contract drawings state of connecticut
TRANSCRIPT
CONTRACT DRAWINGS
STATE OF CONNECTICUT
NED LAMONT, GOVERNOR
JUDICIAL BRANCH
ENGINEER
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
BUILDING CODE INFORMATION
LOCATION PLAN
ISSUED FOR BID
172 GOLDEN HILL STREET
BRIDGEPORT, CT 06604
MARCH, 2020
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
AutoCAD SHX Text
25183-242340
AutoCAD SHX Text
4000
AutoCAD SHX Text
2000
AutoCAD SHX Text
1000
AutoCAD SHX Text
2000
AutoCAD SHX Text
0
AutoCAD SHX Text
SCALE IN FEET
AutoCAD SHX Text
HON. RICHARD A. ROBINSON CHIEF JUSTICE
AutoCAD SHX Text
HON. PATRICK L. CARROLL III CHIEF COURT ADMINISTRATOR
AutoCAD SHX Text
SHEET TITLE TITLE H-001 - LEGEND, SYMBOLS, AND ABBREVIATIONS H-100 - BASEMENT PLAN H-101 - FIRST FLOOR PLAN H-102 - SECOND FLOOR PLAN H-103 - THIRD FLOOR PLAN H-104 - ATTIC PLAN H-105 - ROOF PLAN H-700 - PROCESS AND INSTRUMENTATION DIAGRAM - AHU-1 H-701 - PROCESS AND INSTRUMENTATION DIAGRAM - AHU-2 H-702 - PROCESS AND INSTRUMENTATION DIAGRAM - AC-1 & AC-5 H-703 - PROCESS AND INSTRUMENTATION DIAGRAM - CHILLED WATER SYSTEM H-704 - PROCESS AND INSTRUMENTATION DIAGRAM - CONDENSER WATER SYSTEM H-705 - PROCESS AND INSTRUMENTATION DIAGRAM - HEATING HOT WATER SYSTEM H-706 - NETWORK RISER DIAGRAM
AutoCAD SHX Text
AGENCY
AutoCAD SHX Text
APPROVALS
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DATE
AutoCAD SHX Text
SCOPE OF WORK THE WORK SPECIFIED IN THIS PROJECT CONTAINS THE REMOVAL AND REPLACEMENT OF BUILDING AUTOMATION CONTROLLERS FOR THE MECHANICAL EQUIPMENT.
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2020
LEGEND, ABBREVIATIONS
AND NOTES
A
SYMBOLSSYMBOLS
FLOW STREAM CODE
PIPE MATERIAL CODES
GENERAL ABBREVIATIONS
I
W
S
R
P
O
N
D
C
V
U
T
M
K
H
G
F
E
B
SYMBOLS
GENERAL NOTES:
L
FIELD INSTRUMENT LEGEND
PANEL LEGEND
AUTOMATIC TEMPERATURE CONTROL SYSTEM NOTES.
H-001
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H001CHLA.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
AV
AutoCAD SHX Text
DIAPHRAGM VALVE
AutoCAD SHX Text
NEEDLE VALVE
AutoCAD SHX Text
3-WAY VALVE (OPEN AND CLOSE)
AutoCAD SHX Text
FLOW METER
AutoCAD SHX Text
PA
AutoCAD SHX Text
VOLTS
AutoCAD SHX Text
VARIABLE AIR VOLUME
AutoCAD SHX Text
VELOCITY
AutoCAD SHX Text
WITH
AutoCAD SHX Text
WITHOUT
AutoCAD SHX Text
WET BULB
AutoCAD SHX Text
HEAT TRANSFER COEFFICIENT
AutoCAD SHX Text
UNIT HEATER
AutoCAD SHX Text
UNDERWRITERS LABORATORY
AutoCAD SHX Text
TEMPERATURE DIFFERENCE
AutoCAD SHX Text
TOP OF STEEL
AutoCAD SHX Text
OUTSIDE AIR
AutoCAD SHX Text
ON CENTER
AutoCAD SHX Text
OUTSIDE DIAMETER
AutoCAD SHX Text
OPEN ENDED DAMPER
AutoCAD SHX Text
NORMALLY CLOSED
AutoCAD SHX Text
NORMALLY OPEN
AutoCAD SHX Text
NOMINAL
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
AMERICAN NATIONAL TAPER
AutoCAD SHX Text
MOTOR
AutoCAD SHX Text
THOUSAND BTU PER HOUR
AutoCAD SHX Text
MATERIAL
AutoCAD SHX Text
MAKEUP AIR UNIT
AutoCAD SHX Text
MOTOR CONTROL CENTER
AutoCAD SHX Text
MECHANICAL
AutoCAD SHX Text
MANUFACTURER
AutoCAD SHX Text
MINIMUM
AutoCAD SHX Text
MISCELLANEOUS
AutoCAD SHX Text
MOUNTED
AutoCAD SHX Text
KILOWATT
AutoCAD SHX Text
INSTRUMENT(ATION)
AutoCAD SHX Text
INSULATE,INSULATION
AutoCAD SHX Text
INSIDE DIAMETER
AutoCAD SHX Text
HOT WATER PUMP
AutoCAD SHX Text
FARENHEIT
AutoCAD SHX Text
FAN COIL UNIT
AutoCAD SHX Text
GALLONS PER MINUTE
AutoCAD SHX Text
FIRE DAMPER
AutoCAD SHX Text
EXHAUST AIR
AutoCAD SHX Text
ELECTRICAL
AutoCAD SHX Text
ELEVATION
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
EXHAUST
AutoCAD SHX Text
AUTOMATIC AIR RELEASE VENT
AutoCAD SHX Text
AVERAGE
AutoCAD SHX Text
AUXILIARY
AutoCAD SHX Text
AUTOMATIC
AutoCAD SHX Text
AUTOMATIC TEMPERATURE
AutoCAD SHX Text
ACCESS PANEL
AutoCAD SHX Text
ALTITUDE
AutoCAD SHX Text
AIR HANDLING UNIT
AutoCAD SHX Text
ABOVE GRADE
AutoCAD SHX Text
ABOVE FINISHED FLOOR
AutoCAD SHX Text
AIR CONDITIONER UNIT
AutoCAD SHX Text
AIR CONDITIONER
AutoCAD SHX Text
REFRIGERANT-HOT GAS
AutoCAD SHX Text
RG
AutoCAD SHX Text
HEATING AND VENTILATING
AutoCAD SHX Text
HORSEPOWER
AutoCAD SHX Text
FEET PER MINUTE
AutoCAD SHX Text
FLAT ON TOP
AutoCAD SHX Text
FLAT ON BOTTOM
AutoCAD SHX Text
FLANGE
AutoCAD SHX Text
FLOOR
AutoCAD SHX Text
FLR
AutoCAD SHX Text
THERMAL EXPANSION VALVE
AutoCAD SHX Text
TXV
AutoCAD SHX Text
DIRECT EXPANSION COIL
AutoCAD SHX Text
DX
AutoCAD SHX Text
AD
AutoCAD SHX Text
SUPPLY FAN
AutoCAD SHX Text
GATE VALVE (NC) WITH HOSE CONNECTOR
AutoCAD SHX Text
SF
AutoCAD SHX Text
TO DRAIN (NEAREST)
AutoCAD SHX Text
D
AutoCAD SHX Text
AIR COOLED CHILLER
AutoCAD SHX Text
CHIL
AutoCAD SHX Text
CHILLED WTR GLYCOL PUMP
AutoCAD SHX Text
CGP
AutoCAD SHX Text
ACU
AutoCAD SHX Text
AV
AutoCAD SHX Text
ACCESS DOOR
AutoCAD SHX Text
AC
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text
ATC
AutoCAD SHX Text
AVG
AutoCAD SHX Text
AUX
AutoCAD SHX Text
AUTO
AutoCAD SHX Text
AP
AutoCAD SHX Text
ALT
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AG
AutoCAD SHX Text
AFF
AutoCAD SHX Text
FLOW BALANCE & SHUTOFF VALVE
AutoCAD SHX Text
FBV
AutoCAD SHX Text
FEET
AutoCAD SHX Text
FT
AutoCAD SHX Text
TRIPLE DUTY VALVE
AutoCAD SHX Text
TRANSFER FAN
AutoCAD SHX Text
TF
AutoCAD SHX Text
AUTOMATIC AIR RELEASE VENT
AutoCAD SHX Text
WALL GRILLE
AutoCAD SHX Text
WG
AutoCAD SHX Text
HAND-OFF-AUTO
AutoCAD SHX Text
H-O-A
AutoCAD SHX Text
FLOW SENSOR
AutoCAD SHX Text
FIRE DAMPER
AutoCAD SHX Text
FS
AutoCAD SHX Text
FD
AutoCAD SHX Text
FLOOR GRILLE
AutoCAD SHX Text
FG
AutoCAD SHX Text
FD
AutoCAD SHX Text
ENTERING WATER TEMPERATURE
AutoCAD SHX Text
EWT
AutoCAD SHX Text
ELECTRIC UNIT HEATER
AutoCAD SHX Text
EUH
AutoCAD SHX Text
DOOR GRILLE
AutoCAD SHX Text
DG
AutoCAD SHX Text
BOTTOM OF DUCT
AutoCAD SHX Text
BOTTOM OF PIPE
AutoCAD SHX Text
BOP
AutoCAD SHX Text
BOD
AutoCAD SHX Text
2-WAY VALVE (OPEN AND CLOSE)
AutoCAD SHX Text
ELBOW DOWN
AutoCAD SHX Text
TEE DOWN
AutoCAD SHX Text
TEE UP
AutoCAD SHX Text
DRAWING
AutoCAD SHX Text
DOWN
AutoCAD SHX Text
DRY BULB/DEWATERING BUILDING
AutoCAD SHX Text
CLOCKWISE
AutoCAD SHX Text
CW
AutoCAD SHX Text
VALVE FLOW COEFFICIENT
AutoCAD SHX Text
CV
AutoCAD SHX Text
CENTER
AutoCAD SHX Text
CTR
AutoCAD SHX Text
CENTER OF PIPE
AutoCAD SHX Text
COP
AutoCAD SHX Text
CLEAR
AutoCAD SHX Text
CLR
AutoCAD SHX Text
CEILING
AutoCAD SHX Text
CLG
AutoCAD SHX Text
CENTER LINE
AutoCAD SHX Text
CL
AutoCAD SHX Text
CUBIC FEET PER MINUTE
AutoCAD SHX Text
CFM
AutoCAD SHX Text
CENTRIFUGAL
AutoCAD SHX Text
CENT
AutoCAD SHX Text
COUNTER CLOCKWISE
AutoCAD SHX Text
CCW
AutoCAD SHX Text
CENTER TO CENTER
AutoCAD SHX Text
C TO C
AutoCAD SHX Text
BRITISH THERMAL UNIT
AutoCAD SHX Text
BTU
AutoCAD SHX Text
BOTTOM
AutoCAD SHX Text
BOT
AutoCAD SHX Text
BRAKE HORSEPOWER
AutoCAD SHX Text
BHP
AutoCAD SHX Text
BACK TO BACK
AutoCAD SHX Text
B TO B
AutoCAD SHX Text
PSI GUAGE
AutoCAD SHX Text
PSIG
AutoCAD SHX Text
PSI ABSOLUTE
AutoCAD SHX Text
PSIA
AutoCAD SHX Text
POUNDS PER SQUARE IN
AutoCAD SHX Text
PSI
AutoCAD SHX Text
REDUCER
AutoCAD SHX Text
RED
AutoCAD SHX Text
REVOLUTIONS PER MINUTE
AutoCAD SHX Text
RPM
AutoCAD SHX Text
RE-HEAT
AutoCAD SHX Text
RH
AutoCAD SHX Text
ROOF FAN
AutoCAD SHX Text
RF
AutoCAD SHX Text
RETURN AIR
AutoCAD SHX Text
RA
AutoCAD SHX Text
%%uPIPE FITTINGS
AutoCAD SHX Text
%%uVALVES
AutoCAD SHX Text
STRAIGHT INVERT
AutoCAD SHX Text
%%uSPECIALTIES
AutoCAD SHX Text
REFRIGERANT LIQUID
AutoCAD SHX Text
RL
AutoCAD SHX Text
REFRIGERANT SUPPLY
AutoCAD SHX Text
RS
AutoCAD SHX Text
DRAIN
AutoCAD SHX Text
D
AutoCAD SHX Text
TEMPERATURE
AutoCAD SHX Text
TEMP
AutoCAD SHX Text
STAINLESS STEEL
AutoCAD SHX Text
SS
AutoCAD SHX Text
SPECIFICATION
AutoCAD SHX Text
SPEC
AutoCAD SHX Text
STATIC PRESSURE
AutoCAD SHX Text
SP
AutoCAD SHX Text
SCHEDULE
AutoCAD SHX Text
SCH
AutoCAD SHX Text
SUPPLY AIR
AutoCAD SHX Text
SA
AutoCAD SHX Text
TOP CONNECTION
AutoCAD SHX Text
ANCHOR
AutoCAD SHX Text
ALIGNMENT GUIDE
AutoCAD SHX Text
UNION-FLANGED
AutoCAD SHX Text
UNION-SCREWED
AutoCAD SHX Text
TEE
AutoCAD SHX Text
STRAIGHT CROWN
AutoCAD SHX Text
REDUCER-ECCENTRIC
AutoCAD SHX Text
REDUCER-ECCENTRIC
AutoCAD SHX Text
REDUCER-CONCENTRIC
AutoCAD SHX Text
ELBOW UP
AutoCAD SHX Text
BOTTOM CONNECTION
AutoCAD SHX Text
CAP
AutoCAD SHX Text
NPT
AutoCAD SHX Text
PIPE THREAD
AutoCAD SHX Text
(SELF CONTAINED)
AutoCAD SHX Text
PRESSURE CONTROL VALVE
AutoCAD SHX Text
CHECK VALVE, GENERAL SYMBOL
AutoCAD SHX Text
PLUG VALVE
AutoCAD SHX Text
BUTTERFLY VALVE
AutoCAD SHX Text
BALL VALVE
AutoCAD SHX Text
GLOBE VALVE
AutoCAD SHX Text
DRAWINGS ADJACENT TO SYMBOL
AutoCAD SHX Text
UNCLASSIFIED. TYPE AS SHOWN ON THE
AutoCAD SHX Text
GATE VALVE
AutoCAD SHX Text
AL24-4C (CAT IV VENT PIPE)
AutoCAD SHX Text
POLYVINYL CHLORIDE
AutoCAD SHX Text
GALVANIZED STEEL
AutoCAD SHX Text
COPPER
AutoCAD SHX Text
SS
AutoCAD SHX Text
PVC
AutoCAD SHX Text
GS
AutoCAD SHX Text
CU
AutoCAD SHX Text
AIR CONDITIONING
AutoCAD SHX Text
HEATING, VENTILATING AND
AutoCAD SHX Text
HVAC
AutoCAD SHX Text
WB
AutoCAD SHX Text
W/O
AutoCAD SHX Text
W/
AutoCAD SHX Text
VEL
AutoCAD SHX Text
VAV
AutoCAD SHX Text
V
AutoCAD SHX Text
UL
AutoCAD SHX Text
UH
AutoCAD SHX Text
U
AutoCAD SHX Text
OED
AutoCAD SHX Text
OD
AutoCAD SHX Text
OC
AutoCAD SHX Text
OA
AutoCAD SHX Text
NTS
AutoCAD SHX Text
NOM
AutoCAD SHX Text
NO
AutoCAD SHX Text
NC
AutoCAD SHX Text
MTD
AutoCAD SHX Text
MISC
AutoCAD SHX Text
MIN
AutoCAD SHX Text
MFR
AutoCAD SHX Text
MECH
AutoCAD SHX Text
MCC
AutoCAD SHX Text
MAU
AutoCAD SHX Text
MATL
AutoCAD SHX Text
MBH
AutoCAD SHX Text
M
AutoCAD SHX Text
KW
AutoCAD SHX Text
INSTR
AutoCAD SHX Text
INS
AutoCAD SHX Text
ID
AutoCAD SHX Text
HWP
AutoCAD SHX Text
H&V
AutoCAD SHX Text
HP
AutoCAD SHX Text
GPM
AutoCAD SHX Text
FPM
AutoCAD SHX Text
FOT
AutoCAD SHX Text
FOB
AutoCAD SHX Text
FLG
AutoCAD SHX Text
FC
AutoCAD SHX Text
F
AutoCAD SHX Text
EXH
AutoCAD SHX Text
EMERG
AutoCAD SHX Text
EL
AutoCAD SHX Text
ELEC
AutoCAD SHX Text
EA
AutoCAD SHX Text
DWG
AutoCAD SHX Text
DN
AutoCAD SHX Text
DISCHARGE
AutoCAD SHX Text
DISCH
AutoCAD SHX Text
DIAMETER
AutoCAD SHX Text
DIA
AutoCAD SHX Text
DB
AutoCAD SHX Text
TOS
AutoCAD SHX Text
TD
AutoCAD SHX Text
%%UGENERAL
AutoCAD SHX Text
DEMOLITION
AutoCAD SHX Text
AIR SEPERATOR
AutoCAD SHX Text
AS
AutoCAD SHX Text
BOILER PUMP
AutoCAD SHX Text
BP
AutoCAD SHX Text
CHILLED GLYCOL SUPPLY
AutoCAD SHX Text
CGS
AutoCAD SHX Text
CHILLED GLYCOL RETURN
AutoCAD SHX Text
CGR
AutoCAD SHX Text
CONDENSING UNIT
AutoCAD SHX Text
CU
AutoCAD SHX Text
CABINET HEATER
AutoCAD SHX Text
CH
AutoCAD SHX Text
ENERGY EFFICIENCY RATIO
AutoCAD SHX Text
EER
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
EF
AutoCAD SHX Text
EXTERNAL STATIC PRESSURE
AutoCAD SHX Text
ESP
AutoCAD SHX Text
EXPANSION TANK
AutoCAD SHX Text
ET
AutoCAD SHX Text
ENTERING AIR TEMPERATURE
AutoCAD SHX Text
EAT
AutoCAD SHX Text
REGISTER
AutoCAD SHX Text
REG
AutoCAD SHX Text
HERTZ
AutoCAD SHX Text
HZ
AutoCAD SHX Text
SEASONAL ENERGY EFFICIENCY RATIO
AutoCAD SHX Text
SEER
AutoCAD SHX Text
TYPICAL
AutoCAD SHX Text
TYP
AutoCAD SHX Text
TONNAGE OF REFRIGERATION
AutoCAD SHX Text
TR
AutoCAD SHX Text
TOTALLY ENCLOSED FAN COOLED
AutoCAD SHX Text
TEFC
AutoCAD SHX Text
WIRE MESH SCREEN
AutoCAD SHX Text
WMS
AutoCAD SHX Text
