instruction manual - invicta watch...

Instruction Manual

2 3

PRESENTATIONMovement Caliber : 1069

Movement Caliber 1069

Display ElementsMinute HandHour HandSecond Hand

Control ButtonsCrown Positions:1. Normal position2. Setting of hour, minute

1 2

4 5

Setting the Time

1.1 Pull the crown to position 2.

1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.

1.3 Push the crown back to position 1.

SETTINGSMovement Caliber : 1069

1.1

1.2 1.3

6 7

Movement Caliber 2330 / 130 & 763

PRESENTATIONMovement Caliber : 2330 / 130 & 763

Display ElementsMinute HandHour HandSecond HandDate

Control ButtonsCrown Positions:1. Normal position2. Quick correction of date3. Setting of hour, minute, date

1 2 3

8 9

Setting the Time




SETTINGSMovement Caliber : 2330 / 130 & 763

1.1

1.2 1.3

10 11

Quick Correction of Date

3.1 Set the crown to position 2.

3.2 Turn the crown clockwise step-by-step to the desired date.


!! Attention !! Please Do Not set between 21:00 and 00:30.

SETTINGSMovement Caliber : 2330 / 130 & 763

2.1

2.2 2.3

12 13

Movement Caliber 3540.D

PRESENTATION

INFO

Movement Caliber : 3540.D

Crown Positions:1. Normal position2. Quick correction of date3. Correction of hour, minute, day, date and second time zone / 24-hour

Display ElementsMinute HandCenter Stop-Second1/10 Second Counter (Hour counter after 30 minutes)

Hour HandMinute CounterSecond HandDate

Push Button A

Push Button BBattery: 384 (diametaer 7.9mm x 3.6mm / SR 41 Accuracy: +20 / -10 seconds per monthSW)

Control Buttons

1 2 3

14 15

Setting the Time

➊ Pull out the crown to position 3 (the watch stops).*

➋ Turn the crown until you reach the correct time 8:45.

➌ Push the crown back into position 1.*

SETTINGSMovement Caliber : 3540.D

1.1 1.2Please note* In order to set the time to the exact second, ➊ must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set , ➌ must be pushed back into position 1 at the exact second.

➊ ➌

➋

16 17

Setting the Date (Quick Mode)

➊ Pull out the crown to position 2 (the watch continues to run).

➋ Turn the crown until the correct date 1 appears.

➌ Push the crown back into position 1.


Please note:The date can be changed during the date changing phase between 8:30 PM and 12:00 PM; please note that the date must be set to the date of the following day as in this case, the automatic date changing does not occur at midnight.

2.1 2.2

➊ ➌

➋

18 19

Setting the Date / TimeExample:– Date / time on the watch: 17 / 1:25 AM– Present date / time: 4 / 8:30 PM➊ Pull out the crown to position 2 (the watch continues to run).➋ Turn the crown until yesterday's date appears 3 .➌ Pull out the crown to position 3 (the watch stops).*➍ Turn the crown until the correct date 4 appears.➎ Continue to turn the crown until the correct time 8:30 PM appears.**➏ Push the crown back into position 1.


3.3

3.1

3.4

3.2

➊

➏

➍➎

➌

➋

Please note:* To set your watch to the exact second, please refer to chapter titled “Setting the Time”.** Please observe the AM / PM clock rhythm.

20 21

FUNCTIONSMovement Caliber : 3540.D

4.1 4.2

A ➊ ➋

B ➌

Chronograph: Basic Function (Start / Stop / Reset)

Example:

➊ Start: Press push button A.

➋ Stop: To stop the timing, press push button A once more and read the 3 chronograph counters: 4 min / 38 sek / 7/10 sec

➌ Zero positioning: Press push button B. (The 3 chronograph hands will be reset to their zero position).

22 23


5.1 5.2

A➊➋➌➍

B ➎

Chronograph: Accumulated TimingExample:➊ Start: (start timing)

➋ Stop: (e.g. 15 min 5 sec following ➊ )

➌ Restart: (timing is resumed)

➍ Stop: (e.g. 13 min 5 sec following ➌ ) = 28 min 10 sec (The accumulated measured time is shown)*➎ Reset: The 3 chronograph hands are returned to their zero position.

