collective sale of combines, tractors, plant, vehicles
TRANSCRIPT
Auctions
Live online bidding at both sales available via
Tea Shop open for refreshments on viewing and sale days
Free on site parking available
Clarke & Simpson
Auction Centre,
Campsea Ashe,
Nr Wickham Market,
Suffolk.
IP13 0PS
Collective Sale of Combines, Tractors,
Plant, Vehicles, Machinery and Spares
Saturday 28th May 2016 Sale One commencing at 9.30am
Sale Two commencing at 10.30am
Viewing: Friday 27th May from 2pm to 6pm
and on the morning of sale from 8am
Lot 1005
Clarke and Simpson
And The London Office
40 St James Street
London SW1A 1NS
www.clarkeandsimpson.co.uk
Well Close Square
Framlingham
Suffolk
IP13 9DU
T: 01728 621200
F: 01728 724667
Opus House
Elm Farm Park
Thurston
Suffolk
IP31 3SH
T: 01359 230514
Lot 930
Lot 1022
Lot 947
Sale One - Commencing at 9.30am
Literature
Massey Ferguson 3600 workshop manual, (2 volumes)
Massey Ferguson 3600 workshop manual, (1 volume)
Massey Ferguson 6100 workshop manual, (1 volume)
Massey Ferguson 6200 workshop manual, (3 volumes)
Massey Ferguson 3000/3100 workshop manual,
(2 volumes)
Massey Ferguson 3000 Series workshop manual,
(1 volume)
New Holland Fid Agri M Series workshop manual,
(2 volumes)
Ford Series 10 workshop manual, (2 volumes)
Various Massey Ferguson 35/65 Service books in ring
binder
New Holland TX60 Series combine workshop
manual, (1 volume)
New Holland TX60 Series combine workshop
manual, (1 volume)
New Holland TM Series workshop manual, (2
volumes)
New Holland TM Series workshop manual, (2
volumes)
Ford 10 Series workshop manual, (2 volumes)
Ford 1000 Series workshop manual, (2 volumes)
New Holland TG Series workshop manual,
(3 volumes)
New Holland 40 Series tractor manual, (2 volumes)
New Holland 70 Series workshop manual,
(2 volumes)
Quantity of Manitou workshop manuals to include
modern teleporters and forklifts (2 lots)
2x JCB 500 Series workshop manuals
Quantity of Claas manuals to include Dominator
Various Perkins original manuals including L4 and P3
Series engines
Various modern Perkins workshop manuals
Foreword
The sale comprises in excess of 950 lots, the vast
majority of which are from farmers throughout East
Anglia.
As part of the auction there are large consignments
from The Executors of G F Bull Dec’d, who farmed
at Green Farm, Clopton and The Executors of A H
Favell Dec’d, who farmed at Greenwood Farm,
Mickfield, together with some excellent quality items
from The Executors of J Leader Dec’d of Monks
Hall, Syleham.
These lots will be highlighted on the sale day.
IMPORTANT NOTES: Please refer to Terms and Conditions of sale to be
found at the rear of the catalogue. Timing Sale One will commence at 9.30am promptly and Sale Two at 10.30am, both sales will run concurrently. Although the first numbered lot is 600, the list below is purely indicative. Accordingly, please telephone or email the auctioneers the day before the sale for a better idea regarding timing. Value Added Tax The symbol * after any lot number or description in indicates that Value Added Tax is payable by the buyer on the hammer price. Buyer’s Premium The following buyer’s premium will be added to the hammer price: Lots up to £200 - 10% plus VAT Lots from £201 to £1000- 5% plus VAT Lots from £1,001 - 3% plus VAT with a maximum of £1,000 plus VAT per lot. Collection There will be Teleporters available for loading on the sale day, Sunday 29th May 8am - 12 noon and Tuesday 31st May 8am - 4pm, thereafter strictly by appointment. Any lots too large to be loaded by the Teleporters are the responsibility of the purchaser. All lots must be removed by 4pm Thursday 2nd June and attention is drawn to item 26 under the Terms and Conditions at the rear of the catalogue. Enquiries All specific enquiries to James Durrant 07773 359134 / [email protected] or Keith Gray 07551 151862 / [email protected] Live on-line bidding is available via i-bidder.com. Prior registration is necessary, please visit www.i-bidder.com for more information. Any purchases made via i-bidder.com shall be subject to an administration charge of 1% plus VAT on the hammer price. Please refer to the Conditions of Sale at the rear of this catalogue for further detail.
Original Massey Ferguson 735 combine brochure,
New Holland Hayliner 278, Super Hayliner 78, Super
Hayliner 68 and Super Hayliner 268, balers operators
manuals
International 84 Series workshop service manual and
ZF axle manual
New Holland TX36 combine workshop manual
Various service manuals for International to include
BTD6 crawler, 144 and 154 engines, B450 operators
manual, 264 and 281 diesel engines, hydraulic
equipment and electrical equipment service manuals
Case 2100 combine workshop manuals
Various implement instruction books and manuals
Various International, Ford and David Brown 1200
manuals
Various machinery manuals to include Claas and
Ransomes
Various tractor manuals to include Ferguson FE35,
Massey Ferguson etc.
Various manuals to including Ransomes, Ferguson
and Massey Ferguson
Vintage John Deere tractor service manual
Quantity of Case tractor brochures
David Brown tractor and implement operator's
handbook
Large quantity of Tractor and Machinery and other
magazines
Miscellaneous
4x 6" heavy duty G cramps*
Spline, torque and hex bit sets*
Mortice chisels*
Professional chisel set*
25 piece drill set and 29 piece drill set*
170 piece HSS drill set*
24v chain saw sharpener*
Electric sheep shears*
4x British Army folding knives*
3x BB guns*
Stainless steel border fork and spade*
Stainless steel digging fork and spade*
Post hole digger and post hole spade*
2x aluminium shovels*
Long and short manure forks*
2x Professional groundwork tools*
Heavy duty root chopper*
Spear & Jackson lopper and stainless steel hand trowel
and fork*
Fence post auger*
S & J cross-over post hole digger*
Contractors rammer*
3 pairs of secateurs and 8ft telescopic pruner*
Fibre glass axle and log splitter*
Mattock and slasher*
Telescopic ratchet loppers and telescopic hedging
shears*
Power pruner, lopper and shears*
Fencing pliers and puller*
Knapsack pressure sprayer*
40x 4.5" cutting discs*
10x 9" cutting discs*
20x 9" metal grinding discs*
14lb sledge hammer*
4x levels*
40 piece tap and die set*
40 piece spline set*
24" and 30" bolt croppers*
Heavy duty rivet gun*
3 piece heavy duty wrench set*
28 piece punch and chisel set*
10 piece air impact socket set*
14 piece 1/2" deep impact sockets*
38 piece air impact sockets*
Air ratchet*
Air chisel set*
Air spray gun*
Professional air inflation gun*
Portable sand blaster*
40 various shackles*
40 bow shackles*
50x 9.5mm linch pins*
150x 6mm, 8mm and 10mm linch pins*
8x assorted hitch pins*
250x mixed R clips*
10x spring gate latches*
10x medium gate latches*
4KG mixed nuts and bolts*
30 tonne bottle jack*
Ball hitch and pin tow coupling*
5ft bar and 24" strong back bar*
48" high lift jack*
Jockey wheel*
Pneumatic jockey wheel*
Bracket for ribbed jockey wheel*
48mm ribbed jockey wheel*
Sack barrow*
Trailer winch*
3/8" tow chain* (4 lots)
5/16" tow chain* (4 lots)
Steel loading ramp*
Tyzack straight edge*
5 litre Jerry can and a 20 litre Jerry can*
14" and 15" Bahco toolboxes*
800amp jump leads x 6 meters*
3/4" x 39" Vanadium flex bar*
10 tonne porta power*
Rotary barrel pump*
12x 200ml copper grease and 12x 200ml engine start*
24x 250ml DP60 penetrating oil*
24x gripper gloves*
36x gripper gloves*
4x 70mm discus padlocks*
10x 15mm iron padlocks*
3x various security padlocks*
1800mm heavy chain and lock*
94 piece socket set*
41 piece socket set*
26 piece CV socket set*
12 piece metric ring spanners*
16 piece CV spanner set*
48 piece spanner set*
25 CV metric spanners*
2x 35mm x 6m lorry straps* (2 lots)
2x 8m lorry straps* (2 lots)
2x 12m lorry straps* (2 lots)
2x 3m 2 tonne eyedsling (certified)*
2x 4m 2 tonne eyedsling (certified)*
24 wire brushes*
24 spid wire brushes*
6x wire cup brushes*
5 litres Oxide paint* (4 lots)
2x thinners*
3m extendable wash brush*
Automatic welding mask*
18ft x 23ft tarpaulin*
4x tarpaulins of various sizes*
4ft trailer board*
Magnetic trailer light set*
2x 6ft folding lattice garden spires*
2x 5ft folding garden lattice spires*
Stainless steel milk churn*
Floor standing post box, (reproduction)*
GPO post box, (reproduction)*
9 piece knife set in case*
9 piece knife set in bag*
VR GPO post box, (reproduction)*
Cockerel door bell*
Horse door bell*
Land Rover bell*
Rusty cauldron*
Garden pump*
Tractor seat stool*
Tractor seat stool*
Cast iron pig*
Cast iron rusty hen*
Cast iron rusty hen*
Large deer head*
Cast iron cockerel*
Mister Rabbit*
Mister Ratty*
Cow*
Horse head bust, (no base)*
Horse head bust, (no base)*
4x Shell sign*
Curved shell sign*
2x football plaques*
6x cast iron vegetable signs* (2 lots)
12x cast iron herb signs*
Large dog sign*
Large and small Land Rover signs*
Cast Triumph plaque and round cast Norton sign*
"Beware of Trains" sign*
3ft Railway sign*
2x Ransomes signs*
John Deere plaque*
2x metal advertising signs*
Large metal sign* (8 lots)
Waving Michelin man*
John Deere moneybox*
Set of 4 wooden crates*
3 graduated wooden trugs*
Engineer's twin pillar drill*
Quantity of grain ducting*
Top link and drawbar for tractor
Part roll of barbed wire
Large water container
Flat barrow
Gas bottle trolley
Various poultry feeders and drinkers
Cattle yard gate
Quantity of alkathene pipe
Quantity of chicken wire
Pair of vehicle ramps
Wolseley Titan rotovator with various attachments, to
include discs, ridger and different rotors. With 5HP
Briggs & Stratton engine and handbook
Workshop compressor with spraying filter
Small PTO driven water pump
Bundle of Hessian sacks
2x 20 litre black barn paint (2 lots)
2x 20 litre green floor paint (2 lots)
2x 20 litre black bitchumen (2 lots)
2x 20 litre red floor paint (2 lots)
2x 20 litre white masonry paint (2 lots)
10x sheep hurdles* (8 lots)
SIP Airblower Fireball 120 DUS propane heater*
Kenforma Thermobile GA 92 propane heater*
Jetair LG 140A propane heater*
Propane Hurricane lamp*
Propane brazing lance/wand*
Box of Oasis floral foam*
8ft x 2ft x 2.5ft lockable tool cabinet*
Various plough and cultivator wearing metal (10 lots)
Various water troughs
Various small cast iron wheels
2x unused cattle yard gate posts
Various plough discs
Garden roll
Ford Tractor pulleys
Dewalt 1420 radial arm circular saw. 240v, 16A
Startrite Mercury MkII 5 speed bench pillar drill
Hayterette pedestrian mower with 5HP Briggs &
Stratton engine
Eliet Minor wood chipper. 2007. Serial no.0740060.
