prepare bond - image
TRANSCRIPT
PrePare bond
Isolation adhesives
optraGateĀ®
The gentle solution for a better view
Advantages: ā¢ Efficient treatment and easier
relative isolationā¢ Enlarged operating field and easy
access to cavityā¢ Increased comfort for patientsā¢ Attractive colours for enhanced
patient compliance among children
Further products:
ā¢ OptraDamĀ® Plus
TetricĀ® n-bond Universal
Universal for direct and indirect bonding procedures
Advantages: ā¢ Universal application - for all bonding
procedures and etching techniquesā¢ Predictable results - high bond strength
on wet or over-dried dentinā¢ Universal delivery - available in bottles
and in the convenient VivaPenĀ®
Further products: ā¢ N-Etch
fInIsh maInTaIn
Polishers Care Products
CUre
Curing Lights
fluor Protector n
Superior protection against dental caries and erosion
optraPolĀ®
Simply brilliant ā in just one step
bluephase nĀ®
LED for all curing needs
Advantages: ā¢ All light-curing materials ā
due to PolywaveĀ® LED ā¢ All indications ā
due to continuous operationā¢ All the time ā
due to Click & Cure
Further products: ā¢ Bluephase NĀ® Mā¢ Bluephase NĀ® MC
Advantages: ā¢ Smooth surface finish and
perfect lustre due to diamond particles
ā¢ Quick high-gloss polishing in only one step
ā¢ Multiple use for greater cost-efficiency
Further products: ā¢ AstropolĀ®
Advantages: ā¢ Immediate fluoridation of enamelā¢ Immediately ready for useā¢ High-yield delivery form
Further products: ā¢ ProxytĀ®
bluephase nĀ®
P o l y w a v e Ā®
fILL
flowable Composites sculptable Composites
TetricĀ® n-Ceram bulk fill / TetricĀ® n-flow bulk fill
Advantages: ā¢ Time-saving due to 4 mm bulk-fillingā¢ More esthetic than other bulk-fill composites,
particularly in cases of discoloured tooth structure
Further products: ā¢ TetricĀ® N-Ceramā¢ TetricĀ® N-Flow
* compared to TetricĀ® N-Ceram and TetricĀ® N-Flow.
Save 55% on time* and achieve amazing results
ā¢ Foam pad attachments for non-stick, mark-free contouring
ā¢ Two pad sizes for efficient contouring of direct veneers and large-surface class III and IV restorations
ā¢ Reference scale on the instrument handle for recording the axis alignment and the width of the anterior teeth
ā¢ Optimum working angle for the anterior region
optrasculptĀ® Pad
for anterior teeth
optrasculptĀ® Next Generation
for posterior teethā¢ Three attachment shapes for the professional creation of
sophisticated anatomical tooth structures: ball, pointed tip, chisel
ā¢ Optimum working angle for the posterior regionā¢ Hygienic storage container for easy access to attachments
manual Instruments
54
Suitable for use in diagnostic, preventive and therapeutic dentalprocedures(in particular restorative procedures, cavity preparation,professional tooth cleaning, diagnostic procedures, scaling and rootplaning, tooth whitening, impression taking).
advantages:ā Efficient treatment and more effective relative isolationā Enlarged treatment field and accessibility of the cavityā Comfortable to wear for patients
optraGateĀ®
The latex-free OptraGateĀ® lip and cheek retractor allows thetreatment field to be enlarged effectively and comfortably. OptraGateretracts the lips and cheeks gently and evenly over a large area,allowing a more effective relative isolation of the treatment field.OptraGate is comfortable to wear as it is three-dimensionally flexible.The improved padding of the lip and cheek retractor as well as therecesses to accommodate the upper and lower lip frenulum increasethe patient comfort ā even during longer treatment sessions.
OptraGate is available in two sizes, Junior and Small, and in twoplayful colours, blue and pink. The choice of colours is particularlyinteresting to children and adolescents and contributes to enhancingpatient compliance. Indication:
3 41 2
1 2 43
(Ivoclar Vivadent AG, Liechtenstein)
delivery forms
OptraGateĀ® whiteAssortment 577275
OptraGate Regular, white 40x
OptraGate Small, white 40x
Refill
Regular 80x 590850
Small 80x 590851
Junior 80x 591451
OptraGateĀ® blue and pinkStarter Kit/blue + pink 669087OptraGate Junior, blue 4xOptraGate Junior, pink 4xOptraGate Small, blue 4xOptraGate Small, pink 4x
Assortment Junior/blue + pink 669089OptraGate Junior, blue 20xOptraGate Junior, pink 20xAssortment Small/blue + pink 669089OptraGate Junior, blue 20xOptraGate Junior, pink 20x
optradamĀ® PlusOptraDamĀ® Plus is an anatomically shaped rubber dam for theabsolute isolation of the working field. It offers the clinician increasedvisibility and accessibility. In addition, the device facilitates theevacuation of water spray. OptraDam Plus provides patient comfortand assists in keeping the patientās mouth open due to its three dimensional flexibility.
Indication:Suitable for use in therapeutic dental procedures for which anabsolutely dry and isolated working field is required (e.g. for adhesivecementation, filling therapy and root canal treatments).
advantages:ā Easy application thanks to the integrated frame and pre-printed
arch templateā High patient comfort thanks to the flexible, three-dimensional designā Simultaneous isolation of both arches thanks to the tension-free placement
2 3
1 2 3 4
1
5
4
(Ivoclar Vivadent AG, Liechtenstein)
delivery forms
Assortment 627401
OptraDam Plus Regular 25 x OptraDam Plus Small 25 x
Refill
Regular 50 x 627399
Small 50 x 627400
P r e p a r e āŗ I s o l a t i o n P r e p a r e āŗ I s o l a t i o n
76
TetricĀ® n-bond Universal TetricĀ® N-Bond Universal is a single-component, light-curing adhesivefor direct and indirect bonding procedures that features compatibilitywith all etching techniques: self-etch, selective-enamel-etch and total etch.
Tetric N-Bond Universal showed high bond strength on wet or over-dried dentin.Tetric N-Bond Unive rsal is the universal bonding agent available in the traditional bottle as well as the unique VivaPenĀ® delivery for fast and convenient direct intra-oral application with minimal waste to optimize cost-effectiveness.
Indications:ā Direct-placed light-curing composite and compomer restorations.ā Core build-ups with light-, self- and dual-curing composites.ā Adhesive cementation of indirect restorations with light- and dual-
curing luting composites with light-activation or in the self-curing mode.
ā Intraoral repair of fractured composite and compomer restorations.ā Desensitization of hypersensitive cervical areas.ā Sealing of prepared tooth surfaces before temporary / permanent
cementation of indirect restorations (e.g. Dual-Bonding Technique).
advantages:ā Universal application ā For direct and indirect bonding procedures
and compatibility with all etching techniquesā Predictable results ā High bond strength on wet or over-dried
dentin ā Universal delivery ā Available in bottles and the convenient VivaPen
Tetric n-bondĀ® Tetric N-Bond is a light-curing, nano-optimized single-component bonding agent for enamel and dentin bonding in combination with the total-etch technique.
Indications:ā Adhesive for direct, light-curing and dual-curing composite and
compomer restorationsā Adhesive for indirect all-ceramic and composite restorations (inlays,
onlays, veneers)
advantages:ā Integrated nano-fillers for homogeneous layer formation and pene-
tration into dentinal tubules, which leads to improved adhesion to the tooth structure and fewer postoperative sensitivities
ā Ethanol-based for easy application in one layer and improved stabi-lity because there is no premature evaporation as with acetone-based adhesives
ā Consistently high bond strength for clinical successā Technique tolerant ā Good wetting of dry & moist surfacesā Storage at room temperature
delivery forms
Refill Bottle 1 x 6 g 603936
Refill VivaPen 1 x 2 ml 613756
var. accessories
delivery forms
VivaPenĀ®Refill 1 x 2 ml 668222
Refill with snap-on cannulas 1 x 2 ml/ 40 674175
var. accessories
Starter Kit 1 x 0.5ml 668223
var. accessories
Refill VivaPenĀ® snap-on cannulas 100x 627178
Refill VivaPenĀ® snap-on cannulas 300x 627161
Refill VivaPenĀ® protective sleeves 300x 627492
BottleRefill 1 x 6 g 668221
Te-econom bondĀ® Te-Econom Bond is a single-component bonding agent for enamel and dentin bonding in conjunction with the total-etch technique.
