construction - rs industrial services

CONSTRUCTION

Section Page

Construction Equipment 248-249

Trowels 250-253

Shovels & Forks 253-256

Bolsters & Chisels 257-261

Brickwork Tools 262-263

Pry & Wrecking Bars 263

Hammers & Picks 264

Striking Tools 264

Scaffold Tools 264-265

Construction Tools 265-266

Builders Buckets 266

Traffic Management 267-269

Laser Levels 269-271

Cable Reels & Splitters 272-273

Transformers 273

Site Lights 273-276

Fall Arrest 276-277

Steps, Ladders & Platforms 277-286

248

Co

nstr

ucti

on

248

CONSTRUCTION EQUIPMENT

• Compact and portable for easy transportation

• Mixes a full barrow load of concrete and mortar

• Complete with barrow height swivel stand

• Proven robust and durable design with extrathick drum

• Designed for hire and professional use

Minimix 150 Pro/Rental Cement Mixers

List PriceCode Description (exc VAT)

M16B 230v cement mixer £286.95

M12B 110v cement mixer £308.51

M50B Honda cement mixer £501.33

• 2 speed heavy duty high torque gearbox forextra life

• Large heavy duty motor for higher powerand more torque

• Ergonomic handles for operator comfortand reduced fatigue

• Soft start motor for more control andreduced splashing

• Electronic speed control to ensureconstant speed

• Complete with paddle

Promix Professional Mixer/Stirrers

List Price Code Description (exc VAT)

PROM01 1,200w 110v £170.40

PROM02 1,200w 230v £170.40

PROM03 1,600w 110v £190.64

PROM04 1,600w 230v £190.64

• Engine protection frame provides a lifting point

• High quality vibrator

• Greater travel speed for improved productivity

• Handle folds flat for transport and storage

• Lowest hand-arm vibration in its class: 2.42M/sec2

PCLX 320 Light Professional Honda Plate Compactor

List PriceCode (exc VAT)

LC3201 £830.70


• Ideal for occasional site use and keen DIYers

• Mixes a full barrow load of concrete or mortar

• Complete with barrow height swivel stand

• 230v purpose built integrated motor forreliability

230v Minimix 130


ME23 £227.90

• Professional, heavyweight compaction plate

• Low Hand Arm Vibration design for longersafe usage times

• 16.5kN high performance vibration unit forhigh compaction and good travel speed

• Wrap around frame for engine protectionand manual handling points

• Self cleaning base plate

PCX 400 Compaction Plate


PC4000 Honda Compaction Plate £977.67

OPP/28/DIO Paving Pad £56.00

• High performance ‘free screeding’ machinedesigned for leveling and vibrating concretewithout the need to run on formwork

• Easy removal and reversing of the beam allowsstriking off along traditional formwork

• Adjustable centrifugal force for different beamlengths and concrete slumps

• Height adjustable handles for operator comfort

• 7 beam lengths available from 1.5 – 5M to suitapplication

• High performance ‘free screeding’ machinedesigned for leveling and vibrating concretewithout the need to run on formwork

• Easy removal and reversing of the beam allowsstriking off along traditional formwork

• Adjustable centrifugal force for different beamlengths and concrete slumps

• Height adjustable handles for operator comfort

• 7 beam lengths available from 1.5 – 5M to suitapplication

Easy Screed Pro


157.9.010 Drive Unit (Honda) £1,427.10

157.3.000 Beam 1.5M £202.35

157.3.002 Beam 2.5M £346.13

157.9.003 Beam 3M £426.00

157.9.005 Beam 4.25M £633.68

157.9.006 Beam 5M £729.53

249

Co

nstru

ctio

n

249

CONSTRUCTION EQUIPMENT

4x4 Minidumper

• 4x4 drive system for extreme conditions

• 300Kg payload

• 4 forward and 1 reverse gear for excellentcontrol and high productivity

• Compact size and perfect weightdistribution for ease of control

• Extremely robust and durable

• Optional extras include flatbed, skip loadingramps, towing attachment and turf tyres

List Price Code (exc VAT)

BMD01 £2,651.85

• Lightweight and compact for ease of handling

• High impact motor housing for high durability

• High frequency vibration for productivity

• Interchanagble heads and flexes

• 3M shaft

• Complete with shoulder strap

Megavib+ 36mm Poker Kit

List PriceCode Voltage (exc VAT)

MGP1 110 £547.59

MGP5 230 £547.59

Belle-Clean Concrete Dissolver

• 100% biodegradable concrete dissolver

• Non–corrosive and non–hazardous toequipment

• For cleaning set concrete from mixers,screeds, pumps, saws, etc

• Also for use on patios, vehicles, woodendecks and much more


CD00650 1 x 750ml spray bottle £17.90

CD15650 15 x 750ml spray bottle £268.46

CD19000 19ltr drum £260.90

• Heavy duty block splitter designed to cut allcommon types of block paving

• Easy to adjust block size with large thread,single screw adjuster

• High performance split achieved through camaction and extra long handle

• Lock down handle and wheels for easywheeling

Maxipave Block Splitter


MBS08 £318.44

Easy Bull Float

• Lightweight magnesium allow blade forimproving surface durability, finish andquality by reducing surface laitance

• Rounded corners on float head to reducetrack marks when floating

• Robust heavy-duty design for tough siteconditions and rental fleets

• 3 extension handles included allowing up to6M bays to be floated


50901 £266.25

• Rail mounted sliding cutting head

• Adjustable rail for bevel cutting and movablehead for plunge cutting

• Large table allows for cutting of tiles up to650mm

• Electric water pump for blade cooling anddust suppression

• Quick and easy to set up with integratedfolding legs

Maxitile 260


156.9.010 230v £596.00

156.9.011 110v £621.00

• Durable and robust Honda petrol drive unitwith protection frame


• Industry standard Two Dog drive coupling

• Fitted with speed limitation to prevent overrevving of engine

• Various poker head sizes available from 25 - 68mm

BGA Honda Petrol Poker Kit


BGA1 25mm Poker Kit £822.18





250

Co

nstr

ucti

on

250

TROWELS

• Crafted from the finest carbon steel, solidforged for supreme strength

• Reflecting popular trends, blades are nowlighter and more flexible

• Taper ground, hardened and spring tempered

• The handle angle has been optimised toreduce wrist strain and improve knuckleclearance

• Handles are available in a number ofmaterials and shapes to reflect personalpreferences

Brickwork Trowels

Blade List PriceCode Description Size (") (exc VAT)

WHS Premier – Soft Feel Handles

10110SF-08 Broad heel 10 £21.79

10111SF-08 Broad heel 11 £21.79

10112SF-08 Broad heel 12 £21.79

10313SF-08 London 13 £21.79

10710SF-08 Philadelphia 10 £21.79




11104SF-08 Pointing 4 £13.07

11105SF-08 Pointing 5 £13.07

11106SF-08 Pointing 6 £13.07

20105SF-08 Pointing broad 5 £13.07

20106SF-08 Pointing broad 6 £13.07


WHS Premier – Leather Handles

10712LE-08 Canadian 12 £30.51

10811V-08 Canadian 11 £30.51

WHS – Trowel Range

10110V-08 Broad heel 10 £19.61

10111N-08 Broad heel 11 £19.61

10111BW-08 Broad heel with long handle 11 £19.61

10111CA-08 Broad heel with cellulose acetate handle 11 £19.61

Trowels

10112Q-08 Broad heel 12 £19.61

20212V-08 Broad heel long with large wood capped handle 12 £19.61

20212CA-08 Broad heel with cellulose acetate handle 12 £26.80

10117S-08 Broad heel (left hand) 12 £19.61

10312CA-08 London with cellulose acetate handle 12 £19.61

10711A-08 Philadelphia with long wood capped handle 11 £19.61

10711CA-08 Philadelphia with cellulose acetate handle 11 £19.61

10712CA-08 Philadelphia with cellulose acetate handle 12 £19.61

11104ARCH Pointing 4 £11.98

11105N-08 Pointing 5 £11.98

11106Q-08 Pointing 6 £11.98

20105H-08 Pointing broad 5 £11.98

20106B-08 Pointing broad 6 £11.98

11106SF-08

20106SF-08

10811V-08

10110V-08

20212V-08

10711CA-08

20106B-08

10111SF

10112SF

Brickwork Tools

• Brickwork tools for the price conscious professional or jobbing builder

• Designed for hard wearing performance, comfort and ease of use

Size List Price Code Description (") (exc VAT)

Wooden Handle

10510B Broad heel brick trowel 10 £5.02

10511B Broad heel brick trowel 11 £6.05

10511P Philadelphia 11 £6.05

10505P Pointing trowel 5 £2.55

10506P Pointing trowel 6 £2.79

10607W Brick jointer 4 £6.41

10565B Bucket trowel 61⁄2 £6.05

Soft Feel Handle

11610BSF Broad heel brick trowel 10 £12.02

11611BSF Broad heel brick trowel 11 £12.02

11611PSF Philadelphia 11 £12.02

11606PSF Pointing trowel 6 £7.23

Brick

Pointing

Bucket

Broad

Heel

251

Co

nstru

ctio

n

251

TROWELS

Plastering Trowels

• Tension rolled for longitudinal rigidity toensure consistent application

• The blades are also cross ground for dragreduction and easy material flow

• The blades are factory set to ensure correctdishing and include steel rivets for strength

Blade List Price Code Description Size (") (exc VAT)

Tyzack

11400N Finishing 11 £23.97

11458S Stainless steel finishing 11 £23.97

13113F Finishing 13 £23.97

13458S Stainless steel finishing 13 £23.97

13013N Finishing 13 £23.97

13314C-08 Floor 14 £23.97

13858N Floor 16 £23.97

18458R Floor 18 £23.97

11506L/08 Gauging 6 £16.34

11507N/08 Gauging 7 £16.34

11508H/08 Gauging 8 £16.34

15800C/08 Tiling trowel 61⁄2 £19.61


Tyzack Premier

13000U-08Laying on 101⁄2 £29.21

13100R Finishing single hang 11 £27.24

13200J Finishing double hang 11 £27.24

21600W Stainless steel finishing 11 £27.24

13513F Finishing 13 £27.24

13514C Finishing single hang 14 £27.24

13300K-08 Cement 11 £27.24

15200W-08Cement edging 11 £27.24

13716K Flooring 16 £38.14

13718G Flooring 18 £43.59

14500X Adhesive (1.5 x 5mm notches) 11 £27.24

14510Y Adhesive blade 11 £9.73

14600Y Adhesive (2 x 6mm notches) 11 £27.24

14610Z Adhesive blade 11 £9.13

13000U

13513F

14600Y

16412N-03

21600W

Ready To Go Plastering Trowels

• Pre-worn to professional standards

• Pre-worn edges

• Radiused corners

• Craftmen set

• Tension rolled

Size List Price Code Description Handle (") (exc VAT)

14458BIN Stainless steel Beech 14 £26.15

14113BISF Carbon steel Soft feel 14 £29.42

14513BIN Carbon steel Beech 14 £26.15

14458BISF Stainless steel Soft feel 14 £29.42

Size List Price Code Description Handle (") (exc VAT)

13458BIN Stainless steel Beech 13 £26.15

13113BISF Carbon steel Soft feel 13 £29.42

13513BIN Carbon steel Beech 13 £26.15

13458BISF Stainless steel Soft feel 13 £29.42

Plastering, Flooring and Mastic Trowels

• Tools for the price conscious professional orjobbing builder

• Ideal for plastering, flooring and cementwork, with 2 blade lengths and a choice ofhandles

• All quality guaranteed and designed forstrength and ease of use


10611W Carbon plastering wooden handle 11 £12.02

10611CSF Carbon plastering soft feel handle 11 £6.11

10611SF Stainless plastering soft feel handle 11 £20.78

10614W Carbon plastering wooden handle 14 £13.42

10608SF Mini finishing soft feel handle 8 £10.89

10507G Gauging wooden handle 7 £3.49

11607GSF Gauging soft feel handle 7 £8.39

10606U Aluminium plastic hawk 12 £14.81

100565B Bucket trowel wooden handle 61⁄2 £6.05

106FLR Flooring trowel plastic handle 14 £13.77

106MAS Mastic trowel plastic handle 11 £11.89

TILT6MM Tiling trowel 6mm square notch soft feel handle 11 £6.49

10611P Plastering trowel 11 £11.43

10611W

106FLR

252

Co

nstr

ucti

on

252

TROWELS


12712H-NEW Professional hawk 12 x 12 £18.67

12012N-08 Leaf and square 1⁄2 £20.01

12312D Trowel and square 1⁄2 £20.01

708T Plastic hawk 13 x 13 £17.39

11806X-08 Harling trowel 61⁄2 x 61⁄2 £22.88

11904U-08 Angle trowel 21⁄2 x 4 £25.96

17100Z-08 Square external trowel 31⁄2 x 2 £24.48

17300T-08 Square internal trowel 31⁄2 x 2 £27.80

700Z Wooden float straight 11 £7.63


702L Plastic float 133⁄4 £7.90

704N Sponge float 9 x 4 £8.45

705P Grout applicator 9 x 4 £8.45

702S Plastic float 16 x 4 £5.70

FE6 Plasterers feather edge 72 £28.12



ENDCAP 2 end caps for feather edge £3.00

Plastering and Flooring Tools

Drylining Tools

• A comprehensive range of drylining toolsfeaturing quality products at competitiveprices

• This range has been developed to meet thegrowing needs of the drylining market

• Utilises improved technology and materialsto achieve a more consistent and fasterplastering solution to both new build andrenovation