Please note:* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)

24 25


6.1 6.2

A➊➍

B➋➌

B ➎

Chronograph: Intermediate or Interval TimingExample:➊ Start: (start timing)

➋ Display interval: e.g. 10 minutes 10 seconds (timing continues in the background)

➌ Making up the measured time: (the 3 chronograph hands are quickly advanced to the ongoing measured time).➍ Stop: (Final time is displayed)

➎ Reset: The 3 chronograph hands are returned to their zero position.


26 27

7.1

7.2 7.3

CALIBRATIONMovement Caliber : 3540.D

Adjusting the Chronograph Hands to Zero PositionExample:One or several chronograph hands are not in their correct zero position and have to be adjusted (e.g. following a battery change).➊ Pull out the crown to position 3 (all 3 chronograph hands are in their correct or incorrect zero position).➋ Keep push-buttons A and B depressed simultaneously for at least 2 seconds (the center stop-second rotates by 360° ➡ corrective mode is activated).Adjusting the center stop second ➡ Single step A1 x short ➡ Continuous A long ➡ Adjusting the next hand B ➡ Adjusting the 1/10 second counter hand (position 6h) ➡ Single step A1 x short ➡Continuous A long ➡ Adjusting the next hand B ➡ Adjusting the minute counter (position 9h) ➡Single step A1 x short ➡ Continuous A long

➌ Returning the crown to position 1. Termination of the chronograph hands adjustment can be carried out at any time.

➊

➌

A ➋

B ➋

28 29

Movement Caliber 5040.D

INFO Battery: 395 (diameter 9.5mm x 2.6mm / SR 927 SW) Accuracy: +20 / -10 seconds per month

PRESENTATIONMovement Caliber : 5040.D


Display ElementsMinute HandCenter Stop-SecondSecond HandHour HandMinute Counter1/10 Second Counter(Hour counter after 30 minutes)

Date Window

Push Button AQuick correction of month

Push Button BQuick correction of secondtime zone / 24-hour

Control Buttons

1 2 3

30 31

Setting the Time





Please note* In order to set the time to the exact second, ➊ must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set, ➌ must be pushed back into position 1 at the exact second.

1.1 1.2

➊ ➌

➋

32 33

2.1 2.2

➊ ➌

➋



➋ Turn the crown until the correct date 1 appears.



Please note:The date can be changed during the date changing phase between 8:30 PM and 12:00 PM; please note that the date must be set to the date of the following day as in this case, the automatic date changing does not occur at midnight.

34 353.3

3.1

3.4

3.2

➊

➏

➍➎

➌

➋

Setting the Date / TimeExample:– Date / time on the watch: 17 / 1:25 AM– Present date / time: 4 / 8:30 PM➊ Pull out the crown to position 2 (the watch continues to run).➋ Turn the crown until yesterdays date appears 3 .➌ Pull out the crown to position 3 (the watch stops).*➍ Turn the crown until the correct date 4 appears.➎ Continue to turn the crown until the correct time 8:30 PM appears.**➏ Push the crown back into position 1.


Please note:* To set your watch to the exact second, please refer to chapter titled “Setting the Time”.** Please observe the AM / PM clock rhythm.

36 37

4.1 4.2

A ➊ ➋

B ➌



Example:


➋ Stop: to stop the timing, press push button A once more and read the 3 chronograph counters: 4 min / 38 sek / 7/10 sec


38 39

5.1 5.2

A➊➋➌➍

B ➎







40 41

6.1 6.2

A➊➍

B➋➌

B ➎







42 43

7.1

7.2 7.3

CALIBRATIONMovement Caliber : 5040.D


➌ Returning the crown to position 1. Termination of the chronograph hands adjustment can be carried out at any time.

