product line: sliding doors, swing door drives, … · automatic entrance systems product line:...
TRANSCRIPT
AUTOMATIC ENTRANCE SYSTEMS
Product line: sliding doors, swing door drives,
revolving doors, glass sliding doors
2
Product line for modern architecture
Automatic entrance systems
2
3
Glass sliding doors
With manual or automatically
driven all-glass systems, you
achieve both transparency and
separation.
Revolving doors /
Single-person access
Presentable, draught-free
entrance areas are made with
revolving doors, depending on
the system. Security revolving
doors and security curved
sliding doors are used in areas
where a high degree of security
is required.
Swing door drives
Our swing door drives auto-
mate exterior, interior, smoke,
and fi re doors. Barrier-free
access can thus be provided
anywhere.
Sliding doors
Automatic sliding doors are
used most frequently in auto-
mation of building entrances.
People entering the building
appreciate the fast opening
and enabling of the entrance
area and consider it convenient
when they enter the building.
State-of-the-art technology – user-friendly, high-performance and safe.
Table of contents
Sliding doors ....................................................................page 04
Swing door drives ............................................................page 20
Revolving doors ............................................................. page 24
Single-person access .....................................................page 30
Glass sliding doors ..........................................................page 34
GU service ........................................................................page 38
Gretsch-Unitas Group
With its future-oriented
innovations, the Gretsch-
Unitas Group has long been
shaping the market and setting
groundbreaking standards.
Convenience and security are
given the highest priority when
opening and closing doors.
Quality for more
than 100 years
For more than a century, the
Group has off ered complete
solutions that focus not just
on the individual product
but, above all, on the overall
system. For the automatic
entrance systems, the mature
mechanical components
supplement the intelligent
electronics components
ideally.
More than just products:
planning, implementation,
service
We support you in all phases
in achieving your individual
entrance solutions. Short
decision paths and fast, re-
liable service allow solutions
that are optimised technically
and economically and perfectly
adapted to your individual,
building-specifi c requirements.
System solutions
as a whole
The wide-ranging assort-
ment of the most up-to-date
mechanical products with the
highest quality meet the re-
quirements of the market. Our
focus, however, is not just on
individual products, but on the
design of complete solutions
that meet the most up-to-date
requirements.
4
The slim sliding door with elegant appearance
compactMaster CM / CM-F in-line sliding door
With their compact design and attractive, elegant appearance,
the compactMaster in-line sliding door harmonises especially well
with architecturally sophisticated glass façades and emphasises
their munifi cence and transparency.
With a "real" drive height of only 100 mm, the upper door panel
profi le of the slim profi le system is integrated into the drive and
concealed with a cover.
Slim and technically perfect
Large carriage wheels and a rubber mat under the running track
ensure outstanding running smoothness.
The drives are certifi ed to DIN 18650 and type-tested by TÜV,
thus complying with the current standards and regulations. The
redundant drive system CM-F is suitable for use in escape and
rescue routes (German regulation AutSchR).
5
Cover support
End stop
MotorEmergency-open battery
Carriage
Control unitPower supply unit
Belt connection Belt
Lock (optional)
Pulley
2nd motor *
Running track profile
Rubber profile
Support profile
Cover profile
* Required for drive type CM-F
■ Redundant drive with 2 motors for use in escape
and rescue routes (type CM-F)
■ "Actual" height of drive 100 mm
■ Running smoothness thanks to large carriage wheels
with exchangeable rubber-coated running surface
■ Fast opening speed of up to max. 0.9 m/s
■ Clear and simple operation
■ With locking element integrated into the running carriage
or AMV automatic multi-point locking system as an option
■ Self-learning control system with many connection and
adjustment options
Convincing in detail:
Designation compactMaster CM compactMaster CM-F
Application 1-leaf 2-leaf 1-leaf 2-leaf
Version for escape routes
Clearance width [1] 800 – 2000 mm 800 – 3000 mm 800 – 2000 mm [2] 800 – 3000 mm [2]
Clearance height [1] max. 3000 mm
Height of drive 100 mm
Door leaf weight max. 100 kg / leaf
Supply voltage 230 V AC, 50 Hz
Power consumption max. 160 VA (50 VA during operation)
Hold-open time 0 – 60 s 0 – 99 s
Hold-open time with key impulse 0 – 99 s
Opening speed max. 0.7 m/s max. 0.9 m/s
Closing speed max. 0.5 m/s
Winter opening width [2] 50% – 100% of the clear passage width
Protection class / ambient temperature IP 20 (for dry rooms only) / -15 °C up to +50 °C
[1] Standard dimensions, taking into account the overall measurement, the ratio of height and width and the local installation conditions; special solutions on request. [2] The mandatory escape route width must be observed.
6
Reliable and economical – for almost all applications
econoMaster EM / EM-F in-line sliding door
The tried and tested technology of the econoMaster drive system
with 2 wheels and one counter wheel per carriage guarantees high
cycle numbers and little wear.
With permissible door leaf weights of up to 100 kg, large passage
widths can be achieved with our slim G30 profi le system or with
thermally separated profi le systems with an outstanding price-
performance ratio. Whether your door assembly consists of drive
Reliable and easy to install
and sliding panels only or also includes sidelights or fanlights, GU
Automatic off ers you full service, consisting of installation, com-
missioning, and maintenance.
The drives are certifi ed to DIN 18650 and type-tested by TÜV and
comply with the current guidelines and standards. The EM-F drive
system is tested and suitable for use in emergency and escape
routes (German regulation AutSchR).
7
■ Redundant drive with 2 motors for use in escape
and rescue routes (type EM-F)
■ Matured and proven mechanics
■ Fast opening speed of up to max. 0.9 m/s
■ Clear and simple operation
■ Door locking element in the carriage (option)
■ Easy mounting of running track and drive components
■ Self-learning control system with many connection and
adjustment options
Convincing in detail:
Cover supportMotor Emergency-open
battery Control unit Power supply unitBelt connection
Carriage
Lock (optional) Belt
Pulley
Cover support
2nd motor *
Running track profile
Cover profile
Designation econoMaster EM econoMaster EM-F
Application 1-leaf 2-leaf 1-leaf 2-leaf
Version for escape routes
Clearance width [1] 800 – 2000 mm 800 – 3000 mm 800 – 2000 mm [2] 800 – 3000 mm [2]
Clearance height [1] max. 3000 mm
Height of drive 130 mm
Door leaf weight max. 100 kg / leaf
Supply voltage 230 V AC, 50 Hz
Power consumption max. 160 VA (50 VA during operation)
Hold-open time 0 – 60 s 0 – 99 s
Hold-open time with key impulse 0 – 99 s
Opening speed max. 0.7 m/s max. 0.9 m/s
Closing speed max. 0.5 m/s
Winter opening width [2] 50% – 100% of the clear passage width
Protection class / ambient temperature IP 20 (for dry rooms only) / -15 °C up to +50 °C
[1] Standard dimensions, taking into account the overall measurement, the ratio of height and width and the local installation conditions; special solutions on request. [2] The mandatory escape route width must be observed.
* Required for drive type EM-F
8
The problem-solver for special requirements
heavyMaster HM / HM-F in-line sliding door
The heavyMaster sliding door drive is the problem solver for your
special requirements. Sliding panels with large dimensions or
heavy weights of up to 200 kg are driven reliably and silently.
Even in very high-traffi c entrance areas, the heavyMaster ensures
optimal running characteristics with the least wear, thanks to the
stable carriage and wheels with rubber-coated running surface.
Robust and powerful
Sliding panels made of steel or framed with thermally separated
system profi les can be optimally combined with the heavyMaster.
The drives are certifi ed to DIN 18650 and type-tested by TÜV and
comply with the current guidelines and standards. The HM-F drive
system is tested and suitable for use in emergency and escape
routes (German regulation AutSchR).
9
■ Redundant drive with 2 motors for use in escape and
rescue routes (type HM-F)
■ Stable carriage with large wheels
■ Running smoothness thanks to carriage wheels with
exchangeable rubber coating
■ Clear and simple operation
■ Door locking element in the carriage (option)
■ Delicate-appearing G30 profile system for sliding panels
with up to 120 kg door leaf weight
■ Self-learning control system with many connection and
adjustment options
Convincing in detail:
Designation heavyMaster HM heavyMaster HM-F
Application 1-leaf 2-leaf 1-leaf 2-leaf
Version for escape routes
Clearance width [1] 800 – 2000 mm 1000 – 3000 mm 800 – 2000 mm [2] 1000 – 3000 mm [2]
Clearance height [1] max. 3000 mm
Height of drive 130 mm
Door leaf weight max. 200 kg / leaf max. 160 kg / leaf
Supply voltage 230 V AC, 50 Hz
Power consumption max. 160 VA (50 VA during operation)
Hold-open time 0 – 60 s 0 – 99 s
Hold-open time with key impulse 0 – 99 s
Opening speed max. 0.7 m/s max. 0.9 m/s
Closing speed max. 0.5 m/s
Winter opening width [2] 50% – 100% of the clear passage width
Protection class / ambient temperature IP 20 (for dry rooms only) / -15 °C up to +50 °C
[1] Standard dimensions, taking into account the overall measurement, the ratio of height and width and the local installation conditions; special solutions on request. [2] The mandatory escape route width must be observed.
Cover support
End stop
Motor Emergency-open battery
Carriage
Control unitPower supply unit Belt
Lock (optional)
Belt connection
Running track profile
Rubber profile
Support profile
Cover profile
10
For maximum passage widths in minimum space
econoMaster EMT / EMT-F telescopic sliding door
Telescoping sliding doors are ideally suited to achieving a broad
passageway and optimal people fl ow in narrow spaces.
The continuous fl oor guide helps to stabilise the sliding panels.
Fast opening, large entrances
The drives are certifi ed to DIN 18650 and type-tested by TÜV
and comply with the current guidelines and standards. The EMT-F
drive system is tested and suitable for use in emergency and
escape routes (German regulation AutSchR).
