data sheet premium digital force gauges series bg · 2020. 7. 22. · data sheet mark-10...

Data Sheet

Mark-10 Corporation � www.mark-10.com � [email protected]: 888-MARK-TEN � Tel: 631-842-9200 � Fax: 631-842-9201

Premium Digital Force Gauges Series BGThe Series BG Digital Force Gauge is an advanced force measurement instrument, with sophisticated measurement capabilities, data outputs, computer control capa-bilities, and a long list of features and configurable settings.

Specifi cations

Dimensionsin [mm]

Ordering Information

Accuracy: ±0.2% of full scale ±1 digitSampling rate: 65 readings/sDisplay rate: 2.5 updates/s in normal mode / 65 updates/s in peak modePower: AC or rechargeable battery with Intelligent Power Management System (IPM), a 3-step system that warns the user via a “LO BAT” indicator and then powers off the gauge.Battery life: 8-10 hours of continuous useSelectable units of measurement: lbF, N, kg/g (depending on model)Outputs: Standard RS-232 Fully configurable up to 9600 baud. Includes Gauge Control Language (GCL) for full computer control of all functions. Mitutoyo (Digimatic) Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog ±1 VCD, ±0.25% of full scale at capacity. + for compression, - for tension. General purpose I/O Three open collector outputs and one input (utilizing Mitutoyo lines) Set points Three open collector lines (utilizing Mitutoyo lines)Configurable settings: Analog filter, digital filters, RS-232, outputs selection (other than RS-232), automatic output (RS-232), automatic shutoff, initial (default), averaging mode, calibrationLoad cell deflection: 0.010 in [0.25 mm] at full capacitySafe overload: 150% of full scale (display shows “----” at 110% and above)Weight (gauge only): BG012 - BG200: 0.95 lb [0.4 kg], BG500: 1.12 lb [0.5 kg]Environmental requirements: 40° F - 100°F [5°C - 45°C], <96% humidity (non-condensating)Thermal effects: Zero: 0.03% of full scale/°C, Span: 0.01% of full scale/°CHousing construction: AluminumIncluded accessories: Chisel, cone, V-groove, hook, flat, extensionWarranty 3 years (see individual statement for further details)

BG012 0.12 x 0.00005 lbF, 50 x 0.02 gF, 0.5 x 0.0002 N, 110VBG025 0.25 x 0.0001 lbF, 100.00 x 0.05 gF, 1 x 0.0005 N, 110VBG05 0.5 x 0.0002 lbF, 250 x 0.1 gF, 2.5 x 0.001 N, 110VBG2 2 x 0.001 lbF, 1 x 0.0005 kgF, 10 x 0.005 N, 110VBG5 5 x 0.002 lbF, 2.5 x 0.001 kgF, 25 x 0.01 N, 110VBG10 10 x 0.005 lbF, 5 x 0.002 kgF, 50 x 0.02 N, 110VBG20 20 x 0.01 lbF, 10 x 0.005 kgF, 100 x 0.05 N, 110VBG50 50 x 0.02 lbF, 25 x 0.01 kgF, 250 x 0.1 N, 110VBG100 100 x 0.05 lbF, 50 x 0.02 kgF, 500 x 0.2 N, 110VBG200 200 x 0.1 lbF, 100 x 0.05 kgF, 1000 x 0.5 N, 110VBG500 500 x 0.2 lbF, 250 x 0.1 kgF, 2500 x 1 N, 110V

For 220V operation, add suffix E to model number. Example: BG10E

ØA 0.200 [5.8] 0.312 [7.9]B 0.19 [4.8] 0.44 [11.2]C 0.35 [8.9] 0.31 [7.9]Thread #10-32 5/16-18

Model No. Capacity x Resolution

BG012 - BG200 BG500

32-1041 REV 0

Data outputs RS-232, Mitutoyo (Digimatic), and analog outputs. Automatic timed output (RS-232) included.Set points Programmable high and low force set points for triggering external devices (ex. motorized test stand, alarm, etc).Data averaging Calculates average force over a specified time (programmable)External trigger Useful for contact or switch activation force testing and data captureReversible Housing can be reversed for handheld or housing test stand use

Features

Optional EquipmentOutput cables Various data output cables are availableHi / lo limits indicator Set limit conditions for a test - the indicator will display red lights for high and low 11-1022 limits, and a green light to indicate passing. Overload protection module Protects the force gauge against overloads during motorized tests. Adjustable from 11-1042 10% to 150% of gauge’s full capacity. For use with motorized test stands. Set point cable Stops test stand travel at programmable high and low set points for tension and 09-1090 compression forces. For use with motorized test stands.

Data Sheet


The innovative BGI Universal Force / Torque Gauge is the ultimate in force and torque measurement flexibility. With all the features of the Series BG, coupled with compatibility with a wide selection of interchangeable force and torque sensors, the BGI is a ver-satile solution for many force and torque testing applications. All sensors are fully interchangeable and do not require additional configuration or calibration.