With Honda 6.5HP petrol engine
Scheppach TS4010 rise and fall saw bench. 1999.
230v,12.6A
Axminster SF001K dust extractor/collector. 2003.
Serial no. 030215. 240v.
3 phase electric motor
3HP 3 phase electric motor
7.5HP 3 phase electric motor
0.75HP 240v single phase electric motor
240v single phase electric motor
Portable workshop compressor with petrol engine
Compactor plate with Honda engine
Stihl TS400 disc cutter
Stihl TS400 disc cutter
Various ear taggers
Quantity of black and blue alkathene pipe
Quantity of drainage pipe and fittings
Various electric fencing units
Roll of stock fencing
Large galvanised water tank
4ft cattle yard gate
Drawbar for David Brown tractor
9 hole drawbar and stays for MF35 tractor
2 rolls of barbed wire
Quantity of electric fence posts
Various poultry drinkers and feeders
Heavy duty tow chain
Chain brothers
Various tow chains
Four wheel hand trolley
Plough for Merry Tiller rotovator
Speedall 10" power hacksaw*
4x corn drying spear tubes
2x cast iron pig troughs
2x cast iron pig troughs
Galvanised small corn bin
Diesel generator, comprising Petter engine coupled to
G & M power plant. 240v. 2000watts
2x 7.5 tonne axle stands and rigid 6ft tow bar
Various subsoiler wearing metal to include Ransomes
Various subsoiler wearing metal to include Ransomes
Atco 24" cylinder mower. Circa 1965. Vendor reports
that this has been fitted with a new engine but has
been dry stored and unused for circa 25 years
Crary Bear-Cat wood chipper. Fitted with 5HP
Briggs & Stratton engine. Vendor reports that this has
had little use and has been dry stored
20x Diesel fuel filters and 3x housings
20x Diesel fuel filters
Selection of paint spraying guns
Various parts to fit Fordson Major E1A tractor
Electric polisher
Various Ferguson spares and MF65 side panel
2x tractor seats
International crawler seat back, (unused)
Metal implement seat
9x spring loaded gate bolts
Various legs for puller drawers
2x 300 gallon plastic water tanks
Wall mounted gun cabinet
Quantity of large washers
Stihl HL75 pole hedge trimmer
McCulloch Double Eagle 50 petrol chain saw
Ryobi Expand-it 4 stroke petrol engine with brush
cutter, strimmer, rotovator and hedge trimmer
attachments
Black & Decker 12" electric chain saw
Performance 1020w router
Powerbase 600w planer
Record power DS19 pillar drill
Performance 190mm 750w compound mitre saw
Faithfull boxed 12 piece chisel set
Box of miscellaneous tools
2000w petrol generator
950w petrol generator
Flymo 2200w Turbo leaf blower/garden vac
Gardenline 1800w leaf blower
Flymo Pac-a-mow electric lawn mower
17" general purpose saddle (3 lots)
3x unused wool top rugs 6ft 3" x 6ft 6"
Large horse clippers (3 lots)
Small set of horse clippers
3x sets of spare blades for horse clippers (2 lots)
Large quantity of horse bits (3 lots)
Kipor KDE7000TA Diesel generator with tool kit and
plugs. Vendor reports this is as new
2x MF combine sieves. 5mm dia. 140mm x 81.3mm*
4x old oil measuring jugs*
Fordson toolbox*
10x Digger bucket teeth*
Long length of 25mm wire rope, (as new)*
Set of Salter scales to weigh upto 56lbs*
Approx. 90 points for pressure or Dutch harrow*
16 points for chisel plough*
Quantity of S tines and points*
2x Claas hay tedder tines*
Assortment of electric meters, switches and isolators*
Various ram harnesses and ear tag pliers*
4x bucket greasers and oil pump*
7x grease guns*
Rotomec power harrow tines and spare points*
8x Weld-on power harrow tines*
E cable for Horsch CO drill monitor*
Air stream helmet with charger*
Reversing camera and screen. Vendor reports that this
complete*
240v infra-red heater with stand*
John Deere 6400 drawbar and pick-up hook*
Unused FIT meter*
Selection of following harrow tines*
Unused electro/hydra actuator for farmhand drill*
2x unused belts for Nodet Gougis DP12 fertiliser
spreader*
K5 rotary hand pump*
300k Btu Tropical space heater*
6x pallets of Suffolk red bricks
Circa 400 22" x 11" slates
2x pallets of 9" x 9" pammetts
Circa 31 12" x 12" pamments
3x pallets of Yorkshire stone pieces
Various secondhand exterior doors and frames
24x Zero press wheels for Stanhay drill
Quantity of 20mm nuts and bolts
Quantity of flashing lights
Knife spares for John Deere combine
Scatterbird gas gun
Matrot side knife
Quantity of Standen beet knives
Large Dowdeswell plough ram
Quantity of Dowdeswell small plough rams
Various PTO shafts
Stanhay press wheels
Quantity of Howard rotovator blades
Quantity of various spring tines
3x heavy duty pulley blocks
Large pulley block
Various Dowdeswell spares
4x unused steering discs for Kongskilde hoe
Unused APS concave for Claas Lexion 470
3x automatic horse drinkers
3x galvanised wall mounted horse troughs
Selection of dairy spares to include vacuum pump and 2
stainless dump buckets
Brenden Honda diesel engine powered pressure washer
with hose, lance and electric start
Quantity of air tools
Stihl pole saw
Quantity of air driven nail guns and nails
Quantity of strimmers for spares or repair
Sides, tailgate and headboard for Brian James 16ft trailer
2x rolls of chain link fencing
Pair of size 9 black external toe cap safety boots
Pair of size 10 black external toe cap safety boots
Pair of size 9 fur lined tan rigger boots
Pair of size 10 tan rigger boots
Pair of size 9 tan rigger boots
Pair of Dr Martin size 11 black slip-on safety boots
Welding head shield
2x reels 1.2mm aluminum mig wire
5KG 3.2mm x 1000ALI Tig welding rods
5KG 2.4mm x 1000 Thermanit Tig welding rods
5KG 1.6mm stainless steel Tig welding rods
2.5KG 3.2mm aluminum welding rods
2.5KG 2.4mm aluminium welding rods, (3 boxes)
2.5KG 3.2mm aluminium welding rods, (2 boxes)
2.5KG 2.4mm flux coated bronze welding rods
2.5KG 1.6mm bronze welding rods
2.5KG impregnated brazing rods
15KG reel 1.2mm mig wire
5KG reel 1.2mm mig wire
Medium yellow waterproof jacket
Small yellow waterproof trousers and jacket
XL Winter work jacket
4x boxes of 25 4.5" stone discs
3x boxes 10 general purpose 4" discs (2 lots)
6x boxes ASS Filterlight UV welding filter lenses. Size
4.25 x 3.25. Various shades (2 lots)
3x boxes of 5 UV lenses. Size 4.50 x 5.25. Various shades
6x caravan plugs
40" Royal blue overalls
38" Royal blue overalls
36" Royal blue trousers and jacket
42" green poly cotton jacket
42" Navy poly cotton trousers
42" green poly cotton overalls
Pair of denim work jeans - W38" L31"
Gun cabinet*
Various Ford tractor spares to include linkage parts
and drawbars*
Various Dowdeswell spares*
Anvil*
Gas bird scarer*
PTO tractor pulley*
Sealey battery charger*
Barbour wax jacket 42"*
Dickies Westfield XL jacket with tags*
Aluminium tower scaffold8
Toro leaf blower*
Petrol driven hydraulic power pack with breaker gun*
Single phase spindle moulder*
Ransomes 24" cylinder mower*
Atco 15" cylinder mower*
Metal implement seat
Metal oil cabinet with pumps
Assortment of saw blades
3.5T solid tow bar, long vehicle sign and 2x warning
triangles
Various bench vices
Dunlop steering wheel tracking device
Large metal toolbox
Hose and tap for diesel tank
Large wooden trusses
Radiator for Ferguson tractor
3ft iron gate
Petter single cylinder diesel engine. Type AVA. Serial
number 3179265
Lombardini self start diesel engine. Type 7LD 600/1.
Serial number 2373377
Diesel stationary engine
Lister single cylinder diesel engine. Serial number
3901864LTIC010
Set of lifting chains
Battery charger
Arc welder
Pressure washer
Axle stands
Large quantity of hand tools, various toolboxes and
contents
Various fasteners
Kongskilde 3 phase grain blower with pre-cleaner and
large quantity of 6" pipework*
Ingersoll-Rand 3 phase workshop compressor.
Model R557200-4003.50. Serial number
SCDE0120001.2000
2x 5ft high personnel lockers (2 lots)
Webb 2ft cut cylinder mower with roller seat and
petrol engine
Small garden roll
3 phase Clarke workshop compressor
12 x Herris fence panels and a quantity of feet
12v electric / hydraulic crane for van / trailer
Platform steps with outriggers. Circa. 12' high
6' x 4' aluminium scaffold tower
Galvanised water tank
Belle 240v cement mixer with wheelbarrow, shovel
and pick axe
6ft x 6ft sheets Dexion racking, complete with 200
assorted bins
Husqvarna 36 brush cutter with metal blade and
plastic blade head
Diesel powered saw bench with Petter engine
Stihl TS400 cut off saw with water bottle
Petrol vibrating plate
Epco 2.5 tonne trolley jack
Diesel generator with 500w flood light
Stihl FS44 strimmer
2x Robin 15 petrol engines with centrifugal clutches
4x assorted petrol engines
Wooden box with various hand tools etc
3x 1000 litre IBC*
Various grain drying spears*
Electric side knife for combine*
Heavy woodworkers moticer. Single phase*
3x Infriglo 15-60 deg barn heaters*
Yammar diesel driven 300psi jet wash with hose and
lance
Diesel driven 2" water pump with 25M delivery hose
and 6M suction hose
Fordson Super Major front badge
David Brown Selectamatic white steering wheel
Case/1H 94 Series commemorative edition decals
Linch pin/R clip pack of 50
5x tractor funnels
Ertl John Deere 9200 tractor on triple wheels. 1:16
scale
Britains New Holland CX880 combine. 1:32 scale
Selection box of nuts - UNC and metric
Selection box of terminals and blade fuses
David Brown 25D tractor bonnet
David Brown 25D cylinder head
David Brown Selectamatic tractor cab front
windscreen
Three part oil cabinet*
Oil cabinet*
Coil of wire rope*
110v Industrial vacuum cleaner*
Assorted air tools
Hayrack
Feed barrow
Sheep trough
Quantity of wooden boards
Trailer board
3 boxes of spanners and tools
Various tools
Unused Claas Dominator combine knife to fit 13ft
cutter bar
ABAC compressor with Honda 5.5HP petrol
engine
ICC Flowline hydraulic pressure tester
Set of Churchill tractor splitting rails with 5T
carriage/jack
Dunlop Major foot pump with brass barrel
Diesel Wacker plate*
Petrol Wacker plate*
Wedge lock quick hitch to fit 8T Tekeuchi digger*
Black & Decker electric drill and stand
Electric circular saw
Sealey metal band saw
Ferguson 9 hole drawbar and stays
Fencing tools
Stihl chain saw
Various taps and dies
Step ladder
Tower scaffolding
56lb anvil with cast iron stand
Quantity of wire rope
Sack barrow
Hayden AllAll forge
Echo leaf blower/sucker
Lake & Elliot 8 tonne bottle jack
Various garden tools
Silencer and manifold elbow, believed to be ex. JCB
and Ferguson bonnet and side panel
Sale Two - Commencing at 10.30am
Wheels and Tyres
600 Pair of trailer wheels and tyres
601 Pair of 650/65 R38 tyres at 60%*
602 Pair of 16" wheels and tyres
603 10 stud lorry wheel
604 3x 10 stud Super Single wheels and tyres
605 Heavy duty trailer axle and wheels
606 4x Land Rover Defender wheels and tyres
607 Nissan Navara wheel and tyre
608 Pair of Ford front wheels fitted with unused
7.50-18 tyres*
9x rabbit traps*
Electric rabbit fencing and energiser*
Jig on 3 legs for welding*
32amp or 2x16amp 110v transformer*
Three wheel trolley*
Fordson Major radiator fuel pump with starter
motor*
High clear kit for David Brown 995/6 and 3 point
linkage assister ram*
Sealey variable speed 1/2HP single phase band saw.
To cut maximum 4" x 6". With auto stop*
C & H workshop air compressor. 2HP single phase
with 50 litre tank. On wheels*
Sureweld Monomig 141 mig welder*
Various grease guns*
King electric powered lifting winch with remote
control on wire lead, hook and chain, RSJ running
carriage. To lift 500KG
Belle Minimix 80 electric cement mixer
Allen Mighty Max wood chipper with 9hp Briggs &
Stratton engine
Cooper Pegler CP15 knapsack sprayer
185cm x 40cm cast iron trough, drilled as planter
Quantity of hanging poultry feeders*
Small quantity of grain ducting*
Various hydraulic rams*
Pallet of sprayer parts to include pumps,
connectors etc*
2x ratchet winches with some cable*
Pallet of miscellaneous Massey Ferguson tractor
parts*
Quantity of miscellaneous seals*
Paxton 909 litre drinking trough* (2 lots)
Efco petrol post hole borer with 2 augers*
Efco petrol hedge cutter*
2x Alpina strimmers for spares or repairs*
Jonsered chain saw*
Quantity of 3 phase electric motors*
Various irrigation fittings*
1000 litre IBC*
2x 1000 litre IBC*
Karcher pressure washer*
24" circular saw blade. Unused. For hedge cutter*
2x 20 litre Hi Tran hydraulic/rear axle oil* (2 lots)
Billy Goat garden vac
Exhaust for International tractor
Diesel pump gun
Clarke air compressor
12v electric pump for diesel tank
10x sheep hurdles
Assorted spanners
609 Pair of drill wheels with Goodyear tyres
610 Pair of drill wheels with Goodyear tyres
611 Pair of 19" wheels and tyres
612 Pair of 16.9 R30 rear wheels and tyres to fit
JCB digger
613 Pair of 66 x 43.00-25 Goodyear Super
Terragrip floatation wheels and tyres to fit
John Deere*
614 4x 25.00 20NHS floatation wheels and tyres
to fit Bateman sprayer*
615 Set of Kleber five star dual wheels and tyres.
Comprising 13.6 R28 fronts, and 18.4 R38
rears*
616 Pair of Kleber 13.6 R38 three star dual wheels*
617 Set of Super Power Drive Radial wheels and
tyres to fit Massey Ferguson 6480. Comprising
540/65 R28 fronts @ 70%, and 800/65 R32
rears @ 70%*
618 Five Land Rover wheels and tyres*
619 Pair of 6.00 R19 wheels and tyres*
620 Pair of 18.4R16 wide grass wheels and tyres to
fit Ford 2120*
621 Pair of 48R9.5 row crop wheels and tyres*
622 Pair of 7.5R20 front wheels and tyres*
623 Pair of 16R38 wheels and tyres to fit David
Brown*
624 Pair of 3 stud 4.00R19 wheels and tyres*
625 14R20 18 ply wheel and tyre*
626 Stocks 16.9 R34 dual wheels and tyres*
627 Pair 13.6 R28 tyres casings at 30%*
628 4x 315/70 R22.5 lorry wheels and tyres
629 4x 315/70 R22.5 lorry wheels and tyres
630 Trelleborg Twin 44s LP400-17.5 front wheels
and tyres. Ex-Ford 2WD*
631 Goodyear Terratire 38x20.00-16 front wheels
and tyres. Ex-Ford 2WD*
632 8.3 x 4.4 row crop wheels and tyres to fit IH*
633 Smyth drill wheel
634 3x wagon wheels
635 2x pairs of wheel and tyres suitable for exercise
cart
636 5x 215/75 R16 tyres, 2 on rims. Removed
from 2005 long wheel base Ford transit van
637 7.50/16 trailer wheel and tyre
638 2x Ifor Williams trailer wheels
639 2x 7.50-16 SuperKing 14 ply heavy duty trailer /
tractor tyre. Unused.
640 Pair of 750x16 tractor front wheels with spare
pair of tyres
641 Two wheel barrow wheels
642 9.5 x 36 row crop wheels and tyres. Vendor
reports that tyres as new*
643 Pair 16.9 x 30 tyre casings*
644 Pair of small split rim wheel and tyres*
645 Set of row crop wheels and tyres to fit New
Holland T7 or T6. Comprising 270/95R54
rears and 230/95R40 fronts*
646 Pair of Stocks 16.9R38 dual wheels and tyres*
647 4x 185R14 trailer wheels and tyres
648 16.9R34 Opico clamp on dual wheels and
tyres. With clamps*
649 16.9R38 Stocks clamp on dual wheels and
tyres. With clamps*
650-659 Spare Lots
Implements
660 2700 litre round oil tank with sight gauge*
661 1200 litre plastic fuel tank with delivery
hose
662 6' fork lift lifting jib*
663 JCB 3' digging bucket to fit wheeled digger
664 2' digging bucket to fit 4-5T digger
665 Power loader to fit Fordson Super Major, with
muck fork
666 36" digger bucket to fit 3T 360° degree
machine*
667 McHale 3 ram shear grab. Matbro cone and
pin brackets. 2001. Type SG2.0*
668 AG Dispenser 175 cubicle sand dispenser.
Matbro cone and pin brackets*
669 IAE Warrior cattle crush*
670 Loddon cattle crush
671 Various cattle hurdles*
672 Various field gates*
673 Various field gates*
674 3x diagonal cattle feed barriers 10' x 2'.
675 David Brown 1200/1210 front weight frame
676 8x tractor weights*
677 Quantity of John Deere 40kg front weights
678 Quantity of Ford front weights*
678A Quantity of Ford 1000 Series wheel weights*
679 Large weight tray to fit Ford 7810
680 Two front wheel weights*
681 Various tractor weights*
681A Set of 22 45KG New Holland front weights*
681B Set of 22 45KG New Holland front weights*
682 David Brown Cropmaster front wheel weights.
Ex - winch tractor
683 10x FoMoCo Ford 1000 series rear wheel
weights
684 Massey Ferguson extension weight frame*
685 12" bucket for digger*
686 Snow plough with Euro 8 loader brackets*
687 Linkage mounted grader blade with concrete
weight
688 Linkage mounted PTO driven spiral log splitter
689 Rosselli swinging cradle PTO driven saw
bench with tungsten tipped fully guarded
blade*
690 New and unused Hall Engineering hydraulic
log splitter*
691 Carl Wollf mounted potato spinner
692 Parmiter double chain elevator with Briggs &
Stratton petrol engine. Vendor reports that this
was used last year to stack hay and is complete
with instructions.