11
■ Redundant drive with 2 motors for use in escape
and rescue routes (type EMT-F)
■ Running smoothness thanks to large carriage wheels
■ Running track warp resistance
Convincing in detail:
Designation econoMaster EMT econoMaster EMT-F
Application 2-leaf 4-leaf 2-leaf 4-leaf
Version for escape routes
Clearance width [1] 900 – 2500 mm 1400 – 3800 mm 900 – 2500 mm [2] 1400 – 3800 mm
Clearance height [1] max. 3000 mm
Fanlight height max. 800 mm
Height of drive 145 mm
Door leaf weight max. 100 kg / leaf max. 80 kg / leaf max. 100 kg / leaf max. 80 kg / leaf
Supply voltage 230 V/AC, 50 Hz
Power consumption max. 160 VA (50 VA during operation)
Hold-open time 0 – 60 s 0 – 99 s
Hold-open time with key impulse 0 – 99 s
Opening speed max. 0.7 m/s max. 0.9 m/s
Closing speed max. 0.5 m/s
Winter opening width [2] 50% - 100% of the clear passage width
Protection class / ambient temperature IP 20 (for dry rooms only) / -15 °C up to +50 °C
[1] Standard dimensions, taking into account the overall measurement, the ratio of height and width and the local installation conditions; special solutions on request. [2] The mandatory escape route width must be observed.
Clearance width
Total width
Cle
aran
ce h
eig
ht
To
tal h
eig
ht
Clearance width
Total width
Cle
aran
ce h
eig
ht
To
tal h
eig
ht
Clearance width
Cle
aran
ce h
eig
ht
Tota
l he
igh
t
4-leaf, with sidelights
Design types (representation available in 4-leaf version and in 2-leaf version)
4-leaf, with sidelights and fanlights
4-leaf, only door leaves
■ Fast opening speed of up to max. 0.9 m/s
■ Clear and simple operation
■ Integrated door locking element in the carriage
■ Self-learning control system with many connection
and adjustment options
Telescoping sliding doors off er large passage widths
Clearance width
Total width
12
Rounded out – sliding door with a revolving appearance
compactMaster CMR / CMR-F curved sliding door
A curved sliding door combines the generous appearance of a cy-
lindrical door system with the advantages of an easily accessible
sliding door. Whether adapted to the facade in the form of a fl at
curved sliding door, a semicircle, or a full circle up to a diameter of
4000 mm, the compactMaster CMR / CMR-F curved sliding door
always optimally fi ts the architecture of a building.
Absolutely sophisticated as an arch or complete circle
For escape and rescue routes, the CMR-F sliding door version
off ers opening widths up to 2500 mm.
The drives are certifi ed to DIN 18650 and type-tested by TÜV and
comply with the current guidelines and standards. The CMR-F
drive system is tested and suitable for use in emergency and
escape routes (German regulation AutSchR).
13
■ Redundant drive with 2 motors for use in escape
and rescue routes (type CMR-F)
■ Running smoothness thanks to large carriage wheels
and self-aligning bearing-supported carriage wheels
Convincing in detail:
■ Fast opening speed of up to max. 0.9 m/s
■ Clear and simple operation
■ Integrated door locking element at the sliding panel
■ Self-learning control system with many connection and
adjustment options
Designation compactMaster CMR compactMaster CMR-F
Application 1-leaf 2-leaf 1-leaf 2-leaf
Version for escape routes
Clearance width [1] 800 – 1250 mm 1000 – 2500 mm 800 – 1250 mm [2] 1000 – 2500 mm
Clearance height [1] max. 2700 mm
Height of drive 115 mm
Door leaf weight max. 100 kg / leaf
Supply voltage 230 V/AC, 50 Hz
Power consumption max. 160 VA (50 VA during operation)
Hold-open time 0 – 60 s 0 – 255 s
Hold-open time with key impulse 0 – 255 s
Opening speed max. 0.7 m/s max. 0.9 m/s
Closing speed max. 0.5 m/s
Winter opening width [2] 50% - 100% of the clear passage width
Protection class / ambient temperature IP 20 (for dry rooms only) / -15 °C up to +50 °C
[1] Standard dimensions, taking into account the overall measurement, the ratio of height and width and the local installation conditions; special solutions on request. [2] The mandatory escape route width must be observed.
■ Semicircle
■ Complete circle
360°
■ Arc
■ Radii
of 1000 – 3000 mm
Options:
■ Inclusion in building management systems and
access controls
■ LED spotlights for installation in the bottom of the
aluminium ceiling
■ Glass ceiling
■ Air curtain system
■ Loose-fixed flange connection
■ Entrance matting
14
Entrance doors adapted to the building architecture
compactMaster CMW / CMW-F prismatic sliding door
An exceptional sliding door to give your entrance area an indi-
vidual touch. Every angle between 90° and 179° can be achieved.
Corresponding safety sensors safeguard the main closing edge in
compliance with DIN 18650.
Visual accents for any desired angle
With a "real" drive height of 100 mm, the upper door leaf profi le
of the slim profi le system is completely integrated in the drive
unit and concealed by the hood. The prismatic sliding door can
thus be easily and attractively integrated into all delicate sub-
structures.
