Manual screwdrivers with DC driven nutrunner motors • with DIRECT CONTROL (torque/angle control) • with INDIRECT CONTROL (current control)
2
Handheld tightening solutions to guarantee high quality assembled product.
Controller and feeding unit TCS-B E • It includes electronic feeding to the
motors, programming and control of each stage of tightening cycle
Multifunction Panel • Programs selection (4 or 8 depending on
which TCS-B E model it is paired with) • Managing untightening operations • Connections with pallet lock/release/led
signal tower/Socket Program Selector/ Enable/On Off)
• 5 indicator LEDs: OK, NOK, RUN, OUT1, OUT2 2 memory statuses • Bracket for fastening to the cartesian arm
An ideal solution for all industrial fields, from automotive to aerospace, from household appliances to electromechanical engineering, delivering numerous benefits throughout the manufacturing process: a high level of flexibility in tightening, easy integration into existing production lines, traceability of all assembly job data and lower production costs thanks to rejects reduction.
Manual screwdrivers with DC driven nutrunner motors
3
Brushless electronic screwdriver • 10 models up to 35 Nm • Hung to a cartesian arm • Equipped with straight grip with lever start • Carter protecting the user from motor
generated heat • Two type of motors:
BC cartesian arm • To be positioned on the workbench • It supports the screwdriver, helps maintaining
tool orthogonal position • Maximum ergonomics of the workplace: no
effort and no torque reaction on the operator's wrist
WITH DIRECT CONTROL
Equipped with an electronic transducer to read the torque applied to the screw; while the angle is read directly by appropriate sensors
WITH INDIRECT CONTROL
(current control) The torque parameters are achieved by measuring the current absorbed; the angle parameters are achieved by appropriate sensors
Cables Kit • Cables kit 4,5 mt-long to
connect the motor to the multifunction panel and TCS-B E unit
• All cables are shielded • They are supplied within
a sheath containing the cables with the aim to reduce dimensions and optimizing workbench layout
Manual screwdrivers with DC driven nutrunner motors
4 Manual screwdrivers with DC driven nutrunner motors
5 strategies: it is possible to choose between screw drive-engagement, torque, torque/angle, angle/torque, loosening. 5 programmable modalities, to guarantee reliability and working speed.
Optical outcomes visualization for an immediate understanding through OK, NOK, RUN leds.
Wide connectivity: 5 inputs and 5 outputs for connection to signal tower light or external devices; they control and assure working continuity. RS232 connection for programming, diagnostics and data collection
Software is supplied with standard equipment, for a simple and intuitive programming, with clear and complete instructions to set and manage the tightening strategy
TCS-B E (Tightening Control System - Basic - Evolution) are innovative and compact units that include electronic feeding to the motors, programming and control of each stage of tightening cycle. They control both current control and torque/angle nutrunner motors.
System Display
“Accessory release” sequence: programmable instruction to be used when the accessory and/ or screw drive collapse preventing release of screw/accessory, thus stop the working cycle. Therefore it guarantees operating continuity and high productivity in the automatic working cycles.
“Plug&Play“ system: automatic adjustment of torque transducer signal (for torque/angle control systems)
Working test (inputs and outputs work, motor speed, motor connection control, feeding tension and temperature values)
Controller and feeding unit TCS-B E: the intelligent simplicity
5Manual screwdrivers with DC driven nutrunner motors
TCS-B E
TOUCH PANEL
EXTERNAL STORAGE KIT
Legend
15 = Power of the screwdriver/10 • CB = Brushless electronic screwdriver • 05 = Maximum torque in Nm • C = Indirect control (current control) • L = Lever start
Model
15CB05CL
15CB10CL
15CB20CL
25CB20CL
25CB35CL
3/8”
3/8”
3/8”
1/2”
1/2”
1700
700
350
1500
700
15 = Power of the screwdriver/10 • CB = Brushless electronic screwdriver • 05 = Maximum torque in Nm • A = Torque/angle control • L = Lever start
Legend
Model
15CB05AL
15CB10AL
15CB20AL
25CB20AL
25CB35AL
Re ve
rs ib
ili ty
St ar
tin g
sy st
Reversibility: All models are suitable for tightening and untightening operation
Legend
• Test certificate • Use and maintenance manual • Eco-friendly packaging
• Noise level has been measured in accordance with ISO 3744 and ISO 15744 standards (inf. to 72 dBA)
• Accessory drive: male square drive in accordance with ISO 1174-1; hex. female 6,35 mm (ISO 1173)
• The code number must be used when ordering • DC electronic nutrunners precision is influenced by
the speed, the type of joint and the type of accessory used
They are in compliance with ECC Directive 2004/108 - ESD compatibility
Torque values refer to analysis of laboratory performing tests that comply with the standard ISO 5393 with screwdriver set at to the maximum speed and should be considered as indicative. The values in real applications can be influenced by many factors such as, for example: joint (type of joint, degree of elasticity), screw (type and length), accessory used (type or length of the blade), tightening speed, assembly conditions (free standing screwdriver, screwdriver mounted on a torque arm), operator behavior during the tightening phase. For any further details, please address to Fiam Technical Service.
Screwdrivers with INDIRECT control
Screwdrivers with DIRECT control
* Models available upon request
*
*
*
*
Model
SPS - Socket Program Selector
• 4 programs each model
• 8 programs each model
Code
654141010
687010053
686010018
686010019
15CB...
25CB...
Supplied with 4 programs, programming software, quick guide. Addition of 4 more programs is available upon request: cod. 686200904
SPS - Socket Program Selector
en .
How to order a screwdriver powered by brushless electronic motor Complete the following form and send it by fax +39 0444 385002 or by e-mail orders@fiamgroup.com. For information about the following form or other technical information, contact Fiam Technical Advice service.
CHOOSING THE STANDARD EQUIPMENT
15CB05CL cod. 111618140
15CB10CL cod. 111618141
15CB20CL cod. 111618142
15CB05AL cod. 111618150
15CB10AL cod. 111618151
15CB20AL cod. 111618152
25CB20CL upon request
25CB35CL upon request
25CB20AL upon request
25CB35AL upon request
Type of screwdriver
SPS - Socket Program Selector
Predisposition for pallets release
Cartesian arm
TCS-B15E cod. 686200320
cod. 686200904
*It is not possible to upgrade it from 4 to 8 programs after purchase
Quality Management System Certificate
Environmental Management System Certificate
www.fiamgroup.com info@fiamgroup.com
Fiam Utensili Pneumatici Spa Viale Crispi 123 36100 Vicenza - Italy Tel. +39.0444.385000 Fax +39.0444.385002
Fiam France Succursale 73, cours Albert Thomas 69003 Lyon - France Tel. +33 (0)9 70 40 73 85
Fiam España Sucursal Travessera de Gràcia, 11, 5ª planta 08021 Barcelona, España Tel. +34.636808112
Meet us on: