Download - Catalogue No14 Englisch Internet
-
8/9/2019 Catalogue No14 Englisch Internet
1/88
-
8/9/2019 Catalogue No14 Englisch Internet
2/88
-
8/9/2019 Catalogue No14 Englisch Internet
3/88
1
Our solutions for your service
No downtime and that goes for ourstaff as well
Markets, standards and products are changing at an ever
accelerating pace. So that we can stay on the ball to service
your evolving requirements, our staff are always kept up to
date on consulting, development and design practices.
This begins with the initial design phase, and goes rightthrough to the After-Sales Service, as far as maintenance
and modernisation are concerned.
The company also places a great deal of importance on
training young people. The goes for both the commercial
and technical areas. Rounded out by cooperation with
local colleges and universities, this means that there is
always a fresh wind of new ideas blowing through
PLANETA, which helps us to improve our offering to you,
little by little, day by day.
Relationship management for customersand suppliers
We put longterm partnerships and trusting cooperation first.
The continuous exchange of ideas with customers and
suppliers always helps us to improve the service we offer
to the market even more.
Growth is not everything
Our goal is not growth at any price. We wish to remain
the company with the most satisfied and loyalest customers
in the business. This means we value safety, environmental
protection and efficiency very highly. The rest takes care of
itself. This is what we have been working on since 1861,
each and every day.
Paul H. Klawitter Christian P. Klawitter
Matthias B. Klawitter Detlev Middelhauve
-
8/9/2019 Catalogue No14 Englisch Internet
4/88
Note: PLANETA are constantly striving to increase and further improve the product range. Whilst every effort has been made to ensure the accuracy of the specificationsand dimensions included at the time of printing, we are unable to warrant the given information. Designs and specifications are subject to change without notice orobligation. The inclusion of any product does not guarantee the availability of that product in the future. Customers should check both the availability and conformance ofthe product to any critical parameters at the time of ordering!
2014 by PLANETA Form 05/HKE
Page 3-22
Page 23-34
2
bersicht
2
Page 35-443
Page 45-704
Page 71-845
Content of catalogue
Manual lifting and pulling equipmentLever hoists, Manual chain hoists, Grip pullers, Trolleys,
Low headroom trolley hoists, Super-low combined trolley hoists, Beam clamps
EX-proofEX-proof manual chain hoists, EX-proof push and geared trolleys,
Air chain hoists, Air rope hoists, Air supply
Electric hoistsElectric chain hoists GCH, Trolleys for electric hoists, Electric rope hoists
Rope winchesWinch options, Wire ropes, Electric rope winches, Electric rope winch PFW,
Electric rope winch PORTY, Worm gear winch types, Compact rope winches,
Planetary gear winches, Capstans, Manual rope winches
Lifting and transporting accessoriesFlat webbing slings, Round slings, Ratchet lashing, Chain slings,
Magnetic lifter, Plate clamps, Hydraulic pallet truck, Hydraulic jacks,
Mechanical steel jacks
-
8/9/2019 Catalogue No14 Englisch Internet
5/88
SEIT 1861Vorspann fehlt
3
1
-
8/9/2019 Catalogue No14 Englisch Internet
6/88
HebelzugPLANETA hoists
4
Overview of PLANETA manual hoists:
General Information
PLANETA hoists and trolleys are designed to have a long
service life even under the toughest operating conditions and
comply with the machinery directive. Each hoist that leaves our
factory is tested with an appropriate excess load before
delivery. This is certified in an inspection report when a serial
number is assigned, and is enclosed with the item.
When developing our hoists, we do not only place
value on a long service life, but also on absolute
functionality, maximum safety during use and an
appealing design.
We only use galvanised load chains that conform to
DIN EN 817-7-T and that are manufactured in Germany or
Europe, in order to guarantee the highest level of safety.
We guarantee that spare parts will be available for a long time
so that you can work with your hoist for many years.
We are happy to assist you with the recommended annual
inspection of your hoists by passing you on to a designated,
trained PLANETA service partner throughout the entire
federal territory.
Lever hoists
Our WICHTEL, PREMIUM PRO
(for the highest quality), PLANETA-AH
(low weight), PMH and PLX-II
(as a standard model) hoists provide
safe lifting, pulling and securing for
load bearing capacities of up to 9 t.
This is virtually unique in the hoist
market.
Chain hoists
PLANETA pulley hoists are
always used if there is no
power supply (e.g. during
maintenance tasks) or if
acquiring a motor-driven hoist
does not make sense from an
economic perspective, as it
will only be used occasionally.
Our product range includes
the established PLM-II and thePREMIUM PRO for load bearing
capacities of up to 30 t.
Grip puller
PLANETA-Ropemasters for up
to 5400 kg have been used
for many years in structuraland civil engineering,
open line construction and
in forestry to pull and secure
loads.
Beam clamps
The BK beam clamp and the BR
roller clamp are suited as mobile
attachment points on assemblies;
the BR design is also suited as a
trolley for up to 10 t.
The galvanised spindle guarantees
a long service life.
Trolleys
Regardless of whether you choose
the standard PT/GT design, the
strengthened L series or the pulley
hoist-trolley combination for the
lowest construction heights,
PLANETA trolleys provide the
safety, quietness and flexibility tomeet your requirements.
-
8/9/2019 Catalogue No14 Englisch Internet
7/88
-
8/9/2019 Catalogue No14 Englisch Internet
8/88
SeilzuggertLever hoist
6
Safety brakewith two pawls
Drop-forged load hookwith closed and fitting
safety latch
Chromedsteel plate housing
Large, non-sliphand wheel
Extra-secure handle
Chain end piecewith robust nylon design
Integratedchain guide
Reversing leverwith free-
running mode
Tempered andgalvanized load chainacc. DIN EN 818-7-T
Option:Overload protection
-
8/9/2019 Catalogue No14 Englisch Internet
9/88
Seilzuggert
1
7
Lever hoist
Lever hoist PLANETA PREMIUM PROThe next development stage of the reliable PREMIUM lever hoist is the PREMIUM PRO.
Thanks to a significant weight saving, handling is improved. Despite this, the frame has been
strengthened compared to the previous generation.Proven quality also ensures longevity and its design makes it very robust.
Free-running mode
When the selection switch is moved to the middle point, the unladen chain can easily bepulled through the device freely to the required usage length.
This makes tensioning the chain easier.
Load chain
The tempered, galvanised load chain according to DIN EN 818-7-T is supplied with the unit.The standard lifting height is 1.5 m; any length required for higher lifting is possible.
New chain end piece
The robust chain end piece provides additional safety because it cannot be pulled through
the device with the chain.
Protected handle
The ergonomic rubber handle on the end of the lever protects the useragainst injury and is also screwed in place to prevent it slipping.
Technical advantages
Hand lever can be used in any position thanks to the ratchet; safety automatic
mechanical brake; galvanised connecting parts; cast hook clip; large, non-slip andclosed hand wheel; safety chain end piece.
PREMIUM PRO
6 t
Options: Also in -design
With overload protection
PREMIUM PRO1.5 t
TYPE PREMIUM PRO 0,75 1,5 3 6 9
Capacity t
Standard lift m
Min. headroom (A) mm
Lever force daN
Number of chain falls
Chain size mm
B (Dimensions) mm
C mm
D mm
E mm
E1 mm
F mm
G mm
Weight with standard lift kg
Weight for 1m additional lift ing height kg
0.75
1.5
320
22
1
5.6 x 17
115
239
35
35
23
91
146
5.3
0.7
1.5
1.5
360
24
1
7.1 x 21
137
259
42
38
28.5
67
162
8.6
1.1
3
1.5
431
33
1
9 x 27
169
374
48
46
33
98
187
15.2
1.8
6
1.5
500
36
2
9 x 27
238
374
60
59
39
98
187
23
3.6
9
1.5
635
38
3
9 x 27
300
374
70
54
51
98
187
43
5.4
PREMIUM PRO ... with 1,5 m lift Order N o. G10290 G10291 G10292 G10293 G10294
Additional 1m lift Order No. G10086 G10087 G10249 G10254 G10256
0.75 3 t 9 t
-
8/9/2019 Catalogue No14 Englisch Internet
10/88
Only285mm
PMH 500
FlaschenzugLever hoist
8
Mini lever hoist PLANETA PMH
The new PLANETA PMH mini lever hoist impressesdespite its low net weight and minimal size for
professional use in smaller load ranges. It is the ideal
appliance for assembly tasks, in industry, in trade or
in the service area.
It can be used for lifting, pulling, aligning and stretchingin any location and in any direction.
Steel housingThe closed housing is made of steel plates, is extremely
robust and protects the chain drive against dirt.
BrakeThanks to the integrated automatic mechanical brake,
the load is held completely securely in all positions.
Hooks
The carrying and load hooks made of forged steelare fully rotatable and equipped with spring-loaded
safety clips.
Load chainTempered and galvanised load chain according to
DIN EN 818-7-T.
Chain free-running modeBy quickly reversing the selection lever to the middle
setting, the chain can be pulled through freely with
minimal effort.
Hand leverThe rubberised hand lever protects against injuries tohands and enables loads to be lifted and lowered easily.
Storage bag
A practical nylon bag with a belt strap is supplied with
the unit.
TYPE PMH 250 PMH 500
Capacity kg
Standard lift m
Min. headroom (A) mm
Lever force daN
Chain size mm
B (Dimensions) mm
C mm
D mm
E mm
F mm
G mm
H mm
J mm
Weight with standard lift kg
Weight for 1 m add. lifting height kg
250
1.5
245
26
4 x 12
86
170
32
23
97
77
155
79
2.2
0.35
500
1.5
285
26
4 x 12
95
170
36
24
117
80
178
87
3.2
0.35
PMH ... with 1,5 m lift Order No. G10028 G10029
Additional 1 m lift Order No. G10007 G10007
Only245mm
PMH 250
The PMH can be carried easily onthe belt and is always to hand.
-
8/9/2019 Catalogue No14 Englisch Internet
11/88
Preciselychain guide
All external partsgalvanic zinc plated
PLX-II 1.5 t
PLX-II 6 t
Forged safety hookswith accurately fitting
hook clips
0.75 3 t 6 t
PLANETA PLX-II lifting and anchoring device
The PLANETA PLX-II lever hoist is an extremely versatilelifting and anchoring device but is easy to handle.
It is used in the industrial area, in commercial transport, as an
aid during assembly and in construction and the trades.
This device stands out thanks to the high quality of serial production
and its long service life even if operational demands are high.
Simple free-running modeWhen the selection switch is moved to the middle point, the unladen
chain can easily be pulled though the device freely.
New chain end pieceIn the unlikely case of a brake failure, this serves as an additionalsafety device because it cannot be pulled through the device with the
load chain and therefore the load is held reliably.
Connecting partsGalvanised screws, nuts and bolts prevent corrosion, even if
used outdoors.
Rotatable hooksThe forged carrying and load hooks made of heat-treated, tempered
steel are fully rotatable and equipped with spring-loaded, galvanised
hook clips.
TYPE PLX-II ... 0,75 1,5 3 6
Capacity tStandard lift m
Min. headroom (A) mm
Lever force daN
Number of chain falls
Chain size mm
B (Dimensions) mm
C mm
D mm
E mm
E1 mm
F mm
G mm
Weight with standard lift kg
Weight for 1 m add. lifting height kg
0.751.5
340
20
1
6 x 18
135
296
37
26.5
21
150
90
6.5
0.7
1.51.5
360
26
1
7.1 x 21
160
420
37
33
27.5
170
98
10
1.1
31.5
480
38
1
10 x 30
210
420
47
40.5
34
190
105
18.5
2.2
61.5
600
39
2
10 x 30
250
420
69
47
42
190
105
33
4.4
PLX-II... with 1,5 m lift Order No. G10230 G10231 G10232 G10233
Additional 1 m lift Order No. G10009 G10068 G10011 G10012
1
9
Lever hoist
-
8/9/2019 Catalogue No14 Englisch Internet
12/88
-
8/9/2019 Catalogue No14 Englisch Internet
13/88
1
Manual chain hoist
11
Safety brake
The reliable disc brake holds the load in any position after the
lifting or lowing process is complete. Of course, the brake discs
are free of asbestos.
Housing
Even in harsh conditions, dust and dirt have no chance.
The brake and pawls are well protected.
Hooks
Forged carrying and load hooks made of heat-treated, tempered
steel. Cast hook clips that are galvanised and spring-loaded
prevent lifting gear slipping.
Options:
Short model as a combination of chain hoist PREMIUM PROand trolley
Chain bag as an accessory
Also available with GL (Germanischer Lloyd) certification!For shipyards, ships and the chemical industry.
-Design
Safety brake withtwo pawlshold the load in any
position safely!All parts corrosion
protected!
Standard overloadprotection
(over 500 kg)
Chain mounting forlower terminal link
Tempered andgalvanized
load chain acc.DIN EN 818-7-T
Swivelling topand bottomhook
Chrome platedhousing forbest corrosionprotection
High qualityspur gears
Ball bearingmountedsprocket shaft
New casthook clips
-
8/9/2019 Catalogue No14 Englisch Internet
14/88
Seilzuggert
PLANETA PLM-IIThe manual chain hoist PLANETA-PLM-II is our valued price alternative
to many hoists on the market. It complies fully with all relevant
International standards and the CE-regulations for Europe. Its solid design
and easy way of handling made him many friends through the last years.
You will find PLM-II in many kinds of industry, shipyards, on cranes and
also for maintenance.
Safety brake
The large sized safety brake works instantly when operation is stopped,
holding the load safely in any position.
Reliable material
The housings are made of steel, the hook holder and sheeves are of
cast steel. This makes PLM-II robust and sturdy.
Swivel hook
Top and bottom hook are out of tempered high tensile steel. They have
spring loaded, galvanized safety latches with side bending protection.
Luxery rust protectionScrews, nuts, discs, washers, bolts, the complete middle section and
the chains are galvanized to offer a reliable corrosion protection.
All other steel parts are painted or powder-coated
with our best blue finish. Top quality load chain accords to
DIN EN 818-7-T and shines zinc galvanized.
0.5 - 1.5 t 2 - 5 t
Completely zinc platedinternal housing
PLM- II 5 t
PLM- II 1 t
Die-forged safety hookwith locking safety latch
Manual chain hoist
12
TYPE PLM-II... 0,5 1 1,5 2 3 5
Capacity t
Standard lift m
Min. Headroom (A) mm
Hand chain force daN
Hand chain operation length m
Number of Chain falls
Chain size mm
B ( Dimensions) mm
C mm
D mm
E mm
E1 mm
Weight with 3 m lift kg
Weight for 1 m additional lift kg
0.5
3
295
22
2.5
1
5 x 15
122
108
32
18.5
15
8
1.2
1
3
310
30
2.5
1
6 x 18
146
122
38
24.5
19.5
11
1.7
1.5
3
390
34
2.5
1
8 x 24
178
139
42
29.5
22
15
2.3
2
3
410
31
2.5
2
6 x 18
142
122
45
31
26.5
14
2.5
3
3
480
34
2.5
2
8 x 24
178
139
50
33
30
25
3.7
5
3
600
38
2.5
2
10 x 30
210
162
65
45.5
40.5
36
5.3
PLM-II... with 3 m lift Order No. G10235 G10236 G10237 G10238 G10239 G10240
Additional 1 m lift Order No. G10241 G10242 G10243 G10244 G10245 G10246
Chain bag (plastic) up to 3 m lift Order No. H10057 H10057 H10059 H10058
-
8/9/2019 Catalogue No14 Englisch Internet
15/88
13
1
13
Grip puller
Greifzug T508 - T532 in Leichtbauweise
PLANETA Aluminium ROPEMASTERThe housing is made of corrosion resistant lightweight durable
aluminium die cast. This makes the hoist very robust and light
enough to carry it around the job. We supply the puller completewith lever and spare overload protection pins, stowed
conveniently inside the cap of the lever grip or carrying handle.The wire rope, wounded on a reel with hook, is optional.
Versatile
Cranes lift, winches pull, lever hoists span and tie.
A PLANETA - ROPEMASTERis all in one! Three capacities
up to 3.2 tons are offered and if you need more power,then wire rope blocks can multiply the force. See the picture
below how 10 tons can be moved! Please ask us for sheaves.
Simple operation
The unloaded ROPEMASTER allows you to pull the rope throughthe body quickly and to the right distance. Now anchor your
ROPEMASTER safely! The long rope provides lots of play. Put thelong lever pipe on handle 1 for pulling, on handle 2 for lowering.Simply pump the lever. Whenever you stop, the load will be held
safely. Its that easy!
Overload protected
Protection pins in handle 1 break if the load is too high. No more
pulling or lifting is possible then. But the break function is stillactive. Just replace the pin quickly without unloading the puller.
RM08
RM16RM32
2-part lever for RM32
TYPE RM08 RM16 RM32 RM54
Capacity kg
Rope movement per lever action mmLever force at full load daN
Lever length mm
Rope diameter mm
Weight of rope kg/m
Standard rope length m
B (Dimensions) mm
B1 mm
H mm
H1 mm
L mm
Weight without rope kg
Weight with rope and lever kg
800
6024
800
8.5
0.29
20
60
168
240
430
7
16
1600
6030
1200
11
0.53
20
72
97
190
270
545
14
28
3200
4050
1200
16
1
20
91
110
230
330
680
21
52
5400
2585
1200
20
1.65
20
116
150
280
390
830
61
95
RM Puller without rope Order No. G10100 G10101 G10102 G10114
RM Puller with 20 m rope Order No. G10103 G10104 G10105 G10115
Guide roller Order No. D01160 D01162 D01162 D01169
RM08 with rope
10 t
-
8/9/2019 Catalogue No14 Englisch Internet
16/88
-
8/9/2019 Catalogue No14 Englisch Internet
17/88
Seilzuggert
1
Trolleys
15
Push trolley L87-106
Gear type trolley L87-107
L87-Trolleys
L87-trolleys are manufactured in a higher quality for a very rough and unusual use.
The chain hoists PREMIUM PRO, PLM-II and PLX-II of the same capacity as the trolley fit
easily into the lugs with their top hook, but these L87-trolleys are best combined with
PREMIUM PRO. Trolleys have rubber buffers at both sides!
Ball bearings
There are life-time lubricated ball bearings of high quality with seals inside the cast
iron wheels. Their ball shaped surfaces offer a smooth and quiet run on any beam flange
construction.
Wide adjustment for any flange width
Discs of different thicknesses are on the carrying bolts that allow to make the distance
between side plates shorter or longer by exchanging them from outside to inside.
There are two main bolt lengths. The standard bolts are adjustable for normal width.
Bolts of size 2 offer more possibilities up to beam flange sizes on HE-B-beams with
300 mm width. Prefer this when unclear for what kind of work you will use them.
Double safety
Climb stop on both side of the beam flange hinders the trolley to climb up thebeam and prevents from falling down. Right angled side plates work as wheel shaft
breakage protection, falling down protection and beam flange cleaner.
Sturdy side plates
The load is balanced by two carrying bolts on all four wheels because the castle nuts
tie only one side. This gives the bolts a bit of tolerance for movement and equalizes
unproper beam flanges.
More capacities upon request.
L87-106 L87-107
TYPE Push trolley L87-106...
TYPE Gear type trolley L87-107...
0,5
0,5
1
1
2
2
3
3
5
5
10
16
20
Capacity t
Flange width M min. - max. L87-106 and 107 mm
Min. curve radius m
Hand chain operation length L87-107 m
A (Dimensions) mm
A1 mm
B mm
C mm
D mm
E mm
H mm
J mm
S mm
F mm
Weight L87-106 kg
Weight L87-107 kg
0.5
50 203
0.8
2.5
286
272
194
158
54
79
75
95
30
2
6
10
1
64 203
0.9
2.5
303
334
236
196
68
95
96
110
38
2
11
14
2
88 203
1
2.5
317
343
268
226
77
108
110
123
38
2
18
22
3
100 203
1.2
2.5
333
357
322
266
100
131
122
144
40
3
30
34.5
5
114 203
1.3
2.5
355
373
362
301
106
145
142
156
42
3
44
47
10
124 203
1.5
2.5
423
442
356
131
176
190
200
45
3
88
16
136 203
3.5
2.5
498
555
498
236
65
3
163
20
136 203
3.5
2.5
501
555
498
233
58
3
165
L87-106 Order No. G20100 G20101 G20102 G20103 G20104 L87-107 w/ 2.5 m operation lengthOrder No. G20105 G20106 G20107 G20108 G20109 G20110 G20176 G20129
Larger flange width min. - max. mm
Order No.
64 305
G20111
64 305
G20112
88 305
G20113
100 305
G20114
114 305
G20115
124 305
G20116
136 305
G20149
136 305
G20139
Add. hand chain operation length/m Order No. G20117 G20117 G20117 G20117 G20117 G20117 G20150 G20117
-
8/9/2019 Catalogue No14 Englisch Internet
18/88
-
8/9/2019 Catalogue No14 Englisch Internet
19/88
HD3N-Trolleys
Zinc plated design
HD3N-trolleys have outstanding corrosion protection.
All steel parts are electrolytically zinc plated. This is a must
in wet rooms and in very aggressive environment.
Larger flange width (size 2 - 4) are optional. Wheels fit flat
and also tapered flanges!
Capacities up to 25 t on request.
HD3N-H-VZ
1m more operation length Order No.
Standard zinc plated (2.5 m total) G20118
TYPE Push trolley HD3N-H-VZ...
TYPE Gear type trolley HD3N-G-VZ...
0,5
1
1
2
2
3,2
3,2
5
5
6,3
6,3
8
8
Capacity t
Maximum weight of hoist kg
Flange width b min. / max. Size 1 mmmin. / max. Size 2 mm
min. / max. Size 3 mm
min. / max. Size 4 mm
Hand chain force daN
Hand chain operation length m
Min. Curve radius m
A ( Dimensions) mm
B mm
C mm
D mm
E mm
F mm
G mm
H mm
L mm
M mm
N mm
O mm
W Size 1 mm
Size 2 mm
Size 3 mm
Size 4 mm
R mm
Weight HD3N-H-VZ kg
Weight HD3N-G-VZ kg
0.5
100
55/102105/152
2.5
1
45
60
15
52
15
45
30
125
150
160
210
75
3
1
120
55/102105/152
156/203
207/254
10
2.5
1.5
60
75
18
60
20
60
30
150
190
65
90
100
170
220
270
325
99
5
6
2
250
74/127127/180
190/243
254/305
16
2.5
1.6
80
100
22
75
27
80
35
195
255
65
90
100
215
265
330
390
123
11
12
3.2
150
90/143149/203
203/254
251/305
25
2.5
2
100
120
25
90
35
100
40
235
300
70
95
100
250
310
360
410
144
18
19
5
300
106/156160/210
210/260
255/305
20
2.5
2.9
125
150
30
117
40
120
60
295
375
100
130
135
275
330
380
425
174
33
35
6.3
200
106/156160/210
210/260
255/305
25
2.5
2.9
125
150
30
117
40
120
60
300
375
100
130
135
275
330
380
425
174
35
36
8
550
Fix
(119 min.)
16
2.5
3.5
160
190
35
145
45
145
80
365
450
115
135
270
b + 150
220
85
90
HD3N-H-VZ Order No. G20230 G20231 G20232 G20233 G20234 G20235 G20236
HD3N-G-VZ with 2.5 m operation length Order No. G20237 G20238 G20239 G20240 G20241 G20242
Larger Flange width size 2 - 4 Order No. G20243 G20244 G20245 G20246 G20247 G20248
Many special version upon request.
NIROSTA - trolleys up to 3 t
Bogie trolleys up to 10 t
Rack gear trolleys up to 12.5 t Person transporting trolleys - acc. EN 1808up to 4 t capacity
HD3N-G-VZ
1
17
Trolleys
-
8/9/2019 Catalogue No14 Englisch Internet
20/88
Low headroom trolley hoist
18
Combined power
Saving headroom
The very best manual chain hoist
PLS PREMIUM and a trolley L87 are put
together in an integrated combination to
save headroom. That means the distance
between load point of hook and bottomof beam flange. This is very important
if rooms are low or space is narrow.
Halls can be build smaller what saves costs.
Or if the clearance in older buildings is
too narrow for standard hoists - this is
the solution!
Advantages of trolley hoist
shortens downtime in ships
enables low cost bridge cranes
labor saving during repair andmaintenance works.
optimal space utilisation
Low headroom trolleyhoist LHT
The close combination of hoist and trolley
with low headroom offers a unit that is
both functional and versatile. There is less
time spent messing with equipment and
money is saved.
The LHT-line uses the quality advantages
of the PREMIUM manual chain hoists
(see also page 10).
The smoothly moving and operation on ball
bearings plus a perfectly finish of surface
protection offers the user an uncomparable
reliability. The standard equipped overload
protection fulfills even the high demands on
ocean going vessels.
Standard version: PREMIUM chain hoist with 3 m lift and
2.5 m hand chain operation length
Available as manual push trolley
(TYPE -H) or geared trolley (TYPE -G)
A contour trolley wheel design provides
maximum beam contact on flat or
tapered beams. Tilting and climbing
protection according CE-regulations are
self-evident.
Options (on request):
Chain case (what is very unusual
for manual chain hoists) for down-
hanging loose chain that may
cause trouble in some cases.
For corrosive environments,
completely zinc plated surfaces
are also available for the trolley
Special non-corrosive and
non-sparking steels for chain
Special options
Special- Ex-protection with bronze partsand galvanizations, chain collector,
overload limiter, beam parking brake.
LHT-H = Chain hoist in push trolley
LHT-G = Chain hoist in gear type trolley
Dimensional drawing LHT-G (with gear type trolley)
0.5 - 3 t 5 t
10 t 15 t
Low headroomtrolley in a specialconstruction withbeam fixing device.It keeps the trolley
in position whileship rolls.
LHT-G 010L
-
8/9/2019 Catalogue No14 Englisch Internet
21/88
TYPE LHT...-H/-G 005L 010L 015L 020L 030L 050L 075L 100L 150L 200L
Capacity t
Standard lift m
Number of chain falls
Chain size mm
Min. headroom (A) mm
Flange width M min.-max. (M) mm
Min. curve radius mDimension H min. LHT-H mm
Dimension H min. LHT-G mm
B mm
C mm
S mm
Z mm
F mm
Weight with 3 m lift LHT-H kg
Weight with 3 m lift LHT-G kg
0.5
3
1
5 x 15
299
50 - 152
0.85
236
272
258
385
30
7.5
3
15
19
1
3
1
6.3 x 19
331
64 - 203
1
303
334
292
451
37
10.5
3
24
28
1.5
3
1
8 x 24
424
88 - 203
1.1
317
343
358
551
38
12
3
46
44
2
3
1
8 x 24
424
88 - 203
1.1
317
343
358
551
38
12
3
46
44
3
3
1
10 x 28
486
100 - 203
1.3
333
356
434
633
40
14
3
61
65
5
3
2
9 x 27
636
114 - 203
1.4
355
373
448
808
42
15
3
86
91
7.5
3
3
9 x 27
760
124 - 203
2
372
416
628
965
45
16
3
130
135
10
3
4
9 x 27
780
124 - 203
2
378
423
636
990
45
17
3
147
153
15
3
6
9 x 27
930
136 - 203
3.5
449
498
757
1130
56
20
3
278
286
20
3
8
9 x 27
965
136 - 203
3.5
449
498
891
1165
58
25
3
331
353
LHT-H with 3 m lift Order No. G20050 G20051 G20052 G20053 G20054 G20055 G20056 G20057 G20058 G20059
Add. lift / m (LHT-H) Order No. G20070 G20071 G20072 G20073 G20074 G20075 G20076 G20077 G20078 G20079
LHT-G with 3 m lift Order No. G20060 G20061 G20062 G20063 G20064 G20065 G20066 G20067 G20068 G20069
Add. lift / m (LHT-G) Order No. G20080 G20081 G20082 G20083 G20084 G20085 G20086 G20087 G20088 G20089
Larger flange min. - max. mm
width (M) Order No.