717E-05 Taping knife 12 £11.29

710X-05 Mixing paddle £6.33

720H-05 Telescopic pole sander £18.18

713A-05 Support prop £12.57

10565BSF-08Bucket trowel £5.97

721J Lath hammer steel £13.91

722K Scarifier tyzack-drywall £7.44

723L Long handle broad knife-tyzack drywall £9.27

13314CSF-08Finishing trowel 14 £27.24

13514SSF-08 Stainless steel finishing trowel14 £27.24

13858NSF-08Cementing trowel 16 £27.24

18458RSF-08Cementing trowel 18 £27.24


90911B-08 Finishing trowel 11 £23.97

90914A-08 Finishing trowel 14 £23.97

91911S-08 Stainless steel finishing trowel 11 £23.97

714B-05 Internal corner trowel £8.79

715C-05 External corner trowel £8.79

709W-05 Hand sander £10.51

74-PBSR-06 Utility saw 31 £7.12

712Z-05 Board lifter £11.42

711Y Panel carrier £6.41

718F-05 Jointing knife 4 £7.38

719G-05 Jointing knife 6 £7.98

716D-05 Taping knife 10 £9.64

709W

712Z

711Y

714B

720H 74-PBSR

719G

717E

• Innovative comfort grip handle • Designed for hardwearing performance

Brickwork Trowels

List Price Code Description Size (exc VAT)

AT10020 Philadelphia brick trowel 11" £7.94

AT10025 Pointing trowel 5" £3.99

AT10026 Pointing trowel 6" £4.15

AT10030 Gauging trowel 7" £4.37

AT10060 Bucket trowel 7" £5.80

AT10063 Window/margin trowel 12mm £2.35




AT10020

AT10025

AT10030

AT10060

• Innovative comfort grip handle • Designed for hardwearing performance

Plastering Trowels


AT10001 Steel plastering trowel 11" x 41⁄2" £9.72

AT10002 Steel plastering trowel 14" x 43⁄4" £12.00

AT10005 Stainless steel plastering trowel 11" x 41⁄2" £11.16

AT10010 Steel notched trowel 11" x 41⁄2" £9.96

AT10015 Steel flooring trowel 16” £12.72

AT10061 Internal corner trowel 120mm £5.95

AT10062 External corner trowel 120mm £5.95

AT10001

AT10010

AT10062

253

Co

nstru

ctio

n

253

TROWELS

Length Blade Width List PriceCode Part No Description (mm) (mm) (exc VAT)

43360 AS11/SG2 Adhesive spreading 280 120 £13.04

43358 BT11/SG2 Philadelphia brick 280 £11.66

43355 FT/SG2 Flooring 400 110 £14.44

43359 GT/SG2 Gauging trowel* 175 £8.50

43361 PT11/SG2 Plastering 280 120 £13.32

43362 PT18/SG2 Plastering 455 120 £16.48

43357 PT/SG2 Pointing* 150 £7.04

* Blade fixed to tang by heavy duty weld

• Expert quality

• Carbon steel blade hardened and temperedwith lacquered finish

• Blade firmly fixed to tang by 8 welded rivetsor heavy duty weld

• Special soft grip handle for user comfort

• Adhesive spreading trowel is serrated on 2 edges

43360

Soft Grip Trowels

43358

43355

43359

43362

Moulded Polypropylene Trowels

Length Blade Width List PriceCode Part No Description (mm) (mm) (exc VAT)

67144 T105A Adhesive spreading trowel 265 115 £7.50

67143 T104A General purpose trowel 265 115 £7.26

67144

67143

• Polished and lacquered Carbon steel blade

• Fusion welded with 5 rivets

• Moulded polypropylene handle

• Adhesive spreading trowel is serrated on2 edges

Length Blade Width List PriceCode Part No (mm) (mm) (exc VAT)

88594 9020SG 300 300 £18.04

• Expert quality

• Manufactured from sheet aluminium

• Detachable soft grip handle

• Expert quality

• For removing wet mortar from a bucket

• Deep swan neck handle and flat end blade

• Carbon steel blade hardened and temperedwith lacquered finish

• Blade firmly fixed to tang by heavy duty weld

• Special soft grip hand for user comfort

Length List Price Code Part No (mm) (exc VAT)

43356 BT/SG2 140 £5.64

Soft Grip Bucket Trowel

Aluminium Plasterers Hawk

• The choice of the professional offering acomprehensive range of tools forbricklaying, plastering, dry lining, tiling,concrete finishing and flooring

• Brick trowels are forged from a single pieceof high grade tool steel in Philadelphia andLondon pattern with various handle typesincluding the ever popular Durasoft grip

• The unique Permashape “broken in”finishing trowels are manufactured witheither stainless and carbon steel blades,available in a large range of sizes withwooden or Durasoft grip

• Please contact us for further details on ourMarshalltown range

Marshalltown TrowelsHARRISON & CLOUGH LTD

SPADES, SHOVELS & FORKS

• Pressed steel blade

• Fibreglass shaft

• Y-dee shaped moulded handle

Overall Length Blade Width Blade Length List PriceCode Part No (mm) (mm) (mm) (exc VAT)

57567 BSFG 940 240 320 £18.44

Square Mouth Fibreglass Shovel

254

Co

nstr

ucti

on

254

SHOVELS & FORKS

• Pressed mild steel blade

• Fibreglass shaft

• Y-dee shaped handle

• Ideal for work in restricted areas

Overall List Price Code Part No Length (mm) (exc VAT)

57569 BSRPFG 700 £14.92

Round Point Blade Mini Shovel

Solid Forged Shovels

• Solid forged socket


Blade Width Blade Overall Shaft (mm - widening Length Length List Price

Code Part No Type Type at base) (mm) (mm) (exc VAT)

64330 ASS-CL Cable laying Steel tubular 114 -125 280 1,010 £24.18

64331 ASNDS Drainage Steel tubular 405 1,100 £25.86

64327 ASS-SM Square mouth Steel tubular 250 300 1,000 £19.26

64328 ASS-TM Taper mouth Steel tubular 215 - 250 300 1,050 £19.26

64332 SMSSS-WH Square mouth Ash 250 300 940 £25.28

48426 TMSSS-WH/H Taper mouth Ash 215 - 250 300 940 £21.98

64332

64330

64331

48426

64327

64328

• Wood shaft

• Hardened steel socket

• V shaped blade


78430 ILHS 1,600 £14.26

Irish Pattern Long Handled Shovel

• All steel tubular shaft

• Solid forged tines and socket



64326 ASF 1,100 £25.24

Solid Forged Contractors Fork

• Established since 1740 the Company ofRichard Carter Ltd manufactures all types ofshovels

• Any length or type of handle in all materialsfrom wood, steel, fibreglass and plastic in T,YD or plain can be supplied

• Suitable for industry, agricultural, mining,DIY and telecommunication purposes, theproducts will meet full BSS specifications

Shovels and Forks

List PriceCode Description Shaft Size (") (exc VAT)

02OSEY No 2 open socket shovel 28" hardwood PYD 10 x 121/2 £7.50

2TSSMY No 2 taper mouth solid socket shovel Tubular steel MYD 81/2 x 101/2 x 121/2 £9.50

08ALAT No 8 open socket aluminium shovel 28" ash T 13 x 151/2 £15.00

4PMFTS 4 prong manure fork Tubular steel poly T 9 x 131/2 £9.20

09PFET 9 prong industrial ballast fork 28" hardwood T 9 x 13 £23.20

Shocksafe Polyfibre Contractors Tools

• The Richard Carter Ltd SHOCKSAFE range ofPolyFibre Insulated Tools provides fullconformity to the exact specifications ofBS8020

• The solid-forged fully insulated contractorstools are doubly protected by twin layers ofpolymer sheathing, moulded over the rigidfibreglass central core

• Every single tool is flash tested to 10,000vbefore the issue of a certificate, unique toeach implement, thus ensuring totaltraceability and guaranteeing full conformityto live-cable working specifications

• Guarantee of safety to the user, in apotentially dangerous live-workingenvironment

List PriceCode Description Shaft Size (") (exc VAT)

2TSSPFINS No 2 taper mouth solid socket shovel Polyfibre YD 81/2 to 101/2 x 121/2 £50.00

16SSPFINS Newcastle draining tool 16" Polyfibre YD 7 to 41/2 x 16 £54.00

POST54FGINS Post-hole digger (scissor) 54" Fibreglass 8 x 15 £105.00

60CPFGINS Crowbar chisel and point 60" Fibreglass 60 x 11/4 £62.50

255

Co

nstru

ctio

n

255

SHOVELS & FORKS

Replacement Handles

• Richard Carter Ltd manufactures a completerange of handles for most types of handtools, from file handles to long poles

• Imported best quality American Hickory andsource renewable and sustainable timbersfrom around the world

List PriceCode Description Size (") (exc VAT)

515H10 Hickory club hammer shaft 10 x 13/8 x 11/16 £1.08

525H36 Hickory sledge hammer shaft 36 x 13/4 x 11/4 £4.10

855E36 Hardwood navvy pick shaft 36 x 3 x 2 £3.25

540H36 Hickory felling axe shaft (21/2") 36 x 21/2 x 3/4 £7.10

911R72 Hardwood tapered broom handle 72 x 11/8 £2.60

All Steel Solid Socket Shovels

Open Socket Shovel

• Hot double roll formed from one singlepiece of best quality steel

• Solid socket is forged as an integral part ofthe blade

• Tool of choice for heavy industrial andcontracting work

• Metal handle provides extra strength andthe wooden cross piece allows for comfortand grip


AT56001 No 2 square mouth MYD £15.45

AT56002 No 2 taper mouth MYD £15.45

AT56004 Draining shovel MYD £20.95

AT56001

AT56002

AT56004

• Hot pressed from hot rolled heavy gaugecarbon steel

• Open socket shovel is used for moving looseearth, sand, grain and gravel

• Polypropylene handle provides greatercomfort and is weatherproof


AT56003 No 2 - 28" PYD £12.30

Fibrelite Shovels

• Lightweight, extremely strong, fire andwater-resistant

• The fibrelite shaft has insulating propertiescombined with a shorter socket length meansless likelihood of touching metal in use

• One piece manganese steel head

• Rounded corners means reduced risk ofdamage to pipes and cables

• PYD handle


2711TFL Fibrelite cable laying shovel £51.78

2753TFL Fibrelite newcastle draining shovel £56.68

2741TFL Fibrelite trenching fork £59.95

Insulated Shovels

• Conforms to BS8020:2002 for working on ornear conductor railway systems

• Individually tested to 10,000v andguaranteed to 1,000v

• Two layers of insulating material on shaft

• When inner yellow material shows through,user is warned tool needs replacement

• Integral hard stay on shaft to help preventuser’s hand from slipping onto forged head

• PYD handle


2029PF/INS Insulated square mouth shovel £92.30

2030PF/INS Insulated general service shovel £92.76

2159PF/INS Insulated contractors fork £94.62


2731TFL Fibrelite square mouth shovel £44.96

2701TFL Fibrelite trending shovel £51.78

2721TFL Fibrelite round mouth shovel £51.78

2702TFL Fibrelite taper mouth shovel £44.96


2026PF/INS Insulated trending shovel £90.91

2027PF/INS Insulated cable laying shovel £90.91

2028PF/INS Insulated taper mouth shovel £92.30

Strapped Shovel

• Strapped for extra strength and power

• Rivetted 3 times for added strength

• Solid forged, heat treated and tempered forquality performance and long life

• Epoxy coated head for reduced soil adhesion

HandleList Price

Code Description Type (exc VAT)

2136NM General service T £49.44

treaded shovel

2158BP

256

Co

nstr

ucti

on

256

SHOVELS & FORKS

• Up to 10 times stronger than timber shaftedshovels and up to 8 times stronger than steel

• Oil and chemical resistant

• Highly resistant to water, eliminating loosejoints from swelling and shrinking

• The head has an extra long socket for addedstrength and is solid forged, heat treatedand tempered for quality performance andlong life

• Epoxy coated for reduced soil adhesion

• Type MYD

Fibreglass Handled Shovels

Size List PriceCode Description (") (exc VAT)

2841AD/04 Square mouth £59.52

2831AL/04 Square mouth 2 £59.52

2801AV/04 Taper mouth 2 £59.52

2821AK/04 Round mouth 2 £59.52

2901AX/04 Trenching shovel £62.63

2911AL/04 Cable laying shovel £62.63

2861AP/04 Grafting tool £65.48

2872AN/04 Newcastle draining tool 16 £65.48

2871AQ/04 Draining tool £63.49

2811AN/04 General service treaded shovel £62.63

1841AH/04 Fibreglass contractors fork £70.24

Square

Taper

Grafting

Draining

Trenching

Tubular Steel Shovels

• Designed for maximum strength, the uniquemethod of manufacture ensures a strongcomfortable tool with a streamlinedcontoured shaft designed for comfort in use

• Automatically rotary welded to ensureperfect alignment of weld for maximumstrength

• The heads are solid forged, heat treated andtempered for quality performance and longlife

• Epoxy coated for reduced soil adhesion

Handle List Price Code Description Size Type (exc VAT)

2131GZ Grafting tool MYD £43.77

2153AA Newcastle draining tool 14" MYD £43.77

2153AE Newcastle draining tool 16" MYD £43.77

2154HK Draining tool 16" MYD £43.77


2002AR Square mouth 2 MYD £38.12

2000AC Taper mouth 2 MYD £38.12

2001AD Round mouth 2 MYD £38.12

2006AP Trenching shovel MYD £41.04

2007AP Cable laying shovel MYD £41.04

2000AC

2007AP

2153AA

2154HK

Open Socket Shovels

• Supplied with a hard wood shaft formaximum strength and comfort in use

• High quality Carbon steel blades secured byan aluminium rivet for maximumperformance and stability


2521NC Square mouth 6 T £23.90

2521WE Square mouth 6 PYD £23.90

2530BW West country shovel 54" LK £26.18

2540HU Irish shovel 54" LK £26.18

2540JV Irish shovel 60" LK £28.48


2521AU Square mouth 2 T £20.47

2521UA Square mouth 2 PY £20.47

2531UH Square mouth 2 LK £23.90

2521HT Square mouth 4 T £22.20

2521VC Square mouth 4 PYD £22.20

2530BW

2521VC

2521AU

Solid Socket Shovels Range

• Supplied with extra long sockets for addedstrength at the tools potentially weakest point