Indication:ā Direct light-curing restorations
advantages:ā One-bottle, one-layer adhesiveā High bond strengthsā Minimal evaporation of solvent (alcohol)ā Storage at room temperature
delivery forms
Refill Bottle 1 x 5 g 611129
heliobondHeliobond is a light-curing single-component bonding agent to optimize enamel etching with all light-curing restorative materials.
Indications:ā Adhesive for enamel bondingā Together with Syntac also dentin bonding agentā Cementation of tooth jewelleryā Transparent sealing of fissures and restorationsā As a bonding layer for the reapair of composite, crown and bridge
restorations
advantages:ā For optimum marginal seal between tooth and composite. Applied
in conjunction with the enamel etch techniqueā Storage at room temperature
delivery forms
Refill 1 x 11 g 532906
Refill 1 x 6 g 532907
n-etchPhosphoric acid gel (37%) for enamel etching and dentin conditioning.
Indications:N-Etch is used in the total-etch-technique in conjunction with adhesives, composites, luting materials and fissure sealants.
advantages:ā Optimal partner for TetricĀ® N-Bondā Good etching effect on enamel and dentinā Broad indication spectrum
delivery forms
Jumbo 1 x 30 g / 1 x 2 g 635408
N-Etch Jumbo, N-Etch, var. accessories
Refill N-Etch 2 x 2 g 630210
Indication:Eco-Etch is used in the total-etch technique in combination with Te-Econom Bond.
delivery forms
Refill 2 x 2 g 574151
eco-etchĀ®
Phosphoric acid gel.
B o n d āŗ A d h e s i v e s B o n d āŗ A d h e s i v e s
98
Tetric n-CeramĀ® Tetric N-CeramĀ® is a light-curing, radiopaque nano-hybrid composite for restorative treatment. Available in syringes and cavifils.
Indications:ā Universal use ā for anterior and posterior restorations
advantages:ā Excellent radiopacity ā Good polishabilityā Nano-fillers complete the finely tuned filler technology ā Nano-colour pigments are responsible for the materialās unique
chameleon effectā The nano-modifier ensures optimum stability and excellent
sculptabilityā The material does not stick to the instruments
shades:Enamel shades: A1, A2, A3, A3.5, A4, B2, B3, C2, C3, D3Dentin shades: A3.5 Dentin, B2 DentinBleach shades: Bleach I, Bleach L, Bleach M Highly translucent Incisal shade: T
delivery forms
SyringesIntro Pack 665159
Tetric N-Ceram 1 x A1, 1 x A2, 1 x A3, 1 x B2 1 x 3.5 g each Tetric N-Bond 1 x 6 g N-Etch 1 x 2 gvar. accessories
Intro Pack 604024
Tetric N-Ceram 1 x A2, 1 x A3, 1 x A3.5, 1 x B2 1 x 3.5 g each Tetric N-Bond 1 x 6 g N-Etch 1 x 2 gvar. accessories
Intro Pack 668498
Tetric N-Ceram 1 x A1, 1 x A2, 1 x A3, 1 x B2 1 x 3.5 g eachTetric N-Bond Universal 1x 0.5 mlN-Etch 1 x 2 g var. accessories
Intro Pack 668499
Tetric N-Ceram 1 x A1, 1 x A2, 1 x A3, 1 x B2 1 x 3.5 g eachTetric N-Bond Universal 1x 3 gN-Etch 1 x 2 gvar. accessories
Refill 1 x 3.5 g See p. 8
1 syringe, 3.5 g (16 shades)
CavifilsRefill 10 x 0.25 g See p. 8
10 Cavifils, 0.25 g each (16 shades)
Shade Guide 1 x 604023
F i l l āŗ S c u l p t a b l e C o m p o s i t e s
Tetric n-CeramĀ® bulk fill Tetric N-CeramĀ® Bulk Fill is the efficient, radiopaque 4-mm composite for direct restorative procedures in the posterior region.
Indications:ā Restoration of deciduous teethā Restorations in the posterior region (Classes I and II)ā Class-V restorations (cervical caries, root erosions, wedge-shaped
defects)ā Extended fissure sealing in molars and premolarsā Reconstructive build-ups
advantages:ā Can be placed in increments of up to 4 mm due to IvocerinĀ®, the
patented light initiatorā Low shrinkage and shrinkage stress due to the shrinkage stress
relieverā Short curing time of only 10s (at a light intensity of ā„ 1.000 mW/cm2)
ā Esthetic 4-mm fillings due to the enamel-like translucency of 15%ā Smooth consistency, which ensures easy adaptation to the cavity-
walls
shades:Universal shades: IVA, IVB, IVW
delivery forms
SyringesSystem Kit 647634
Tetric N-Ceram Bulk Fill 2 x IVA, 1 x IVB, 1 x IVW 4 x 3.5 g eachTetric N-Bond 1 x 6 gN-Etch 1 x 2 gvar. accessories
System Kit 668497
Tetric N-Ceram Bulk Fill 2 x IVA, 1 x IVB, 1 x IVW 4 x 3.5 g eachTetric N-Bond Universal 1 x 0.5 mlN-Etch 1 x 2 gvar. accessories
System Kit 668481
Tetric N-Ceram Bulk Fill 2 x IVA, 1 x IVB, 1 x IVW 4 x 3.5 g eachTetric N-Bond Universal 1 x 3 gN-Etch 1 x 2 gvar. accessories
Refill 6647042 Syringe, shades IVA, IVB 3.5 g each
Refill 1 x 3.5 g See p. 12
1 Syringe, 3.5 g (3 shades)
Cavifils Refill 10 x 0.25 g See p. 12
10 Cavifils, 0.25 g each (3 shades)
Shade Guide 1x 644153
F i l l āŗ S c u l p t a b l e C o m p o s i t e s
1110
IPs empress directĀ®
IPS EmpressĀ® Direct ā the highly esthetic anterior and posterior filling material ā is available in 32 shades. Different types of anatomical features are effortlessly and faithfully recreated with this composite resin.
The shade system logically follows the anatomical build-up of the tooth:ā¢ 13 opaque dentin materials are available for reproducing dentin
and mamelon areas and placing cervical fillings in older patientsā¢ 16 translucent enamel shades are designed for replacing dental
enamelā¢ 3 highly translucent materials add individual characteristics to
incisal edges
before after
delivery forms
SyringesBasic Kit 8 x 3 g 627218
Dentin: A1, A2, A3 Enamel: A1, A2, A3 Transluscent: Trans 30, Trans Opal
Basic Kit (without shade guide) 8 x 3 g 635243
Dentin: A1, A2, A3, A3.5Enamel: A1, A2, A3, A3.5var. accessories
System Kit 686071AN
Dentin (A2, A3) 2 x 3 gEnamel (A1, A2, A3) 3 x 3 gTrans 30 1 x 3 gEffect Trans Opal 1 x 1.8 gOpaque 1 x 1.8 gAutoclavable Shade Guide Dentin 1 xAutoclavable Shade Guide 1 xEnamel/TranslucentVarious Accessories
System Kit 686072AN
Dentin (A2, A3) 2 x 3 gEnamel (A1, A2, A3) 3 x 3 gTrans 30 1 x 3 gEffect Trans Opal 1 x 1.8 gOpaque 1 x 1.8 gOptraSculpt Pad Instrument 1 xOptraSculpt Pad Refill (4 mm) 1 xAutoclavable Shade Guide Dentin 1 xAutoclavable Shade Guide 1 xEnamel/TranslucentVarious Accessories
Refill 1 x 3 g See p. 13
1 syringe, 3 g (32 shades)
Shade Guide IPS Empress Direct Dentin 1 x 627214
Shade Guide IPS Empress Direct Enamel 1 x 627215
CavifilsBasic Kit 80 x 0.2 g 627217
Dentin: A1, A2, A3 Enamel: A1, A2, A3 Transluscent: Trans 30, Trans Opalvar. accessories
Basic Kit (without shade guide) 80 x 0.2 g 635241
Dentin: A1, A2, A3, A3.5Enamel: A1, A2, A3, A3.5var. accessories
System Kit 686093AN
Dentin (A2, A3) 20 x 0.2 gEnamel (A1, A2, A3) 30 x 0.2 gTrans 30 10 x 0.2 gEffect Trans Opal 1 x 1.8 gOpaque 1 x 1.8 gAutoclavable Shade Guide Dentin 1 xAutoclavable Shade Guide 1 xEnamel/TranslucentVarious Accessories
System Kit 686095AN
Dentin (A2, A3) 20 x 0.2 gEnamel (A1, A2, A3) 30 x 0.2 gTrans 30 10 x 0.2 gEffect Trans Opal 1 x 1.8 gOpaque 1 x 1.8 gOptraSculpt Pad Instrument 1 xOptraSculpt Pad Refill (4 mm) 1 xAutoclavable Shade Guide Dentin 1 xAutoclavable Shade Guide 1 xEnamel/TranslucentVarious Accessories
Refill 10 x 0.2 g see p. 13
10 Cavifils 0.2 g each (32 shades)
Te-econom PlusĀ® Te-Econom Plus is a light-curing, radiopaque composite for restora-tive treatment. Available in syringes.