50 - 203
G20090
64 - 305
G20091
88 - 305
G20092
88 - 305
G20093
100 - 305
G20094
114 - 305
G20095
124 - 305
G20096
124 - 305
G20097
136 - 305
G20098
136 - 305
G20099
Chain bag * Order No. H10057 H10058 H10058 H10059 H10059
* Flange width to be advised with order! The flange width will be fix and is not adjustable afterwards! Data in chart show only a range of recommendation.
TYPECapacity
t
Hand force
daN
Beam *
mm
Min. Headroom
G mm
Weight (kg) Order No.
with 3 m lift
Order No.
Add. lift per mcomplete 3 m Meter lift
PKB 10
PKB 20
PKB 32
PKB 60
PKB100
PKB120
1
23.2
6
10
12
24
33.538
43
40
40
74-300
90-300106-300
119-300
134-300
134-300
125
150170
285
270
270
40
120150
300
400
400
1.7
23
5
11
11
G20260
G20261
G20262
G20263
G20275
G20278
G20264
G20265
G20266
G20267
G20276
G20279
TYPE
Dimensions
Amm
Bmm
Cmm
Emm
Fmm
F1mm
Rmm
Lmm
Nmm
Umm
Omm
nmm
PKB 10
PKB 20
PKB 32
PKB 60
PKB100
PKB120
80
100
125
160
160
160
100
120
150
190
220
220
22
25
30
35
35
35
20
20
26
33
35
35
36
42
48
75
50
50
29
34
39
68
43
43
226
266
310
430
600
600
500
600
685
965
1070
1070
140
145
175
225
223
223
105
150
150
200
196
196
100
135
135
300
300
300
2500
2500
2500
2500
2500
2500
* Chain bag (plastic) up to 3 m lift
1
19
Low headroom trolley hoist
The manual powered PKB is a very
compact lifting equipment that combines
an integrated chain hoist with a gearedtype trolley. The important fact is that the
load hook can be lifted up directly under
the beam flange.
Quality
A solid steel construction with satisfactorily
hoist component.
Standard version
Ball contoured wheels for flat and tapered
beam flanges. High tensile and galvanizedload chain acc. DIN EN 818-7-T. Hand
chain is also galvanized. Standard lift 3 m
and hand chain operating length 2.5 m.
Complete with multi-paged operation and
testing manual.
Special options
Special- -protection with bronze parts
and galvanizations, chain collector,
overload limiter, beam parking brake.
Low headroom trolley hoist
-
8/9/2019 Catalogue No14 Englisch Internet
22/88
SUPER-Low combined trolley hoist
20
Lifting and driving by SUPER-LO HPR
Compact
The manual powered SUPER-LO HPR is a very compact lifting
equipment that combines an integrated chain hoist with a geared
type trolley. The important fact is that the load hook can be lifted
up directly under the beam flange.
No swing of load
This special development of a combined trolley hoist has two lifting
gears, one at each side of the girder. They lift the load fully
synchronized with two parallel operating load chains what hinders
the attached load to swing. It is different from other models on
the market with only one gear and one chain that goes from one
beam side through the suspension device to the other trolley side.
SUPER-LO HPR places your load softly and precisely on the spot.
That is an important advantage in machinery rooms of ships i.e.
during pulling of motor pistons.
Fast
Lifting is done with very little hand force! The gears have a high
ratio. It enables SUPER-LO HPR to be your first choice when only
very little headroom is available and one man shall do the work!
Quality
It is a solid and robust device made from best steel with machined
sprocket wheels, ball bearing wheels and high tensile load chain.
Anti-fall and antirocking systems are included of course.
Standard versionBall contoured wheels for flat and tapered beam flanges!
Standard lift 3 m and hand chain operating length 2.5 m.
Special options
Special- Ex-protection with bronze parts and galvanizations,
chain collector, overload limiter, beam parking brake.
* Flange width to be advised with order! The flange width will be fix and is not adjustable afterwards! Data in chart show only a range of recommendation.
TYPE
HPR...
Capa-city
t
Handforce
daN
Beam (mm) Min.Curveradius
m
Min.Head-roomH mm
Weight (kg) Dimensions Order
No.with
3 m lift
Order
No.add. liftper m
Order
No.Overload
limiterHeight
mmFlange
width* mmCompl.
3 mMeter
liftL
mmP
mmG
mmWmm
Umm
Bmm
Emm
Fmm
010
020
040
050
063
080
100
120
150
180200
240
1
2
4
5
6.3
8
10
12
15
1820
24
28
28
30
38
41
30
37
45
36
4436
45
72
72
102
102
157
157
157
157
180
180180
180
50-300
50-300
82-300
82-300
125-300
125-300
125-300
125-300
125-300
125-300125-300
125-300
4
4
5
5
10
10
10
10
14
1414
14
105
152
175
195
220
245
245
280
300
340340
370
63
70
115
116
260
295
295
305
540
560580
590
4
5
7
7
8
12
12
12
17
1721
21
445
445
487
487
755
755
755
755
937
937937
937
220
220
295
295
490
490
490
490
532
532532
532
134
134
148
148
208
208
208
208
290
290290
290
265+b
265+b
295+b
295+b
320+b
320+b
320+b
320+b
505+b
505+b505+b
505+b
190
190
220
220
350
350
350
350
365
365365
365
70
70
100
100
155
155
155
155
170
170170
170
30
30
30
40
40
50
50
58
58
7575
80
85
85
139
174
174
174
174
192
192
192192
G20200
G20201
G20202
G20203
G20204
G20205
G20206
G20207
G20208
G20209G20210
G20211
G20212
G20213
G20214
G20215
G20216
G20217
G20218
G20219
G20220
G20221G20222
G20223
G20224
G20224
G20224
G20225
G20225
G20225
G20225
G20226
G20226
G20226G20226
G20226
-
8/9/2019 Catalogue No14 Englisch Internet
23/88
Kurze Kombikatze
21
Beam clamp and trolley
1
TYPE BR... 10 20 30 50
Capacity t
Grip range min. mm
Grip range max. mm
Curve radius m
B min. (Dimensions) mm
D max. mm
E max. mm
J mm
Weight kg
1
64
203
1.1
105
324
340
174
7
2
76
203
1.3
111
387
340
174
20
3
76
203
1.4
127
438
345
280
32
5
100
305
1.5
135
528
465
345
53
BR Order No. F00042 F00036 F00037 F00039
TYPE BK... 10 20 30 50 100
Capacity t
Grip range A min. mm
Grip range A max. mm
B min. (Dimensions) mm
B max. mm
C mm
D mm
E mm
F min. mm
F max. mm
G min. mm
H mm
Weight kg
1
75
230
180
375
80
5
220
102
160
29
20
4
2
75
230
180
375
90
5
220
102
160
28
22
5
3
80
320
220
498
117
8
271
168
240
60
24
9
5
90
320
220
498
127
10
271
168
240
57
30
11
10
90
320
250
514
139
16
280
172
242
55
40
18
BK Order No. F00031 F00032 F00033 F00034 F00035
PLANETA Beam clamp BK
Type BK
Type BR
Mobile attachment device
The girder clamp BK is a simple and safe
load attachment tool. Its easy two-stepoperation makes it ideal for urgent tasks
and assembly jobs. Twist and open the
spindle to the width of the beam flange, pushover the flange and close tightly. The clamp
can also be used for the lifting and transfer
of steel beams and as a pulling clamp.
See the picture! So they are the idealtools for erection and installation works as
they fit any beam type. Rapid preparations
are possible for the lifting equipment thatsaves your time and money.
No more improvised attachment points!
Get safer and reliable with BK!
FeaturesThe frame of the Beam Clamp is madefrom solid steel plates and the spindle is
made from high tensile galvanized steel that
normally forgives a strong tightening.
PLANETA Trolley BR
Trolley BR = clamp on wheels
The grip trolley type BR with its integratedpush trolley is used as a helper for all kind
of mounting, assembly and erection work.
While the clamp BK is fixed at one place,
this attachment point for hoists can travelalong the beam. The system works with
the same concept of our PTM trolley with
the added bonus, that it can be moved fromone beam to another by a simple and easy
twist of the spindle. When it is installed on
the next beam, a crowned counter nut locks
the spindle. Any beam profile type like INP,
HE and HE-B can be served. The mechani-cally machined steel rollers and the closed
ball bearings are permanently lubricated.The spindle is protected against corrosion
by zinc galvanization.
-
8/9/2019 Catalogue No14 Englisch Internet
24/88
Manual lifting applications
22
-
8/9/2019 Catalogue No14 Englisch Internet
25/88
23
2
-
8/9/2019 Catalogue No14 Englisch Internet
26/88
24
Explosion protection informationAccording to ATEX Directive 95 (Directive 94/9/EC), as of
01/07/2003, manufacturers are obligated to produce hoists
in accordance with the applicable rules, standards and
regulations for explosion-protected operating materials,
classified by Ex class and identified accordingly.