• Solid forged, heat treated and tempered forquality performance and long life

• The head is epoxy coated for reduced soiladhesion


2040ST Round mouth 2 MYD £34.32

2026BA Trenching shovel T £38.35

2026AG Trenching shovel MYD £38.35

2027AC Cable laying shovel MYD £38.35

2064GH Square mouth (flat) shovel T £31.49

2064FD Square mouth (flat) shovel MYD £31.49


2061TP Square mouth 000 T £34.32

2061MP Square mouth 000 MYD £34.32

2029AV Square mouth 2 T £33.38

2029RW Square mouth 2 MYD £33.38

2028AZ Taper mouth 2 T £33.38

2028RS Taper mouth 2 MYD £33.38

2061MP

2028AZ

2026BA

2040ST

Contractors Forks

• Feature heavy duty square prongs withchisel points making them ideal for diggingin solid clay and stony ground

Handle List Price Code Description Type (exc VAT)

1710AW Tubular lightweight contractors fork MYD £49.47

1700AV Tubular contractors fork MYD £53.44

1702AA

257

Co

nstru

ctio

n

257

BOLSTERS & CHISELS

Flat Cold Chisels

Size List Price Code List PriceCode (mm) (") (exc VAT) With Safety Grip (exc VAT)

C261-0001 100 x 6 4 x 1⁄4 £2.79

C261-0002 150 x 6 6 x 1⁄4 £2.93

C261-0003 150 x 10 6 x 3⁄8 £3.15

C261-0004 150 x 13 6 x 1⁄2 £3.09

C261-0005 200 x 13 8 x 1⁄2 £3.27

C261-0006 250 x 13 10 x 1⁄2 £3.48 C261-0006G £7.20

C261-0007 175 x 16 7 x 5⁄8 £3.96

C261-0008 250 x 16 10 x 5⁄8 £4.37 C261-0008G £8.09

C261-0009 200 x 19 8 x 3⁄4 £5.31

C261-0010 250 x 19 10 x 3⁄4 £5.78 C261-0010G £9.50

C261-0011 300 x 19 12 x 3⁄4 £6.23 C261-0011G £9.95

C261-0012 450 x 19 18 x 3⁄4 £8.01 C261-0012G £11.73

C261-0013 250 x 22 10 x 7⁄8 £7.22 C261-0013G £10.94

C261-0014 200 x 25 8 x 1 £7.32

C261-0015 225 x 25 9 x 1 £8.01 C261-0015G £11.73

C261-0016 250 x 25 10 x 1 £8.46 C261-0016G £12.18

C261-0017 300 x 25 12 x 1 £9.14 C261-0017G £12.86

C261-0018 450 x 25 18 x 1 £11.90 C261-0018G £15.62

C261-0019 600 x 25 24 x 1 £15.27 C261-0019G £18.99

Brick Bolsters

Size List Price Codes List PriceCode (mm) (") (exc VAT) With Safety Grip (exc VAT)

C261-0020 75 3 £11.52 C261-0020G £15.24

C261-0021 100 4 £13.29 C261-0021G £17.01

Electricians Floor Chisel


C261-0022 56 21⁄4 £7.88 C261-0022G £11.60

Concrete Points


C261-0024 225 x 5 9 x 3⁄16 £6.59 C261-0024G £10.31

C261-0025 300 x 5 12 x 3⁄16 £7.70 C261-0025G £11.72

Masons Hammer Head Bolsters

Grooved Plugging Chisel

List Price Code List PriceCode Size (exc VAT) With Safety Grip (exc VAT)

C261-0023 GPC £8.66 C261-0023G £12.38

Masons Hammer Head Pitching Tools

Size List Price Code (mm) (") (exc VAT)

C261-0031 213 x 75 81⁄2 x 3 £20.52


C261-0029 213 x 50 81⁄2 x 2 £15.09

C261-0030 213 x 63 81⁄2 x 2

1⁄2 £17.24


C261-0028 213 x 75 81⁄2 x 3 £20.52


C261-0026 213 x 50 81⁄2 x 2 £15.09

C261-0027 213 x 63 81⁄2 x

1⁄2 £17.24

258

Co

nstr

ucti

on

258

BOLSTERS & CHISELS

Conical Head Chisels

• Manufactured from chrome vanadium


C641-0007 250 x 22 10 x 7⁄8 £9.35

C641-0008 200 x 25 8 x 1 £9.63

C641-0009 225 x 25 9 x 1 £10.17

C641-0010 250 x 25 10 x 1 £10.76

C641-0011 300 x 25 12 x 1 £11.85


C641-0001 150 x 10 6 x 3⁄8 £3.90

C641-0002 150 x 13 6 x 1⁄2 £3.95

C641-0003 200 x 13 8 x 1⁄2 £4.19

C641-0004 175 x 16 7 x 5⁄8 £4.91

C641-0005 200 x 19 8 x 3⁄4 £6.83

C641-0006 450 x 19 18 x 3⁄4 £9.42

Conical Head Chisels

• Manufactured from chrome vanadium


Crosscut

C642-0001 150 x 6 6 x 1⁄4 £5.69

C642-0002 200 x 10 8 x 3⁄8 £9.30

Half Round

C643-0001 150 x 6 6 x 1⁄4 £6.15


C643-0002 200 x 10 8 x 3⁄8 £9.99

Diamond Point

C644-0001 150 x 6 6 x 1⁄4 £7.28

C644-0002 200 x 10 8 x 3⁄8 £10.88

Crosscut

Diamond Point

Half Round

Scutch Comb Holders


C263-0001 25 1 £13.50

C263-0002 38 11⁄2 £15.00

Safety Grips

SSP Code (exc VAT)

C261-0032 £3.72

Droves for Comb Holders


C263-0005 25 1 £0.39

C263-0006 38 11⁄2 £0.54

Combs for Comb Holders


C263-0003 25 1 £0.39

C263-0004 38 11⁄2 £0.57

Bolsters with Hand Guards

• Forged blade with ground cutting edges andoctagonal shank

• Impact absorbing hand protection grip

• Handle colour may vary

• 63752 - for levering up and cutting tonguesand grooves of floorboards

• 63730 - for cutting bricks and compositeblocks

Overall Length Blade Width List PriceCode Part No (mm) (mm) (exc VAT)

63752 BD8G/A 225 60 £7.88

63730 BD6G/A 225 75 £8.30

63733 BD6G/A 225 100 £9.74

63752

63730

259

Co

nstru

ctio

n

259

BOLSTERS & CHISELS

• Fluted angled blade to remove mortarbetween bricks

• Octagonal shank with ground cutting edge


78084 BD7/A 225 £4.60

• Octagonal shank chisel manufactured fromselected steel with polished cutting edge

• *Impact absorbing hand protection grip -handle colour may vary

Length Blade Width List PriceCode Part No (mm) (mm) (exc VAT)

63747* BD5G/A 250 19 £8.04

63748* BD6G/A 300 25 £12.72

63735 BD5/A 100 10 £1.80

63737 BD5/A 150 13 £2.62

63739 BD5/A 200 19 £4.70

63741 BD5/A 250 19 £5.12

63743 BD5/A 250 25 £8.24

63739

63747

• Octagonal shank chisel with recessed end toaccept toothed or plain edge scutches

• Complete with replaceable comb scutch

Overall Length Blade Width List PriceCode Part No (mm) (mm) (exc VAT)

78203 BD5C/A 200 25 £6.98

Cold Chisels

Plugging Chisel

Scutch Holding Chisel

Domed Head Brick Bolsters

• Carbon steel one piece drop forging

• Anti-mushroom head and a strengthenedneck for a longer working life

• The 41/2" has 3 ribs for added strengthmaking it virtually indestructible

• 1237 range has strong hi-visibility protectiveplastic moulded grip for added safety

Size List PriceCode Model (mm) (“) (exc VAT)

123603 1236 75 3 £7.45

123604 1236 100 4 £8.69

123645 1236 114 41⁄2 £10.60

123703 1237 75 3 £10.06

123704 1237 100 4 £11.32

123745 1237 114 41⁄2 £13.24

1236

1237

Domed Head Cold Chisels

• Carbon steel cold chisels are for use onstone, brick and other similar materials

• Forged with strong tapered blades

• Applications include shaping, cutting and chipping of stonework

• 591 models are available with a strong hi-visibility protective plastic moulded grip foradded safety

Size List PriceCode Model (mm) (") (exc VAT)

129082†

590 450 x 25 18 x 1 £9.69

129089†

590 600 x 25 24 x 1 £13.45

129131 591 200 x 19 8 x 3⁄4 £6.75

129140 591 230 x 22 9 x 7⁄8 £7.87

129148 591 250 x 19 10 x 3⁄4 £7.65

129149 591 250 x 25 10 x 1 £8.95

129150 591 300 x 25 12 x 1 £9.65

*Have anti-mushroom head†Have conical shaped head


129014* 590 150 x 12 6 x 1⁄2 £2.86

129022 590 175 x 16 7 x 5⁄8 £3.20

129031* 590 200 x 19 8 x 3⁄4 £3.95

129040* 590 230 x 22 9 x 7⁄8 £5.06

129048* 590 250 x 19 10 x 3⁄4 £4.83

129049* 590 250 x 25 10 x 1 £6.14

129058* 590 300 x 25 12 x 1 £6.82

129071†

590 400 x 25 16 x 1 £8.33

129081†

590 450 x 19 18 x 3⁄4 £6.82

590

591

260

Co

nstr

ucti

on

260

BOLSTERS & CHISELS

Flooring Chisels


120001 2700 230 x 16 x 57 9 x 5⁄8 x 21⁄4 £5.71

120102 2701 230 x 16 x 57 9 x 5⁄8 x 21⁄4 £8.35

• Carbon steel with a hardened and temperedblade

• Forged with a domed anti-mushroom head

• The traditional tool for lifting floor boards,chasing plaster, etc

• Not suitable for use on concrete or stone

• 2701 model available with a strong hi-visibility protective plastic moulded grip foradded safety

2701

2700

Carpet Fitters Bolster

• Carbon steel one piece drop forging,rounded edges

• Highly polished and chrome plating makes it ideal for use when fitting carpets


123803 1238 75 3 £9.45

Scutch Chisels

Plugging Chisels

• Carbon steel grooved plugging chisel

• Ideal for removing the mortar and cementfrom between brick and blockwork

• Forged with a domed anti-mushroom head

• Cutting edge is wider than the blade to giveclearance, and the groove enables a fastdischarge of debris

• 1861 model available with a hi-visibilityprotective plastic grip for added safety

1860

• Designed for use with scutch bits andcombs intended for use when shaping stoneand brick work

• 579 model available with a hi-visibilityprotective plastic moulded grip for addedsafety


127801 578 25 1 £12.43

127815 578 38 11⁄2 £13.44

127916 579 25 1 £16.10

127924 579 38 11⁄2 £17.11579


126000 1860 265 x 16 x 6 101⁄2 x 5⁄8 x 1⁄4 £6.03

126100 1861 265 x 16 x 6 101⁄2 x 5⁄8 x 1⁄4 £8.63

Eclipse Cold Chisels

• A range of top quality cold chiselsmanufactured to BS specifications

• To resist “mushrooming” every chisel shankhead is specially shaped and cutting edgesare hardened for durability

• Flat chisels for general cutting and chippingof metals and for shaping, facing andcutting of stone work

List Price Code Size (") (exc VAT)

CB116M/07 18 x 3⁄4 £4.68

CB150E/07 8 x 1 £4.51

CB151V/07 9 x 1 £4.83

CB152R/07 10 x 1 £4.70

CB153H/07 12 x 1 £5.33

CB156N/07 18 x 1 £7.27

Concrete Points

CB292R/07 10 x 5⁄8 £2.29

CB313P/07 12 x 3⁄4 £2.87

CB353G/07 12 x 1 £3.93

Crosscut Chisels

CB534A/07 6 x 1⁄2 £1.94

CB556T/07 8 x 3⁄4 £3.44

Plugging Chisel

CB827V/07 10 x 5⁄8 £5.41

Floorboard Chisel

CB770K/07 9 x 5⁄8 x 21⁄4 £4.33


Flat Chisels

CB24A/07 4 x 1⁄4 £1.54

CB28G/07 6 x 1⁄4 £1.75

CB46T/07 5 x 3⁄8 £1.75

CB48E/07 6 x 3⁄8 £1.82

CB68V/07 6 x 1⁄2 £1.89

CB70H/07 8 x 1⁄2 £1.97

CB72F/07 10 x 1⁄2 £2.34

CB73N/07 12 x 1⁄2 £2.51

CB88R/07 6 x 5⁄8 £1.96

CB89H/07 7 x 5⁄8 £2.03

CB90M/07 8 x 5⁄8 £2.50

CB92N/07 10 x 5⁄8 £2.47

CB108D/07 6 x 3⁄4 £2.76

CB110T/07 8 x 3⁄4 £2.98

CB111G/07 9 x 3⁄4 £3.10

CB112E/07 10 x 3⁄4 £3.07

CB113V/07 12 x 3⁄4 £2.93

Concrete point

Plugging Chisel

261

Co

nstru

ctio

n

261

BOLSTERS & CHISELS

Brick Bolsters

• Available in 3" and 4" for the shaping andcutting of bricks

• 100V/07 has rubber grip


CB730K/07 9 x 3⁄4 x 3 £5.74

CB740K/07 9 x 1 x 4 £6.67

100V/07 9 x 1 x 4 £12.62

CB740K

100V/07

• A range of popular chisels complete with hand guard for protection


22-509R/07 Guarded floorboard chisel £7.55

22-639R/07 3" brick cut chisel £8.14

22-649R/07 4" brick cut chisel £8.94


22-208R/07 Guarded flat chisel 8 x 3⁄4 £5.49

22-210R/07 Guarded flat chisel 10 x 1 £6.99

22-310R/07 Guarded concrete point £4.81

22-410R/07 Guarded plugging chisel £7.96

Guarded Chisels

22-310R/07

Masons Pitching Tool

• Used for the preparation of stone for building

• Flat side enables smooth dressing of stone

• Sharp edge to take heavy blows for cleansmooth stonework


SJ-MCT £10.15

Electrician’s Bolsters

Brick Bolsters

• Forged from cast carbon steel

• Designed for cutting tongue fromfloorboards


AT28040 21⁄4 £4.32

AT28035 21⁄4 – with hand guard £7.54

• Forged from cast carbon steel

• Designed for cutting of brick, stone andpaving

• Hand guard gives greater user safety andcomfort


AT28041 3 £5.74

AT28042 4 £6.66

AT28025 3 – with hand guard £8.45

AT28026 4 – with hand guard £8.95

Flat Cold Chisels

• Forged from carbon steel • Designed for cutting brick, stone and paving


AT28016A 3⁄4 x 12 £3.95

AT28016B 3⁄4 x 18 £5.95

AT28017 1 x 10 £5.15

AT28018 1 x 12 £5.95

AT28018A 1 x 18 £8.25

AT28018B 1 x 24 £10.25

AT28030 1x10-with hand guard £8.55


AT28005 1⁄4 x 4 £1.65

AT28007 1⁄4 x 6 £1.85

AT28009 3⁄8 x 5 £1.85

AT28010 3⁄8 x 6 £2.05

AT28011 1⁄2 x 6 £2.25

AT28013 1⁄2 x 8 £2.45

AT28015 3⁄4 x 8 £3.20

AT28016 3⁄4 x 10 £3.40

Plugging Chisel

Scutch Chisels

• Forged carbon steel

• Designed for removal of mortar and cementfrom brickwork


AT28020 10 £5.20

• Forged carbon steel

• Designed for stone dressing

• Use in conjunction with scutch combs


AT28050 1 £7.65

AT28051 11⁄2 £8.44

262

Co

nstr

ucti

on

262

BRICKWORK TOOLS

Solid Brass Plumb Bob

• Expert quality

• Precision machined solid brass

• Ideal for building or garden layoutapplications

• Comprising 2 impact resistant plastic linepins and Polyethylene line

Polyethylene Line Line Pin List PriceCode Part No Length (M) Length (mm) (exc VAT)

