boq - lot 2.xlsx - undp | procurement notices

ITB 2017‐008

KINGDOM OF SAUDIA ARABIA THE SAUDI FUND FOR DEVELOPMENT ( SFD)

KINGDOM OF SAUDI ARABIA

PROJECT NAMEREHABILITATION WORKS FOR THREE NON -GOVERnMENTAL

SCHOOLS IN THE GAZA STRIP

SCHOOLE NAME Lot 2: ROSARY SISTERS SCHOOL

FUNDED BY KINGDOM OF SAUDIA ARABIA

THROUGH THE SAUDI FUND FOR DEVELOPMENT ( SFD)

IMPLEMENTED BY UNITED NATIONS RELIEF AND WORKS AGENCY ( UNRWA)

THROUGH UNITED NATIONS DEVELOPMENT PROGRAMME ( UNDP/PAPP)

BILL OF QUANTITIES CONSTRUCTION WORKS

CONSULTANT TECHNICAL ENGINEERING CONSULTING COMPANY

A Multipurpose Hall BuildingUnit Rate Total

$ Amount $ (A) M.P.H Building

Construction Works :Bill No. (1) Excavation & Earth Works

1 Demolish the existing external steps close to the existing ramp & remove safely all the debris from the site to approved places. The price shall include the repair and reinstatement of the existing situation to its original condition as per drawings and the engineer's instructions.

L.S 1

2 Excavation for foundations from natural ground level up to the required designed level. The works including:- The compaction of the soil surfaces to get (98% MDD).- The excavated material should be removed out from the site to the approved places.- All to be executed as per specifications, drawings and the engineer’s instructions.

M3 600

3 Supply, fill by using approved material (clean sand) around the foundations & inside the building up to the required levels, which shall be spread in layers not exceeding 25cm each one & compacted (98%) to reach up the required levels (under floor slab), according to the specifications & the engineer's instructions

M3 1100

Total of Bill No. (1)

ItemDescription

Unit Qty.

Contractor Signature Stamp


$ Amount $Item

DescriptionUnit Qty.

Bill No. (2) Concrete & Block Works A- Concrete WorksRates of Concrete Works shall include: - - All form works and shuttering in any form, shape and size. Making chamfered and curved edges, allowing for and making grooves and sleeves and the like; removal of forms and cleaning of all exposed tie wires and rods; making good the harmed surfaces and edges and all surface finishing.- Supplying, Casting, vibrating and curing as per specifications. - Approved additives and admixtures.- Incurred costs on Concrete Mix Designs, Sample taking, testing and providing test results certificates, storing and saving of samples.- Supplying reinforcement of any grade, size and length as detailed in the drawings, storing on site including cutting, bending and fixing in position and providing all tying wires, spacers, shop drawings, testing and bar bending schedules - Painting of exposed surfaces of underground reinforced concrete elements with primer and two coats of hot bituminous paint (75/25), the strokes of each layer to be opposite to each other.- Underground concrete elements prices are including expansion joints, flexcell sheets 18mm thick & mastic.- Steel bars used for alignment and fixing of reinforcement works, and extra steel added to assure proper detailing and safety.

-Supply & spread polythene sheets gauge 500 under the foundations & ground slabs.- Measurement of Concrete elements shall be the net dimensions as detailed in the drawings. All recesses openings and voids shall be deducted. - Measurement shall be only for the seen surfaces of elements. Overlapping and measuring items twice under separate headings shall not be allowed.- Columns are to be measured from the top level of the slab to the bottom level of the beam or dropped beam.- The concrete surface must be finished with mechanical steel trowel machine.All works must be done as per drawings, specifications & the engineer's instructions.

2.1 Supply & cast plain concrete B150 under the foundations m3 202.2 Supply & cast ready mix concrete B300 for reinforced concrete

foundations m3 2002.3 Supply & cast ready mix concrete B300 for columns necks as shown on

the drawings, specifications and the engineer's instructions. m3 42.4 Supply & cast ready mix concrete B300 for tie ground beams. m3 252.5 Supply & cast ready mix concrete B300 for external steps. m3 8



$ Amount $Item


2.6 Supply & cast ready mix concrete B250 for ground slab 10cm thick with steel mesh T8/20cm each way. m2 300

2.7 Ditto, but with the steps inside the M.P.H. including steel stirrupsT8/20cm & T8 for steps nose (see DWG. S03). m3 80

2.8 Supply & cast ready mix concrete B300 for columns as shown on the drawings, specifications and the engineer's instructions. m3 60

2.9 Ditto but for concrete walls (see DWG. S02 &S03). m3 502.10 Ditto but (200kg/cm2) for stop columns at roof. m3 72.11 Supply & cast ready mix concrete B300 for suspended hollow block slabs

25cm thick, including the hollow cement blocks, reinforced concrete hidden, inverted & drop beams & all the required materials.Girders (F) are not included in this item. m2 680

2.12 Ditto, but for suspended hollow block slabs 20cm thick, including the hollow cement blocks, reinforced concrete hidden, inverted & drop beams & all the required materials.

m2 1652.13 Supply & cast ready mix concrete B300 for Girders (F) at the suspended

hollow block slabs 25cm thick, including the steel reinforcement & all the required materials

m3 1002.14 Supply & cast ready mix concrete B300 for staircases flights & landings

including all required materials m3 152.15 Supply & cast ready mix concrete B250 for doors & windows lintels, sills

& canopies including all the required materials. m3 182.16 Ditto, but for parapet walls coping & external concrete elements. m3 52.17 Supply & cast 10 cm thick ready mix concrete B300 for staircase concrete

parapet walls (see DWG. S12). m3 32.18 Supply & cast ready mix concrete B250 for decorative concrete facade as

shown on the drawings, specifications and the engineer's instructions. m3 3B- Block Works: - The items include supplying hollow cement block from good and

2.19Supply & build hollow block walling 35cm thick, consists of external block20cm, internal block 10 cm and 5 cm thick Polystyrene, the price includesthe supplying of all the required materials. m2 360

2.20 Supply & build hollow block walling 20cm thick including the supplying ofall materials (block size 20 x 20 x 40cm). m2 390

2.21 Supply & build hollow block walling 10cm thick including the supplying ofall materials (block size 10 x 20 x 40cm). m2 250Total of Bill No. (2)



$ Amount $Item


Bill No. (3) Finishing Works _ The price shall include the supply of all materials, galvanized angles, and galvanized mesh not less than 50cm width, mixing, scaffolding, curing, site cleaning, equipment and workmanship required to complete the job according to the specifications, conditions of contract, drawings & engineer’s approval. _The rates of the following items shall be completed in accordance with the drawings; specs, details and as directed by the engineer. _The contractor must submit the shop drawings to the engineer's approval before starting the work. _Black basalt chips of size 4mm shall be used in the precast terrazzo items._ Grade (A) local marble (free from cracks, holes & pits, homogeneous in color and approved by the engineer must be used. _ All Tiling works must be filled & polished according to the engineer's instructions._ All materials used for painting shall be of high quality materials based on the British standards and must be approved by the engineer, paints and applying method must be as per the manufacturer’s instructions.

3.1 Supply & execute internal plastering 13mm thick to walls,cielings, soffits& columns including galvanized metal lath angles for columns, edges &chicken wire at the intersection of concrete & block works, pipes &cement rendering as per the engineer's instructions.

M2 1250

3.2 Ditto, but for external plastering 15mm thick to walls and soffits the priceincluding additional layer of 5mm thick lime free mortar (mix 1: 3) as perspecs, drawings and the engineer’s instructions. M2 150

3.3 Supply and install west bank smooth stone 5.0 cm thick with backingfilling 10.0cm (Grade B-200) with steel mesh 6mm dia @ 20cmm as perthe engineer's instructions. M2 90

3.4 Ditto but 5.0 cm thick with backing filling 5.0cm. M2 1403.5 Ditto but Molatash 5.0 cm thick with backing filling 5.0cm. M2 770



$ Amount $Item


3.6 Supply and install terrazzo floor tiles (grade A) size 25x25x2.5cm with marble chips laid on 2cm mortar bed and 5 cm thick sand bed and terrazzo skirting 30cmx 7cmx1cm including all materials and testing as per specifications, drawings, and the engineer's instructions.

M2 240

3.7 Supply and install local marble (grade A) size 35 cm wide x 3cm thick for windows sills laid on 2 cm thick mortar bed as per specifications, drawings, and the engineer's instructions. RM 25

3.8 Ditto but size 36 cm wide x 3cm thick for roof parapet. RM 1253.9 Ditto but size 76 x66 x 3cm thick for roof stop column M2 8

3.10 Ditto but threshold size 23 cm wide x 3cm thick for doors. RM 253.11 Supply and install Rosabita marble size 19 cm wide x2cm thick for

staircase parapet laid on 2 cm thick mortar bed as per specifications,drawings, and the engineer's instructions.

RM 1253.12 Supply and lay Rosabita marble stair treads size 36 cm wide x 3cm thick

chamfered once, rebated once and laid on 2cm thick mortar bed and theprice includes Rosabita marble stair risers size 12.0cm or 12.5 high x2cmthick and skirting 7/20cm high x2cm thick as per specs, drawings and theengineer ‘s instructions.

RM 165

3.13 Supply and install Rosabita marble (grade A) size 30x60x2cm thick forstaircase landings & stage floor laid on 2 cm thick white cement mortarbed as per specs, drawings, and the engineer's instructions. M2 50

3.14 Ditto but, Rosabita marble (grade A) size 30x60x2cm thick for entrancewalls laid on 2 cm thick white cement mortar bed as per specs, drawings,and the engineer's instructions.

M2 503.15 Supply and install colored none slipping ceramic (grade A) 8mm thick for

floor. M2 203.16 Supply and install colored glazed wall tiles (grade A) 6mm thick laid on

2cm mortar (1:3). M2 903.17 Supply and install colored Carpet (super logo) including the skirting. M2 5703.18 Supply and paint, plaster with one coat of bondrol primer and at least

two coat of External quality of colored emulsion paint (Supercryle) orequal approved as per specifications, drawings and the engineer'sinstructions.

M2 900

3.19 Supply and paint the internal walls up to a high of 2.2m above finishingfloor level two coats of putty, one undercoat primer and two coats ofcolored oil paint as per specifications, drawings and the engineer'sinstructions.