693 Ferguson link box
694 Fison Pest Control Limited mounted sprayer
695 Front linkage weights*
696 Belt driven saw bench
697 Ransomes mounted potato spinner*
698 Cast iron belt driven saw bench with belt and
blade
699 Danuser F8 linkage mounted post hole borer
with 6" and 18" augers
700 Ripvator FL1500 3 point linkage mounted
fork lift with hydraulic top link and arm for
big bags*
701 Ex - MF combine 6 cylinder diesel engine on
stand coupled to Rekord RS50 drying fan*
702 Welder / generator powered by a four cylinder
engine
703 Bentall single phase 3HP hammermill with
two hoppers*
704 Hydraulic auger to fit digger with 4x augers
and extension tube
705 Three point linkage mounted arena leveller
706 PTO driven cement mixer*
707 Dening of Chard linkage mounted saw bench
with 30" blade*
708 Rear draw bar frame previously used on straw
trailer*
708A Drawbar for Vaderstad Rapide 8M drill*
709 Ferguson link box*
710 Bentall sectional 40T grain bin with fan and
ducting. Dismantled.*
711 Fyson rubber belt elevator with hopper and
three phase electric motor*
712 Spare Lot
713 Agri-Five 5' mounted topper*
714 Votex Vixen 6 mounted topper. Serial number
VV06241*
715 Quantity of seed harrows
716 Ransomes circa. 5' 6" mounted topper. Model
TG3007A
717 Spring tine grass harrow
718 Major 605 pasture topper*
719 Tractor flail mower*
720 Parmeter 3M Pro mounted chain harrows with
manual fold wings*
721 10x 20" wide medium weight seed harrows*
722 Quantity of seed harrows with three pommel
trees*
723 Wolsely 5ft mounted topper*
724 Wessex trailed 6' twin rotor inline topper*
725 Drum hay mower
726 Lely Splendimo 320 3.2M disc mower with
conditioner*
727 Ferguson finger bar mower
728 Massey Ferguson finger bar mower
729 Massey Ferguson finger bar mower
730 Vicon CM165 disc mower*
731 Lely Optimo 2400 disc mower conditioner.
Vendor reports that the conditioner requires
new bearing.
732 IH S42 finger bar mower
733 IH B23 finger bar mower for spares or repair*
734 New and unused Sitrex Hay Maker HM300
haybob*
735 Fransgard RV300 hay bob. 2003. Serial
number 138971*
736 Sperry New Holland Hay Turner*
737 Vicon Acrobat hay turner*
738 Landmec Fransgard RV390 hay bob. 1996.
Serial number 111616*
739 Landmec RV300 hay bob*
740 Fransgard RV300 hay bob*
741 PZ hay bob*
742 New Holland 276 Hayliner conventional
baler
743 Massey Ferguson 20-8 conventional baler*
744 New Holland 276 Super Hayliner conventional
baler. Model B276. Serial number
B276S18972*
745 New Holland 276 Hayliner conventional baler
746 New Holland 640 belt round baler. 1995.*
747 New Holland 650 Bale Command Crop Cutter
round baler. 1995. Serial number 916720. Net
wrap and twine. Last used 2013. Vendor reports
that the baler is missing a hydraulic hose to rear*
748 New Holland 365 conventional baler. Vendor
reports that this requires attention.*
749 Krone KR130 4' round baler. String tie
750 Cooks bale sledge and grab*
751 Cooks flat 8 bale sledge*
752 Flat 8 bale grab*
753 Old tractor drawn hay rake*
754 Lawrence Edwards linkage mounted hydraulic
bale wrapper*
755 Bomford B47 linkage mounted hedge cutter.
With cable controlled spools. Model 9017008.
Serial number 2960/L/00.
756 Bomford 528 bracket mounted hedge cutter
with electronic controls*
757 Bomford Super Trim hedge cutter. Bracket
mounted converted to 3 point linkage. Cable
controlled spools. Owned from new*
757A Spearhead 474 Excel linkage mounted hedge
cutter. Serial number S92785. c. 2008. With
cable controlled spools. Owned from new*
758 Ransomes single leg subsoiler with depth
wheels*
758A Cousins heavy duty five leg sub soiler with
leading tines, depth wheels and crumbler*
759 Haylock two leg subsoiler with crumbler*
759A Trailed twin leg heavy duty mole plough*
759B Single leg heavy duty mounted mole plough
with expander*
760 Ransomes 4F trailed crawler plough*
761 Ransomes No.9 RSLD trailed 2F plough
762 Ransomes 2F reversible plough
763 Ransomes 2F mounted conventional plough
764 Ford Ransomes 3F plough with spares
765 Massey Ferguson 3F plough
766 Ferguson 2F semi-digger plough with discs
and skimmers. Model 12-AE-28. Serial
number 3040
767 Ransomes TS82 2F reversible plough*
768 Ferguson 2F furrow conventional plough
769 Dowdeswell DP7B 5F reversible plough
(incomplete)*
770 Dowdeswell DP7D 4F reversible plough.
Serial number 21234595.*
771 Dowdeswell DP7 3+1F reversible plough.
Serial number 61439583*
772 Dowdeswell BP120S 5F reversible plough
with hydraulic front furrow width*
773 Claydon furrow cracker to fit 5F plough, with
brackets*
774 Claydon furrow cracker to fit 5F plough, with
brackets*
775 Gregoire Besson 6F fully mounted reversible
in furrow plough*
776 Ransomes Dauntless No.3 trailed cultivator
777 Ransomes mounted rigid leg cultivator
778 Massey Ferguson cultivator
779 Fordson toolbar*
780 Ransomes vintage trailed cultivator*
781 Ransomes 9 leg rigid tine cultivator*
782 8' mounted spring tines*
783 Kongskilde 11' spring tines with following
harrow*
784 Kongskilde spring tines*
785 Ransomes steerage hoe*
786 Ferguson 1-BKE-20 steerage hoe with Reekie
weeders. Serial number 3484. Ex -Hunday
Collection.
787 Ripvator 4M manual fold pig tail cultivator*
788 Farmforce 4M Drill Mate. Model FDM40.
Serial number F5120. Comprising levelling
board, two rows of spring tines and Flexicoil*
789 Lemken Smaragd 9 Terradisc cultivator
comprising two rows of tines, discs, and
double crumbler*
790 Permiter 3M mounted discs, with cut-aways
to front
791 Dowdeswell 3.5M power harrow with packer
roll*
792 Kubota S1000 tractor mounted rotovator
793 Vicon reciprocating power harrow*
794 Bomford Superflow chisel plough with 7 low
draft legs*
795 Maschio 4M power harrow with crumbler*
796 Lely 600H 6M hydraulic fold Cultiterra.
Comprising levelling boards, spring tines and
crumbler. One owner from new*
797 Howard tractor mounted rotovator*
798 Reco Maschio 1M rotovator to fit compact
tractor. Serial number 301127.*
799 Thyregod trailed stone separator with elevator
to trailer*
800 Grimme Combi-Star CS1700 de-stoner.
2006.*
801 8' flat roll*
802 Set of triple gang Cambridge rolls*
803 16ft set of triple gang Cambridge rolls*
804 24ft set of triple gang Cambridge rolls*
805 Twose 6.2M hydraulic folding rolls with
breaker rings*
806 Twose 6.2M hydraulic folding rolls with
breaker rings*
807 Circa. 12 unused 24" rib roll rings to fit 2"
shaft*
808 Circa. 12 unused 24" rib roll rings to fit 2"
shaft*
809 Circa. 12 unused 24" rib roll rings to fit 2"
shaft*
810 Circa. 12 unused 24" rib roll rings to fit 2"
shaft*
811 Circa. 12 unused 24" rib roll rings to fit 2"
shaft*
812 Farmhand 3M box drill with spring tine
coulters and covering harrow*
813 Massey Ferguson trailed drill with disc
coulters and bout markers
814 Ransomes Nordsten CLE 300 Liftomatic 3M
drill*
815 KRM 4m mounted drill comprising KRM
cultivator. Model 40OPT1. Serial number
618223. With leading rigid leg cultivator tines,
two rows spring tines and tyre packer. Mounted
to KRM Roger drill. Two rows disc coulters,
covering harrow, tramline kit and pre-
emmergence markers. Drill type W32MAX.
2001. Serial number 2085F*
816 Massey Ferguson 30 4M trailed drill. With disc
coulters, bout markers and Reekie drill trailer.
Serial number R15672*
817 Vicon LZ505 drill combination with Suffolk
coulters, tramline kit and pre-emergence
markers. Large quantity of spares for drill*
818 Lely 4M power harrow with Flexicoil and drill
linkage, coupled to Stegsted HD tine drill*
819 Berthoud 300 litre tank with hand reel and
lance*
820 Small linkage mounted single disc fertiliser
spreader
821 Hardi MK400 6m manual fold sprayer. Serial
number 942960
822 Small linkage mounted single disc fertiliser
spreader
823 Massey Ferguson mounted fertiliser spreader*
824 Allman 12M mounted sprayer with manual
fold booms*
825 Vicon PS1153 Vari-Spreader. With hydraulic
shut off*
826 Nodet 12M full width mounted fertiliser
spreader*
827 KRM circa 12m Multi Disc fertiliser spreader
type MDS921. Serial number 94-0152. 1993*
828 Small linkage mounted single disc fertiliser
spreader
829 Hardi LY1000 12M 1000 litre mounted sprayer
with electric controls, hydraulic fold booms and
induction hopper*
830 Hooper and extension to fit Vicon 802 Vari-
Spreader fertiliser spreader*
831 Ransomes Hawk 12M mounted sprayer*
832 Allman 650 litre front spray tank with pump,
solenoid recycling etc.*
833 Vicon PS753 Vari-Spreader with hydraulic
shut-off*
834 Irrigation pumpset with Perkins combine
engine*
835 Diesel irrigation pumpset comprising Ford 6
cylinder engine, Robatti pump and Murray
control unit. Skid mounted. Serial number
D5869/004*
836 2x Ford engines for spares to fit lot 835*
837 Greencrop diesel irrigation pumpset with
enclosed Iveco 6 cylinder diesel engine and
Capari pump. Skid mounted. 13,301 hours.