15
■ Redundant drive with 2 motors for use
in escape and rescue routes (type CMW-F)
■ Running smoothness thanks to carriage wheels with
exchangeable rubber coating
■ "Actual" height of drive 100 mm
Convincing in detail:
■ Fast opening speed of up to max. 0.9 m/s
■ Clear and simple operation
■ Integrated door locking element in the carriage
■ Self-learning control system with many connection and
adjustment options
Designation compactMaster CMW compactMaster CMW-F
Application 2-leaf 2-leaf
Version for escape routes
Clearance width [1] 900 – 2000 mm 900 – 2000 mm [2]
Clearance height [1] max. 2750 mm
Height of drive 100 mm
Door leaf weight max. 100 kg / leaf
Supply voltage 230 V/AC, 50 Hz
Power consumption max. 160 VA (50 VA during operation)
Hold-open time 0 – 60 s 0 – 99 s
Hold-open time with key impulse 0 – 99 s
Opening speed max. 0.7 m/s max. 0.9 m/s
Closing speed max. 0.5 m/s
Winter opening width [2] 50% - 100% of the clear passage width
Protection class / ambient temperature IP 20 (for dry rooms only) / -15 °C up to +50 °C
[1] Standard dimensions, taking into account the overall measurement, the ratio of height and width and the local installation conditions; special solutions on request.[2] The mandatory escape route width must be observed.
Drive claddingDriv
e cladding
90° – 179°
5050
32,532,5
Clearance width
16
Combi-switchSummer/winter/APO / FWS
■ Summer / winter switch (reduced
opening width)
■ "Pharmacy" function
■ For setting the programme types: off/
locked, exit, automatic, permanently
open
■ White frame (standard)Fig.: stainless steel frame
Versions / order numbers
Installation variants Order numbers
Flush-mounted A-8002380
Surface-mounted A-8002420
Accessories – order information
Sliding doors
Versions / order numbers
Installation variants Order numbers
Flush-mounted A-8002210
Surface-mounted A-8002310
Programme selection switch (FWS)
■ For setting the programme types: off/
locked, exit, automatic, permanently
open
■ Key removable in every programme
type
■ White frame (standard)
Fig.: stainless steel frame
Summer/winter/APO
■ Summer / winter switch (reduced
opening width)
■ "Pharmacy" function
■ White frame (standard)
Fig.: stainless steel frame
Versions / order numbers
Installation variants Order numbers
Flush-mounted A-8002230
Surface-mounted A-8002330
Programme selection switch PO6
■ For setting the programme types: off/
locked, exit, automatic, permanently
open, exit winter, automatic winter
■ Key removable in every programme
type
■ For customer-provided PHZ 27 mm
Versions / order numbers
Installation variants Order numbers
Flush-mounted A-7124740
Surface-mounted A-7124730
17
Display programme switch (DPS)
■ For setting and display of the pro-
gramme types: off/locked, exit, auto-
matic, permanently open
■ Error display, service
■ In combination with a key pushbutton,
suitable for use in escape-route sliding
doors (authorised personnel)
■ White frame (standard)
Versions / order numbers
Installation variants Order numbers
Flush-mounted A-8000420
Surface-mounted A-8000410
Versions / order numbers
Designation Order numbers
Safety-button light
barrierA-7130810
Evaluation unit A-7130820
Safety-button light barrier
■ To secure the open passageway in the
heights of 200 and 1000 mm
■ Note: According to DIN 18650-2, not
suitable for people needing special
protection
Versions / order numbers
Designation Order numbers
Rain hood Active 8 A-7133410
Rain hood Active 8
■ To minimise control errors when it rains
Radar motion detector with safe-guard curtain (DIN 18650)
Active 8 ONE ON ■ Direction detection
■ Testable presence curtain, 2-rows
Active 8 THREE ON ■ Direction detection and self-monito-
ring
■ Testable presence curtain, 2-rows
Versions / order numbers
Designation Order numbers
Impulse transmitter
Active 8 ONE ONA-7125440
Impulse transmitter
Active 8 THREE ONA-7125450
■ For use in sliding doors, escape and
rescue routes (inside, in the escape
direction)
18
Accessories – order information
Sliding doors
Elbow switch
■ Large-surface pushbutton in surface-
mounted design
■ Including decal "Press here"
Versions / order numbers
Designation Order numbers
Elbow switch A-8001940
Elbow switch in stainless steel design
A-8003560
Decal "Press here" A-7025010
Magic Switch impulse transmitter
■ For touch-free control of automatic
doors
■ Activation through hand movement,
direction-sensitive
■ Distance: 20 – 50 cm
Versions / order numbers
Designation Order numbers
Impulse transmitter
Magic Switch A-7032820
Radar motion detector
Eagle ONE ■ Direction detection
Eagle THREE N ■ Direction detection and self-monito-
ring
■ For use in sliding doors, escape and
rescue routes (inside, in the escape
direction)
Versions / order numbers
Designation Order numbers
Radar Eagle ONE A-7023370
Radar Eagle THREE N A-7117420
Rain hood Eagle
■ To minimise control errors when it rains
Versions / order numbers
Designation Order numbers
Rain hood Eagle A-7023630
19
Key switch
■ For customer-provided PHZ 27 mm
■ Grey frame (standard)
Versions / order numbers
Installation variants Order numbers
Flush-mounted A-7025570
Surface-mounted A-7025550
EMERGENCY STOP
■ Stops the system when actuated
■ Deactivate by turning
■ White frame (standard)
Fig.: stainless steel frame
Versions / order numbers
Installation variants Order numbers
Flush-mounted A-8002140
Surface-mounted A-8002360
Code keyboard
■ For control of doors by means of a
numerical code
■ Dimensions: 80 x 80 x 12 mm
Evaluation unit
■ For use inside
■ Dimensions: 110 x 180 x 40 mm
Versions / order numbers
Designation Order numbers
Code keyboard A-7109120
Evaluation unit A-7109130
Mechanical fl oor lock
■ For mounting on sliding door panels
■ It can also be locked on both sides with
appropriate processing of the G30 slim
profile system (customer-provided
profile cylinder)
Versions / order numbers
Designation Order numbers
Mechanical
fl oor lockA-8004110
20
Barrier freedom and comfort even for noise-sensitive areas
turnMaster swing door drive
Even large and heavy doors can be opened in a controlled way
and without eff ort by the user. The turnMaster electromechanical
swing door drive is also especially quiet, which makes it suitable
for use in areas which are particularly sensitive to noise.