M2 950

3.20 Supply and paint one primer and minimum two coats of emulsion paint(Poliside) for internal walls, ceiling and drop beams as per specifications,drawings & the engineer's instructions. M2 200

3.21 Supply and install fire rated gypsum board 120cm width and 12mm thicksheets as per specifications, drawings, and the engineer's instructions.The price includes the galvanized columns, beams, angles, wires, paintingwith supercryle after two layers of putty, and all the needed materials tocomplete the job as per the manufacturer’s requirements. M2 660



$ Amount $Item


3.22 Supply and install gypsum tiles 60x60x1.5cm (Armstrong) as perspecifications, drawings, and the engineer's instructions.The price includes the galv columns, beams, angles, wires and all theneeded materials to complete the job as per the manufacturer’srequirements.

M2 220

3.23 Supply and cast foam concrete with fine aggregates for roof screening of ranging thickness from 4 to 15 cm and sand angle fillets size 5cmx5cm as per specifications, drawings and the engineer's instructions . M2 680

3.24 Supply and lay one layer of plasticized bitumen roofing membrane with chipping 4 mm thick, including priming concrete surface prior to laying, dressing into rain water outlets to form water proofing seal and cover the angle fillets. The rate include verticals parts skirting as per specification and drawings.Note: Measurement will be for the horizontal projection

M2 680




$ Amount $Item


Bill No. (4) Carpentry & Joinery Works 4.1 Supply, fix and paint wooden single internal flush door type D2 size

80x220x4.5cm according to the drawing, specifications and undersupervision.

No. 24.2 Ditto, but for type D3, overall size 70x 220x4.5cm thick No. 44.3 Ditto, but for type D5, overall size 90x 220x4.5cm thick No. 64.4 Ditto, but for type D8, overall size 100x 220x4.5cm thick No. 24.5 Supply and fix 120x20mm soft wood coat hook rail smoothed, plugged

and screwed to wall at 30cm center to center including priming andsanding sealer and two coats of varnish painting with Galvanized steelcoat hook screwed to rail at 20cm center to center as per the engineer’sinstructions.

RM 8

4.6 Supply and fix high quality colored foldable theatre chair fixed to floor.The color will be selected by the engineer.The chair base and back are fabricated from sandwich covered withmahogany and framed with painted natural timber. The base and backhave high density sponge and durable textile.The base size is 50x50cm and 45cm high from the floor and 105cm forthe back. The chair includes hidden arm for writing in addition to hardplastic cover for the base and back. All as per specs, drawings and the engineer's instructions.

No. 432




$ Amount $Item


Bill No. (5) Aluminum & Metal Works .The rates of the following items shall be Completed in accordance withdrawings, specifications, details and as directed by the engineer.. Door frames shall fit walls & sizes of door openings, taking intoconsideration the thickness of plastering on both sides of the frames.. Hardware for doors shall be Waley type with approved handles. .The aluminum windows are colored powder coated aluminum JordanianType 7000 / 4500 or approved equivalent with sliding leaves, frame,clear glass 4mm thick, fly screen ironmongery, and hardware andaluminum accessories..The aluminum will be tested in approved testing laboratory.. The contractor has to submit shop drawings to the engineer beforefabrication and installation.

5.1 Supply & install Mul-T-Lock door type 417 with overall size 125cm widthx 220cm height (D1) with powder coated paint. Door lock type 235 &Mul-T-Lock serrated cylinder. All to be carried out according to thespecifications, drawings & the engineer's instructions.

No. 2

5.2 Ditto, but with size 105 cm widths x 220cm height (D4). No. 15.3 Ditto, but with size 90 cm widths x 220cm height (D6). No. 35.4 Ditto, but with size 200 cm widths x 220cm height (D7). No. 15.5 Supply and fix powder coated colored aluminum window type "W4" size

150 cm width x 150 cm height, (Type 7000) sliding leaves, fly screenleaves, frame, clear glass 4mm thick, ironmongery, and hardware andaluminum accessories. All as per specs, drawings and the engineer’sinstructions.

No. 4

5.6 Ditto, but type "W5" size 150 cm width x 70cm height. No. 35.7 Ditto, but type "W6" size 220 cm width x 150cm height. No. 25.8 Ditto, but type "W7" size 80 cm width x 80cm height. No. 25.9 Supply and fix powder coated colored aluminum type 4500 for hinged

window type "W8" size 95cm width x 705cm height, unclear glass 4mmthick, ironmongery and hardware as per specifications and drawings. No. 2

5.10 Supply and fix galvanized steel protection for internal windows overallsize 240x70 cm type (W2), the prices including all the steel, the fixationaccessories, painting with one primer coat & two coats of oil paint, allaccording to the drawings, specification and engineer’s instructions.

No. 6

5.11 Supply and fix galvanized steel protection for external windows overallsize 150x150 cm type (W4), the prices including all the steel, the fixationaccessories, painting with one primer coat & two coats of oil paint, allaccording to the drawings, specification and engineer’s instructions.

No. 45.12 Ditto, but size 150x70 cm type (W5) No. 35.13 Ditto, but size 220x150 cm type (W6) No. 25.14 Ditto, but size 80x80 cm type (W7) No. 25.15 Supply and fix stainless steel handrail for stair case pipe1.5” internal dia.

2.5mm thick fixed to walls by stainless steel plate and 4 bolts stainlesssteel every 1.0m and 10cm space between wall and the pipe. All as perspecs, drawings and the engineer's instructions.

RM 20



$ Amount $Item


Total of Bill No. (5)Bill No. (6) Plumbing & Sanitary Works

6.1 Supply and fix white glazed porcelain hand wash basin size 50cm x 41cm(Vitra type 6602+6173) or approved equivalent, complete with all watersupply pipes ½", waste fitting, trap, plug and chain, chromium platedwater mixer 1/2" dia. Jack type) (From Artema-Armix or Hamat orapproved equivalent) and mirror 60x60cm, Supply & fix white glazedsoap tray tiled into block walls, steel brackets supports and the drainageline to floor trap 2”, all needed accessories & the pipe concreteencasement as per specifications, drawings and the engineer'sinstructions.

No. 6

6.2 Supply & fix white glazed porcelain squatting W.C. suite (HARSAEUROPEAN - TYPE or approved equivalent) complete with porcelainflushing cistern, pip hose, 1/2" dia. UPVC 100 cm long flushing pip hosefor toilets, seat & plastic cover, white glazed toilet paper holder tiled into block walls (size 15cmx15cm), 4" dia. P.V.C. drainage pipe to the nearestmain drainage line, all needed accessories & the pipe concreteencasement (as shown in the drawings (Vitra-Normus or approvedequivalent).

No. 6

6.3 Ditto, but higher than the standard with its stainless steel handrails one isfixed and the other one is movable where the type is Vitra for personswith special needs (Vitra-Normus or approved equivalent). No. 2

6.4 Supply and fix 1" dia. galvanized pipe for drop water pipe connectedfrom existing building roof tanks to the water line as shown on thedrawings and according to engineer's instructions, the price shall includeall necessary fitting, valves excavations , backfilling, concrete encasement& all needed materials to complete the job.

RM 15

6.5 Ditto but HDPE dia. 3/4" dia for cold water. RM 606.6 Supply and install UPVC pipes 4” diameter for drainage, with sockets joint

3.2 mm wall thickness. The work shall include the excavation, backfilling, jointing, and the pipe concrete encasement……. etc. to complete the job as per specifications, drawings and the engineer's instructions.

RM 15

6.7 Supply and install UPVC pipes 3” diameter for rain water drainage pipe, with sockets, pipe joints, caps, supports and all needed materials to complete the job as per specifications, drawings and the engineer's instructions.

RM 40

6.8 Supply and fix floor trap 4" diameter, complete with heavy duty brass grating & UPVC pipe to the nearest inlet with the pipe concrete encasement as per specifications, drawings and the engineer's instructions.

No. 10

6.9 Supply and install UPVC pipes 6” diameter for drainage, with sockets joint 4.7 mm wall thickness. The work shall include the excavation, backfilling, jointing, and the pipe concrete encasement, bedding and compacted backfilling with clean sand ……. etc. to complete the job as per specifications, drawings and the engineer's instructions. Also connect the sewer networks with the existing manhole as per drawings & the engineer's instructions.

RM 20



$ Amount $Item


6.10 Ditto but 4” diameter for vent-pipe. RM 106.11 Supply and install concrete manhole of internal diameter 60cm, and (50-

90) cm depth according to the required level, 12cm thick plain concretefor walls and base, slab, with cast iron cover with 8 ton bearing capacityaccording to I.S, specifications and drawings. The price includes theconnection to the existing manhole.

No. 3

6.12 ditto but 80 cm diameter with depth up to 2.2m. No. 16.13 Supply and install an approved water distribution galvanized steel 2mm

thick cabinets with galvanized steel doors with switch locks and hammerpaint for the distribution water network with any number of cold water &hot water outlets with polythene pipe HDPE 16 mm distribution pipesand the connection from the main supply drop pipe G.S.P. to thedistribution cabinets, air valves, gate vales, unions, supports and allaccessories needed to complete the job, all according to the drawings,specifications & the engineer's instructions.

No. 1




$ Amount $Item


Bill No. (7) Electrical Works The prices of all electrical works and installed equipment andcomponents listed below includes:- Shop drawings - As built - ...- Execution of all needed works & install all fittings and accessoriesrequired for operation.- All materials supplied (such as wires, pipes, electrical equipment…etc.)should be of the best quality and must be approved by the supervisingengineer.- The work includes maintenance period for each device according totradition in the field.- Oversees the installation and maintenance, a specialist in the field ofdevices - Supply, Erect & Commission the electrical equipment according to thedrawings, specifications and the engineer's instructions. Also the workshall include workman ship and all accessories needed to complete thejob.Lighting Fixtures

7.1 Supply and install surface mounting led light fixture ,1x32W, 1200mm ,230V,3700Lm, daylight complete with lamps , driver, and needed accessories as per drawings, specifications and according to supervisor engineer instructions.The price includes wires, conduits, fittings, accessories and any other needed materials and workmanship to complete the job as per drawings specifications and the engineer’s instructions. Also the fixture must be EU brand name , and according to EU specification

No. 25

7.2 Supply and install ceiling mounting round led light luminaire 18w withdriver ,230 V, 1850 Lm ,daylight complete with lamps and neededaccessories as per drawings, specifications and according to supervisorengineer instructions.The price includes wires, conduits, fittings, accessories and any otherneeded materials and workmanship to complete the job as per drawingsspecifications and the engineer’s instructions. Also the fixture must be EU brand name , and according to EU specification

No. 14

7.3 Supply and install spot led light recessed luminaire 30w with driver ,230V, 2900 Lm ,daylight complete with lamps and needed accessories as perdrawings, specifications and according to supervisor engineerinstructions.The price includes wires, conduits, fittings, accessories and any otherneeded materials and workmanship to complete the job as per drawingsspecifications and the engineer’s instructions. Also the fixture must be EU brand name , and according to EU specification

No. 46

7.4 Supply and install 60x60cm led light recessed luminaire 40w ,230 V, 3400 Lm ,daylight complete with lamps drivers and needed accessories as per drawings, specifications and according to supervisor engineer instructions.The price includes wires, conduits, fittings, accessories and any other needed materials and workmanship to complete the job as per drawings specifications and the engineer’s instructions. Also the fixture must be brand name type and according to EU specification

No. 106



$ Amount $Item


7.5 Supply & Install ceiling spot fixture 150W with halogen lamp daylight complete with all needed wires, conduits, fittings, accessories and any other needed materials and workmanship to complete the job as per drawings specifications and the engineer’s instructions. Also the fixture must be brand name type and according to EU specification

No. 68

7.6 Supply & Install stair light fixture LED 8W with driver, cool white,820Lm,IP65, complete for stairs (ST1 &ST2 &ST3) with all needed wires,conduits, fittings, and accessories and any other needed materials andworkmanship to complete the job as per drawings specifications and theengineer’s instructions. EU brand name

No. 51

7.7 Supply, install and operate of a lighting wall mounted emergency lighting fixture type Gaash model 1838 Naama ,or equivelent,160Lm ,with 3W, LED lamp with 1HRS NI-CD batteries including wires 3X1.5mm2 with lamps, conduits, fittings, accessories and any other needed materials and workmanship to complete the job as per drawings specifications and the engineer’s instructions.