➊

➌

A ➋

B ➋

44 45




Control ButtonsCrown Positions:1. Normal position2. Setting of hour, minute

1 2

46 47

Setting the Time





1.1

1.2 1.3

48 49

Movement Caliber 7004.P

PRESENTATIONMovement Caliber : 7004.P

Display ElementsDateMinute HandDayHour HandSecond Hand Control Buttons

Crown Positions:1. Normal position2. Setting of hour, minute, day

INFO Battery: 381 (diameter 11.6mm x 2.15mm)

1 2 3

50 51

Setting the Time


1.2 Turn the crown to set the hour / minute hands to the desired time.


SETTINGSMovement Caliber : 7004.P

1.1

1.2 1.3

52 53



2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.



2.1

2.2 2.3

Please note:An extreme acceleration in setting the date with quick mode can create a false date indication. The synchronization is re-established by setting the date from 01 till 31 (crown position 2).

54 55

Setting the Day (Quick Mode)


3.2 Turn the crown clockwise to advance the day hand until the desired day is set.



3.1

3.2 3.3

Please note:70% of power is saved when the crown is pulled out.

56 57



Display Elements30 Minute CounterMinute HandHour HandSecond Hand60 Second HandDayDate

Control ButtonsCrown Positions:1. Normal position2. Setting of hour, minute, day

1 2 3

58 59

Crown 3 Positions

Rapid date and day correction is not possible between 8 p.m. and 2 a.m.

1. Normal running of watch and hand-winding

2. Rapid correction of the date Rapid correction of the day

3. Position for setting the time with stop second and correction of the date at every passing of midnight


1.1

Please note:The movement of the wrist winds the watch.

A

B

60 61

FUNCTIONSMovement Caliber : 7750

Simple Timing FunctionSetting crown in position 1

➊ to ➌ order of functions➊ START➋ STOP : Read time - 2 hours, 10 minutes, 8 seconds ➌ Reset to zero

2.1

➊➋

➌

62 63


ADD FunctionSetting crown in position 1➊ to order of functions➊ START➋ STOP Read➌ RESTART➍ STOP Read➎ RESTART➏ STOP Read ••• Reset to zero

3.1

➊➋

➌➍

➎➏ ••••••

64 65



Display ElementsMinute HandMonth Indicator30 Minute CounterDay IndicatorHand HourSecond Hand24 Hour Hand60 Second HandMoon Phase Indicator12 Hour CounterDate Hand

Crown Positions:1. Normal position2. Correction of hour, minute, day, date and second time zone / 24-hour

Push Button BSplit / Reset

Control ButtonsPush Button C (Option)Quick correction of day

Push Button AQuick correction of date.

1 2 3

66 67

Crown 3 PositionsDate correction is not recommended between 10 p.m. and 2 p.m. The moon phase cannot be corrected between 3 a.m. and 4 a.m. 1. Normal running of watch and hand-winding2. Rapid correction of the date Rapid correction of the moon phase3. Position for setting the time with stop second and correction of the date at every passing of midnight


1.1

Please note:The movement of the wrist winds the watch.

A

B

68 69


Simple Timing FunctionSetting crown in position 1

➊ to ➌ order of functions➊ START➋ STOP : Read time - 4 hours, 10 minutes, 8 seconds ➌ Reset to zero

2.1

➊➋

➌

70 71


ADD FunctionSetting crown in position 1➊ to order of functions➊ START➋ STOP Read➌ RESTART➍ STOP Read➎ RESTART➏ STOP Read ••• Reset to zero

3.1

➊➋

➌➍

➎➏ ••••••

72 73

Movement Caliber 8040.N

INFO

Movement Caliber : 8040.N


Display ElementsMinute HandDayHour HandMinute CounterCenter Stop-SecondSecond Hand1/10 Second Counter (Hour counter after 30 minutes)

Date

Push Button A

Push Button BBattery: 384 (diametaer 7.9mm x 3.6mm / SR 41 Accuracy: +20 / -10 seconds per monthSW)

Control Buttons

1 2 3

74 75

Setting the Time




SETTINGSMovement Caliber : 8040.N

1.1 1.2Please note* In order to set the time to the exact second, ➊ must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set , ➌ must be pushed back into position 1 at the exact second.

