the desired one.
6.3 Release the button after completing the setting.
!! Attention !! Please Do Not use Quick Correction on 31st of each month.
SETTINGSMovement Caliber : 9232 / 1920
6.1
6.2 6.3
146 147
PRESENTATIONMovement Caliber : 9232 / 1930
Crown Positions:1. Normal position2. Quick correction of date3. Correction of hour, minute, day, date and second time zone / 24-hour
Push Button BQuick correction of secondtime zone / 24-hour
Control ButtonsPush Button AQuick correction of month
1 2 3
Movement Caliber 9232 / 1930
INFO Battery: 371 – SR920SW
Display ElementsMonthMinute HandHour HandSecond HandSecond time zone / 24 hourDate
148 149
Setting the Time and 24 Hour
1.1 Pull the crown to position 3.
1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9232 / 1930
1.1
1.2 1.3
150 151
Setting the Second Time Zone
2.1 Set the crown to position 1.
2.2 Press B step-by-step to advance the hand of the second time zone by one hour per step until the desired time is set.
2.3 Stoppressingthebuttonwhenfinishedsettingthetimezone.
SETTINGSMovement Caliber : 9232 / 1930
2.1
2.2 2.3
152 153
Setting the Date
3.1 Pull the crown to position 3.
3.2 Turn the crown clockwise. The date will advance 1 day when the time reaches 00:00 midnight. Continue to turn the crown until the desired date is set.
3.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9232 / 1930
3.1
3.2 3.3
154 155
Quick Correction of Date
4.1 Pull the crown out to position 2.
4.2 Turn the crown clockwise step-by-step to the desired date.
4.3 Push the crown back to position 1.
!! Attention !! Please Do Not set between 21:00 and 00:30.
SETTINGSMovement Caliber : 9232 / 1930
4.1
4.2 4.3
156 157
Setting the Day
5.1 Pull the crown to position 3.
5.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
5.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9232 / 1930
5.1
5.2 5.3
PRESENTATIONMovement Caliber : 9232 / 1950
Control ButtonsCrown Positions:1. Normal position2. Quick correction of date3. Setting of hour, minute, day, date
Display ElementsMinute HandHour HandDaySecond HandDate
1 2 3
159
160 161
1.1
1.2 1.3
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9232 / 1950
162 163
2.1
2.2 2.3
Setting the Date
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.
2.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9232 / 1950
164 165
Quick Correction of Date
3.1 Set the crown to position 2.
3.2 Turn the crown clockwise step-by-step to the desired date.
3.3 Push the crown back to position 1.
!! Attention !! Please Do Not set between 21:00 and 00:30.
SETTINGSMovement Caliber : 9232 / 1950
3.1
3.2 3.3
166 167
4.1
4.2 4.3
Setting the Day
4.1 Pull the crown to position 2.
4.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
4.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9232 / 1950
168 169
Movement Caliber 9238 / 1960
INFO Battery: 371 – SR920SW
PRESENTATIONMovement Caliber : 9238 / 1960
Display ElementsMinute HandHour HandSecond Hand24-Hour / Second Time ZoneDate
1 2
Crown Positions:1. Normal Running2. Setting of Hour, Minute, Date, 24-Hour
Push Button BQuick correction of secondtime zone / 24-hour
Control ButtonsPush Button AQuick correction of month
170 171
1.1
1.2 1.3
Setting the Time and 24 Hour
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9238 / 1960
172 173
2.1
2.2 2.3
Setting the Second Time Zone
2.1 Set the crown to position 1.
2.2 Press B step-by-step to advance the hour hand of the second time zone until the desired time is set.
2.3 Release the button once set.
!!Attention!!When using push button B to set the second time zone hour, the center minute hand must be set to between 55th minute and 05th minute at any hour.
SETTINGSMovement Caliber : 9238 / 1960
174 175
Quick Correction of Date
3.1 Pull the crown to position 2.
3.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.
3.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9238 / 1960
3.1
3.2 3.3
176 177
Quick Correction of Date
3.1 Set the crown to position 1.
3.2 Press A step-by-step to advance the date until the desired date is set.
!!Attention!!
The date advances at 00:00 midnight, not 12:00 noon.
SETTINGSMovement Caliber : 9238 / 1960
4.1 4.2
178 179
Movement Caliber 9238 / 1970
INFO Battery: 371 – SR920SW
PRESENTATIONMovement Caliber : 9238 / 1970
Display ElementsMinute HandHour HandDaySecond HandDate24-hour / second time zone
1 2
Crown Positions:1. Normal Running2. Setting of Hour, Minute, Date, 24-Hour
Push Button BQuick correction of 24-hour,second time zone
Control ButtonsPush Button C (Option)Quick correction of dayPush Button AQuick correction of date
180 181
1.1
1.2 1.3
Setting the Time and 24 Hour
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9238 / 1970
182 183
2.1
2.2 2.3
Setting the Second Time Zone
2.1 Set the crown to position 1.
2.2 Press B step-by-step to advance the hand of the second time zone by one hour per step until the desired time is set.
2.3 Release the button after completing the setting.
!! Attention !!When using push button B to set the second time zone hour, the center minute hand must be set to between 55th minute and 05th minute at any hour.