The customer must specify either a classificationor an Ex zone.
When we have received this information, we can present you
with a suitable quotation for the hoist you are interested in.
Here is an overview of the classification of explosion-protected
operating materials according to Directive 94/9/EC, to serve
as a guide. The standards, regulations and directives of the
appropriate authority, e.g. chemicals industry associations,
regarding the use of equipment in areas at risk of explosion,
must be observed by the owner during installation, assembly and
operation of >> EX-protected hoists T2
--------------------------------- >T3
------------------------------------------------->T4
----------------------------------------------------------------- >T5
--------------------------------------------------------------------------------- >T6
24
Explosion protection
-
8/9/2019 Catalogue No14 Englisch Internet
27/88
-
8/9/2019 Catalogue No14 Englisch Internet
28/88
26
-proof manual chain hoists
PLS EX
PLS PREMIUM with EX-protectionThe PLS PREMIUM-EX gets a very special surface treatment and has
some changes in design that allows you to use the manual chain hoist
in explosion hazardous areas. It accords to EC-guide lines 94/9/EG
(ATEX-standards).
Three explosion clases are specified. We offer the versions
Basic, Medium and High. Please ask us for more detailedinformations in case of doubts.
All around galvanization and chromatation
Mud and dirt cannot harm this hoist! This protection begins with self-
locking galvanized castle nuts, goes over bronze wheels and rustfree
chains and ends with fully chromated housing parts. Overload protection
in 0.5 t capacity hoist and bigger, supplied with ATEX-Certificate!
1 m more operation length Capacity Order No.
Hand chain Basic/Medium
Hand chain High
0.5 - 10 t
0.5 - 10 t
G50032
G50033
0.25 3 t 5 t 10 t
TYPE PLS-EX... PLS PREMIUM with EX-protection Versions Basic/Medium/High
Capacity Basic/Medium t
Capacity High t
0.25
0.25
0.5
0.5
1
1
1.5
1.25
2
1.25
3
2
5
3.2
10
6.4
Hand chain force daN
Hand chain operation length m
Number of chain falls
Chain size mm
Min. Headroom (A) mm
B (Dimensions) mm
C mm
D mm
E mmN m
F mm
F1 mm
Weight with standard lift kg
Weight per m additional lift kg
12
2.5
1
4 x 12
270
47
69
52
652.5
30
20
6
1
25
2.5
1
5 x 15
350
49
89
50
962.5
30
23
10
1.2
28
2.5
1
6.3 x 19
383
59
95
63
982.5
40
27
12
1.5
31
2.5
1
7.1 x 21
442
76
100
75
1072.5
45
33
17
1.7
29
2.5
1
8 x 24
485
77
100
87
1152.5
50
35
19
2
37
2.5
1
10 x 28
554
85
120
105
1502.5
55
39
35
2.8
37
2.5
2
9 x 27
688
89
100
90
1602.5
65
45
41
3
38
2.5
4
9 x 27
765
89
100
150
3102.5
75
54
78
4.2
Version Basic:
PLS-EX with 3 m liftOrder No. G50000 G50001 G50002 G50003 G50004 G50005 G50006 G50007
Version Medium:
PLS-EX mit 3 m liftOrder No. G50008 G50009 G50010 G50011 G50012 G50013 G50014 G50015
Add. lifting height per m
Basic / MediumOrder No. G10048 G10049 G10050 G10051 G10052 G10053 G10054 G10055
Version High:
PLS-EX with 3 m lift Order No. G50016 G50017 G50018 G50019 G50020 G50021 G50022 G50023
Add. lifting height per m
HighOrder No. G50024 G50025 G50026 G50027 G50028 G50029 G50030 G50031
Chain bag up to 3 m lift* Order No. H10057 H10057 H10058 H10058 H10059 H10059
* Chain bag (plastic) up to 3 m lift. Chain bag up 6 t (steel plate) on request.
-
8/9/2019 Catalogue No14 Englisch Internet
29/88
27
-proof applications
2
-
8/9/2019 Catalogue No14 Englisch Internet
30/88
28
-proof trolleys
L87-Trolleys
L87-trolleys are manufactured in a higher quality for a very
rough and unusual use. The trolleys have outstanding corrosion
protection. All steel parts are electrolytically zinc plated.
The chain hoists PLS PREMIUM-EX of the same capacity as
the trolley fits easily into the lugs with their top hook.
Trolleys have rubber buffers at both sides!
Ball bearings
There are life-time lubricated ball bearings of high quality with
seals inside the cast iron wheels. Their ball shaped surfaces offer
a smooth and quiet run on any beam flange construction.
Wide adjustment for any flange width
Discs of different thicknesses are on the carrying bolts that
allow to make the distance between side plates shorter or
longer by exchanging them from outside to inside.There are two main bolt lengths. The standard bolts are
adjustable for normal width. Bolts of size 2 offer more
possibilities up to beam flange sizes on HE-B-beams with
300 mm width. Prefer this when unclear for what kind of work
you will use them.
Double safety
Climb stop on both side of the beam flange hinders the trolley
to climb up the beam and prevents from falling down.
Right angled side plates work as wheel shaft breakage
protection, falling down protection and beam flange cleaner.
Sturdy side plates
The load is balanced by two carrying bolts on all four
wheels because the castle nuts tie only one side.
This gives the bolts a bit of tolerance for movement and
equalizes unproper beam flanges.
EX-protection version
Trolleys for use in environments with explosion danger
(so-called ex-proof areas) are equipped with special treated
wheels and sparkfree hand chains for EX-areas up to
Zone 1 II 2 G IIC T4. The trolleys accord to EC-Machine
Directive 94/4/EG (Atex-guide lines).
TYPE Gear type trolley L87-107-EX... 0,5 1 2 3 5
Capacity tFlange width M min. - max. mm
Min. curve radius m
Hand chain operation length L87-107 m
A (Dimensions) mm
A1 mm
B mm
C mm
H mm
S mm
F mm
Weight L87-107-EX kg
0.550 203
0.8
2.5
286
272
194
158
75
30
2
10
164 203
0.9
2.5
303
334
236
196
96
38
2
14
288 203
1
2.5
317
343
268
226
110
38
2
22
3100 203
1.2
2.5
333
357
322
266
122
40
3
34.5
5114 203
1.3
2.5
355
373
362
301
142
42
3
47
L87-107-EXwith 2.5 m operation length Order No. G20250 G20251 G20252 G20253 G20254
Larger flange width min. - max. mm
Order No.
64 305
G20111
64 305
G20112
88 305
G20113
100 305
G20114
114 305
G20115
Additional hand chain operation length/m Order No. G20117 G20117 G20117 G20117 G20117
More capacities upon request.
Gear type trolleyL87-107-EX
-
8/9/2019 Catalogue No14 Englisch Internet
31/88
29
-proof trolleys
2
SUPER-Corrosion protection (Basic/Medium)HD3N-trolleys have outstanding corrosion protection. All steel parts are
electrolytically zinc plated. This is a must in wet rooms and in very
aggressive environment. Larger flange width (size 2 - 4) are optional.
Wheels fit flat and also tapered flanges!
Capacities up to 25 t on request.
EX-protection version (High)Trolleys for use in environments with explosion danger (so-called ex-
proof areas) are equipped with bronze wheels and sparkfree hand
chains for EX-areas up to Zone 1 II 2 G IIC T4.
The trolleys accord to EC-Machine Directive 94/4/EG
(Atex-guide lines).
Many special version upon request.
HD3N-H
HD3N-G-EX
Die Laufkatzenpreise verstehen s ich fr Flanschbreitenbere ich 1 bzw. Fes tma ab 8 t. Preise fr Sonderausfhrungen und Opt ionen auf Anf rage.
1m more operation length Order No.
Standard zinc plated (2.5 m total)
V2A (EX) rustfree (2.5 m total)
G20118
G20119
Person transporting
trolleys - acc. EN 1808
up to 4 t capacity Flame zinc plating
NIROSTA - trolleys up to
3 t (non-corrosive steel)
TYPE Push trolley HD3N-H...
TYPE Gear type trolley HD3N-G...
0,5
1
1
2
2
3,2
3,2
5
5
6,3
6,3
8
8
10
10
12,5
12,5
Capacity t
Maximum weight of hoist kg
Flange width b min. / max. Size 1 mm
min. / max. Size 2 mm
min. / max. Size 3 mm
min. / max. Size 4 mm
Hand chain force daN
Hand chain operation length m
Min. Curve radius m
A (Dimensions) mm
B mm
C mm
D mm
E mm
F mm
G mm
H mm
L mm
M mm
N mm
O mmW Size 1 mm
Size 2 mm
Size 3 mm
Size 4 mm
R mm
Weight HD3N-H kg
Weight HD3N-G kg
0.5
100
55/102
105/152
2.5
1
45
60
15
52
15
45
30
125
150
160
210
75
3
1
120
55/102
105/152
156/203
207/254
10
2.5
1.5
60
75
18
60
20
60
30
150
190
65
90
100170
220
270
325
99
5
6
2
250
74/127
127/180
190/243
254/305
16
2.5
1.6
80
100
22
75
27
80
35
195
255
65
90
100215
265
330
390
123
11
12
3.2
150
90/143
149/203
203/254
251/305
20
2.5
2
100
120
25
90
35
100
40
235
300
70
95
100250
310
360
410
144
18
19
5
300
106/156
160/210
210/260
255/305
20
2.5
2.9
125
150
30
117
40
120
60
295
375
100
130
135275
330
380
425
174
33
35
6.3
200
106/156
160/210
210/260
255/305
25
2.5
2.9
125
150
30
117
40
120
60
300
375
100
130
135275
330
380
425
174
35
36
8
550
Fix
(119 min.)
