Cubot V2 Users Manual
Catalogue Assemble the band--------------------------------------------------------1
Activate---------------------------------------------------------------------------------------1
Wear------------------------------------------------------------------------------------------1
Hardware Features----------------------------------------------------------1 Touch and Use------------------------------------------------------------------------------1
Interface--------------------------------------------------------------------------------------2
Download and install APP----------------------------------------------------------------------------------------2
Download and Install-------------------------------------------------------------------------2
Settings for personal information------------------------------------------------------------2
Bind the device and data synchronization (interface of steps/ sleep / heart rate)--------------------------------------------------------------------------3
Bind the Device-------------------------------------------------------------------------------3
Data synchronization--------------------------------------------------------------------------3
On /off----------------------------------------------------------------------------------------4
Steps Interface--------------------------------------------------------------------------------4
Sleep Interface--------------------------------------------------------------------------------5
Heart Rate Interface--------------------------------------------------------------------------5
Health Management---------------------------------------------------------------------------------------------------6
Steps target----------------------------------------------------------------------------------6
Heart rate warning----------------------------------------------------------------------------6
24-hour monitoring---------------------------------------------------------------------------6
Alarm / Reminder--------------------------------------------------------------------------------------------------------7
Alarm Setting----------------------------------------------------------------------------------7
Sleep Preference-------------------------------------------------------------------------------7
Calls / SMS / WeChat Reminder---------------------------------------------------------------7
Sedentary Reminder----------------------------------------------------------------------------8
GPS--------------------------------------------------------------------------8
REMOTE CAMERA-----------------------------------------------------------------------------------------------------------9
Device Management-------------------------------------------------------------------------------------------------------9
Bind/unbind--------------------------------------------------------------------------------------9
Intelligent anti-lost-------------------------------------------------------------------------------9
Turn the wrist and brighten the screen---------------------------------------------------------10
Unit Conversion----------------------------------------------------------------------------------10
Time setting--------------------------------------------------------------------------------------10
About--------------------------------------------------------------------------11 Charge the band----------------------------------------------------------------11
USB cable CUBOT V2 band
ulna
Cubot V2 Users Manual
1. Activate(for the first time) and wear
1.1 Please connect the band with USB cable ,then charge by inserting into computer port or the
charger ,which activates the band .
1.2 When the band has been activated ,it shows the interface like :
1.3 Put the band at the right place and make sure your ulna is exposed , the heart rate sensor at back need
clinging to your skin .
2. Hardware features :
2.1 Touch and use
Touch the screen ,brighten it
Slide from left or right ,touch the screen to have page turning ,then you check all function interfaces .
2.2 Function interfaces .
3. Download and install the APP:
3.1 Click and download the app. Open "CUBOT v2" , make sure the phone is connecting to the network
(Wifi or mobile GPRS);
3.2 Scan QR code or enter major application store to download and install "CUBOT V2" (I Phone users go
to APP Store ,search and download. Android users go to Google Play Store ,search and download).
3.3 Personal information settings
3.3.1 Open the phone Bluetooth, start CubotV2 APP, for the first time use, there will be notification to set your personal
information: height , gender, weight, date of birth, steps target;
3.3.2 Users click personal profile and enter into “my” interface from the menu , fulfill every item .
click the head portrait items
3.3.3 Enter into the information setting interface ,slide and choose the number ,click ok to finish personal
information setting .
click the menu then enter the
menu bar ,click head portrait
to set personal information.
there will be a notification
when you set it for the first
time.
Renew the head
portrait ,there will be a
notification ,you can
choose shooting or
pick an image from the
gallery
click here to make
a nickname
Click and set the gender ,date
of birth ,height ,weight in turn.
there will be a suggestive
target given to you based on
your information.
Time ,date ,show
battery. steps . calories. Distance.
Heart rate.
菜单栏
Gender setting Birthday Height setting Weight setting
4. Bind the device and data synchronization (interface of steps / sleep / heart rate)
4.1 Bind the device
4.1.1 Open the app interface ,then click on top left, there will be a menu on the side bar.
4.1.2 Choose “Binding management ”,enter “binding interface” and bind the device, pick your band . After
binding , there will be a icon .
Notification :you could enter the next menu only when you bind the device .
click the menu bar choose device management choose binding management bind the device successfully
4.2 Data synchronization and the record
4.2.1 After binding successfully ,it will go to steps interface and automatically synchronize data .you slide from left or right
to have the page turning and switch the steps interface 、sleep interface 、the menu、the heart rate interface.
4.2.2 The band synchronize the data with App and auto regulation. Then later ,each time you open Cubot V2 APP, the
data automatically synchronizes once .
4.2.3 In the steps/ sleep interface ,Scroll down the menu and manually synchronize the data
monents
On the top right
of Steps/sleep
interface
Back
Click to back the previous
menu
单
Click the moments ,there will be
a note bar ,you choose one
platform to share
Menu
On the top left of
Steps/sleep
interface
(you need to ensure the band and the Bluetooth of the phone connection is normal)
4.2.4 Steps and sleep interface ,click the progress circle and check the historical record .
On and off
Slide from left or right , switch to the steps interface/sleep interface/menu interface/ heart rate interface .
click share bar beneath ,choose
a platform to share
Slide and switch
day/week/month
Click and jump to the
goal interface
1.scroll down the
drop-down list
2.click the progress to
see historical records
“Steps” interface
“Sleep” interface
1, click the drop down box to synchronize the data manually,
2, 2click the “progress” circle and check the records
click to switch
day/week/month
Slide and switch
day/week/month
click to switch
day/week/month
Click “start measuring ”to use
real time heart rate function ,click
“finish measuring ”to quit .
click to switch
day/week/month
Slide and switch
day/week/month
1.scroll down the drop-down
list
2.click the progress to see
historical records
“Heart rate” interface
5. Health management
5.1 Sports target
5.1.1 Choose “health management” and enter health management interface
5.1.2 click “sport target” and enter sport target setting interface
5.1.3 slide and set the sports target. Click ok and finish the setting .