SETTINGSMovement Caliber : 9238 / 1970
184 185
3.1
3.2 3.3
Setting the Date
3.1 Pull the crown to position 2.
3.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.
3.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9238 / 1970
186 187
4.1
4.2 4.3
Quick Correction of Date
4.1 Set the crown to position 1.
4.2 Press A step-by-step to advance the date until the desired date set.
!! Attention !! The date advances at 00:00 midnight, not 12:00 noon.
SETTINGSMovement Caliber : 9238 / 1970
188 189
5.1
5.2 5.3
Setting the Day
5.1 Pull the crown to position 2.
5.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
5.3 Push the crown back to position 0.
SETTINGSMovement Caliber : 9238 / 1970
190 191
6.1
6.2 6.3
Quick Correction of Day
6.1 Set the crown to position 1.
6.2 Press A step-by-step to adjust the month to the desired one.
6.3 Press C twice to advance the day hand by one step until the desired day is set.
!! Attention !!Do not use Quick Correction to set the Day between 22:00 at night and 6:00 in the morning.
SETTINGSMovement Caliber : 9238 / 1970
192 193
Movement Caliber 9239 / 0005
INFO Battery: 371 – SR920SW Service Life Battery: 40 months 0312204 IM - A
PRESENTATIONMovement Caliber : 9239 / 0005
Display ElementsMinute HandHour HandDaySecond HandDateSun and Moon
1 2
Crown Positions:1. Normal position2. Correction of hour, minute, day, date, Sun and Moon
Push Button BQuick correction of 12h second time zone and day / night
Control ButtonsPush Button A
194 195
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9239 / 0005
1.1
1.2 1.3
196 197
2.1
2.2 2.3
Setting the Day
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
2.3 Push the crown back to position 1.
SETTINGSMovement Caliber : 9239 / 0005
198 199
3.1
3.2 3.3
Quick Correction of Date
3.1 Set the crown to position 1.
3.2 Press A step-by-step to advance the date until the desired date is set.
!! Attention !!
The date advances at 00:00 midnight, not 12:00 noon.
SETTINGSMovement Caliber : 9239 / 0005
200 201
4.1
4.2 4.3
Setting the Second Time Zone
4.1 Set the crown to position 1.
4.2 Press B step-by-step to advance the hand of the second time zone by one hour per step until the desired time is set.
4.3 Release the button after completing the setting.
SETTINGSMovement Caliber : 9239 / 0005
202 203
Movement Caliber ETA G15.261
PRESENTATIONMovement Caliber : ETA G15.261
Display Elements5 Minute CounterMinute Hand60 Minute CounterHour Hand30 Second CounterSecond HandDate Indicator
1 2 3
Crown Positions:1. Normal position2. Quick correction of date3. Correction of hour, minute, and date
Push Button BSplit / Reset
Control ButtonsPush Button AStart / Stop
204 205
Setting the Counters to Zero Setting crown in position 2 or 3
1.1 B. Set the hand of the 60 minute counter to zero
1.2 A. Set the hand of the 30 second counter to zero B. Set the hand of the 5 minute counter to zero
SETTINGSMovement Caliber : ETA G15.261
1.1B B
A
1.2
206 207
Crown 3 Positions
1. Normal running of watch
2. Rapid correction of the date
3. Position for setting the time with stop second and correction of the date at every passing or midnight.
Please note: Setting crown in position 3 : STOP-SECOND
SETTINGSMovement Caliber : ETA G15.261
2.1
208 209
Simple Timing Function Chronograph stops after 2 hours.
➊ to ➌ order of functions
➊ START
➋ STOP STOP: Read time - 5 minutes, 57 seconds
➌ Reset to zero
Movement Caliber : ETA G15.261
3.1
WARNINGBefore starting the time, put the chronograph hands back to their original position. If necessary, see paragraph "Setting The Timers To Zero".