Universal Force / Torque Gauge Model BGI32-1042 REV 0 Page 1 of 7

Series STJ Universal torque sensors, fixed chuck

Series STHUniversal torque sensors, interchangeable attachments

Series STE Wrench extension torque sensors

Series STBClosure torque sensors

» Sensor specifications provided on following pages

Series SSTension / compression sensors

Series SSMInline tension / compression sensors

Series SJRMiniature tension / compression sensors

Series SBCCompact compression sensors

Series SHPErgonomics testing push / pull sensors

Series STC Static torque sensors

Data Sheet


Universal Force / Torque Gauge Model BGIBGI Specifi cations

Dimensionsin [mm]


Accuracy: ±0.1% of full scale ±1 digit + sensorSampling rate: 65 readings/sDisplay rate: 2.5 updates/s in normal mode / 65 updates/s in peak modePower: AC or rechargeable battery with Intelligent Power Management System (IPM), a 3-step system that warns the user via a “LO BAT” indicator and then powers off the gauge.Battery life: 8-10 hours of continuous useSelectable units of measurement: lb, kg, g, N, ozin, lbFin, kgFmm, kgFm, Ncm, Nm (depending on sensor)Outputs: Standard RS-232 Fully configurable up to 9600 baud. Includes Gauge Control Language (GCL) for full computer control of all functions. Mitutoyo (Digimatic) Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog ±1 VCD, ±0.25% of full scale at capacity. + CW, - for CCW. General purpose I/O Three open collector outputs and one input (utilizing Mitutoyo lines) Set points Three open collector lines (utilizing Mitutoyo lines)Configurable settings: Analog filters, digital filters, RS-232, outputs selection (other than RS-232), automatic output (RS-232), automatic shutoff, initial (default), averaging mode, calibrationWeight (gauge only): 0.9 lb [0.4 kg]Environmental requirements: 40° F - 100°F [5°C - 45°C], <96% humidity (non-condensating)Thermal effects: Zero: 0.03% of full scale/°C, Span: 0.01% of full scale/°C for all remote sensorsHousing construction: AluminumWarranty 3 years (see individual statement for further details)

BGI Universal Force / Torque Gauge, 110VBGIE Universal Force / Torque Gauge, 220V

Output cables Various data output cables are availableHi / lo limits indicator Set limit conditions for a test - the indicator will display red lights for high and low 11-1022 limits, and a green light to indicate passing. Overload protection module Protects the remote sensor against overloads during motorized tests, adjustable from 11-1042 10 - 150% of the sensor’s full capacity. For use with motorized test stands. Set point cable Stops test stand motion at programmable high and low set points for tension and 09-1090 compression or CW and CCW. For use with motorized test stands.Test stand mounting kit Allows the BGI to be mounted to TS-Series force or torque test standAC1004Tabletop stand Includes gauge mounting screws, and holes for mounting to a workbench. Display AC1008 angle can be adjusted.

Model No. Description

The BGI and all sensors are supplied with an NIST-traceable certificate of calibration

Page 2 of 732-1042 REV 0

Optional EquipmentInterchangeable remote force & torque sensorsData outputs RS-232, Mitutoyo (Digimatic), and analog outputs. Automatic timed output (RS-232) included.Set points Programmable high and low force set points for triggering external devices (ex. motorized test stand, alarm, etc).Data averaging Calculates average force over a specified time (programmable)External trigger Useful for contact or switch activation force testing and data capture

Features

Data Sheet


STJ10Z 10 x 0.01 ozFin, 7 x 0.005 kgFmm, 7 x 0.005 Ncm STJ20Z 20 x 0.02 ozFin, 14 x 0.01 kgFmm, 14 x 0.01 Ncm STJ50Z 50 x 0.05 ozFin, 36 x 0.05 kgFmm, 35 x 0.05 Ncm STJ12 12 x 0.01 lbFin, 140 x 0.1 kgFmm, 135 x 0.1 NcmSTJ50 50 x 0.05 lbFin, 580 x 0.5kgFmm, 570 x 0.5 Ncm STJ100 100 x 0.1 lbFin, 1150 x 1 kgFmm, 1150 x 1 Ncm

Model No. Capacity x resolution Chuck capacity: STJ10Z - STJ50Z: 0.38 in [9.5 mm] STJ12 - STJ100: 0.5 in [12.7 mm]Accuracy: ±0.35% of full scale + BGI Safe overload: STJ10Z - STJ50Z: 300% of full scale STJ12 - STJ50: 150% of full scaleWeight: 1.4 lb [0.6 kg]


STJ10Z - STJ50Z 4.82 [122.4] STJ12 - STJ100 5.19 [131.8]

Specifi cations

Measure bi-directional torque for a wide variety of ap-plications. Contains a chuck for up to 1/2” diameter samples. The sensor can be used as a hand held device, or mounted to a test stand. Capacities available from 10 ozFin to 100 lbFin.

Model No. A

in [mm]

Universal Torque Sensors Series STJ

Universal Force / Torque Gauge Model BGIPage 3 of 732-1042 REV 0

A great solution for general bi-directional torque testing applications with several different sample sizes. Three interchangeable chuck capacities and bit holder are available. The STH has superb overload protection and is available in capacities from 10 ozFin to 100 lbFin.