A variety of functions for maximum convenience
The turnMaster is available for one-leaf doors in both push-open
or pull-open versions. The operation modes – fully automatic,
servo drive und low-energy operation – are integrated into one
device and can be selected when mounting.
21
■ Outstandingly quiet, electromechanical swing door drive
■ Built-in function selector switch with LED indication
■ Type-tested by TÜV and certified to DIN 18650
■ Adjustable wind pressure function
■ Slot for radio receiver card
Convincing in detail:
■ Motor lock, SECURY A-opener, electric door opener and
safety sensors can be connected directly
■ Easy, time-saving installation, commissioning and mainte-
nance
■ Self-learning control system with many connection and
adjustment options
Designation turnMaster
Version Push-open Pull-open
Opening electromechanical
Key bitting spring force
Closing force (according to EN 1154) size 3 – 6 size 3 – 5
In case of power failure door closer function
Opening angle 130° 98°
Opening speed adjustable
Hold-open time adjustable
Supply voltage 230 V AC, 50 Hz
Power consumption 200 VA
Door leaf weight max. 250 kg
Door leaf widths 700 – 1400 mm 700 – 1250 mm
Protection class / ambient temperature IP 20 (for dry rooms only) / -15 °C up to +50 °C
Dimensions (W x H x D) 700 x 104 x 135 mm
Power supply for external accessories 24 V DC, 1.2 A
Operation modes:
■ Automatic operation
■ Servo operation
■ Low-energy operation
135
Sensor Sensor
10
4
Accessories:
■ Push-open linkage up to max. 250 mm
soffit depth
■ Pull-open slide arm from -10 to +33 mm
soffit depth
■ Sensor strips
■ Axle extension 12 or 48 mm
■ Door stop
22
High-performance on standard and fi re protection doors
swingMaster swing door drive
The electro-hydraulic swingMaster DTH swing door drive is suit-
able for use on outside doors in façades and on inside doors made
of wood, aluminium or steel – also for later automation. Two-leaf
doors with stops can be safely opened and closed again in the
correct sequence through the integrated door leaf coordinator.
Safely barrier free
In the swingMaster DTB version, the swing door drive has a
permit for use on fi re protection doors. Fire protection doors with
a leaf width of up to 1400 mm are opened automatically and in
case of fi re safely closed again by means of the integrated spring.
Passage widths of 2800 mm can thus be achieved with two-leaf
stop doors.
23
■ Robust electro-hydraulic swing-door drive
■ Push & go function can be activated
■ Easy, time-saving installation and commissioning
Convincing in detail:
■ Steplessly adjustable closing force
■ Many connection and adjustment options, e.g. with smoke
and heat exhaust supply air
■ Combinable with GU-SECURY Automatic multi-point locking
with A-opener
Designation swingMaster DTH swingMaster DTB
Application 1-leaf 2-leaf 1-leaf 2-leaf
For use on fi re and smoke protection doors
Push-open version
Pull-open version
Opening electro-hydraulic
Key bitting spring force
Closing force (according to EN 1154) size 3 – 6
Opening angle 115°
Opening speed adjustable
Hold-open time adjustable
Supply voltage 230 V AC, 50 Hz
Power consumption 300 VA
Door leaf weight max. 250 kg
Door leaf widths 690 – 1400 mm
Protection class / ambient temperature IP 20 (for dry rooms only) / -15 °C up to +50 °C
Dimensions (W x H x D) 690 x 104 x 134 mm
Power supply for external accessories 24 V DC, 1.2 A
max 300
max
. 32
134
10
4
30 mm axle extension
Door leaf weight (kg)
Do
or
leaf
wid
th (
mm
)
1400
1300
1200
1100
1000
10
0
11
5
13
0
14
5
16
0
25
0
24
Individual solutions are standard
GRA standard revolving door
With standard revolving doors, building entrances can be
designed functionally and protected against draught and noise.
The variable design and multitude of options allow for individual
solutions varying in function, appearance and size. Depending on
usage requirements, the standard revolving door can be
operated manually, semi-automatically with push & go function,
or automatically with radar activation sensors. The drum walls
Eff ective protection against draughts, cold and dirt
may be designed with glass but also with heat-insulated panels of
sheet metal. Regardless of which options you choose, user safety
is always the top priority. The semi-automatic or fully automatic
revolving door is certifi ed to DIN 18650 and type-tested by TÜV
and complies with the current standards and regulations.
25
■ Individual solutions through variable design with a multitude
of options
■ Turnstile of slim-profile aluminium-glass construction
■ Drum walls made of curved 10 mm laminated sheet glass
(LSG) or heat-insulated sheet-metal panels
Convincing in detail:
■ Minimum crown height 175 mm
■ Electromechanical locking at the turnstile (only for the auto-
matic version) or with mechanical shoot bolt locks
■ Push & go function can be activated
GRA standard revolving door
D* A* B* C / 3-leaf C / 4-leaf E
1800 2100 – 3000 175 – 800 ~ 830 ~ 1220 1860
2000 2100 – 3000 175 – 800 ~ 920 ~ 1350 2060
2200 2100 – 3000 175 – 800 ~ 1010 ~ 1490 2260
2400 2100 – 3000 175 – 800 ~ 1105 ~ 1620 2460
2600 2100 – 3000 175 – 800 ~ 1195 ~ 1760 2660
2800 2100 – 3000 175 – 800 ~ 1285 ~ 1890 2860
3000 2100 – 3000 175 – 800 ~ 1375 ~ 2030 3060
3200 2100 – 3000 175 – 800 ~ 1465 ~ 2160 3260
3400 2100 – 3000 175 – 800 ~ 1555 ~ 2290 3460
3600 2100 – 3000 175 – 800 ~ 1645 ~ 2430 3660
3800 2100 – 3000 175 – 800 ~ 1690 ~ 2490 3860
* Special dimensions available on request
BA
C
E
Ø = D
C
E
Ø = D
Options:
■ Folding mechanism for summer position
■ Manual or automatic night locking
■ Air curtain systems in different versions
■ LED lamps in the ceiling
■ Stainless steel bottom ring
26
Perfect integration of the entrance area into glass façades
GGG all-glass revolving door
All-glass revolving doors are not just functional, but exceedingly
presentable. The minimum profi le sizes permit maximum trans-
parency, even with automatic all-glass revolving doors, since the
drive is located in the fl oor.
Sophisticated and inviting
Customer-specifi c adaptations and desires, such as swing-out
leaves for summer opening or an automatic night lock feature, can
always be included and implemented quickly. The semi-automatic
and automatic revolving door are certifi ed to DIN 18650 and
type-tested by TÜV and comply with the current standards and
regulations.
27
■ Maximum portion of glass
■ Turnstile of slim-profile aluminium-glass construction
■ In manual, semi-automatic and fully automatic versions
Convincing in detail:
■ Manual and automatic night lock feature
■ Electromechanical locking at the turnstile (only for the auto-
matic version) or with mechanical shoot bolt locks
■ Push & go function can be activated
GGG all-glass revolving door
D* A* B** C / 3-leaf C / 4-leaf E
1800 2100 – 3000 16 ~ 830 ~ 1220 1860
2000 2100 – 3000 16 ~ 920 ~ 1350 2060
2200 2100 – 3000 16 ~ 1010 ~ 1490 2260
2400 2100 – 3000 16 ~ 1105 ~ 1620 2460
2600 2100 – 3000 18 ~ 1195 ~ 1760 2660
2800 2100 – 3000 18 ~ 1285 ~ 1890 2860
3000 2100 – 3000 18 ~ 1375 ~ 2030 3060
* Special dimensions available on request ** Or according to structural requirements
BA
C
E
Ø = D
C
E
Ø = D
Options:
■ Manual or automatic night locking
■ Horizontal or vertical door handles for manual operation
■ Folding mechanism for summer position
■ Loose-fixed flange connection
■ Floor pan
■ Air curtain system, vertical
28
Comfortable entry, even with heavy foot traffi c
GGR large-capacity revolving door
For large visitor fl ows and use in escape and rescue routes, the
large-capacity revolving door is the elegant and energy-saving
entrance solution. This door combines modern design with high
functionality in an ideal way. For example, comfortable passage
with shopping carts and prams or wheelchairs is always possible.
Suitable for escape and rescue routes
The leaves are divided in two and held securely with magnetic
clamps in normal operation. In the event of a fi re or a power
failure, or if the emergency button has been pushed, the panel
fi xation is released so the sliding panels can be folded away at the
centre pillar in the direction of escape. The fully automatic revol-
ving door is secured with sensors and contact strips according to
the current standard DIN 18650 and type-tested by TÜV.
29
■ Ideal for heavy visitor traffic
■ Offers plenty of space for shopping carts, prams, wheelchairs
■ Suitable for use in escape and rescue routes due to foldable
panels, which are securely fixed in normal operation
Convincing in detail:
■ Different materials and finishes for individual solutions
■ Manual or automatic night lock feature
■ Locked with shoot bolt locks on the door panels or with night
lock
GGR large-capacity revolving door
D* A* B* C / 3-leaf C / 4-leaf E
3600 2100 – 2500 500 – 800 ~ 1630 ~ 2408 3720
4800 2100 – 2500 500 – 800 ~ 2230 ~ 3257 4920
5400 2100 – 2500 500 – 800 ~ 2530 ~ 3681 5520
6000 2100 – 2500 500 – 800 ~ 2830 ~ 4105 6120
* Special dimensions on request in intermediate steps up to diameter 6200 mm
BA
C
E
C
E
Ø = D Ø = D
Options:
■ Drum walls made of curved 10 mm laminated sheet glass
(LSG) or heat-insulated sheet-metal panels
■ Roof outdoors waterproof
■ LED lamps in the ceiling
■ Loose-fixed flange connection
■ Floor pan
■ Air curtain systems in different versions
30
Secure access control and fast passage
GSI security revolving door
Access to safety-sensitive buildings or areas within a building
can be controlled through security revolving doors. Besides
functionality, the building architecture is taken into conside-
ration according to the customer's wishes, so a tailor-made
solution always results.