➌
➊➋
FUNCTIONS
210 211
ADD Function Setting crown in position 1
➊ to order of functions➊ START➋ STOP Read➌ RESTART➍ STOP Read➎ RESTART➏ STOP Read • • •
Reset to zero
Movement Caliber : ETA G15.261
4.1
➊ ➋ ➌➍ ➎
➏
FUNCTIONS
212 213
SPLIT-TIME or INTERMEDIATE TIMES FunctionSetting crown in position 0
➊ to order of functions
➊ START➋ SPLIT 1: Read time 1 - 6 minutes, 4 seconds➌ RESTART (catching-up)➍ SPLIT 2: Read time 2 - 15 minutes, 36 seconds➎ RESTART (catching-up)
STOP: Read FINAL TIME - 25 minutes, 18 seconds
Reset to zero
Movement Caliber : ETA G15.261
5.3
5.1
B
A
B
B
5.4
5.2
➊
➋
➍
➌
➎
FUNCTIONS
214 215
28
Movement Caliber 8171 / 201
PRESENTATIONMovement Caliber : 8171 / 201
Display ElementsSecond HandMinute Hand30 Minute TotalizerHour HandChronogaphe Hand 1/5 SecondDate Window
1 2 3
Crown Positions:1. Normal position2. Quick correction of date3. Correction of hour, minute, day, date and second time zone / 24-hour
Push Button BSplit / Reset
Control ButtonsPush Button AStart / Stop
INFO Battery: 395-SR 927W Service Life Battery: Without chrono = 57 months, with chrono 1H/D = 41 months 031213 1 IM - B
216 217
SETTINGSMovement Caliber : 8171 / 201
28 128 3
1.1 2.11.2 2.2
Setting the TimeSetting the DateCaution: Never correct date between 9pm and 0:30am.
218 219
Measuring Cumulative Times
After 2 hours of continuous running, the chrono stop and resets automatically to save the battery.
SETTINGSMovement Caliber : 8171 / 201
28
28 28
3.3
A
A
B3.4 3.5
220 221
Movement Caliber : 8171 / 201
Measuring Split Times
FUNCTIONS
28 28
4.1 4.2
28
28 28
4.3
4.4 4.5
Restart
Stop Reset
B
A
B
Start Split
A
B
222 223
Movement Caliber : 8171 / 201
After Battery Exchange or Mishandling Only
To reset chronograph, minute and second chronograph
28
28
28
28
5.3
5.1B
A
B
B
Enter
Exit
Seconds
5.4
5.2
FUNCTIONS
224 225
Movement Caliber 9230 / 0005
Movement Caliber : 9230 / 0005
Display Elements24 HourMinute HandHour HandDaySecond Hand12 Hour Time ZoneDate
1 2 3
Control Buttons
Push Button BINFO Battery: 371-SR 920 SW Service Life Battery: 40 months
PRESENTATION
228 229
SETTINGSMovement Caliber : 9230 / 0005
3.1 4.13.2 4.2
Quick Date CorrectionCaution : Never correct date between 9pm and 0:30am.
Setting the Second Time Zone and Day and Night
230 231
Movement Caliber SW200
PRESENTATIONMovement Caliber : SW200
Display ElementsMinute HandHour HandSecond HandDayDate
1 2 3
Control ButtonsCrown Positions:1. Normal position2. Setting the date3. Setting of hour, minute, day
232 233
SETTINGSMovement Caliber : SW200
Setting the Time1.1 Pull out the crown to the second position.1.2 Turn the crown to set hour and minute hands. (Check that AM/PM is set correctly.)1.3 Push the crown back in to the position 1.
1.1
1.2 1.3
234 235
SETTINGSMovement Caliber : SW200
Setting the Day2.1 Pull out the crown to the position 2.2.2 Turn the crown to right for day setting.2.3 Push the crown back in to the position 1.
Please noteDo not set the calendar between 9:00P.M. and 4:00A.M. If the setting of the calendar is made during this period, the day will not change to the next day. Please set the calendar after changing the time other than the above period.
2.1
2.2 2.3
236 237
SETTINGSMovement Caliber : SW200
Setting the Date3.1 Pull out the crown to the position 2.3.2 Turn the crown to left for date setting.3.3 Push the crown back in to the position 1. 3.1
3.2 3.3
Please noteDo not set the calendar between 9:00P.M. and 4:00A.M. If the setting of the calendar is made during this period, the date will not change to the next date. Please set the calendar after changing the time other than the above period.
238 239
SETTINGSMovement Caliber : SW200
To Start the Watch4.1 Swing the watch side to side for 30 or more seconds.
240 241
Movement Caliber 638 / 101
PRESENTATIONMovement Caliber : 638 / 101
Display ElementsMinute HandHour HandSecond Hand
1 2
Control ButtonsCrown Positions:1. Normal position2. Setting the Time
242 243
SETTINGSMovement Caliber : 638 / 101
Setting the Time1.1 To set the time, gently pull out the crown to the first click stop positionand rotate to the time of day.1.2 After setting the time, push the crown back to its normal operating position. The watch will begin running again.
1.1 1.2