STH10Z 10 x 0.01 ozin, 7 x 0.005 kgFmm, 7 x 0.005 Ncm STH20Z 20 x 0.02 ozin, 14 x 0.01 kgFmm, 14 x 0.01 Ncm STH50Z 50 x 0.05 ozin, 36 x 0.05 kgFmm, 35 x 0.05 Ncm STH12 12 x 0.01 lbFin, 140 x 0.1 kgFmm, 135 x 0.1 Ncm STH50 50 x 0.05 lbFin, 580 x 0.5 kgFmm, 570 x 0.5 Ncm STH100 100 x 0.1 lbFin, 1150 x 1 kgFmm, 1150 x 1 Ncm G1016-1 Jacobs chuck for STH, 0.028”-0.25” G1016-2 Jacobs chuck for STH, 0.062”-0.375” G1016-3 Jacobs chuck for STH, 0.078”-0.5” G1017 Bit holder for STH, 1/4” hex

Model No. Capacity x resolution Chuck and bit capacities: G1016-1: 0.028 - 0.25 in [0.7 - 6.3 mm] G1016-2: 0.062 - 0.375 in [1.6 - 9.5 mm] G1016-3: 0.078 - 0.5 in [2.0 - 12.7 mm] G1017: 0.25 in [6.3 mm] hexAccuracy: ±0.2% of full scale + BGI Safe overload: STH10Z - STH20Z: 300% of full scale STH12 - STH50: 200% of full scale STH100: 150%Weight: From 1.4 lb [0.6 kg]

Specifi cations Ordering Information

G1016-3 G1016-1

G1016-2 G1017

in [mm]

Universal Torque Sensors Series STH

Data Sheet



STE20 20 x 0.02 lbFin, 230 x 0.2 kgFmm, 220 x 0.2 NcmSTE50 50 x 0.05 lbFin, 580 x 0.5 kgFmm, 570 x 0.5 NcmSTE100 100 x 0.1 lbFin, 1150 x 1 kgFmm, 1150 x 1 NcmSTE200 200 x 0.2 lbFin, 2300 x 2 kgFmm, 2200 x 2 Ncm STE400 400 x 0.5 lbFin, 4600 x 5 kgFmm, 4500 x 5 Ncm STE1000 1000 x 1 lbFin, 11500 x 10 kgFmm, 11000 x 10 Ncm STE5000 5000 x 5 lbFin, 55 x 0.05 kgFm, 550 x 0.5 Nm

Model No. Capacity x resolution

Accuracy: ±0.6% of full scale + BGI Safe overload: 150% of full scaleWeight: 0.6 - 2.0 lb [0.3 - 0.9 kg], depending on model


STE20 - STE100 1.88 [47.8] 0.56 [14.2] 1.00 [25.4] 1/4”STE200 - STE400 3.00 [76.2] 0.73 [18.5] 1.12 [28.6] 3/8”STE1000 3.50 [88.9] 0.98 [24.9] 1.25 [31.8] 1/2”STE5000 5.00 [127.0] 1.48 [37.6] 2.0 [50.8] 3/4”

Specifi cations

Convert any wrench to a torque tool with this sensor, or use it as a component of a torque testing system. Capacities avail-able from 20 lbFin to 5,000 lbFin.

Model No. A ØB ØC Drive Size

in [mm]

Calibrate torque tools, or use it as a component of a torque testing system. Tapped holes on every surface allow for easy mounting to a work bench or fixture. Capacities available from 10 ozFin to 100 lbFin.

STC10Z 10 x 0.01 ozFin, 7 x 0.005 kgFmm, 7 x 0.005 Ncm STC20Z 20 x 0.02 ozFin, 14 x 0.01 kgFmm, 14 x 0.01 Ncm STC50Z 50 x 0.05 ozFin, 36 x 0.05 kgFmm, 35 x 0.05 Ncm STC12 12 x 0.01 lbFin, 140 x 0.1 kgFmm, 135 x 0.1 Ncm STC50 50 x 0.05 lbFin, 580 x 0.5 kgFmm, 570 x 0.5 Ncm STC100 100 x 0.1 lbFin, 1150 x 1 kgFmm, 1150 x 1 Ncm


Accuracy: ±0.35% of full scale + BGI Safe overload: STC10Z - STC50Z: 300% of full scale STC12 - STC100: 150% of full scaleWeight: 1.2 lb [0.5 kg]

Specifi cations


in [mm]

Wrench Extension Torque Sensors Series STE

Static Torque Sensors Series STC

Data Sheet



Ideal for testing torque on bottle caps and containers. Reversible jaws or movable posts, depending on model, effectively accommodate a variety of shapes and sizes. Capacities available from 10 ozFin to 100 lbFin.