Indications:ā Restorations of classes I to V
advantages:ā Good physical properitiesā Good polishabilityā High radiopacityā Long working timeā Proven Ivoclar Vivadent technology and quality
shades:Universal shades: A1, A2, A3, A3.5, B2, C3
delivery form
Intro Pack 2 x 4 g 610908
1 x A2, 1 x A3 1 x 4 g each Eco-Etch 1 x 2 g Te-Econom Bond 1 x 5 g var. accessories
Intro Pack 4 x 4 g 610909
1 x A2, 1 x A3, 1 x A3.5, 1 x B2 1 x 4 g each Eco-Etch 1 x 2 g Te-Econom Bond 1 x 5 g var. accessories
Intro Pack 4 x 4 g 648186
1 x A1, 1 x A2, 1 x A3, 1 x B2 1 x 4 g each Eco-Etch 1 x 2 g Te-Econom Bond 1 x 5 g var. accessories
System Pack 8 x 4 g 610907
1 x A1, 3 x A2, 2 x A3, 1 x A3.5, 1 x B2 1 x 4 g each Eco-Etch 1x 2 g Te-Econom Bond 1 x 5 g var. accessories
Refill 3 x 4 g See p. 12
3 syringes, 4 g each (6 shades)
Refill 1 x 4 g See p. 12
1 syringe, 4 g (6 shades)
F i l l āŗ S c u l p t a b l e C o m p o s i t e s F i l l āŗ S c u l p t a b l e C o m p o s i t e s
Indications:ā Anterior restorations (Class III and IV)ā Posterior restorations (Class I, II)ā Cervical restorations (Class V, e.g. cervical caries, root erosion,
wedge-shaped defects)ā Adjustment of tooth position and shape (e.g. diastema closure,
closure of interdental āblack trianglesā, lengthening of the incisal edge) ā Direct veneers
advantages:ā Wide range of indications for anterior and posterior teethā Wide range of shades in various degrees of translucencyā Not bound to one given layering techniqueā Good polishing properties and high surface lusterā Lifelike fluorescenceā Low sensitivity to lightā Outstanding radiopacityā The shade guide of the system is autoclavable and made of ceramic: ā Due to its optimized handling properties, the material is easy to shape
as required:ā¢ Cavifil contents are easy to extrudeā¢ Material does not stick to instrumentsā¢ Excellent adaptation of the material to the cavity walls
shades:Dentin shades: A1, A2, A3, A3,5, A4, IVA5, IVA6, B1, B2, C3, D2, Bleach L, Bleach XLEnamel shades: A1, A2, A3, A3,5, A4, B1, B2, B3, B4, C1, C2, C3, D2, D3, Bleach L,Bleach XLTransluscent: Trans 20, Trans 30, Trans Opal
1312
F i l l āŗ F l o w a b l e C o m p o s i t e s
TetricĀ® n-flowTetric N-Flow is a flowable, light-curing, radiopaque nanohybrid composite for restorative treatment and the cementation of translucent ceramic composite restorations. Available in syringes and cavifils.
Indications:ā As initial layer under class I and II restorationsā Anterior restorations (Classes III, IV)ā Class V restorations (cervical caries, root erosion, wedge-shaped
defects)ā Small restorations of all typesā Extended fissure sealingā Splinting of mobile teethā Blocking out of undercutsā Adhesive cementation of translucent ceramic and composite
restorations
advantages:ā Nano-optimized technology encompassing nano-fillers and nano-
colour pigmentsā Excellent radiopacityā Short curing time of only 10s (at a light intensity of 1.000 mW/cm2)
shades:Enamel shades: A1, A2, A3, A3.5, A4, B2Dentin shades: A3.5Highly translucent Incisal shade: TBleach shades: Bleach Light (L), Bleach Incisal (I)
delivery forms
SyringesRefill 1 x 2 g See p. 12
1 syringe, 2 g each (10 shades)
CavifilsRefill 10 x 0.25 g See p. 12
10 Cavifils, 0.25 g each (10 shades)
Shade Guide 1x 604023
TetricĀ® n-flow bulkfillTetricĀ® N-Flow Bulk Fill is a flowable 4-mm bulk-fill compositefor direct restorative procedures in the posterior region.
Indications:
ā As initial layer / first increment in Class I and II composite restora-tions in permanent teeth
ā Restorations in deciduous teeth (without capping layer)ā Tetric N-Flow Bulk Fill is capped with a layer of e.g. Tetric N-Ceram
Bulk Fill or Tetric N-Ceram.
advantages:ā Time-saving due to 4 mm bulk-filling and Highly reactive light ini-
tiator Ivocerin*ā More esthetic than other bulk-fill composites.Particularly in cases
of discoloured tooth structure due to Aessenciotechnology it has Dentin-like translucency (ā¤ 10%).
shades:Available in 3 dentin-like universal shades: IVA, IVB and IVW.
delivery forms
Starter Pack 682428ANTetric N-Flow B. Fill Start/N-Univ. 1 x 3gTetric N-Bond Universal Bottle 3g 1 xTetric N-Flow Bulk Fill - IVA 2 x 2gTetric N-Flow Bulk Fill - IVB 1 x 2gTetric N-Flow Bulk Fill - IVW 1 x 2gN - Etch 1 x 2gShade Guide 1 xvarious accessories
Starter Pack 682428ANTetric N-Flow B. Fill Start/N-Univ. 0.5mlTetric N-Bond Universal VivaPen 1 x 0.5mlTetric N-Flow Bulk Fill - IVA 2 x 2gTetric N-Flow Bulk Fill - IVB 1 x 2gTetric N-Flow Bulk Fill - IVW 1 x 2gN - Etch 1 x 2gShade Guide 1 xvarious accessories
F i l l āŗ F l o w a b l e C o m p o s i t e s
IPs empress directĀ® opaque IPS EmpressĀ® Direct Opaque is a light-curing opaquing materialsuitable for masking exposed metal surface and discoloured toothstructure.
Indications:Masking of ā exposed metal surfaces when repairing damaged ceramic or
composite veneers intraorallyā discoloured tooth structure
advantages:ā High masking capability even when applied in thin layersā Universal opaque shade, no shade matching required
shade:opaque
delivery forms
Assortment 637898AN
IPS Empress Direct Color 7 x 1 g eachwhite, honey yellow, ochre, brown, purple, blue, greyIPS Empress Direct Opaque 1 x 1.8 g
Refill 1 x 1.8 g 637897AN
1 syringe, 1.8 g (opaque)
Application tips Ćø 0.9 mm (black) 1 x 20 634849
IPs empress directĀ® Color For true-to-nature characterization. Indications:
Individual characterization of direct and lab-fabricated compositerestorationsā Masking of discoloured tooth structureā Characterization of CAD/CAM veneers fabricated chairside
advantages:ā True-to-nature characterization of high-end composite and CAD/
CAM-fabricated restorationsā User-friendly direct application without dilutionā High masking capability even when applied in thin layersā Smooth consistencyā 0.4-mm tips for precise applicationā The ideal complement to IPS EmpressĀ® Direct and IPS Empress
CAD
shade:white, honey yellow, ochre, brown, violet, blue, grey
delivery forms
Assortment 637898AN
IPS Empress Direct Color 7 x 1 g eachwhite, honey yellow, ochre, brown, violet, blue, greyIPS Empress Direct Opaque 1 x 1.8 g
Refill
Tetric N-Flow Bulk Fill Ref. 1x2g IVA 681364AN
Tetric N-Flow Bulk Fill Ref. 1x2g IVB 681373AN
Tetric N-Flow Bulk Fill Ref. 1x2g IVW 681374AN
Tetric N-Flow Bulk Fill Ref 10x0.25g IVA 681375AN
Tetric N-Flow Bulk Fill Ref 10x0.25g IVB 681376AN
Tetric N-Flow Bulk Fill Ref 10x0.25g IVW 681376AN
Tetric N-Flow Bulk Fill Test 1x1.3g IVA 681378AN
1514
Indication:Suitable for adapting, shaping and contouring uncured sculptablecomposite materials. It is also available for lab composites.
advantages:ā Anti-stick effect: reduced adhesion of the composite to the
instrumentā Professional esthetics due to homogeneous surface design and
reference scales on the instrument handleā Reduced effort required for finishing and polishing
optrasculptĀ® PadOptraSculptĀ® Pad is a contouring instrument with special foam pad attachments, which is designed for the efficient, non-stick shaping of composite fillings. The highly flexible synthetic foam optimally adjusts to the tooth shape and allows the filling to be smoothly contoured, without leaving any unwanted marks on the composite material.