No. 14

7.8 Supply, install and operate a lighting emergency signs (EXIT) surface mounted type Gaash code no. 580101or equivalent according to the drawings , specifications and the engineer’s instructions. No. 5

7.9 Supply, install and operate a preparation point ( light or data or camera ), complete with all needed pipe , wires or data cables according to the engineer’s instructions.

No. 107.10 Supply and Install flush single circuit, one way 220V,10A, on/off switch

type bticino matix or gewiss chorus or equivalent complete with connection box ,supporter, conduits, wires and all needed materials and workmanship to complete the job as per drawings, specifications and the engineer’s instructions.

No. 15

7.11 Ditto but double pole one way. No. 107.12 Ditto but triple pole one way. No. 107.13 Ditto but one pole two ways. No. 107.14 Ditto but double pole two ways. No. 107.15 Supply and Install flush single circuit, one way 220V, 10A, on/off switch

(bush button) type bticino matix or gewiss chorus or equivalent with indication lamp complete with connection box ,supporter, conduits, wires and all needed materials and workmanship to complete the job as per drawings, specifications and the engineer’s instructions.

No. 4

7.16 Supply and Install single phase flush 220V,16A socket outlet type bticino matix or gewiss chorus or equivalent with needed wires 3*2.5mm2 with conduits, fittings, support ,accessories and any other needed materials and workmanship to complete the job as per drawings specifications and the engineer’s instructions.

No. 42

7.17 Supply and Install flush telephone socket outlet, 6 wires pin type bticino matix or gewiss chorus or equivalent with needed cable as per drawings, specifications and any other needed materials and workmanship to complete the job as per drawings specifications and the engineer’s instructions.

No. 5



$ Amount $Item


7.18 Supply and Install computer data, flush socket outlet, type bticino matix or gewiss chorus or equivalent, with wires UTP CUT6 andany other needed materials and workmanship to complete the job as per drawings specifications and the engineer’s instructions. No. 19

7.19 Supply and install batik flush mounting floor boxes industry Legrand 4-gang frames (8mosaic modules) \ 89298 with stainless cover \ 89291 inclusive all elements of operating wires and tubes, wiring diagrams and workmanship to complete the job as per drawings specs and the engineer’s instructions.NOTE: for masonry (concrete floors).

No. 3

7.20 Supply and install Fire Alarm Panel brand Bentel, telefire (or equivalent ,fire alarm control panel, 2 loops, including power supply , all needed j-boxes , wires, batteries , remote control keypad also combines automaticcommunicator with all the necessary materials to run the system to thefullest such as programming and operating …. etc. according to thedrawings, technical specifications and the engineer’s instructions.

No. 1

7.21 Supply and install addressable smoke detector including wiring andconduits and any other needed materials and workmanship to completethe job as per drawings specifications and the engineer’s instructions. No. 15

7.22 Supply and install addressable heat detector including wiring andconduits and any other needed materials and workmanship to completethe job.

No. 37.23 Supply and install flusher LED on + fire bell (compact unit) with conduits,

fittings, accessories and any other needed materials and workmanship tocomplete the job. No. 4

7.24 Supply and install button operation BREAK GLASS , with plastic cover with all the necessary wires, conduits, accessories, and any other needed materials and workmanship to complete the job. No. 4

7.25 Supply and install an assembly box type GEWISS No. PT48. Or equivalent No. 87.26 Supply and install exit fans 12" Italy made or equivalent and all needed

accessories, and any other needed materials and workmanship tocomplete the job as per drawings specs and engineer’s instructions. No. 2

Sound system (Behringer or Inter-M or equivalent)7.27 Supply and install the following including all the needed materials and

workmanship to complete the job as per drawings specs and engineer’sinstructions:

7.28 supply and install Main sound system rack with needed suitabledimensions and size to install all component mentioned in sound systemitems (size must be 30% increasing for future extinction No. 1

7.29 1600-Watt 16-Channel Powered Mixer with Multi-FX Processor and FBQFeedback Detection System , type is (Behringer EUROPOWER PMP4000 No. 1



$ Amount $Item


7.30 Desktop MicrophoneMIC Type Condenser No. 6

7.31 wireless Microphone No. 27.32 Ceiling Speaker , 8''

Rated Power 10W cotina or eq

No. 15Distribution Switch Boards

7.33 Supply, install & commission to complete the job for the followings, the type is MOELLER or approved equivalent:

7.34 Supply and install main power distribution board MDB, complete with additional 30% free space for future extension according to the drawings, technical specifications, installation instructions and the supervising engineer’s instructions. The frame of MDB is galvanized steel sheet with 2mm thickness and antistatic primer paint and 2 coats of final polyester paint. The size & dimensions of MDB must be enough & suitable for assemble and maintain easily all panel components listed below.Contractor must submit shop drawing before manufacturing and obtain the supervising engineer’s approval to proceed the manufacturing. Also the shop drawing must be more detailed with all MDB components (types, ratings, specifications …etc.) also the shop drawing must be approved by (GEDCO).The price include all neede wires , bus bars , accessories , ....

N.O 1

7.35 supply & install 0-500A digital Ammeter with all needed N.O 37.36 supply & install 0-500 V digital voltmeter with all needed , LTL , selector

sw unit 17.37 3-Color indication lamps with ltl fuse set 37.38 400/5A Current Transformers N.O 157.39 Three phase KWH meter, 5A, 380 V N.O 17.40 Single phase KWH meter, 5A, 380 V N.O 37.41 Three phase KVARH meter 5A ,380V N.O 17.42 Three phase main fused switch (LTL)3*630/400A with 3*400A HRC fuse ,

400V ,120 KA . Moeller type or equivalent. N.O 17.43 M.C.C.B 3*400A , with external hand, NZM-N3-400A or equivalent . N.O 27.44 Four poles Motorized Automatic transfer switch ( ATS)2* (4*630A NZM-

N3-4*630A) or equivalent complete with motor control and with all needed equipment and control as per drawings and according to supervisor engineer instructions .

unit 1

7.45 MC.C.B 3*100A - NZM-B1-3*100A or equivalent N.O 17.46 MC.C.B 3*40A NZM-B1-3*63,40A or equivalent N.O 47.47 MC.C.B 4*250A NZM-N2-4*250A or equivalent . N.O 17.48 *Manual 12 Poles Change over 400V,630A , Type Is SECOMIC or

equivalent N.O 17.49 MCCB 4X16A / EATON TYPE N.O 17.50 Supply & Install automatic Power Factor Correction Unit complete with

all components and all needed protection devices as per drawing with , LTL 250A , CONTROL PANEL , 80 KVAR capacity 6 stage according to GEDCO Specifications & Regulations with all needed according to supervisor engineer instructions.

unit 1



$ Amount $Item


7.51 Supply & install the distribution switch board No. P/DA including the following listed components with all needed wirings,B.B. , fittings and accessories according to specifications & supervisor instructions as follow: - The frame must be made of 2mm thickness galvanized steel sheets & painted with antistatic primer paint and 2 coats of final polyester paint. The size is 80*60*20cm

N.O 1

7.52 MCB 4 poles 4*63A, 400V. N.O 17.53 Four poles E.LC.B. (R.C.C.B.) 4X40A/0.03A,400V N.O 17.54 Four poles M.C.B. 4X25A, 400V N.O 27.55 Four poles E.LC.B. (R.C.C.B.) 4X25A ABB/F204A-40/0.03A,400V or

equivalent. N.O 27.56 Four poles M.C.B. 4X40A, 400V ABB/S804S-C25 or equivalent. N.O 17.57 Two poles M.C.B 2x16A-220V type ABB/SN20IL B16 or equivalent. N.O 67.58 Two poles M.C.B. 2x10 A, 220V type ABB/SN20IL B10. N.O 267.59 Two poles M.C.B. 2x6A, 220V type ABB/SN20IL B10. N.O 27.6 Supply& install the distribution switch board No. P/DB according to the

drawing and specifications with all needed wirings, B.B., fittings and accessories according to supervisor instructions as follow:- The frame specifications are the same as mentioned for P/DA Switchboard.- The P/DB board Size is 80*60cm , includes supplying and installing the following listed components with all needed wirings according to specifications & supervisor engineer’s instructions.

N.O 1

7.61 MCB 4X63A , N.O 17.62 Four poles E.LC. B ( R.C.C.B.) 4X40A ABB/F204A-40/0.03A, 380V or

equivalent. N.O 17.63 Four poles E.LC. B ( R.C.C.B.) 4X25A ABB/F204A-40/0.03A, 380V or

equivalent. N.O 17.64 Four poles E.LC. B (R.C.C.B.) 4X16A ABB/F204A-40/0.03A, 380V or

equivalent. N.O 17.65 Four poles M.C. B 4X16A, 380V ABB/S804S-C25 or equivalent. N.O 17.66 Two poles M.C.B 2x16A, 220V type ABB/SN20IL B16 or equivalent. N.O 87.67 Two poles M.C.B 2x10A, 220Vtype ABB/SN20IL B10 or equivalent. N.O 77.68 Four poles M.C. B 4X40A, 380V type ABB or equivalent. N.O 17.69 Four poles M.C. B 4X25A, 380V type ABB or equivalent. N.O 17.7 Supply & Install the 40*60 cm distribution switch board No. P/DC

according to drawing and specifications with all needed wirings, fittings and accessories according to supervisor instructions as follow:- The frame specifications are the same as mentioned for P/DA Switchboard.- The P/DC board prize includes supplying and installing the following listed components with all needed wirings according to specifications & supervisor engineer instructions.

