Download - epo4030-tdsi-gb
-
8/3/2019 epo4030-tdsi-gb
1/2
EPO 4030
EPOXY CASTING SYSTEMTEMPERATURE RESISTANCE: 120C
Page 1/2 21 October 2005
APPLICATIONS
Thermoforming moulds, polyurethane foam and RIM injection moulds.
PROPERTIES
Low viscosity Good heat exchange) Heat treatment by self-curing whole being used
Fillers can be added (aluminium) Low shrinkage
PHYSICAL PROPERTIES
RESIN HARDENER MIXING
Mixing ratio by weight 100 10
Aspect thick liquid liquid liquid
Colour grey red grey
Viscosity at 25C (mPa.s) Brookfield LVT 70,000 120 18,500
Specific gravity at 25C (g/cm3)
Specific gravity of cured product at 23CISO 1675 : 1985ISO 2781 : 1996
1.75-
0.96-
-1.69
Pot life at 25C on 500 g (min.) TECAM 140 - 180
MECHANICAL PROPERTIES AT 23C (1)
Hardness ISO 868 : 2003 Shore D1 / D15 85 / 84
Hardness at 80C ISO 868 : 2003 Shore D1 / D15 85 / 84
Tensile strength ISO 527 : 1993 MPa 30
Flexural modulus ISO 178 : 2001 MPa 4.600
Flexural strength ISO 178 : 2001 MPa 50
Compressive strength at yield ISO 604 : 2002 MPa 90
Impact strength (CHARPY)
Unnotched specimens
ISO 179/1 eU : 1994 kJ/m2
11
(1) The above properties, obtained using standard specimens and in precise cross-linking conditions, represent the optimumvalues for this system (curing at 100C).
HANDLING PRECAUTIONS
Normal health and safety precautions should be observed when handling these products : ensure good ventilation wear gloves and safety glasses and clothes.
For further information, please consult the product safety data sheet
XSON France AXSON GmbH AXSON IBERICA AXSON Central Europe AXSON SHANGHAI AXSON JAPAN AXSON INDIA
P 40444 Dietzenbach Barcelona Zlate Moravce Shanghai Okazaki city Pune5005 Cergy Cedex Tl. (++49) 60 74 407110 Tel. (++34) 93 225 16 20 Tel. (++421) 376422526 Tel. (++86-21) 58683037 Tel.(++81) 564 262591 [email protected]
l. (++33) 1 34 40 34 60 AXSON ITALIA AXSON UK AXSON MEXICO AXSON NA USA AXSON MIDDLE EAST AXSON KOREAax (+33) 1 34 21 97 87 Saronno Newmarket Mexico DF Eaton Rapids [email protected] Seoulmail : [email protected] Tel. (++39) 02 96 70 23 36 Tel. (++44) 1638 660 062 Tel. (++52) 5552644922 Tel. (++1) 517 6638191 [email protected]
-
8/3/2019 epo4030-tdsi-gb
2/2
EPO 4030
EPOXY CASTING SYSTEMTEMPERATURE RESISTANCE: 120C
Page 2/2 21 October 2005
PROCESSING CONDITIONS
Thoroughly mix the resin before use and degas under vacuum. Mix the system according to 100/10 mixing ratio untilaspect becomes homogeneous. EPO 4030 is colour coded to ensure complete mixing of the components. Cast anddemould after polymerisation (24 36 hours minimum) the mould can be used between 24 and 36 hours aftercasting.
Optimum properties will be obtained by self-curing during thermoforming cycles. For casting thickness above 40mm it is advised to fill the system with different aluminium granular fillers (RZ 1019 and RZ 1021) as follows :
Resin Hardener RZ 1019 RZ 1021
100 10 55 55
THERMAL AND SPECIFIC PROPERTIES (1)
Glass transition temperature (Tg) ISO 11359 : 2002 C 120
Coefficient of thermal expansion (CTE)(+10 to +110C)
ISO 11359 : 1999 10-6
K-1
55
Heat deflection temperature (HDT) - C 100
Linear shrinkage (250 x 50 x 40 mm) - % 0.08
Maximal casting thickness mm 40
Hardening time before demoulding at 25C - hr 24Complete hardening time at 23C - day 5
STORAGE CONDITIONS
Use before 18 months according to the manufacturing date. Expiration date indicated on the packaging.Any open can must be tightly closed under dry inert gas (dry air, nitrogen, etc.).
PACKAGING
RSIN HARDENER6 x 1.00 kg
1 x 10.00 kg6 x 0.100 kg1 x 1.000 kg
GUARANTEE
The information contained in this technical data sheet result from research and tests conducted in our Laboratories under precise conditions.It is the responsibility of the user to determine the suitability of AXSON products, under their own conditions before commencing with theproposed application. AXSON guarantee the conformity of their products with their specifications but cannot guarantee the compatibility of aproduct with any particular application. AXSON disclaim all responsibility for damage from any incident which results from the use of theseproducts. The responsibility of AXSON is strictly limited to reimbursement or replacement of products which do not comply with the publishedspecifications.