8Ā°
4.0 4.05.5 5.58.5 8.5
8Ā°5Ā° 5Ā°2.5Ā° 2.5Ā°
Reference scale on the instrument handle: The continuous vertical lines show ideal average widths, the dotted vertical lines average axial inclinations of the maxillary anterior teeth.
Indications Adaption, contouring and shaping of uncured, sculptable compos-
ite and compomer materials in class I, II, III, IV and V restorations. Also suitable for laboratory composites.
advantages- Efficient contouring of composites due to reduced adhesion of the
composite material to the instrument- Creation of homogeneous restoration surfaces - Precise contouring of anatomical tooth structures with the 3
attachment shapes- Optimized working angle: for better access to the cavities
optrasculptnext GenerationOptraSculpt āNext Generationā is a contouring instrument for the efficient contouring of composite restorations in the posterior region.
The attachments consisting of two components have been designed in a special procedure and facilitate the contouring of smooth and highly esthetic restoration surfaces. The attachments especially de-signed for the posterior region also facilitate the life-like recreation of anatomical tooth structures such as cusp slopes, fissures and proximal marginal ridges. The newly designed ring attachment holder of the OptraSculpt Pad instrument allows flexible usage of the attachments in the anterior region and everywhere desired.
F i l l āŗ M a n u a l I n s t r u m e n t s
delivery forms
Assortment 639791
OptraSculpt Pad Instrument 1 x OptraSculpt Pad Refill/4 mm 60 xOptraSculpt Pad Refill/6 mm 60 x
OptraSculpt Pad Refill/4 mm 60 x 639792
OptraSculpt Pad Refill/6 mm 60 x 639793
OptraSculpt Pad Instrument Refill 1 x 646004
delivery forms
OptraSculpt & OptraSculpt Pad System Kit 683066AN
Single-ended instrument 1 xDouble-ended instrument 1 xPads /4 mm 60 xBall 20 xChisel 20 xPointed tip 20 x
OptraSculpt Starter Kit 683067AN
Double-ended instrument 1 xBall 20 xChisel 20 xPointed tip 20 x
OptraSculpt Refill/ Ball/ 60 60 x 683068AN
OptraSculpt Refill/ Chisel/ 60 60 x 683069AN
OptraSculpt Refill/Pointed Tip/ 60 60 x 683100AN
OptraSculpt Refill - Double-ended Instrument 1 x 683154AN
1716
1,200 mW/cm2
LED for all curing needs
bluephase nĀ®
advantages:ā Halogen-like light spectrum due to PolywaveĀ® LED technology
(385 to 515 nm)ā Built-in fan enabling unrestricted use without clinical limitationsā Click & Cure for optional mains operation, independent of the
batteryā Cordless design offering the ultimate in mobilityā Selection of three programs for fast, close-to-the-pulp and
stressreduced polymerizationā Powerful lithium-polymer battery offering 60 minutes of operationā Seamless construction of the housing for optimum practiceā Modern OLED colour display offering enhanced brightness and
readabilityā Innovative movement sensor ensuring immediate readiness for
operationā 3-year warranty (battery 1 year)
delivery forms
Bluephase NĀ® 100 ā 240 V 659683
Bluephase NĀ® handpiece (handpiece, battery, light probe) 659681
Bluephase NĀ® battery 659956
Bluephase NĀ® is a battery-operated high-performance LED curing light with a light intensity of 1,200 mW/cm2.
Indication:LED curing light for the polymerization of all light-curing dentalmaterials in the wavelength range of 385 to 515 nm.
advantages:ā Fanless construction for continuous operation without clinical
limitationsā Maximum power supply due to the lithium-polymer batteryā Cordless design allows for absolute mobility and freedom of
movementā Adjustable curing times for efficient curingā Rotable 10-mm light probe for a large treatment fieldā Intuitive 1-button operation and uncomplicated handlingā 2-year warranty (battery 1 year)
delivery forms
Bluephase NĀ® M 100 ā 240 V 647620
Bluephase NĀ® M handpiece (handpiece, battery, light probe) 647621
Bluephase NĀ® M battery 647622
Bluephase NĀ® M is a battery-operated LED curing light offering a light intensity of 800 mW/cm2.
Indication:LED curing light for the polymerization of light-curing dentalmaterials in the wavelength range of 430 to 490 nm.
800 mW/cm2
LED for all occasions
bluephase nĀ® m
C u r e āŗ C u r i n g L i g h t s
bluephase nĀ® mCLED for all budgets
800 mW/cm2
C u r e āŗ C u r i n g L i g h t s
ā Click & Cure for battery-independent emergency corded operationā Cordless design ensuring the ultimate in mobilityā High light intensity of 1,100 mW/cm2 for reduced curing times
starting from 10 secondsā Easy operation due to intuitive 2-button operationā Large treatment field due to 10-mm light probeā Shortened light probe tip: all tooth surfaces can be easily reached,
eliminating the need for extreme opening of the mouthā Inductive charger enabling contactless charging of batteryā Base station with battery charge indicator for easy checking of
battery charge levels from a large distance ā High capacity lithium polymer battery allowing 20 minutes of
continuous operationā Closed construction of the housing for optimum practice hygieneā Easy cleaning of the charging base due to discharge openingā Innovative movement sensor ensuring immediate readiness for
operationā 3-year warranty (battery 1 year)
bluephaseĀ® style ā on an ergonomic missionBluephase Style is a cordless high-performance LED polymerization light with an intensity of 1,200 mW/cm2. It is designed to suit the hands of women and men due to its compact shape.
Indication: Curing light for the polymerization of all dental materials in the wavelength range of 385 to 515 nm.
advantages:ā Ergonomic shape to fit the hands of men and womenā PolywaveĀ® LED with a broad light spectrum ranging from 385 to
515 nm, suitable for all materialsā Fanless construction for continuous operation without clinical
limitations
advantages:ā Fanless construction for continuous operation without clinical
limitationsā Simple and ergonomic due to universal program and 1-button
operationā Rotable 10-mm light probe for large treatment fieldā Low priceā 2-year warranty
delivery forms
Bluephase NĀ® MC 100 ā 240 V 47619
delivery forms
BluephaseĀ® Style 100 ā 240 V grey 635153
blue 642513
pink 642514
BluephaseĀ® Style battery 637692
BluephaseĀ® Style handpiece (handpiece, battery, light probe)
grey 637916
blue 643296
pink 643307
The Bluephase NĀ® MC is a mains-operated, cost-effective LED curing light offering a light intensity of 800 mW/cm2.
Indication:LED curing light for the polymerization of light-curing dentalmaterials in the wavelength range of 430 to 490 nm.