16
2.5
3.5
160
190
35
145
45
145
80
365
450
115
135
270
b + 150
220
85
90
10
600
Fix
(131 min.)
19
2.5
3.5
160
190
35
145
45
145
80
370
450
115
135
270
b + 150
220
90
95
12.5
150
Fix
(143 min.)
23
2.5
3.5
160
190
35
145
45
145
80
375
450
115
135
270
b + 150
220
95
100
Version Basic/Medium
HD3N-H Order No. G20120 G20121 G20122 G20123 G20124 G20125 G20126 G20127 G20128
Version High
HD3N-H Order No. G20130 G20131 G20132 G20133 G20134 G20135 G20136 G20137 G20138
Version Basic/Medium
HD3N-G with 2.5 m operation lengthOrder No. G20141 G20142 G20143 G20144 G20145 G20146 G20147 G20148
Version High
HD3N-G with 2.5 m operation lengthOrder No. G20151 G20152 G20153 G20154 G20155 G20156 G20157 G20158
Larger Flange width size 2 - 4 Order No. G20160 G20161 G20162 G20163 G20164 G20165
Flame zinc plating Order No. G20170 G20171 G20172 G20173 G20174 G20175 G20179 G20177 G20178
HD3N-G
-
8/9/2019 Catalogue No14 Englisch Internet
32/88
Air chain hoists
30
Pneumatic air chainhoist LIFTMASTER TCR
The air chain hoist, why?
A hoist cannot be selected solely on
the basis of its lifting capacity. Ease of
operation, environment, intended use,
frequency of use and degree of speedcontrol are important factors that
need to be considered. The driving
force behind increased use of the LIFT-
MASTER in the industrial market place
is that a growing number of industries
are simply finding the many inherent
advantages of the LIFTMASTER.
Environment
The air chain hoist LIFTMASTER can
be operated in explosive atmospheres
and corrosive environments, becausethe air motor is inherently spark
resistant and also extremely resistant
to adverse external conditions.
Reliable, trouble free
Overloading will not damage the
motor because there is an automatic
switch-off over 1 t capacity. Whether
you are faced with constant stop-start
or continuous operation, you can
expect reliable performance.
Variable speed control
Infinitely variable speed control allows
for accurate and precise load position-
ing. You can inch loads into position or
increase the speed when accuracy is of
less importance.
Smooth starts & stops
Important for operator safety as
well as for reducing parts wear and
maintenance. Smoother operation leads
to less vibration, less stress on partsand a longer unit life.
Compact & lightweight
Small external dimensions and a light-
weight construction make the LIFT-
MASTER hoist ideal for close head room
situations and temporary installations.
Very economical
Approximately 1/3 of the cost of a wire-
rope hoist of the same capacity with
same features.Standard
Height of lift 3 m, Control length 2 m,
use up to EX-Zone IIA 3 GD c T4/T5/T6.
TCR 3000PwithPendant control
TCR 1000C2withRope control
Chain bag up 6 t (steel plate) on request.
In compliance with EX-Zone - ClassesEN 50 014 and newest EC-MachineryDirective 94/4/EG (ATEX- guide lines).
TYPE Order No.
Add. control length rope control / m
Add. control length pendant control / m
H10042
H10043
Pneumatic-Special-Oil Order No.
Content: 2.5 Liter H20566
TYPE LIFTMASTER TCR... 250C/P 500C/P 1000C2/P 1000C/P 2000C2/P 3000C/P
Capacity (Air pressure 6 bar - 1Bm) t
Lifting speed without load m/min
Lifting speed with full load m/min
Lowering speed without load m/min
Lowering speed with full load m/min
Air consumption with fu ll load l/sec
Number of chain falls
Air inlet R inch
Chain size (diameter) mm
Weight with standard lift kg
0.25
20.5
10.5
13.4
17.9
25
1
1/2
6.3 x 19.1
31
0.5
20.5
10.5
13.4
17.9
25
1
1/2
6.3 x 19.1
31
1
10.3
5.3
6.7
9
25
2
1/2
6.3 x 19.1
34
1
11.3
6
6.8
10.3
25
1
1/2
7.1 x 21
35
2
5.7
3
3.4
5.2
25
2
1/2
7.1 x 21
40
3
5.4
2.8
3.3
4.6
33
1
1/2
11.2 x 34
69
TCR... with 3m Lift with
rope control Order No. H10001 H10002 H10003 H10004 H10005 H10006
TCR... with 3m Lift with
pendant control Order No. H10015 H10016 H10017 H10018 H10019 H10020
Add. lift per meter Order No. H10029 H10029 H10030 H10031 H10032 H10033
Maintenance unit Order No. H10054 H10054 H10054 H10054 H10054 H10055
Add. air powered trolley DLKOrder No. H10044 H10044 H10044 H10044 H10045 H10046
Chain bag (plastic)
to 3 m lift Order No. H10057 H10057 H10058 H10058 H10058 H10059
TYPE LIFTMASTER TCR... 6-C2/P2 10-C2/P2 12-C4/P4 15-C5/P5 20-C4/P4 25-C2/P2
Capacity (Air pressure 6 bar - 1Bm) t
Lifting speed without load m/min
Lifting speed with full load m/min
Lowering speed without load m/minLowering speed with full load m/min
Air consumption with full load l/sec
Number of chain falls
Air inlet R inch
Chain size (diameter) mm
Weight with standard lift kg
6
2.7
1.4
1.72.3
33
2
1/2
11.2 x 34
90
10
2.2
1.5
1.82.3
90
2
1
16 x 45
190
12
1.4
0.7
0.81.2
33
4
1/2
11.2 x 34
170
15
1.1
0.6
0.70.9
33
5
1/2
11.2 x 34
221
20
1.2
0.8
0.91.2
90
4
1
16 x 45
470
25
0.7
0.5
0.50.7
120
2
1
22 x 66
320
TCR... with 3m Lift with
rope control Order No. H10007 H10008 H10009 H10010 H10011 H10012
TCR... with 3m Lift with
pendant control Order No. H10021 H10022 H10023 H10024 H10025 H10026
Add. lift per meter Order No. H10034 H10035 H10036 H10037 H10038 H10039
Maintenance unit Order No. H10055 H10055 H10055 H10055 H10056 H10056
Add. air powered trolley DLKOrder No. H10047 H10048 H10049 H10049 H10050 H10051
-
8/9/2019 Catalogue No14 Englisch Internet
33/88
31
Air chain hoists
2
Air powered trolley DLK
10 t
25 t
TYPE TCR... A B C D E H
TCR 250 C/P
TCR 500 C/P
TCR 1000 C2/P2
TCR 1000 C/P
TCR 2000 C2/P2
TCR 3000 C/P
342
342
342
342
342
449
156
156
156
156
156
202
149
149
180
157
194
245
52
52
47
40
50
47
29
29
29
29
29
34
462
462
519
466
580
580
TYPE TCR... A B C D E H
TCR 6 C2/P2
TCR 10 C2/P2
TCR 12 C4/P5
TCR 15 C5/P5
TCR 20 C4/P4
TCR 25 C2/P2
449
560
441
441
549
710
202
247
191
191
247
335
275
445
520
480
230
478
63
165
210
210
200
165
42
40
57
83
100
80
690
890
900
900
1350
1440
1- chain fall 2 - chain falls
Air pressure
The LIFTMASTER hoist reaches its
nominated performance data at 6 bar
flowing air pressure. But it can operate
also with only 4 or 5 bar, which decreases
the lifting speed by 20 to 30 percent.
The SWL will still be lifted. The type series
TCR has a wide capacity spectrum from
250 kg up to 100 tons upon request. All
hoists have an excellent relation between
price and performance. They are infinitely
adjustable in lifting and lowering speed
and can work continuously. The pull chain
control is even better in speed regulation
than the push key control because it
works directly on the inside main valve.
The TCR is also avaible with special
chains from sparkproof material and
hooks can be treated with bronze plating.Please ask for our assistance to choose
the correct option.
Air powered trolley
There are air powered and gear type
trolleys available for all capacities of
LIFTMASTER. Please inquire!
Hoists in trolley on request!
Drop forged, high tensileTop Hook made of tempered steel
Rigid, zinc galvanizedHook Safety Latch
Efficient Muffler
Precise Chain Guide with
chain stripperDependable starting
Vane Motor with 7 vanes
Control Valve, for smoothlyadjustable speed control
Robust cast steel Housing
Sprocket wheel with perfectly fittingmilled pockets
Limit Switches for highest andlowest hook position, also controllever for chain control
Round link steel chainacc. DIN EN 818-7-T withGalvanized Protection
Flexible Control hoses
Automatic Disc Brake
Three-stage Planetary Gearing
Emergency-Stop-Button,also for 4-key-control with trolley,according EN 418.
Swivel Hook in axialball bearing
TCR 3000P
-
8/9/2019 Catalogue No14 Englisch Internet
34/88
-
8/9/2019 Catalogue No14 Englisch Internet
35/88
33
Small air rope hoists
2
Air rope hoist LIFTMASTER EHW
Mobile application
The pneumatic rope hoist LIFTMASTER EHW is a practical addition
to the TC chain hoist program. This model is ideal for small load
up to 140 KG that must be moved quite often. All hoists are
equipped with a high-tensile steel rope which is spooled on a drum
inside of the hoist body. Only up to Ex II 2 G D II B T 5 (X).
Two types of control
The EHW types are hand guided and have their control direct
at the hoist body that allows one hand of operator to be free for
other actions. The EHW-R hoists have a separate push key
pendant control with one red emergency shut-off mushroom button
that ensures safety and complies with CE-regulations.
Automatic Brake
All hoists have a fail-safe automatic disc brake which holds the
load in any position even if the air supply fails.
Versatility of Service
These hoist are perfectly used at pack tables, for lifting of barrels,
bundles, parcels, over machine tools in slewing cranes etc.
The hoists switch off automaticaly in highest and lowest hook
position. Interesting is the combination with a pneumatic vacuum
lifter, whereby both units can be served through one common
air line. All hoists have a standard 2-meter rope which fits
onto the drum.
That is sufficient in most cases. However if you need a longer
rope, perhaps to allow a higher suspension of the type EHW-R,
we can extend the rope. But this additional length cannot be
spooled on the drum. The control hoses can be made longer up
to 10 m. The air pressure shall be max. 6.3 bar, but it can drop
to 4 bar and the hoist still lifts its rated capacity, only much
slower.
EHW60/120 EHW60R/120R
EHW120REHW60
TYPE EHW60 EHW60R EHW120 EHW120R
Capacity kgStandard lift m
Number of rope strands
Air pressure bar
Lifting speed with full load 0 - m/min
Air consumption m3/min
Air inlet R inch
Weight with standard lift kg
602
1
6
26
0.9
3/8
9
602
1
6
26
0.9
3/8
10
1202
1
6
16
0.9
3/8
9
1202
1
6
16
0.9
3/8
10
EHW... with standard rope length Order No. H10080 H10083 H10081 H10084
Longer control hoses per meter Order No. H10086 H10086
More capacities on request.
-
8/9/2019 Catalogue No14 Englisch Internet
36/88
34
Air supply
TYPE 1: Spiral hoseBeam length up to 10 m are best to serve with a spiral hose for
air supply. A rope is spanned parallel to the beam between twoholding arms. The spiral hose winds around it. The plastic hose
acts like a spiral spring, gets longer or shorter with the moving
trolley.
Complete set for 3 meter beam drive:Spiral hose with reserve (1.7 x L), twistable connections with male
thread, 2 span arms, wire rope with reserve, 4 rope clamps and
2 span screws. The maintenance unit (filter, lubricator, regulator)shoud be fixed as near as possible to the trolley. Short beams may
have it at the beginning of the beam.
TYPE 2: Drag hosePulling the air hose behind the trolley is the easiest way to bring
air to the hoist. Small plastic trolleys carry the hose in certaindistance behind the trolley. The hose hangs normally one meter
down. So one hose carrier is needed each two meters. The hose is
transparent with a strengthening textile inlet. It stands a pressure up
to 15 bar. Water and oil cannot harm it. Since the trolleys arepushed together when the train comes into end position, the beam
must be a little bit longer.
Complete set
The beside mentioned order number includes all accessory for a
beam length of 3 m. In details: air hose plus 3 meter addition forleading down to the ground where a ball valve cuts air supply off.
Plastic trolleys, end clamp, nipples end other fittings. If the hose
shall be detachable, a quick-acting coupling shall be ordered.
ATTENTION:
Driving through curves need special equipment. Please inquire!
TYPE 3: C-trackA C-track is the most comfortable air supply. The total beam lengthcan be used for driving. This type is mostly used with slewingcranes because the complete length of swing arm is necessary to
drive on. Here the holding arm of C-rack can be fixed easily what is
difficult in opposite under the ceiling in case of a double T-beam.C-tracks are available in lengths of 6 m. They are added with
combiners to longer rails.
Complete set
The beside mentioned order number includes all accessory for a
beam length of 3 m. In details: air hose plus 3 meter addition for
leading down to the ground, where a ball valve cuts air supply off.Three holding arms, connection clamps, screws, C-rail holder,
C-rails in 2 m length, C-rail connectors, first trolley leading arm,
hose clamps, fittings.
All metal parts are zinc plated.Remind when ordering that hoses have the correct diameter.
Choose one size bigger in case that hoses are longer than 10 m.
The longer the hose, the deeper the pressure drops.Hoists need minimum 5 bar FLOWING pressure during operation.
Each quick-acting coupling, every pipe bow, all valves etc.
reduce flow pressure. Even when static pressure is 6 bar before
operation, the flow pressure is a result of air friction in hoses and
fittings and other users of the same ring pipe line. Keep an eyeon your pressure gauge! A bad performance of air hoist is for
99% a result of wrong air supply and too low flow pressure.
TYPE 1
TYPE 2
TYPE 3
Ball valve Quick-action coupling
TYPE 1 2 3
Standard driving length m
Complete 1/2 inch Order No.
3
H10180
3
H10181
3
H101821 m more rail length 1/2 inch Order No. H10183 H10184 H10185
Complete 3/4 inch Order No. H10186 H10187 H10188
1 m more rail length 3/4 inch Order No. H10189 H10190 H10191
Complete 1 inch Order No. H10193 H10194
1 m more rail length 1 inch Order No. H10196 H10197
Special equipment:
Quick-action coupling 1/2 inch Order No. H10199 H10200
Quick-action coupling 3/4 inch Order No. H10202 H10203
Quick-action coupling 1 inch Order No. H10205 H10206
Air hose 1/2 inch - 6 bar Order No. H10208 H10209
Air hose 3/4 inch - 6 bar Order No. H10211 H10212
Air hose 1 inch - 6 bar Order No. H10214 H10215
Air hose 11/4 inch - 6 bar Order No. H10217 H10218
Air hose 11/2 inch - 6 bar Order No. H10220 H10221
-
8/9/2019 Catalogue No14 Englisch Internet
37/88
35
3
-
8/9/2019 Catalogue No14 Englisch Internet
38/88
36
Electric chain hoist GCH
Brake
Maximum safety(construction:
brake after
slipping clutch)
New advanced
brake design
Allows lifting
above persons
according FEM 9.756
Maintenance free
Transmission
Helical-toothed first and
second gear step
for quiet running
Permanent lubrication
for wear resistant
operation
Chain wheel
Made of hardened steel
With additional chain pockets
(4mm): hence quiet running and
improved running properties
With double bearing construction
Geared limit switch
Geared limit switch for highest and lowesthook position. Easy to adjust in exact
position with milled setting ring
Exact positioning
Lifting heights up to 220 m
Accuracy for repetition assured
Chain guidance
2-part construction to optimize
maintenance
Reinforced plastic
material highly
wear resistant
Safe operation
jamming excluded
Slipping clutch
Simple and precise adjustment
Maintenance free and highly
resistant to wear
Ease of servicing
thanks to comfortable
access
Control switch
With built-in support wire
as a standard
2-buttons: design especially
ergonomic
Emergency stop as a standard Protection: IP 65 to DIN 40050
Electric chain hoist PLANETA-GCH
Simple Reliable Safe
Compact design
Robust construction
Simple maintenance
Fast availability
Moderntechnology
Highest quality
Extraordinarylong duty life
Maximum safety
-
8/9/2019 Catalogue No14 Englisch Internet
39/88
37
Electric chain hoist GCH
3
Entertainment industry
no show for sure!
Climbing and lifting with
PLANETA-GCH-Electric chain hoist
Individually direct control available
Control from point far away
Standard with gear limit switch
2nd brake
According standards like BGV-D8,
BGV-D8 Plus and BGV-C
For applications in theatres,
stages and studios
All in black color available
Synchronic lifting technology
with PLANETA electric
chain hoist
Solution for optimized
handling of exceptional length
and bulky loads
Precise parallel run of two or four
load hooks guaranteed
Load capacity with 2 hooks,
up to 3200 kg
Hook position (height) individually
adjustable by geared limit switch Step less speed control with frequency inverter available
(optional)
Hook distance following needs and further on adjustable
Modular development for use in low rooms
Practicable in fully automatic installations with external controls
Optional with chain oiling system
Flexible hand guide control
Chain Handy with PLANETA-
GCH-Electric chain hoist
Product positioning through toggle switch
in comfortable and efficient way
Allows a fast and reliable movement
of different goods Standard left and right hand operation
Safe lifting up to 250 kg capacity
Step less speed control with frequency
inverter available (optional)
Low headroom version with
PLANETA-GCH-Electric chain hoist
Solution for especially low rooms.
For working areas in all kind of industries
Reduced headroom over clever
chain guidance Hook position individually adjustable by
geared limit switch
Step less speed control with frequency
inverter available (optional)
Hook distance variable by modular
lengthening device
Capacities up to 4000 kg
Designed for use with the complete GCH range
Radio control
69 different frequencies, 433.075 - 434.775 MHz
Emergency stop acc. EN 954-1 category 3
10 push buttons with 2 positions
Housing protection class: IP54
Accu status monitoring
High precise rigid hand
guide control Telescopic
Handy with PLANETA - GCH
electric chain hoist
Exact and accurate positioning
through toggle switch and rigid telescopic
guide system
Allows the controlled and perfected
handling of different (incl. liquids) transport
goods
Standard left and right hand operation
Safe lifting up to 250 kg capacity
Step less speed control with frequency
inverter available (optional)
-
8/9/2019 Catalogue No14 Englisch Internet
40/88
-
8/9/2019 Catalogue No14 Englisch Internet
41/88
39
Electric chain hoist GCH
3
Hook mounting *
for GCH
Order No.