12399 D120 10 (approx) 150 £3.14

3 Piece Brick Line and Pin Kit

Nylon Line List Price Code Part No Length (M) (exc VAT)

60698 5188A 5 (approx) £5.64

Line Pins

• Drop forged and hardened for strength

• 620C model is a pair of Footprint line pins

• 620K is a set of 2 Footprint line pins, a brick jointer and a line

List PriceCode Model (exc VAT)

352001 620C £5.46

355005 620K £11.55

620C

Ancillary Tools for Brickwork


10505Z 1 x line and 2 x pins £4.63

21258B Convex brick jointer 1⁄2 x 5⁄8 £5.71

21238C Convex brick jointer 1⁄2 x 3⁄8 £5.71

707S Joint raker £12.46

Chalk Lines and Refills

List Price Code Size (g) Colour (exc VAT)

Chalk Refills

CHALK113 113 Blue £1.98

CHALK224 224 Blue £2.82

CHALK224RED 224 Red £2.82

CHALK224WHIT 224 White £2.82


Chalk Lines

COSMOSDCA Cosmos Suregrip – die cast aluminiumcase with finger lugs £13.43

COSMOSABS Cosmos ABS plastic case £9.78

MASON Mason line – Hi-vis yellow ABS durableplastic case £8.24

MINIRL Mini road line – Hi-vis yellow plastic case £22.38

COSMOSABS

MASON

CHALK224

• 30M/98ft line


10701S-08 2 Korner blocks and line £5.25

SJ-UK-50M-8W 50M bricklayers lines - white £2.35

SJ-UK-50M-8OY 50M bricklayers lines - orange & yellow £3.46

Fatmax XL Chalk Line

• Durable die cast aluminium housing withstainless steel hook and crank handle

• Quick gear release allows you to pull thecord without spinning the crank and has a5:1 gear rewind for quick rewind

• Patented chalk view means you can see howmuch chalk is left

Size List PriceCode Description (M) (ft) (exc VAT)

STA547480 30 100 £13.93

STA547482 With chalk 30 100 £15.32

Fatmax XL Chalk Line with Chalk and Marker

• Robust injection moulded case with rubberinserts for comfort and grip with a multi-position string locking mechanism

• The 3 to 1 gear rewind mechanism allowsfor fast rewind of the line which has a 20%larger line diameter than traditional chalkreels for better marking

• Patented chalk view means you can see howmuch chalk is left

Size List Price Code (M) (ft) (exc VAT)

STA547681 30 100 £16.10

263

Co

nstru

ctio

n

263

BRICKWORK TOOLS

Line Pins


C265-0001 £3.62

Pry or Pinch Bars

• Size: 19 x 450mm/3⁄4 x 18"


C264-0001 £11.69

PRY AND WRECKING BARS

Wrecking Bars


C262-0004 19 x 600 3⁄4 x 24 £15.54

C262-0005 19 x 750 3⁄4 x 30 £17.34

C262-0006 19 x 900 3⁄4 x 36 £19.94


C262-0001 13 x 300 1⁄2 x 12 £8.42

C262-0002 16 x 450 5⁄8 x 18 £10.91

C262-0003 19 x 450 3⁄4 x 18 £13.86

Wrecking Bars

• For dismantling timber work, case openingetc and removing nails

• Manufactured from selected steel

• Chisel end and swan neck

Size List Price Code Part No (mm) (exc VAT)

64846 BD9 450 x 16 £9.96

64854 BD9 600 x 19 £12.48

75513 BD9 760 x 18 £14.80

Cobra Wrecking Bars

• Superior high quality carbon steel

• Gives leverage of 90° allowingfor increased lift from its low profile


127112 571 300 12 x 5⁄8 £8.52

127118 571 450 18 x 5⁄8 £10.07

127124 571 600 24 x 3⁄4 £12.39

127130 571 750 30 x 7⁄8 £15.43

127136 571 900 36 x 7⁄8 £16.97

Brute Heavy Duty Wrecking Bars

• Heavy duty chisel blade offers increasedanchorage and strength, the wider, shallowclaw bar can be positioned under workpieceincreasing leverage and power

• Heat treated, forged steel for a more robust,durable bar


AT49001 14 £3.49

AT49002 24 £7.49

AT49003 36 £9.49

3 Piece Set

AT49000 14, 24 & 36 £19.99

3 Piece Crow Bar Set

Size List Price Code (") (exc VAT)

RIPPA 3PS 18 x 3⁄4 £16.69

Wrecking Bars

Size List Price Code (") (exc VAT)

RIPPA14 14 £2.77

RIPPA18 18 £4.63

RIPPA24 24 £6.49

RIPPA30 30 £8.34

RIPPA36 36 £9.27

CB974W

Length Width List PriceCode Part No (mm) (mm) (exc VAT)

30975 PB 355 35 £6.96

• Flat section with nail puller and chisel ends

• Forged from good quality carbon steel

• Hardened, tempered and painted black

Pry Bar/Nail Puller

264

Co

nstr

ucti

on

264

HAMMERS & PICKS

Mortar Pick Chisels and Points

• Ideal for removing old mortar from betweenbricks prior to re-pointing

• W098 model has 2 pointed ends

• W099 has chisel and pointed end

Weight List PriceCode Model (lb) (g) (exc VAT)

289812 W098 12 340 £14.47

289912 W099 12 340 £14.47

W098

W099

Hammers, Picks, Slashes and Axes

• Richard Carter Ltd provide a comprehensiverange of good quality striking tools

• All can be fitted with best quality hickory,hardwood or fibreglass handles

• Suitable for the most arduous of industrialpurposes

List PriceCode Description Shaft Size/Weight (exc VAT)

25LU10 Bright club hammer 10" hickory 21/2lb £4.18

20BP16 Engineers ball pein hammer 16" hickory 2lb £5.20

07DFFG Bright sledge hammer 30" hickory 7lb £12.80

GPSL36 General purpose ring & bolt curved slasher 36" hickory 22" blade £12.95

07NPCP Chisel and point navvy pick blade 7lb £6.90

3.2Kg Pick Axe Head and Shafts

• Forged steel

• Chisel and point pattern

• Accepts standard pick axe shafts

• Eye size: 70 x 50mm

Shaft Length List PriceCode Part No Description (mm) (exc VAT)

13702 6225 Pick axe head £13.90

35362 215A Hardwood shaft 900 £9.00

67288 215 Hickory shaft 915 £17.16

• For chopping tree roots and digging heavy soil

• Forged steel with chisel tip

• Accepts standard pick axe shafts

• Eye size: 70 x 50mm

Chisel Blade Width Shaft List PriceCode Part No Description Tip (mm) (mm) Length (mm) (exc VAT)

27590 CM Mattock head 65 100 £15.56

35362 215A Hardwood shaft 900 £9.00

67288 215 Hickory shaft 915 £17.16

2.27Kg Mattock Head and Shafts

STRIKING TOOLS

• Hammers for all trades forged from a singlepiece of high grade tool steel

• Claw hammers available in differentweights, lengths and patterns to suitindividual requirements

• Shock reduction grips are permanentlymoulded and bonded to the shaft and offersuperior comfort to reduce user fatigue

• Estwing also manufacture specialty toolsincluding geologists hammers, drywall

hammers, pry bars, brick laying hammersand axes

• The incredible Weight Forward hammerfeatures a drop forged steel head and afibreglass shaft, the weight of the tool hasbeen moved forward of the centre line toincrease power and efficiency

• Please contact us for further details on ourEstwing range

Estwing Striking Tools HARRISON & CLOUGH LTD

SCAFFOLD TOOLSScaffold Wrenches

List Price Code Size (exc VAT)

Straight Handle

SSS207 7⁄16" Whitworth £10.38

SSS208 1⁄2" Whitworth £10.38


Podger Handle

SSP207 7⁄16" Whitworth £14.18

SSP208 1⁄2" Whitworth £14.18

265

Co

nstru

ctio

n

265

SCAFFOLD TOOLS

CONSTRUCTION TOOLS

7/16" Rivetless Scaffold Spanner

• Super heavy duty

• Brand new unique rivetless design

• Broached from alloy steel to exact tolerances

• Each spanner is inspected and tested byhand with full tractability

• With hexagon and bi hexagon sockets

• Poker shaped handle including hole forsafety lanyard

• Available with stainless steel, aluminium andtitanium handles


PRI370716 £24.09

Scaffold Spanners

List PriceCode Marked Range (exc VAT)

Combination – Podger Handle Spanner

PRI320716 7⁄16" Whitworth £9.74

PRI32012 1⁄2" Whitworth £9.74

Spinner Spanner

PRI325-D/E 7⁄16" and 1⁄2" Whitworth £12.85

List Price Code Marked Range (exc VAT)

Standard Swingover Handle

PRI310716 7⁄16" Whitworth £7.01



PRI31022 22mm £9.26

Chunky Swingover Handle

PRI311716 7⁄16" Whitworth £7.32



Standard D/E Swingover

21mm 7/16" Whit Scaffolder Short Ratchet Podger

• Manufactured to exact specifications andthe best quality material

• Quality ratchet mechanism

• Reversible lever

• Thin design for easy access to confined nuts

• Hole in handle for safety rope


PRI601 £32.09

Hammers

• PRI340 produced from a one piece forgingfor strength and has a round taperedpodger for use on most system scaffolding

• PRI341 includes a hole in the head whichaccommodates any length of collar onscrew jacks

• PRI341 has integral nail puller

• PRI341 is solid forged striking headList Price

Code Description (exc VAT)

PRI340 Podger hammer £16.58

PRI341 System hammer £23.74

Scaffold Key

• Produced with a cranked taper squarepodger for use on eyebolts, jacking collarsand loop fixings

• Both ends of the tool are hardened toimprove the life of the tool


PRI315 London pattern £6.77

PRI315B Birmingham pattern £6.77

Ladder Tie

• To prevent theft and unauthorised removalof ladders

• All components are interlocked to preventrotation of locking clamp


PRI344 £9.73

Contractors Tools


5002AE 5lb grubbing mattock £26.33

5004AX 10lb square rammer wood handle £42.72

5007AB Fencing pin £7.12


3420BC Floor scraper 48 £20.47

3421AW Floor scraper blade £6.81

5000BT 7lb pick – chisel and point £19.89

5020AP 36" pick handle £18.62

3420BC

5000BT

266

Co

nstr

ucti

on

266

CONSTRUCTION TOOLS

Asphalt and Tarmac Rakes

• Both asphalt and tarmac rakes are availablewith wood and tubular handles

• Asphalt rakes feature 16 flat teeth andtarmac rakes 16 round teeth


3886AA Square tooth asphalt rake, wood handle £34.88

3886BC Square tooth tarmac rake, tubular handle £35.88

3887AE Tarmac rake, wood handle £34.88

3887AD Tarmac rake, tubular handle £35.88

• Tubular steel handle

• Square footprint

Overall Length Footprint Weight List PriceCode Part No (mm) (mm2) (Kg) (exc VAT)

64379 TT 1,140 135 4.5 £25.98

• Ash shaft

• Steel socket

• 16 round tooth head


64337 TR 1,670 £26.38

Tarmac Rake

Tarmac Tamper

Post Hole Digger

• For digging holes for posts

• Hardwood handles

• Hardened and tempered grab blades


64338 PHD 1,400 £20.36

Short Handle Tar Brush

• Ideal for applying tar, bitumin viscous andsimilar products


SHT £1.61

• Suitable for applying tar

Tar Brushes

Head Handle List PriceCode Description Size (mm) Length (mm) (exc VAT)

272.TB Short handled 100 x 60 (L x diameter) 210 £0.98

272.TBL Long handled 80 x 70 (L x W) 1,220 £2.15

BUILDERS BUCKETS

Gorilla Tubs

• Multi-purpose, highly flexible tubs

• Ideal for use in the home, garden, garageand workplace

• The extra large Gorilla tub is great formixing large batches of cement or plaster

• Colour: yellow - other colours are availableto special order


GORTUB14 Small £3.91

GORTUB26 Medium £5.49

GORTUB42 Large £7.38

GORTUB75 Extra large £14.44

• Heavy duty, impact and UV resistant

• Wire carry handle with rotating grip

• Wide pouring spout which provides morecontrol when pouring

14ltr Builders Bucket


BUCKET.01 £2.25

267

Co

nstru

ctio

n

267

TRAFFIC MANAGEMENT

• Offers exceptional value for money overlifetime use

• Complete with galvanised nuts, bolts andwashers which connect hinges, givingincreased rigidity and robustness

• Lamps are easily attached for additionalnight time visibility

• It is easily squared or linear sited and foldsfor efficient storage

• 5 standard lengths, based to suit

• Easy to site and easy to store in vehicles ordepots

Champion Folding Barrier Systems


KAC023-200-600 0.75M x 4 style £79.09

KAC033-200-600 1M x 4 style £87.40

KAC043-200-600 1.25M x 4 style £95.49

KAC053-200-600 1.5M x 4 style £99.75

KAC073-200-600 2M x 4 style £113.72

KEB000-100-000 Base (to suit - max of 4 required) £7.20

KEC000-000-000 Slimline Base as optional £6.97

• Robust mini barrier designed withcontractors in mind

• Each gate has a chapter 8 reflective toppanel, linked together with black clip on hinges

• Easily folds for quick deployment andlightweight for storage and handling

4-Gated Workgate Systems


KBC023-000-600 Red panels reflective (top) £76.44

KBC023-000-200 Yellow panels reflective £76.44

KEV000-001-100 Base to suit all of the above £6.45

Titan Barriers

• Stacking barrier which has many uniquefeatures

• Easy to use, assemble and store, available in1.5M or 2M lengths

• Titan has undergone extensive testing: windtunnel stability testing, sub zero impacttesting, accelerated UV age testing

• Height including feet 1.2M approx

• Dual colour coded systems for contractors'corporate ID

• Flexible toggles allow courtesy boards to beattached to barrier

• JSP can customise courtesy boards to allowfor both specific contractors/clientidentification and essential safety instructionto be displayed

• Courtesy boards can remain in place whilstthe system is folded away

• Roll-up flexible signs can also be used

List Price Code Size (M) (exc VAT)

KBA053-000-600 1.5 £51.11

KBA073-000-600 2 £58.40

• Lightweight yet sturdy, these post and chainsystems are available in a wide variety ofcolours

• Ideal as a crowd channeliser or to cordonoff an area

Chains, Posts and Bases

Link Chain List PriceCode Description Size (mm) Length (M) (exc VAT)

HDC000-265-400 Red/white chain 6 25 £14.68



HDE100-005-400 Red/white chain support post £6.13

HDE130-000-000 Chain support base £4.98

Ramps and Rounded Ends

• Extremely durable ramps and rounded endsare sold in pairs

• Manufactured in natural rubber withembossed pattern to aid grip

• One pair of ramps covers one metre acrossthe road

• Fitted with cats eyes

• Eight bolts required to fix each pair

List Price Code Description Size Speed (mph) (exc VAT)

HAR010-425-300 Pair of speed bumps 5cm/2" x 35cm/133⁄4" 10 £35.89

HAS000-520-200 Yellow endcaps 5cm/2" x 18.5cm/7" 10 £16.65

HAS000-521-100 Black endcaps 5cm/2" x 18.5cm/7" 10 £15.94

HAR010-435-300 Pair of speed bumps 7.5cm/3" x 50cm/193⁄4" 4 £51.35

HAS000-531-100 Pair of black endcaps 7.5cm/3" x 18cm/171⁄8" 4 £26.84

HAS000-530-200 Pair of yellow endcaps 7.5cm/3" x 18cm/171⁄8" 4 £27.74

268

Co

nstr

ucti

on

268

TRAFFIC MANAGEMENT

• The preferred traffic management and termmaintenance two-part moulded cone withUV stabilised LDPE blow moulded top andheavy duty 100% recycled composite base

• All cones come complete with Sealbrite class R1B sleeve

• Complete with sealbrite Des 2 sleeve

Dominator Road Traffic Cones

List PriceCode Size (exc VAT)

JAB049-240-600 50cm/20" £4.79

JAB069-240-600 75cm/30" £10.46

JAB079-240-600 1M/39" £11.93

JAZ069-240-600 75cm/30" MK2 £9.58

• One piece cone complete with class R1Breflective sleeve with traditional hexagonalbase design

• Sand weighting contained in a sealedmoulded base

• JAA030-220-600 complete with Des 2 sleeve

• JAA069-220-600 complete with sealbritesleeve

Standard One Piece Traffic Cones


JAA030-220-600 45cm/18" £22.68

JAA069-220-600 75cm/30" £8.67

• 5 x standard one piece sand weighted45cm/18” cones

• Complete with Des 2 sleeve

5 Pack of Cones


JAA030-220-615 £22.68

Flashing Microlite

• 360 lens for all-round light visibility

• Impact resistant lens moulded frompremium quality polycarbonate, co-polymerpolypropylene body, twist lens for on/offoperation

• Competitively priced, exceptional value formoney


LEM020-001-200 With photocell £4.22

LEM010-001-200 Without photocell £3.76

• 100% recycled cone complete with reflectivesleeve

• JAU030-200-600 complete with Des 2 sleeve

• JAU069-200-600 complete with sealbritesleeve

Roadhog Traffic Cones


JAU030-200-600 45cm/18" £4.60

JAU069-200-600 75cm/30" £10.14

• Moulded from UV stabilised polyethyleneand rubber base

MK4 No Waiting Traffic Cone


JBB081-140-200 £13.23

Cone Signs

• Manufactured from tough but flexiblepolypropylene sheeting and easy to erect ona 75cm or 1M cone

• They are lightweight and offer significantspace saving advantage due to their flatpack design

• Sign face reflective to EN12899-1

• Lightweight sign, quick and easy to place on cone

• Unique PVC sleeve on back of sign enableseasy location on most 75cm and 1M cones

• Class 2 reflective facing


HBC010-300-000 Road works diagram 7001 (564) 75cm/30" £20.96

HBC020-300-000 n/s narrows diagram 517 75cm/30" £20.96

HBC030-300-000 o/s narrows diagram 517 75cm/30" £20.96

HBC040-300-000 Keep left diagram 610 75cm/30" £23.02

HBC050-300-000 Keep right diagram 610 75cm/30" £23.02

HBC070-200-000 Pedestrian left diagram 7017 (567) 600 x 450mm £20.96

HBC080-200-000 Pedestrian right diagram 7017 (567) 600 x 450mm £20.96

HBC100-200-000 Footpath closed 600 x 450mm £29.78

269

Co

nstru

ctio

n

269

TRAFFIC MANAGEMENT

LASER LEVELS

Portabrite Signs

• Frames of recycled non-metallic constructionaccepting removable sign faces,interchangeable, lightweight and eco-friendly

• All sign faces are reflective conforming toEN12899-1

List Price Code Description Size (mm) (exc VAT)

HBQ010-300-000 Road works 750 £39.52

HBQ020-300-000 Road narrows left 750 £39.52

HBQ030-300-000 Road narrows right 750 £39.52

HBQ042-100-000 Keep left 750 £39.52

HBQ052-100-000 Keep right 750 £39.52

HBQ070-400-000 Pedestrian left 600 x 450 £29.40

HBQ080-400-000 Pedestrian right 600 x 450 £29.40

Laser Distance Measure

• Measuring scale metric and imperial

• Complete with tilt sensor and 2 x 1.5v AAAbatteries

Specification:-

• Measure range 0.05 - 100M• Sonic tape accuracy: ± 1.5M over 30M• Measure range: ± 45°• Accuracy to the laser beam: ± 0.3°

• Accuracy to the housing: ± 0.3°• Measuring units 0 000M, 0 000ft, 0 00°. 1⁄16,

0 000", 0 00M. 0 00, 1⁄16ft, 0 00"• Measurements per battery up to 5,000• Weight: 95Kg

SSPCode (exc VAT)

LDP100P £229.00

Laser Distance Measure

• Measuring scale metric and imperial

• Complete with 2 x 1.5v AAA batteries

Specification:-

• Measure range 0.05 - 60M• Sonic tape accuracy: ± 1.5M over 12M• Measuring units 0 000M, 0 000ft, 0 00° 1⁄16,

0 00, 1⁄16"

• Measurements per battery up to 5,000• Weight: 90Kg

SSPCode (exc VAT)

LD060P £115.00

650Nm Laser Level

• Accuracy +/- 0.5mm/M

• Self levelling compensation angleless than 5º

• Horizontal, vertical and crossed laser lines

• Works in corners and even at an angle

• Levelling time <_ 5 seconds

• Power supply 3 x AA (LR6) batteries

• Estimated battery life 30 hours

• Acoustic feedback when laser is beyond selflevelling range

• One touch button operation

• Complete with bag and 1.1Mmulti-functional tripod

SSP Code (exc VAT)

F0150515AC £59.57

High Precision Levelling Laser

• Specifically designed for professionalsinvolved in external general construction

• Fully automatic rotation laser

• Extremely robust due to lighthouse cap

• Fully controllable by hand-held unit

• Powerful receiver lens

• Dust and splash proof

• Versatile – fully automatic vertically and horizontally

• 3 working modes

• Working range up to 200M with receiver

• Complete with carry case, target plate, lasergoggles, 1 x battery pack, battery chargerand incline calculator

Specification:-

• Dimensions: 190 x 280 x 180mm• Laser diode: 635Nm < 5mW• Laser class: 3• Self-levelling range: ±5° ±8%• Rotation speeds: 600, 200, 50, 10rpm• Levelling accuracy: 0.05mm H&V• Working range w/o receiver: 75M• Working range with receiver: 200M• Dust and splashproof: IP66• Weight: 3Kg

SSP Code (exc VAT)

BL 200 GC £1,654.00

270

Co

nstr

ucti

on

270

LASER LEVELS

Levelling Laser and Wall Mount

• The levelling laser with 2 lines, 1 horizontaland 1 vertical (separately controlled) crossedlines

• Levelling controls – flashing lines when outof levelling range

• Manual mode for operation in inclination

• Very good visibility of laser lines

• One-button control allows for one-handedoperation

• Complete with wall mount, angle plate,strap and protective case

Specification:-

• Levelling accuracy: 0.3mm/M• Levelling range: +4°• Levelling time: <4sec• Laser diodes: 635Nm• Laser class: 2• Fan angle: horizontal line 120° / vertical

line 140°• Working range: min 10M (depending on

light conditions)• Dust and splash guard: IP54• Power supply: 3 x 1.5v LR6 (AA) batteries• Operating time: approx 12 hours for

crossline mode• Tripod adaptor: 1/4"• Dimensions: 118 x 57 x 89mm• Weight: 4.5Kg

SSP Code (exc VAT)

BL 2LWM £175.00

Horizontal and Vertical Self-Levelling Line Laser

• Automatic out of level indication marks alevelled line in seconds

• 2 button operation and low batteryindication for ease of use

• Built-in magnetic pivot bracket mountseasily on metal surfaces

• Overmoulded housing helps maintaincalibration under jobsite conditions

• Complete with 3 x AA size alkaline batterieswith 20+ hours runtime, wall mountbracket and heavy duty carrying case

Specification:-

• Laser class: 2, <1mW • Accuracy: +/-0.3mm/M• Number of beams: 2 • Direction of beams: vertical/level • Indoor visibility range: 15M• Self-leveling range: average 4°• Power supply: 4.5v - 3x AA • Tripod connection: 1/4"

SSP Code (exc VAT)

DW087K-XJ £179.00

3 in 1 Self Levelling 4 Beam Laser Pointer

• Combination of plumb, level and square 4beam laser pointer

• One button operation is fast and easy to use

• Focused laser beam keeps dots small evenover long distances for improved accuracyand visibility

• Overmoulded housing helps maintaincalibration under jobsite conditions

• Locating magnets hold laser to metal trackfor easy positioning

• Kit box protects unit and helps maintaincalibration when stored in gang box

Specification:-

• Laser class: 2, <1mW• Accuracy: +/- 0.2mm/M• Number of beams: 4• Direction of beams: up/down/level/square• Indoor visibility range: 25M• Self levelling range: 4º• Power supply: 6v - 4 x AA• Tripod connection: 1/4"

SSP Code (exc VAT)

DW084-XJ £280.00

LAR250 Self-Levelling Rotation Laser

• Water and dust proof to IP65

• Also resistant to cold and heat

• Automatic levelling for quick and accuratework

• Horizontal and vertical mounting on atripod, the base plate or ground, etc

• Motorised automatic levelling for greateraccuracy

• Continuous levelling compensates for theeffects of any vibrations

• Stabila Protector System cushions severeimpacts and can be reset if knocked over

• Sturdy protective guards and rubber seals

• Convenient remote control

• 350M working range when linked to thereceiver

• Complete with sturdy carry case, targetplate and rule, laser goggles, and receiverwith mounting plate


LAR250 £1,275.68

271

Co

nstru

ctio

n

271

LASER LEVELS

LAR200 Self-Levelling Rotation Laser

• Extremely robust: if toppled, can easily bereset and will remain in perfect conditionthanks to the Stabila Protector System whichcushions severe impacts

• Water and dust proof to IP65

• Also resistant to cold and heat

• Easy to use: one switch, one knob, onefunction

• Fast setup for reliable self levelling

• Compatible with most machine controls

• 300M working range when linked to thereceiver


LAR200 £1,162.74

• Robust, fast and accurate

• Suitable for suspended ceilings, setting out brick work, interior construction and dry walling

• Plumb upwards and downwards, 90º and horizontal laser

• Multi-functional base plate

• Self levelling

• Laser blinks if out of range

Specification:-

• Operating range of up to 30M• Accuracy of +/-0.2mm/M


STB-16145 £297.18

One Button LA-4P 4 Point Laser Level

LAPR-100 Self-Levelling Laser Level

• Level laser blinks if out of range

• Self levelling rotating laser

• Scan/line function in horizontal and vertical mode

• Point/dot function

• Dust and water protected

• Pendulum lock protects the laser when turned off

• Suitable for use with all Stabila tripods

• Complete with goggles, receiver, measuringrod, target plate and rule all in a strongplastic case

Specification:-



STB-LAPR-100 £780.54

LAR100 Self-Levelling Laser Level

• Level laser blinks if out of range

• Fully automatic self levelling rotating laser

• Suitable for use with all Stabila tripods

• Scan/line function with remote control

• Point/dot function

• Dust and water protected

• Pendulum lock protects the laser whenturned off

• Horizontal slope setting +/- 5º with remotecontrol

• Complete with goggles, receiver, remotecontrol, target plate and rule, all in a strongplastic case