1. HVAC EQUIPMENT LOCATIONS, DUCTWORK, AND PIPING SYSTEM LAYOUTS HVAC EQUIPMENT LOCATIONS, DUCTWORK, AND PIPING SYSTEM LAYOUTS ARE BASED ON EQUIPMENT SELECTED BY THE ENGINEER. IF THE CONTRACTOR PROPOSES TO FURNISH EQUIPMENT OF DIFFERENT SIZE, OR EQUIPMENT THAT REQUIRES AN ARRANGEMENT OR SPACE DIFFERING FROM THAT INDICATED ON THE DRAWINGS OR SPECIFIED, THE CONTRACTOR SHALL PREPARE AND SUBMIT TO THE ENGINEER FOR APPROVAL, DETAILED ARCHITECTURAL, STRUCTURAL, MECHANICAL, PLUMBING, INSTRUMENTATION, HVAC, AND ELECTRICAL DRAWINGS AND EQUIPMENT SPECIFICATION SHEETS. THE SUBMITTALS SHALL SHOW ALL NECESSARY CHANGES AND INDICATE ALL FEATURES OF THE EQUIPMENT THE CONTRACTOR PROPOSES. THE DRAWINGS SHALL INCLUDE BUT NOT BE LIMITED TO PLANS, SECTIONS, DETAILS, AND SCHEMATICS OF ALL APPURTENANCES REQUIRED. DEVIATIONS FROM THE EQUIPMENT SPECIFIED AND SHOWN ON THE CONSTRUCTION DRAWINGS AND IN THE SPECIFICATIONS SHALL BE CLEARLY INDICATED. CHANGES SHALL BE APPROVED BY THE ENGINEER PRIOR TO PROCEEDING WITH THE WORK AND SHALL BE MADE AT NO EXTRA COST TO THE OWNER. THE CONTRACTOR SHALL ASSUME THE COST OF, AND THE RESPONSIBILITY FOR SATISFACTORY ACCOMPLISHING ALL OF THE CHANGES AND THE FINAL OPERATION OF THE EQUIPMENT IN ACCORDANCE WITH THE CONSTRUCTION DOCUMENTS. 2. PROVIDE DIELECTRIC COUPLINGS AT PIPING CONNECTIONS BETWEEN PROVIDE DIELECTRIC COUPLINGS AT PIPING CONNECTIONS BETWEEN DISSIMILAR PIPING MATERIALS. 3. PIPE HANGERS SUPPORTING COPPER PIPING SHALL BE CONSTRUCTED OF PIPE HANGERS SUPPORTING COPPER PIPING SHALL BE CONSTRUCTED OF COPPER OR OTHER COPPER COMPATIBLE MATERIAL 4. SOLDER CONTAINING LEAD IS NOT PERMITTED AND SHALL NOT BE SOLDER CONTAINING LEAD IS NOT PERMITTED AND SHALL NOT BE BROUGHT ONTO THE CONSTRUCTION SITE. 5. HVAC PIPING AND DUCTWORK DRAWINGS DO NOT SHOW ALL DRAINS, HVAC PIPING AND DUCTWORK DRAWINGS DO NOT SHOW ALL DRAINS, VENTS, OFFSETS AND FITTINGS ETC. REQUIRED FOR THE COMPLETE SYSTEM. SUCH ITEMS SHALL BE PROVIDED AS CALLED FOR ON THE DETAILS AND IN THE SPECIFICATIONS. 6. SMALL PIPING IS SHOWN APPROXIMATELY TO SCALE BUT NOT EVERY SMALL PIPING IS SHOWN APPROXIMATELY TO SCALE BUT NOT EVERY FITTING AND OFFSET IS SHOWN. SOME VALVES AND APPURTENANCES MAY BE OMITTED FOR THE SAKE OF CLARITY. THE CONTRACTOR SHALL FURNISH AND INSTALL ALL SUCH ITEMS WHETHER SHOWN OR NOT SHOWN. 7. ALL PIPING PENETRATING OR IN CONTACT WITH CONCRETE, MASONRY, OR ALL PIPING PENETRATING OR IN CONTACT WITH CONCRETE, MASONRY, OR ANY OTHER CORROSIVE MATERIAL SHALL BE SLEEVED AS SPECIFIED OR DETAILED. 8. UNLESS SPECIFIC REQUIREMENTS ARE SHOWN ON THE DRAWINGS ALL UNLESS SPECIFIC REQUIREMENTS ARE SHOWN ON THE DRAWINGS ALL FLOOR SLAB AND WALL PENETRATIONS SHALL BE AS SHOWN ON THE DETAILS. ABOVE GROUND EXTERIOR WALL AND ROOF PENETRATIONS SHALL BE AS SHOWN ON THE ARCHITECTURAL DRAWINGS. ALTERNATE DETAILS SHALL BE SUBMITTED TO THE ENGINEER FOR APPROVAL. THE ENGINEER'S APPROVAL SHALL BE RECEIVED PRIOR TO STARTING THE WORK. 9. ALL DUCTWORK SHALL BE INSTALLED PARALLEL OR PERPENDICULAR TO ALL DUCTWORK SHALL BE INSTALLED PARALLEL OR PERPENDICULAR TO THE BUILDING WALLS AND FLOOR. 10. ALL PIPING SHALL BE INSTALLED PARALLEL OR PERPENDICULAR TO THE ALL PIPING SHALL BE INSTALLED PARALLEL OR PERPENDICULAR TO THE BUILDING WALLS AND FLOOR. 11. NOT ALL SUPPORTS ARE SHOWN ON THE DRAWINGS. UNLESS OTHERWISE NOT ALL SUPPORTS ARE SHOWN ON THE DRAWINGS. UNLESS OTHERWISE DETAILED ON THE DRAWINGS ALL PIPE AND DUCT SUPPORTS SHALL BE DESIGNED, FURNISHED AND INSTALLED BY THE CONTRACTOR. 12. WHERE THE WORK IS A MODIFICATION OF EXISTING SYSTEMS OR WHERE THE WORK IS A MODIFICATION OF EXISTING SYSTEMS OR STRUCTURES, THE CONTRACTOR SHALL BE RESPONSIBLE FOR CONFIRMATION OF THE EXISTING DIMENSIONS, CONFIGURATION AND CONSTRUCTION OF EXISTING ELEMENTS. THE CONTRACTOR SHALL BE RESPONSIBLE FOR COORDINATION WITH THE EXISTING ELEMENTS. THE CONTRACTOR SHALL VISIT THE SITE PRIOR TO BIDDING THE WORK. ANY DEVIATIONS FROM THE DRAWINGS MUST BE PRESENTED PRIOR TO BID SUBMISSION FOR CLARIFICATION. 13. CONTRACTOR SHALL BE RESPONSIBLE FOR REMOVAL OF ALL CONTRACTOR SHALL BE RESPONSIBLE FOR REMOVAL OF ALL MISCELLANEOUS CONTROL WIRING, HANGERS, CONDUITS, FITTINGS AND OTHER ACCESSORIES ASSOCIATED WITH DEMOLITION WORK. 14. THE CONTRACTOR SHALL PROVIDE A CONSTRUCTION SCHEDULE. THE CONTRACTOR SHALL PROVIDE A CONSTRUCTION SCHEDULE. 15. ALL WORK, INCLUDING BUILDING SERVICES AND UTILITY SHUTDOWNS, SHALL ALL WORK, INCLUDING BUILDING SERVICES AND UTILITY SHUTDOWNS, SHALL BE COORDINATED AND SCHEDULED WITH THE OWNER PRIOR TO BEGINNING CONSTRUCTION. 16. THE CONTRACTOR SHALL REMOVE CONSTRUCTION DEBRIS AND ALL OTHER THE CONTRACTOR SHALL REMOVE CONSTRUCTION DEBRIS AND ALL OTHER DEBRIS MADE DURING THE WORK THEY HAVE COMPLETED, AT THE END OF EACH WORK DAY. 17. THE CONTRACTOR SHALL REPAIR OR REPLACE ANY DAMAGED EQUIPMENT, THE CONTRACTOR SHALL REPAIR OR REPLACE ANY DAMAGED EQUIPMENT, CEILING, WALLS, ETC. WHICH HAVE BEEN DAMAGED BY THE WORK OF THIS PROJECT AT NO COST TO THE OWNER. 18. NOTED ELEVATIONS ARE GIVEN AS REFERENCE FOR THE INTENDED ROUTING NOTED ELEVATIONS ARE GIVEN AS REFERENCE FOR THE INTENDED ROUTING OF SYSTEMS. THE CONTRACTOR SHALL COORDINATE THE EXACT ROUTING. ALL WORK SHALL BE INSTALLED WITH THE PROPER PITCH. COORDINATE WITH OTHER TRADES AND FIELD CONDITIONS TO AVOID INTERFERENCES. 19. COORDINATE ALL MOTOR SIZES, STARTERS, DISCONNECT SWITCHES, COORDINATE ALL MOTOR SIZES, STARTERS, DISCONNECT SWITCHES, CONTROLS, ETC. WITH ELECTRICAL CONTRACTOR AND HVAC CONTROLS CONTRACTOR PRIOR TO THE RELEASE OF ANY EQUIPMENT. 20. CONTRACTOR SHALL PROVIDE HIGH POINT VENTS AND LOW POINT DRAINS CONTRACTOR SHALL PROVIDE HIGH POINT VENTS AND LOW POINT DRAINS AS REQUIRED IN FINAL ROUTING OF PIPING. 21. REFER TO SPECIFICATIONS FOR ADDITIONAL INFORMATION AND REFER TO SPECIFICATIONS FOR ADDITIONAL INFORMATION AND REQUIREMENTS.
AutoCAD SHX Text
PRESSURE DROP
AutoCAD SHX Text
PD
AutoCAD SHX Text
HOT GLYCOL SUPPLY/RETURN
AutoCAD SHX Text
HGS/R
AutoCAD SHX Text
VARIABLE FREQUENCY DRIVE
AutoCAD SHX Text
VFD
AutoCAD SHX Text
NOT APPLICABLE
AutoCAD SHX Text
N/A
AutoCAD SHX Text
M
AutoCAD SHX Text
MOTORIZED BUTTERFLY VALVE
AutoCAD SHX Text
BOTTOM OF UNIT
AutoCAD SHX Text
BOU
AutoCAD SHX Text
STEAM
AutoCAD SHX Text
STM
AutoCAD SHX Text
2-WAY MODULATING VALVE
AutoCAD SHX Text
FLEXIBLE CONNECTION
AutoCAD SHX Text
RELIEF VALVE
AutoCAD SHX Text
HEATING COIL
AutoCAD SHX Text
HC
AutoCAD SHX Text
ROOF TOP UNIT
AutoCAD SHX Text
RTU
AutoCAD SHX Text
CONNECT TO EXISTING
AutoCAD SHX Text
BOILER
AutoCAD SHX Text
B
AutoCAD SHX Text
EXHAUST AIR FAN
AutoCAD SHX Text
EAF
AutoCAD SHX Text
DUCTED HEATING COIL
AutoCAD SHX Text
DHC
AutoCAD SHX Text
FIN-TUBE RADIATION
AutoCAD SHX Text
FTR
AutoCAD SHX Text
PROGRAMMABLE LOGIC CONTROL
AutoCAD SHX Text
PLC
AutoCAD SHX Text
INTEGRATED PART LOAD VALUE
AutoCAD SHX Text
IPLV
AutoCAD SHX Text
NON-STANDARD PART LOAD VALUE
AutoCAD SHX Text
NPLV
AutoCAD SHX Text
MINIMUM CIRCUIT AMPACITY
AutoCAD SHX Text
MCA
AutoCAD SHX Text
LEAVING
AutoCAD SHX Text
LEAVING WATER TEMPERATURE
AutoCAD SHX Text
LEAVING AIR TEMPERATURE
AutoCAD SHX Text
LVG
AutoCAD SHX Text
LWT
AutoCAD SHX Text
LAT
AutoCAD SHX Text
POUNDS
AutoCAD SHX Text
LBS
AutoCAD SHX Text
DECIBELS
AutoCAD SHX Text
dBA
AutoCAD SHX Text
3-WAY MODULATING VALVE
AutoCAD SHX Text
AVERAGE GLYCOL TEMPERATURE
AutoCAD SHX Text
AGT
AutoCAD SHX Text
FLOW BALANCING VALVE
AutoCAD SHX Text
NATURAL GAS
AutoCAD SHX Text
NG
AutoCAD SHX Text
F
AutoCAD SHX Text
FLOW SWITCH
AutoCAD SHX Text
RETURN AIR FAN
AutoCAD SHX Text
RAF
AutoCAD SHX Text
MAKE-UP WATER
AutoCAD SHX Text
MU
AutoCAD SHX Text
HOT GLYCOL RETURN
AutoCAD SHX Text
HGR
AutoCAD SHX Text
HOT GLYCOL SUPPLY
AutoCAD SHX Text
HGS
AutoCAD SHX Text
COMBUSTION AIR INTAKE
AutoCAD SHX Text
CA
AutoCAD SHX Text
PROTECTED WATER
AutoCAD SHX Text
P
AutoCAD SHX Text
SANITARY
AutoCAD SHX Text
S
AutoCAD SHX Text
FLUME EXHAUST
AutoCAD SHX Text
VENT
AutoCAD SHX Text
BLACK STEEL
AutoCAD SHX Text
STL
AutoCAD SHX Text
TYPE B VENT (CAT I VENT PIPE)
AutoCAD SHX Text
TYPE
AutoCAD SHX Text
GRAVITY VENTILATOR
AutoCAD SHX Text
GV
AutoCAD SHX Text
CONTROL DAMPER
AutoCAD SHX Text
CD
AutoCAD SHX Text
OPPOSITE
AutoCAD SHX Text
OPP
AutoCAD SHX Text
PUMP
AutoCAD SHX Text
P
AutoCAD SHX Text
X
AutoCAD SHX Text
X
AutoCAD SHX Text
CS CURRENT SWITCH CURRENT SWITCH TS TEMPERATURE SWITCH TEMPERATURE SWITCH FS FLOW SWITCH FLOW SWITCH OS OCCUPANCY SWITCH OCCUPANCY SWITCH SD SMOKE DETECTOR SMOKE DETECTOR TE TEMPERATURE ELEMENT TEMPERATURE ELEMENT TT TEMPERATURE TRANSMITTER TEMPERATURE TRANSMITTER DPS DIFFERENTIAL PRESSURE SWITCH DIFFERENTIAL PRESSURE SWITCH PI PRESSURE INSTRUMENT PRESSURE INSTRUMENT PS PRESSURE SWITCH PRESSURE SWITCH TI TEMPERATURE INSTRUMENT TEMPERATURE INSTRUMENT MS MOISTURE SENSOR (HUMIDITY) MOISTURE SENSOR (HUMIDITY) MT MOISTURE TRANSMITTER)MOISTURE TRANSMITTER)
AutoCAD SHX Text
DIVISION FURNISHED BY
AutoCAD SHX Text
I/O LEGEND ANALOG INPUT ANALOG OUTPUT DIGITAL INPUT DIGITAL OUTPUT
AutoCAD SHX Text
LIMIT OF REMOVAL
AutoCAD SHX Text
ELECTRIC MOTOR
AutoCAD SHX Text
MODULATING ACTUATOR WITH END SWITCH
AutoCAD SHX Text
TWO POSITION ACUTATOR WITH END SWITCH
AutoCAD SHX Text
M
AutoCAD SHX Text
A
AutoCAD SHX Text
A
AutoCAD SHX Text
ELEMENT/TRANSMITTER (SENSOR)
AutoCAD SHX Text
X
AutoCAD SHX Text
SWITCH
AutoCAD SHX Text
X
AutoCAD SHX Text
DIAL
AutoCAD SHX Text
INDICATOR LAMP G GREEN GREEN R RED RED A AMBER AMBER PB INTEGRAL PUSHBUTTONINTEGRAL PUSHBUTTON
AutoCAD SHX Text
G
AutoCAD SHX Text
PB
AutoCAD SHX Text
PARALLEL BLADE DAMPER
AutoCAD SHX Text
OPPOSED BLADE DAMPER
AutoCAD SHX Text
HS
AutoCAD SHX Text
HOA
AutoCAD SHX Text
R
AutoCAD SHX Text
PB
AutoCAD SHX Text
INDICATOR LAMP W/ PUSH BUTTON FUNCTIONALITY
AutoCAD SHX Text
HAND SWITCH HOA HAND OFF AUTO HAND OFF AUTO OA OFF AUTO OFF AUTO PB PUSH BUTTONPUSH BUTTON
AutoCAD SHX Text
INSTRUMENT TYPE
AutoCAD SHX Text
1. SENSORS, TRANSMITTERS, SWITCHES, INSTRUMENTS, VALVES, ACTUATORS, EQUIPMENT, SENSORS, TRANSMITTERS, SWITCHES, INSTRUMENTS, VALVES, ACTUATORS, EQUIPMENT, CONTROLLERS AND WIRING SHALL BE FURNISHED AND INSTALLED BY DIV. 23 UNLESS OTHERWISE INDICATED. 2. MODULATING VALVE AND DAMPER ACTUATORS SHALL BE 24VAC POWER WITH 0-10VDC SIGNAL MODULATING VALVE AND DAMPER ACTUATORS SHALL BE 24VAC POWER WITH 0-10VDC SIGNAL UNLESS OTHERWISE INDICATED. 3. TWO POSITION VALVE AND DAMPER ACTUATORS SHALL BE 24VAC POWER UNLESS OTHERWISE TWO POSITION VALVE AND DAMPER ACTUATORS SHALL BE 24VAC POWER UNLESS OTHERWISE INDICATED. 4. CONTROL POWER SHALL BE DERIVED FROM 120VAC CIRCUIT PROVIDED BY DIV. 26 TO THE ATC CONTROL POWER SHALL BE DERIVED FROM 120VAC CIRCUIT PROVIDED BY DIV. 26 TO THE ATC PANEL. 5. BALANCING CONTRACTOR SHALL REVIEW ATC DIAGRAMS TO IDENTIFY SYSTEMS WHICH REQUIRE BALANCING CONTRACTOR SHALL REVIEW ATC DIAGRAMS TO IDENTIFY SYSTEMS WHICH REQUIRE BALANCING TO DETERMINE SPECIFIC SETPOINTS. 6. ALL THERMOSTATS SHALL BE MOUNTED IN LINE WITH CENTERLINE OF LIGHT SWITCH AT 48" ALL THERMOSTATS SHALL BE MOUNTED IN LINE WITH CENTERLINE OF LIGHT SWITCH AT 48" A.F.F. UNLESS OTHERWISE NOTED. VERIFY MOUNTING HEIGHT IS 48" PRIOR TO BALANCING SYSTEMS. CONTRACTOR SHALL CALIBRATE ALL THERMOSTATS. 7. REFER TO ELECTRICAL DRAWINGS FOR AREA CLASSIFICATIONS.REFER TO ELECTRICAL DRAWINGS FOR AREA CLASSIFICATIONS.
