Download - Basic Command Handling

8/4/2019 Basic Command Handling

1/25

BASIC COMMAND HANDLING


2/25

MANAGED OBJECT

A Managed Object is a logical representation of hardware units and

software in the BTS. As we are aware that nothing is visible from BSC

end that means it is necessary to define all hardware unit in as a logical

entity.


3/25

MANAGED OBJECTS

Transceiver Group (TG)Central Function (CF)

Digital Path (DP)

Concentrator (CON)

Transceiver Controller (TRX)Transmitter (TX)

Receiver (RX)

Interface Switch (IS)

Timing Function (TF)Time Slots (TS).


4/25

BASIC COMMANDS


5/25

RADIO CONTROL CELL

RESOURCESRLCRP:CELL=ALL;

RLCRP:CELL=CELL ID;

This command is used to see status of BCCH,CBCH,SDCCH etc

channels


6/25

Radio Control Cell Supervision of

Logical Channels AvailabilityData

RLSLP:CELL=ALL;

RLSLP:CELL=CELL ID;

This command prints out supervision of logical channels availabilitydata for the subcells of the specified cell .


7/25

RADIO X-CEIVER

ADMINISTRATION TG TO

CHANNEL GROUP

RXTCP:MOTY=RXOTG,CELL=CELL ID;

This command show either the channel groups connected to one or

more

TGs, or a list of channel groups connected to all the TGs of the

specified managed object type.

This command will also give a list of connected TG's to a cell

when the cell name is given.


8/25

RADIO X-CEIVER

ADMINISTRATION MANAGED

OBJECT FAULT INFORMATION

RXMFP:MO=RXOCF-;

This command initiates printing of fault information for one or

more managed object instances or all defined managed object

instances of a specified managed object type.


9/25

Radio X-ceiver Administration,

Managed Object Configuration Data

RXCDP:MO=RXOTG-;

This command is used to initiate printing of managed objectconfiguration data for one or more managed object instances.


10/25

RADIO X-CEIVER


OBJECT STATUSRXMSP:MO=MO..;

RXMSP:MOTY=MOTY..;

This command prints the status information for one or more

managed objects or for all defined managed object instances of a

specified managed object type


11/25

RADIO X-CEIVER


OBJECT ALARM SITUATIONSRXASP:MO=MO..;

RXASP:MOTY=MOTY..;

This command initiates printing of all alarm situations currently

outstanding in one or more managed object instances or all defined

managed object instances of a specified managed object type.

If the specified managed object instance or managed

object type is TG, then the alarm situations for the

subordinate objects are also printed.


12/25


Manual Blocking of Managed

Object, Initiate

RXBLI:MO=MO.,SUBORD,FORCE;

This command orders the manual blocking of one or more

managed object instances

If the FORCE parameter is given, the blocking order will beexecuted immediately

If the FORCE parameter is not given, the blocking order will not be

executed immediately


13/25


Manual Blocking of Managed

Object, End

RXBLI:MO=MO.,SUBORD;

This command orders the manual unblocking of one or more MO

instance.


14/25

RADIO CONTROL CELL

STATE

RLSTP:CELL=CELL ID;

RLSTP:CELL=ALL[,STATE=STATE];

The command initiates the answer printout CELL STATUS for

one, several or all internal cells. When parameter STATE is given

with ALL cells, the printout CELL STATUS is only produced for

cells of the specified state.


15/25

Radio Control Cell, State,

ChangeRLSTC:CELL=CELL ID,STATE=ACTIVE;

RLSTC:CELL=CELL ID,STATE=HALTED;

The command is used to change the state of a cell or channel

group.


16/25


17/25

TO FIND DIP ID FROM TG

VALUE

RXAPP:MO=RXOTG-;

RADEP:DEV=;

NTCOP:SNT;


18/25


19/25

RADIO CONTROL

ADMINISTRATION DEVICE

DATA

RADEP:DEV=;

The printout DEVICE DATA IN BSC is received for specified

devices, all devices of a device type, or all devices


20/25

Switching Network Terminal,

Connection Data

NTCOP:SNT;

This command prints the connection data of the SNTs


21/25

Alarm Functions, Alarm List

ALLIP:ACL=acl;

ALLIP:ACL=ALL;

This command prints the entire alarm list or a part of the alarm list.


22/25


23/25


24/25


25/25

Download - Basic Command Handling

Top Related