6st - self-priming trash pump - cornell pump company · 2015. 8. 7. · self priming trash pump 6st...
TRANSCRIPT
Size 6” x 6”Capacities To 1550 GPMTotal Dynamic Heads 124 Ft.Solids Handling 3” DiaRepriming Lifts To 25 Ft.Flanges 6” NPT
or ANSI 125lbImpeller Semi-open, 2 Vane
Trash HandlingApprox. Weight 815lbBearing Housing Separate oil reservoir w/ dual
bearing protectionMounting Options Pedestal Frame Mount, Engine
Mount (SAE#4), Base Mount
PRODUCT CAPABILITIES
MATERIALS OF CONSTRUCTION
SELF PRIMING TRASH PUMP
6ST
*optionalOther material options available
Shimless impeller clearance adjustmentEasily removable coverplateBack pullout rotating assemblyDual protection of bearingsAtmospheric barrier and dual lip sealsVolute passes full solid sizeExclusive rubber lined dual wear platesEasily replaceable suction check valveHeavy duty bearingsHeavy duty castingsSolids handling impellerSelf aligning Silicon-Carbide seal w/ oil lubricationRapid Self-PrimingNo need for discharge check valveOptional casing heater
✔✔✔✔✔✔✔✔✔✔✔✔
✔✔✔
Materials All Iron w/ Ductile IronVolute & Impelleror Hard Iron Fitted*or 316SS Fitted*
Shaft 4130HT Steel or Duplex Stainless Steel*
Bearings Pump End: Ball BearingDrive End: Dual Ball Bearing
Wear Plates Oil resistant, rubber coatedor Stainless Steel*or Hardened Iron*
Gaskets Buna or Viton*Pressure Relief Valve BrassSuction Check Valve Canvas Reinforced
Nitrile Rubber or Viton*Mechanical Seal Self aligning Silicon-Carbide
Seal w. oil lubrication
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
6ST SELF PRIMING TRASH PUMP
19.49
11.00 7.56
.98
10.63 2.76
10.37 10.37
1. OVERALL DIMENSION MAY VARY ± .122. 6" 150# R.F. FLANGES OPTIONAL
NOTE:
KEYWAY.38 x .19
12.99
5.00
1.50
6" NPT DISCHARGECONNECTION
30.12
4 x .69 DIA.HOLE
6" NPT SUCTIONCONNECTION
7.60
2.56
.98
22.36
10.12
22.76
22.768/04/10
SW10698DWG. NO.
JOB NO.
PATT. NO.
CHECKED SCALEDATEDR.
REV. NO. DESCRIPTION DATE BY
SW10698
GH 8/04/10 TO SCALE6ST-F (THREADED)CORNELL
R CORNELL PUMP COMPANY PORTLAND, OREGON
10.6319.49
11.00 7.56
.98
2.76
10.37 10.37
9/28/10
SW10699DWG. NO.
JOB NO.
PATT. NO.
CHECKED SCALEDATEDR.
REV. NO. DESCRIPTION DATE BY
SW10699
GH 8/04/10 TO SCALE6ST-EM-4 (THREADED)CORNELL
R CORNELL PUMP COMPANY PORTLAND, OREGON
KEYWAY.38 x .19
12.99
1.50
27.48
4 x .69 DIA.HOLE
6" NPT SUCTIONCONNECTION
22.36
2.56
.98
7.60
22.76
22.76
10.12
SAE#4 6" NPT DISCHARGECONNECTION30.28
NOTE:1. OVERALL DIMENSION MAY VARY ± .122. 6" 150# R.F. FLANGE OPTIONAL
2.76
10.37 10.37
16.0219.49
11.00 12.95
.98
NOTE:1. OVERALL DIMENSION MAY VARY ± .122. 6" NPT CONNECTION OPTIONAL
DISCHARGEFLANGE
6" 150# R.F.
4 x .69 DIA.HOLE
2.56
12.99
22.36
.98
22.76
22.76
10.12
SUCTIONFLANGE
6" 150# R.F.
KEYWAY.38 x .19
12.99
1.50
32.87
SAE#4
35.51
9/28/10
SW10692DWG. NO.
JOB NO.
PATT. NO.
CHECKED SCALEDATEDR.
REV. NO. DESCRIPTION DATE BY
SW10692
GH 7/30/10 TO SCALE6ST-EM-4 (FLANGE)CORNELL
R CORNELL PUMP COMPANY PORTLAND, OREGON
16.0219.49
11.00 12.95.98
10.37 10.37
2.76
SUCTIONFLANGE
6" 150# R.F.
KEYWAY.38 x .19
12.99
5.00
1.5010.12
22.76
22.76
DISCHARGEFLANGE
6" 150# R.F.
4 x .69 DIA.HOLE
12.99
2.56
.98
22.36
35.51
7/29/10
SW10686DWG. NO.
JOB NO.
PATT. NO.
CHECKED SCALEDATEDR.
REV. NO. DESCRIPTION DATE BY
SW10686
GH 7/29/10 TO SCALE6ST-F (FLANGE)CORNELL
R CORNELL PUMP COMPANY PORTLAND, OREGON1. OVERALL DIMENSION MAY VARY ± .122. 6" NPT CONNECTION OPTIONAL
NOTE:
6ST-F Threaded
6ST-EM Threaded6ST-F Threaded6ST-F Flange
6ST-F Flange 6ST-EM Flange
16.0219.49
11.00 12.95.98
10.37 10.37
2.76
SUCTIONFLANGE
6" 150# R.F.
KEYWAY.38 x .19
12.99
5.00
1.5010.12
22.76
22.76
DISCHARGEFLANGE
6" 150# R.F.
4 x .69 DIA.HOLE
12.99
2.56
.98
22.36
35.51
7/29/10
SW10686DWG. NO.
JOB NO.
PATT. NO.
CHECKED SCALEDATEDR.
REV. NO. DESCRIPTION DATE BY
SW10686
GH 7/29/10 TO SCALE6ST-F (FLANGE)CORNELL
R CORNELL PUMP COMPANY PORTLAND, OREGON1. OVERALL DIMENSION MAY VARY ± .122. 6" NPT CONNECTION OPTIONAL
NOTE:
Other mounting configurations available
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]