N.O 1

7.71 Four poles M.C. B 4X40 ABB TYPE S804S-C32 N.O 17.72 Four poles E.LC. B (R.C.C.B.) 4X25A, 380V type ABB/F204A-40/0.03 or

equivalent. N.O 17.73 Four poles E.LC. B (R.C.C.B.) 4X16A, 380V type ABB/F204A-40/0.03 or

equivalent. N.O 17.74 Four poles M.C. B 4X25A, 380Vtype ABB/S804S-C25 or equivalent. N.O 17.75 Four poles M.C. B 4X16A, 380Vtype ABB/S804S-C25 or equivalent. N.O 1



$ Amount $Item


7.76 Two poles M. C. B2X16A, 380V type ABB/SN20IL B16 or equivalent. N.O 67.77 Two poles M. C. B2X10 A, 380V type ABB/SN20IL B10 or equivalent. N.O 57.78 Step Relay 16A. N.O 17.79 Supply & Install the distribution switch board No. AC/Roof according to

drawing and specifications with all needed wirings, fittings and accessories according to supervisor instructions as follow:- size include all materials + 40% spare- The AC/Roof board prize includes supplying and installing the following listed components with all needed wirings according to specifications & supervisor engineer instructions

N.O 1

7.8 M.C.C.B 3X250A,380V type NZM-N1-3*250A N.O 17.81 M.C.C.B.3X160A,380V type NZM-N1-3*160A N.O 27.82 Supply& Install the 40*60CM distribution switch board No. P/Basement

according to drawing and specifications with all needed wirings, fittings and accessories according to supervisor instructions as follow:- The frame specifications are the same as mentioned for P/DA Switchboard.- The P/Basement board prize includes supplying and installing the following listed components with all needed wirings according to specifications & supervisor engineer instructions.

N.O 1

7.83 Four poles E.LC.B. (R.C.C.B.) 4X16A, 380V ABB/F204A-40/0.03A or N.O 17.84 Two poles M. C.B 2x16A type ABB/SN20IL B16 or equivalent. N.O 37.85 Two poles M. C.B 2x6A type ABB/SN20IL B16 or equivalent. N.O 37.86 Four poles M.C.B. 4X16A, 400V ABB/S804S-C25 or equivalent. N.O 17.87 Supplying and install Dimming and control Lighting Panel (for hall),table

mounting Complete according to drawing and supervisor engineer’s instructions The price includes the ,wiring, fittings, accessories and any other needed materials and workmanship to complete the job ( also all components must be Gawiss type or equivalent ) the board include the listed litem *The contractor must submit shop drawing before start work

unit 1

7.88 Flash two pole on/off Switch type gawiss or equivalent N.O 97.89 Flash Dimmer Switch 10A/220V type gases or equivalent N.O 15

Cables & ManholesSupply and install the following cable according to the drawings, specifications and the engineer's instructions:

7.90 Supply and install underground double circuit cables XLBE (N 2XY) AL. 2(4x150mm2) inside PVC SN8 pipes 6 inch one pipe for each single cable from proposed transformer to new MDB as per drawings, specifications, GEDCO regulations and the engineer’s instructions, the price of cable includes pipes warning tapes, clean sand, civil works and any other needed materials and workmanship to complete the job as per drawings specifications and the engineer’s instructions.

RM 100

7.91 Supply and Install 3x25+16mm2+E16mm2 copper XLPE (N2XY) cable inside 4"pvc -SN8 pipes, with needed hot galvanized steel cable guard andCable tray . from MDB to (P/DA & P/DB ) panel. With all civil works andany other needed materials and workmanship to complete the job as perdrawings specifications and the engineer’s instructions.

RM 60



$ Amount $Item


7.92 Supply and Install 5*16mm2 copper XLPE (N2XY) cable in side 4"pvc -SN8 pipes, with needed hot galvanized steel cable guard and Cable tray .from MDB to (P/DA & P/DB ) panel. With all civil works and any otherneeded materials and workmanship to complete the job as per drawingsspecifications and the engineer’s instructions.

RM 100

7.93 Supply and Install 5*10mm2 copper XLPE (N2XY) cable in side 4"pvc -SN8 pipes, with needed hot galvanized steel cable guard and Cable tray .from MDB to (P/DA & P/DB ) panel. With all civil works and any otherneeded materials and workmanship to complete the job as per drawingsspecifications and the engineer’s instructions.

RM 100

7.94 Supply and Install (3x120+70+ E 70) copper XLPE (N2XY) cable in side 4"pvc -SN8 pipes, with needed hot galvanized steel cable guard and Cable tray . from MDB to AC/Roof . With all civil works and any other needed materials and workmanship to complete the job as per drawings specifications and the engineer’s instructions.

RM 40

7.95 Supply and Install (3x50+25+E25mm2) copper XLPE (N2XY) cable inside 4"pvc -SN8 pipes, with needed hot galvanized steel cable guard andCable tray . from new MDB to old existing MDB power supply connection. With all needed civil works and any other needed materials andworkmanship to complete the job as per drawings specifications and theengineer’s instructions , Dismantle the old cable and connect the new one

RM 40

7.96 Supplying and executing 80cm interior diameter manhole for electricalpower and telephone cables, with 8-ton cover, 15cm base course and allthe needed materials and workmanship to complete the job as requestedby the engineer.

No. 11

7.97 Supplying and executing 60cm interior diameter manhole for electricalpower and telephone cables, with 8-ton cover, 15cm base course and allthe needed materials and workmanship to complete the job as requestedby the engineer.

No. 4

Stage Lighting System requirementSupply and install the following items according to the drawings,specifications and the engineer's instructions:



$ Amount $Item


7.9824-way patch panel to accommodate (24) sockets to be connected to stage spot lighting system and dimmer panel of stage lighting. No. 1

7.99

Control Dimmer board system consists of 24-way (dimmers) , each rated at 20A for stage lighting and controls variable load from 80W to 2000W of tungsten lamps on 220/240V, complete with programmable, DMX Console ,DMX 24CH Dimmer Pack in Fly Case with all accessories needed or equivalent as per drawing and the engineer's instructions.

No. 1

7.100Supply and install pvc conduits, cables, needed for future installation of Digital Conference Systemas shown in the drawings, specifications and engineer's instructions. LS 1

7.101

Supplying and installing foundation earthing systems consisting of welding 3X35mm galvanized steel sheets and connection to the distribution boards, R.≤5 Ohm, as per drawings, specifications and engineer's instructions.Digital Conference SystemSupply, install, connect and commissioning complete in place and in an operatable manner Digital Conference System similar to BOSCH or equivalent, including equipment, installation, connection and wiring as specified in the technical specifications and shown on drawings and the engineer’s instructions.

LS 1




$ Amount $Item


Bill No. (8) HVAC Works

8.1

Supply, install, test and commission a roof top unit of a BRAND name (US, European, Japan only) unit to be of a cooling load 116kw, with a heat pump, with a maximum power consumption of 48kw, unit to be with scroll compressors with inverter for soft starting and economic control, the total air flow to be 11160cfm with a high static pressure variable speed fan, unit to be double skin with thermal insulation not less than 5cm fiber glass, refrigerant to be of environment friendly R407, unit to be with all controls for protection, air control, temp. Control and work for

Unit 2

8.2

Supply, install, test and commission a ducted concealed split unit with inverter to be of 60,000 btu/hr, complete with filters, high static pressure fan, flexible connection, electrical control panel, copper cooling coil, remote control, room thermostat, and an outdoor unit with the galvanized steel base, heat pump reverse cycle for heating, scroll compressor and all related works as per specifications, drawings and the engineer's instructions.

Unit 1

8.3Ditto, but decorative type, of a cooling capacity of 12000btu/h, with inverter type as per specifications, drawings and the engineer's instructions.

Unit 4

8.4

Supply, install and commission an aluminum adjustable air outlets for distributing the air, a jet type is required to supply the air to the bottom, square or round type is acceptable, the air volume to be of 530 cfm, color to be specified by supervisor. All to be executed as per specifications, drawings and the engineer's instructions.

No. 63

8.5 Ditto, but for return air, grill type. No. 128.6 Ditto, but of size 60x60cm. No. 28.7 Ditto, but air louver 200x80cm. No. 2

8.8

Supply, fabricate, install and commission hot dip a galvanized steel metal sheet duct of thickness 0.7-1.0 mm for supply air and return air, according to the drawings and duct standards (SMACNA), duct to be with thermal insulation of fiber glass 24kg/m3, and 1-inch thickness (Indoor the building), with all dampers, splitters, fasteners, screws and all related works. All to be executed as per specifications, drawings and the engineer's instructions.

M2 450

8.9

Ditto, but for external the building, to be with 5cm thickness insulation of 48kg/m3 fiber glass, duct to be with an aluminum cladding of 0.5mm thickness.All to be executed as per specifications, drawings and the engineer's instructions.

M2 50

8.10Supply & cast ready mix concrete 200 kg/cm2 under the HVAC roof top units 20cm thick with steel mesh 10 mm diameter every 20cm and 5.0cm polystyrene as shown on the drawings, specifications and the engineer's instructions

M2 50

Total of Bill No. (8)Bill No. (9) Miscellaneous Works

9.1 Supply and fix fire extinguisher, 6kg capacity filled with CO2, fixed at 2m No. 29.2 Ditto but filled with dry powder 3.0kg. No. 2




$ Amount $Item


SUBTOTAL OF (A) M.P.H Building 1 Bill No. (1) Excavation & Earth Works

2 Bill No. (2) Concrete & Block Works

3 Bill No. (3) Finishing Works

4 Bill No. (4) Carpentry & Joinery Works

5 Bill No. (5) Aluminum & metal Works

6 Bill No. (6) Plumbing & Sanitary Works

7 Bill No. (7) Electrical Works

8 Bill No. (8) HVAC Works

9 Bill No. (9) Miscellaneous Works

- SUB TOTAL


B LABS Building Unit Rate Total

$ Amount $(B) Labs Building

Construction Works : Labs BuildingBill No. (1) Excavation & Earth Works

1.1 Excavation for foundations from natural ground level up to the required designed level. The works including:- The compaction of the soil surfaces to get (98% MDD).- The excavated material should be removed out from the site to the approved places.- All to be executed as per specifications, drawings and the engineer’s instructions.

M3 220

1.2 Supply, fill by using approved material (clean sand) around the foundations & inside the building up to the required levels, which shall be spread in layers not exceeding 25cm each one & compacted (98%) to reach up the required levels (under floor slab), according to the specifications & the engineer's instructions.

M3 180


ItemDescription

Unit Qty.



$ Amount $Item


Bill No. (2) Concrete & Block Works A- Concrete WorksRates of Concrete Works shall include: - - All form works and shuttering in any form, shape and size. Making chamfered and curved edges, allowing for and making grooves and sleeves and the like; removal of forms and cleaning of all exposed tie wires and rods; making good the harmed surfaces and edges and all surface finishing.- Supplying, Casting, vibrating and curing as per specifications. - Approved additives and admixtures.- Incurred costs on Concrete Mix Designs, Sample taking, testing and providing test results certificates, storing and saving of samples.- Supplying reinforcement of any grade, size and length as detailed in the drawings, storing on site including cutting, bending and fixing in position and providing all tying wires, spacers, shop drawings, testing and bar bending schedules - Painting of exposed surfaces of underground reinforced concrete elements with primer and two coats of hot bituminous paint (75/25), the strokes of each layer to be opposite to each other.- Underground concrete elements prices are including expansion joints, flexcell sheets 18mm thick & mastic.- Steel bars used for alignment and fixing of reinforcement works, and extra steel added to assure proper detailing and safety.-Supply & spread polythene sheets gauge 500 under the foundations & ground slabs.- Measurement of Concrete elements shall be the net dimensions as detailed in the drawings. All recesses openings and voids shall be deducted. - Measurement shall be only for the seen surfaces of elements. Overlapping and measuring items twice under separate headings shall not be allowed.- Columns are to be measured from the top level of the slab to the bottom level of the beam or dropped beam.- The concrete surface must be finished with mechanical steel trowel machine.All works must be done as per drawings, specifications & the engineer's instructions.

2.1 Supply & cast plain concrete (200kg/cm2) under the foundations. M3 52.2 Supply & cast ready mix concrete (300kg/cm2) for reinforced concrete

foundations M3 382.3 Supply & cast ready mix concrete B300 for columns necks as shown on

the drawings, specifications and the engineer's instructions. M3 2



$ Amount $Item


2.4 Supply & cast ready mix concrete B300 for tie ground beams. M3 152.5 Supply & cast ready mix concrete B250 for ground slab 10cm thick with

steel mesh T8/20cm each way. M2 2052.6 Supply & cast ready mix concrete B300 for columns as shown on the

drawings, specifications and the engineer's instructions. M3 202.7 Ditto but B200 for stop columns at roof. M3 22.8 Supply & cast ready mix concrete B300 for suspended hollow block slabs

30cm thick, including the hollow cement blocks, reinforced concrete hidden, inverted & drop beams & all the required materials. M2 700

2.9 Supply & cast ready mix concrete B250 for doors & windows lintels, sills& canopies including all the required materials. M3 23

2.10 Ditto, but for parapet walls coping & external concrete elements. M3 32.11 Supply & cast ready mix concrete B200 under the elevated water tanks

20cm thick with steel mesh 10 mm diameter every 20cm and 5.0cm polystyrene as shown on the drawings, specifications and the engineer's instructions.

M2 6

B- Block Works: - The items include supplying hollow cement block from good and 2.12 Supply & build hollow block walling 20cm thick including the supplying of all materials (block size 20 x 20 x 40cm). M2 500

2.13 Supply & build hollow block walling 15cm thick including the supplying of all materials (block size 15 x 20 x 40cm). M2 60

2.14 Supply & build hollow block walling 10cm thick including the supplying of all materials (block size 10 x 20 x 40cm). M2 55Total of Bill No. (2)



$ Amount $Item


Bill No. (3) Finishing Works 3.1 Supply & execute internal plastering 13mm thick to walls, soffits &

columns including galvanized metal lath angles for columns, edges & chicken wire at the intersection of concrete & block works, pipes & cement rendering as per the engineer's instructions. M2 1100

3.2 Ditto but for cielings according as per specifications and engineer instructions. M2 650

3.3 Ditto, but for external plastering 15mm thick to walls and soffits theprice including additional layer of 5mm thick lime free mortar (mix 1: 3)as per specs, drawings and the engineer’s instructions. M2 100

3.4 Supply and install west bank smooth stone 5.0 cm thick with backingfilling 5.0cm (Grade B-200) with steel mesh 6mm dia @ 20cmm as perthe engineer's instructions. M2 150

3.5 Ditto but Molatash 5.0 cm thick with backing filling 5.0cm. M2 5003.6 Supply and install terrazzo floor tiles (grade A) size 25x25x2.5cm with

Basalt stone laid on 2cm mortar bed and 5 cm thick sand bed and terrazzo skirting 25x7x1cm including all materials and testing as per the engineer's instructions.

M2 550

3.7 Supply and cast terrazzo edge beam 20cm x10cm of the same kind andcolor of the floor tiles including smoothing the surfaces and edges (forcorridors) as per the engineer's instructions. M2 10

3.8 Supply and install local marble (grade A) size 34cm wide x 3cm thick laidon 2 cm thick mortar bed as per specifications, drawings, and theengineer's instructions.The item shall include suppling and installing 2cm local marble betweenthe aluminum window and the mentioned marble, this marble has thesame aluminum window depth.

RM 50

3.9 Ditto but size 36 cm wide x 3cm thick for roof parapet. RM 703.10 Ditto but size 30 cm wide x 3cm thick for corridors parapet. RM 603.11 Ditto but threshold size 23 cm wide x 3cm thick for doors. RM 203.12 Supply and erect marble 2 cm thick for buffet and canteen 400 cm

lengths, 60 cm wide and 87 cm high including vertical dividers, internal horizontal shelves, back of cupboards, floors and granite (Tiger eye) for the top surface with round edges, skirting 10 cm high and making the needed opening for basins as shown in drawings. The work shall also include the cupboard leaves, drawers which will be made of 17mm plywood covered with colored Formica 0.5mm sheets from both sides

Unit 1

3.13 Supply and install high quality Granite 593x90x2cm thick (Tiger Eye) for top cover of experiment chemistry lab preparing bench. The price shall include the local marble grade A, supports, shelves, all accessories, granite skirting 10 cm high, all accessories, fittings, making holes for basin and water and gas supply, water mixer, cold and hot water networks, drainage network, and gas supply distribution network in accordance with the specs, drawings and the engineer's instructions.

Unit 2



$ Amount $Item


3.14 Supply and install high quality Granite 257x75x2cm thick (Tiger Eye) for top cover of demonstration chemistry lab bench. The price shall include the local marble grade A, supports, shelves, granite skirting 10 cm high, all accessories, fittings, making holes for basin and water and gas supply, water mixer, cold and hot water networks, drainage network, and gas supply distribution network in accordance with the specifications, drawings and the engineer's instructions.

Unit 1

3.15 Ditto but for physical lab demonstration bench without gas supply. Unit 13.16 Supply and install colored none slipping ceramic (grade A) 8mm thick for

floor. M2 803.17 Supply and install colored glazed wall tiles (grade A) 6mm thick laid on

2cm mortar (1:3). M2 2603.18 Supply and paint, external soffits, sloping soffits, facade and external

columns with one coat of bondrol primer and at least two coat ofExternal quality of colored emulsion paint (Supercryle) or equalapproved as per specifications, drawings and the engineer's instructions. M2 100

3.19 Supply and paint the internal walls up to a high of 2.2m above finishingfloor level two coats of putty, one undercoat primer and two coats ofcolored oil paint as per specs, drawings & the engineer's instructions. M2 550

3.20 Supply and paint one primer and minimum two coats of emulsion paint(Poliside) for internal walls, ceiling and drop beams as per specifications,drawings & the engineer's instructions. M2 1000

3.21 Supply and cast foam concrete with fine aggregates for roof screening of ranging thickness from 4 to 15 cm and sand angle fillets size 5cmx5cm as per specifications, drawings and the engineer's instructions . M2 227

3.22 Supply and lay one layer of plasticized bitumen roofing membrane with chipping 4 mm thick, including priming concrete surface prior to laying, dressing into rain water outlets to form water proofing seal and cover the angle fillets. The rate include verticals parts skirting as per specification and drawings.Note: Measurement will be for the horizontal projection

M2 227

3.23 Supply and execute expansion joint at the roof as detailed in drawingsincluding flexcell sheets 18mm thick, (THIOMOFLEX 600) mastic 20mmthick and all reinforced concrete inverted beams & other elements asper drawings, specifications & the engineer's instructions.

RM 10

3.24 Supply and execute expansion joint on the floors as detailed in drawingsincluding flexcell sheets 18mm thick, 20x30mm (NETO 280) mastic, 2Nos. of galvanized steel angle size 75x75x5mm & 1.0m wide strip of self-adhesive membrane 4.0kg/m2 as per drawings, specifications and theengineer’s instructions.

RM 7

3.25 Supply and execute expansion joint at sides of walls and columns asdetailed in drawings including flexcell sheets 18mm thick, (THIOMOFLEX600) mastic 20mm thick & cover the joints with aluminum strip size75x6mm or aluminum angle 57x57x6mm fixed to aluminum strip37x6mm screwed to the walls or the soffits from one side, as perdrawings, specifications and the engineer’s instructions.

RM 15




$ Amount $Item


Bill No. (4) Carpentry & Joinery Works The items include supplying carpentry works from good wood includeframe cover mold, architrave, galvanized steel frame, concrete filling 4.1 Supply, fix and paint wooden single internal flush door type D2 size80x220x4.5cm according to the drawing, specifications and undersupervision.

No. 64.2 Ditto, but for type D3, overall size 70x 220x4.5cm thick. No. 124.3 Supply and fix 120x20mm soft wood coat hook rail smoothed, plugged

and screwed to wall at 30cm center to center including priming andsanding sealer and two coats of varnish painting with Galvanized steelcoat hook screwed to rail at 20cm center to center as per the engineer’sinstructions.

RM 8

4.4 Supply and fix soft wood rubbing rails size 200mm x 20mm with roundedges, smooth surface, apply two coats of sanding sealer, sand lightlyand apply two coats of varnish, drill and fix to concrete or block wallsusing expansion steel bolts.