AutoCAD SHX Text
NEW LINEWORK
AutoCAD SHX Text
EXISTING LINEWORK
AutoCAD SHX Text
PLANS
AutoCAD SHX Text
DIAGRAMS
AutoCAD SHX Text
AIR COOLED CONDENSER
AutoCAD SHX Text
ACC
AutoCAD SHX Text
MAXIMUM
AutoCAD SHX Text
MAX
AutoCAD SHX Text
MOTORIZED DAMPER
AutoCAD SHX Text
MOD
AutoCAD SHX Text
DROP
AutoCAD SHX Text
DP
AutoCAD SHX Text
ELECTRIC CABINET HEATER
AutoCAD SHX Text
ECH
AutoCAD SHX Text
DH
AutoCAD SHX Text
COND
AutoCAD SHX Text
ODOR CONTROL FAN
AutoCAD SHX Text
OCF
AutoCAD SHX Text
WEATHER HOOD
AutoCAD SHX Text
WH
AutoCAD SHX Text
DUCT HEATER
AutoCAD SHX Text
CONDENSATE DRAIN
AutoCAD SHX Text
Last saved by: FLAHERTYDM Time: 3/6/2020 12:20:55 PM
AutoCAD SHX Text
XREFs: [CDMS_2234] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H001CHLA.dwg
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2
02
0
H-100
BASEMENT
PLAN
PLAN
N
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H100CHPL.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
8
AutoCAD SHX Text
4
AutoCAD SHX Text
0
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
1/8%%34 = 1'- 0%%34
AutoCAD SHX Text
BASEMENT
AutoCAD SHX Text
1/8" = 1'-0"
AutoCAD SHX Text
UP
AutoCAD SHX Text
CRAWL SPACE 3
AutoCAD SHX Text
ELEV #1
AutoCAD SHX Text
ELEV MACH ROOM B35
AutoCAD SHX Text
STORAGE B26
AutoCAD SHX Text
FUEL ROOM B33
AutoCAD SHX Text
MECHANICAL ROOM B28
AutoCAD SHX Text
B34
AutoCAD SHX Text
B32
AutoCAD SHX Text
B31
AutoCAD SHX Text
BUILDING SUPERVISOR
AutoCAD SHX Text
ELECTRICAL ROOM B30
AutoCAD SHX Text
MECHANICAL ROOM B02
AutoCAD SHX Text
B29
AutoCAD SHX Text
B27
AutoCAD SHX Text
ELECTRICAL ROOM B03
AutoCAD SHX Text
B05
AutoCAD SHX Text
CORRIDOR A
AutoCAD SHX Text
STG B06
AutoCAD SHX Text
PASSAGE B09
AutoCAD SHX Text
ENTRY B07
AutoCAD SHX Text
STORAGE B08
AutoCAD SHX Text
OFFICE B10
AutoCAD SHX Text
CORRIDOR B
AutoCAD SHX Text
VESTIBULE B01
AutoCAD SHX Text
CELL 14
AutoCAD SHX Text
STG B16
AutoCAD SHX Text
B17
AutoCAD SHX Text
JAN B15
AutoCAD SHX Text
A6
AutoCAD SHX Text
P6
AutoCAD SHX Text
OFFICE B13
AutoCAD SHX Text
B12
AutoCAD SHX Text
CORRIDOR C
AutoCAD SHX Text
STORAGE B18
AutoCAD SHX Text
TELEPHONE ROOM B19
AutoCAD SHX Text
AREAWAY
AutoCAD SHX Text
ELEV #2
AutoCAD SHX Text
UNEX
AutoCAD SHX Text
CRAWL SPACE 4
AutoCAD SHX Text
CRAWL SPACE 2
AutoCAD SHX Text
CRAWL SPACE 1
AutoCAD SHX Text
STG B20
AutoCAD SHX Text
ELEVATOR MACHINE ROOM B22
AutoCAD SHX Text
B25
AutoCAD SHX Text
ELEC ROOM B21
AutoCAD SHX Text
OFFICE B23
AutoCAD SHX Text
LOUNGE B24
AutoCAD SHX Text
STAIR 1
AutoCAD SHX Text
B11
AutoCAD SHX Text
TOILET B14
AutoCAD SHX Text
B04
AutoCAD SHX Text
AHU-1
AutoCAD SHX Text
CH-1
AutoCAD SHX Text
AC-8
AutoCAD SHX Text
BLR-1
AutoCAD SHX Text
HX-1
AutoCAD SHX Text
AC-2
AutoCAD SHX Text
AC-5
AutoCAD SHX Text
AC-6
AutoCAD SHX Text
AC-3
AutoCAD SHX Text
AC-1
AutoCAD SHX Text
CP-AC-5
AutoCAD SHX Text
CP-AC-3,4
AutoCAD SHX Text
MS-3,4
AutoCAD SHX Text
CP-AC-1,10
AutoCAD SHX Text
CP-CHW
AutoCAD SHX Text
P-4
AutoCAD SHX Text
P-3
AutoCAD SHX Text
P-2
AutoCAD SHX Text
P-1
AutoCAD SHX Text
P-5
AutoCAD SHX Text
CP-AC-2,8
AutoCAD SHX Text
CP-AC-9
AutoCAD SHX Text
BP-1
AutoCAD SHX Text
BP-2
AutoCAD SHX Text
CP-HW
AutoCAD SHX Text
EF
AutoCAD SHX Text
CP-AHU-1
AutoCAD SHX Text
AC-4
AutoCAD SHX Text
AC-5
AutoCAD SHX Text
2
AutoCAD SHX Text
1
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
KEYED NOTES 1. DEMOLISH EXISTING CONTROLLER AND INSTALL DEMOLISH EXISTING CONTROLLER AND INSTALL APPLICATION SPECIFIC CONTROLLER. 2. DEMOLISH TWO (2) EXISTING CONTROLLERS AND DEMOLISH TWO (2) EXISTING CONTROLLERS AND INSTALL TWO (2) APPLICATION SPECIFIC CONTROLLERS. 3. DEMOLISH EXISTING CONTROLLER AND INSTALL DEMOLISH EXISTING CONTROLLER AND INSTALL PROGRAMMABLE APPLICATION CONTROLLER. 4. DEMOLISH EXISTING CONTROLLER AND INSTALL DEMOLISH EXISTING CONTROLLER AND INSTALL NETWORK CONTROLLER. 5. INSTALL PRESSURE GAGE AND PRESSURE SWITCH INSTALL PRESSURE GAGE AND PRESSURE SWITCH ON COMPRESSED AIR TUBING.
AutoCAD SHX Text
-
AutoCAD SHX Text
CP-NC
AutoCAD SHX Text
AIR COMPRESSOR
AutoCAD SHX Text
PS
AutoCAD SHX Text
5
AutoCAD SHX Text
PI
AutoCAD SHX Text
GENERAL NOTES 1. RE-TERMINATE EXISTING WIRING ON NEW RE-TERMINATE EXISTING WIRING ON NEW CONTROLLERS. PROVIDE TERMINAL STRIPS WITHIN ENCLOSURES AS REQUIRED TO EXTEND WIRING WHERE REQUIRED. 2. PROVIDE ADDITIONAL ENCLOSURE FOR NEW PROVIDE ADDITIONAL ENCLOSURE FOR NEW CONTROLLERS WHERE SPACE IN EXISTING ENCLOSURE DOES MEET INSTALLATION REQUIREMENTS OF NEW CONTROLLER(S).
AutoCAD SHX Text
Last saved by: KINSONJR Time: 3/6/2020 8:36:49 AM
AutoCAD SHX Text
XREFs: [CDMS_2234, AWP000CH, HWP000CH] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H100CHPL.DWG
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2
02
0
H-101
FIRST FLOOR
PLAN
PLAN
N
AutoCAD SHX Text
T
AutoCAD SHX Text
T
AutoCAD SHX Text
T
AutoCAD SHX Text
T
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H101CHPL.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
8
AutoCAD SHX Text
4
AutoCAD SHX Text
0
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
1/8%%34 = 1'- 0%%34
AutoCAD SHX Text
FIRST FLOOR
AutoCAD SHX Text
1/8" = 1'-0"
AutoCAD SHX Text
CONF ROOM 135
AutoCAD SHX Text
TOIL 136
AutoCAD SHX Text
TOIL 137
AutoCAD SHX Text
TOIL 138
AutoCAD SHX Text
OFFICE 139
AutoCAD SHX Text
ELEV #1
AutoCAD SHX Text
VEST
AutoCAD SHX Text
VEST
AutoCAD SHX Text
COURTROOM D
AutoCAD SHX Text
VEST 140
AutoCAD SHX Text
STAIR 2
AutoCAD SHX Text
WTG 141
AutoCAD SHX Text
OFFICE 164
AutoCAD SHX Text
OFFICE 144
AutoCAD SHX Text
CORRIDOR F
AutoCAD SHX Text
STG 143
AutoCAD SHX Text
COURTROOM C & E
AutoCAD SHX Text
COURTROOM B
AutoCAD SHX Text
OFFICE 146
AutoCAD SHX Text
TOIL 145
AutoCAD SHX Text
OFFICE 147
AutoCAD SHX Text
TOIL 148
AutoCAD SHX Text
149
AutoCAD SHX Text
149A
AutoCAD SHX Text
0FFICE 152
AutoCAD SHX Text
STG 151
AutoCAD SHX Text
153
AutoCAD SHX Text
LOBBY B
AutoCAD SHX Text
PUBLIC INFO DESK
AutoCAD SHX Text
OFFICE 154
AutoCAD SHX Text
PUBLIC LOBBY
AutoCAD SHX Text
OFFICE 109
AutoCAD SHX Text
CORRIDOR A
AutoCAD SHX Text
STORAGE 114
AutoCAD SHX Text
OFFICE 110
AutoCAD SHX Text
OFFICE 111
AutoCAD SHX Text
OFFICE 112
AutoCAD SHX Text
MEN 113
AutoCAD SHX Text
WOMEN 115
AutoCAD SHX Text
OPEN OFFICE 116
AutoCAD SHX Text
STORAGE 117
AutoCAD SHX Text
VEST
AutoCAD SHX Text
VEST
AutoCAD SHX Text
COURTROOM A
AutoCAD SHX Text
AREAWAY BELOW
AutoCAD SHX Text
STAIR 3
AutoCAD SHX Text
UP
AutoCAD SHX Text
DN
AutoCAD SHX Text
CONF 121
AutoCAD SHX Text
TOIL 124
AutoCAD SHX Text
OFFICE 123
AutoCAD SHX Text
122
AutoCAD SHX Text
JAN 120
AutoCAD SHX Text
TOIL 118
AutoCAD SHX Text
TOIL 119
AutoCAD SHX Text
OFFICE 150
AutoCAD SHX Text
CORRIDOR D
AutoCAD SHX Text
WOMEN 127
AutoCAD SHX Text
JAN
AutoCAD SHX Text
MEN 126
AutoCAD SHX Text
CORRIDOR C
AutoCAD SHX Text
STAIR 1
AutoCAD SHX Text
DN
AutoCAD SHX Text
OFFICE 125
AutoCAD SHX Text
OFFICE 130
AutoCAD SHX Text
131
AutoCAD SHX Text
OFFICE 129
AutoCAD SHX Text
OFFICE 128
AutoCAD SHX Text
JAN 132
AutoCAD SHX Text
133
AutoCAD SHX Text
ELEV #2
AutoCAD SHX Text
134
AutoCAD SHX Text
LOUNGE 180
AutoCAD SHX Text
VESTIBULE
AutoCAD SHX Text
CORRIDOR B
AutoCAD SHX Text
LOBBY A
AutoCAD SHX Text
UP
AutoCAD SHX Text
UP
AutoCAD SHX Text
UP
AutoCAD SHX Text
AC-9
AutoCAD SHX Text
AC-10
AutoCAD SHX Text
AC-9
AutoCAD SHX Text
AC-10
AutoCAD SHX Text
AC-1
AutoCAD SHX Text
AC-6
AutoCAD SHX Text
AC-3
AutoCAD SHX Text
AC-4
AutoCAD SHX Text
AC-8
AutoCAD SHX Text
AC-2
AutoCAD SHX Text
WINDOW AC
AutoCAD SHX Text
WINDOW AC
AutoCAD SHX Text
WINDOW AC
AutoCAD SHX Text
WINDOW AC
AutoCAD SHX Text
WINDOW AC
AutoCAD SHX Text
WINDOW AC
AutoCAD SHX Text
WINDOW AC
AutoCAD SHX Text
WINDOW AC
AutoCAD SHX Text
Last saved by: KINSONJR Time: 3/6/2020 8:38:28 AM
AutoCAD SHX Text
XREFs: [CDMS_2234, AWP001CH, HWP001CH] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H101CHPL.DWG
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2
02
0
H-102
SECOND FLOOR
PLAN
PLAN
N
AutoCAD SHX Text
S
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H102CHPL.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
8
AutoCAD SHX Text
4
AutoCAD SHX Text
0
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
1/8%%34 = 1'- 0%%34
AutoCAD SHX Text
SECOND FLOOR
AutoCAD SHX Text
1/8" = 1'-0"
AutoCAD SHX Text
CORRIDOR E
AutoCAD SHX Text
UP
AutoCAD SHX Text
DN
AutoCAD SHX Text
244A
AutoCAD SHX Text
244B
AutoCAD SHX Text
CORRIDOR F
AutoCAD SHX Text
DN
AutoCAD SHX Text
STAIR 1
AutoCAD SHX Text
UP
AutoCAD SHX Text
UP
AutoCAD SHX Text
CORRIDOR G
AutoCAD SHX Text
DN
AutoCAD SHX Text
208
AutoCAD SHX Text
CORRIDOR A
AutoCAD SHX Text
213
AutoCAD SHX Text
CORRIDOR B
AutoCAD SHX Text
219
AutoCAD SHX Text
UP
AutoCAD SHX Text
DN
AutoCAD SHX Text
CORRIDOR D
AutoCAD SHX Text
235
AutoCAD SHX Text
223
AutoCAD SHX Text
CORRIDOR C
AutoCAD SHX Text
209
AutoCAD SHX Text
OFFICE
AutoCAD SHX Text
OFFICE 236
AutoCAD SHX Text
MEN 237
AutoCAD SHX Text
WOMEN 238
AutoCAD SHX Text
UPPER PART OF COURTROOM D
AutoCAD SHX Text
ELEV #1
AutoCAD SHX Text
239
AutoCAD SHX Text
STAIR 2
AutoCAD SHX Text
OFFICE 240
AutoCAD SHX Text
OFFICE 241
AutoCAD SHX Text
OFFICE 242
AutoCAD SHX Text
CLERICAL OFFICE 244
AutoCAD SHX Text
OFFICE 245
AutoCAD SHX Text
OFFICE 246
AutoCAD SHX Text
OFFICE 247
AutoCAD SHX Text
OFFICE 248
AutoCAD SHX Text
OFFICE 250
AutoCAD SHX Text
OFFICE 251
AutoCAD SHX Text
OFFICE 252
AutoCAD SHX Text
OFFICE 253
AutoCAD SHX Text
OFFICE 254
AutoCAD SHX Text
OFFICE 256
AutoCAD SHX Text
OFFICE 249
AutoCAD SHX Text
VEST 259
AutoCAD SHX Text
CONF RM
AutoCAD SHX Text
CONF RM 258
AutoCAD SHX Text
WAITING 243
AutoCAD SHX Text
PUBLIC LOBBY
AutoCAD SHX Text
OFFICE 234
AutoCAD SHX Text
OFFICE 233
AutoCAD SHX Text
OFFICE 232
AutoCAD SHX Text
OFFICE 231
AutoCAD SHX Text
OFFICE 230
AutoCAD SHX Text
STORAGE 229
AutoCAD SHX Text
OFFICE 226
AutoCAD SHX Text
OFFICE 228
AutoCAD SHX Text
OFFICE 227
AutoCAD SHX Text
OFFICE 225
AutoCAD SHX Text
OFFICE 224
AutoCAD SHX Text
UPPER PART OF COURTROOM A
AutoCAD SHX Text
OFFICE 257
AutoCAD SHX Text
OFFICE 255
AutoCAD SHX Text
OFFICE 201
AutoCAD SHX Text
OFFICE 202
AutoCAD SHX Text
OFFICE 203
AutoCAD SHX Text
CLERICAL OFFICE 204
AutoCAD SHX Text
MEN 206
AutoCAD SHX Text
WTG 205
AutoCAD SHX Text
OFFICE 207
AutoCAD SHX Text
MECHANICAL ROOM 210
AutoCAD SHX Text
OFFICE 211
AutoCAD SHX Text
OFFICE 212
AutoCAD SHX Text
OFFICE 214
AutoCAD SHX Text
OFFICE 215
AutoCAD SHX Text
OFFICE 216
AutoCAD SHX Text
OFFICE 217
AutoCAD SHX Text
OFFICE 218
AutoCAD SHX Text
STAIR 3
AutoCAD SHX Text
WOMEN 220
AutoCAD SHX Text
AHU-2
AutoCAD SHX Text
CP-AHU-2,AC-6
AutoCAD SHX Text
AHU-1
AutoCAD SHX Text
AHU-2
AutoCAD SHX Text
KEYED NOTES 1. DEMOLISH TWO (2) EXISTING CONTROLLERS AND DEMOLISH TWO (2) EXISTING CONTROLLERS AND INSTALL ONE APPLICATION SPECIFIC CONTROLLER AND ONE PROGRAMMABLE APPLICATION CONTROLLER. 2. DEMOLISH EXISTING CO2 SENSOR AND REPLACE IN DEMOLISH EXISTING CO2 SENSOR AND REPLACE IN KIND OR EQUAL. (JCI MODEL CD-P00-00-0.)
AutoCAD SHX Text
-
AutoCAD SHX Text
1
AutoCAD SHX Text
MANUALLY OPERATED TRANSFER FAN
AutoCAD SHX Text
WINDOW AC
AutoCAD SHX Text
CO2
AutoCAD SHX Text
2
AutoCAD SHX Text
GENERAL NOTES 1. RE-TERMINATE EXISTING WIRING ON NEW RE-TERMINATE EXISTING WIRING ON NEW CONTROLLERS. PROVIDE TERMINAL STRIPS WITHIN ENCLOSURES AS REQUIRED TO EXTEND WIRING WHERE REQUIRED. 2. PROVIDE ADDITIONAL ENCLOSURE FOR NEW PROVIDE ADDITIONAL ENCLOSURE FOR NEW CONTROLLERS WHERE SPACE IN EXISTING ENCLOSURE DOES MEET INSTALLATION REQUIREMENTS OF NEW CONTROLLER(S).
AutoCAD SHX Text
Last saved by: KINSONJR Time: 3/6/2020 8:39:26 AM
AutoCAD SHX Text
XREFs: [CDMS_2234, AWP002CH, HWP002CH] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H102CHPL.DWG
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2
02
0
H-103
THIRD FLOOR
PLAN
PLAN
N
AutoCAD SHX Text
T
AutoCAD SHX Text
T
AutoCAD SHX Text
T
AutoCAD SHX Text
T
AutoCAD SHX Text
T
AutoCAD SHX Text
T
AutoCAD SHX Text
T
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H103CHPL.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
8
AutoCAD SHX Text
4
AutoCAD SHX Text
0
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
1/8%%34 = 1'- 0%%34
AutoCAD SHX Text
THIRD FLOOR
AutoCAD SHX Text
1/8" = 1'-0"
AutoCAD SHX Text
COURTROOM 3B
AutoCAD SHX Text
CORRIDOR B
AutoCAD SHX Text
UP
AutoCAD SHX Text
DN
AutoCAD SHX Text
UP
AutoCAD SHX Text
COURTROOM 3C
AutoCAD SHX Text
CORRIDOR C
AutoCAD SHX Text
UP
AutoCAD SHX Text
STAIR 5
AutoCAD SHX Text
CORRIDOR D
AutoCAD SHX Text
COURTROOM 3A
AutoCAD SHX Text
368
AutoCAD SHX Text
TOIL
AutoCAD SHX Text
STAIR 1
AutoCAD SHX Text
DN
AutoCAD SHX Text
DN
AutoCAD SHX Text
VEST
AutoCAD SHX Text
VEST
AutoCAD SHX Text
COURTROOM 3D
AutoCAD SHX Text
CORRIDOR A
AutoCAD SHX Text
MEN
AutoCAD SHX Text
344
AutoCAD SHX Text
DN
AutoCAD SHX Text
CORRIDOR E
AutoCAD SHX Text
CLOS
AutoCAD SHX Text
OFFICE 351
AutoCAD SHX Text
OFFICE 352
AutoCAD SHX Text
OFFICE 353
AutoCAD SHX Text
TOIL 354
AutoCAD SHX Text
ELEV #1
AutoCAD SHX Text
JAN 355
AutoCAD SHX Text
STAIR 2
AutoCAD SHX Text
WTG 358
AutoCAD SHX Text
PUBLIC LOBBY
AutoCAD SHX Text
OFFICE 356
AutoCAD SHX Text
CONF ROOM 365
AutoCAD SHX Text
TOIL 366
AutoCAD SHX Text
TOIL 357
AutoCAD SHX Text
TOIL 367
AutoCAD SHX Text
TOIL 364
AutoCAD SHX Text
STORAGE 362
AutoCAD SHX Text
TOIL 346
AutoCAD SHX Text
TOIL 345
AutoCAD SHX Text
WOMEN 350
AutoCAD SHX Text
TOIL 348
AutoCAD SHX Text
OFFICE 349
AutoCAD SHX Text
OFFICE 347
AutoCAD SHX Text
TOIL 341
AutoCAD SHX Text
ELEV #2
AutoCAD SHX Text
OFFICE 370
AutoCAD SHX Text
VEST 369
AutoCAD SHX Text
OPEN OFFICE AREA 373
AutoCAD SHX Text
OFFICE 371
AutoCAD SHX Text
OFFICE 372
AutoCAD SHX Text
STORAGE 374
AutoCAD SHX Text
CLOS 376
AutoCAD SHX Text
CLOS 375
AutoCAD SHX Text
CONF ROOM 378
AutoCAD SHX Text
CONF ROOM 379
AutoCAD SHX Text
CONF ROOM 318
AutoCAD SHX Text
OFFICE 383
AutoCAD SHX Text
TOIL 382
AutoCAD SHX Text
CONF ROOM 381
AutoCAD SHX Text
STAIR 3
AutoCAD SHX Text
OFFICE 343
AutoCAD SHX Text
OFFICE 363
AutoCAD SHX Text
GENERAL OFFICE AREA 359
AutoCAD SHX Text
TOIL 360
AutoCAD SHX Text
OFFICE 361
AutoCAD SHX Text
TOIL 380
AutoCAD SHX Text
AHU-1
AutoCAD SHX Text
AHU-2
AutoCAD SHX Text
Last saved by: KINSONJR Time: 3/6/2020 8:40:23 AM
AutoCAD SHX Text
XREFs: [CDMS_2234, AWP003CH, HWP003CH] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H103CHPL.DWG
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2
02
0
H-104
ATTIC
PLAN
PLAN
N
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H104CHPL.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
8
AutoCAD SHX Text
4
AutoCAD SHX Text
0
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
1/8%%34 = 1'- 0%%34
AutoCAD SHX Text
ATTIC
AutoCAD SHX Text
1/8" = 1'-0"
AutoCAD SHX Text
UP
AutoCAD SHX Text
DN
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
ROOM
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
ELEV
AutoCAD SHX Text
STAIR 2
AutoCAD SHX Text
DN
AutoCAD SHX Text
ROOM
AutoCAD SHX Text
UPPER PART OF COURTROOM 3B
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
UPPER PART OF COURTROOM 3D
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
UPPER PART OF COURTROOM 3A
AutoCAD SHX Text
UPPER PART OF COURTROOM 3C
AutoCAD SHX Text
STAIR 5
AutoCAD SHX Text
ROOM
AutoCAD SHX Text
ROOM
AutoCAD SHX Text
Last saved by: KINSONJR Time: 3/6/2020 8:55:46 AM
AutoCAD SHX Text
XREFs: [CDMS_2234, AWP004CH] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H104CHPL.DWG
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2
02
0
H-105
ROOF
PLAN
PLAN
N
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H105CHPL.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
8
AutoCAD SHX Text
4
AutoCAD SHX Text
0
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
1/8%%34 = 1'- 0%%34
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
1/8" = 1'-0"
AutoCAD SHX Text
FLAT ROOF
AutoCAD SHX Text
DORMER
AutoCAD SHX Text
FLAT ROOF
AutoCAD SHX Text
FLAT ROOF
AutoCAD SHX Text
FLAT ROOF
AutoCAD SHX Text
ROOF HATCH
AutoCAD SHX Text
FLAT ROOF
AutoCAD SHX Text
ROOF HATCH
AutoCAD SHX Text
RELIEF AIR DIFFUSER (TYPICAL)
AutoCAD SHX Text
SKYLIGHT (TYPICAL)
AutoCAD SHX Text
PH-2
AutoCAD SHX Text
FLAT ROOF
AutoCAD SHX Text
SKYLIGHT
AutoCAD SHX Text
FLAT ROOF
AutoCAD SHX Text
PH-1
AutoCAD SHX Text
SKYLIGHT
AutoCAD SHX Text
OUTSIDE TEMPERATURE SENSOR
AutoCAD SHX Text
COOLING TOWERS
AutoCAD SHX Text
Last saved by: KINSONJR Time: 3/6/2020 8:56:59 AM
AutoCAD SHX Text
XREFs: [CDMS_2234, AWP005CH, HWP005CH] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H105CHPL.DWG
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2
02
0
H-700
PROCESS AND INSTRUMENTATION DIAGRAM
AHU-1
DIAGRAM 1
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H700CHDI.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
LC-AHU-1
AutoCAD SHX Text
AHU-1
AutoCAD SHX Text
-
AutoCAD SHX Text
NTS
AutoCAD SHX Text
B/L
AutoCAD SHX Text
SUPPLY AIR
AutoCAD SHX Text
A
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
CO2
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
LL
AutoCAD SHX Text
H-703
AutoCAD SHX Text
CHILLED WATER SUPPLY
AutoCAD SHX Text
FAN
AutoCAD SHX Text
M
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
XS
AutoCAD SHX Text
PE/PT
AutoCAD SHX Text
COOLING COIL
AutoCAD SHX Text
HEATING COIL
AutoCAD SHX Text
FILTER
AutoCAD SHX Text
H-705
AutoCAD SHX Text
HOT WATER SUPPLY
AutoCAD SHX Text
VALVE POSITION
AutoCAD SHX Text
VALVE POSITION
AutoCAD SHX Text
DAMPER POSITION
AutoCAD SHX Text
RET AIR TEMP
AutoCAD SHX Text
MIX AIR TEMP
AutoCAD SHX Text
LOW LIMIT TEMP
AutoCAD SHX Text
RET AIR CO2
AutoCAD SHX Text
SUP AIR TEMP
AutoCAD SHX Text
SMOKE ALARM
AutoCAD SHX Text
STATIC PRESSURE
AutoCAD SHX Text
HS
AutoCAD SHX Text
HOA
AutoCAD SHX Text
DISPLAY
AutoCAD SHX Text
FAN ENABLE
AutoCAD SHX Text
SPEED
AutoCAD SHX Text
POWER (BY DIV. 26)
AutoCAD SHX Text
VFD
AutoCAD SHX Text
CS
AutoCAD SHX Text
FAN RUNNING
AutoCAD SHX Text
XS
AutoCAD SHX Text
SMOKE ALARM
AutoCAD SHX Text
MANUAL DAMPER
AutoCAD SHX Text
SEQUENCE OF OPERATION SUPPLY FAN START/STOP THE SUPPLY FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE SUPPLY FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE SUPPLY FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE BE STARTED ACCORDING TO THE SCHEDULE. IF THE BE STARTED ACCORDING TO THE SCHEDULE. IF THE STARTED ACCORDING TO THE SCHEDULE. IF THE STARTED ACCORDING TO THE SCHEDULE. IF THE ACCORDING TO THE SCHEDULE. IF THE ACCORDING TO THE SCHEDULE. IF THE TO THE SCHEDULE. IF THE TO THE SCHEDULE. IF THE THE SCHEDULE. IF THE THE SCHEDULE. IF THE SCHEDULE. IF THE SCHEDULE. IF THE IF THE IF THE THE THE SUPPLY FAN STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM FAN STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM FAN STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM DOES NOT MATCH THE COMMANDED VALUE, AN ALARM DOES NOT MATCH THE COMMANDED VALUE, AN ALARM NOT MATCH THE COMMANDED VALUE, AN ALARM NOT MATCH THE COMMANDED VALUE, AN ALARM MATCH THE COMMANDED VALUE, AN ALARM MATCH THE COMMANDED VALUE, AN ALARM THE COMMANDED VALUE, AN ALARM THE COMMANDED VALUE, AN ALARM COMMANDED VALUE, AN ALARM COMMANDED VALUE, AN ALARM VALUE, AN ALARM VALUE, AN ALARM AN ALARM AN ALARM ALARM ALARM WILL BE GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN BE GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN BE GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN WHEN THE SUPPLY FAN STATUS INDICATES THE FAN WHEN THE SUPPLY FAN STATUS INDICATES THE FAN THE SUPPLY FAN STATUS INDICATES THE FAN THE SUPPLY FAN STATUS INDICATES THE FAN SUPPLY FAN STATUS INDICATES THE FAN SUPPLY FAN STATUS INDICATES THE FAN FAN STATUS INDICATES THE FAN FAN STATUS INDICATES THE FAN STATUS INDICATES THE FAN STATUS INDICATES THE FAN INDICATES THE FAN INDICATES THE FAN THE FAN THE FAN FAN FAN STARTED, THE CONTROL SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY THE CONTROL SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY THE CONTROL SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY CONTROL SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY CONTROL SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY WILL BE ENABLED. WHEN THE SUPPLY WILL BE ENABLED. WHEN THE SUPPLY BE ENABLED. WHEN THE SUPPLY BE ENABLED. WHEN THE SUPPLY ENABLED. WHEN THE SUPPLY ENABLED. WHEN THE SUPPLY WHEN THE SUPPLY WHEN THE SUPPLY THE SUPPLY THE SUPPLY SUPPLY SUPPLY FAN STATUS HAS BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL STATUS HAS BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL STATUS HAS BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL HAS BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL HAS BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL THE MINIMUM OUTDOOR AIR DAMPER WILL THE MINIMUM OUTDOOR AIR DAMPER WILL MINIMUM OUTDOOR AIR DAMPER WILL MINIMUM OUTDOOR AIR DAMPER WILL OUTDOOR AIR DAMPER WILL OUTDOOR AIR DAMPER WILL AIR DAMPER WILL AIR DAMPER WILL DAMPER WILL DAMPER WILL WILL WILL OPEN. STATIC PRESSURE CONTROL THE SUPPLY FAN WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC SUPPLY FAN WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC SUPPLY FAN WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC FAN WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC FAN WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC MODULATE TO MAINTAIN THE DISCHARGE STATIC MODULATE TO MAINTAIN THE DISCHARGE STATIC TO MAINTAIN THE DISCHARGE STATIC TO MAINTAIN THE DISCHARGE STATIC MAINTAIN THE DISCHARGE STATIC MAINTAIN THE DISCHARGE STATIC THE DISCHARGE STATIC THE DISCHARGE STATIC DISCHARGE STATIC DISCHARGE STATIC STATIC STATIC PRESSURE AT SETPOINT. DISCHARGE AIR CONTROL THE HEATING VALVE, MIXED AIR DAMPERS, AND COOLING VALVE WILL HEATING VALVE, MIXED AIR DAMPERS, AND COOLING VALVE WILL HEATING VALVE, MIXED AIR DAMPERS, AND COOLING VALVE WILL VALVE, MIXED AIR DAMPERS, AND COOLING VALVE WILL VALVE, MIXED AIR DAMPERS, AND COOLING VALVE WILL MIXED AIR DAMPERS, AND COOLING VALVE WILL MIXED AIR DAMPERS, AND COOLING VALVE WILL AIR DAMPERS, AND COOLING VALVE WILL AIR DAMPERS, AND COOLING VALVE WILL DAMPERS, AND COOLING VALVE WILL DAMPERS, AND COOLING VALVE WILL AND COOLING VALVE WILL AND COOLING VALVE WILL COOLING VALVE WILL COOLING VALVE WILL VALVE WILL VALVE WILL WILL WILL MODULATE IN SEQUENCE TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT IN SEQUENCE TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT IN SEQUENCE TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT SEQUENCE TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT SEQUENCE TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT MAINTAIN THE DISCHARGE AIR TEMPERATURE AT MAINTAIN THE DISCHARGE AIR TEMPERATURE AT THE DISCHARGE AIR TEMPERATURE AT THE DISCHARGE AIR TEMPERATURE AT DISCHARGE AIR TEMPERATURE AT DISCHARGE AIR TEMPERATURE AT AIR TEMPERATURE AT AIR TEMPERATURE AT TEMPERATURE AT TEMPERATURE AT AT AT SETPOINT. ECONOMIZER DRY BULB SWITCHOVER WHEN THE SHARED OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER THE SHARED OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER THE SHARED OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER SHARED OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER SHARED OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER AIR TEMPERATURE IS BELOW THE SWITCHOVER AIR TEMPERATURE IS BELOW THE SWITCHOVER TEMPERATURE IS BELOW THE SWITCHOVER TEMPERATURE IS BELOW THE SWITCHOVER IS BELOW THE SWITCHOVER IS BELOW THE SWITCHOVER BELOW THE SWITCHOVER BELOW THE SWITCHOVER THE SWITCHOVER THE SWITCHOVER SWITCHOVER SWITCHOVER SETPOINT, THE ECONOMIZER WILL BE ENABLED, BY MODULATING OUTSIDE AIR THE ECONOMIZER WILL BE ENABLED, BY MODULATING OUTSIDE AIR THE ECONOMIZER WILL BE ENABLED, BY MODULATING OUTSIDE AIR ECONOMIZER WILL BE ENABLED, BY MODULATING OUTSIDE AIR ECONOMIZER WILL BE ENABLED, BY MODULATING OUTSIDE AIR WILL BE ENABLED, BY MODULATING OUTSIDE AIR WILL BE ENABLED, BY MODULATING OUTSIDE AIR BE ENABLED, BY MODULATING OUTSIDE AIR BE ENABLED, BY MODULATING OUTSIDE AIR ENABLED, BY MODULATING OUTSIDE AIR ENABLED, BY MODULATING OUTSIDE AIR BY MODULATING OUTSIDE AIR BY MODULATING OUTSIDE AIR MODULATING OUTSIDE AIR MODULATING OUTSIDE AIR OUTSIDE AIR OUTSIDE AIR AIR AIR AND MIXED AIR DAMPERS TO MAINTAIN 55F MIXED AIR TEMPERATURE. WHEN MIXED AIR DAMPERS TO MAINTAIN 55F MIXED AIR TEMPERATURE. WHEN MIXED AIR DAMPERS TO MAINTAIN 55F MIXED AIR TEMPERATURE. WHEN AIR DAMPERS TO MAINTAIN 55F MIXED AIR TEMPERATURE. WHEN AIR DAMPERS TO MAINTAIN 55F MIXED AIR TEMPERATURE. WHEN DAMPERS TO MAINTAIN 55F MIXED AIR TEMPERATURE. WHEN DAMPERS TO MAINTAIN 55F MIXED AIR TEMPERATURE. WHEN TO MAINTAIN 55F MIXED AIR TEMPERATURE. WHEN TO MAINTAIN 55F MIXED AIR TEMPERATURE. WHEN MAINTAIN 55F MIXED AIR TEMPERATURE. WHEN MAINTAIN 55F MIXED AIR TEMPERATURE. WHEN 55F MIXED AIR TEMPERATURE. WHEN 55F MIXED AIR TEMPERATURE. WHEN MIXED AIR TEMPERATURE. WHEN MIXED AIR TEMPERATURE. WHEN AIR TEMPERATURE. WHEN AIR TEMPERATURE. WHEN TEMPERATURE. WHEN TEMPERATURE. WHEN WHEN WHEN THE SHARED OUTSIDE AIR TEMPERATURE RISES ABOVE THE SWITCHOVER SHARED OUTSIDE AIR TEMPERATURE RISES ABOVE THE SWITCHOVER SHARED OUTSIDE AIR TEMPERATURE RISES ABOVE THE SWITCHOVER OUTSIDE AIR TEMPERATURE RISES ABOVE THE SWITCHOVER OUTSIDE AIR TEMPERATURE RISES ABOVE THE SWITCHOVER AIR TEMPERATURE RISES ABOVE THE SWITCHOVER AIR TEMPERATURE RISES ABOVE THE SWITCHOVER TEMPERATURE RISES ABOVE THE SWITCHOVER TEMPERATURE RISES ABOVE THE SWITCHOVER RISES ABOVE THE SWITCHOVER RISES ABOVE THE SWITCHOVER ABOVE THE SWITCHOVER ABOVE THE SWITCHOVER THE SWITCHOVER THE SWITCHOVER SWITCHOVER SWITCHOVER SETPOINT PLUS A DIFFERENTIAL, THE ECONOMIZER WILL BE DISABLED. RETURN AIR QUALITY CONTROL WHEN THE RETURN AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS THE RETURN AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS THE RETURN AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS RETURN AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS RETURN AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS IS ABOVE SETPOINT, THE MIXING DAMPERS IS ABOVE SETPOINT, THE MIXING DAMPERS ABOVE SETPOINT, THE MIXING DAMPERS ABOVE SETPOINT, THE MIXING DAMPERS SETPOINT, THE MIXING DAMPERS SETPOINT, THE MIXING DAMPERS THE MIXING DAMPERS THE MIXING DAMPERS MIXING DAMPERS MIXING DAMPERS DAMPERS DAMPERS WILL MODULATE TO PROVIDE MORE OUTDOOR AIR. SAFETIES ALL OF THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS OF THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS OF THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS ARE MANUAL RESET; THE DEVICE THAT HAS ARE MANUAL RESET; THE DEVICE THAT HAS MANUAL RESET; THE DEVICE THAT HAS MANUAL RESET; THE DEVICE THAT HAS RESET; THE DEVICE THAT HAS RESET; THE DEVICE THAT HAS THE DEVICE THAT HAS THE DEVICE THAT HAS DEVICE THAT HAS DEVICE THAT HAS THAT HAS THAT HAS HAS HAS TRIPPED MUST BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MUST BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MUST BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING RESET BEFORE RESTARTING THE AIR HANDLING RESET BEFORE RESTARTING THE AIR HANDLING BEFORE RESTARTING THE AIR HANDLING BEFORE RESTARTING THE AIR HANDLING RESTARTING THE AIR HANDLING RESTARTING THE AIR HANDLING THE AIR HANDLING THE AIR HANDLING AIR HANDLING AIR HANDLING HANDLING HANDLING UNIT IF A TEMPERATURE LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW A TEMPERATURE LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW A TEMPERATURE LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW TEMPERATURE LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW TEMPERATURE LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW LIMIT SWITCH SENSE A TEMPERATURE BELOW LIMIT SWITCH SENSE A TEMPERATURE BELOW SWITCH SENSE A TEMPERATURE BELOW SWITCH SENSE A TEMPERATURE BELOW SENSE A TEMPERATURE BELOW SENSE A TEMPERATURE BELOW A TEMPERATURE BELOW A TEMPERATURE BELOW TEMPERATURE BELOW TEMPERATURE BELOW BELOW BELOW SETPOINT THE SUPPLY FAN AND RETURN FAN WILL BE SHUTDOWN. IF A FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND A FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND A FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND CONTACT IS PROVIDED, THE SUPPLY FAN AND CONTACT IS PROVIDED, THE SUPPLY FAN AND IS PROVIDED, THE SUPPLY FAN AND IS PROVIDED, THE SUPPLY FAN AND PROVIDED, THE SUPPLY FAN AND PROVIDED, THE SUPPLY FAN AND THE SUPPLY FAN AND THE SUPPLY FAN AND SUPPLY FAN AND SUPPLY FAN AND FAN AND FAN AND AND AND RETURN FAN WILL BE SHUTDOWN WHEN TRIGGERED. SHUTDOWN WHEN THE UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM THE UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM THE UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM BY EITHER A STOP COMMAND OR SYSTEM BY EITHER A STOP COMMAND OR SYSTEM EITHER A STOP COMMAND OR SYSTEM EITHER A STOP COMMAND OR SYSTEM A STOP COMMAND OR SYSTEM A STOP COMMAND OR SYSTEM STOP COMMAND OR SYSTEM STOP COMMAND OR SYSTEM COMMAND OR SYSTEM COMMAND OR SYSTEM OR SYSTEM OR SYSTEM SYSTEM SYSTEM SAFETY THE UNIT WILL BE SET AS FOLLOWS: - SUPPLY FAN WILL BE OFF SUPPLY FAN WILL BE OFF - SUPPLY FAN VFD WILL BE COMMANDED TO ZERO PERCENT SUPPLY FAN VFD WILL BE COMMANDED TO ZERO PERCENT - OUTSIDE AIR DAMPER WILL CLOSE OUTSIDE AIR DAMPER WILL CLOSE - RETURN AIR DAMPER DAMPER WILL OPEN RETURN AIR DAMPER DAMPER WILL OPEN - EXHAUST AIR DAMPER WILL CLOSE EXHAUST AIR DAMPER WILL CLOSE - PREHEAT VALVE WEILL REMAIN IN CONTROL PREHEAT VALVE WEILL REMAIN IN CONTROL - COOLING VALVE WILL CLOSECOOLING VALVE WILL CLOSE
AutoCAD SHX Text
B/L
AutoCAD SHX Text
OUTDOOR AIR
AutoCAD SHX Text
A
AutoCAD SHX Text
H-703
AutoCAD SHX Text
CHILLED WATER RETURN
AutoCAD SHX Text
H-705
AutoCAD SHX Text
HOT WATER RETURN
AutoCAD SHX Text
A
AutoCAD SHX Text
E/P
AutoCAD SHX Text
B/L
AutoCAD SHX Text
RETURN AIR
AutoCAD SHX Text
A
AutoCAD SHX Text
DAMPER POSITION
AutoCAD SHX Text
KEYED NOTES 1. INSTALL NEW PROGRAMMABLE APPLICATION INSTALL NEW PROGRAMMABLE APPLICATION CONTROLLER. PROGRAM CONTROLLER PER EXISTING SEQUENCE OF OPERATION. 2. EX. PNEUMATIC ACTUATOR.EX. PNEUMATIC ACTUATOR.
AutoCAD SHX Text
-
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
Last saved by: KINSONJR Time: 3/6/2020 8:57:54 AM
AutoCAD SHX Text
XREFs: [CDMS_2234] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H700CHDI.dwg
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2
02
0
DIAGRAM 1
H-701
PROCESS AND INSTRUMENTATION DIAGRAM
AHU-2
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
LC-AHU-2
AutoCAD SHX Text
AHU-2
AutoCAD SHX Text
-
AutoCAD SHX Text
NTS
AutoCAD SHX Text
B/L
AutoCAD SHX Text
SUPPLY AIR
AutoCAD SHX Text
A
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
CO2
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
LL
AutoCAD SHX Text
FAN
AutoCAD SHX Text
M
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
XS
AutoCAD SHX Text
PE/PT
AutoCAD SHX Text
COOLING COIL
AutoCAD SHX Text
HEATING COIL
AutoCAD SHX Text
FILTER
AutoCAD SHX Text
VALVE POSITION
AutoCAD SHX Text
VALVE POSITION
AutoCAD SHX Text
DAMPER POSITION
AutoCAD SHX Text
RET AIR TEMP
AutoCAD SHX Text
MIX AIR TEMP
AutoCAD SHX Text
LOW LIMIT TEMP
AutoCAD SHX Text
RET AIR CO2
AutoCAD SHX Text
SUP AIR TEMP
AutoCAD SHX Text
SMOKE ALARM
AutoCAD SHX Text
STATIC PRESSURE
AutoCAD SHX Text
HS
AutoCAD SHX Text
HOA
AutoCAD SHX Text
DISPLAY
AutoCAD SHX Text
FAN ENABLE
AutoCAD SHX Text
SPEED
AutoCAD SHX Text
POWER (BY DIV. 26)
AutoCAD SHX Text
VFD
AutoCAD SHX Text
CS
AutoCAD SHX Text
FAN RUNNING
AutoCAD SHX Text
XS
AutoCAD SHX Text
SMOKE ALARM
AutoCAD SHX Text
MANUAL DAMPER
AutoCAD SHX Text
SEQUENCE OF OPERATION SUPPLY FAN START/STOP THE SUPPLY FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE SUPPLY FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE SUPPLY FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE BE STARTED ACCORDING TO THE SCHEDULE. IF THE BE STARTED ACCORDING TO THE SCHEDULE. IF THE STARTED ACCORDING TO THE SCHEDULE. IF THE STARTED ACCORDING TO THE SCHEDULE. IF THE ACCORDING TO THE SCHEDULE. IF THE ACCORDING TO THE SCHEDULE. IF THE TO THE SCHEDULE. IF THE TO THE SCHEDULE. IF THE THE SCHEDULE. IF THE THE SCHEDULE. IF THE SCHEDULE. IF THE SCHEDULE. IF THE IF THE IF THE THE THE SUPPLY FAN STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM FAN STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM FAN STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM DOES NOT MATCH THE COMMANDED VALUE, AN ALARM DOES NOT MATCH THE COMMANDED VALUE, AN ALARM NOT MATCH THE COMMANDED VALUE, AN ALARM NOT MATCH THE COMMANDED VALUE, AN ALARM MATCH THE COMMANDED VALUE, AN ALARM MATCH THE COMMANDED VALUE, AN ALARM THE COMMANDED VALUE, AN ALARM THE COMMANDED VALUE, AN ALARM COMMANDED VALUE, AN ALARM COMMANDED VALUE, AN ALARM VALUE, AN ALARM VALUE, AN ALARM AN ALARM AN ALARM ALARM ALARM WILL BE GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN BE GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN BE GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN WHEN THE SUPPLY FAN STATUS INDICATES THE FAN WHEN THE SUPPLY FAN STATUS INDICATES THE FAN THE SUPPLY FAN STATUS INDICATES THE FAN THE SUPPLY FAN STATUS INDICATES THE FAN SUPPLY FAN STATUS INDICATES THE FAN SUPPLY FAN STATUS INDICATES THE FAN FAN STATUS INDICATES THE FAN FAN STATUS INDICATES THE FAN STATUS INDICATES THE FAN STATUS INDICATES THE FAN INDICATES THE FAN INDICATES THE FAN THE FAN THE FAN FAN FAN STARTED, THE CONTROL SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY THE CONTROL SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY THE CONTROL SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY CONTROL SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY CONTROL SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY SEQUENCE WILL BE ENABLED. WHEN THE SUPPLY WILL BE ENABLED. WHEN THE SUPPLY WILL BE ENABLED. WHEN THE SUPPLY BE ENABLED. WHEN THE SUPPLY BE ENABLED. WHEN THE SUPPLY ENABLED. WHEN THE SUPPLY ENABLED. WHEN THE SUPPLY WHEN THE SUPPLY WHEN THE SUPPLY THE SUPPLY THE SUPPLY SUPPLY SUPPLY FAN STATUS HAS BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL STATUS HAS BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL STATUS HAS BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL HAS BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL HAS BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL BEEN PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL PROVEN, THE MINIMUM OUTDOOR AIR DAMPER WILL THE MINIMUM OUTDOOR AIR DAMPER WILL THE MINIMUM OUTDOOR AIR DAMPER WILL MINIMUM OUTDOOR AIR DAMPER WILL MINIMUM OUTDOOR AIR DAMPER WILL OUTDOOR AIR DAMPER WILL OUTDOOR AIR DAMPER WILL AIR DAMPER WILL AIR DAMPER WILL DAMPER WILL DAMPER WILL WILL WILL OPEN. STATIC PRESSURE CONTROL THE SUPPLY FAN WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC SUPPLY FAN WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC SUPPLY FAN WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC FAN WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC FAN WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC WILL MODULATE TO MAINTAIN THE DISCHARGE STATIC MODULATE TO MAINTAIN THE DISCHARGE STATIC MODULATE TO MAINTAIN THE DISCHARGE STATIC TO MAINTAIN THE DISCHARGE STATIC TO MAINTAIN THE DISCHARGE STATIC MAINTAIN THE DISCHARGE STATIC MAINTAIN THE DISCHARGE STATIC THE DISCHARGE STATIC THE DISCHARGE STATIC DISCHARGE STATIC DISCHARGE STATIC STATIC STATIC PRESSURE AT SETPOINT. DISCHARGE AIR CONTROL THE HEATING VALVE, MIXED AIR DAMPERS, AND COOLING VALVE WILL HEATING VALVE, MIXED AIR DAMPERS, AND COOLING VALVE WILL HEATING VALVE, MIXED AIR DAMPERS, AND COOLING VALVE WILL VALVE, MIXED AIR DAMPERS, AND COOLING VALVE WILL VALVE, MIXED AIR DAMPERS, AND COOLING VALVE WILL MIXED AIR DAMPERS, AND COOLING VALVE WILL MIXED AIR DAMPERS, AND COOLING VALVE WILL AIR DAMPERS, AND COOLING VALVE WILL AIR DAMPERS, AND COOLING VALVE WILL DAMPERS, AND COOLING VALVE WILL DAMPERS, AND COOLING VALVE WILL AND COOLING VALVE WILL AND COOLING VALVE WILL COOLING VALVE WILL COOLING VALVE WILL VALVE WILL VALVE WILL WILL WILL MODULATE IN SEQUENCE TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT IN SEQUENCE TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT IN SEQUENCE TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT SEQUENCE TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT SEQUENCE TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT MAINTAIN THE DISCHARGE AIR TEMPERATURE AT MAINTAIN THE DISCHARGE AIR TEMPERATURE AT THE DISCHARGE AIR TEMPERATURE AT THE DISCHARGE AIR TEMPERATURE AT DISCHARGE AIR TEMPERATURE AT DISCHARGE AIR TEMPERATURE AT AIR TEMPERATURE AT AIR TEMPERATURE AT TEMPERATURE AT TEMPERATURE AT AT AT SETPOINT. ECONOMIZER DRY BULB SWITCHOVER WHEN THE SHARED OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER THE SHARED OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER THE SHARED OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER SHARED OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER SHARED OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER OUTSIDE AIR TEMPERATURE IS BELOW THE SWITCHOVER AIR TEMPERATURE IS BELOW THE SWITCHOVER AIR TEMPERATURE IS BELOW THE SWITCHOVER TEMPERATURE IS BELOW THE SWITCHOVER TEMPERATURE IS BELOW THE SWITCHOVER IS BELOW THE SWITCHOVER IS BELOW THE SWITCHOVER BELOW THE SWITCHOVER BELOW THE SWITCHOVER THE SWITCHOVER THE SWITCHOVER SWITCHOVER SWITCHOVER SETPOINT, THE ECONOMIZER WILL BE ENABLED BY OPENING THE RELIEF AIR THE ECONOMIZER WILL BE ENABLED BY OPENING THE RELIEF AIR THE ECONOMIZER WILL BE ENABLED BY OPENING THE RELIEF AIR ECONOMIZER WILL BE ENABLED BY OPENING THE RELIEF AIR ECONOMIZER WILL BE ENABLED BY OPENING THE RELIEF AIR WILL BE ENABLED BY OPENING THE RELIEF AIR WILL BE ENABLED BY OPENING THE RELIEF AIR BE ENABLED BY OPENING THE RELIEF AIR BE ENABLED BY OPENING THE RELIEF AIR ENABLED BY OPENING THE RELIEF AIR ENABLED BY OPENING THE RELIEF AIR BY OPENING THE RELIEF AIR BY OPENING THE RELIEF AIR OPENING THE RELIEF AIR OPENING THE RELIEF AIR THE RELIEF AIR THE RELIEF AIR RELIEF AIR RELIEF AIR AIR AIR DAMPER AND MODULATING OUTSIDE AIR AND MIXED AIR DAMPERS TO AND MODULATING OUTSIDE AIR AND MIXED AIR DAMPERS TO AND MODULATING OUTSIDE AIR AND MIXED AIR DAMPERS TO MODULATING OUTSIDE AIR AND MIXED AIR DAMPERS TO MODULATING OUTSIDE AIR AND MIXED AIR DAMPERS TO OUTSIDE AIR AND MIXED AIR DAMPERS TO OUTSIDE AIR AND MIXED AIR DAMPERS TO AIR AND MIXED AIR DAMPERS TO AIR AND MIXED AIR DAMPERS TO AND MIXED AIR DAMPERS TO AND MIXED AIR DAMPERS TO MIXED AIR DAMPERS TO MIXED AIR DAMPERS TO AIR DAMPERS TO AIR DAMPERS TO DAMPERS TO DAMPERS TO TO TO MAINTAIN 55F MIXED AIR TEMPERATURE. WHEN THE SHARED OUTSIDE AIR 55F MIXED AIR TEMPERATURE. WHEN THE SHARED OUTSIDE AIR 55F MIXED AIR TEMPERATURE. WHEN THE SHARED OUTSIDE AIR MIXED AIR TEMPERATURE. WHEN THE SHARED OUTSIDE AIR MIXED AIR TEMPERATURE. WHEN THE SHARED OUTSIDE AIR AIR TEMPERATURE. WHEN THE SHARED OUTSIDE AIR AIR TEMPERATURE. WHEN THE SHARED OUTSIDE AIR TEMPERATURE. WHEN THE SHARED OUTSIDE AIR TEMPERATURE. WHEN THE SHARED OUTSIDE AIR WHEN THE SHARED OUTSIDE AIR WHEN THE SHARED OUTSIDE AIR THE SHARED OUTSIDE AIR THE SHARED OUTSIDE AIR SHARED OUTSIDE AIR SHARED OUTSIDE AIR OUTSIDE AIR OUTSIDE AIR AIR AIR TEMPERATURE RISES ABOVE THE SWITCHOVER SETPOINT PLUS A RISES ABOVE THE SWITCHOVER SETPOINT PLUS A RISES ABOVE THE SWITCHOVER SETPOINT PLUS A ABOVE THE SWITCHOVER SETPOINT PLUS A ABOVE THE SWITCHOVER SETPOINT PLUS A THE SWITCHOVER SETPOINT PLUS A THE SWITCHOVER SETPOINT PLUS A SWITCHOVER SETPOINT PLUS A SWITCHOVER SETPOINT PLUS A SETPOINT PLUS A SETPOINT PLUS A PLUS A PLUS A A A DIFFERENTIAL, THE ECONOMIZER WILL BE DISABLED. RETURN AIR QUALITY CONTROL WHEN THE RETURN AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS THE RETURN AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS THE RETURN AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS RETURN AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS RETURN AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS AIR CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS CO2 IS ABOVE SETPOINT, THE MIXING DAMPERS IS ABOVE SETPOINT, THE MIXING DAMPERS IS ABOVE SETPOINT, THE MIXING DAMPERS ABOVE SETPOINT, THE MIXING DAMPERS ABOVE SETPOINT, THE MIXING DAMPERS SETPOINT, THE MIXING DAMPERS SETPOINT, THE MIXING DAMPERS THE MIXING DAMPERS THE MIXING DAMPERS MIXING DAMPERS MIXING DAMPERS DAMPERS DAMPERS WILL MODULATE TO PROVIDE MORE OUTDOOR AIR. SAFETIES ALL OF THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS OF THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS OF THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS ARE MANUAL RESET; THE DEVICE THAT HAS ARE MANUAL RESET; THE DEVICE THAT HAS MANUAL RESET; THE DEVICE THAT HAS MANUAL RESET; THE DEVICE THAT HAS RESET; THE DEVICE THAT HAS RESET; THE DEVICE THAT HAS THE DEVICE THAT HAS THE DEVICE THAT HAS DEVICE THAT HAS DEVICE THAT HAS THAT HAS THAT HAS HAS HAS TRIPPED MUST BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MUST BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MUST BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING RESET BEFORE RESTARTING THE AIR HANDLING RESET BEFORE RESTARTING THE AIR HANDLING BEFORE RESTARTING THE AIR HANDLING BEFORE RESTARTING THE AIR HANDLING RESTARTING THE AIR HANDLING RESTARTING THE AIR HANDLING THE AIR HANDLING THE AIR HANDLING AIR HANDLING AIR HANDLING HANDLING HANDLING UNIT IF A TEMPERATURE LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW A TEMPERATURE LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW A TEMPERATURE LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW TEMPERATURE LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW TEMPERATURE LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW LOW LIMIT SWITCH SENSE A TEMPERATURE BELOW LIMIT SWITCH SENSE A TEMPERATURE BELOW LIMIT SWITCH SENSE A TEMPERATURE BELOW SWITCH SENSE A TEMPERATURE BELOW SWITCH SENSE A TEMPERATURE BELOW SENSE A TEMPERATURE BELOW SENSE A TEMPERATURE BELOW A TEMPERATURE BELOW A TEMPERATURE BELOW TEMPERATURE BELOW TEMPERATURE BELOW BELOW BELOW SETPOINT THE SUPPLY FAN AND RETURN FAN WILL BE SHUTDOWN. IF A FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND A FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND A FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN AND CONTACT IS PROVIDED, THE SUPPLY FAN AND CONTACT IS PROVIDED, THE SUPPLY FAN AND IS PROVIDED, THE SUPPLY FAN AND IS PROVIDED, THE SUPPLY FAN AND PROVIDED, THE SUPPLY FAN AND PROVIDED, THE SUPPLY FAN AND THE SUPPLY FAN AND THE SUPPLY FAN AND SUPPLY FAN AND SUPPLY FAN AND FAN AND FAN AND AND AND RETURN FAN WILL BE SHUTDOWN WHEN TRIGGERED. SHUTDOWN WHEN THE UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM THE UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM THE UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM BY EITHER A STOP COMMAND OR SYSTEM BY EITHER A STOP COMMAND OR SYSTEM EITHER A STOP COMMAND OR SYSTEM EITHER A STOP COMMAND OR SYSTEM A STOP COMMAND OR SYSTEM A STOP COMMAND OR SYSTEM STOP COMMAND OR SYSTEM STOP COMMAND OR SYSTEM COMMAND OR SYSTEM COMMAND OR SYSTEM OR SYSTEM OR SYSTEM SYSTEM SYSTEM SAFETY THE UNIT WILL BE SET AS FOLLOWS: - SUPPLY FAN WILL BE OFF SUPPLY FAN WILL BE OFF - SUPPLY FAN VFD WILL BE COMMANDED TO ZERO PERCENT SUPPLY FAN VFD WILL BE COMMANDED TO ZERO PERCENT - OUTSIDE AIR DAMPER WILL CLOSE OUTSIDE AIR DAMPER WILL CLOSE - RETURN AIR DAMPER DAMPER WILL OPEN RETURN AIR DAMPER DAMPER WILL OPEN - EXHAUST AIR DAMPER WILL CLOSE EXHAUST AIR DAMPER WILL CLOSE - PREHEAT VALVE WEILL REMAIN IN CONTROL PREHEAT VALVE WEILL REMAIN IN CONTROL - COOLING VALVE WILL CLOSECOOLING VALVE WILL CLOSE
AutoCAD SHX Text
OPEN/CLOSED
AutoCAD SHX Text
B/L
AutoCAD SHX Text
OUTDOOR AIR
AutoCAD SHX Text
A
AutoCAD SHX Text
A
AutoCAD SHX Text
E/P
AutoCAD SHX Text
H701CHDI.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
B/L
AutoCAD SHX Text
RETURN AIR
AutoCAD SHX Text
B/L
AutoCAD SHX Text
RELIEF AIR
AutoCAD SHX Text
A
AutoCAD SHX Text
A
AutoCAD SHX Text
DAMPER POSITION
AutoCAD SHX Text
KEYED NOTES 1. INSTALL NEW PROGRAMMABLE APPLICATION INSTALL NEW PROGRAMMABLE APPLICATION CONTROLLER. PROGRAM CONTROLLER PER EXISTING SEQUENCE OF OPERATION. 2. DEMOLISH EXISTING CO2 SENSOR AND REPLACE IN DEMOLISH EXISTING CO2 SENSOR AND REPLACE IN KIND OR EQUAL. (JCI MODEL CD-P00-00-0.) 3. EX. PNEUMATIC ACTUATOR.EX. PNEUMATIC ACTUATOR.
AutoCAD SHX Text
-
AutoCAD SHX Text
2
AutoCAD SHX Text
1
AutoCAD SHX Text
H-703
AutoCAD SHX Text
CHILLED WATER SUPPLY
AutoCAD SHX Text
H-705
AutoCAD SHX Text
HOT WATER SUPPLY
AutoCAD SHX Text
H-703
AutoCAD SHX Text
CHILLED WATER RETURN
AutoCAD SHX Text
H-705
AutoCAD SHX Text
HOT WATER RETURN
AutoCAD SHX Text
3
AutoCAD SHX Text
Last saved by: KINSONJR Time: 3/6/2020 8:58:30 AM
AutoCAD SHX Text
XREFs: [CDMS_2234] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H701CHDI.dwg
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2
02
0
H-702
PROCESS AND INSTRUMENTATION DIAGRAM
AC-1 & AC-5
DIAGRAM 1 DIAGRAM 2
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H702CHDI.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
LC-AC-1
AutoCAD SHX Text
AC-1
AutoCAD SHX Text
-
AutoCAD SHX Text
NTS
AutoCAD SHX Text
AC-5
AutoCAD SHX Text
-
AutoCAD SHX Text
NTS
AutoCAD SHX Text
COOLING COIL
AutoCAD SHX Text
VALVE POSITION
AutoCAD SHX Text
A
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
SA TEMP.
AutoCAD SHX Text
FAN
AutoCAD SHX Text
FAN ON/OFF
AutoCAD SHX Text
M
AutoCAD SHX Text
FILTER
AutoCAD SHX Text
B/L
AutoCAD SHX Text
SUPPLY AIR
AutoCAD SHX Text
XS
AutoCAD SHX Text
SMOKE ALARM
AutoCAD SHX Text
CS
AutoCAD SHX Text
FAN RUNNING
AutoCAD SHX Text
SEQUENCE OF OPERATION SUPPLY FAN START/STOP THE SUPPLY FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE SUPPLY FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE SUPPLY FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE BE STARTED ACCORDING TO THE SCHEDULE. IF THE BE STARTED ACCORDING TO THE SCHEDULE. IF THE STARTED ACCORDING TO THE SCHEDULE. IF THE STARTED ACCORDING TO THE SCHEDULE. IF THE ACCORDING TO THE SCHEDULE. IF THE ACCORDING TO THE SCHEDULE. IF THE TO THE SCHEDULE. IF THE TO THE SCHEDULE. IF THE THE SCHEDULE. IF THE THE SCHEDULE. IF THE SCHEDULE. IF THE SCHEDULE. IF THE IF THE IF THE THE THE SUPPLY FAN STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM FAN STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM FAN STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM DOES NOT MATCH THE COMMANDED VALUE, AN ALARM DOES NOT MATCH THE COMMANDED VALUE, AN ALARM NOT MATCH THE COMMANDED VALUE, AN ALARM NOT MATCH THE COMMANDED VALUE, AN ALARM MATCH THE COMMANDED VALUE, AN ALARM MATCH THE COMMANDED VALUE, AN ALARM THE COMMANDED VALUE, AN ALARM THE COMMANDED VALUE, AN ALARM COMMANDED VALUE, AN ALARM COMMANDED VALUE, AN ALARM VALUE, AN ALARM VALUE, AN ALARM AN ALARM AN ALARM ALARM ALARM WILL BE GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN BE GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN BE GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN WHEN THE SUPPLY FAN STATUS INDICATES THE FAN WHEN THE SUPPLY FAN STATUS INDICATES THE FAN THE SUPPLY FAN STATUS INDICATES THE FAN THE SUPPLY FAN STATUS INDICATES THE FAN SUPPLY FAN STATUS INDICATES THE FAN SUPPLY FAN STATUS INDICATES THE FAN FAN STATUS INDICATES THE FAN FAN STATUS INDICATES THE FAN STATUS INDICATES THE FAN STATUS INDICATES THE FAN INDICATES THE FAN INDICATES THE FAN THE FAN THE FAN FAN FAN STARTED, THE CONTROL SEQUENCE WILL BE ENABLED. DISCHARGE AIR CONTROL THE DISCHARGE AIR TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO DISCHARGE AIR TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO DISCHARGE AIR TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO AIR TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO AIR TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO SETPOINT WILL RESET AS NECESSARY TO SETPOINT WILL RESET AS NECESSARY TO WILL RESET AS NECESSARY TO WILL RESET AS NECESSARY TO RESET AS NECESSARY TO RESET AS NECESSARY TO AS NECESSARY TO AS NECESSARY TO NECESSARY TO NECESSARY TO TO TO MAINTAIN THE RETURN AIR TEMPERATURE SETPOINT AS SENSED BY THE THE RETURN AIR TEMPERATURE SETPOINT AS SENSED BY THE THE RETURN AIR TEMPERATURE SETPOINT AS SENSED BY THE RETURN AIR TEMPERATURE SETPOINT AS SENSED BY THE RETURN AIR TEMPERATURE SETPOINT AS SENSED BY THE AIR TEMPERATURE SETPOINT AS SENSED BY THE AIR TEMPERATURE SETPOINT AS SENSED BY THE TEMPERATURE SETPOINT AS SENSED BY THE TEMPERATURE SETPOINT AS SENSED BY THE SETPOINT AS SENSED BY THE SETPOINT AS SENSED BY THE AS SENSED BY THE AS SENSED BY THE SENSED BY THE SENSED BY THE BY THE BY THE THE THE ZONE TEMPERATURE SENSOR. THE COOLING VALVE WILL MODULATE IN TEMPERATURE SENSOR. THE COOLING VALVE WILL MODULATE IN TEMPERATURE SENSOR. THE COOLING VALVE WILL MODULATE IN SENSOR. THE COOLING VALVE WILL MODULATE IN SENSOR. THE COOLING VALVE WILL MODULATE IN THE COOLING VALVE WILL MODULATE IN THE COOLING VALVE WILL MODULATE IN COOLING VALVE WILL MODULATE IN COOLING VALVE WILL MODULATE IN VALVE WILL MODULATE IN VALVE WILL MODULATE IN WILL MODULATE IN WILL MODULATE IN MODULATE IN MODULATE IN IN IN SEQUENCE TO MAINTAIN THE DISCHARGE AIR TEMPERATURE AT SETPOINT. SAFETIES ALL OF THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS OF THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS OF THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS ARE MANUAL RESET; THE DEVICE THAT HAS ARE MANUAL RESET; THE DEVICE THAT HAS MANUAL RESET; THE DEVICE THAT HAS MANUAL RESET; THE DEVICE THAT HAS RESET; THE DEVICE THAT HAS RESET; THE DEVICE THAT HAS THE DEVICE THAT HAS THE DEVICE THAT HAS DEVICE THAT HAS DEVICE THAT HAS THAT HAS THAT HAS HAS HAS TRIPPED MUST BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MUST BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MUST BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING RESET BEFORE RESTARTING THE AIR HANDLING RESET BEFORE RESTARTING THE AIR HANDLING BEFORE RESTARTING THE AIR HANDLING BEFORE RESTARTING THE AIR HANDLING RESTARTING THE AIR HANDLING RESTARTING THE AIR HANDLING THE AIR HANDLING THE AIR HANDLING AIR HANDLING AIR HANDLING HANDLING HANDLING UNIT. SHUTDOWN WHEN THE UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM THE UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM THE UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM BY EITHER A STOP COMMAND OR SYSTEM BY EITHER A STOP COMMAND OR SYSTEM EITHER A STOP COMMAND OR SYSTEM EITHER A STOP COMMAND OR SYSTEM A STOP COMMAND OR SYSTEM A STOP COMMAND OR SYSTEM STOP COMMAND OR SYSTEM STOP COMMAND OR SYSTEM COMMAND OR SYSTEM COMMAND OR SYSTEM OR SYSTEM OR SYSTEM SYSTEM SYSTEM SAFETY THE UNIT WILL BE SET AS FOLLOWS: - SUPPLY FAN WILL BE OFF SUPPLY FAN WILL BE OFF - COOLING VALVE WILL CLOSECOOLING VALVE WILL CLOSE
AutoCAD SHX Text
AC-5A SEQUENCE OF OPERATION SUPPLY FAN START/STOP THE SUPPLY FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE SUPPLY FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE SUPPLY FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE FAN WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE WILL BE STARTED ACCORDING TO THE SCHEDULE. IF THE BE STARTED ACCORDING TO THE SCHEDULE. IF THE BE STARTED ACCORDING TO THE SCHEDULE. IF THE STARTED ACCORDING TO THE SCHEDULE. IF THE STARTED ACCORDING TO THE SCHEDULE. IF THE ACCORDING TO THE SCHEDULE. IF THE ACCORDING TO THE SCHEDULE. IF THE TO THE SCHEDULE. IF THE TO THE SCHEDULE. IF THE THE SCHEDULE. IF THE THE SCHEDULE. IF THE SCHEDULE. IF THE SCHEDULE. IF THE IF THE IF THE THE THE SUPPLY FAN STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM FAN STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM FAN STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM STATUS DOES NOT MATCH THE COMMANDED VALUE, AN ALARM DOES NOT MATCH THE COMMANDED VALUE, AN ALARM DOES NOT MATCH THE COMMANDED VALUE, AN ALARM NOT MATCH THE COMMANDED VALUE, AN ALARM NOT MATCH THE COMMANDED VALUE, AN ALARM MATCH THE COMMANDED VALUE, AN ALARM MATCH THE COMMANDED VALUE, AN ALARM THE COMMANDED VALUE, AN ALARM THE COMMANDED VALUE, AN ALARM COMMANDED VALUE, AN ALARM COMMANDED VALUE, AN ALARM VALUE, AN ALARM VALUE, AN ALARM AN ALARM AN ALARM ALARM ALARM WILL BE GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN BE GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN BE GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN GENERATED. WHEN THE SUPPLY FAN STATUS INDICATES THE FAN WHEN THE SUPPLY FAN STATUS INDICATES THE FAN WHEN THE SUPPLY FAN STATUS INDICATES THE FAN THE SUPPLY FAN STATUS INDICATES THE FAN THE SUPPLY FAN STATUS INDICATES THE FAN SUPPLY FAN STATUS INDICATES THE FAN SUPPLY FAN STATUS INDICATES THE FAN FAN STATUS INDICATES THE FAN FAN STATUS INDICATES THE FAN STATUS INDICATES THE FAN STATUS INDICATES THE FAN INDICATES THE FAN INDICATES THE FAN THE FAN THE FAN FAN FAN STARTED, THE CONTROL SEQUENCE WILL BE ENABLED. DISCHARGE AIR CONTROL THE DISCHARGE AIR TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO DISCHARGE AIR TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO DISCHARGE AIR TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO AIR TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO AIR TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO TEMPERATURE SETPOINT WILL RESET AS NECESSARY TO SETPOINT WILL RESET AS NECESSARY TO SETPOINT WILL RESET AS NECESSARY TO WILL RESET AS NECESSARY TO WILL RESET AS NECESSARY TO RESET AS NECESSARY TO RESET AS NECESSARY TO AS NECESSARY TO AS NECESSARY TO NECESSARY TO NECESSARY TO TO TO MAINTAIN THE RETURN AIR TEMPERATURE SETPOINT AS SENSED BY THE THE RETURN AIR TEMPERATURE SETPOINT AS SENSED BY THE THE RETURN AIR TEMPERATURE SETPOINT AS SENSED BY THE RETURN AIR TEMPERATURE SETPOINT AS SENSED BY THE RETURN AIR TEMPERATURE SETPOINT AS SENSED BY THE AIR TEMPERATURE SETPOINT AS SENSED BY THE AIR TEMPERATURE SETPOINT AS SENSED BY THE TEMPERATURE SETPOINT AS SENSED BY THE TEMPERATURE SETPOINT AS SENSED BY THE SETPOINT AS SENSED BY THE SETPOINT AS SENSED BY THE AS SENSED BY THE AS SENSED BY THE SENSED BY THE SENSED BY THE BY THE BY THE THE THE ZONE TEMPERATURE SENSOR. THE HEATING VALVE, AND THE COOLING VALVE TEMPERATURE SENSOR. THE HEATING VALVE, AND THE COOLING VALVE TEMPERATURE SENSOR. THE HEATING VALVE, AND THE COOLING VALVE SENSOR. THE HEATING VALVE, AND THE COOLING VALVE SENSOR. THE HEATING VALVE, AND THE COOLING VALVE THE HEATING VALVE, AND THE COOLING VALVE THE HEATING VALVE, AND THE COOLING VALVE HEATING VALVE, AND THE COOLING VALVE HEATING VALVE, AND THE COOLING VALVE VALVE, AND THE COOLING VALVE VALVE, AND THE COOLING VALVE AND THE COOLING VALVE AND THE COOLING VALVE THE COOLING VALVE THE COOLING VALVE COOLING VALVE COOLING VALVE VALVE VALVE WILL MODULATE IN SEQUENCE TO MAINTAIN THE DISCHARGE AIR MODULATE IN SEQUENCE TO MAINTAIN THE DISCHARGE AIR MODULATE IN SEQUENCE TO MAINTAIN THE DISCHARGE AIR IN SEQUENCE TO MAINTAIN THE DISCHARGE AIR IN SEQUENCE TO MAINTAIN THE DISCHARGE AIR SEQUENCE TO MAINTAIN THE DISCHARGE AIR SEQUENCE TO MAINTAIN THE DISCHARGE AIR TO MAINTAIN THE DISCHARGE AIR TO MAINTAIN THE DISCHARGE AIR MAINTAIN THE DISCHARGE AIR MAINTAIN THE DISCHARGE AIR THE DISCHARGE AIR THE DISCHARGE AIR DISCHARGE AIR DISCHARGE AIR AIR AIR TEMPERATURE AT SETPOINT. SAFETIES ALL OF THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS OF THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS OF THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS THE SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS SAFETY DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS DEVICES ARE MANUAL RESET; THE DEVICE THAT HAS ARE MANUAL RESET; THE DEVICE THAT HAS ARE MANUAL RESET; THE DEVICE THAT HAS MANUAL RESET; THE DEVICE THAT HAS MANUAL RESET; THE DEVICE THAT HAS RESET; THE DEVICE THAT HAS RESET; THE DEVICE THAT HAS THE DEVICE THAT HAS THE DEVICE THAT HAS DEVICE THAT HAS DEVICE THAT HAS THAT HAS THAT HAS HAS HAS TRIPPED MUST BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MUST BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MUST BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING BE MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING MANUALLY RESET BEFORE RESTARTING THE AIR HANDLING RESET BEFORE RESTARTING THE AIR HANDLING RESET BEFORE RESTARTING THE AIR HANDLING BEFORE RESTARTING THE AIR HANDLING BEFORE RESTARTING THE AIR HANDLING RESTARTING THE AIR HANDLING RESTARTING THE AIR HANDLING THE AIR HANDLING THE AIR HANDLING AIR HANDLING AIR HANDLING HANDLING HANDLING UNIT. IF A TEMPERATURE LOW LIMIT SWITCH SENSES A TEMPERATURE BELOW A TEMPERATURE LOW LIMIT SWITCH SENSES A TEMPERATURE BELOW A TEMPERATURE LOW LIMIT SWITCH SENSES A TEMPERATURE BELOW TEMPERATURE LOW LIMIT SWITCH SENSES A TEMPERATURE BELOW TEMPERATURE LOW LIMIT SWITCH SENSES A TEMPERATURE BELOW LOW LIMIT SWITCH SENSES A TEMPERATURE BELOW LOW LIMIT SWITCH SENSES A TEMPERATURE BELOW LIMIT SWITCH SENSES A TEMPERATURE BELOW LIMIT SWITCH SENSES A TEMPERATURE BELOW SWITCH SENSES A TEMPERATURE BELOW SWITCH SENSES A TEMPERATURE BELOW SENSES A TEMPERATURE BELOW SENSES A TEMPERATURE BELOW A TEMPERATURE BELOW A TEMPERATURE BELOW TEMPERATURE BELOW TEMPERATURE BELOW BELOW BELOW SETPOINT THE SUPPLY FAN WILL BE SHUTDOWN. IF A FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN WILL A FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN WILL A FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN WILL FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN WILL FIRE ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN WILL ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN WILL ALARM SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN WILL SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN WILL SHUTDOWN CONTACT IS PROVIDED, THE SUPPLY FAN WILL CONTACT IS PROVIDED, THE SUPPLY FAN WILL CONTACT IS PROVIDED, THE SUPPLY FAN WILL IS PROVIDED, THE SUPPLY FAN WILL IS PROVIDED, THE SUPPLY FAN WILL PROVIDED, THE SUPPLY FAN WILL PROVIDED, THE SUPPLY FAN WILL THE SUPPLY FAN WILL THE SUPPLY FAN WILL SUPPLY FAN WILL SUPPLY FAN WILL FAN WILL FAN WILL WILL WILL BE SHUTDOWN WHEN TRIGGERED. SHUTDOWN WHEN THE UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM THE UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM THE UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM UNIT IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM IS SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM SHUTDOWN BY EITHER A STOP COMMAND OR SYSTEM BY EITHER A STOP COMMAND OR SYSTEM BY EITHER A STOP COMMAND OR SYSTEM EITHER A STOP COMMAND OR SYSTEM EITHER A STOP COMMAND OR SYSTEM A STOP COMMAND OR SYSTEM A STOP COMMAND OR SYSTEM STOP COMMAND OR SYSTEM STOP COMMAND OR SYSTEM COMMAND OR SYSTEM COMMAND OR SYSTEM OR SYSTEM OR SYSTEM SYSTEM SYSTEM SAFETY THE UNIT WILL BE SET AS FOLLOWS: - SUPPLY FAN WILL BE OFF SUPPLY FAN WILL BE OFF - OUTSIDE AIR DAMPER WILL CLOSE OUTSIDE AIR DAMPER WILL CLOSE - COOLING VALVE WILL CLOSE COOLING VALVE WILL CLOSE - HEATING VALVE WILL CLOSEHEATING VALVE WILL CLOSE
AutoCAD SHX Text
B/L
AutoCAD SHX Text
RETURN AIR
AutoCAD SHX Text
MS
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
RA TEMP.
AutoCAD SHX Text
KEYED NOTES 1. INSTALL NEW APPLICATION SPECIFIC CONTROLLER. INSTALL NEW APPLICATION SPECIFIC CONTROLLER. PROGRAM CONTROLLER PER EXISTING SEQUENCE OF OPERATION. 2. INSTALL LOW LIMIT TEMPERATURE SWITCH.INSTALL LOW LIMIT TEMPERATURE SWITCH.
AutoCAD SHX Text
-
AutoCAD SHX Text
1
AutoCAD SHX Text
KEYED NOTES 1. SEQUENCE OF OPERATION AND DIAGRAM ARE SEQUENCE OF OPERATION AND DIAGRAM ARE TYPICAL FOR THE FOLLOWING PIECES OF EQUIPMENT: AC-2, AC-3, AC-4, AC-6, AC-8, AC-2, AC-3, AC-4, AC-6, AC-8, AC-9, AC-10.
AutoCAD SHX Text
LC-AC-5
AutoCAD SHX Text
COOLING COIL
AutoCAD SHX Text
VALVE POSITION
AutoCAD SHX Text
A
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
SA TEMP.
AutoCAD SHX Text
FAN
AutoCAD SHX Text
FAN ON/OFF
AutoCAD SHX Text
M
AutoCAD SHX Text
FILTER
AutoCAD SHX Text
B/L
AutoCAD SHX Text
SUPPLY AIR
AutoCAD SHX Text
XS
AutoCAD SHX Text
SMOKE ALARM
AutoCAD SHX Text
CS
AutoCAD SHX Text
FAN RUNNING
AutoCAD SHX Text
B/L
AutoCAD SHX Text
RETURN AIR
AutoCAD SHX Text
MS
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
RA TEMP.
AutoCAD SHX Text
1
AutoCAD SHX Text
HEATING COIL
AutoCAD SHX Text
A
AutoCAD SHX Text
VALVE POSITION
AutoCAD SHX Text
A
AutoCAD SHX Text
B/L
AutoCAD SHX Text
OUTSIDE AIR
AutoCAD SHX Text
VALVE POSITION
AutoCAD SHX Text
H-703
AutoCAD SHX Text
CHILLED WATER SUPPLY
AutoCAD SHX Text
H-705
AutoCAD SHX Text
HOT WATER SUPPLY
AutoCAD SHX Text
H-703
AutoCAD SHX Text
CHILLED WATER RETURN
AutoCAD SHX Text
H-705
AutoCAD SHX Text
HOT WATER RETURN
AutoCAD SHX Text
H-703
AutoCAD SHX Text
CHILLED WATER SUPPLY
AutoCAD SHX Text
H-703
AutoCAD SHX Text
CHILLED WATER RETURN
AutoCAD SHX Text
TS
AutoCAD SHX Text
TEMPERATURE
AutoCAD SHX Text
2
AutoCAD SHX Text
Last saved by: KINSONJR Time: 3/6/2020 9:02:59 AM
AutoCAD SHX Text
XREFs: [CDMS_2234] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H702CHDI.dwg
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2020
H-703
PROCESS AND INSTRUMENTATION DIAGRAM
CHILLED WATER SYSTEM
DIAGRAM A
DIAGRAM B
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H703CHDI.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
CHILLED WATER SYSTEM
AutoCAD SHX Text
NTS
AutoCAD SHX Text
-
AutoCAD SHX Text
H-700,701,702
AutoCAD SHX Text
CHILLED WATER RETURN
AutoCAD SHX Text
H-700,701,702
AutoCAD SHX Text
CHILLED WATER SUPPLY
AutoCAD SHX Text
OUTSIDE AIR TEMP.
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
P-1
AutoCAD SHX Text
M
AutoCAD SHX Text
P-2
AutoCAD SHX Text
M
AutoCAD SHX Text
HS
AutoCAD SHX Text
HOA
AutoCAD SHX Text
DISPLAY
AutoCAD SHX Text
POWER (BY DIV. 26)
AutoCAD SHX Text
VFD
AutoCAD SHX Text
SPEED
AutoCAD SHX Text
PUMP RUNNING
AutoCAD SHX Text
HS
AutoCAD SHX Text
HOA
AutoCAD SHX Text
DISPLAY
AutoCAD SHX Text
POWER (BY DIV. 26)
AutoCAD SHX Text
VFD
AutoCAD SHX Text
PUMP ENABLE
AutoCAD SHX Text
SPEED
AutoCAD SHX Text
PUMP RUNNING
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
CHWS TEMP.
AutoCAD SHX Text
P-5
AutoCAD SHX Text
M
AutoCAD SHX Text
CS
AutoCAD SHX Text
MS
AutoCAD SHX Text
PUMP ON/OFF
AutoCAD SHX Text
PUMP RUNNING
AutoCAD SHX Text
PUMP ENABLE
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
CHWS TEMP.
AutoCAD SHX Text
PE/PT
AutoCAD SHX Text
CS
AutoCAD SHX Text
CS
AutoCAD SHX Text
CHILLED WATER DIFF. PRESSURE
AutoCAD SHX Text
CHILLER SYSTEM SEQUENCE OF OPERATION CHILLER CONTROL THE CHILLER SYSTEM WILL BE ENABLED WHEN THE OUTSIDE CHILLER SYSTEM WILL BE ENABLED WHEN THE OUTSIDE CHILLER SYSTEM WILL BE ENABLED WHEN THE OUTSIDE SYSTEM WILL BE ENABLED WHEN THE OUTSIDE SYSTEM WILL BE ENABLED WHEN THE OUTSIDE WILL BE ENABLED WHEN THE OUTSIDE WILL BE ENABLED WHEN THE OUTSIDE BE ENABLED WHEN THE OUTSIDE BE ENABLED WHEN THE OUTSIDE ENABLED WHEN THE OUTSIDE ENABLED WHEN THE OUTSIDE WHEN THE OUTSIDE WHEN THE OUTSIDE THE OUTSIDE THE OUTSIDE OUTSIDE OUTSIDE AIR TEMPERATURE RISES ABOVE THE SYSTEM ENABLE TEMPERATURE RISES ABOVE THE SYSTEM ENABLE TEMPERATURE RISES ABOVE THE SYSTEM ENABLE RISES ABOVE THE SYSTEM ENABLE RISES ABOVE THE SYSTEM ENABLE ABOVE THE SYSTEM ENABLE ABOVE THE SYSTEM ENABLE THE SYSTEM ENABLE THE SYSTEM ENABLE SYSTEM ENABLE SYSTEM ENABLE ENABLE ENABLE SETPOINT. IF THE OUTSIDE AIR TEMPERATURE FALLS BELOW IF THE OUTSIDE AIR TEMPERATURE FALLS BELOW IF THE OUTSIDE AIR TEMPERATURE FALLS BELOW THE OUTSIDE AIR TEMPERATURE FALLS BELOW THE OUTSIDE AIR TEMPERATURE FALLS BELOW OUTSIDE AIR TEMPERATURE FALLS BELOW OUTSIDE AIR TEMPERATURE FALLS BELOW AIR TEMPERATURE FALLS BELOW AIR TEMPERATURE FALLS BELOW TEMPERATURE FALLS BELOW TEMPERATURE FALLS BELOW FALLS BELOW FALLS BELOW BELOW BELOW THIS SETPOINT PLUS A DIFFERENTIAL, THE CHILLER SYSTEM SETPOINT PLUS A DIFFERENTIAL, THE CHILLER SYSTEM SETPOINT PLUS A DIFFERENTIAL, THE CHILLER SYSTEM PLUS A DIFFERENTIAL, THE CHILLER SYSTEM PLUS A DIFFERENTIAL, THE CHILLER SYSTEM A DIFFERENTIAL, THE CHILLER SYSTEM A DIFFERENTIAL, THE CHILLER SYSTEM DIFFERENTIAL, THE CHILLER SYSTEM DIFFERENTIAL, THE CHILLER SYSTEM THE CHILLER SYSTEM THE CHILLER SYSTEM CHILLER SYSTEM CHILLER SYSTEM SYSTEM SYSTEM WILL BE DISABLED. WHEN ENABLED, CIRCULATING PUMP P-5, BE DISABLED. WHEN ENABLED, CIRCULATING PUMP P-5, BE DISABLED. WHEN ENABLED, CIRCULATING PUMP P-5, DISABLED. WHEN ENABLED, CIRCULATING PUMP P-5, DISABLED. WHEN ENABLED, CIRCULATING PUMP P-5, WHEN ENABLED, CIRCULATING PUMP P-5, WHEN ENABLED, CIRCULATING PUMP P-5, ENABLED, CIRCULATING PUMP P-5, ENABLED, CIRCULATING PUMP P-5, CIRCULATING PUMP P-5, CIRCULATING PUMP P-5, PUMP P-5, PUMP P-5, P-5, P-5, ONE CHILLED WATER PUMP, AND ONE CONDENSER WATER CHILLED WATER PUMP, AND ONE CONDENSER WATER CHILLED WATER PUMP, AND ONE CONDENSER WATER WATER PUMP, AND ONE CONDENSER WATER WATER PUMP, AND ONE CONDENSER WATER PUMP, AND ONE CONDENSER WATER PUMP, AND ONE CONDENSER WATER AND ONE CONDENSER WATER AND ONE CONDENSER WATER ONE CONDENSER WATER ONE CONDENSER WATER CONDENSER WATER CONDENSER WATER WATER WATER PUMP WILL BE STARTED. WHEN PROOF OF PUMP FLOW IS PROVEN, THE CHILLER WILL PROOF OF PUMP FLOW IS PROVEN, THE CHILLER WILL PROOF OF PUMP FLOW IS PROVEN, THE CHILLER WILL OF PUMP FLOW IS PROVEN, THE CHILLER WILL OF PUMP FLOW IS PROVEN, THE CHILLER WILL PUMP FLOW IS PROVEN, THE CHILLER WILL PUMP FLOW IS PROVEN, THE CHILLER WILL FLOW IS PROVEN, THE CHILLER WILL FLOW IS PROVEN, THE CHILLER WILL IS PROVEN, THE CHILLER WILL IS PROVEN, THE CHILLER WILL PROVEN, THE CHILLER WILL PROVEN, THE CHILLER WILL THE CHILLER WILL THE CHILLER WILL CHILLER WILL CHILLER WILL WILL WILL BE ENABLED. UPON RECEIVING INTERNAL FLOW STATUS, THE ENABLED. UPON RECEIVING INTERNAL FLOW STATUS, THE ENABLED. UPON RECEIVING INTERNAL FLOW STATUS, THE UPON RECEIVING INTERNAL FLOW STATUS, THE UPON RECEIVING INTERNAL FLOW STATUS, THE RECEIVING INTERNAL FLOW STATUS, THE RECEIVING INTERNAL FLOW STATUS, THE INTERNAL FLOW STATUS, THE INTERNAL FLOW STATUS, THE FLOW STATUS, THE FLOW STATUS, THE STATUS, THE STATUS, THE THE THE CHILLER WILL, VIA ITS INTERNAL CONTROLS, MAINTAIN THE WILL, VIA ITS INTERNAL CONTROLS, MAINTAIN THE WILL, VIA ITS INTERNAL CONTROLS, MAINTAIN THE VIA ITS INTERNAL CONTROLS, MAINTAIN THE VIA ITS INTERNAL CONTROLS, MAINTAIN THE ITS INTERNAL CONTROLS, MAINTAIN THE ITS INTERNAL CONTROLS, MAINTAIN THE INTERNAL CONTROLS, MAINTAIN THE INTERNAL CONTROLS, MAINTAIN THE CONTROLS, MAINTAIN THE CONTROLS, MAINTAIN THE MAINTAIN THE MAINTAIN THE THE THE CHILLED WATER SUPPLY TEMPERATURE AT SETPOINT. WHEN DISABLED BY OUTDOOR AIR, THE CHILLER WILL BE DISABLED BY OUTDOOR AIR, THE CHILLER WILL BE DISABLED BY OUTDOOR AIR, THE CHILLER WILL BE BY OUTDOOR AIR, THE CHILLER WILL BE BY OUTDOOR AIR, THE CHILLER WILL BE OUTDOOR AIR, THE CHILLER WILL BE OUTDOOR AIR, THE CHILLER WILL BE AIR, THE CHILLER WILL BE AIR, THE CHILLER WILL BE THE CHILLER WILL BE THE CHILLER WILL BE CHILLER WILL BE CHILLER WILL BE WILL BE WILL BE BE BE DISABLED, AND AFTER A FIVE MINUTE PUMP DOWN DELAY, ALL AND AFTER A FIVE MINUTE PUMP DOWN DELAY, ALL AND AFTER A FIVE MINUTE PUMP DOWN DELAY, ALL AFTER A FIVE MINUTE PUMP DOWN DELAY, ALL AFTER A FIVE MINUTE PUMP DOWN DELAY, ALL A FIVE MINUTE PUMP DOWN DELAY, ALL A FIVE MINUTE PUMP DOWN DELAY, ALL FIVE MINUTE PUMP DOWN DELAY, ALL FIVE MINUTE PUMP DOWN DELAY, ALL MINUTE PUMP DOWN DELAY, ALL MINUTE PUMP DOWN DELAY, ALL PUMP DOWN DELAY, ALL PUMP DOWN DELAY, ALL DOWN DELAY, ALL DOWN DELAY, ALL DELAY, ALL DELAY, ALL ALL ALL PUMPS WILL BE SHUT OFF. CHILLED WATER PUMP CONTROL THE OPERATOR SELECTED LEAD CHILLED WATER PUMP, WILL OPERATOR SELECTED LEAD CHILLED WATER PUMP, WILL OPERATOR SELECTED LEAD CHILLED WATER PUMP, WILL SELECTED LEAD CHILLED WATER PUMP, WILL SELECTED LEAD CHILLED WATER PUMP, WILL LEAD CHILLED WATER PUMP, WILL LEAD CHILLED WATER PUMP, WILL CHILLED WATER PUMP, WILL CHILLED WATER PUMP, WILL WATER PUMP, WILL WATER PUMP, WILL PUMP, WILL PUMP, WILL WILL WILL AUTOMATICALLY START. WHEN ENABLED, THE PUMPS WILL START. WHEN ENABLED, THE PUMPS WILL START. WHEN ENABLED, THE PUMPS WILL WHEN ENABLED, THE PUMPS WILL WHEN ENABLED, THE PUMPS WILL ENABLED, THE PUMPS WILL ENABLED, THE PUMPS WILL THE PUMPS WILL THE PUMPS WILL PUMPS WILL PUMPS WILL WILL WILL START AND RUN CONTINUOUSLY. IF FOR ANY REASON ITS AND RUN CONTINUOUSLY. IF FOR ANY REASON ITS AND RUN CONTINUOUSLY. IF FOR ANY REASON ITS RUN CONTINUOUSLY. IF FOR ANY REASON ITS RUN CONTINUOUSLY. IF FOR ANY REASON ITS CONTINUOUSLY. IF FOR ANY REASON ITS CONTINUOUSLY. IF FOR ANY REASON ITS IF FOR ANY REASON ITS IF FOR ANY REASON ITS FOR ANY REASON ITS FOR ANY REASON ITS ANY REASON ITS ANY REASON ITS REASON ITS REASON ITS ITS ITS STATUS DOES NOT MATCH ITS COMMANDED VALUE AN ALARM DOES NOT MATCH ITS COMMANDED VALUE AN ALARM DOES NOT MATCH ITS COMMANDED VALUE AN ALARM NOT MATCH ITS COMMANDED VALUE AN ALARM NOT MATCH ITS COMMANDED VALUE AN ALARM MATCH ITS COMMANDED VALUE AN ALARM MATCH ITS COMMANDED VALUE AN ALARM ITS COMMANDED VALUE AN ALARM ITS COMMANDED VALUE AN ALARM COMMANDED VALUE AN ALARM COMMANDED VALUE AN ALARM VALUE AN ALARM VALUE AN ALARM AN ALARM AN ALARM ALARM ALARM WILL BE GENERATED. THE LAG PUMP WILL START OF THE LEAD PUMP IS IN ALARM. LAG PUMP WILL START OF THE LEAD PUMP IS IN ALARM. LAG PUMP WILL START OF THE LEAD PUMP IS IN ALARM. PUMP WILL START OF THE LEAD PUMP IS IN ALARM. PUMP WILL START OF THE LEAD PUMP IS IN ALARM. WILL START OF THE LEAD PUMP IS IN ALARM. WILL START