STB10Z 10 x 0.01 ozFin, 7 x 0.005 kgFmm, 7 x 0.005 NcmSTB20Z 20 x 0.02 ozFin, 14 x 0.01 kgFmm, 14 x 0.01 Ncm STB50Z 50 x 0.05 ozFin, 36 x 0.05 kgFmm, 35 x 0.05 Ncm STB12 12 x 0.01 lbFin, 140 x 0.1 kgFmm, 135 x 0.1 Ncm STB50 50 x 0.05 lbFin, 580 x 0.5 kgFmm, 570.0 x 0.5 NcmSTB100 100 x 0.1 lbFin, 1150 x 1 kgFmm, 1150 x 1 Ncm


Accuracy: ±0.7% of full scale + BGISafe overload: STB10Z - STB50Z: 300% of full scale STB12 - STB100: 150% of full scale Weight: STB10Z - STB50Z: 2.2 lb [1.0 kg] STB12 - STB100: 5.4 lb [2.5 kg]

Specifi cations


in [mm]

STB10Z - STB50Z

STB12 - STB100

in [mm]

Closure Torque Sensors Series STBClosure Torque Sensors Series STB

A rugged sensor for measuring tensile and compressive force of up to 10,000 lbF. Durable S-Beam design with threaded holes on two sides allows for many applications and setups. Steel construction ensures many years of use.

SS50 50 x 0.02 lbF, 25 x 0.01 kgF, 250 x 0.1 N SS100 100 x 0.05 lbF, 50 x 0.02 kgF, 500 x 0.2 N SS200 200 x 0.1 lbF, 100 x 0.05 kgF, 1000 x 0.5 N SS500 500 x 0.2 lbF, 250 x 0.1 kgF, 2500 x 1 N SS1000 1000 x 0.5 lbF, 500 x 0.2 kgF, 5000 x 2 N SS2000 2000 x 1 lbF, 1000 x 0.5 kgF, 10000 x 5 N SS5000 5000 x 2 lbF, 2500 x 1 kgF, 25 x 0.01 kN SS10000 10000 x 5 lbF, 5000 x 2 kgF, 50 x 0.02 kN


Accuracy: ±0.15% of full scale + BGI Safe overload: 150% of full scaleWeight: From 1.9 - 3.0 lb [0.9 - 1.4 kg]

Specifi cations


in [mm]

Model No. A B C D ESS50

2.40 [61.0]2.00

[50.8]

0.46 [11.7]

0.65 [16.5]

1/4-28 UNF

SS100SS200SS500 0.71

[18.0]0.90

[22.9] 1/2-20 UNF

SS1000SS2000

0.96 [24.4]

1.15 [29.2]

SS50003.90 [99.1]

3.00 [76.2]

3/4-16 UNFSS10000

Tension / Compression Sensors Series SS

Data Sheet


SSM025 0.25 X 0.0001 lbF, 100 x 0.05 gF, 1 x 0.0005 N SSM05 0.5 x 0.0002 lbF, 250 x 0.1 gF, 2.5 x 0.001 N SSM2 2 x 0.001 lbF, 1 x 0.0005 kgF, 10 x 0.005 N SSM5 5 x 0.002 lbF, 2.5 x 0.001 kgF, 25 x 0.001 N SSM10 10 x .005 lbF, 5 x 0.002 kgF, 50 x 0.02 N SSM20 20 x 0.01 lbF, 10 x 0.005 kgF, 100 x 0.05 N SSM50 50 x 0.02 lbF, 25 x 0.01 kgF, 250 x 0.1 N SSM100 100 x 0.05 lbF, 50 x 0.02 kgF, 500 x 0.2 N


Accuracy: ±0.15% of full scale + BGI Safe overload: SSM025 - SSM2: 200% of full scale SSM5 - SSM100: 150% of full scaleWeight: 0.4 lb [0.2 kg]


Specifi cations

Measures tensile and compressive loads for a wide variety of applications, available in capacities from 0.25 lbF to 100 lbF. Threaded holes on two sides can accept a variety of hooks and implements, making this sensor par-ticularly well suited for inline tests.

in [mm]


Inline Tension / Compression Sensors Series SSM

SJR025 0.25 X 0.0001 lbF, 100 x 0.05 gF, 1 x 0.0005 N SJR05 0.5 x 0.0002 lbF, 250 x 0.1 gF, 2.5 x 0.001 N SJR2 2 x 0.001 lbF, 1 x 0.0005 kgF, 10 x 0.005 N SJR5 5 x 0.002 lbF, 2.5 x 0.001 kgF, 25 x 0.001 N SJR10 10 x .005 lbF, 5 x 0.002 kgF, 50 x 0.02 N SJR20 20 x 0.01 lbF, 10 x 0.005 kgF, 100 x 0.05 N SJR50 50 x 0.02 lbF, 25 x 0.01 kgF, 250 x 0.1 N SJR100 100 x 0.05 lbF, 50 x 0.02 kgF, 500 x 0.2 N


Accuracy: ±0.2% of full scale + BGI Safe overload: 200% of full scale Weight: 0.015 lb [0.007 kg]


Specifi cations

Extremely compact force measurement sensor for tensile and compressive loads in applications with limited space. Capacities available from 0.25 lb to 100 lbF. The sensors include threaded holes on two sides for the mounting of attachments or imple-ments.

in [mm]

Miniature Tension / Compression Sensors Series SJR

Data Sheet


SBC100 100 x 0.05 lbF, 50 x 0.02 kgF, 500 x 0.2 N SBC200 200 x 0.1 lbF, 100 x 0.05 kgF, 1000 x 0.5 N SBC500 500 x 0.2 lbF, 250 x 0.1 kgF, 2500 x 1 N SBC1000 1000 x 0.5 lbF, 500 x 0.2 kgF, 5000 x 2 N SBC2000 2000 x 1 lbF, 1000 x 0.5 kgF, 10000 x 5 N SBC5000 5000 x 2 lbF, 2500 x 1 kgF, 25 x 0.01 kN SBC10000 10000 x 5 lbF, 5000 x 2 kgF, 50 x 0.02 kN


Accuracy: ±0.5% of full scale + BGI Safe overload: 150% of full scaleWeight: From 0.4 lb [0.2 kg]


Specifi cations

Button type sensor for compressive loads of up to 10,000 lbF. Compact and rugged, the SBC is ideal for heavy duty applications with space constraints.

in [mm]

Model No. ØA ØB C D ØE F ØG

SBC100 - SBC20001.23

[31.3]0.32 [8.1]

0.05 [1.3]

0.39 [9.9]

1.0 [25.4]

THRU0.83

[21.1]

SBC5000 - SBC100001.48

[37.6]0.43

[10.9]0.07 [1.8]

0.62 [15.8]

1.25 [31.8]

0.25 [6.4]

1.08 [27.4]

Compact Compression Sensors Series SBC


SHP500 500 x 0.2 lbF, 250 x 0.1 kgF, 2500 x 1 N Model No. Capacity x resolution

Accuracy: ±0.15% of full scale + BGI Safe overload: 150% of full scale


Specifi cations

Fully enclosed sensor for pull / push testing. Useful in ergonomics testing, workplace safety testing, and general lifting or push/pull requirements. For up to 500 lbF of force.

in [mm]

Pull / Push Sensors Series SHP

Data Sheet


Advanced Digital Force Gauges Series EG32-1043 REV 0

The Series EG is an ideal instrument for compression and tension applications requiring accuracy and flexibility up to 500 lbF. Features include selectable units of measurement, automatic peak memory, simple pushbutton calibration, program-mable automatic shutoff, initial status of units and mode of operation, permanent configuration memory, and optional outputs (RS-232, Mitutoyo, and analog). Reversible aluminum housing allows for hand-held use or test stand mounting.

Specifi cations

Outputs package RS-232, Mitutoyo (Digimatic), and analog outputs. Available at time of purchase or EGRS as an upgrade.Output cables Various data output cables are availableOverload protection module Protects the force gauge against overloads during motorized tests, adjustable from 11-1042 10% to 150% of gauge’s full capacity. For use with motorized test stands. Requires EGRS.

Dimensionsin [mm]


For 220V operation, add suffix E to model number. Example: EG50E

Accuracy: ±0.3% of full scale ±1 digitSampling rate: 30 readings/sDisplay rate: 2.5 updates/s in normal mode / 30 updates/s in peak modePower: AC or rechargeable battery with Intelligent Power Management System (IPM). IPM warns the user via a “LO BAT” indicator and then will power off the gauge Battery life: 8-10 hours of continuous useSelectable units of measurement: lbF, N, kg/g (depending on model) Outputs: Optional RS-232 Fully configurable up to 9600 baud Mitutoyo (Digimatic) Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog ±1 VDC, ±0.25% of full scale at capacity. + for compression, - for tension.Configurable settings: RS-232, Mitutoyo BCD, automatic shutoff, initial (default), calibrationLoad cell deflection: 0.010 in [0.25 mm] at full capacitySafe overload: 150% of full scale (display shows “----” at 110% and above)Weight (gauge only): EG012 - EG200: 0.95 lb [0.4 kg], EG500: 1.12 lb [0.5 kg]Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)Thermal effects: Zero: 0.03% of full scale/°C, Span: 0.01% of full scale/°CHousing construction: AluminumIncluded accessories: Hook, flat

ØA 0.200 [5.8] 0.312 [7.9]B 0.19 [4.8] 0.44 [11.2]C 0.35 [8.9] 0.31 [7.9]Thread #10-32 5/16-18

EG012 0.12 x 0.0001 lbF, 50 x 0.05 gF, 0.5 x 0.0005 N, 110V EG025 0.25 x 0.0001 lbF, 100 x 0.05 gF, 1 x 0.0005 N, 110V EG05 0.5 x 0.0002 lbF, 250 x 0.1 gF, 2.5 x 0.001 N, 110V EG2 2 x 0.001 lbF, 1 x 0.0005 kgF, 10 x 0.005 N, 110V EG5 5 x 0.002 lbF, 2.5 x 0.001 kgF, 25 x 0.01 N, 110V EG10 10 x 0.005 lbF, 5 x 0.002 kgF, 50 x 0.02 N, 110V EG20 20 x 0.01 lbF, 10 x 0.005 kgF, 100 x 0.05 N, 110V EG50 50 x 0.02 lbF, 25 x 0.01 kgF, 250 x 0.1 N, 110V EG100 100 x 0.05 lbF, 50 x 0.02 kgF, 500 x 0.2 N, 110V EG200 200 x 0.1 lbF, 100 x 0.05 kgF, 1000 x 0.5 N, 110V EG500 500 x 0.2 lbF, 250 x 0.1 kgF, 2500 x 1 N, 110V