1918
C u r e āŗ C u r i n g L i g h t s F i n i s h āŗ Po l i s h e r s
optraPolĀ® Efficient and advanced one-step polishing system with a highconcentration of diamond particles. A high-gloss finish and smoothsurfaces are achieved in only one working step. OptraPolĀ® polisherscan be autoclaved and re-used.
shapes:ā Small flameā Large flameā Cupā Lens
Indication:OptraPol provides efficient high-gloss polishing results in just onestep. It is indicated for the high gloss polishing of direct and indirectrestorations made of all popular types of composite material as wellas for amalgam restorations.
advantages:ā One-step polishing systemā Radiant high-gloss restoration surfaces in only one stepā High wear resistanceā Autoclavable and reusable
delivery forms
Assortment/18 634464
Small flame 6 xLarge flame, cup, lens 4 x each
Refill
Cup 10 x 634459
Large flame 10 x 634461
Small flame 10 x 634458
Lens 10 x 634460
astropolĀ®
Indication:AstropolĀ® is indicated for the pre-polishing and polishing ofrestorations made of composite material and amalgam.
astropol fPolishing tips (grey) for the removal of excess composite materialfrom proximal and occlusal surfacesastropol PPolishing tips (green) for polishing composite materialsastropol hPPolishing tips (pink) for final high-gloss
shapes: ā Small flameā Large flameā Cupā Disc
delivery forms
Assortment /24 557625
Astropol F: Small flame, large flame, cup, disc 3x eachAstropol P: Small flame, large flame, cup, disc 2x eachAstropol HP: Small flame, large flame, cup, disc 1x each
Refill Astropol F (grey)
Small flame 6 x 557615
Large flame 6 x 557616
Cup 6 x 557617
Disc 6 x 557618
Refill Astropol P (green)
Small flame 6 x 557614
Large flame 6 x 557621
Cup 6 x 557619
Disc 6 x 557620
Refill Astropol HP (pink)
Small flame 3 x 557613
Large flame 3 x 557622
Cup 3 x 557623
Disc 3 x 557624
Included in the delivery forms Available as accessory
Technical data Bluephase NĀ® Bluephase NĀ® M Bluephase NĀ® MC
Light intensity 1,200 mW/cm2
10 %
800 mW/cm2
10 %
800 mW/cm2
10 %
All light-curing materialsWavelength range (385 ā 515 nm)
ā(430 ā 490 nm)
ā(430 ā 490 nm)
All the timeClick & Cure function ā ā
Absolutely mobileWireless operation
ā (Corded operation)
All indicationsContinuous operation of >10 minutes
Curing times for selected composite materials2 mm Tetric N-Ceram4 mm Tetric N-Ceram Bulk Fill
10 s 15 s 15 s
Curing programs
HIGH Power 1,200 mW/cm2 800 mW/cm2 800 mW/cm2
LOW Power 650 mW/cm2 ā ā
SOFT Start 650 / 1,200 mW/cm2 ā ā
Light probe 10 mm, black 10 mm, black 10 mm, black
Power supply
Lithium-polymer battery, capacity: approx. 60 minutes,
charging time: approx. 2 hours
Lithium-polymer battery, capacity: approx. 60 minutes,
charging time: approx. 1 hour
Corded operation
Warranty 3 years (battery 1 year)
2 years (battery 1 year) 2 years
650 mW/cm2
t [s]0
1ā200 mW/cm2
5
650 mW/cm2
0 t [s]
1,200 mW/cm2
t [s]0
Delivery forms / Accessories Bluephase NĀ® Bluephase NĀ® M Bluephase NĀ® MC
Complete unit, 100 ā 240 V 659 683 647 620 647 619
Single handpiece(including battery and 10-mm light probe) 659 681 647 621 ā
Spare battery 659 956 647 622 ā
10-mm light probe, black (N)656 196
6 > 2 mm (Pin-Point), black608 538
Protective sleeves608 554
Anti-glare cone551 756
Anti-glare shield592 496
2120
F i n i s h āŗ Po l i s h e r s
PolitipĀ®
Multiple-use, 2-step polishing system for composites and amalgam.
Indication: PolitipĀ® is indicated for the polishing of restorations made of composite material and amalgam..
shapes: ā Small cupā Large cupā Flame
delivery forms
Assortment PolitipĀ® Polisher (P) / Finisher (F) 551580Finisher shapes: flame 6x large cup, small cup 3x eachPolisher shapes: flame 6x large cup, small cup 3x each
Refill Politip-F
Flame 6 x 533602
Large cup 6 x 533603
Small cup 6 x 533604
Refill Politip-P
Flame 6 x 533584
Large cup 6 x 533585
Small cup 6 x 533587
M a i n t a i n āŗ C a r e P r o d u c t s
ProxytĀ®
The Proxyt prophy pastes with defined abrasive values (RDA) ensure professional, needs-oriented cleaning and polishing of teeth, restora-tions and implant-supported reconstructions, due to their advanced formula. The pastes contain xylitol, which inhibits the growth of the bacteria that cause caries.
Containing fluorideProxyt RDA 83, coarseProxyt RDA 36, mediumProxyt RDA 7, fine
fluoride-freeProxyt RDA 36, medium
advantages:ā Customized, gentle cleaning and polishingā Scratch-free cleaning of sensitive surfaces using the fine Proxyt
without pumiceā Smooth consistency, splatter-free formulaā Fresh peppermint taste
delivery forms
Refill RDA 7, fine 1 x 55 ml 579866
Refill RDA 36, medium 1 x 55 ml 579867
Refill RDA 83, coarse 1 x 55 ml 579868
Refill RDA 36, medium fluoride-free 1 x 55 ml 633064
fluor Protector nFluoride-containing varnish for the desensitization of teeth and protection against caries and erosion. Innovative formula; economical delivery form; suitable for children and adults.
Indication:ā Treatment of hypersensitive tooth necksā Build-up of acid resistance of dental enamelā Long-term caries preventionā Treatment of sensitivity after tooth whitening
advantages:ā 7700 ppm fluoride in a homogeneous solution; approx. 4-times
higher concentration after settingā Ready for immediate use; effective fluoridationā Easy to dispense; optimum price performance ratio
delivery forms
Fluor Protector N Refill 1 x 7 g 639518Strong protection with Fluor Protector N
2322
delivery forms
Cention N Refill Liquid 1x8g 684197AN
Cention N Refill Powder 1x30g A2 684198AN
Cention N Starter Kit 1x 15g P & 1 x 4gL 684199AN
Cention N System Kit 1x 30g P & 1 x 8gL 684196AN
Cention nneW
Powder-liquid filling material
A newalternativeto amalgam
A newalternativeto amalgam
O t h e r P r o d u c t s āŗ A l k a s i t e s
advantages:Stronger than glass ionomer cement due to High Flexural Strength
Due to its tooth-coloured esthetics and translucency, it is more esthetic than amalgam and glass ionomer cement.
Time saving application protocol helps replacing the tooth structure in only 4 steps
Alkaline filler contained in the material releases calcium, fluoride and hydroxide ions. This helps to prevent demineralization and promote remineralization
Cention n Cention N is a self-curing powder-liquid filling material for the complete and permanent replacement of tooth structure in posterior teeth. It belongs to the materials group of Alkasites.
Indications:- Permanent fillings in class I and II cavities - Fillings for retentively prepared class I and II cavities, with-
out an adhesive - Permanent fillings in class V cavities in combination with
an adhesive - Fillings in deciduous teeth
A c c e s s o r i e s
IPsĀ® Ceramic etching Gel The IPS Ceramic Etching Gel is used for the creation of retentive bonding surfaces on all-ceramic restorations to prepare for cementation. It enhances the bonding effect between the composite cement and the ceramic bonding surface.
delivery forms
IPS Ceramic Etching Gel Kit 531550
IPS Ceramic Etching Gel 1 x 5 ml Neutralizing Powder 1 x 30 g
Refill
IPS Ceramic Etching Gel, red 1 x 5 ml 531548
Neutralizing Powder 1 x 30 g 531549
1mmprep
Since its introduction, IPS e.maxĀ® lithium disilicate has been relied upon for its high strength and high esthetics by clinicians worldwide. Now, after 10 years of continuous quality testing, IPS e.max lithium disilicate has demonstrated an average biaxial flexural strength of 500 MPa*. Due to the materialās long-term clinical success and proven record of strength, crowns with only 1 mm occlusal reduction are now possible when adhesively bonded. The IPS e.maxĀ® you know, but even more versatile!
ā¢ 1mm minimally invasive preparationā¢ New translucency optionsā¢ 500 MPa for maximum confidence
For your next case choose the trusted, most prescribed** all-ceramic in the world. IPS e.max... all ceramic ā all you need.
*Source: R&D Ivoclar Vivadent AG, Schaan, Liechtenstein**Based on sales figures
High strength, high esthetics
www.ivoclarvivadent.comIvoclar Vivadent AGBendererstr. 2 | 9494 Schaan | Liechtenstein | Tel. +423 235 35 35 | Fax +423 235 33 60
500IPS e.max Ā®
is now even more versatile!
Ivoclar Vivadent Marketing (India) Private Limited,503-504, Raheja Plaza,15 B Shah Industrial Estate, Off Veera Desai Road, Andheri (W), Mumbai - 400 053 IndiaTel:- +91 22 26730302 Fax:- +91 22 26730301Customer Care No:- +919820758798Email id :- [email protected]
2524
Te m p o r a r y R e s t o r a t i o n
systempĀ®.desensitizerSystemp.desensitizer is suitable for the prevention and reduction of dentin hypersensitivity and post-operative pain.
Indications:ā Temporary restorations (e.g. with Systemp.inlay, Systemp.onlay,
Systemp.c&b II)ā Conventional cementation of indirect restorationsā Direct restorations (e.g. amalgam, glass ionomer cement)
advantages:ā Needs to be brushed into dentin surfaces for only 10 seconds;
no light-curing requiredā The use of Systemp.desensitizer will not affect the retention of
temporary restoratives, cements or filling materialsā Has a cleaning effect on the lesion
delivery forms
Refill 1 x 5 g 559596
Indications:Fabrication of temporary restorationsā Crowns and bridgesā Inlays and onlaysā Veneersā Post-retained temporary crowns
advantages:ā High fracture strength and optimum wear periodā Accuracy of fit and tension-free resultsā Protection of the dental pulp and tissuesā Easy handling due to automix double-barrel cartridge
shades:Bleach BL3, A1, A2, A3, A3.5
delivery forms
Telio CS C&B Starter Kit A2 628244
Telio CS C&B A2 1 x 78 gMixing Tips 10 xTelio CS Link Transparent 1 x 6 gMixing Tips 5 xTelio CS Desensitizer 1 x 5 gApplication Brushes 50 xvar. accessories
Refill Telio CS C&B 1 x 78 g
Double-barrel cartridge, 10:1, var. accessories
Bleach BL3 628249
A1 628245
A2 628246
A3 628247
A3.5 628248
Refill Dispenser 1 x 561381
Refill Mixing Tips 50 x 628157
TelioĀ® Cs C&b Self-curing composite material in paste form for the fabrication of temporary restorations.
Indications:Temporary cementation of provisionalsā Crowns and bridgesā Inlays and onlaysā Veneers
advantages:ā Eugenol-freeā Dual-curingā High esthetics due to two translucent shadesā Ideal retention behaviourā Easy handling due to automix double-push syringe
shades:A3 and Transparent
delivery forms
Telio CS C&B Starter Kit A2 628244
Telio CS C&B A2 1 x 78 gMixing Tips 10 xTelio CS Link Transparent 1 x 6 gMixing Tips 5 xTelio CS Desensitizer 1 x 5 gApplication Brushes 50 xvar. accessories
Refill Telio CS Link 2 x 6 g
Double-push syringe, 1:1, var. accessories
A3 627912
Transparent 627914
Refill Mixing Tips 10 x 627948
TelioĀ® Cs Link Dual-curing, translucent, temporary composite cement for the esthetic and provisional cementation of temporary restorations.
Te m p o r a r y R e s t o r a t i o n
2726
VariolinkĀ® nDual-curing (light- and self-curing) luting composite. Indications:
ā Adhesive cementation of ceramic, Ceromer/FRC and composite restorations (inlays, onlays, crowns, veneers, metal-free bridges)
advantages:ā Available in 4 shades and two degrees of viscosityā High radiopacityā Highly esthetic results
shades:Transparent, Yellow, White, Bleach XLCatalyst is available in two shades (Transparent, Yellow) and two viscosities (low, high viscosity)
delivery forms
Professional Set 642981
Base: transparent, yellow, white, Bleach XLCatalyst: transparent/low viscosity, transparent/high viscosity Catalyst: yellow/low viscosity, yellow/high viscosityHeliobond, Syntac Adhesive, Syntac Primer, Monobond N, N-Etch, Liquid Strip, various accessories
Esthetic Cementation System 642978
Base: transparent, yellow, white, Bleach XLCatalyst: transparent/low viscosity, transparent/high viscosity Catalyst: yellow/low viscosity, yellow/high viscosityExciTE F DSC, Monobond N, N-Etch, Liquid Strip, various accessories
Intro Pack 642979
Base transparent, Catalyst transparent/low viscosity, Monobond N, Liquid Strip, various accessories
Bonding System 632341
Heliobond, Syntac Adhesive, Syntac Primer, N-Etch, various accessories
Bonding System ExciTE F DSC 637211
ExciTE F DSC Single Dose Regular 20 x 0.1 g N-Etch 1 x 2 g
Variolink N Base Refill 1 x 1.5 ml
Transparent 632335
Yellow 632334
White 632333
Bleach XL 632332
Variolink N Catalyst Refill 1x 1.5 ml
Transparent/low viscosity 632331
Transparent/high viscosity 632330
Yellow/low viscosity 632329
Yellow/high viscosity 632328
C e m e n t a t i o n M a t e r i a l s C e m e n t a t i o n M a t e r i a l s
VariolinkĀ® n Try-InWater-soluble, glycerine-based try-in paste for lab-fabricated ceramic and composite restorations. Available in the four Variolink N shades.
Indications:ā Simulating the shades of Variolink N luting compositeā Protecting the etching pattern of lab-fabricated all-ceramic
restorations
shades:Transparent, yellow, white, Bleach XL, Clear, +1, +2
delivery forms
Refill 1 x 1.5 ml
Transparent 632340
Yellow 632339
White 632338
Bleach XL 632337
Clear 643416
+1 632688
+2 643415
VariolinkĀ® n LCLight-curing luting composite for the high-esthetic cementation. Indications:
ā Adhesive cementation of translucent all-ceramic restorations with a thickness of < 2.0mm (veneers, inlays, onlays)
advantages:ā High shade stability due to a specific amine-reduced formulationā Low wear, good polishing properties
shades:Clear: Neutral effect (50% translucency)+1: Little brightening (24% translucency)+2: Brightening, whitening effect (12% translucency)
delivery forms
System Pack 642969
Variolink N LC clear, +1, +2 3 x 1.5 mlMonobond N 1 x 5 gTetric N-Bond 1 x 6 gVarious accessories
Refill 1 x 1.5 ml
Clear 643413
+1 632687
+2 643414
2928
C e m e n t a t i o n M a t e r i a l s
multilinkĀ® speed Self-adhesive, self-curing resin cement with light-curing option that simplifies and speeds up cementation procedures. It eliminates the need for conditioning with phosphoric acid and bonding.
Indications:Self-adhesive cementation of indirect restorations made of the following materials:ā Metal and metal ceramicsā High-strength all-ceramics (zirconium oxide, lithium disilicate and
aluminium oxide ceramics)ā Fibre-reinforced composites
advantages:ā No phosphoric acid etchingā No primer, bonding agents or adhesives for enamel and dentinā Fast and easy handling due to automix deliveryā Excellent physical propertiesā Good bonding valuesā Easy removal of excess material
shade:Transparent
delivery forms
Starter Pack 642977
Multilink Speed automix syringe, transparent 1 x 2.5 g Mixing Tips 4 x Monobond N 1 x 1 g
Refill 632342
Multilink Speed automix syringe, transparent 1 x 6 g Mixing Tips 10 x
multilinkĀ® nThe universal luting composite Multilink N in the automix syringe is characterized by a wide range of indications, excellent material properties and its time-saving direct application.
Indications:Cementation of indirect restorations (inlays, onlays, crowns, bridges, endodontic posts) made of:ā Metal and metal-ceramic (PFM)ā All-ceramics (silicate)ā Reinforced all-ceramics (zirconium and aluminium oxide)ā Composites and fibre-reinforced composites (FRC)
advantages:ā High and long lasting bond to all surfacesā Universal use ā for nearly all cementation cases ā Time-saving direct application
shades:Transparent, yellow
delivery forms
System Pack
Multilink N automix syringe 1 x 6 g Mixing Tips 10 x Multilink N Primer A/B 2 x 3 g Monobond N 1 x 5 g var. accessories
Transparent 642974
Yellow 642976
Starter Pack 642973
Multilink N automix syringe, transparent 1 x 2.5 g Mixing Tips 4 x Multilink N Primer A/B 2 x 1 g Monobond N 1 x 1 g var. accessories
Refill
Multilink N automix syringe 1 x 6 g Mixing Tips 10 x
Transparent 632321
Yellow 632322
Refill Multilink N Primer A 1 x 3 g 632198
Refill Multilink N Primer B 1 x 3 g 632319
Refill Monobond N 1 x 5 g 642967
Refill Mixing Tips 15 x 592225
Refill Applicators 2 x 25 592435
Applicators (25 large, 25 small)
monobond nUniversal, single-component bonding agent for all indirect restorative materials.
delivery form
Refill 1 x 5 g 642967
Indications:Universal, single-component bonding agent for all indirect restorative materials (glass and oxide ceramics, metal, composite, fibre-rein-forced composite). It generates a strong bond between the restora-tion and the cementation material.
Liquid stripGlycerine gel to prevent the oxygen-inhibited layer of composites with composite or ceramic restorations.
Indications:ā Try-in pasteā Preventing an inhibited layer with compositesā Protecting the etching pattern of lab-fabricated all-ceramic
restorations
delivery form
Refill 1 x 2.5 g 532505
C e m e n t a t i o n M a t e r i a l s
VivaglassĀ® Cem PLSelf-curing glass ionomer cement with high translucency. Indications:
ā Cementation of full-cast crowns or veneers, high-strength all- ceramic materials and orthodontic bands.
advantages:ā High translucencyā 1:1 mixing ratioā Radiopacityā Strong bond to dentinā Optimum wetting of powder and liquidā Easy removal of excess material
shade:Universal
delivery form
Assortment 1 x 30 g / 10 ml 562256
Powder, Liquid, var. accessories
Refill Liquid 1 x 10 ml 638995
3130
advantages: ā No dosing, no mixingā Brackets can be placed on the tooth surfaces without time pressure
due to the light-curing properties of the material
delivery form
Refill 3 x 2.5 g 532629
heliositĀ® orthodonticLight-curing, highly transparent single-component luting material for brackets.
C e m e n t a t i o n M a t e r i a l s
IPS StyleĀ®
NEW
The first metal-ceramic containing patented oxyapatite
!YOURMAKE ITSTYLE
ā¢ Make it fast. IPS Styleās low shrinkage saves you time.
ā¢ Make it easy. The materialās ease of use ensures reliable results.
ā¢ Make it natural. The patented oxyapatite controls the translucency and depth effect.
Make it your Style. Try it now!
E n d o d o n t i c s / C o r e B u i l d U p
apexCalĀ®
ApexCal is the new, creamy calcium hydroxide paste suitable for use as a temporary disinfectant dressing during endodontic treatment.
Indications:ā Applied as a drug filler during root canal treatment and used for
indirect and direct pulp capping
advantages:ā Time-saving direct applicationā Easy removal, as the material does not set when in placeā High radiopacity (400% Al)
delivery forms
Refill 595915
Syringes ApexCal 2 x 2.5 g Cannulas 15 x
Refill 596608
Cannulas 15 x
apexitĀ® PlusCalcium hydroxide root canal sealer for the permanent obturation of root canals.
Indications:ā Permanent obturation of root canals in conjunction with all
obturation techniques involving gutta-percha
advantages:ā Excellent tissue toleranceā Durable sealing of the root canal due to the slight setting
expansionā Its easy flowing composition allows the material to adapt well even
to morphologically complicated canalsā Convenient application (automix syringe and Intra Canal Tip enable
easy direct application)ā Long working time (mixed Apexit Plus can be used over 3 hours at
room temperature)
delivery forms
Refill 593991
Double-push Syringes 2 x 6 g Mixing Tips 15 x Intra Canal Tips 5 x
Refill 595132
Mixing Tips 15 x
Refill 597380
Intra Canal Tips 15 x
Direct application of ApexCal with a tip
Application of ApexCal with a lentulo spiral
Rinsing out of the temporary ApexCal dressing
Initial situation Direct application of Apexit Plus using an Intra Canal Tip
Application of Apexit Plus using a lentulo spiral
Insertion of the gutta percha points
Condensation of the gutta percha points using a spreader
Obturated root canal
3332
E n d o d o n t i c s / C o r e B u i l d U p
Prepare the post space Cement the post with Multilink
Build up the core withMultiCore Flow
Completed core build-up
frC PostecĀ® PlusFRC Postec Plus is a highly esthetic and highly radiopaque root canal post composed of glass fibre-reinforced composite. The post is suitable for the chairside reconstruction of endodontically treated teeth that show extensive coronal damage. The FRC Postec Plus system consists of light-transmitting glass fibre-reinforced composite posts in three sizes and includes purpose- designed stainless steel reamers for the preparation of the recipient site of the post space.
Indications: ā Restoration of endodontically treated anterior and posterior teeth
that demonstrate severe coronal damage
advantages: ā Lifelike appearanceā Superior radiopacityā High retentionā Gentle on roots ā Clearly arranged system using tried-and-tested productsā Easy to removeā Clinically proven concept
delivery forms
Intro Pack Size 0/1/3 603543
FRC Postec Plus Size 0 3 x FRC Postec Plus Size 1 5 x FRC Postec Plus Size 3 2 x FRC Postec Plus Reamer Size 0 1 x FRC Postec Plus Reamer Size 1 1 x FRC Postec Plus Reamer Size 3 1 x
Refill Size 0 20 x 603540
Refill Size 0 5 x 603541
Refill Size 1 20 x 590222
Refill Size 1 5 x 583244
Refill Size 3 20 x 590223
Refill Size 3 5 x 583245
Refill Reamer, Size 0 1 x 603542
Refill Reamer, Size 1 1 x 572801
Refill Reamer, Size 3 1 x 572800
E n d o d o n t i c s / C o r e B u i l d U p
multiCoreĀ®
Self-curing composite core build-up material with light curing option.Two consistencies, two techniques, two curing methods and four shades provide an optimum foundation for the reconstruction of vital and non-vital teeth with part or most of the clinical crown missing.
delivery forms
MultiCoreĀ® FlowRefill 1 x 10 g
Automix Syringe, var. accessories
Light 604166
Medium 604167
White 604168
Mixing Tips small 10 x 604209
Intra Oral Tips small 10 x 604210
Root Canal Tips 5 x 603018
Refill 1 x 50 g
Base, Catalyst, var. accessories
Light 578913
Medium 578914
Blue 578915
Dispenser 1 x 579094
Mixing Tips 50 x 579096
Intra Oral Tips 50 x 579095
Indications:ā Core build-up of vital and non-vital teeth
advantages:ā Based on Ivoclar Vivadentās long-term experience in the field of
composite technologyā A suitable option for every case: Self- or light-curingā Four different shadesā Coordinated system with the self-etching AdheSEĀ®
shades:Light, medium, blue and white
Automix syringe, 10 g
Cartridge, 50 g
3534
VirtualĀ®
Virtual is the new line of vinylpolysiloxane impression materials specifically developed to meet the requirements of todayās most popular impression taking techniques.The system features the five viscosities Putty, Heavy Body, Mono-phase, Light Body and Extra Light Body in both "fast" (2:30 min.) and "regular" (4:30 min.) setting times.
The system is complemented by a full line of accessories, including a tray adhesive.
Indications: ā Final impressions used for the fabrication of indirect restorations
(crowns, bridges, inlays, onlays and veneers)ā Dental implant impressionsā Matrix for "wax-ups" and treatment planning, study modelsā Edentulous impressionsā Matrix used to create temporary restorations
advantages: ā Excellent adaptation to the moist oral hard and soft tissuesā Excellent moisture displacementā Exceptional readability and precisionā Flexible working times and fast setting phaseā Fresh peppermint scentā Outstanding balance of physical properties
shades:Sea blue: Virtual Putty, Virtual Heavy Body and Virtual MonophaseCaramel: Virtual Light Body and Virtual Extra Light Body
delivery forms
Multi Pack 12 x 50 ml + Mixing Tips
Extra Light Body Fast 572812
Extra Light Body Regular 572813
Light Body Fast 572826
Light Body Regular 572827
Monophase Fast 572828
Monophase Regular 572829
Heavy Body Fast 572830
Heavy Body Regular 572831
Refill 2 x 50 ml + 6 Mixing Tips
Extra Light Body Regular 562827
Extra Light Body Fast 562828
Light Body Regular 562829
Light Body Fast 562830
Refill 2 x 50 ml + 12 Mixing Tips
Monophase Regular 562831
Monophase Fast 562832
Heavy Body Regular 562835
Heavy Body Fast 562836
Refill
Putty Regular 2 x 300 ml 562839
Putty Fast 2 x 300 ml 562840
Virtual AccessoriesTray Adhesive 1 x 10 ml 562841
Refill Mixing Tips, small 48 x 572806
Refill Mixing Tips, large 48 x 572807
Refill Intra Oral Tips, large 100 x 572808
Refill Intra Oral Tips, small 100 x 572809
Refill Dispenser 1:1 50 ml 1 x 572810
I m p r e s s i o n M a t e r i a l s I m p r e s s i o n M a t e r i a l s
VirtualĀ® 380The two consistencies Heavy Body and Monophase are now offered as Virtual 380 in new, large cartridges. These XXL cartridges are suitable for use in e.g. Pentamix, Plug & Press Dispenser and MixStar mixing units.
advantages:ā Ready-to-use, large cartridge - convenient handlingā Separate activation as in the case of foil bags is not requiredā Economical package size - contents 380ml
delivery forms
Multi Pack 6 x 380 ml each + Mixer + Bayonet Ring
Monophase Fast 594835
Heavy Body Fast 594836
Heavy Body Regular 594837
Refill 2 x 380 ml each + Mixer + Bayonet Ring
Monophase Fast 594838
Heavy Body Fast 594839
Heavy Body Regular 594840
AccessoriesRefill Dynamic Mixer 50 x 600158
VirtualĀ® Cadbite registrationVirtual CADbite registration material is scannable and can be used for the optical recording of data when fabricating restorations with CAD/CAM systems such as CEREC. Virtual CADbite is an addition silicone, which may also be used for āconventionalā bite registration techniques in conjunction with indirect restorative procedures. The material demonstrates a non-slump consistency, short setting time and good dimensional stability. Moreover, it provides excellent reproduction of detail and achieves a final hardness of 32 Shore D.
delivery forms
Multi Pack 12 x 50 ml 607909
and Mixing Tips
Refill 2 x 50 ml 607908
and Mixing Tips
Accessories Refill Mixing Tips, small 48 x 572806
advantages:fast As the material requires an intra-oral set time of only 45 seconds, the risk of distortions and inaccuracies due to patient jaw movements are substantially reduced. At the same time, Virtual CADbite provides sufficient working time to allow full-arch bite registrations to be taken.strong Due to the materialās high final hardness of 32 Shore-D and high fracture toughness, Virtual CADbite registrations are easy to trim and grind. Moreover, undesirable shifts are prevented when adjusting the position of the casts in the articulator.scannable In response to the needs of CAD/CAM users across the globe, Virtual CADbite has been given a reflective surface. It delivers excellent results when capturing images with intra-oral scanning devices.
Scanned bite recordBite registration with Virtual CADbite in situ
3736
P r o f e s s i o n a l C a r e P r o d u c t s
Plaque TestFluorescent disclosing liquid to expose plaque by means of a polymerization light.
advantages:ā No inconvenient staining of tongue and mucous membranesā Easy handlingā Fluorescent under any polymerization light
delivery forms
Refill 1 x 11 g 533299
VivasensĀ®
Desensitizing varnish for hypersensitive teeth. Indications:ā Hypersensitive cervicalsā Hypersensitivities due to bleachingā Desensitization after professional tooth cleaning, scaling and root
planingā Dentin protection under restorative materials
advantages:ā Long-term reliefā Quick to workā Quick to useā Gentle to gumsā Free Stand Single Dose - free-standing with grip surface
delivery forms
Single DoseAssortment 22 x 0.1 g 561958
BottleAssortment 1 x 4 g 574359
heliosealĀ® heliosealĀ® fheliosealĀ® ClearLight-curing, resin-based fissure sealants for the preventive sealing of pits and fissures, using the enamel etching technique.The new, ergonomically shaped syringe fits snugly in the palm of the hand and therefore allows the sealants to be dosed and applied more accurately than previous versions of the products.
heliosealWhite-shaded sealant that permits easy control during application and at recalls
helioseal fWhite-shaded sealant with additional fluoride release
helioseal ClearTransparent sealant for excellent esthetic results and easy monitoring of fissures in case of doubt
advantages:ā Precise application, the basis for top quality sealing resultsā Well-proven in many years of clinical useā Effective protection against caries
delivery forms
HeliosealAssortment 1 x 8 g 533298
Helioseal, Email Preparator blue, var. accessories
Refill 1 x 8 g 533297
Helioseal FAssortment 5 x 1.25 g 558518
Helioseal F, Email Preparator blue, var. accessories
Refill Syringe 1 x 1.25 g 558519
Refill Cavifils 50 x 0.1 g 543793
Helioseal ClearAssortment 5 x 1.25 g 558520
Helioseal Clear, Email Preparator blue, var. accessories
Refill 1 x 1.25 g 558521
P r o f e s s i o n a l C a r e P r o d u c t s
fluor ProtectorProtective varnish containing fluoride for desensitization and caries prophylaxis. Comprehensive clinical documentation. advanced protection against sensitivity, caries and erosive wear due to:ā Closing of open dentin tubules ā Prevention of demineralizationā Stimulation of remineralizationā Remineralization of incipient caries
advantages:ā 0.1% in a homogeneous solution; concentration is 10x higher
after the varnish has driedā Optimum estheticsā Excellent adhesionā Suitable for all age groups
delivery forms
Ampoules Assortment 25 x 1 ml 533294
Ampoules, var. accessories
Refill 50 x 1 ml 533293
Ampoules, var. accessories
VivAmpouleAssortment, var. accessories 20 x 0.4 ml 550578
Refill, var. accessories 40 x 0.4 ml 550579
fluor Protector Gel Strengthens teeth with calcium plus phosphate plus fluoride
Fluor Protector Gel offers teeth intensive and at the same time gentle care.
recommended applications:ā Special dental care to protect against caries, erosive wear and
periodontal diseaseā Sensitive teethā Exposed tooth necksā Patients with acidic dietsā Patients with dry mouthā During orthodontic treatmentā After professional tooth cleaningā During tooth whitening
advantages:ā Calcium + 1450ppm fluoride + phosphate protect the teeth from
acid attacks.ā Xylitol inhibits the growth of cariogenic bacteria.ā D-panthenol is soothing to the gums.
delivery forms
Fluor Protector Gel 1 x 20 g 628437
1 x 50 g 628436
3938
delivery forms
Intro Pack 559320
Heliobond, Total Etch, Skyce Refill crystal small,+ Refill crystal large, var. accessories
Refill cristal small 5 x 559321
Refill cristal large 5 x 559322
To o t h J e w e l l e r y
skyceĀ®
Crystal glass ornaments that are bonded to the labial surfaces of natural upper anterior teeth without previous preparation.
skyce is available in 2 sizes:Approx. 1.9 mm and 2.4 mm
shade:Crystal
C l i n i c a l A c c e s s o r i e s
delivery forms
Refill 50 x (5 x 10) 612600
optrastickĀ®
OptraStick is a flexible placement instrument which features a ball-shaped, flexible adhesive tip. The tip allows small objects, inlays, onlays and veneers (e.g. made of a IPS EmpressĀ®, IPS e.maxĀ®) to be picked up, held, carried and placed quickly and easily.
advantages:ā Easy pick-upā Strong adherenceā Secure positioning
optrafineĀ®
High performance, multiple-use diamond polishing system for CAD/CAM and lab-fabricated ceramic materials.
shapes:ā Flameā Cupā Discā Nylon brushes and diamond polishing paste for high-gloss polishing
Indication:High-gloss polishing of dental ceramic restorations
advantages:ā Especially designed for ceramic materialsā Particularly smooth restoration surfacesā High wear resistanceā Autoclavable and reusable
delivery forms
Assortment 601989
F Flame, F Cup, F Disc 2 x each P Flame, P Cup, P Disc 2 x each HP Nylon Brush 6 x HP Polishing Paste 1 x
Refill OptraFine F (light blue)
Flame 10 x 601994
Cup 10 x 601990
Disc 10 x 601992
Refill OptraFine P (dark blue)
Flame 10 x 601995
Cup 10 x 601991
Disc 10 x 601993
Refill OptraFine HP Nylon Brush 10 x 602288
Refill OptraFine HP Polishing Paste 1 x 602289