Serial number 975660*
838 Bauer TiH110-450 irrigator. With Komet 140
rain gun. 1993. Serial number 0393-18909*
839 Opico GT Quiet 519 12T mobile grain dryer.
Used harvest 2015*
840 Spare Lot
841 Muck fork to fit front loader
842 Grain bucket to fit front loader
843 Small GP loader bucket*
844-859 Spare Lots
Trailers
860 10ft x 5ft 8" single axle car trailer*
861 Caddy 640S 6ft x 4ft 500KG single axle car
trailer. With spare wheel and trailer cover.
Vendor reports that the trailer has been stored
undercover, is approx. 6 years and only covered
approx. 500 miles from new
862 Single axle trailer for Quad bike*
863 Car transport dolly
864 8ft x 4ft single axle car trailer
865 Lowlode twin axle plant trailer. 5ft x 10ft.
With full width ramp, sides and spare wheel*
866 Heavy duty single axle Army cargo trailer by
Johnson & Co. Believed to be US military.
1967. 9.00-16 wheels and tyres. Serial number 6
-4523. 3.6T gross on road. 2.6T gross off road*
867 Ifor Williams twin axle 12ft x 6ft flat bed
trailer*
868 14ft twin axle car trailer with drop sides*
869 Ifor Williams 12ft twin axle trailer. 3T. With
sides and ramps
870 5ft 6" x 14ft twin axle car trailer. 10" wheels to
outside. Vendor reports the trailer requires new
floor
871 Single axle fast tow water bowser*
872 Trailed single axle diesel bowser, capacity circa
1000 litres*
873 Water bowser
874 4 wheel trailer chassis, (no body)*
875 An early tumbrel converted to tractor drawbar
on pneumatic wheels and tyres
876 15ft x 6ft 4 wheel flat trailer with spare
wheel*
877 Single axle flat bed trailer with ladders
878 Four wheel vintage turntable trailer with
wooden sides and ladders
879 3T single axle tipping trailer*
880 Approx. 4T single axle tipping trailer*
881 Approx. 4T single axle tipping trailer
882 Approx. 4T single axle tipping trailer
883 Ferguson 3T single axle non-tipping (from
factory) trailer with 12 stud axle and drop-in
sides
884 Richardson Supreme Ultra twin axle 2 horse
trailer. Front and rear unload. Takes 2x17.2hh
horses. Full partition, rubber matting and
double wooden flooring
885 Rice twin axle 2 horse trailer
886 Ifor Williams HB505 Hunter twin axle 2
horse trailer. In blue. 2003. Front and rear
unload. Vendor reports trailer has only had light
use
887 Ford Ransomes TT1017 3.5T single axle
double drop side tipping trailer. Dry stored for
many years
888 Ransomes/Pettit circa 5T single axle drop side
tipping trailer. Dry stored for many years
889 10T 16ft flat trailer with Super Singles and
hydraulic brakes*
890 Ken Wotton 12T 22ft twin axle trailer chassis.
Ex-potato bulker. With oil brakes and rocking
beam axle*
891 5th wheel dolly for artic trailer*
892 Richard Western single axle slurry tanker.
Approx. 2000 gallon*
893 Howard Rotospreader 100 side discharge
single axle muck spreader*
894 Howard Rotospreader side discharge single
axle muck spreader
895 Vicon "Hippo" single axle slurry tanker
896 4 wheel turntable trailer. Approx. 15ft x 6ft 6"
897 Solapion-Kenneth Hudson & Son rear
discharge 35CWT muck spreader. Serial
number 8832
898 Kverneland Taarup 832 trailed straw chopper/
spreader. Serial number 106006. Will handle
big and round bales*
899 Keenan 80 Easi-Feeder trailed mixer wagon.
With Digi-Star scales*
900 Keenan Klassik 170 trailed mixer wagon.
September 2005. Serial number 17CR/8.
Vendor reports that this has previously been
relined and completed approx. half a season
since*
900A 32ft single axle straw trailer on Super Singles.
Unfinished project*
901 AS Marston 8.5T twin axle high tip tipping
trailer*
902 10T twin axle dump trailer*
903 Approx. 10T twin axle dump trailer with tail
gate*
904 18T 25ft twin axle beavertail low loader. With
air and oil brakes. Recent new floor and manual
fold ramps*
905 Approx. 10T single axle tipping trailer.
Ex-lorry conversion with alloy body.*
906 Approx. 10T single axle tipping trailer.
Ex-lorry conversion*
907 Single axle mobile site office. Approx. 7ft x 15ft.
2000KG. With brakes and lights for road use.
Chemical toilet, storage compartment,
shuttered windows and lockable doors
908 10000 litre single axle water bowser. With lights
and brakes. Recently built for sprayer filling and
livestock drinking water but unused due to a
change in policy*
909 Small single axle sheep trailer
910 Towable water bowser with 240v electric
pump
911 Marshall 7T twin axle tipping trailer. With
double drop sides. Model number 7246*
912 Richard Western 10T twin axle tipping
trailer. 1994. Serial number 8879. With manual
tailgate, roll over sheet and super single wheels
and tyres*
913-919 Spare Lots
Vehicles
920 Three wheel works shunter with single cylinder
diesel engine. Ex-Stafford Allen factory, Long
Melford
921 Hayter Heritage 13/30 ride-on mower
922 Kawaski 250cc ATV trike*
923 Loncin 300cc 2WD Quad bike. Registration
AU08 DRZ*
924 Canopy to fit 2002 Ford Ranger double cab
pickup, in blue*
925 Ransomes 3 wheel groundsman vehicle. Fitted
with Kohler petrol engine. Model KS825. 289
hours. With PTO hydraulics, tipping buck,
detachable body and low ground pressure
wheels and tyres. Owned from new
926 Ransomes Parkway 2250 4WD 38hp 3 gang
hydrostatic gang mower. 3119 hours. With
Kobota 4 cylinder diesel engine*
927 Kioti Mechron 2200 diesel 4WD utility vehicle.
Registration AY11 FJE. 900 hours. July 2011.
New tyres December 2015*
928 Approx. 14ft day cruising boat with galvanised
road trailer and Mercury 35hp outboard
929 Leyland DAF 45/150 4x4 lorry. Registration
H576 JDE. Showing 156000 kilometers.
Ex-MOD. First in service 1990. Fitted with
Cummins 6 litre engine, drop side cargo body,
permanent 4WD, high-low diff lock, rear
Nato hitch. 5T capacity. Taxed as an
agricultural vehicle and on red diesel*
930 Isuzu Rodeo 2.5TD Denver double cab pickup.
Registration AO59 BMV. 8348 miles. VIN:
MPATFS86HAH502095. MOT until
February 2017. Owned from new.*
931-938 Spare Lots
Plant
939 Pedestrian petrol driven tar sprayer*
940 Belle site cement mixer with Lister diesel
engine
941 Diesel cement mixer with starting handle
942 Winget site cement mixer, (for spares/repair)*
943 Hydrovane road tow compressor with Ford 4
cylinder industrial engine*
944 Road tow compressor with Ford engine.
Vendor reports that the compressor requires
attention*
945 SDMO single phase generator powered by
Mitsubishi 4 cylinder diesel engine. In
cabinet. 2008.*
946 Powerfab towable mini digger. Fitted with
Honda petrol engine. With three buckets*
947 Debrow "The Crushman" trailed concrete
crusher. On twin axle fast tow trailer chassis.
Serial number TC1108. 2008. Jaw crusher.
Will accept material of 200mm x 150mm
and crush down to average 40mm
(variable). Powered by an Atlas CopCo
Hydraulic LP13-30P 13hp hydraulic power
pack with Honda engine. Power pack is
removable. Crusher unit is removable on
pallet tines to be used on loader etc. Also
with Atlas CopCo LH28E hydraulic
breaker gun, hoses and two chisel
948 Red Rhino 5000 Series mini crusher. 2008.
Remote control. Tracks. 1941 hours. Single
toggle jaw crusher. Gross weight 2.9T. Jaw
aperture 500mm x 250mm. Output 10-100mm
material at 15-20T/HR. £10k manufacturer
overhaul circa 6 months ago*
949 Manitou Manitool 2WD Industrial loader
tractor. Registration F343 JBH. Clock stopped.
14.R24 rear wheels and tyres @ 75%. With self
levelling loader and rear road compressor
(compressor requires attention)
950 Ford 555 2WD digger. Registration to follow.
4984 hours. 18.4-28 rear tyres @ 70%. Fitted
with JCB Q-fit headstock, (no bucket). Two
rear buckets. X-block engine fitted circa 1000
hours ago.*
951 JCB 3CX SiteMaster 4WD digger. Registration
B819 WKP. Hours to follow. Serial number
309891. With 4 in 1 front bucket, pallet tines,
Extendadig, torque converter gearbox. Perkins
engine. 3ft 18" trenching and digging buckets*
952 Thwaites 3T 4WD dumper. With electric
start and hydraulic tip
953 Kubota u50-3a zero tail swing 5T rubber
tracked digger. 2004. c.3500 hours. Piped for
breaker. With set of buckets and blade
954-959 Spare lots
Tractors
960 Iseki 2160 4WD compact tractor. With 3
cylinder diesel engine.
961 Massey Ferguson 1215 4WD compact tractor.
147 hours. Serial number N-V4902. 29 x 12.00-
15. rear wheels and turf tyres @ 95%.
220.5x8.00-10 front wheels and turf tyres @
95%. Folding roll bar, 2DA spools. Two owners
from new. Coupled to Major MR150 finishing
mower. Serial number A12035. 2005
962 Nuffield 460 2WD tractor. Registration 480
LRT. 2370 hours. Serial number 24T26082.