EG012 - EG200 EG500


Optional Equipment

Data outputs Optional RS-232, Mitutoyo (Digimatic), and analog outputs.Push-button Simple and quick calibration procedurecalibrationPeak memory For tension and compressionSelectable units Measure in lbF, kg/g, or N (depending onof measurement model)Customizable Set filters, communications settings,default measurement settings, mode of operation,configuration and more

Features

Data Sheet


The Series MG Digital Force Gauge is an economical instrument for push and pull testing up to 500 lbF. A rugged reversible aluminum housing allows for hand-held use or test stand mounting. Three pushbuttons allow the user to easily select units of measurement, reset zero, and recall tensile and compressive peak loads. The MG is compatible with all Mark-10 force measurement test stands and gripping fixtures.

Specifi cations

Dimensionsin [mm]


Accuracy: ±0.5% of full scaleSampling rate: 30 readings/sDisplay rate: 2.5 updates/s in normal operation / 30 updates/s in peak modePower: AC or non-rechargeable 9V battery, with Intelligent Power Management System (IPM). IPM warns the user via a “LO BAT” indicator and then will power off the gauge. Battery life: 30 hours of continuous useSelectable units of measurement: lbF, N, kg/g (depending on model)Load cell deflection: 0.010 in [0.25 mm] at full capacitySafe overload: 150% of full scale (display shows “----” at 110% and above)Weight (gauge only): MG012 - MG200: 0.7 lb [0.3 kg], MG500: 0.87 lb [0.4 kg]Environmental requirements: 40° F - 100°F [5°C - 45°C], <96% humidity (non-condensating)Thermal effects: Zero: 0.03% of full scale/°C, Span: 0.01% of full scale/°CHousing construction: AluminumIncluded accessories: Hook, flatWarranty 3 years (see individual statement for further details)

MG012 0.12 x 0.0001 lbF, 50 x 0.05 gF, 0.5 x 0.0005 N, 110V MG025 0.25 x 0.0001 lbF, 100.00 x 0.05 gF, 1 x 0.0005 N, 110V MG05 0.5 x 0.0002 lbF, 250 x 0.1 gF, 2.5 x 0.001 N, 110V MG2 2 x 0.001 lbF, 1 x 0.0005 kgF, 10 x 0.005 N, 110V MG5 5 x 0.002 lbF, 2.5 x 0.001 kgF, 25 x 0.01 N, 110V MG10 10 x 0.005 lbF, 5 x 0.002 kgF, 50 x 0.02 N, 110V MG20 20 x 0.01 lbF, 10 x 0.005 kgF, 100 x 0.05 N, 110V MG50 50 x 0.02 lbF, 25 x 0.01 kgF, 250 x 0.1 N, 110V MG100 100 x 0.05 lbF, 50 x 0.02 kgF, 500 x 0.2 N, 110V MG200 200 x 0.1 lbF, 100 x 0.05 kgF, 1000 x 0.5 N, 110V MG500 500 x 0.2 lbF, 250 x 0.1 kgF, 2500 x 1 N, 110V

For 220V operation, add suffix E to model number. Example: MG100E


ØA 0.200 [5.8] 0.312 [7.9]B 0.19 [4.8] 0.44 [11.2]C 0.35 [8.9] 0.60 [15.2]Thread #10-32 5/16-18

MG012 - MG200 MG500

Economical Digital Force Gauges Series MG32-1044 REV 0

Compact design Portable and flexible in a wide range of applicationsPush-button Simple and quick calibration procedurecalibrationPeak memory For tension and compressionSelectable units Measure in lbF, N, or kg/g (depending onof measurement model)Reversible Housing can be reversed for handheldhousing or test stand use

Features

Data Sheet


High Capacity Digital Force Gauges Series CG32-1045 REV 0

The rugged Series CG Digital Force Gauge is an advanced force measurement instrument for testing up to 1,000 lbF of compressive or tensile forces. The gauge includes all the features of Series BG gauges, including sophisticated measurement capabilities, data outputs, computer control capabilities, and configurable settings.

