DETAIL A

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

A A

B B

C C

D D

A

T-1CATION TANK

36" DIA x 72" HIGH

T-2ANION TANK

36" DIA x 72" HIGH

58"

2 3/8"

57 1/4"103 1/2"

108"

10 1/2" 12 3/4"

26 1/4"

101 1/2"REFERENCE

(SEE NOTE 16)

B

AC

A

B

C

V-26FV-3

FCV-3

FCV-1

V-10

FV-1

FV-5

E-1

V-8

TUBE TOV-16

FV-2

FI-1

FV-6

V-12

V-1

FE-1

V-6 V-2FV-7 V-7FV-13 FV-4

CE-1

FV-10

V-9

TUBE TOV-17

E-2

FV-12

FV-8

V-11

FV-9

FC-2

FV-14

V-25

V-3V-13

FV-11

V-18

V-17

V-16

TUBE TOV-18

CONSTRUCTION NOTES:

1. ALL PRESSURE VESSELS CONSTRUCTED AS NON-CODE.WORKING PRESSURE DESIGN IS 100 PSIG WITH A TEST PRESSURE OF 130 PSIG.MATERIAL IS FIBERGLASS REINFORCED COMPOSITE MATERIAL.

2. STRUCTURAL STEEL SKID TO BE SANDBLASTED TO ACOMMERCIAL BLAST AND COATED WITH 3-5 MILS OF TNEMEC SERIES 161 MARLOSAFETY BLUE EPOXY.

3. ALL PRESSURE VESSEL INTERNAL DISTRIBUTORS TO BE SCH 80 PVC WITH FINESLOTTED NOZZLES.

4. ALL AUTOMATIC FLOW VALVES TO BE "Y" PATTERN DIAPHRAGM OPERATED GLOBE VALVES PNEUMATICALLY OPERATED. VALVES TO BE MANUFACTURED OF ENGINEERINGTHERMOPLASTIC WITH PVC CONNECTIONS AND TRIM. ALL STRONG CHEMICAL VALVESTO BE PVC BALL VALVES WITH SPRING RETURN ACTUATOR. ALL VALVES TO HAVE A POSITION INDICATOR DEVICE.

5. ALL MANUAL ISOLATING VALVES TO BE QUARTER TURN BALL VALVES WITH EPDMSEALS ANS SOLVENT WELD OR SCREWED CONNECTIONS.

6. ALL EXTERNAL PIPING TO BE SCH 80 PVC. ALL EXTERNAL FITTINGS AND FLANGES TO BE SCH 80 PVC WITH SOCKET WELD CONNECTIONS. SOME ITEMS MAY BE THREADED WHEN REQUIRED.

7. ALL PNEUMATIC VALVE CONTROL TUBING TO BE 1/4" OD POLYETHYLENE BLACKTUBING. ALL TUBING TO BE NEATLY BUNDLED TO PIPING MANIFOLDS.

8. ALL ELECTRICAL CONTROL ENCLOSURES TO BE NEMA 4 WITH MANUFACTURESSTANDARD PAINT.

9. ALL EXTERIOR HIGH VOLTAGE (115V OR HIGHER) WIRING TO BE CONTAINED INEMT STEEL CONDUIT WITH LIQUID TIGHT FITTINGS. CONDUIT RUNS 6" ORSHORTER MAY BE CONTAINED IN LIQUID TIGHT FLEXIBLE CONDUIT SUITABLEFOR OUTDOOR USE. ALL EXTERIOR LOW VOLTAGE CONDUIT (24V OR LOWER) WILLBE 3 WIRE CABLE NEATLY BUNDLED WITH THE MANIFOLD PIPING.

10. FLOW RATES (CATION):

SERVICE: 56 GPM BACKWASH: 35 GPM ACID DRAW: 2.3 GPM (CONCENTRATED) DILUTION WATER: 12 (DILUTE TO 5% CHEMICAL) SLOW RINSE: 12 GPM FAST RINSE: 56 GPM

11. FLOW RATES (ANION):

SERVICE: 50 GPM BACKWASH: 20 GPM CAUSTIC DRAW: 0.7 GPM (CONCENTRATED) DILUTION WATER: 12 (DILUTE TO 4% CHEMICAL) SLOW RINSE: 12 GPM FAST RINSE: 56 GPM

12. ION EXCHANGE MEDIA MEDIA (CATION)

MANUFACTURER: RESINTECH TYPE: CG-8 QTY PER VESSEL: 25 CU. FT. BED DEPTH: 39" TYPE OF REGENERANT: 30% HCL QTY OF REGENERANT: 6# PER CU. FT. OF RESIN

13. ION EXCHANGE MEDIA MEDIA (ANION)

MANUFACTURER: RESINTECH TYPE: SBG-2 QTY PER VESSEL: 25 CU. FT. BED DEPTH: 39" (CHLORIDE FORM), 47" (HYDROXIDE FORM) TYPE OF REGENERANT: 50% NAOH QTY OF REGENERANT: 6# PER CU. FT. OF RESIN

14. SHIPPING WEIGHTS:

EQUIPMENT ONLY: 1,500 LBS MEDIA ONLY: 2,135 LBS TOTAL: 3,635 LBS

15. OPERATING WEIGHTS: 7,000 LBS

16. OVER ALL HEIGHT IS FOR REFERENCE ONLY. ACTUAL HEIGHT MAY VERY BASED ON RESIN TANK USED.

CONNECTION TABLEITEM DESCRIPTION MAX FLOW SIZE LOCATION CONNECTION MATERIAL

A CITY WATER INLET 56 GPM 2" MSB-3672 150# FLANGED SCH80 PVCB PRODUCT WATER OUTLET 50 GPM 2" MSB-3672 150# FLANGED SCH80 PVCC WASTE WATER OUTLET 56 GPM 2" MSB-3672 150# FLANGED SCH80 PVCD 30% Hcl INLET 2.3 GPM 3/4" MSB-3672 FNPT SCH80 PVCE 50% NaOH INLET 0.7 GPM 3/4" MSB-3672 FNPT SCH80 PVCF AIR SUPPLY INLET 1/4" MSB-3672 FNPT BRASS

ED

V-23

V-27

V-24

V-19V-20 V-21

V-14 V-15

91 1/8"

PI-1

PI-2

PI-3

36" MINIMUM CLEARANCEREQUIRED FOR MEADIA LOADING