➊ ➌

➋

76 77



➋ Turn the crown counter clockwise until the correct date 1 appears.


Movement Caliber : 8040.N

Please note:During the date changing phase between 9 PM and 12 PM; the date must be set to the date of the following day. An extreme acceleration in setting the date with quick mode can create a false date indication. The synchronization is re-established by setting the date from 01 till 31 (crown in position 2).

2.1 2.2

➊ ➌

➋

SETTINGS

Setting the Date / Weekday and TimeExample:– Date / time on the watch: 17 / 1:25 AM / MON– Present date / time: 23 / 20:30 PM / SAT➊ Pull out the crown to position 3 (the watch stops).➋ Turn the crown until yesterday’s weekday FRI appear.➌ Pull out the crown to position 3.➍ Turn the crown backwards until yesterday’s date appears 22 .➎ Pull out the crown to position 3 (the watch stops).*➏ Turn the crown until the correct date 23 and weekday SAT appears.➐ Continue to turn the crown until the correct time 8:35 PM appears.**➑ Push the crown back into position 1.

SETTINGSMovement Caliber : 8040.N

Please note:* To set your watch to the exact second, please refer to chapter titled “Setting The Time”.** Please observe the AM / PM clock rhythm.

78

3.3

3.1

3.4

3.2

➊

➏

➍➎

➌

➋

79

80 81

4.1 4.2

A ➊ ➋

B ➌

FUNCTIONSMovement Caliber : 8040.N


Example:


➋ Stop: To stop the timing, press push button A once more and read the 3 chronograph counters: 4 min / 38 sek / 7/10 sec


82 83

5.1 5.2

A➊➋➌➍

B ➎







84 85

6.1 6.2

A➊➍

B➋➌

B ➎







86 87

7.1

7.2 7.3

➊

➌

A ➋

B ➋

CALIBRATIONMovement Caliber : 8040.N


➌ Returning the crown to position 1. Termination of the chronograph hands adjustment (can be carried out at any time).

88 89

Movement Caliber 8171 / 204

PRESENTATION

INFO

Movement Caliber : 8171 / 204


Display ElementsSecond HandMinute Hand30 Minute TotalizerHour HandChronogaph Hand 1/5 SecondMoon Phase IndicatorDate Window

Push Button AStart / Stop


Battery: 395-SR 927W Service Life Battery : Without chrono = 57 months, with chrono 1H/D = 41 months 031213 1 IM - B

Control Buttons

1 2 3

90 91

2.11.1 2.21.2

Set SetReset Reset

SETTINGSMovement Caliber : 8171 / 204

Setting the Time

To Correct the DateCaution: Never correct date between 9pm and 0:30am.

92 93


To Correct the MoonphaseSet the date according to the last full moon. Afterwards adapt like steps 3.1 and 3.2.

3.1 3.2

94 95

FUNCTIONSMovement Caliber : 8171 / 204

After 2 hours of continuous running, the chrono stops and resets automatically to save the battery.

4.1

4.2 4.3

A

A

B

96 97


Measuring Split Times

5.1 5.2

Start Split

Restart

Stop Reset

5.3

5.4 5.5

A

B

B

A

B

98 99

CALIBRATIONMovement Caliber : 8171 / 204

After Battery Exchange or Mishandling OnlyTo reset chronograph, minute and second chronograph.

6.36.1 6.46.2

Enter Exit

Mintue Second

B B

A

B

100 101

PRESENTATIONMovement Caliber : 8172 / 220


Display ElementsSecond HandMinute HandHour Hand30 Minute CounterChronograph Hand 1/5 SecondDay

Push Button AStart / Stop


Control Buttons

1 2 3


INFO Battery: 395-SR 57 Service Life Battery: Without chrono = 57 months, with chrono 1H/D = 41 month 0312141 IM - B

102 103

2.1 2.2

Set Reset

To Correct the Day

1.1 1.2

Set Reset


Setting the Time

104 105

3.1 3.2


Setting the Date

Caution: Never correct date between 9pm and 0:30am.