Specifi cations

Dimensionsin [mm]


Accuracy: ±0.2% of full scale ±1 digitSampling rate: 65 readings/sDisplay rate: 2.5 updates/s in normal operation / 65 updates/s in peak modePower: AC or rechargeable battery with Intelligent Power Management System (IPM). IPM warns the user via a “LO BAT” indicator and then will power off the gauge Battery life: 8-10 hours of continuous useSelectable units of measurement: lbF, kg, NOutputs: Standard RS-232 Fully configurable up to 9600 baud. Includes Gauge Control Language (GCL) for full computer control of all functions. Mitutoyo (Digimatic) Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog ±1 VCD, ±0.25% of full scale at capacity. + for compression, - for tension. General purpose I/O Three open collector outputs and one input (utilizing Mitutoyo lines) Set points Three open collector lines (utilizing Mitutoyo lines)Configurable settings: Analog filters, digital filters, RS-232, outputs selection (other than RS-232), automatic output (RS-232), automatic shutoff, initial (default), averaging mode, calibrationLoad cell deflection: 0.010 in [0.25 mm] at full capacitySafe overload: 150% of full scale (display shows “----” at 110% and above)Weight (gauge only): 1.8 lb [0.8 kg]Environmental requirements: 40° F - 100°F [5°C - 45°C], <96% humidity (non-condensating)Thermal effects: Zero: 0.03% of full scale/°C, Span: 0.01% of full scale/°CHousing construction: AluminumIncluded accessories: Chisel, cone, V-groove, hook, flat, extension, thread adapterWarranty 3 years (see individual statement for further details)

For 220V operation, add suffix E to model number. Example: CG1000E

CG500 500.0 x 0.2 lbF, 250.0 x 0.1 kgF, 2500 x 1 N, 100V CG1000 1000.0 x 0.5 lbF, 500.0 x 0.2 kgF, 5000 x 2 N, 100V

Output cables Various data output cables are availableHi / lo limits indicator Set limit conditions for a test - the indicator will display red lights for high and low 11-1022 limits, and a green light to indicate passing. Overload protection module Protects the force gauge against overloads during motorized tests, adjustable from 10 11-1042 - 150% of gauge’s full capacity. For use with the ESM motorized test stand. Set point cable Stops test stand travel at programmable high and low set points for tension and 09-1090 compression forces. For use with motorized test stands.


Optional Equipment

Data outputs RS-232, Mitutoyo (Digimatic), and analog outputs. Automatic timed output (RS-232) included.Set points Programmable high and low force set points for triggering external devices (ex. motorized test stand, alarm, etc).Data averaging Calculates average force over a specified time (programmable)External trigger Useful for contact or switch activation force testing and data captureReversible Housing can be reversed for handheld or housing test stand use

Features

Data Sheet


Economical Digital Torque Gauges Series MGT32-1046 REV 0

The MGT Torque Gauge is an economical solution for most basic torque measure-ment applications. A dedicated remote torque sensor with a Jacobs chuck can be used to grip a sample, bit, or fixture. The gauge’s rugged reversible aluminum housing allows for hand-held use or test stand mounting. Three pushbuttons allow the user to easily select units of measurement, reset zero, and recall clockwise and counterclockwise peak torque values. The MGT is compatible with Mark-10 torque test stands, and is available in capacities from 10 ozFin to 100 lbFin.

Specifi cations


Accuracy: ±0.5% of full scale ±1 digitSampling rate: 30 readings/sDisplay rate: 2.5 updates/s in normal operation / 30 updates/s in peak modePower: AC or non-rechargeable battery, with Intelligent Power Management System (IPM). IPM warns the user via a “LO BAT” indicator and then will power off the gauge. Battery life: 30 hours of continuous useSelectable units of measurement: lbFin/ozFin, kgFmm, Ncm (depending on model)Safe overload: 150% of full scale (display shows “----” at 110% and above)Weight: 1.8 lb [0.8 kg] Environmental requirements: 40° F - 100°F [5°C - 45°C], <96% humidity (non-condensating)Thermal effects: Zero: 0.03% of full scale/°C, Span: 0.01% of full scale/°CHousing construction: AluminumWarranty 3 years (see individual statement for further details)

MGT10Z 10 x 0.01 ozFin, 7 x 0.005 kgFmm, 7 x 0.005 Ncm, 110V MGT20Z 20 x 0.02 ozFin, 14 x 0.01 kgFmm, 14 x 0.01 Ncm, 110V MGT50Z 50 x 0.05 ozFin, 36 x 0.05 kgFmm, 35 x 0.05 Ncm, 110V MGT12 12 x 0.01 lbFin, 140 x 0.1 kgFmm, 135 x 0.1 Ncm, 110V MGT50 50 x 0.05 lbFin, 580 x 0.5 kgFmm, 570 x 0.5 Ncm, 110V MGT100 100 x 0.1 lbFin, 1150 x 1 kgFmm, 1150 x 1 Ncm, 110V

For 220V operation, add suffix E to model number. Example: MGT12E


Compact design Portable and flexible in a wide range of applicationsPush-button Simple and quick calibration procedurecalibrationPeak memory For tension and compressionSelectable units Measure in lbFin/ozFin, kgFmm, or Ncmof measurement (depending on model)Reversible Housing can be reversed for handheldhousing or test stand use

Features

Dimensionsin [mm]

Data Sheet


Series CT cap torque testers present a powerful, yet value priced solution for closure manufacturers, bottlers, food and beverage companies, and others. The tester features a solid aluminum housing and rugged construction for many years of service in labo-ratory or production environments. Adjustable posts effectively grip a broad range of container shapes and sizes, while a set of optional jaws is available as an alternative gripping method. The CT captures peak torque in both clockwise and counterclockwise directions for application and removal measurements.