Access controlled in both directions
In the initial position, the security revolving door is by means of a
motor-driven brake system. An access control system releases it.
Unauthorised persons are conducted out of the drum in the exit
direction.
31
■ Access control even with heavy people traffic
■ Access control in both directions
■ Draught-free and always noise-protected access control
■ Manual or automatic night lock feature
Convincing in detail:
■ Electro-motorised locking at the turnstile and / or by means of
mechanical shoot bolt locks
■ Problem-free adaptation to on-site access control systems
■ Different materials and finishes for individual solutions
GSI security revolving door
D* A* B* C / 3-leaf C / 4-leaf E
1800 2100 – 3000 350 – 800 ~ 859 ~ 1239 1860
1900 2100 – 3000 350 – 800 ~ 907 ~ 1308 1960
2000 2100 – 3000 350 – 800 ~ 954 ~ 1377 2060
2100 2100 – 3000 350 – 800 ~ 1002 ~ 1446 2160
2200 2100 – 3000 350 – 800 ~ 1050 ~ 1514 2260
* Special dimensions available on request
BA
C
E
C
E
Ø = D Ø = D
Options:
■ Drum walls made of curved 10 mm laminated sheet glass
(LSG) or heat-insulated sheet-metal panels
■ Safety glass
■ LED spotlights for installation in the aluminium ceiling
■ Roof outdoors waterproof
■ Bottom ring with floor pan
32
Single-person access control and transparency
GSI security curved sliding door
With a minimum diameter of one metre, access control can be
carried out in the smallest space. Transparency is maintained due
to the high glass portion. A 2-zone contact mat is used to monitor
the entrance area for authorised and unauthorised users. In the
initial position, the door leaves are electromechanically locked.
If an access control system authorises entry, the door opens
automatically.
Access control in the narrowest space
As soon as the user enters the sluice and steps on the contact
mat, the door will close again. As soon as the door is closed, the
opposite door is automatically opened. The sluice can then be
departed again. If the sluice is entered without authorisation, the
ongoing sluice process is interrupted. The corresponding door
remains open until the sluice area is empty again.
33
■ Access control in the narrowest space, from a diameter of 1 m
■ Sense of spaciousness and transparency due to the large glass
portion
Convincing in detail:
■ Single-person access control and sluice area monitoring by
means of 2-zone contact floor mat
■ Problem-free adaptation to on-site access control systems
GSI security curved sliding door
D* A* B* C E
1000 2100 – 3000 350 – 800 ~ 500 1060
1300 2100 – 3000 350 – 800 ~ 600 1360
1500 2100 – 3000 350 – 800 ~ 700 1560
* Special dimensions available on request
Options:
■ Sliding panels and drum walls made of curved 10 mm
laminated sheet glass (LSG)
■ LED spotlights for installation in the aluminium ceiling
BA
C
E
Ø = D
■ Available in different finishes and colours
34
The modular all glass sliding partition
shopMaster GSW-M all-glass system
The all-glass sliding partition system shopMaster GSW-M allows
creation of partition walls and shop-fronts for shop-in-shop con-
cepts in a multitude of individual designs. There are virtually no
limits placed on the planner's creativity, since solutions can be
implemented for practically any fl oor plan. According to require-
ments, the all-glass sliding partitions are available in linear, curved
or segmented designs. The units can be arranged fl exibly; a
fl oor guide is not needed. The system's compact design requires
Flexible and transparent
only minimal space for running track and parking niche. The use
of Swing&Slide panels equipped with a door closer is just one
way of providing variable passages. The running mechanisms
are equipped with high-quality ball-bearing-supported carriage
wheels and ensure permanently reliable operation and smooth
motion of the elements during opening and closing. In case of
glass breakage, the clamping profi les are protected from falling by
special fi ttings.
35
■ Modular design with prefabricated function elements
■ Can be combined with BKS electro-clutch locks
■ No continuous floor guide required
Convincing in detail:
■ Ball bearing supported and plastic-coated high-quality runners
■ Two-part running track allows flexible creation of curves
■ Locking elements for segmented systems
Designation shopMaster GSW-M
Max. element height 3500 mm*
Max. element width 1250 mm*
Max. element weight 150 kg
Possible glass thicknesses 10 / 12 mm
Running track version linear / angled / segmented / curved from a radius of 6000 mm
Finishes
silver colour E6 / EV1 anodized
RAL colour as desired (powder coating)
stainless steel appearance
* Special solutions on request
Carriage
End cap
Face fi xed locking
bolt (optional, depending
on panel type)
Extension profi le
(optional)
Running track,
2-part
Base profi le
Clamping
profi le
Closing
profi le
End cap
Glass
(toughened,
10/12 mm)
Glass
(toughened,
10/12 mm)
36
Comfort and safety with automatically driven elements
shopMaster GSW-A all-glass system
The automatic all-glass sliding partition system shopMaster
GSW-A off ers a wide variety of design options for architects and
planners, such as partition walls and façade concepts, as well
as maximum convenience for operators or users. The system's
compact design requires only minimal space for running track and
parking niche. The running modules are equipped with state-
of-the-art carriages with plastic-coated, ball-bearing supported
rollers.
