www.intertec.info
Doors – Latching Systems
SD512-5en Doors – Latching Systems page 1/5
1. For cabinets (un-manned)
Locking systems BASIC CLASSIC
Type 1: (1) Classic cabinet locking system • stainless steel• 5 mm slotted key or
7 mm square key• optional with
Square/tringular key
● ○
Type 2: • swivel handle• black polyamide• equipped w. half profile cylinder
(40 mm length) according to DIN 18252
● ●
Type 3: • swivel handle• stainless steel• equipped w. half profile cylinder
(40 mm length) according to DIN 18252
○ ○
Type 4: (1) • lever handle (Canada)• door latching system non
lockable• optional with padlock
○ ○
Type 5: (1) • lever handle (Canada)• stainless steel• door latching system non
lockable • optional with padlock
○ ○
Type 6: Used if two different key types are needed • swivel handle• for 2 half profile cylinder (HPC)• for 40/45 mm HPC
○ ○
● = standard ○ = optional ─ = not available(1) also for frame window
www.intertec.info
Doors – Latching Systems
SD512-5en Doors – Latching Systems page 2/5
For cabinets (un-manned)
Locking systems (continued) BASIC CLASSIC
Type 7: • swivel handle• for 45 mm half profile cylinder• best solution for a large number
of in-house locking systems ○ ○
● = standard ○ = optional ─ = not available
Latching systems
Three-point latching system Double door latching system Multi-point latching system • For EEx p• Only in combination with
locking system Type 2
www.intertec.info
Doors – Latching Systems
SD512-5en Doors – Latching Systems page 3/5
2. For walk-in houses and cabinets
Note: Self-closing and lockable doors have to be used when accessing closed electrical service locations. Access doors must: - swing outwards (in escape direction)- can be opened from inside without a key at any time
Note 1: The requirements are not applicable, if the door is permanently opened during service andmaintenance and the cabinet cannot be manned.
- a security lock is used(according to DIN VDE 0100-731:2014-10, 731.729)
INTERTEC locking systems meet the requirements according to DIN EN 1125.
Equipped with…
• three-point latching system• safety profile cylinder• door handle outside• panic bar inside (equipped with double doors one panic bar for each door)• threshold protection inside
CLASSIC ARCTIC Handle • Non-metallic w. 2 rosettes
• 60 mm half profile cylinder• Non-metallic• 40 mm half profile cylinder
• Stainless steel (SS316)• 40 mm half profile cylinder
Panic bar • Galvanized steel • Galvanized steel • Stainless steel (SS316)
Threshold protection
• Stainless steel (SS316)
www.intertec.info
Doors – Latching Systems
SD512-5en Doors – Latching Systems page 4/5
For walk-in houses and cabinets
CLASSIC ARCTIC
Handle
Non-metallic ● ─
Galvanized steel ○ ●
Stainless steel (SS316) ○ ○
Panic bar Galvanized steel ● ●
Stainless steel (SS316) ○ ○ Threshold protection (inside) Stainless steel (SS316) ● ●
● = standard ○ = optional ─ = not available
3. For HOT BOX
Locking system
• lever handle and catch in stainless steel(1.4308)
• for single and double door design• for HOT BOX only!
www.intertec.info
Doors – Latching Systems
SD512-5en Doors – Latching Systems page 5/5
4. For MINICAB 44 and frame window
Locking systems
Type 1M • slotted key
●
Type 2M • hex handle
○
Type 3M • lever handle• door latching system non lockable ○
Type 4M • lever handle• lockable ○
Type 5M • lever handle• lockable with optional padlock ○
Type 6M • T-handle• door latching system non lockable ○
Type 7M • T-handle• lockable ○
Type 8M • compact handle• lockable with optional half profile
cylinder (HPC) ○
● = standard ○ = optional ─ = not available