Specification:-



STB-LAR100 £945.72

• Complete with lifting column for precisionheight adjustment

• Suitable for professional construction work

• For use with all Stabila lasers

• Spread stopper, rapid locking, carrying strapand lifting column

Specification:-

• Height: 220cm• Weight: 6.5Kg


STB-BST-K-L £233.77

• Suitable for professional construction work

• For use with all Stabila lasers

• Spread stopper, rapid locking and carryingstrap

Specification:-

• Height: 160cm• Weight: 4Kg


STB-TRI ECO BST-N Laser tripod £75.33

STB-TRI BST-S Laser tripod with spread stopper, rapid lock and carrying strap £94.61

Lightweight Aluminium Construction Laser Tripod

STB-TRI

STB-TRI ECO

Lightweight Aluminium Construction Laser Tripod

272

Co

nstr

ucti

on

272

CABLE REELS & SPLITTERS

Cable Reels, Leads and Splitters

SSPCode Description (exc VAT)

Reels

CRP25110 Cable reel 110v 25M 2 x 16amp sockets £29.95




CS10230 Cassette reel 230v 10M 2 x 10amp sockets £11.95

CS25230 Cassette reel 230v 25M 4 x 13amp sockets £20.95

Extension Leads

E116110 14M 110v 1.5mm with 16amp plug & coupler £11.25





Box and Lead Splitters

4WJBC 110v 4 way splitter box complete with cable & plug £22.49

YAD16-110 110v 16amp 2 way lead splitters £15.00

WAD16-110 110v 16amp 3 way lead splitters £21.00

CRP25110

E116110

4WJBC

Cable Reels

• Complies with BS5733 standard

• Robust PVC drums and steel frame

Length List Price Code Voltage (M) (exc VAT)

AT42035 110 25 £46.45

AT42037 110 50 £65.04

AT42036 240 25 £30.53

AT42038 240 50 £52.54

Cassette Reels

Length Socket List Price Code (M) Voltage Amperage Type (exc VAT)

AT42015 9 110 16 Twin £19.95

AT42046 10 240 13 Triple £17.01

No of List PriceCode Length (M) Voltage Amperage Gangs (exc VAT)

4510092 25 240 13 2 £48.53

4510094 40 240 13 2 £67.47

4510096 50 240 13 2 £89.91

4510093 25 110 16 2 £74.09

4510095 40 110 16 2 £132.85

Open Cable Reels with Cut-Out

For our range of detectors,please see the Measuring

section 666-667

273

Co

nstru

ctio

n

273

CABLE REELS & SPLITTERS

Cassette Cable Reels with Cut-Out

No of List PriceCode Amperage Voltage Length (M) Gangs (exc VAT)

4510090 10 240 10 4 £20.91

4510080 13 240 10 4 £26.09

No of List PriceCode Amperage Voltage Length (M) Gangs (exc VAT)

706635 13 240 20 4 £39.77

706659 13 240 50 4 £84.30

715133 16 110 20 2 £66.45

No of List PriceCode Decription Length (M) Gangs (exc VAT)

4502120 4 way ultraslim 1 4 £9.15

4502122 6 way ultraslim 1 6 £12.88

Semi-Enclosed Cable Reels with Cut-Out

Ultraslim Trailing Leads

TRANSFORMERS

Intermittent and Continuous Transformers


Intermittent

P7/1 750VA 1 x 16amp socket £38.25

P10/1 1,000VA 1 x 16amp socket £40.50

P15/2 1,500VA 2 x 16amp sockets £46.50

P20/2 2,250VA 2 x 16amp sockets £48.00

P30/2 3,300VA 2 x 16amp sockets £51.00

P50/3 5,000VA 2 x 16amp & 1 x 32amp sockets £148.50

P30/2RE 3,300VA 2 x 16amp sockets with the “RED EYE” power indication system £55.50

TP30/2 3,300VA 2 x 16amp sockets tuff box £54.50

P23030** 3.3kVA portable "STEP UP" transformer 110v - 230v 2 x 230v sockets £96.00

P23015** 1.5kVA portable "STEP UP" transformer 110v - 230v 1 x 230v socket £63.00

Continuous

P50TC 5.0kVA GRP case 2 x 16amp & 1 x 32amp sockets £215.00

M50C 5.0kVA metal case 2 x 16amp & 1 x 32amp sockets MCB protected £277.50

M100C 10.0kVA single phase (230v) site transformer, metal cased4 x 16amp & 2 x 32amp sockets MCB protected £420.00

M3100C 10.0kVA three phase (400v) site transformer, metal cased4 x 16amp & 2 x 32amp sockets MCB protected £487.50

M30TCV 3.3kVA “Heater Transformer” 1 x 32amp socket £193.50

** Please state whether 13amp or 16amp sockets required

P30/2

M100C

2 x 250w Halogen Lamps on Telescopic Stand with Detachable Head

SITE LIGHTS

• Manufactured to IP44 specifications

• Die-cast aluminium body with adjustablemounting bracket and separate on/off switch

• Head detaches to become a stand alone unitto place on floors or shelves

• Complete with halogen bulbs and fittedwith metal grilles to protect lens/bulbs from

damage and protect users hands from hot lenses, cable and plug

• Adjustable tripod base

Specification:-

• Overall height: 0.68M (approx)• Maximum height: 1.05M (approx)• Cable length: 3M (approx)

List PriceCode Part No Description (exc VAT)

69209 HL500T/F 110v lamp £85.46

69297 HL500T/F 2 x spare bulbs - 110v £4.48

69208 HL500T/F 230v lamp £73.14

69296 HL500T/F 2 x spare bulbs - 230v £4.48

274

Co

nstr

ucti

on

274

SITE LIGHTS

• Manufactured to IP44 specifications

• Die-cast aluminium body with adjustablemounting bracket

• Separate on/off switch

• Complete with halogen bulbs and fittedwith metal grilles to protect lens/bulbs fromdamage and protect users hands from hotlenses, cable and plug


Specification:-

• Overall height: 0.7M (approx)• Maximum height: 1.8M (approx)• Cable length: 1.8M (approx)


62388 HL1000/TA110 110v Lamp £92.32

63959 HL1000/TA110 2 x spare bulbs - 500w £4.42

• Manufactured to IP44 specification

• Die-cast aluminium body with adjustablemounting bracket

• Complete with halogen bulb and fitted witha metal grille to protect lens/bulb fromdamage and protect users hands from hotlens, cable and plug


Specification:-

• Overall height: 1.1M (approx)• Maximum height: 2M (approx)• Cable length: 1.8M (approx)


62387 HL500/TA110 110v lamp £77.48

63959 HL500/TA110 2 x spare bulbs - 500w £4.42

59111 HL500/T 230v lamp £55.98

56460 HL500/T 2 x spare bulbs - 500w £6.58

62387

59111

500w Halogen Lamp on Telescopic Stand

2 x 500w Halogen Lamps on Telescopic Stand

• Splashproof to JIS4 Standard

• Expert quality

• Incorporates 24 white LEDs (50,000 hourworking life) on a slimline body whichmeasures only 6mm deep by 24mm wideand 300mm long

• Lamp can be used in areas whereconventional lamps cannot go due to sizeconstraint

• Engine oil, hydrocarbon and chemicalresistant surfaces so the lamp can be used inautomotive and industrial applications

• Complete with 5M (approx) of cable withconnector for 12v DC car cigarette lightersocket or 230v AC mains adaptor with 3 pinplug

Slimline LED Inspection Lamp

List Price Code Part No (exc VAT)

47557 IL24/LED £119.98

Site Lighting


Lamp

TH3/110 Tungsten halogen 300w tube 110v £0.99




LB60110 GLS bayonet cap 60w 110v lamp £0.50

LS60110 GLS Edison screw 60w 110v lamp £0.50

Portable

H/LIGHT 500w halogen carry light 110v £10.95

H/LAMP Standard hand held inspection light, maximum 60w 110v £9.95

G/LAMP Gripper inspection light - polycarbonate cover, maximum 60w 110v £19.95

WG/LAMP Gripper inspection light - wire guard, maximum 60w 110v £22.50

Tripod

TRIFL5/SKT 5ft plasterers light on tripod with 2 x socket outlets 110v £72.00

SITEKIT 25M festoon kit - bulbs, guards and plug 110v £45.00

TRI/LE Single head 500w halogen fitting on tripod 110v £20.75

TRI/TE Double head 500w halogen fitting on tripod 110v £25.95

Portable Light

Tripod

275

Co

nstru

ctio

n

275

SITE LIGHTS

24" 110v Plasterer’s Light

Mini PortableLight

Single Portable Light

Single Head Site Lights

• Fluorescent floor standing light

• Tough polycarbonate lens cover

• 2 x 110v outlets for ‘in-series’ linking

• Suspension hook for versatility

• Complete with 2 x 18w bulbs


AT43054 110v light £48.63

AT43053 18w spare bulb £1.95

List Price Code Power (exc VAT)

AT43010 500w, 240v £28.95

AT43012 500w, 110v £29.95


AT43001 500w, 240v £38.95

AT43005 500w, 110v £39.95

• Adjustable height and direction for totalflexibility

• With 2.9M of cable and approved plug

• Extendable tripod (78-183cm)

• Comes complete with tube

Double Head Site Lights

• Powerful high intensity halogen tube

• Toughened glass with wire guard

• Suitable for indoor or outdoor use

• Tripod made from strong tubular steel

• Comfortable padded carrying handle


• Suitable for indoor or outdoor use

• Comfortable padded carrying handle


• Powerful high intensity halogen tube


AT43015 500w, 240v £15.95

AT43017 500w, 110v £16.95


AT43020 150w, 240v £9.95 Mini Single

Goliath G250 55w Work-Light

List PriceCode Decsription IP Rating Voltage (exc VAT)

1775 420G2 without sockets 65 240 £127.79

1775 423G2 without sockets 65 110 £140.10

1775 421G2 with sockets 54 240 £140.10

1775 422G2 with sockets 44 110 £151.26

1775 421G2B with sockets and battery 54 240 £160.40

1775 422G2B with sockets and battery 44 110 £179.66

• Waterproof and dustproof to a minimum ofIP44

• Generates the same light as a 500w halogenlight

• Consumes just 55w of power by utilising a2D fluorescent bulb

• Bulb runs cold so you can work in closeproximity without getting hot

• Packaged in a tough polycarbonate casewith a rubber boot for durability

• Lens is virtually shatterproof

• Unique hanging strap

• Light can be fixed or floorstanding

• Lightweight

• 9 position handle

• Plus and Pro models come complete with 2 socket outlets and on/off switch

• Supplied with 5M of rubberised cable, theGoliath is the ideal work-light for the trade

Specification:-

• 2D bulb: 4,000 lumen• Bulb consumption: 55w • Average lifespan: 10,000 hours

Ask for details on our full range of lighting

276

Co

nstr

ucti

on

276

SITE LIGHTS

Goliath Work-Light Accessories

1171 071

4507 240G2 List PriceCode Description (exc VAT)

Goliath Universal Tripod

4507 240G2 Maximum height 2.6M £69.55

Goliath 12v Boosters/Inverters

1171 070 Booster/Inverter 150w 12v adaptor £65.62



Tripod

• Available with single or double holdingbracket

• Allows you to mount the light above youand create the perfect working environment

12v Booster

• 12v inverter, ideal for taking power from a vehicle

• Ideal for cars/vans/trailers

• Converts 12v DC into 240v AC voltage

• 150w and 300w plug into the vehiclecigarette lighter

• 600w clips directly to the battery

• Soft start inverter eliminates power outagesand burnouts

FALL ARREST

Pioneer DS24 4 Point Attachment Harness

• Comprises of the Pioneer DS full bodyharness with a work positioning supportbelt with two lateral D-rings for attaching awork positioning lanyard

• The Pioneer DS24 has excellent back supportfor improved comfort over long periods

• Fully adjustable shoulder and leg straps

• Conforms to EN361 and EN358


FA8065 £73.88

• The most commonly used full body harnesscomplete with metal D-ring attachment atthe back and front to increase usability

• Fully adjustable shoulder and leg straps

• Conforms to EN361

Pioneer DS Front and Rear Attachment Harness


FA8055 £31.25

Vertex 8145 2M Adjustable Rope Restraint Lanyard

• Used in conjunction with Pioneer DS24

• Work positioning lanyard, 2M with ring typelength adjuster and 2 screw gate karabiner

• Conforms to EN358/362


FA8145 £24.63

Vertex 8105 2M Energy Absorbing Lanyard

• Complete with 1 x pinnacle screw gate and1 x aluminium snap hook

• Shock absorbing webbing lanyard withscaffold hook and screw gate karabiner

• Conforms to EN355/354/362


FA8105 £47.38

Vertex Twin Energy Absorbing Lanyards

• Shock absorbing twin forked webbing lanyardwith 2 scaffold hooks and screw gatekarabiner


• Complete with Pinnacle SC and 2 xAluminium Snap Hooks


FA8110 £75.79

FA8111 £71.04

277

Co

nstru

ctio

n

277

FALL ARREST

Vertex 8600 - 2.25M Retractable Lanyard

• Retractable webbing fall arrester with alength of 2.25M

• Robust plastic housing and instant lock off,with 2 screw gate karabiners



FA8600 £75.79

Scaffolders and Restraint Kits

• Scaffolder kit contains: Front and rearattachment harness, 1.75M energy absorbinglanyard with screw gate karabiner andscaffold hook, linesman helmet and a pair ofJ Flex gloves contained in a handy rucksack

• Restraint kit contains: Rear attachmentharness, adjustable restraint lanyard with 2screw gate karabiners and handy rucksack


FA9930 Scaffolders kit £110.84

FA9920 Restraint kit £61.59

STEPS, LADDERS & PLATFORMSExtension Ladders

Box Section Extension Ladders

Section Closed Open Weight List PriceCode Description x Rungs Length (M/ft) Length (M/ft) (Kg) (exc VAT)