Date of first registration 23/03/1962. For
restoration. Understood to have been owned
from new
963 Fordson Diesel Major 2WD tractor.
Registration NRT 605. Serial number
1241578. Date of first restoration 10/03/1953.
For restoration. Understood to have been
owned from new
964 Ferguson TEA 20 2WD tractor. French built.
For restoration.
965 Ferguson TED 20 petrol/TVO 2WD tractor.
1952. Serial number TED256912. India Farm
Tractor closed cleat 10x28 rear wheels and
tyres @ 80%
966 Ferguson TEA 20 2WD tractor. Registration
KBJ 234. Serial number TEA109487.
1949. 11.2/10/28 rear wheels and tyres.
Converted to petrol/TVO. With T-bar and
pick-up hitch
967 David Brown Cropmaster 2WD tractor. 1953.
Registration VTW 286. Fitted with Series III
Land Rover 2.2 diesel engine.
967A McCormick International Farmall Cub 2WD
tractor. Model FFUB. Serial number 710026. 8
-24 rear wheels and tyres. French built example
that was purchased by the Vendor in France.
has a new battery and reconditioned carb. Fitted
with mid-mounted mower
968 David Brown Selectomatic 880 2WD tractor.
Registration WJR 684 (no paperwork). 6531
hours
969 Massey Ferguson 135 2WD tractor.
Registration RCF 629H. 1970. Serial number
149098
970 Massey Ferguson 165 2WD tractor.
Registration FBJ 761J. 2376 hours. Serial
number 165 596641 FG. 12.4-36 rear wheels
and tyres @ 90% with part Flexicab and pick-up
hitch
971 Ford 4000 2WD tractor. Registration ART
181H. 8311 hours. Serial number B871747.
Date of first registration 14/10/1969. 12.4-36
rear wheels and tyres
972 Ford 4000 2WD tractor. Registration SAH
583M. 6960 hours. Serial number 937661. Date
of first registration 13.6.74. 12.4/11-36 rear
wheels and tyres @ 40%. Fitted with extended
Horndraulic power loader with Suton muck
fork and bucket. Sanderson bracket mounted
fork lift to rear. Two former keepers*
973 International Harvester 454 2WD tractor.
Registration NBJ 740P. 3090 hours. Date of
first registration 5.5.76. Serial number 103550.
12.5R36 rear wheels and tyres @ 30%. With
counter weight and Tanco 968 power loader
with muck fork
974 Leyland 270 2WD tractor. Registration KY0
491P, (no paperwork). 4857 hours. Fitted with
MIL quick attach loader
975 John Deere 2030 2WD tractor. Not road
registered. Clock stopped. 12.4R38 rear wheels
and tyres*
976 Set of rear grass tyres to fit John Deere 2030*
977 International Harvester 856XL 4WD tractor.
Registration B431 XEG. Circa 6500 hours.
16.9R34 rear wheels and tyres @ 70%. 12.4R24
front wheels and tyres @ 70%*
978 Same Leopard 90 4WD tractor. Registration
YPV 199Y. 6979 hours. 42/85R34 rear wheels
and tyres. 14.9R24 front wheels and tyres.*
979 Lightforce Duluxe 4514 4WD tractor.
Registration N943 JBJ. 1083 hours. Serial
number 0089954. 16.0R30 rear wheels and tyres
@ 80%. 11.2R24 front wheels and tyres @ 80%.
Owned from new
980 John Deere 2040S 4WD tractor. Registration
B950 LPV. 8597 hours. Serial number 524269.
13.6R38 rear wheels and tyres. 280/85R28 front
wheels and tyres. Fitted with SG2 cab, air
conditioning, front weight box and 2 DA
spools*
981 Ford 6610 Dual Power 2WD tractor.
Registration AHK 397X. 6848 hours. Serial
number 519652. Date of first registration
7.1.1982. 13.6/12-38 rear wheels and tyres @
40%. Column change gearbox and X-block
engine. One former keeper*
982 Ford 7810 Force II 4WD tractor. Registration
F73 0PV. 5083 hours. Serial number B64833.
Date of first registration 24.9.88. 16.9 R38 rear
wheels and tyres @ 80%. 14.9 R24 front wheels
and tyres @ 40%. 2x DA spools. One former
keeper*
983 Case IH JX90 4WD tractor. Registration AY12
BD7. 6207 hours. 2012. 420/85R24 rear wheels
and tyres @ 80%. 340/85R24 front wheels and
tyres @ 80%. Fitted with MX U8 loader with
3rd service, joystick control, parallel lift and soft
ride.
984 John Deere 6920 4WD tractor. Registration
PL03 JXW. 8050 hours. 2003. 540/85R38 rear
wheels and tyres @ 20%. 420/85R28 front
wheels and tyres @ 15%. Fitted with extra work
lights, glass sun roof, Auto Power 50 kph
gearbox, air brakes and TLS front suspension*
985 McCormick MTX150 4WD tractor.
Registration AU56 FTX. 5,620 hours. 520R42
rear wheels and tyres @ 65%. 16.9R28 front
wheels and tyres @ 65%. Fitted with 40 KPH
gearbox, front linkage, PTO, front suspension
and cab suspension*
986 Case IH 115A 4WD tractor. Registration
AY14 FHE. 339 hours. Serial number
ZEJP06069. 420/85R38 rear wheels and tyres
@ 95%. 13.6R28 front wheels and tyres @
95%. Fitted with Trima X31 loader with 3rd
service, Euro 8 headstock and joystick control.
Owned from new*
987 JCB Fastrac 1135 4WD tractor. Registration
R730 KRY. 8100 hours. 480R28 wheels and
tyres. Rears at 70%, fronts at 25%. 50kph
gearbox and air brakes.*
988-999 Spare Lots
Self Propelled Sprayers
1000 Chaviot 24M 2WD self propelled sprayer.
Registration E397 RUH. Date of manufacture
20th December, 1987. Clock showing 3388
hours but believed to have stopped. Serial
number 228 9.5-48 rear row crop wheels and
tyres. J19 Turbo Land Rover engine. Landquip
spray equipment with 24m aluminium booms,
2000 litre tank and variable rate RDS control*
1001 Bateman Contour HiLo 24M 4WD self
propelled sprayer. Registration H402 DTA.
13,567 hours. 48x25.00-20 floatation wheels
and tyres. With twin line booms, RDS control
and foam marker*
1002 Set of 4 12.4-32 TZ13 row crop wheels and
tyres to fit Bateman sprayer @ 40%*
1003 SAM 3000 Low Line 24M 4WD self
propelled sprayer. Registration S64 VEX.
4062 hours. Serial number to follow.
600/60R28 floatation wheels and tyres @ 90%.
Fitted with Duetz air cooled engine and test
until October 2016.*
1004 Set of 4 380/85R28 row crop wheels and
tyres to fit SAM sprayer*
1005 Bateman RB35 36M 4WD self propelled
sprayer. Registration WA07 JTO. 8650
hours. Serial number 2007035. 380/85R34 row
crop wheels and tyres. With 4000 litre
tank, 12/24/36 VG Contour boom, Immovilli
pump, stainless steel spray line re-circulation,
triplet nozzles and 2nd line with single nozzles,
AG Leader Insight auto section control,
field mapping and variable rate control system.
AG Leader integrated auto steer. Norac auto
boom levelling. Lift, lower and variable
geometry control. Maintained by
Bateman Sprayer engineer. Two owners from
new.*
1006 Set of 4 floatation wheels and tyres to fit
Bateman RB35*
1007-1015 Spare Lots
Combines
1016 Ransomes MST42 trailed combine. 4ft cut.
PTO driven. Bagger model. Vendor reports
that this is in original condition, majority of
working parts are operational except for knife
which requires freeing off. Offered for sale
minus canvases, and has been dry stored for
some time. Purchased by the vendor in
1992 from the original owners Messrs. R.P.
Abbott & Son, Cragpit Farm, Tattingstone who
purchased the combine new to replace a binder
and for use behind an early Fordson E1A Diesel
Major.
1017 Allis Chalmers Allcrop 60 trailed combine. 7ft
cut. PTO driven. Bagger model. Last used 1997
and dry stored since. Offered for sale with some
spares. Vendor purchased the combine in 1993
from Wenhaston.
1018 Claas Mercury combine. Registration KRT
83D. Serial number 207927. Date of first
registration 22/08/1966. 14.9-13 front wheels
and tyres, with 9ftheader. Believed to have
been owned from new
1019 Claas Dominator 58 combine. Registration
C650 UGV. 740 hours. Serial number
15400355. Date of first registration
13/07/1986. 18.4-26 front wheels and tyres @
90%. With 10ft header. Owned from new
1020 Claas Dominator 86 combine. Not road
registered. 2911 hours. Serial number 0870
2332. 23.1-26 front wheels and tyres @ 60%.
15ft header, header trailer and straw chopper.
Vendor reports that the combine was used
harvest 2015 and that it had some refurbish
work carried out by dealers approx. 60 acres ago
to include rebuilt engine*
1021 New Holland Clayson 8060 combine. Not road
registered. 2711 hours. Serial number 4327038.
18.4-30 front wheels and tyres @ 80%. With
straw chopper, 12ft header and header trailer.
Last used 2013 and dry stored since*
1022 Deutz Fahr 6095 HTS Combine. Registration
AY12 EBC. 965 engine hours. 718 drum hours.