106 107

4.1

4.2 4.3

A

A

B


After 2 hours of continuous running, the chrono stops and resets automatically to save the battery.

108 109

Restart

Stop Reset

5.3

5.4 5.5

B

A

B



5.1 5.2

Start Split

A

B

110 111

6.3 6.4

Exit

SecondA

B

CALIBRATIONMovement Caliber : 8172 / 220

After Battery Exchange or Mishandling OnlyTo reset chronograph, minute and second chronograph.

6.1 6.2

Enter

Mintue

B B

112 113


Crown Positions:1. Normal position2. Setting of hour, minute, day, date

Display ElementsMinute HandHour HandDaySecond HandDate

Push Button A

Control Buttons

1 2


INFO Battery: 371 – SR920SW

114 115

Setting the Time





1.1

1.2 1.3

116 117

Setting the Date





2.1

2.2 2.3

118 119



3.2 Press A step-by-step to advance the date until the desired date is set.

!! Attention !! The date advances at 00:00 midnight, not 12:00 noon.


3.1 3.2

120 121

Setting the Day


4.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.



4.1

4.2 4.3

122 123


Crown Positions:1. Normal position2. Correction of hour, minute, day, date, Sun and Moon

Display ElementsMinute HandHour HandDaySecond HandSun and MoonDate

Push Button A

Control Buttons

1 2



124 125

Setting the Time, Sun and Moon


1.2 Turn the crown clockwise to set the hour / minute hands and Sun and Moon to the desired time.



1.1

1.2 1.3

126 127

Setting the Date





2.1

2.2 2.3

128 129






3.1 3.2

130 131

Setting the Day





4.1

4.2 4.3

132 133




Control ButtonsPush Button AQuick correction of month

1 2 3



Display ElementsMonthMinute HandHour HandDaySecond HandSecond time zone / 24 hourDate

134 135

Setting the Time and 24 Hour


1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time.



1.1

1.2 1.3

136 137

Setting the Second Time Zone


2.2 Press B step-by-step to advance the hand of the second time zone by one hour per step until the desired time is set.

2.3 Stoppressingthebuttonwhenfinishedsettingthetimezone.


2.1

2.2 2.3

138 139

Setting the Date


3.2 Turn the crown clockwise. The date will advance 1 day when the time reaches 00:00 midnight. Continue to turn the crown until the desired date is set.



3.1

3.2 3.3

140 141


4.1 Pull the crown out to position 2.





4.1

4.2 4.3

142 143

Setting the Day





5.1

5.2 5.3

144 145

Quick Correction of Day


6.2 Press A step-by-step to adjust the month to the desired one.

6.3 Release the button after completing the setting.

!! Attention !! Please Do Not use Quick Correction on 31st of each month.


6.1

6.2 6.3

146 147





1 2 3



Display ElementsMonthMinute HandHour HandSecond HandSecond time zone / 24 hourDate

148 149






1.1

1.2 1.3

150 151




2.3 Stoppressingthebuttonwhenfinishedsettingthetimezone.


2.1

2.2 2.3

152 153

Setting the Date


3.2 Turn the crown clockwise. The date will advance 1 day when the time reaches 00:00 midnight. Continue to turn the crown until the desired date is set.



3.1

3.2 3.3

154 155


4.1 Pull the crown out to position 2.





4.1

4.2 4.3

156 157

Setting the Day





5.1

5.2 5.3


INFO Battery: 371 – SR920SW158


Control ButtonsCrown Positions:1. Normal position2. Quick correction of date3. Setting of hour, minute, day, date

Display ElementsMinute HandHour HandDaySecond HandDate

1 2 3

159

160 161

1.1

1.2 1.3

Setting the Time





162 163

2.1

2.2 2.3

Setting the Date





164 165







3.1

3.2 3.3

166 167

4.1

4.2 4.3

Setting the Day





168 169




Display ElementsMinute HandHour HandSecond Hand24-Hour / Second Time ZoneDate

1 2

Crown Positions:1. Normal Running2. Setting of Hour, Minute, Date, 24-Hour



170 171

1.1

1.2 1.3






172 173

2.1

2.2 2.3



2.2 Press B step-by-step to advance the hour hand of the second time zone until the desired time is set.

2.3 Release the button once set.

!!Attention!!When using push button B to set the second time zone hour, the center minute hand must be set to between 55th minute and 05th minute at any hour.


