Transcript
Page 1: 6ST - Self-Priming Trash Pump - Cornell Pump Company · 2015. 8. 7. · SELF PRIMING TRASH PUMP 6ST * optional Other material options available Shimless impeller clearance adjustment

Size 6” x 6”Capacities To 1550 GPMTotal Dynamic Heads 124 Ft.Solids Handling 3” DiaRepriming Lifts To 25 Ft.Flanges 6” NPT

or ANSI 125lbImpeller Semi-open, 2 Vane

Trash HandlingApprox. Weight 815lbBearing Housing Separate oil reservoir w/ dual

bearing protectionMounting Options Pedestal Frame Mount, Engine

Mount (SAE#4), Base Mount

PRODUCT CAPABILITIES

MATERIALS OF CONSTRUCTION

SELF PRIMING TRASH PUMP

6ST

*optionalOther material options available

Shimless impeller clearance adjustmentEasily removable coverplateBack pullout rotating assemblyDual protection of bearingsAtmospheric barrier and dual lip sealsVolute passes full solid sizeExclusive rubber lined dual wear platesEasily replaceable suction check valveHeavy duty bearingsHeavy duty castingsSolids handling impellerSelf aligning Silicon-Carbide seal w/ oil lubricationRapid Self-PrimingNo need for discharge check valveOptional casing heater

✔✔✔✔✔✔✔✔✔✔✔✔

✔✔✔

Materials All Iron w/ Ductile IronVolute & Impelleror Hard Iron Fitted*or 316SS Fitted*

Shaft 4130HT Steel or Duplex Stainless Steel*

Bearings Pump End: Ball BearingDrive End: Dual Ball Bearing

Wear Plates Oil resistant, rubber coatedor Stainless Steel*or Hardened Iron*

Gaskets Buna or Viton*Pressure Relief Valve BrassSuction Check Valve Canvas Reinforced

Nitrile Rubber or Viton*Mechanical Seal Self aligning Silicon-Carbide

Seal w. oil lubrication

Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]

geert
Draft
Page 2: 6ST - Self-Priming Trash Pump - Cornell Pump Company · 2015. 8. 7. · SELF PRIMING TRASH PUMP 6ST * optional Other material options available Shimless impeller clearance adjustment

6ST SELF PRIMING TRASH PUMP

19.49

11.00 7.56

.98

10.63 2.76

10.37 10.37

1. OVERALL DIMENSION MAY VARY ± .122. 6" 150# R.F. FLANGES OPTIONAL

NOTE:

KEYWAY.38 x .19

12.99

5.00

1.50

6" NPT DISCHARGECONNECTION

30.12

4 x .69 DIA.HOLE

6" NPT SUCTIONCONNECTION

7.60

2.56

.98

22.36

10.12

22.76

22.768/04/10

SW10698DWG. NO.

JOB NO.

PATT. NO.

CHECKED SCALEDATEDR.

REV. NO. DESCRIPTION DATE BY

SW10698

GH 8/04/10 TO SCALE6ST-F (THREADED)CORNELL

R CORNELL PUMP COMPANY PORTLAND, OREGON

10.6319.49

11.00 7.56

.98

2.76

10.37 10.37

9/28/10

SW10699DWG. NO.

JOB NO.

PATT. NO.

CHECKED SCALEDATEDR.

REV. NO. DESCRIPTION DATE BY

SW10699

GH 8/04/10 TO SCALE6ST-EM-4 (THREADED)CORNELL

R CORNELL PUMP COMPANY PORTLAND, OREGON

KEYWAY.38 x .19

12.99

1.50

27.48

4 x .69 DIA.HOLE

6" NPT SUCTIONCONNECTION

22.36

2.56

.98

7.60

22.76

22.76

10.12

SAE#4 6" NPT DISCHARGECONNECTION30.28

NOTE:1. OVERALL DIMENSION MAY VARY ± .122. 6" 150# R.F. FLANGE OPTIONAL

2.76

10.37 10.37

16.0219.49

11.00 12.95

.98

NOTE:1. OVERALL DIMENSION MAY VARY ± .122. 6" NPT CONNECTION OPTIONAL

DISCHARGEFLANGE

6" 150# R.F.

4 x .69 DIA.HOLE

2.56

12.99

22.36

.98

22.76

22.76

10.12

SUCTIONFLANGE

6" 150# R.F.

KEYWAY.38 x .19

12.99

1.50

32.87

SAE#4

35.51

9/28/10

SW10692DWG. NO.

JOB NO.

PATT. NO.

CHECKED SCALEDATEDR.

REV. NO. DESCRIPTION DATE BY

SW10692

GH 7/30/10 TO SCALE6ST-EM-4 (FLANGE)CORNELL

R CORNELL PUMP COMPANY PORTLAND, OREGON

16.0219.49

11.00 12.95.98

10.37 10.37

2.76

SUCTIONFLANGE

6" 150# R.F.

KEYWAY.38 x .19

12.99

5.00

1.5010.12

22.76

22.76

DISCHARGEFLANGE

6" 150# R.F.

4 x .69 DIA.HOLE

12.99

2.56

.98

22.36

35.51

7/29/10

SW10686DWG. NO.

JOB NO.

PATT. NO.

CHECKED SCALEDATEDR.

REV. NO. DESCRIPTION DATE BY

SW10686

GH 7/29/10 TO SCALE6ST-F (FLANGE)CORNELL

R CORNELL PUMP COMPANY PORTLAND, OREGON1. OVERALL DIMENSION MAY VARY ± .122. 6" NPT CONNECTION OPTIONAL

NOTE:

6ST-F Threaded

6ST-EM Threaded6ST-F Threaded6ST-F Flange

6ST-F Flange 6ST-EM Flange

16.0219.49

11.00 12.95.98

10.37 10.37

2.76

SUCTIONFLANGE

6" 150# R.F.

KEYWAY.38 x .19

12.99

5.00

1.5010.12

22.76

22.76

DISCHARGEFLANGE

6" 150# R.F.

4 x .69 DIA.HOLE

12.99

2.56

.98

22.36

35.51

7/29/10

SW10686DWG. NO.

JOB NO.

PATT. NO.

CHECKED SCALEDATEDR.

REV. NO. DESCRIPTION DATE BY

SW10686

GH 7/29/10 TO SCALE6ST-F (FLANGE)CORNELL

R CORNELL PUMP COMPANY PORTLAND, OREGON1. OVERALL DIMENSION MAY VARY ± .122. 6" NPT CONNECTION OPTIONAL

NOTE:

Other mounting configurations available

Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]


Top Related