RM 45

4.5 Supply and install wall mounted magnetic white marker board , 25 mmprofile KALBOARD MW 3612/CR size 120x360 cm) with silver anodizedelegant aluminum frame (19x25mm thick) and four strong roundedplastic (upvc) corners fixed internally with screws to the wall, and alsowith silver anodized aluminum try fixed by sliding through the profilewhich used for markers and duster and has UPVC edges for safety. Thewriting surface coated of Porcelain fixed by using automatic gluingmachines to 11mm thick MDF wood covered automatically by aluminumfoils. Price to include all related works as per drawings, specification andEngineer’s Instructions. the price shall include removing the existingboards and handled to the owner.

No. 4




$ Amount $Item


Bill No. (5) Aluminum & Metal Works . The rates of the following items shall be Completed in accordance withdrawings, specifications, details and as directed by the engineer.. Door frames shall fit walls & sizes of door openings, taking intoconsideration the thickness of plastering on both sides of the frames.. Hardware for doors shall be Waley type with approved handles. . The aluminum windows are colored powder coated aluminumJordanian type 7000 / 4500 or approved equivalent with sliding leaves,frame, clear glass 4mm thick, fly screen ironmongery, and hardware andaluminum accessories.. The aluminum will be tested in approved testing laboratory.. The contractor has to submit shop drawings to the engineer beforefabrication and installation.

5.1 Supply & install Mul-T-Lock door type 417 with overall size 125cm widthx 220cm height (D1) with powder coated paint. Door lock type 235 &Mul-T-Lock serrated cylinder. All to be carried out according to thespecifications, drawings & the engineer's instructions.

No. 4

5.2 Ditto, but with size 105 cm widths x 220cm height (D4). No. 15.3 Supply and fix powder coated colored aluminum window type "W1" size

220 cm width x 120 cm height, (model 7000) sliding leaves, fly screenleaves, frame, clear glass 4mm thick, ironmongery, and hardware andaluminum accessories. All as per specifications, drawings and theengineer’s instructions.

No. 12

5.4 Ditto, but type "W2" size 240 cm width x 70cm height. No. 65.5 Supply and fix powder coated colored aluminum type model 4500 for

window type "W3" size 100cm width x 70cm height with two hinged atthe mid, unclear glass 4mm thick, ironmongery and hardware as perspecifications and drawings.

No. 6

5.6 Supply & fix galvanized steel protection for external Windows size220x120cm type "W1", the prices including all the galvanized steel, thefixation accessories, painting with one primer coat & two coats of oilpaint, all according to the drawings, specification and engineer’sinstructions.

m2 12

5.7 Supply and fix galvanized steel protection for internal windows overallsize 240x70 cm type (W2), the prices including all the steel, the fixationaccessories, painting with one primer coat & two coats of oil paint, allaccording to the drawings, specification and engineer’s instructions.

No. 6

5.8 Ditto, but for windows type "W3" size 100cm width x 70cm. No. 65.9 Supply & fix galvanized steel protection for external Windows size

220x67.52cm type (W1),at first & second floors, the prices including allthe galvanized steel, the fixation accessories, painting with one primercoat & two coats of oil paint, all according to the drawings, specificationand engineer’s instructions.

No. 8

5.10 Supply & fix mild steel balustrade 60cm high for corridor at ground floorcomprising of mild steel hollow section tubes 40 x 20 x 2 mm verticalsspacing 15 cm center to center, & welded to mild steel hollow sectioncoping 60x40x3 mm top & hollow section tube 60x40x3 mm bottom, theprice includes mild steel end angles & plates, painting with one primer,one under coats & minimum two coats of oil paint, (the color to beapproved by the Engineer, all as per specifications, drawings & theengineer's instructions.

RM 30




$ Amount $Item


Bill No. (6) Plumbing & Sanitary Works . The rates of the following items shall be completed in accordance withthe drawings; specs, details and as directed by the engineer.. The contractor must submit the shop drawings to the engineer'sapproval before starting the work.. The contractor must submit the as built drawings to the engineer'sapproval after completing the work.. All materials used for plumbing works shall be of high quality materialsbased on the British standards and must be approved by the engineer,the price shall include fittings, connections, accessories, testing and allthe needed materials to complete the job according to thespecifications, conditions of contract, drawings & engineer’s approval.. The used cold water pipes are galvanized steel pipes (Akko) / HDPEpipe.. The used hot water pipes are galvanized steel pipes (Akko) with heatinsulation (Armoflex) / HDPE pipe.. The drainage pipes (UPVC, Fittings ... etc.) from Holiout must beaccording to the drawings & engineer's instructions.. All fittings, accessories, valves, brackets, connections and all theneeded materials to complete the job are included.. Chlorination, flushing & testing must be carried out according to thespecifications & the engineer’s instructions.

6.1 Supply and fix white glazed porcelain hand wash basin size 50cm x 41cm(Vitra type 6602+6173) or approved equivalent, complete with all watersupply pipes ½", waste fitting, trap, plug and chain, chromium platedwater mixer 1/2" dia. Jack type) (From Artema-Armix or Hamat orapproved equivalent) and mirror 60x60cm, Supply & fix white glazedsoap tray tiled into block walls, steel brackets supports and the drainageline to floor trap 2”, all needed accessories & the pipe concreteencasement as per specifications, drawings and the engineer'sinstructions.

No. 12

6.2 Supply & fix porcelain kitchen sink with two bowls built in the granitework top for buffet including water supply pipes ½”, waste fitting, trap,plug & ½" swan neck chromium plated water mixer 1/2" dia. Jack type)(From Artema-Armix or Hamat or approved equivalent) & the drainageline to floor trap & all needed accessories. All as per specs, drawings andthe engineer instructions.

No. 1

6.3 Supply & fix white glazed porcelain squatting W.C. suite (HARSAEUROPEAN - TYPE or approved equivalent) complete with porcelainflushing cistern, pip hose, 1/2" dia. UPVC 100 cm long flushing pip hosefor toilets, seat & plastic cover, white glazed toilet paper holder tiledinto block walls (size 15cmx15cm), 4" dia. P.V.C. drainage pipe to thenearest main drainage line, all needed accessories & the pipe concreteencasement (as shown in the drawings (Vitra-Normus or approvedequivalent).

No. 12



$ Amount $Item


6.4 Supply & fix 1.5" dia galvanized pipe for main water supply connected from the existing water pump line to the building network as shown on the drawings & as per the engineer’s instructions, the price shall include all the necessary fittings, valves, excavations, backfilling, concrete encasement & all needed materials to complete the job.

RM 75

6.5 Supply & fix 1" dia. galvanized pipe inside pvc 2” sleeve pipe for dropwater pipe connected from the school roof tanks to the water line asshown on the drawings and according to the engineer’s instructions, theprice shall include all the necessary fittings, valves, excavations,backfilling, concrete encasement & all needed materials to complete thejob.

RM 15

6.6 Ditto but 1.5" dia for water risers and distribution lines embedded inblock works or lay under floor tiles or on roofs. RM 15

6.7 Ditto but HDPE dia. 3/4" dia for cold water. RM 2406.8 Supply and install UPVC pipes 6” diameter for drainage, with sockets

joint 4.7 mm wall thickness. The work shall include the excavation,backfilling, jointing, and the pipe concrete encasement……. etc. tocomplete the job as per specifications, drawings and the engineer'sinstructions. Also connect the sewer networks with the existing manhole as perdrawings; the work shall include the municipal fees and all the neededmaterial to complete the job as per the engineer's instructions.

RM 15

6.9 Supply and install UPVC pipes 4” diameter for drainage, with sockets joint 3.2 mm wall thickness. The work shall include the excavation, backfilling, jointing, and the pipe concrete encasement……. etc. to complete the job as per specifications, drawings and the engineer's instructions.

RM 95

6.10 Supply and install UPVC pipes 3” diameter for rain water drainage pipe,with sockets, pipe joints, caps, supports and all needed materials tocomplete the job as per specifications, drawings and the engineer'sinstructions.

RM 35

6.11 Ditto but 4” diameter for vent-pipe. RM 10



$ Amount $Item


6.12 Supply and fix floor trap 4" diameter, complete with heavy duty brass grating & UPVC pipe to the nearest inlet with the pipe concrete encasement as per specifications, drawings and the engineer's instructions.

No. 28

6.13 Supply and install concrete manhole of internal diameter 60cm, and (50-90) cm depth according to the required level, 12cm thick plain concrete for walls and base, slab, with cast iron cover with 8 ton bearing capacity according to I.S, specifications and drawings.

No. 4

6.14 Supply & install 1.5 m3 local made black polyethylene water tank withlockable cover, fittings, vent pipes, overflow, drain, connections, galv.Steel tank stand, valves, float switches & the required accessoriesaccording to the drawings, specs & engineer's approval.the item shall include supply & install galvanized steel stand for watertank with all the required accessories rest on 30x30x3.0cm thick marblefootings according to the drawings, specifications & engineer's approval.

No. 3

6.15 Supply, install and fix gas system with control valves (S&B or equivalent), gauge pressure (16bar, R & R or equivalent), wooden gas junction box size 40x40x20cm including one leaf cover and 3x36kg gas cylinders and all gas pipes, burners, connection and all accessories needed to complete the gas network and connect the gas to the benches to gas valves (SG-1 Sagir or equivalent) for Labs units, all according to the drawings, specifications & the engineer's instructions.

L.S 1

6.16 Supply and install an approved water distribution galvanized steel 2mm thick cabinets with galvanized steel doors with switch locks and hammer paint for the distribution water network with any number of cold water & hot water outlets with polythene pipe HDPE 16 mm distribution pipes and the connection from the main supply drop pipe G.S.P. to the distribution cabinets, air valves, gate vales, unions, supports and all accessories needed to complete the job, all according to the drawings, specifications & the engineer's instructions.

No. 3




$ Amount $Item


Bill No. (7) Electrical Works The prices of all electrical works and installed equipment and components listed below includes:- Shop drawings - As built - ...- Execution of all needed works & install all fittings and accessories required for operation.- All materials supplied (such as wires, pipes, electrical equipment…etc.) should be of the best quality and must be approved by the supervising engineer.- The work includes maintenance period for each device according to tradition in the field.- Oversees the installation and maintenance, a specialist in the field of devices - Supply, Erect & Commission the electrical equipment according to the drawings, specifications and the engineer's instructions. Also the work shall include workman ship and all accessories needed to complete the job.

7.1 Supply and install LED lighting fixture 2X24w complete with driver, type GA’ASH model Batten LED, or equivalent, including 120cm day light lamps T8, 6500 ,2500Lm each lamp, 3X1.5 mm2 wires, conduits, clamps and bolts, and connection boxes, and all other fitting and accessories. needed to complete work as per drawing and specification and engineer instruction.