174 175






3.1

3.2 3.3

176 177




!!Attention!!

The date advances at 00:00 midnight, not 12:00 noon.


4.1 4.2

178 179




Display ElementsMinute HandHour HandDaySecond HandDate24-hour / second time zone

1 2

Crown Positions:1. Normal Running2. Setting of Hour, Minute, Date, 24-Hour

Push Button BQuick correction of 24-hour,second time zone

Control ButtonsPush Button C (Option)Quick correction of dayPush Button AQuick correction of date

180 181

1.1

1.2 1.3






182 183

2.1

2.2 2.3





!! Attention !!When using push button B to set the second time zone hour, the center minute hand must be set to between 55th minute and 05th minute at any hour.


184 185

3.1

3.2 3.3

Setting the Date





186 187

4.1

4.2 4.3



4.2 Press A step-by-step to advance the date until the desired date set.



188 189

5.1

5.2 5.3

Setting the Day





190 191

6.1

6.2 6.3

Quick Correction of Day


6.2 Press A step-by-step to adjust the month to the desired one.

6.3 Press C twice to advance the day hand by one step until the desired day is set.

!! Attention !!Do not use Quick Correction to set the Day between 22:00 at night and 6:00 in the morning.


192 193


INFO Battery: 371 – SR920SW Service Life Battery: 40 months 0312204 IM - A


Display ElementsMinute HandHour HandDaySecond HandDateSun and Moon

1 2

Crown Positions:1. Normal position2. Correction of hour, minute, day, date, Sun and Moon

Push Button BQuick correction of 12h second time zone and day / night

Control ButtonsPush Button A

194 195

Setting the Time





1.1

1.2 1.3

196 197

2.1

2.2 2.3

Setting the Day





198 199

3.1

3.2 3.3




!! Attention !!

The date advances at 00:00 midnight, not 12:00 noon.


200 201

4.1

4.2 4.3






202 203

Movement Caliber ETA G15.261

PRESENTATIONMovement Caliber : ETA G15.261

Display Elements5 Minute CounterMinute Hand60 Minute CounterHour Hand30 Second CounterSecond HandDate Indicator

1 2 3

Crown Positions:1. Normal position2. Quick correction of date3. Correction of hour, minute, and date


Control ButtonsPush Button AStart / Stop

204 205

Setting the Counters to Zero Setting crown in position 2 or 3

1.1 B. Set the hand of the 60 minute counter to zero

1.2 A. Set the hand of the 30 second counter to zero B. Set the hand of the 5 minute counter to zero

SETTINGSMovement Caliber : ETA G15.261

1.1B B

A

1.2

206 207

Crown 3 Positions

1. Normal running of watch

2. Rapid correction of the date

3. Position for setting the time with stop second and correction of the date at every passing or midnight.

Please note: Setting crown in position 3 : STOP-SECOND

SETTINGSMovement Caliber : ETA G15.261

2.1

208 209

Simple Timing Function Chronograph stops after 2 hours.

➊ to ➌ order of functions

➊ START

➋ STOP STOP: Read time - 5 minutes, 57 seconds

➌ Reset to zero

Movement Caliber : ETA G15.261

3.1

WARNINGBefore starting the time, put the chronograph hands back to their original position. If necessary, see paragraph "Setting The Timers To Zero".

