Download - aya kato artist in residence
S-1
E-1
E-2
S-1
S-2 S-2
D-1
D-2
D-3
Slleping Area
Group seating
Personal seating
Personal seating
Floor planAya Kato Artist in Residence
SectionAya Kato Artist in Residence
S-1
ElevationAya Kato Artist in Residence
E-1
SectionAya Kato Artist in Residence
S-2
ElevationAya Kato Artist in Residence
E-2
Platform
Corrugated cardboarddouble wall
Corrugated cardboardsingle wall
Put together usingtounge and groove
Structural reinforcement
Put together usingtounge and groove
Wall piece will be insert here
Glued with water base, non formaldehyde,
and low VOC
1” Bolts
Cardboardreinforcement
Interlocking Cardboard StructureSectionAya Kato Artist in Residence
S-2
ElevationAya Kato Artist in Residence
E-2
1/4” Bolts
Plyboo edge grain veneer4’ x 8’
1” Acrylic tube
1/4” Foamcore
Hanging system
1/4” Steel bar
Origami WallFolded Bamboo Veneer
The ProjectMerging of the system
freight shipcarbonize installation
trash can
staining
coating
adhesive
Life Cycle AnalysisBamboo veneer-cardboard
Bamboo life cycle analysis
natural formand
harvesting
production products
end useend use
Bamboo material analysis
Natural form of bambooBamboo start as bamboo shots that can fairly quickly to be mature (approximately in 5-7 years). Plyboo bamboo are made with 100% Moso bamboo. They sustainably harvest the bamboo forrest, thus, provid-ing them with FSC approval.
Production
a. TransportationDespite the fast maturity rate of bamboo, Moso bamboo mostly grown in China. Thus, it is require additional energy to transporte it. Bamboo usually transport with fright ship which is more sustainable than other transportation services.
b. ProcessThe next step is actual process called carbonizing to remove moisture and add color for bamboo. This process require a lot of energy because of the heat.
Some of the bamboo also need to be glued together and Plyboo company use non-urea and low formalde-hyde adhesive.
AssemblyBamboo products will be assembled and finished as customer’s desire.
End useBamboo can be refurbished, thus allowing it to be recycled and reuse.Unfortunately, many choose to throw it away and it could safely decomposed
installation
trash can
dyed
coating
adhesive
natural formand
harvesting
production products
end useend use
Carbpard life cycle analysisBamboo material analysis
Natural form of corrugated cardboardCardboards are made out of pine trees pulmp. Pine tree is the most sustainable wood andcardboard pulmps usually came from the brances and other unwanted parts
Production
a. TransportationCardboard cleaning and making cannot be make in small area but could only be done in factory places.
AssemblyFor this project, cardboard is attached to one another with tounge and grove system and some of it require to use glue such as the platform covered.
End useCardboard in good conditin without major unwanted materials can be use recycled and reuse.Unfortunately, many choose to throw it away and it could safely decomposed
The ProjectMerging of the system
freight shipcarbonize installation
trash can
staining
coating
adhesive
Life Cycle AnalysisBamboo veneer-cardboard
Bamboo life cycle analysis
natural formand
harvesting
production products
end useend use
Bamboo material analysis
Natural form of bambooBamboo start as bamboo shots that can fairly quickly to be mature (approximately in 5-7 years). Plyboo bamboo are made with 100% Moso bamboo. They sustainably harvest the bamboo forrest, thus, provid-ing them with FSC approval.
Production
a. TransportationDespite the fast maturity rate of bamboo, Moso bamboo mostly grown in China. Thus, it is require additional energy to transporte it. Bamboo usually transport with fright ship which is more sustainable than other transportation services.
b. ProcessThe next step is actual process called carbonizing to remove moisture and add color for bamboo. This process require a lot of energy because of the heat.
Some of the bamboo also need to be glued together and Plyboo company use non-urea and low formalde-hyde adhesive.
AssemblyBamboo products will be assembled and finished as customer’s desire.
End useBamboo can be refurbished, thus allowing it to be recycled and reuse.Unfortunately, many choose to throw it away and it could safely decomposed
installation
trash can
dyed
coating
adhesive
natural formand
harvesting
production products
end useend use
Carbpard life cycle analysisBamboo material analysis
Natural form of corrugated cardboardCardboards are made out of pine trees pulmp. Pine tree is the most sustainable wood andcardboard pulmps usually came from the brances and other unwanted parts
Production
a. TransportationCardboard cleaning and making cannot be make in small area but could only be done in factory places.
AssemblyFor this project, cardboard is attached to one another with tounge and grove system and some of it require to use glue such as the platform covered.
End useCardboard in good conditin without major unwanted materials can be use recycled and reuse.Unfortunately, many choose to throw it away and it could safely decomposed
washer
2 ply cardboard
1/4” steel bar
DetailsOrigami wall, cardboard platform, and connection
2 ply cardboard
2- 2 ply cardboard1-1 ply cardboard
1/4” steel bar
1/4” steel bar
1/2” acrylic tube
bamboo veneer