No. 48

7.2 Ditto but 1x24w with special reflector for black board. No. 87.3 Ditto, but ceiling round luminaire, water proof IP65, 16w LED ,4000

complete with driver, type GA’ASH model Hermon or equivalent As per drawings and specification and engineer instruction. No. 20

7.4 Supply and install single pole 10A, 220V, ON/OFF switch, the work shallinclude all the needed accessories such as wires 3x1.5mm2, pipes,boxes, covers, fixing bolts, connection……...etc. The type is Gewiss orapproved equivalent. No. 12

7.5 Ditto, but single pole waterproof switch. No. 67.6 Ditto but single pole, two-way switch, single pole, 10A, 220V (fixel). No. 47.7 Ditto but, flush mounting socket outlet (2P+E) 10/16A, including

3x2.5mm2 wires, covers, conduits, bolts, clamps, and connection boxes,complete with all accessories for connection and commissioning. No. 20

7.8 Ditto but Waterproof socket outlet (2P+E) 10/16A, including 3x2.5mm2wires, covers, conduits, bolts, clamps, and connection boxes, completewith all accessories for connection and commissioning. No. 42

7.9 Ditto but telephone socket including 2 pair telephone cable completewith all needed wire and accessories No. 6

7.10 Supply and install 10” school electrical bell with two push buttons,including wires, conduits, clamps, bolts connection boxes ……. Etc, allaccording to the drawings, specifications & the engineer's instructions. No. 1

7.11 Supplying and installing electrical ceiling fan 220V\125W, with its wires,conduits, switch, connections…. etc. Type is CHMC or approvedequivalent. No. 12

ܭ

ܭ

ܭ



$ Amount $Item


7.12 Supplying and installing, 2x60W RMS REAL, amplifier with two horn loudspeakers waterproof type, 50 W each, two microphones, andconnections…. etc. including conduits, 2 cables for loud speakers, and allneeded accessories.

No. 1

7.13 Supplying and installing amplifier socket out let, waterproof type,including conduits, sockets and speakers’ cables 3x2.5 mm2 with allneeded accessories.

No. 27.14 Supplying and installing foundation earthing systems consisting of

welding 3X35mm galvanized steel sheets and connection to thedistribution boards, R.≤ 3 Ohm, as per drawings, specifications andengineer's instructions.

L.S 1

7.15 Supplying and executing 60cm interior diameter manhole for electricalpower and telephone cables, with 8-ton cover, 15cm base course and allthe needed materials and workmanship to complete the job asrequested by the engineer.

No. 3

Distribution Switch Boards7.16 Supply& Install the Sub distribution switch board No. SDB/G according to

drawing and specifications with all needed wirings, fittings andaccessories according to supervisor instructions as follow:- The frame specifications are the same as mentioned for P/DASwitchboard.- The SDB/G board prize includes supplying and installing the listedbelow components with all needed wirings according to specifications &supervisor engineer instructions.

No. 1

a Four poles M.C.C.B. 4X40A, 400V ABB/S804S-C25 or equivalent. No. 3b Four poles M.C.B. 4X16A, 400V ABB/S804S-C25 or equivalent. No. 1c Four poles E.LC.B. (R.C.C.B.) 4X16A, 380V ABB/F204A-40/0.03A or

equivalent No. 1d Four poles M.C.B. 4X10A, 400V ABB/S804S-C25 or equivalent. No. 1e Four poles E.LC.B. (R.C.C.B.) 4X10A, 380V ABB/F204A-40/0.03A or

equivalent. No. 1f Four poles M.C.B. 4X20A, 400V ABB/S804S-C25 or equivalent. No. 2g One poles M. C.B 1x6A type ABB/SN20IL B16 or equivalent. No. 4h One poles M. C.B 1x16A type ABB/SN20IL B16 or equivalent. No. 4

7.17 Supply& Install the Sub distribution switch board No. SDB/F (first floor )according to drawing and specifications with all needed wirings, fittingsand accessories according to supervisor instructions as follow:- The frame specifications are the same as mentioned for P/DASwitchboard.- The SDB/F board prize includes supplying and installing the listed belowcomponents with all needed wirings according to specifications &supervisor engineer instructions.

No. 1

a - Four poles M.C.B. 4X20A, 400V ABB/S804S-C25 or equivalent. No. 1b Four poles E.LC.B. (R.C.C.B.) 4X10A, 380V ABB/F204A-40/0.03A or

equivalent. No. 1c Four poles E.LC.B. (R.C.C.B.) 4X16A, 380V ABB/F204A-40/0.03A or

equivalent No. 1d Four poles M.C.B. 4X10A, 400V ABB/S804S-C25 or equivalent. No. 1e Four poles M.C.B 4X16A, 380V ABB or equivalent No. 1f One poles M. C.B 1x6A type ABB/SN20IL B16 or equivalent. No. 4g One poles M. C.B 1x16A type ABB/SN20IL B16 or equivalent No. 9



$ Amount $Item


7.18 Supply& Install the Sub distribution switch board No. SDB/S (Secondfloor ) according to drawing and specifications with all needed wirings,fittings and accessories according to supervisor instructions as follow:- The frame specifications are the same as mentioned for P/DASwitchboard.- The SDB/S board prize includes supplying and installing the listed belowcomponents with all needed wirings according to specifications &supervisor engineer instructions.

No. 1

a - Four poles M.C.B. 4X20A, 400V ABB/S804S-C25 or equivalent. No. 1b Four poles E.LC.B. (R.C.C.B.) 4X10A, 380V ABB/F204A-40/0.03A or

equivalent. No. 1c Four poles E.LC.B. (R.C.C.B.) 4X16A, 380V ABB/F204A-40/0.03A or

equivalent No. 1d Four poles M.C.B. 4X10A, 400V ABB/S804S-C25 or equivalent. No. 1e Four poles M.C.B 4X16A, 380V ABB or equivalent No. 1f One poles M. C.B 1x6A type ABB/SN20IL B16 or equivalent. No. 4g One poles M. C.B 1x16A type ABB/SN20IL B16 or equivalent No. 9

7.19 Supply and install computer Patch Panel, type ORLAN or 3 COM orequivalent, for 24 computer data outlets CAT6, with connections, nameplates and numbering.

No. 27.20 Supply and install computer data switch type 3 COM or equivalent, 24

ports, including connections, name plates and numbering. No. 2Total of Bill No. (7)Bill No. (8) Miscellaneous Works

8.1 Supply and fix fire extinguisher, 6kg capacity filled with CO2, fixed at 2mheight. As per specification, drawings and according to the Palestinianfire defence department's requirements. No. 2

8.2 Ditto but filled with dry powder 3.0kg. No. 2Total of Bill No. (8)



$ Amount $Item


SUBTOTAL OF (B) LABS Building 1 Bill No. (1) Excavation & Earth Works 2 Bill No. (2) Concrete & Block Works 3 Bill No. (3) Finishing Works 4 Bill No. (4) Carpentry & Joinery Works 5 Bill No. (5) Aluminum & metal Works 6 Bill No. (6) Plumbing & Sanitary Works 7 Bill No. (7) Electrical Works 8 Bill No. (8) Miscellaneous Works - SUB TOTAL


Unit Rate Total

$ Amount $( C) Construction Works : ExternalA –The Demolishing, Earth & Tiling Works:

1 Carefully demolish the existing external steps and reinstate the worksto its original conditions as shown in the drawings and in accordanceto the engineer's instructions. The price includes removing of all thedebris from site to approved places.

L.S 1

2 Leveling from natural ground level up to the required site designedlevels. The works including:The compaction of the soil surfaces to get (98% MDD). The excavatedmaterial should be removed out from the site to the approved placesas per specs, drawings and the engineer's instructions. M2 400

3 Supply, fill by using approved material (clean kurkar), which shall bespread in layers not exceeding 25cm each one & compacted (98%) toreach up the required levels according to the specifications & theengineer's instructions.

M3 200

4 Supply, spreading, levelling, damping and compacting 20cm (M.D.D100%) of base coarse material according to the drawings,specifications and the engineer's instructions. M2 100

5 Supply, spread, lay, colored interlock tiles 6cm thick, the priceincludes 5 cm clean sand, 10cm (M.D.D 100%) of base coarse materialcompacting, tiles, testing as per specification, drawing & theengineer's instructions, the interlocking tiles shape & color must beapproved by the engineer.

M2 370

B -Retaining Wall Works.Earthing Works:

6 Excavation from natural ground level to required retaining wallsfoundations designed level. The works include the compaction of thesoil surfaces to get (98% MDD). The excavated material should beremoved out from the site to the approved places as per theengineer's instructions.

M3 80

7 Supply, fill by using approved material (clean sand) around thefoundations, which shall be spread in layers not exceeding 25cm eachone & compacted (98%) to reach up the required levels according tothe engineer's instructions.

M3 55

ItemDescription

Unit Qty.


Unit Rate Total

$ Amount $Item


Concrete WorksRates of Concrete Works shall include: - - All form works and shuttering in any form, shape and size. Makingchamfered and curved edges, allowing for and making grooves &sleeves and the like; removal of forms & cleaning of all exposed tiewires & rods; making good the harmed surfaces & edges & all surfacefinishing.- Supplying, Casting, vibrating & curing as per specifications. - Approved additives and admixtures.- Incurred costs on Concrete Mix Designs, Sample taking, testing andproviding test results certificates, storing and saving of samples.- Supplying reinforcement of any grade, size & length as detailed inthe drawings, storing on site including cutting, bending and fixing inposition and providing all tying wires, spacers, shop drawings, testingand bar bending schedules .

Painting of exposed surfaces of underground reinforced concreteelements with primer and two coats of hot bituminous paint (75/25),the strokes of each layer to be opposite to each other.- Steel bars used for alignment and fixing of reinforcement works, andextra steel added to assure proper detailing and safety.- Measurement of Concrete elements shall be the net dimensions asdetailed in the drawings. All recesses openings and voids shall bededucted. - Measurement shall be only for the seen surfaces of elements.Overlapping and measuring items twice under separate headings shallnot be allowed.- The concrete surface must be finished with mechanical steel trowelmachine.-he prices shall include Supply & spread polythene sheets gauge 500under the foundations & ground slabs.All works must be done as per drawings, specifications & theengineer's instructions.

8 Supply & cast plain concrete B150 under the foundations. M3 39 Supply & cast ready mix concrete B300 for reinforced concrete

foundations and retaining walls (weep holes to be provided). M3 3010 Ditto, but for external steps. M3 8


Unit Rate Total

$ Amount $Item


Finishing Works: The price shall include the supply of all materials, galvanized angles,galvanized mesh, mixing, scaffolding, curing, site cleaning,equipment and workmanship required to complete the jobaccording to the specifications, drawings & engineer's approval.