➌

➊➋

FUNCTIONS

210 211

ADD Function Setting crown in position 1

➊ to order of functions➊ START➋ STOP Read➌ RESTART➍ STOP Read➎ RESTART➏ STOP Read • • •

Reset to zero


4.1

➊ ➋ ➌➍ ➎

➏

FUNCTIONS

212 213

SPLIT-TIME or INTERMEDIATE TIMES FunctionSetting crown in position 0

➊ to order of functions

➊ START➋ SPLIT 1: Read time 1 - 6 minutes, 4 seconds➌ RESTART (catching-up)➍ SPLIT 2: Read time 2 - 15 minutes, 36 seconds➎ RESTART (catching-up)

STOP: Read FINAL TIME - 25 minutes, 18 seconds

Reset to zero


5.3

5.1

B

A

B

B

5.4

5.2

➊

➋

➍

➌

➎

FUNCTIONS

214 215

28



Display ElementsSecond HandMinute Hand30 Minute TotalizerHour HandChronogaphe Hand 1/5 SecondDate Window

1 2 3



Control ButtonsPush Button AStart / Stop

INFO Battery: 395-SR 927W Service Life Battery: Without chrono = 57 months, with chrono 1H/D = 41 months 031213 1 IM - B

216 217


28 128 3

1.1 2.11.2 2.2

Setting the TimeSetting the DateCaution: Never correct date between 9pm and 0:30am.

218 219

Measuring Cumulative Times

After 2 hours of continuous running, the chrono stop and resets automatically to save the battery.


28

28 28

3.3

A

A

B3.4 3.5

220 221



FUNCTIONS

28 28

4.1 4.2

28

28 28

4.3

4.4 4.5

Restart

Stop Reset

B

A

B

Start Split

A

B

222 223


After Battery Exchange or Mishandling Only

To reset chronograph, minute and second chronograph

28

28

28

28

5.3

5.1B

A

B

B

Enter

Exit

Seconds

5.4

5.2

FUNCTIONS

224 225



Display Elements24 HourMinute HandHour HandDaySecond Hand12 Hour Time ZoneDate

1 2 3

Control Buttons

Push Button BINFO Battery: 371-SR 920 SW Service Life Battery: 40 months

PRESENTATION

226 227


1.1 2.11.2 2.2

Setting the Time Setting the Day

SETTINGS

228 229


3.1 4.13.2 4.2

Quick Date CorrectionCaution : Never correct date between 9pm and 0:30am.

Setting the Second Time Zone and Day and Night

230 231

Movement Caliber SW200

PRESENTATIONMovement Caliber : SW200

Display ElementsMinute HandHour HandSecond HandDayDate

1 2 3

Control ButtonsCrown Positions:1. Normal position2. Setting the date3. Setting of hour, minute, day

232 233

SETTINGSMovement Caliber : SW200

Setting the Time1.1 Pull out the crown to the second position.1.2 Turn the crown to set hour and minute hands. (Check that AM/PM is set correctly.)1.3 Push the crown back in to the position 1.

1.1

1.2 1.3

234 235


Setting the Day2.1 Pull out the crown to the position 2.2.2 Turn the crown to right for day setting.2.3 Push the crown back in to the position 1.

Please noteDo not set the calendar between 9:00P.M. and 4:00A.M. If the setting of the calendar is made during this period, the day will not change to the next day. Please set the calendar after changing the time other than the above period.

2.1

2.2 2.3

236 237


Setting the Date3.1 Pull out the crown to the position 2.3.2 Turn the crown to left for date setting.3.3 Push the crown back in to the position 1. 3.1

3.2 3.3

Please noteDo not set the calendar between 9:00P.M. and 4:00A.M. If the setting of the calendar is made during this period, the date will not change to the next date. Please set the calendar after changing the time other than the above period.

238 239


To Start the Watch4.1 Swing the watch side to side for 30 or more seconds.

240 241




1 2

Control ButtonsCrown Positions:1. Normal position2. Setting the Time

242 243


Setting the Time1.1 To set the time, gently pull out the crown to the first click stop positionand rotate to the time of day.1.2 After setting the time, push the crown back to its normal operating position. The watch will begin running again.

1.1 1.2

instruction manual - invicta watch...

Documents