Double Extension

61026 2.6M 2 x 9 2.59/8'6" 4.48/14'8" 10 £77.00

61031 3.1M 2 x 11 3.13/10'3" 5.56/18'3" 12 £95.00

61034 3.4M 2 x 12 3.4/11'2" 6.1/20' 13 £112.00

61040 4M 2 x 14 3.94/12'11" 7.18/23'7" 18 £133.00

61045 4.5M 2 x 16 4.48/14'8" 8.26/27'1" 20 £156.00

Triple Extension

61002 2M 3 x 7 2/6'7" 4.7/15'5" 10.4 £91.00

61003 2.6M 3 x 9 2.57/8'5" 6.35/20'10" 15 £133.00

61005 3.4M 3 x 12 3.4/11'2" 8.24/27' 23 £193.00

• Classification: BS EN131

• 2 or 3 section heavy duty extension ladders

• Abru patented design for strength andrigidity at any height

• Heavy duty contoured feet and tips

• Wide non-slip ’D’ rungs for comfort andsecurity

• Suitable for professional and domestic use

• Maximum safe working load150Kg/23.6stone

Section Closed Open Weight List PriceCode x Rungs Length (M/ft) Length (M/ft) (Kg) (exc VAT)

Double Extension

65018 2 x 6 1.85/6'8" 2.95/9'8" 8.5 £87.00

65024 2 x 8 2.41/7'10" 4.07/13'4" 10.8 £106.00

65030 2 x 10 2.97/9'9" 5.19/7' 13 £126.00

65035 2 x 12 3.53/11'7" 6.31/20'8" 16.5 £155.00

65041 2 x 14 4.09/13'5" 7.43/24'5) 18.9 £176.00

65044 2 x 15 4.37/14'4" 7.98/26'2" 22.5 £203.00

65049 2 x 17 4.93/16'2" 9.1/29'10" 27.4 £242.00

65055 2 x 19 5.49/18" 10.22/33'6" 30.4 £267.00

Triple Extension

65118 3 x 6 1.85/6'8" 4.04/13'3" 13.5 £129.00

65124 3 x 8 2.41/7'11" 5.72/18'9" 17 £160.00

65130 3 x 10 2.97/9'9" 7.4/24'8" 24.3 £221.00

65135 3 x 12 3.53/11'7" 9.08/29'9" 30.8 £274.00

65141 3 x 14 4.09/13'5" 10.48/34'5" 35.4 £314.00


• Heavy duty extension ladders

• Box section stiles for strength and rigidity

• Non-slip ‘D’ shaped rungs

• Non-slip feet

61040

61002

65030

65130

278

Co

nstr

ucti

on

278

STEPS, LADDERS & PLATFORMS

Combination Ladders

Telescopic Combination Ladder

Builders Swingback and Platform Stepladders

Maximum SafeWorking Load Weight List Price

Code Description (Kg/Stone) (Kg) (exc VAT)

28026 3 way with work tray 130/20.4 7.4 £62.00

21014 4 way 150/23.6 12.1 £110.00

21045 5 way 150/23.6 16.4 £126.00

21045

• 28026 BS 2037 Class 1

• 21014 and 21045 BS EN131


3 Way 4 Way 5 Way

Stepladder, extension ladder Stepladder, stairwell ladder, Stepladder, stairwell ladder, and stairwell ladder extension ladder and extension ladder, stair

freestanding extension platform and ladder level platform

Stepladder Top Rung Height 1.56M/5'1" 1.56M/5'1" 1.56M/5'1"

Extension Ladder Length 2.74M/9' 3.91M/12'10" 2.74M/9'

Freestanding Extension Ladder Length 2.74M/9'

Maximum Platform Height 1.2M/3'11"

Stepladder Height Extension Ladder Max Safe Working List PriceCode (M/ft) Height (M/ft) Load (Kg/stone) Weight (Kg) (exc VAT)

68065 1.44-2.54/4'9"-8'4" 2.95-5.31/9'8"-17'5" 150/23.6 15.4 £163.00

• Conforms to EN131

• 4 sections

• 5 rungs

• Lightweight and strong

• Adjustable, telescopic sections and simple‘click-lock’ hinge system

• Can be used in stepladder, stairwell andextension ladder modes

• Non-slip feet and splayed base for extrastability

• Easy to use, transport and store


• Classification: BS 2037 Class 1

• Heavy duty aluminium for industrial use

• Available as swingback or platformstepladders

• Large non-slip feet


• Maximum safe working load 130Kg/20.4stone

Top Tread/ Platform Weight List Price

Code Treads Type Height (M/ft) (Kg) (exc VAT)

Builders Stepladders

60104 4 Swingback 0.8/2'7" 4 £52.00

60106 6 Swingback 1.27/4'2" 5.5 £63.00

60108 8 Swingback 1.73/5'8" 7 £81.00

Builders Platform Stepladders

60204 4 Platform 0.8/2'7" 5.8 £60.00

60206 6 Platform 1.27/4'2" 7.3 £88.00

60208 8 Platform 1.73/5'8" 9 £108.00

60108

60206

Aluminium Stepladder

No of Platform Weight List PriceCode Treads Height (M/ft) (Kg) (exc VAT)

10503 3 0.58/1'11" 5 £60.00

10505 5 1.02/3'4" 6.5 £74.00

10507 7 1.47/4'10" 9 £104.00


• Strong deep treads for comfort and security

• Twin safety handrails

• High support rail and handy work tray



279

Co

nstru

ctio

n

279


Trade Access Towers

• Conforms to HD 1004 Part 3

• Lightweight aluminium construction

• Non-slip platform with toe boards (50008)

• Integrated trapdoor allows you to climbinside tower

• Folding base frame - easy to transport anderect

• Safety stabilisers available for B and Cextension packs

• Platform dimensions 1.46M x 0.6M (4'10" x 2')



Reach Platform Working Overall Height Height Platform Base Weight List Price

Code Description (M/ft) (M/ft) W x D (M/ft) W x D (M/ft) (Kg) (exc VAT)

50006 Base pack 2.69/8'10" 0.94/3'1" 0.6/2' x 1.46/4'10" 0.83/2'9" x 1.75/5'9" 26.5 £350.00

50007 Extension pack A 3.55/11'8" 1.80/6' 0.6/2' x 1.46/4'10" 0.83/2'9" x 1.75/5'9" 9 £166.00

*50008 Extension pack B 5.25/17'3" 3.50/11'6" 0.6/2' x 1.46/4'10" 2.88/9'6" x 3.7/12'2" 28.5 £350.00

*50009 Extension pack C 6.95/22'10" 5.20/17' 0.6/2' x 1.46/4'10" 2.88/9'6" x 3.7/12'2" 20.5 £304.00

*Including stabilisers

Telescopic Safety Platforms

• Unique, adjustable telescopic multi-heightdesign can be used in stairwell and onuneven ground

• Stabilisers fold and adjust for convenienceand extra safety

• Wheels allow for easy repositioning

• Solid work platform with toe boards foradded security

• Platform dimensions 600 x 420mm

• Lightweight and strong aluminiumconstruction

• Quick and easy to assemble

• Safety guardrail on all sizes

• Approved by the Health & Safety Executive


Maximum SafeNo of Platform Folded Working Load Weight List Price

Code Treads Height (M) Height (M) (Kg/stone) (Kg) (exc VAT)

60304 4 to 6 1.06 to 1.52 2.38 150/23.6 30 £721.00

60307 7 to 9 1.77 to 2.23 3.13 150/23.6 36 £899.00

Maxi Work Platform

• Simple and safe to use with locking hingesfor added safety

• Wide and deep non-slip platform

• Perfect for all odd jobs

• Compact folded dimensions

• Lightweight - easy to transport

Maximum SafePlatform Platform Platform Working Load Weight List Price

Code Width (M/ft) Length (M/ft) Height (M/ft) (Kg/stone) (Kg) (exc VAT)

29002 0.36/1'2" 0.99/3'3" 0.5/1'8" 150/23.6 4.6 £42.00

ELT Trade Ladders

• Certified to BS EN131

• Ideal for all types of trade work

• Large comfortable ‘D’ shaped rungs

• Rigid extruded box section stiles for addedstrength

• Secure non-slip grip with all round PVCmoulded feet

• Comprehensive range of sizes available

Closed Extension No of Weight List PriceCode Height (M) Height (M) Rungs (Kg) (exc VAT)

2 Section Push-up

ELT225 2.42 3.82 8 9 £81.68

ELT230 2.92 4.88 10 10.5 £93.54

ELT235 3.42 5.94 12 14 £116.14

ELT240 4.04 7.03 14 16 £125.70

ELT245 4.42 7.81 15 20.5 £149.88

ELT250 4.92 8.83 17 23.5 £163.38

ELT255 5.42 9.90 19 29 £178.24

3 Section Push-up

ELT325 2.42 5.22 8 16.5 £126.12

ELT330 2.92 6.85 10 18.5 £145.02

ELT335 3.42 8.46 12 25.5 £177.94

ELT340 4.04 10.22 14 28.5 £202.30

3 Section Push-up

280

Co

nstr

ucti

on

280


TRL Trade Roof Ladders

• Lightweight, but combines the strength of atrade ladder with a heavy duty ridge hook

• Industrial non-slip rungs and box sectionstiles

• Rubber-covered bearer bars distributesweight evenly, preventing damage to roof

• Available in single and double sections

• Double sections fitted with safety catches

Closed Overall No of Weight List PriceCode Length (M) Length (M) Rungs (Kg) (exc VAT)

TRL130 2.95 11 8.5 £140.44

TRL135 3.45 13 10 £139.02

TRL140 3.95 15 11 £145.68

TRL145 4.50 17 11.5 £152.32

TRL150 4.97 19 12 £159.00

TRL155 5.46 21 13.5 £172.20

TRL230 2.94 4.64 11+9 14 £180.74

TRL235 3.44 5.64 13+11 16 £200.50

TRL240 3.94 6.64 15+13 18 £212.06

TRL245 4.30 7.67 17+15 20 £228.40

TLS Telescope Ladder System

• Adjustable, telescopic sections and simple‘Click-Lock’ hinge system

• Can be used as a stepladder, stairwell ladderand extension ladder

• Compact folded dimensions, very easy touse, transport and store

• Non-slip feet and splayed base for extrastability


• Tested to EN131

Sections x Stepladder Extension Product List PriceCode Rung Height (mm) Ladder Height (mm) Weight (Kg) (exc VAT)

TLS4X4 4 x 4 1,300 to 2,168 2,660 to 4,425 13.7 £171.44

Combination Ladders

• Combines a stepladder and extension ladderin one product

• Unique sliding mechanism for easyconversion to all three ways

• Wide base and heavy duty feet for stabilityand grip

• Non-slip treads for comfort and security

• Compact folded dimensions for easytransportation and storage

• Stabilisers for extra stability

• Suitable for a wide variety of uses

• Suitable for trade and domestic use

• Certified to EN131

Stepladder Extension Product List PriceCode Folded (mm) Height (mm) Ladder Length (mm) Weight (Kg) (exc VAT)

CL6 1,680 2,390 3,280 9.2 £109.90

CL7 1,960 2,924 4,123 10.4 £124.32

CL8 2,240 3,450 5,064 12.3 £144.38

CL9 2,525 3,906 5,910 13.45 £173.20

CL10 2,800 4,473 6,740 15.2 £188.94

BSWP Aluminium Wide Step

• Certified to BSEN131

• Wide working platform

• All aluminium frames and treads

• Suitable for industrial work as well as tradeuse

Optional Features:

• Wheels at rear

• Ladder tag for inspection and maintenance

• Tool tray

Open Platform Closed Treads Weight List PriceCode Height (mm) Height (mm) Height (mm) Inc Platform (Kg) (exc VAT)

BSWP3 1,625 610 1,780 3 8 £247.28

BSWP4 1,840 835 1,980 4 9 £253.50

BSWP5 2,050 1,050 2,225 5 10 £268.94

281

Co

nstru

ctio

n

281


GFWP Glass Fibre Wide Step


• Wide working platform

• Glass fibre frame with aluminium treads

• Glass fibre Surestep insulated and non-conductive while in use

• Suitable for industrial work as well as trade use

Optional Features:

• Wheels at rear

• Ladder tag for inspection and maintenance

• Tool tray

Open Platform Closed Treads Weight List PriceCode Height (mm) Height (mm) Height (mm) Inc Platform (Kg) (exc VAT)

GFWP3 1,625 610 1,780 3 9 £280.58

GFWP4 1,840 835 1,980 4 11 £293.86

GFWP5 2,050 1,050 2,225 5 14 £310.64

BSBB/BSBP Trade Stepladders

• Certified to BS EN131 and BS 2037 Class 1

• Unique strengthening beam incorporatedinto non-slip treads, rubber feet andaluminium side arms prevents slips andtwists as there are no tapes to snap, orflimsy arms to break

• Rigid box section back legs with additionalcross braces and ‘K’ straps for increasedstrength and stability

• Lightweight and easy to carry

• Plastic tool tray to hold tools and equipmentwhile working

Overall Open Platform Closed Treads Weight List PriceCode Height (M) Height (M) Height (M) Inc Platform (Kg) (exc VAT)

BSBP Platform Stepladder

BSBP3 1.24 0.59 1.35 3 4.5 £70.04

BSBP4 1.46 0.81 1.59 4 5.26 £73.68

BSBP5 1.68 1.03 1.83 5 6.02 £79.70

BSBP6 1.91 1.26 2.07 6 6.78 £86.16

BSBP7 2.13 1.48 2.31 7 7.54 £91.86

BSBP8 2.31 1.68 2.55 8 8.3 £96.72

BSBP10 2.74 2.12 3.01 10 9.06 £109.92

BSBP12 3.20 2.60 3.52 12 9.82 £121.06

BSBB Swingback Stepladder

BSBB3 0.58 0.66 3 2.6 £53.60

BSBB4 0.81 0.89 4 3.3 £61.16

BSBB5 1.03 1.14 5 4 £68.82

BSBB6 1.26 1.38 6 4.7 £74.58

BSBB7 1.48 1.62 7 5.4 £80.46

BSBB8 1.70 1.86 8 6.1 £86.46

BSBB10 2.17 2.34 10 6.8 £99.98

BSBB12 2.57 2.82 12 7.5 £112.50

BSBB6

BSBP6

Visit the Maintenance &Consumables section

for our decorating range, pages 634-636

282

Co

nstr

ucti

on

282


Glassfibre Swingback & Platform Stepladders


• Non-conductive so is ideal to use whereelectrical hazards exist

• Unique strengthening beam incorporatedinto non-slip treads; rubber feet andaluminium side arms prevent slips and twistsas there are no tapes to snap, or flimsy armsto break