11 Supply & execute external plastering 15mm thick to walls and soffits,the price shall include additional layer of 5mm thick lime free mortar(mix 1:3) as per specs, drawings & the engineer’s instructions. M2 100

12 Supply & execute two coats of Tyrolean finish with white cement &painting with one coat of superbondrol then apply two coats ofcolored emulsion paint (Supercryle) for boundary wall according tospecs & the engineer's instructions. M2 100

13 Supply and lay local marble stair treads size 36 cm wide x 3cm thickchamfered once, rebated once and laid on 2cm thick mortar bed andthe price includes marble stair risers size 12.0cm or 12.5 high x2cmthick and skirting 7/20cm high x2cm thick as per specs, drawings andthe engineer ‘s instructions.

RM 60

D- Planting Works: Supply, plant and maintain the flowing plants, trees & grassincluding all needed materials & workmanship to complete the jobaccording to the drawings, specifications and the engineer’sinstructions for the following items: -

14 Supply, fill and spread agricultural soil of not less than 30cm thick upto the required levels for the green areas as shown in the drawings,specifications and the engineer’s instructions. M2 35

15 Relocate some of the existing trees by replanting them to newlocations including all the needed materials to complete the job asshown in the drawings, specs and the engineer’s instructions. No. 7

16 Supply and plant climbers (BOUGAINVILLEA), (6-8) litter pot, height ismore than 1.0 meter and girth not less than 1.5cm as per theengineer instructions.

No. 5


Unit Rate Total

$ Amount $Item


E- Plumbing and Sanitary Works17 Supply & install stainless steel drinking unit (cylindrical shape) 1.5m3

capacity, 1.5mm thick wall thickness composed of 12 Nos. of self-pushing water taps 1/2" dia., stainless steel taps covers, inlet stainlesssteel pipe 3" dia. with elbow & firefighting connection, stainless steelvent pipe 3/4" dia. with elbow, level guide, 30cm dia. Stainless steelcover 4mm thick with gasket, 4 No. of stainless steel profile80x80x3mm legs with 80cm height, 4 Nos. of stainless steel bolts foreach leg, stainless steel drainage pipe 2" dia. connected to thenearest manhole & all needed fittings & materials to complete thejob, the price also includes the supplying & casting of the reinforcedconcrete footings size 200x200x30cm with double steel mesh 10mmdia. each 20cm as per drawings, specifications & the engineer'sinstructions.

No. 1

18 Supply & fix 1.5" dia. galvanized pipe for main water supplyconnected from the existing main water line & the water tanks asshown on the drawings & as per the engineer’s instructions, the priceshall include all the necessary fittings, valves, excavations, backfilling,concrete encasement & all needed materials to complete the job.

RM 30

19 Ditto but 1" dia for water distribution lines. RM 2020 Ditto but 3/4" dia for garden water lines. RM 5021 Supply & fix 3/4" dia. Garden water tap. No. 322 Excavate and construct percolation pit with a depth of 5.0 m and

inside diameter of 2.50 m with a special block for percolation pit,supply and install reinforced concrete 300 Kg/cm2 with thickness of25 cm for the cover of the percolation pit and supply and install castiron cover (8.0-ton capacity and 60 cm opening diameter). The priceincludes supplying and laying well graded aggregate of thickness of 40cm at the bottom of the pit, backfilling around the pit with kurkar inlayers 20cm thick each and compaction 98% MDD and connect theexisting house sewer to the pit with approved pipe type & diameter,removing the surplus soil to the tip.... etc. to complete the job as perdrawing and Engineer’s instruction.

No. 1


Unit Rate Total

$ Amount $Item


F- Miscellaneous Works23 Supply & lay Hydraulically pressed to BS 7263 pre-cast concrete

kerbstones for the sidewalks with size of (15x30x100cm) including allnecessary excavations, filling with dune sand & compaction to 98% ofMDD, the base coarse layer (30x13 cm), 200Kg/cm2 plain concretefoundation (27x12cm) under the kerb and (21x12cm) backing behind,spreading 2 cm mortar under the kerb, filling joints between kerbswith cement mortar and painting with one prime coat and twofinishing coats of approved brand name painting material ,expansionjoint every 12 meter with selotex board and filling 3cm with seka.

RM 110

24 Supply and cast R.C. ready mix concrete 250 kg/cm2 for the externalsteps ramps and others. M3 20

25 Supply and cast ready mix plain concrete 200 kg/cm2 under theexternal steps, and others. M3 5

26 Supply & fix mild steel balustrade 80cm high for corridor at groundfloor comprising of mild steel hollow section tubes 40 x 20 x 2 mmverticals spacing 15 cm center to center, & welded to mild steelhollow section coping 60x40x3 mm top & hollow section tube60x40x3 mm bottom, the price includes mild steel end angles &plates, painting with one primer, one under coats & minimum twocoats of oil paint, (the color to be approved by the Engineer, all as perspecifications, drawings & the engineer's instructions.

RM 40

27 Supply & install smooth surface pre cast reinforced concrete seat size180x45cm, the price includes the painting of the seats with one coatof Superbandrol & at least two coats of colored emulsion paint(Supercrelye) according to the drawings, specs and the engineer’sinstructions.

No. 13

28 Supply and fix galvanized steel bin 3mm thick, galvanized Steel pipe 2inch in diameter, galvanized Steel strip 10mm thick with fixing plates,anchors and anchor bolts…etc. Price to include excavation and allconcrete works 40x40x40cm, as per drawings and according toengineer instructions.

No. 9

29 Supply, fill & spread 60cm depth of gravel size ranging from 2.0 to15.0 cm in layers for the green area according to the drawings,specifications and the engineer's instructions. The price includes theexcavation from natural ground levels to the required designed levels& the excavated materials should be removed out from the site to theapproved places.

M2 130

Total of Bill No. (1)SUBTOTAL OF (C) External Works

1 Bill No. (1) External Works - SUB TOTAL


(D) provisional items works Unit Rate Total

$ Amount $Bill No. (1) Electricity Items1-Main Power Supply Components

1.1 Supply and install outdoor 250 KVA-22/0.4KV transformer completed withall other needed component Such as Lattice steel pole with base, steelarms, fuse holder,36 Kv isolator , Low voltage main LTL switch, also priceinclude all needed M.V cables , With all needed civil works and any otherneeded materials and workmanship to complete the job according toGDECO design study drawings specifications and the engineer’sinstructions

LS 1

1.2 Enlargement of the existing power supply sub scription from 3x100A to3x400A with tacking in consideration Removing the old existing WHmeter,and rearrange the panel , according to GDECO regulation withcomplete needed fees

LS 1

2-Stage Lighting System Supply and install the following items according to the drawings, specifications and the engineer's instructions:

1.3Stage lighting system (optional item –1) - 500 W Fresnel spot lights as (SFR) of FURSE or equivalent. No. 4

1.4 650 W Fresnel spot lights as (JER/TH) of FURSE or equivalent. No. 41.5 1000W Fresnel spot lights as (MFR/TH) of FURSE or equivalent. No. 61.6 500W profile spot lights as (SPR/TH) of FURSE or equivalent. No. 41.7 650W profile spot lights as (SPR/TH) of FURSE or equivalent. No. 41.8 1000 profile spot lights as (MPR/TH) of FURSE or equivalent. No. 61.9 50 mm diameter aluminum spot bars complete with all accessories

needed as cat No.30. 1B. 12 of FURSE or equivalent. RM 50

1.10Stage lighting system (optional item –2)Supply, install, connect & commission stage lighting as follows:3. Variable Beam Angle profile spot light- 1000/1200 Z 00 TWW of CCT Lighting

No. 3

1.11 1000/1200 Z 00TX of CCT Lighting. No. 31.12 2000/1200 Z0 DWW of CCT Lighting No. 31.13 4. Starlette Fresnel projectors:

- 1000/1200 Z0050Fresnel of CCT Lighting No. 31.14 2000 Z0080 Fresnel of CCT Lighting. No. 31.15 5. Condenser Variable bean profile:

- 650 Z0602 minute of CCT Lighting. No. 51.16 650 0603 minute of CCT Lighting No. 51.17 500/650 0608 minute of CCT Lighting. No. 51.18 6. Spot bars of (CCT Lighting) MR 501.19 7. Connector Box (of CCT Lighting) No. 41.20 8. load Sockets of (CCT Lighting) No. 301.21

9. Starlette Fresnel projectors- 1000/1200 Z0050Fresnel of CCT Lighting No. 6

ItemDescription

Unit Qty.


(D) provisional items works Unit Rate Total

$ Amount $Item


System Video Conference

1.22

System Video Conference-Pcs-1pQuantity:1- ISDN MCU software (MB Memory Stick) PCS-320M1Quantity:1- Wired Microphone for PCS-1PVC SYSTEM-PCS-A1Quantity:1-6 BRI ISDN UNIT FOR PCS-IP VC SYSTEM-PCS-B384Quantity:1- DATA SOLUTION BOX/PCS-DSB1Quantity:1- Microphone Mc – 906 Quantity:1

No. 1

1.23

Supply, install, connect & commission Video projection system complete with wires, cables, conduits, boxes and all accessories as shown in the drawings and specifications 650W profile spot lights as (SPR/TH) of FURSE or equivalent. No. 4

1.24

. XGA data video projector as per specifications. Quantity:1. Video cassette player recorder. Quantity:1. Motorized large screen. Quantity:1. Wiring network. Quantity:1. Installation & system functioning.Quantity:1. Total value of equipment.Quantity:1

LS 1

Total of Bill No. (1)- SUB TOTAL of (D) provisional items works


Total Amount ( $ )

Construction Works : ( A) M.P.H Building

Construction Works : ( B) Labs Building

Construction Works : ( C) External Works

Construction Works : ( D) provisional items Works

Grand total of the school works

Title: ………………………………………..……………………..………………………….………….Telephone:………………………………………………………………………………………..…….Fax: ……………………………………………………………………………………………...……….Mobile: …………………………………………………….…..………………………………..……….

Lot 2: Rehabilitation Works for the Rosary Sisters SchoolGeneral Summary

Item Description

Total in numbers: ........................................................................................................................Total in letters: ............................................................................................................................. Name of the contractor: ………….………..……………………………………………………...... Authorized signature: ……………...………………….………………………………………...…..Signature and Sealing:…………………………………………………...…………………….…….

Page 42 of 42 Contractor Signature Stamp

boq - lot 2.xlsx - undp | procurement notices

Documents