Specifi cations


Accuracy: ±0.5% of full scale ±1 digitSampling Rate: 30 readings/sDisplay Rate: 2.5 updates/s in normal mode / 30 updates/s in peak modePower: AC or non-rechargeable 9V battery, with Intelligent Power Management System (IPM). IPM warns the user via a “LO BAT” indicator and then will power off the gauge. Battery Life: 30 hours of continuous useSelectable units of measurement: lbFin, kgFmm, NcmSafe overload: 150% of full scale (display shows “----” at 110% and above)Weight: 10 lb [4.5 kg] Environmental Requirements: 40° F - 100°F [5°C - 45°C], <96% humidity (non-condensating)Thermal effects: Zero: 0.03% of full scale/°C, Span: 0.01% of full scale/°CHousing construction: 6061 aluminumWarranty 3 years (see individual statement for further details)

CT12 12 x 0.01 lbFin, 140 x 0.1 kgFmm, 135 x 0.1 Ncm, 110V CT50 50 x 0.05 lbFin, 580 x 0.5 kgFmm, 570 x 0.5 Ncm, 110V CT100 100 x 0.1 lbFin, 1150 x 1 kgFmm, 1150 x 1 Ncm, 110V CT001 Sample gripping jaws, pair CTRS Outputs package for CT (RS-232 and Mitutoyo outputs)

For 220V operation, add suffix E to model number. Example: CT50E


Wide sample Portable and flexible for a wide range of size range applicationsPeak memory For application and removal torqueSelectable units Measure in lbFin, kgFmm, or Ncmof measurementMoveable posts Accommodate a wide range of samplesPush-button Simple and quick calibration procedurecalibration

Features

Dimensionsin [mm]

Sample gripping jaws Set of rubber jaws for gripping CT001 square or odd shape containersData outputs package RS-232 and Mitutoyo (Digimatic)CTRS outputs Output cables Choice of RS-232 and Mitutoyo data output cables are available

Optional Equipment

» Moveable posts » Simple hand operation

» Optional sample gripping jaws

» Optional data outputs package

Digital Cap Torque Testers Series CT32-1059 REV 0

Data Sheet


Series ST Torque Tool Testers present a simple, yet accurate solution for testing torque screwdrivers, wrenches, and other tools. Applications exist in manufacturing facilities in virtually every industry. The ST features a solid aluminum housing, making it rugged enough for many years of service in production or laboratory use, while a universal receptacle with square drive and grooves accepts common bits and attachments. The ST captures peak torque in both clockwise and counterclockwise directions.

Specifi cations


Accuracy: ±0.5% of full scale ±1 digitSampling Rate: 65 readings/sDisplay Rate: 2.5 updates/s in normal mode / 65 updates/s in peak modePower: AC or non-rechargeable 9V battery, with Intelligent Power Management System (IPM). IPM warns the user via a “LO BAT” indicator and then will power off the gauge. Battery Life: 30 hours of continuous useSelectable units of measurement: lbFin, kgFmm, NcmOutputs: Optional RS-232 Fully configurable up to 9600 baud Mitutoyo (Digimatic) Serial BCD suitable for all Mitutoyo SPC-compatible devicesSafe overload: 150% of full scale (display shows “----” at 110% and above)Weight: 4.8 lb [2.2 kg] Environmental Requirements: 40° F - 100°F [5°C - 45°C], <96% humidity (non-condensating)Thermal effects: Zero: 0.03% of full scale/°C, Span: 0.01% of full scale/°CHousing construction: AluminumWarranty 3 years (see individual statement for further details)

ST12 12 x 0.01 lbFin, 140 x 0.1 kgFmm, 135 x 0.1 Ncm, 110V ST50 50 x 0.05 lbFin, 580 x 0.5 kgFmm, 570 x 0.5 Ncm, 110V ST100 100 x 0.1 lbFin, 1150 x 1 kgFmm, 1150 x 1 Ncm, 110V ST001 Bench mounting bracket for ST

For 220V operation, add suffix E to model number. Example: ST50E


Universal Accepts many types of torque toolsreceptacle and fixturesPeak memory For clockwise and counterclockwise torqueSelectable units Measure in lbFin, kgFmm, or Ncmof measurementData outputs RS-232 and Mitutoyo (Digimatic)Push-button Simple and quick calibration procedurecalibration

Features

Dimensionsin [mm]

Bench mounting bracket Allows the ST to be mounted ST001 securely on a bench. Output cables Choice of RS-232 and Mitutoyo data output cables are available

Optional Equipment

Optional bench mounting bracket

Simply place the torque tool into the universal receptacle and twist. The readout will show the torque value in the clockwise or counterclockwise direction.

Digital Torque Tool Testers Series ST32-1063 REV 0

data sheet premium digital force gauges series bg · 2020. 7. 22. · data sheet mark-10...

Documents