Serial number 6228015030. Type 6228. Year of
Manufacture 2012. 800/65R32 wheels and tyres
@ 95%. With straw chopper, DH 630A header
and single axle header trailer. 1 owner from
new. Offered for sale due to upgrade to larger
machine.*
1023 Deutz Fahr rape extension to fit DH 603A
header with hydraulic and electric side knives.*
1024-1029 Spare Lots
Lot 986
Lot 1001
Lot 1016
Lot 1018
Lot 982
TERMS AND CONDITIONS OF SALE - MACHINERY
1. INTRODUCTION The following defining terms are used in these conditions:-
“Auction” Means any auction conducted by Clarke and Simpson Auctions Ltd either at the premises owned by them or elsewhere (including any internet based auction);
“Auctioneer” Means Clarke and Simpson Auctions Ltd auctioneer as appropriate;
“Bidder” Means a bidder at an auction, including the bidders personally present at the venue and those bidding by telephone or over the internet or otherwise;
“Buyer” Means the bidder whose bid was the last bid when the auctioneer concludes the bidding;
“Conditions” Means these Terms and Conditions of Sale;
“Hammer Price” Means the level of bidding reached (at or above any reserve) when the auctioneer brings the bidding to a close;
“Lot” Means any property accepted by Clarke and Simpson Auctions Ltd for offer at auction;
"Vendor" Means the individual or other party offering a lot for sale.
2. DESCRIPTION No warranty is given or implied by the description in the catalogue. Each lot is sold in its condition at the time of sale with all faults, defects, imperfections and
errors of description (if any). Whilst every endeavour has been made to describe the items adequately and properly, the buyer shall deem to have inspected the lot at time of purchase. All
catalogues and Buyer’s guides are for information only and do not form part of the contract.
3. VARIATION OF LOTS The auctioneers reserve the right to withdraw, consolidate or divide any lot or lots or submit them in any order that they deem desirable. The auctioneers
will use every endeavour to ensure that all lots listed in the catalogue are presented for sale, but cannot accept any responsibility for the lots not being presented. Nor can they entertain any
claim for expenses incurred in abortive attendance at the sale.
4. THE AUCTION All auctions are conducted at the absolute discretion of the auctioneer. The auctioneer shall conduct the auction with reasonable skill and care. The vendor reserves
the right to sell subject to reserve price in respect of all lots. What constitutes a bid shall be at the absolute discretion of the auctioneer, acting with appropriate skill and care. The
auctioneer shall have the right to refuse any bid in all cases but most notably when such a bid does not exceed the previous bid by at least 10% or such a proportion as the auctioneer shall in
his absolute discretion direct. Where two or more bids at the same level are simultaneously received by the auctioneer, the auctioneer at his absolute discretion shall determine which bid to
prefer. Subject to the foregoing where two or more bids are at the same level are simultaneously received by the auctioneer, any bid submitted in the room shall take preference over a bid
submitted by telephone or internet at the same level. Any bid made or attempted by telephone or over the internet will only be deemed to have been made if received by the auctioneer.
The auctioneer has the right at his absolute discretion to refuse admission to his premises or attendance at (or participation in) any auction by any person. In the case of any dispute, the
auctioneer shall be sole arbitrator in any matters arising during or out of the sale.
5. BIDDERS All bidders will be required to register their particulars, bidders attending in person and those accompanying them will be required to provide photo ID and separate
confirmation of address prior to viewing or taking any part of the sale and before entering any part of the premises to view. All bidders accept full liability for all bids submitted. Subject to
the clause in this document headed “The Auction”, the highest bidder at the close of bidding shall be the buyer. Any dispute about a bid shall be settled at the auctioneer’s absolute
discretion. Bidders are all deemed to act as principles unless there is prior written acknowledgement by the auctioneers that a bidder is acting as an agent for a named principle. Bidders
are strongly encouraged to attend the auction in person. Bidders shall be responsible for any decision to bid for a particular lot and shall be deemed to have carefully inspected and satisfied
themselves as to condition. The auctioneers or their employees or agents shall not be responsible for any neglect or default in doing or failing to do so. Bidders will be given ample
opportunity to view and inspect before the sale and prospective buyers must satisfy themselves as to all matters. The auctioneers, their employees or their agents or the vendor accept no
liability for the correctness of specific opinions and all conditions and warranties, expressly, implied or statutory are hereby excluded.
Number bidding will be used for speed and efficiency as in all our sales. All prospective buyers must complete the form supplied and register in the office prior to bidding at the sale to
receive a number for bidding.
6. PAYMENT All lots shall be paid for upon the day of the sale and the auctioneers reserve the right to refuse removal of lots when payment is proposed by cheque and the buyer is
unknown to them. To avoid such inconvenience payment should be made by cash, bankers draft, debit card or credit card (all credit cards and international debit cards are subject to a 2.5%
plus VAT surcharge) and any alternative form of payment (by those unknown to the auctioneers) must be arranged with the auctioneers prior to the sale. Credit and debit card payments
will only be accepted on a chip and pin basis with the cardholder present. After the fall of the hammer, the lot shall be at the buyer’s risk. It is expressly stated that the auctioneers will not
be responsible for its safe custody. Due to Money Laundering Regulations 2007, the auctioneers cannot accept cash payments in excess of £10,500 (inc. VAT) from any one person. All
money received will be held in Clarke & Simpson Auctions Limited Clients Account at Barclays Bank plc, 4 Church Street, Woodbridge, Suffolk. Account Number 33222276. Sort Code
20 98 07.
7. OVERSEAS PAYMENTS Overseas payments should be made by inter-bank transfer using Swift to Barclays Bank plc, 4 Church Street, Woodbridge, Suffolk. Sort Code 20 98 07,
quoting Clarke and Simpson Auctions Ltd, Clients Account number 33222276. IBAN Code: GB47BARC20980733222276. SWIFT CODE: BARC GB 22.
8. INVOICE ALTERATIONS After the sale day, Clarke and Simpson Auctions are not able to change or amend any invoice. Buyers should be entirely clear that this includes
changing the VAT status of the buyer, or the name and address of the buyer. It will not be possible to transfer lots between buyers after the sale day. There are no exceptions to this rule.
9. DEFAULT The auctioneers shall act as agent of the vendor only. Any contracts for the sale of a lot shall be formed between the vendor and the buyer. As agents only, the auctioneers
shall not be responsible for default by the vendor or the buyer. If any lot is not paid for in full and taken away in accordance with these conditions, or there is any other breach of the
conditions, then the auctioneers, as agent for the vendor, shall at their absolute discretion and without prejudice to any other rights they may have, be entitled to exercise all or any of the
following rights and remedies:-
a. to proceed against the buyer for any action of debt or damages for breach of contract;
b. to rescind the sale of that lot or lots sold by Clarke and Simpson Auctions Ltd to a defaulting buyer;
c. to resell the lot (by auction or private treaty) in which case the defaulting buyer shall be responsible for any resulting deficiency in the total amount due (after crediting any part
payment and adding any resale costs), any possible surplus so arising shall belong to the vendor;
d. to remove, store and insure the lot at the expense of the defaulting buyer and, in the case of storage, the location of such storage shall be at Clarke and Simpson Auctions Ltd
discretion;
e. to charge interest at a rate of 2% per month of the total amount due to the extent that it remains unpaid for more than two working days after the sale;
f. to retain that or any lot sold to the defaulting buyer until the buyer pays the total amount due;
g. to reject or ignore bids from the defaulting buyer at future auctions or to impose conditions before any such bids are accepted;
h. to apply any proceeds of sale for any other lots due or in the future becoming due to the defaulting buyer towards the settlement of the total remaining due.
10. INDEMNITIES, PENALTIES AND LIMITATIONS OF LIABILITY Buyers shall pay for any damage done by themselves or their agents during the removal of their lots.
Attendance at the sale shall be at the risk of those attending in respect of both themselves and to their goods and vehicles. Any indemnity under these conditions will extend to all actions,
costs, expenses, claims and demand whatsoever suffered or incurred by the person entitled to the benefit of it and the auctioneers declare themselves to be a trustee of the benefit of such
indemnity so far as it is expressed to be the benefit of its employees and agents. Whilst the auctioneers endeavour to ensure that the information on their websites is correct, neither party
warranty the accuracy and completeness of the material on their website. Also the auctioneers can make changes to the material on their website, or alter the products and prices described
on it, at any time without notice. The material on the website may be out of date, the auctioneers make no commitment to update such material. All material on the websites is provided
“as is” without any conditions, warranties or other terms at any time. Accordingly to the maximum extent permitted by law, the website is provided to all parties on the basis that the
auctioneers exclude all representations, warranties, conditions and other terms which, but for this legal notice, might have effect in relation to the website.
11. ELECTRICAL SAFETY REGULATIONS All electrical lots are subject to electrical safety regulations and fall within “the low voltage electrical equipment (safety) regulations
1989” and therefore any non-compliant items may only be purchased by a trader who is in the business of repairing or reconditioning such items to comply with these regulations.
12. GENERAL MATTERS Any notice to any buyer, vendor, bidder or viewer may be given by first class mail or email in which case it shall be deemed to have been received by the
addressee forty eight hours after posting or sending. All notices to the auctioneers must be sent in writing and email is not acceptable. Any indulgence extended to any person by the
auctioneers notwithstanding the strict terms of these conditions or the terms of consignment shall affect the position at the relevant time only and the respect of that particular concession
only; in all other respects these conditions shall be construed as having full force and effect. Their conditions and any disputes or claims arising out or in connection with them or their
subject matter or formation (including non-contractual disputes or claims) are governed by and construed in accordance with the law of England. The parties irrevocably agree that the
courts of England have exclusive jurisdiction to settle any dispute or claim that arises out of or in connection with the agreement or its subject matter or formation (including non-
contractual disputes or claims).
13. PUBLICITY Any catalogue and buyer guide are provided for information only and do not form part of these conditions. The catalogue and the buyer guide may contain additional
terms and conditions. The auctioneers reserve the right to use any photographs, back ground information and research for publicity purposes both before and after the sale. This includes
publication on their website.
14. BUYERS FROM E.C. COUNTRIES Under E.C. regulations, goods purchased at our sale will be zero rated for VAT purposes, subject to all of the following conditions being met:
a. The Auctioneers are in possession of your VAT/FISCAL Number (which will be verified with UK Customs & Excise) at the time of purchase. All new VAT registered buyers must
supply a copy of their VAT registration certificate prior to the goods being collected.
b. The goods are sent or transported out of the UK to a destination in another EC Member State.
c. The Auctioneers receive valid commercial documentary evidence that the goods have been removed from the UK within three months of the date of the sale.
If you are not registered for VAT in your member state or are unable to provide us with any of the above information, VAT at the standard UK rate will be payable and will not be
reclaimable.
15. BUYERS FROM OUTSIDE THE EC A VAT Deposit equivalent to the standard rate of UK VAT (currently 20%) will be charged on all lots which are being exported outside
the E.C. Refunds of VAT deposits will be dealt with under H.M. Customs and Excise regulations as set out in the current Notice 703. The minimum requirement of satisfactory
evidence of export required to allow a refund is an original Bill of Loading or Certificate of Shipment issued by a recognised Shipping/Transport Company or a S.A.D. stamped by
Customs & Excise and clearly identifying the goods which have been exported.
16. INSURANCE OF GOODS All vendors and buyers must be entirely clear that they, as vendor or buyer are solely responsible for the goods standing at the Auction Centre. If
required, you must make your own insurance arrangements in this regard.
17. V5 REGISTRATION DOCUMENTS Unfortunately, some vendors are unable to provide a V5 registration document for tractors and other road registered vehicles which have
been sold at auction. As auctioneers, we give no warranty in this regard.
18. FARM SAFETY REGULATIONS The attention of buyers of agricultural tractors and machinery is drawn to the provision of the Health & Safety at Work Act 1974, the
Agricultural (Field Machinery) Regulations 1962, Agricultural (Tractor Cabs) Regulations 1974 and all other acts and regulations applicable to farm safety. Buyers are reminded of the
provisions of the above Acts regarding the safety guarding of machinery and implements, and that some of the machinery sold at the Auction Centre may not immediately comply with
the regulations issued thereunder. It is an offence to use any machinery which does not comply with the regulations laid down in the Acts and Regulations and accordingly, it is a
condition of the contract of sale relating to such machines and implements that any buyer shall satisfy himself as to any statutory requirement for the use of any item and no liability
shall rest with the vendors nor the auctioneers. Vendors are required to take sufficient steps to ensure that the lots entered are safe and without risk to health at all times when being set,
used, cleaned or maintained by a person at work and in observation of proper health and safety procedures and so far as is reasonably practical, the vendor has carried out or arranged to
be carried out, of suitable testing and examination to ensure that there will be no risk to safety (taking into account the age and condition of the lots).
The vendor also undertakes to provide the buyer all operators’ handbooks and instruction manuals. If required to do so and if possible, the vendor further undertakes to provide the
buyer with an explanation about the use for which the lot is designed and about any issues necessary to ensure it will be safe and without risk to health at all times.
19. HEALTH AND SAFETY PRECAUTIONS The Auction Centre site includes items of working machinery and those persons attending are advised to take all reasonable
precautions to avoid accidents. We have a duty to strive to improve safety for both our staff and the public wherever possible and the following precautions must be adhered to by all
those entering the Auction Centre.
a. No tractors or machinery to be left running. Vendors and buyers must at all times maintain supervision of machinery and vehicles when running.
b. Children and dogs are to be kept under supervision at all times.
c. Tractors and machinery are not to be driven around the Auction Centre, other than for the purpose of loading or unloading.
d. Please note that the speed limit at the Auction Centre is 5mph. Please be aware of pedestrians.
e. Smoking is not permitted within the Auction Centre buildings or around tractors, machinery or engines.
f. All loader arms are to be lowered and the contents of the buckets emptied.
g. If starting tractors across the solenoid, please ensure two people are present, one person being in the driving seat having control of the clutch and brakes, and that the tractor is in
neutral.
h. Prior to unloading, please check brakes, clutch and position of the engine stop.
These rules apply to everyone attending the Auction Centre with no exceptions. Failure to observe these and other safety precautions or other acts of recklessness could result in
exclusion from the Auction Centre on a temporary or permanent basis. All mechanical loading and unloading takes place at the vendors' or purchasers' risk.
PERSONS ATTENDING THE AUCTION CENTRE SALE GROUND DO SO AT THEIR OWN RISK.
20. VENDORS' COMMISSION Vendors shall pay commission to the auctioneers at the following rates:-
a. Lots with a hammer price of over £3,000 – 6% plus VAT of the hammer price (exclusive of VAT)
b. Lots with a hammer price between £1,000 and £3,000 – 7.5% of the hammer price plus VAT
c. All other items – 10% of the hammer price plus VAT with a minimum charge of £3 plus VAT per lot.
d. VAT at the standard rate will be charged on all commissions.
e. Commission at the rate specified in clause 20a above together with the Entry Fees as specified in clause 21 below, shall be payable by the vendor on all lots sold at the Auction
Centre.
f. PAT testing will be undertaken on all qualifying electrical items offered for sale. The charge for this will be £3 plus VAT per item in addition to all other charges.
We guarantee all vendors either the lot or payment. We do not make payment to vendors until we have been paid by the purchaser. We will retain the lot until payment is made.
21. ENTRY FEES Entry fees on all lots sold, unsold, entered but not forward shall be charged at £5 plus VAT per lot.
22. BUYERS' PREMIUM All purchases will be subject to the following premium.
a. Lots £1,001 and above - 3% of the hammer price plus VAT with a maximum charge of £1,000 plus VAT
b. Lots from £201 to £1000 - 5% of the hammer price plus VAT.
c. Lots up to £200 - 10% of the hammer price plus VAT.
d. Any purchase made via “www.the-saleroom.com” or “www.i-bidder.com” will be subject to an administration charge of 1% plus VAT on the hammer price.
Please be entirely clear that the Auctioneer’s decision is final in this regard.
23. ENTRY OF LOTS FOR SALE All lots must be delivered to the Auction Centre by arrangement with the auctioneers and any reserve prices must be set out in writing and
handed to the auctioneers’ office at least 96 hours prior to the sale otherwise no responsibility can be accepted by the auctioneers for errors in respect of reserve prices. All lots brought to
the Auction Centre must be offered for sale by auction and must not be sold privately before the sale. In the event that any private transaction takes place following a sale whilst the lot
remains in the auction centre they must be notified to the auctioneers. Such transactions will be treated as a sale of the lot by the auctioneers. If a lot remains unsold following the sale
for which it has been entered and remains in the auction centre, the auctioneers reserve the right to sell such lot at the reserve price without further consultation with the vendor.
Following the sale of any tractors, vehicles and other self-propelled machines, the auctioneers shall not pay over the purchase price to the vendor until such time as the vendor has given
to the auctioneers the registration document for such tractors, vehicles or other self-propelled machines if the vendor has stated on the entry form that the registration document will be
supplied. The auctioneers reserve the right to annul and cancel any sale where the vendor has stated on the entry form that the V5 registration document is supplied and whereupon the
said document is not delivered to the auctioneers within fourteen days of the day of the sale. The auctioneers also reserve the right to apply for a duplicate V5 registration document and
charge the vendor the DVLA fee for such a duplicate together with an administration fee equivalent to 30% plus VAT of the DVLA charge. Where the vendor does not show the V5
registration document as being supplied these charges will not apply. In the event the sale is rescinded, the vendor will be responsible for any cost of transport incurred in the lot being
transferred to or from the auction centre or any other agreed location.
24. TITLE The vendor undertakes that the items entered for the sale are their sole property and are not subject to any hire purchase, lease, contract hire arrangement or any other
contract, and that they shall abide by these Standard Terms and Conditions of Sale. The vendor further warrants that all the information supplied by them or their agents, is accurate
and agree to indemnify any buyer against any liability howsoever arising in respect of the goods being received at auction or in respect of any inaccuracies in the above information and
against all costs and expenses incurred in dealing with any claim arising in that respect. The vendor certifies that they have notified the auctioneers in writing if any of the items entered
have been recorded by any insurance company as a write-off or have been subject to a major insurance claim.
25. ONLINE BIDDING Clarke and Simpson Auctions Ltd may offer an online bidding service via i-bidder for bidders who cannot attend the sale. In completing the i-bidder.com
registration on i-bidder and providing your credit card details and, unless alternative arrangements are agreed with Clarke and Simpson Auctions Ltd, you:-
a. authorise Clarke and Simpson Auctions Ltd, if they wish, to charge the credit card given in part or full payment, including all fees, for items successfully purchased in the auction
via i-bidder.com, and
b. confirm that you are authorised to provide these credit card details to Clarke and Simpson Auctions Ltd through i-bidder and agree that Clarke and Simpson Auctions Ltd are
entitled to ship the goods to the card holder name and card holder address provided in the fulfilment of the sale.
Please note that any lots purchased via i-bidder.com live auction service will be subject to an additional 1% commission charge plus VAT at the rate imposed on the hammer price, as
detailed under clause 22, Buyer’s Premium.
26. REMOVAL OF LOTS Some of the lots will be in a building and lots in the buildings cannot be removed whilst the sale is continuing in that building. Subsequently lots can be
removed during the sale and subject to conditions regarding payment, all lots must be removed by the Thursday following the sale. Any lots remaining on the site after this time will be
charged a storage fee of £50 per day (or any part thereof). Storage charge must be paid in full prior to the release of the goods. Clarke & Simpson Auctions Ltd. reserve the right to re-
sell by any means any lots left on site for more than 7 days following the date of the sale in order to clear the site and recover costs. Attention is drawn to buyer’s responsibility after the
sale as stated previously.
27. HOURS AND MILEAGE Hours and mileage and other detail is as at the time of cataloguing not at the time of sale. Bidders must satisfy themselves in this regard.
28. EXCLUSION OF LIABILITY The Auctioneers shall not be liable for any expense, loss, claim or proceedings in respect of personal injury to or death of any person arising out
of or in the course of or caused by the sale, except to the extent that the same is due to the negligence of the auctioneers.
29. GOVERNING LAW AND JURISDICTION For the avoidance of doubt, all contracts entered into between the buyer and vendor and between either of them and the
auctioneers on the basis of these standard terms and conditions, are governed by the laws of England and Wales and the parties hereby submit to the non-executive jurisdiction of the
English Courts.
Lot 887 Lot 757A
Lot 903
Lot 948
Lot 973
Lot 912
Lot 961
Lots 979 & 755