TYPE 250 / TYP 500 H20760
TYPE 1000 H20761
TYPE 1600 / TYP 2000 / TYP 2500 H20762
Options for GCH * Order No.
Motor thermal protection / Klixon 140C H20073
Special motor voltage H20076Special control voltage H20078
CEE-plug with 5m connection cable H20080
Counter of operation hours H20553
Radio remote control for hoist only H20557
Radio remote control for hoist and trolley H20558
Limit switches for electric motor trolley H20559
Rain cover of textile material H20561
Connecting lug GCH 250-2-L87-05 H20162
Connecting lug GCH 250-1-500-1-L87-05 H20163
Connecting lug GCH 500-2-L87-10 H20164
Connecting lug GCH 1000-1-L87-10 H20165
Connecting lug GCH 1000-2-L87-20 H20166
Connecting lug GCH 1600-1-2000-1-L87-20 H20167
Connecting lug GCH 2500-1-L87-30 H20168
Connecting lug GCH 1600-2-2000-2-2500-2-L87-50 H20169
Special options upon request:
Motor driven trolley
Low headroom version
Synchronized hoists
Flexible one-hand-solution
Rust proof electric hoist
Hoists for theatres, stages and studios acc. BGV C1
Electric chain hoists for DUST Ex-areasEx II 3D Ex tc IIIA T130 C Db
Electric hoists and trolleys for 1-Ph/230V (single phase)
Electric hoists for any other voltage
Chain case*
for TYPE
Size of
chain case
Version Order No.
GCH 250
up to 8 m Chain Plastic H20754
up to 16 m Chain Plastic H20755
up to 25 m Chain Textile H20756
GCH 500
up to 6 m Chain Plastic H20754
up to 12 m Chain Plastic H20755
up to 20 m Chain Textile H20756
GCH 1000up to 8 m Chain Plastic H20757
up to 35 m Chain Textile H20758
GCH 1600 up to 20 m Chain Textile H20758
GCH 2000 / 2500 up to 15 m Chain Textile H20758
* Only in connection with electric chain hoist/trolleyMore sizes for higher lifts upon request!
* Only in connection with electric chain hoist/trolley
* Only in connection with electric chain hoist/trolley
Rain coverof textile material
Electric motor trolley
for GCH
Driving speed
m/min
Standard
flange widthmm
Weight
kg
Order No.
EMF 50 * to 1000 kg 12/4 50 - 99 27 H20720
EMF 150 to 2000 kg 12/4 76 - 139 31 H20721
EMF 300 to 4000 kg 12/4 120 - 179 50 H20722
EMF 500 to 5000 kg 12/4 120 - 179 57 H20723
Wider flange width** up to 300 H20724
Manual push trolley for
GCH
Standard
flange width
mm
Weight
kg
Order No.
GHF 500 K to 500 kg 50 - 99 2.5 H20729
EHF 50 * to 1000 kg 50 - 99 7.5 H20730
EHF 150 to 2000 kg 76 - 139 13.5 H20731
EHF 300 to 4000 kg 120 - 179 27.5 H20732
EHF 500 to 5000 kg 120 - 179 27.5 H20733
Wider flange width** up to 300 H20734
* Only in connection with GCH 500/2 ** Only in connection with trol ley
* Only in connection with GCH 500/2 ** Only in connection with trol ley
TYPE
Capacities in kg acc. ISO (FEM)*Lifting
speed with
load
m/min
Number
of
chain
falls
Chain
size
mm
Motor
power
kW
3 x 400 V
50 Hz
(example)
A
Weight
with
3 m lift
kg
Weight
each meter
add. lift
kg
Order No
GCH with
3 m lift
Order No
Add. lift
per m**
M3
(1Bm)
M4
(1Am)
M5
(2m)
M6
(3m)
M7
(4m)
GCH 2000/1N 2000 1600 1250 1000 800 8 1 10 x 28 3.05 7.3 65 2.25 H20706 H20101
GCH 2000/1NF 2000 1600 1250 1000 800 8/2 1 10 x 28 3.05/0.77 8.0/4.5 67 2.25 H20707 H20101
GCH 2000/1SF 1250 1000 800 630 500 12.5/3 1 10 x 28 2.98/0.72 8.0/4.5 67 2.25 H20708 H20101
GCH 2000/2N 4000 3200 2500 2000 1600 4 2 10 x 28 3.05 7.3 76 4.5 H20709 H20102GCH 2000/2NF 4000 3200 2500 2000 1600 4/1 2 10 x 28 3.05/0.77 8.0/4.5 78 4.5 H20710 H20102
GCH 2000/2SF 2500 2000 1600 1250 1000 6.25/1.5 2 10 x 28 2.98/0.72 8.0/4.5 78 4.5 H20711 H20102
GCH 2500/1N 2500 2000 1600 1250 1000 6.4 1 10 x 28 3.05 7.7 65 2.25 H20712 H20103
GCH 2500/1NF 2500 2000 1600 1250 1000 6.4/1.6 1 10 x 28 3.05/0.77 8.2/4.4 67 2.25 H20713 H20103
GCH 2500/1SF 1600 1250 1000 800 630 10/2.5 1 10 x 28 3.05/0.77 8.2/4.4 67 2.25 H20714 H20103
GCH 2500/2N 5000 4000 3200 2500 2000 3.2 2 10 x 28 3.05 7.7 76 4.5 H20715 H20104
GCH 2500/2NF 5000 4000 3200 2500 2000 3.2/0.8 2 10 x 28 3.05/0.77 8.2/4.4 78 4.5 H20716 H20104
GCH 2500/2SF 3200 2500 2000 1600 1250 5/1.25 2 10 x 28 3.05/0.77 8.2/4.4 78 4.5 H20717 H20104
** Load chain and control cable
-
8/9/2019 Catalogue No14 Englisch Internet
42/88
40
Electric chain hoist GCH
Type GCHwith lug eye mounting
A
BNC
D
HK
M
Type GCHwith electric motor trolley
E
J
F L G
TYPE GCH ... 250/1 250/2 500/1 500/2 1000/1 1000/2 1600/1 1600/2 2000/1 2000/2 2500/1 2500/2
A (Dimensions) mm
B mm
C mm
D mm
E mm
F mm
G mm
H mm
J mm
K mm
L mm
M mm
N mm
281
309
246
40
277
250
209
369
418
398
50-99
431
36
281
309
246
40
277
250
209
408
457
398
50-99
470
36
281
309
246
40
277
250
209
377
426
398
50-99
439
36
281
309
246
40
277
250
209
417
466
398
50-99
479
36
367
367
321
52
293
253
211
482
542
565
76-139
553
43
367
367
321
52
293
253
211
556
616
565
76-139
627
43
424
389
345
75
323
259
217
608
637
646
120-179
638
50
424
389
345
75
323
259
217
690
719
646
120-179
720
50
424
389
345
75
323
259
217
608
637
646
120-179
638
50
424
389
345
75
323
259
217
690
719
646
120-179
720
50
424
389
345
75
323
259
249
608
637
646
120-179
638
50
424
389
345
75
323
259
249
690
719
646
120-179
720
50
Electric chain hoist GCHwith electric motor trolley EMF
Electric chainhoist GCH withhook mounting
Electric chain hoist GCHwith push trolley EHF
Double chain fall
Single chain fall
-
8/9/2019 Catalogue No14 Englisch Internet
43/88
-
8/9/2019 Catalogue No14 Englisch Internet
44/88
42
Electric chain hoist / accessories
Trolley buffer assembly
Trolley bufferThe ideal trolley limit stop, suitable for all types of manual trolley,
reel chain trolley and electric trolley up to a maximum load bearing
capacity of 10 t! With just a few simple actions it is clamped to the
required end of the track on a parallel flange carrier section.
In this way it fulfils various functions: Path limit to prevent crashes,
holding hoists in the desired position, securing the trolley againstrolling away inadvertently, absorbing impact energy and more
precise braking.
Trolleybuffer
TYPEBeamwidths
mm
Order No.
Setconsisting of
2 pieces
K1 90 - 300 H20066
Please photocopy, fill in and FAX to us!
Enquiry help for electric hoists1. What tasks will the hoist be used for?
...........................................................................................
...........................................................................................
2. Type of hoist: Electric chain hoist Electric cable hoist
3. How often is the nominal load lifted?
................................. /day ................................. /hour
4. How often is the partial load lifted? ................................. /day
5. How many load cycles per day? ..........................................
6. Distance covered per hoisting cycle:..................................... m
7. Speed:
a) Required main hoisting speed .. .. ... .. ... .. .. ... .. m/min
b) 1 speed
c) 2 speeds
8. Clear height for electric hoist (short model required?): .......... mm
9. Total weight of load to be hoistedincluding load-carrying equipment: ............ kg
10. Lifting height (standard: 3 m): ............ m
11. Mounting height/trolley track height(Floor to bottom edge of carrier) ............. m
12. Operating height (distance from floor oroperating platform to bottom edge of carrier): ............. m