( when you achieve your target steps ,there will be an icon and the band will vibrate.)
Choose the health management Click the sport target Set the target
5.2 open the heart rate warning and enter heart rate interface ,slide and choose the number then confirm .
The simplest way to count the heart rate is 220 subtract your age (App will also predict your heart rate
warning data according to your personal information)
5.3Open the "24 hour monitoring" switch, click the health management interface and open "24 hours
monitoring" switch, use all-day heart rate monitoring function ,the band will automatically monitor the heart
rate regularly, and the heart rate data will be uploaded to APP and do the heart rate curve line (you should
wear at least 30 minutes to collect the heart rate data), when you switch off the band, all-day monitoring will
be finished.
6. Alarm/ reminder
6.1 Alarm setting
6.1.1Click the "Alarm / reminder" menu, enter alarm / reminder interface, click anywhere of this area then get
into alarm settings page;
6.1.2 In the "alarm clock time" ,click any area, there will be "Time Settings" interface, in a digital area ,choose
the right time . click “confirm” and set the time successfully.
6.1.3. In the "Alarm clock name", you can customize the alarm name.
6.1.4. For the date in "repetition period " , you can select anyone randomly ,click “confirm” to set the time
successfully.
(open these three Alarms , Cubot V2 will remind :when you close it ,no reminder.
6.2 Sleep preference
6.2.1. Open “sleep preferences” then click anywhere to enter sleep Preferences page,
6.2.2. Choose “fall sleep or wake up”, the interface will pop up "time settings" ,
6.2.3. Slide up and down the digital area then set sleep / wake time, “confirm” means setting successfully.
6.3Call/messages/wechat reminder
6.3.1 Open call/messages/wechat reminder ,When there is calls/messages/wechat messages/,App will
deliver the information
(alarm reminder 、call reminder 、messages reminder 、wechat reminder ;)
Operation reminder :alarm 、sleep preference、call/messages/wechat
Open call
reminder/m
essage
reminder/w
echat
reminder,
app will
deliver
Sedentary
reminder
6.4 Sedentary reminder: open it and set the time to remind. when the time is up ,there will be a sign in
the display of the band. ( there will be no reminder in the period if you walk more than100 steps )
Click anyone and
choose
“alarm/reminder”
click here,and set the
alarm time
click here and
name the alarm
click here to
set what day in
a week
Open “sleep
preference”
and enter
sleep setting
interface
Click “fall asleep” or
“wake up” and set
the sleep time
Time setting box,
slide up and
down to choose
the time of alarm
and
sleep ,confirm it .
click here and
enter
sedentary
reminder
setting box
click here and
enter sedentary
reminder setting
box
slide up and
down to set
how long
for
sedentary
time
slide up and
down to set
sedentary
time period
choose what
day in a week
to remind
Click “ start to jogging” , you begin the
track to sport.
Press this button long press to pause ,you
choose stop or continue. Cilck her to view
this exercise record
Warm tips :
.before using the band ,you need to connect it with APP and calibrate the automatic synchronization of time
and data, otherwise the steps and sleep data will be wrong
.If the APP is unable to search the device after twice search connection, go to the phone settings and ignore
the paired devices and switch on Bluetooth again
.In static state, except for alarm clock ,other reminders will be closed
7.GPS movement
7.1 select "GPS" in the menu bar interface, enter the "running" interface, click "start running", enter the track
interface and start running.
(APP will draw the trajectory based on your line of motion. )
7.2 click the track interface below the "long press pause", you will end or continue. Click on the button , you
can check the exercise time, distance, speed, calories
8. Remote camera
8.1 in the APP menu bar, select remote camera interface, enter the picture page, the mobile phone camera
shooting through the remote control, there will be an icon in display, click the icon to complete shooting.
9 Device management
9.1 Binding /unbinding management
Bind the device (check item4.1 at the third page for details)
9.1.2 Get into the binding device interface, click unbinding it pops up unbinding tips , confirm it to complete
unbinding. When the distance between the band and APP surpass the effective distance, the Bluetooth will
automatically disconnect and show , the band vibrate to remind.
9.2 Intelligent anti –lost
9.2.1 Search for the device: Open the menu bar ,click the device management, enter the device management
interface, select intelligent anti lost, click search device button , the band will vibrate to remind. App will pop
up a notification box
9.2.2 intelligent warning: click intelligent warning , there will be a notification box , open it , and open all items
like “push reminder/ vibration reminder /ring reminder .When APP disconnected with the band ,there will be
warning .
9.3 The RSSI :When you search for the band ,the smaller of RSSI ,the distance is closer.
choose device management choose intelligent anti-lost
search for the device or intelligent alarm switch on intelligent alarm
9.3 Turn over your wrist and brighten the display: open the switch .lift your wrist and keep your palm down ,
you can light up the display.
9.4 units conversion: click the device management interface, start ,you set the metric or
British system , the band will make a synchronous conversion.
Metric system British system
time setting : in the device management interface ,click and make 12 hour setting or 24 hour setting.
12hour setting 24hour setting
10.About
10.1 open the sidebar menu, click the interface;
10.2 click the help, it pops up guidelines, click one by one, users will know the operation instructions
10.3 click "about us" to enter the "us" interface, the user can understand the company's product information.
11.charge for the band
When the band shows a low power icon, indicating that the battery is not enough , you need to connect your
band with the computer or power bank through USB cable , the charging time is about 1.5 hours.