Exclusive and convenient
These guarantee reliable functioning and noiseless movement of
the elements throughout their service lives. Thanks to the small
running track height of 86.5 mm, installation fl ush with the ceiling
is possible almost everywhere. The required fl oor guide provides
additional stability and utmost convenience to the user. For safety
reasons, the automatic all-glass sliding wall can be moved by hand
in the event of a power failure.
37
Functional features:
■ Obstacle recognition
■ Maximum impact force 150 N
■ Automatic locking
■ Small installation height
■ Distance between moving panels adjustable: 50 – 1500 mm
■ Ball bearing supported and plastic-coated high-quality runners
Convincing in detail:
■ Continuous floor guide
■ Panels movable by hand in the event of a power failure
■ Optionally with fully automatic wall cover for parked panels
Designation shopMaster GSW-A
Max. element height 3500 mm*
Max. element width 1250 mm*
Max. element weight 150 kg
Max. number of elements 32
Possible glass thicknesses 10 / 12 mm
Nominal voltage 230 V AC, 50 Hz
Nominal power 230 W
Operating current 24 V DC
Ambient temperature -15 °C to +50 °C
Protection class IP 20
Speed adjustable from 50 – 150 mm/s
Running track version linear / angled / curved from a radius of 6000 mm*
Finishes
silver colour E6 / EV1 anodized
RAL colour as desired (powder coating)
stainless steel, matt polished**
* Special solutions on request ** Module cladding anodized similar to stainless steel
Sliding panel
with drive module and current collecting module, each positioned
above the base profi le; fl oor guidance is provided by the roller pin
running in the fl oor rail.
Turn-only end panel
opens and closes automatically as the sliding wall system is
released or locked, respectively.
■ Decelerated speed into the end positions
■ Emergency release via profile cylinder
38
The GU pledge
Through a type test, the TÜV confi rms that the requirements
from the relevant standards and directives are met.
But it does not take into account the hazards resulting from local
conditions or the specifi c building use.
And so before installation and commissioning of the system, a
hazard analysis that takes the local conditions into account must
be performed.
Ideally, the safety concept will be coordinated with the customer
or operator in the planning phase.
The Gretsch-Unitas Group off ers:
■ individual advice
■ qualified project handling
■ correct installation
■ reliable service
This ensures that commissioning takes place without unpleasant
surprises. All required safety components are taken into account
and need only be tested for proper functioning at commissioning.
Tested safety
Safety: successfully certifi ed
DIN 18650: Safety requirements for automatic door systems
DIN 18650 regulates safety for automatic door systems in
Germany, Austria and Switzerland.
Besides product and safety requirements, it describes the
acceptance inspection at the installation location, maintenance
and regular checks.
More than 100 years of experience
Worldwide presence
System solutions in the project
Advice right from the planning stage TÜV type-tested Safety through quality manufacturing
39
The Gretsch-Unitas Group – your modern partner
The GU service
Regular, professional maintenance is the best guarantee of main-
taining the value and functional safety of automatic doors over
the years.
In Germany, GU Service GmbH on behalf of GU Automatic GmbH
installs automatic sliding doors, swing door drives, revolving
doors, all-glass sliding walls and security doors.
After-sale service directly from the manufacturer with its own
personnel, optimal product knowledge and use of original
replacement parts ensures the greatest functional availability of
automatic door systems. Short travel times are ensured due to a
comprehensive network of service installers.
An automatic door system must also be tested at least once per
year by an expert. Besides this safety check, maintenance ac-
cording to the manufacturer's specifi cations must be performed.
Ideally, this takes place at the same appointment.
Safety check and maintenance
A service contract for automatic door systems off ers many advan-
tages:
■ Early recognition of wear ensures operational and personal
safety
■ Unplanned service work is markedly reduced
■ Regular inspection of safety components minimizes the
operator's potential liability risk
■ Provision and updating of a system-specific inspection book
■ Possible hazards resulting from a change in use are recognized
and can be eliminated
■ Service customers receive discounts on parts prices and pay
fixed travel fees
Special solutions development
Products in stock around the globe
Modular system technology
Correct installation Service and maintenanceLogistics – just-in-time wherever you are
The service contract
GU Automatic GmbH
Stahlstr. 8
D-33378 Rheda-Wiedenbrück
Tel. + 49 (0) 5242 924-0
Fax + 49 (0) 5242 924-100
WP
00
45
0-0
4-4
-2
07/
11
P
rin
ted
in G
erm
any
www.g-u.com
BKS GmbH
Heidestr. 71
D-42549 Velbert
Tel. + 49 (0) 2051 201-0
Fax + 49 (0) 2051 201-9733
Gretsch-Unitas GmbH
Baubeschläge
Johann-Maus-Str. 3
D-71254 Ditzingen
Tel. + 49 (0) 7156 301-0
Fax + 49 (0) 7156 301-77980