• Rigid box section back legs with additionalcross braces and ‘K’ straps for increasedstrength and stability. Back legs are alsoreinforced. This applies to 10 and 12 treadstepladders only

• Lightweight and easy to carry

• Plastic tool tray to hold tools and equipmentwhile working

Open Closed Treads Weight List PriceCode Height (mm) Height (mm) Inc Platform (Kg) (exc VAT)

GFBB - Glassfibre Swingback Stepladder

GFBB3 0.55 0.59 3 3.25 £68.02

GFBB4 0.77 0.85 4 4.25 £75.98

GFBB5 0.99 1.10 5 4.75 £86.42

GFBB6 1.22 1.34 6 5.5 £94.42

GFBB7 1.44 1.58 7 6.5 £103.08

GFBB8 1.70 1.81 8 7.5 £111.60

GFBB10 2.11 2.29 10 9 £150.12

GFBB12 2.54 2.77 12 10.5 £172.38

Open Platform Closed Treads Weight List PriceCode Height (mm) Height (M) Height (mm) Inc Platform (Kg) (exc VAT)

GFBP - Glassfibre Platform Stepladder

GFBP3 1.23 0.59 1.33 3 5 £96.60

GFBP4 1.44 0.82 1.56 4 6 £104.58

GFBP5 1.67 1.04 1.8 5 7 £113.96

GFBP6 1.89 1.26 2.04 6 8 £121.98

GFBP7 2.10 1.48 2.27 7 9 £131.48

GFBP8 2.31 1.69 2.51 8 10 £140.28

GFBP10 2.73 2.11 3 10 12 £182.22

GFBP12 3.17 2.56 3.47 12 14 £204.56

GFBB

GFBP

Non-Slip Platforms

• Simple and safe to use with locking hingesfor added safety

• Perfect for all odd jobs

• Compact folded dimensions

• Lightweight - easy to transport

• Tested to EN131

Platform Platform Platform Product List PriceCode Width (mm) Length (mm) Height (mm) Weight (Kg) (exc VAT)

WPS1 300 600 480 4.65 £42.08

WPS2 300 1,000 480 5.6 £48.90

Podium Steps

• Meets all the requirements of the ‘Workingat Heights Regulations’ - this item providesan excellent alternative to step ladders

• The work platform offers massive safety:1,000mm all round lockable guardrail systemwith non-slip platform surface - even inthe rain

• ‘Locking’ 360º rotating wheels, for addedsafety and stability

• Offers flexibility for working in all locations -folds up in seconds and fits through astandard doorway, back of vans or on a roof rack

• Self contained in 1 piece and can easily behandled by 1 person

• Manufactured from aluminium, a lightweightproduct, durable and will provide anexceptional work tool for all users

• Made to Lyte Industries highest quality ofUK manufacture

Please remember - a thorough risk assessmentmust be carried out prior to any work beingundertaken at height

Depth Height Width Weight List PriceCode (mm) (mm) (mm) (Kg) (exc VAT)

PODSTEP 1,200 1,830 650 32 £494.84

POD1 1,200 2,210 650 37.5 £547.64

POD 14 1,200 2,430 650 38.5 £761.64

POD 17 1,200 2,680 650 40 £866.66

POD 2 1,200 2,930 650 42 £1,398.84

Height 2

283

Co

nstru

ctio

n

283


Industrial Folding Tower System - LIFT

• Tested and certified to BS1139 (Parts 3)1994 and HD1004

• Base can be used alone, or increased by afurther 3 lifts which can give an extra 7platform heights (using extra components)

• Fits easily into most small vans or estate cars

• Quick and easy to erect

• Compact and easy storage due to narrowtower width

• Quick release pull rings with stainless steelpin on all bracings for easy assembly

• Smooth and ribbed texture on braces forquick identification

Please remember - a thorough risk assessmentmust be carried out prior to any work beingundertaken at height

Platform Height (M)0.6 1.6 2.1 3.1 3.6 4.6 5.1 6.1

£372.51 £534.54 £818.96 £982.95 £1,121.03 £1,285.04 £1,310.52 £1,474.52

All prices are list price (exc VAT)

Industrial Tower Systems

• Tested and certified to BSEN 1004

• Dual brake on/off system

• Quick release pull rings with stainless steelpin on all bracings

• Smooth and ribbed tubing on braces forquick identification

• Wide ladder with hexagonal rung for easierclimb and additional safety

• Large, articulated rubber feet on all stabilisers

• Extruded aluminium ladder stile and rung

• Heat treated gravity castings

• Spring steel frame lock clips

• Reinforced platforms

Specification:-

• 2 widths available: 0.85 and 1.45M• 3 lengths available: 1.8, 2.5 and 3.2M• Extruded tube diameter: 50.8mm• Extruded tube thickness: 1.6mm• Frame spigots: 3mm

Platform Height (M) 2.2 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2

Length: 1.8M, Single Width: 0.85M

£1,077.42 £1,132.22 £1,362.95 £1,451.61 £1,501.78 £1,791.78 £1,980.42 £2,069.08 £2,119.25 £2,382.48 £2,432.65 £2,496.44 £2,571.48

Length: 1.8M, Double Width: 1.45M

£1,196.10 £1,255.18 £1,493.15 £1,583.26 £1,640.68 £1,880.31 £2,076.18 £2,166.30 £2,223.72 £2,517.99 £2,603.28 £2,693.40 £2,750.82

Length: 2.5M, Single Width: 0.85M

£1,138.23 £1,195.34 £1,469.48 £1,560.44 £1,612.92 £1,946.33 £2,137.28 £2,228.24 £2,280.72 £2,587.36 £2,639.84 £2,730.81 £2,783.28

Length: 2.5M, Double Width: 1.45M

£1,273.94 £1,335.32 £1,616.70 £1,709.12 £1,768.85 £2,112.55 £2,206.94 £2,299.37 £2,359.08 £2,682.40 £2,827.50 £2,919.93 £3,187.25

All prices are list price (exc VAT) 3.2M length is available on request, please ask for full details

• Fully certified to EN131 standard

• The ultimate versatile ladder for thetradesman

• 10 rung ladder that extends to 12'6" (3.8M)

• Complete with a free carry bag

Click ‘N’ Climb Telescopic Ladder

Size List PriceCode (M) (') (exc VAT)

CCTL38 3.8 12' 6" £115.00

• Lightweight but sturdy aluminium foldingwork platform

• Ideal for preparation, painting andwallpapering

Workstands

Height Working List PriceCode (mm) Height (mm) (exc VAT)

DWDK607 700 500 £34.92

DWDK608 800 600 £46.13

DWDK612 1,200 1,200 £52.51

• Aluminium step stool, handy for numeroustasks around the home

• Ideal height for most modern ceilings

• Lightweight and practical

2 Step Aluminium Step Up Stool


LFD44AL £15.92

284

Co

nstr

ucti

on

284


• The world’s widest range of telescopicladders

• Patented - Certified - The Original

• Ideal for narrow compartments

• Easy to fold, carry and transport

• Always a perfect and safe height

• Use free standing or against a wall

• Wide treads for comfort during long workingsessions

• Certified to EN 131 -SP, TUV/GS, NEN 2484

Telesteps

Max Working List Price Code Height (M) (exc VAT)

LAD61520 3.2 £323.36

List Price Description (exc VAT)

Telescopic Ladders

3.3M black line telescopic ladder - 65mm treads £189.00

3.8M black line telescopic ladder - 65mm treads £225.00

1.7M black line telescopic combi ladder £235.00

2.3M black line telescopic combi ladder £285.00

3M black line telescopic combi Ladder £340.00

Black line telescopic work platform £245.00

2.4-60 mini black line telescopic loft ladder £185.00

2.7M adjustable black line telescopic loft ladder £198.00

List Price Description (exc VAT)

Accessories

Top support £69.00

Working tray £30.00

Adjustable safety feet (pairs) £60.00

Safety feet fixed (pairs) £35.00

Telesteps branded carry bag £19.00

Ground spikes £8.00

• The first telescopic non-conductive ladder inthe world

• Voltage tested in accordance with theEuropean Standards EN61478 – withstandsvoltages of 30kv

• Insulating tubes

• Extremely lightweight - just 9.3Kg

• Easy to close - just press the red button onthe third step to collapse the whole ladder

• Easy to carry and very portable

Telescopic Non-Conductive Ladder


• Combining lightweight with exceptionalstrength and durability

• Youngman's most popular trade ladder

• Used by professionals throughout the world

• Push up ladders

MaximumHeight (M) Safe Working List Price

Code Closed/Open Height (M) (exc VAT)

3 Section

570121 2.5/5.57 6.05 £108.10

570122 3.08/7.43 7.68 £118.10

570123 3.66/9.17 9.31 £158.13

570124 4.24/10.62 10.68 £192.74

MaximumHeight (M) Safe Working List Price

Code Closed/Open Height (M) (exc VAT)

2 Section

570111 2.5/3.95 4.4 £63.57

570112 3.08/5.11 5.5 £73.12

570113 3.66/6.27 6.59 £89.34

570114 4.24/7.43 7.68 £104.98

570115 4.82/8.59 8.77 £119.78

570116 5.4/9.75 9.86 £142.10

Trade 200 Aluminium Extension Ladders

285

Co

nstru

ctio

n

285


Combi 100 Aluminium Combination Ladders


• Adapts to stepladder, extending stepladderand extension ladder

• A compact 4 section combination ladder

• Lightweight and versatile, ensuring you canachieve many different tasks

MaximumHeight Height Safe Rungs DutyClosed Open Working Per Rating Weight List Price

Code Description (M) (M) Height (M) Sections Section (Kg/Stone) (Kg) (exc VAT)

340381 Combi 100 2M ladder 1.92 3 6 110/17.3 11.3 £99.28

Step ladder 1.853 2.298

Extension ladder 3.483 3.942

Extending stepladder 2.683 3.128

Stairway ladder 2.684 3.129

341381 Combi 100 2.5M ladder 2.5 3 8 110/17.3 17.2 £125.00





342381 Combi 100 3M ladder 3.08 3 10 110/17.3 23 £162.00





Height (M) Safe Working List Price Code Treads Closed/Open Height (M) (exc VAT)

305996 5 1.22/0.86 2 £53.23

306996 6 1.44/1.27 2.35 £60.83

307996 7 1.8/1.59 2.4 £72.42


308996 8 1.9/1.69 2.56 £87.48

310996 10 2.36/2.1 2.98 £102.01

312996 12 2.82/2.52 3.39 £142.16

• Certified to BS 2037 Class 1

• Wide, slip resistant treads

• Broad base enhances the safety and stability

Aluminium Industrial Builders Steps


302330 £159.00

• 4 tread aluminum EN131 for professionaluse

• 19 different heights across 4 differentmodes of operation:Extension ladder – 8 different heightsExtending step ladder – 4 different heights Stairway ladder – 5 different heightsTrestle mode – 2 different heights

Transformer

Catwalk Heavy Trade Fibreglass (GRP) Platform Steps


• For working at 1 level for a period of time

• Offers a solid standing area and anergonomic knee rail

• In line with the Work At Height Regulations2005

• Colour: yellow


527454 4 1.815/0.91 2.5 £69.13

527456 6 2.315/1.37 2.9 £83.14

527458 8 2.815/1.83 3.4 £102.24

Make sure you are complying with the latest

Work at Height Regulations

286

Co

nstr

ucti

on

286


MaximumHeight Height Safe Rungs DutyClosed Open Working Per Rating Weight List Price

Code (M) (M) Height (M) Sections Section Kg/Stone (Kg) (exc VAT)

576704 0.95 3.46* 3.859* 4 3 110/17.3 12 £82.00

* as leaning ladder

• Certified to EN 131

• Leaning ladder with standoff

• Step ladder and stairway ladder

• Easy to adjust to various positions and easyto transport

Multi-Purpose Ladder

Maximum DutyFolded Platform Platform Safe Working Rating Weight List Price

Code Size (M) Size (M) Height (M) Height (M) Kg/Stone (Kg) (exc VAT)

311514 0.52 x 1.3 x 1.96 0.5 x 0.6 1.71/0.94 2.94 150/23.62 29 £425.00

• 2 platform heights - 0.71 and 0.94M

• Fits through a standard doorway whenfolded

• Guardrails to ensure compliance with workat height regulations

• Stable both when folded for transport andautomatically when opened up into workmode

• Extremely tough product

P1000 Podium Platform

Maximum DutyFolded Platform Platform Safe Working Rating Weight List Price

Code Size (M) Size (M) Height (M) Height (M) Kg/Stone (Kg) (exc VAT)

312514 0.781 x 1.904 x 2.461 0.5 x 0.6 1.21/1.44 3.44 150/23.62 39 £675.00

• 2 platform heights - 1.21 and 1.44M

• Fits through a standard doorway whenfolded

• Guardrails to ensure compliance with workat height regulations

• Stable both when folded for transport andautomatically when opened up into workmode

• Extremely tough product

P1500 Podium Platform

• An entry level trade tower

• A lightweight access system that is easy totransport and store

• Perfect for use inside and out

• Fits easily through standard doorways andcorridors

• Available in easy to order "packs"

• MiniMax can provide a tower up to 7.8Mworking height

HD 1004 MiniMax Aluminium Access Towers

List Price Working Height (M) Contents (exc VAT)

2.9 Base pack £395.10

3.7 Base pack, guardrail pack and 2 x small stabilisers £785.12

5.7 Base pack, extension pack, guardrail pack and 2 x small stabilisers £1,293.21

7.8 Base pack, 2 x extension pack, guardrail pack and 2 x medium stabilisers £1,502.13

Visit our Hand Tools section,

pages 385-520

construction - rs industrial services

Documents