OF THE LEAD PUMP IS IN ALARM. START OF THE LEAD PUMP IS IN ALARM. START OF THE LEAD PUMP IS IN ALARM. OF THE LEAD PUMP IS IN ALARM. OF THE LEAD PUMP IS IN ALARM. THE LEAD PUMP IS IN ALARM. THE LEAD PUMP IS IN ALARM. LEAD PUMP IS IN ALARM. LEAD PUMP IS IN ALARM. PUMP IS IN ALARM. PUMP IS IN ALARM. IS IN ALARM. IS IN ALARM. IN ALARM. IN ALARM. ALARM. ALARM. THE RUNNING PUMP SPEED WILL BE MODULATED AS RUNNING PUMP SPEED WILL BE MODULATED AS RUNNING PUMP SPEED WILL BE MODULATED AS PUMP SPEED WILL BE MODULATED AS PUMP SPEED WILL BE MODULATED AS SPEED WILL BE MODULATED AS SPEED WILL BE MODULATED AS WILL BE MODULATED AS WILL BE MODULATED AS BE MODULATED AS BE MODULATED AS MODULATED AS MODULATED AS AS AS NECESSARY TO MAINTAIN THE DESIRED CHILLED WATER SYSTEM TO MAINTAIN THE DESIRED CHILLED WATER SYSTEM TO MAINTAIN THE DESIRED CHILLED WATER SYSTEM MAINTAIN THE DESIRED CHILLED WATER SYSTEM MAINTAIN THE DESIRED CHILLED WATER SYSTEM THE DESIRED CHILLED WATER SYSTEM THE DESIRED CHILLED WATER SYSTEM DESIRED CHILLED WATER SYSTEM DESIRED CHILLED WATER SYSTEM CHILLED WATER SYSTEM CHILLED WATER SYSTEM WATER SYSTEM WATER SYSTEM SYSTEM SYSTEM DIFFERENTIAL PRESSURE. PUMP CYCLING THE LEAD PUMP SHALL BE CHANGED OVER ON A WEEKLY LEAD PUMP SHALL BE CHANGED OVER ON A WEEKLY LEAD PUMP SHALL BE CHANGED OVER ON A WEEKLY PUMP SHALL BE CHANGED OVER ON A WEEKLY PUMP SHALL BE CHANGED OVER ON A WEEKLY SHALL BE CHANGED OVER ON A WEEKLY SHALL BE CHANGED OVER ON A WEEKLY BE CHANGED OVER ON A WEEKLY BE CHANGED OVER ON A WEEKLY CHANGED OVER ON A WEEKLY CHANGED OVER ON A WEEKLY OVER ON A WEEKLY OVER ON A WEEKLY ON A WEEKLY ON A WEEKLY A WEEKLY A WEEKLY WEEKLY WEEKLY BASIS. THE OPERATOR SHALL HAVE CAPABILITY OF SELECTING THE OPERATOR SHALL HAVE CAPABILITY OF SELECTING THE OPERATOR SHALL HAVE CAPABILITY OF SELECTING THE OPERATOR SHALL HAVE CAPABILITY OF SELECTING OPERATOR SHALL HAVE CAPABILITY OF SELECTING OPERATOR SHALL HAVE CAPABILITY OF SELECTING SHALL HAVE CAPABILITY OF SELECTING SHALL HAVE CAPABILITY OF SELECTING HAVE CAPABILITY OF SELECTING HAVE CAPABILITY OF SELECTING CAPABILITY OF SELECTING CAPABILITY OF SELECTING OF SELECTING OF SELECTING SELECTING SELECTING THE DAY AND TIME THE CHANGEOVER OCCURS, AND THE DAY AND TIME THE CHANGEOVER OCCURS, AND THE DAY AND TIME THE CHANGEOVER OCCURS, AND THE AND TIME THE CHANGEOVER OCCURS, AND THE AND TIME THE CHANGEOVER OCCURS, AND THE TIME THE CHANGEOVER OCCURS, AND THE TIME THE CHANGEOVER OCCURS, AND THE THE CHANGEOVER OCCURS, AND THE THE CHANGEOVER OCCURS, AND THE CHANGEOVER OCCURS, AND THE CHANGEOVER OCCURS, AND THE OCCURS, AND THE OCCURS, AND THE AND THE AND THE THE THE CAPABILITY OF DISABLING THE CHANGEOVER. COMPRESSOR PRESSURE MONITORING WHEN THE PRESSURE SWITCH (5 PSIG ADJ) IS BELOW THE PRESSURE SWITCH (5 PSIG ADJ) IS BELOW THE PRESSURE SWITCH (5 PSIG ADJ) IS BELOW PRESSURE SWITCH (5 PSIG ADJ) IS BELOW PRESSURE SWITCH (5 PSIG ADJ) IS BELOW SWITCH (5 PSIG ADJ) IS BELOW SWITCH (5 PSIG ADJ) IS BELOW (5 PSIG ADJ) IS BELOW (5 PSIG ADJ) IS BELOW PSIG ADJ) IS BELOW PSIG ADJ) IS BELOW ADJ) IS BELOW ADJ) IS BELOW IS BELOW IS BELOW BELOW BELOW SETPOINT FOR MORE THAN 5 MINUTES AN ALARM SHALL BE FOR MORE THAN 5 MINUTES AN ALARM SHALL BE FOR MORE THAN 5 MINUTES AN ALARM SHALL BE MORE THAN 5 MINUTES AN ALARM SHALL BE MORE THAN 5 MINUTES AN ALARM SHALL BE THAN 5 MINUTES AN ALARM SHALL BE THAN 5 MINUTES AN ALARM SHALL BE 5 MINUTES AN ALARM SHALL BE 5 MINUTES AN ALARM SHALL BE MINUTES AN ALARM SHALL BE MINUTES AN ALARM SHALL BE AN ALARM SHALL BE AN ALARM SHALL BE ALARM SHALL BE ALARM SHALL BE SHALL BE SHALL BE BE BE GENERATED.
AutoCAD SHX Text
H-704
AutoCAD SHX Text
CONDENSER WATER SUPPLY
AutoCAD SHX Text
KEYED NOTES 1. INSTALL NEW PROGRAMMABLE APPLICATION INSTALL NEW PROGRAMMABLE APPLICATION CONTROLLER. PROGRAM CONTROLLER PER EXISTING SEQUENCE OF OPERATION. 2. INSTALL PRESSURE GAGE AND PRESSURE SWITCH INSTALL PRESSURE GAGE AND PRESSURE SWITCH ON COMPRESSED AIR TUBING.
AutoCAD SHX Text
-
AutoCAD SHX Text
CHILLER
AutoCAD SHX Text
H-704
AutoCAD SHX Text
CONDENSER WATER RETURN
AutoCAD SHX Text
LC-CHW-1
AutoCAD SHX Text
1
AutoCAD SHX Text
B/L
AutoCAD SHX Text
AMBIENT AIR
AutoCAD SHX Text
B/L
AutoCAD SHX Text
COMPRESSED AIR
AutoCAD SHX Text
PNEUMATIC CONTROLS COMPRESSOR
AutoCAD SHX Text
NTS
AutoCAD SHX Text
-
AutoCAD SHX Text
AIR COMPRESSOR
AutoCAD SHX Text
PS
AutoCAD SHX Text
PI
AutoCAD SHX Text
LOW PRESSURE
AutoCAD SHX Text
2
AutoCAD SHX Text
Last saved by: FLAHERTYDM Time: 3/6/2020 12:36:32 PM
AutoCAD SHX Text
XREFs: [CDMS_2234] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H703CHDI.dwg
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2
02
0
H-704
PROCESS AND INSTRUMENTATION DIAGRAM
CONDENSER WATER SYSTEM
DIAGRAM A
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H704CHDI.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
CONDENSER WATER SYSTEM
AutoCAD SHX Text
NTS
AutoCAD SHX Text
-
AutoCAD SHX Text
H-703
AutoCAD SHX Text
CHILLED WATER RETURN
AutoCAD SHX Text
H-703
AutoCAD SHX Text
CHILLED WATER SUPPLY
AutoCAD SHX Text
P-1
AutoCAD SHX Text
M
AutoCAD SHX Text
P-2
AutoCAD SHX Text
M
AutoCAD SHX Text
POWER (BY DIV. 26)
AutoCAD SHX Text
SPEED
AutoCAD SHX Text
PUMP RUNNING
AutoCAD SHX Text
FAN ENABLE
AutoCAD SHX Text
CONDENSER WATER SYSTEM SEQUENCE OF OPERATION THE CONDENSER WATER SYSTEM SHALL BE ENABLED WHEN CONDENSER WATER SYSTEM SHALL BE ENABLED WHEN CONDENSER WATER SYSTEM SHALL BE ENABLED WHEN WATER SYSTEM SHALL BE ENABLED WHEN WATER SYSTEM SHALL BE ENABLED WHEN SYSTEM SHALL BE ENABLED WHEN SYSTEM SHALL BE ENABLED WHEN SHALL BE ENABLED WHEN SHALL BE ENABLED WHEN BE ENABLED WHEN BE ENABLED WHEN ENABLED WHEN ENABLED WHEN WHEN WHEN THE CHILLERS ARE ENABLED. CONDENSER WATER PUMP CONTROL THE OPERATOR SELECTED LEAD CONDENSER WATER PUMP OPERATOR SELECTED LEAD CONDENSER WATER PUMP OPERATOR SELECTED LEAD CONDENSER WATER PUMP SELECTED LEAD CONDENSER WATER PUMP SELECTED LEAD CONDENSER WATER PUMP LEAD CONDENSER WATER PUMP LEAD CONDENSER WATER PUMP CONDENSER WATER PUMP CONDENSER WATER PUMP WATER PUMP WATER PUMP PUMP PUMP WILL AUTOMATICALLY START. WHEN ENABLED, THE PUMPS WILL AUTOMATICALLY START. WHEN ENABLED, THE PUMPS WILL AUTOMATICALLY START. WHEN ENABLED, THE PUMPS WILL START. WHEN ENABLED, THE PUMPS WILL START. WHEN ENABLED, THE PUMPS WILL WHEN ENABLED, THE PUMPS WILL WHEN ENABLED, THE PUMPS WILL ENABLED, THE PUMPS WILL ENABLED, THE PUMPS WILL THE PUMPS WILL THE PUMPS WILL PUMPS WILL PUMPS WILL WILL WILL START AND RUN CONTINUOUSLY. IF FOR ANY REASON ITS AND RUN CONTINUOUSLY. IF FOR ANY REASON ITS AND RUN CONTINUOUSLY. IF FOR ANY REASON ITS RUN CONTINUOUSLY. IF FOR ANY REASON ITS RUN CONTINUOUSLY. IF FOR ANY REASON ITS CONTINUOUSLY. IF FOR ANY REASON ITS CONTINUOUSLY. IF FOR ANY REASON ITS IF FOR ANY REASON ITS IF FOR ANY REASON ITS FOR ANY REASON ITS FOR ANY REASON ITS ANY REASON ITS ANY REASON ITS REASON ITS REASON ITS ITS ITS STATUS DOES NOT MATCH ITS COMMANDED VALUE AN ALARM DOES NOT MATCH ITS COMMANDED VALUE AN ALARM DOES NOT MATCH ITS COMMANDED VALUE AN ALARM NOT MATCH ITS COMMANDED VALUE AN ALARM NOT MATCH ITS COMMANDED VALUE AN ALARM MATCH ITS COMMANDED VALUE AN ALARM MATCH ITS COMMANDED VALUE AN ALARM ITS COMMANDED VALUE AN ALARM ITS COMMANDED VALUE AN ALARM COMMANDED VALUE AN ALARM COMMANDED VALUE AN ALARM VALUE AN ALARM VALUE AN ALARM AN ALARM AN ALARM ALARM ALARM WILL BE GENERATED. THE LAG PUMP WILL START IF THE LEAD BE GENERATED. THE LAG PUMP WILL START IF THE LEAD BE GENERATED. THE LAG PUMP WILL START IF THE LEAD GENERATED. THE LAG PUMP WILL START IF THE LEAD GENERATED. THE LAG PUMP WILL START IF THE LEAD THE LAG PUMP WILL START IF THE LEAD THE LAG PUMP WILL START IF THE LEAD LAG PUMP WILL START IF THE LEAD LAG PUMP WILL START IF THE LEAD PUMP WILL START IF THE LEAD PUMP WILL START IF THE LEAD WILL START IF THE LEAD WILL START IF THE LEAD START IF THE LEAD START IF THE LEAD IF THE LEAD IF THE LEAD THE LEAD THE LEAD LEAD LEAD PUMP IS IN ALARM. CONDENSER WATER CONTROL WHEN EITHER CONDENSER WATER PUMP HAS STATUS, THE EITHER CONDENSER WATER PUMP HAS STATUS, THE EITHER CONDENSER WATER PUMP HAS STATUS, THE CONDENSER WATER PUMP HAS STATUS, THE CONDENSER WATER PUMP HAS STATUS, THE WATER PUMP HAS STATUS, THE WATER PUMP HAS STATUS, THE PUMP HAS STATUS, THE PUMP HAS STATUS, THE HAS STATUS, THE HAS STATUS, THE STATUS, THE STATUS, THE THE THE COOLING TOWER FANS WILL MODULATE AS NECESSARY TO TOWER FANS WILL MODULATE AS NECESSARY TO TOWER FANS WILL MODULATE AS NECESSARY TO FANS WILL MODULATE AS NECESSARY TO FANS WILL MODULATE AS NECESSARY TO WILL MODULATE AS NECESSARY TO WILL MODULATE AS NECESSARY TO MODULATE AS NECESSARY TO MODULATE AS NECESSARY TO AS NECESSARY TO AS NECESSARY TO NECESSARY TO NECESSARY TO TO TO MAINTAIN THE CONDENSER WATER SUPPLY TO THE CHILLERS THE CONDENSER WATER SUPPLY TO THE CHILLERS THE CONDENSER WATER SUPPLY TO THE CHILLERS CONDENSER WATER SUPPLY TO THE CHILLERS CONDENSER WATER SUPPLY TO THE CHILLERS WATER SUPPLY TO THE CHILLERS WATER SUPPLY TO THE CHILLERS SUPPLY TO THE CHILLERS SUPPLY TO THE CHILLERS TO THE CHILLERS TO THE CHILLERS THE CHILLERS THE CHILLERS CHILLERS CHILLERS AT SETPOINT. PUMP CYCLING THE LEAD PUMP SHALL BE CHANGED OVER ON A WEEKLY LEAD PUMP SHALL BE CHANGED OVER ON A WEEKLY LEAD PUMP SHALL BE CHANGED OVER ON A WEEKLY PUMP SHALL BE CHANGED OVER ON A WEEKLY PUMP SHALL BE CHANGED OVER ON A WEEKLY SHALL BE CHANGED OVER ON A WEEKLY SHALL BE CHANGED OVER ON A WEEKLY BE CHANGED OVER ON A WEEKLY BE CHANGED OVER ON A WEEKLY CHANGED OVER ON A WEEKLY CHANGED OVER ON A WEEKLY OVER ON A WEEKLY OVER ON A WEEKLY ON A WEEKLY ON A WEEKLY A WEEKLY A WEEKLY WEEKLY WEEKLY BASIS. THE OPERATOR SHALL HAVE CAPABILITY OF SELECTING THE OPERATOR SHALL HAVE CAPABILITY OF SELECTING THE OPERATOR SHALL HAVE CAPABILITY OF SELECTING THE OPERATOR SHALL HAVE CAPABILITY OF SELECTING OPERATOR SHALL HAVE CAPABILITY OF SELECTING OPERATOR SHALL HAVE CAPABILITY OF SELECTING SHALL HAVE CAPABILITY OF SELECTING SHALL HAVE CAPABILITY OF SELECTING HAVE CAPABILITY OF SELECTING HAVE CAPABILITY OF SELECTING CAPABILITY OF SELECTING CAPABILITY OF SELECTING OF SELECTING OF SELECTING SELECTING SELECTING THE DAY AND TIME THE CHANGEOVER OCCURS, AND THE DAY AND TIME THE CHANGEOVER OCCURS, AND THE DAY AND TIME THE CHANGEOVER OCCURS, AND THE AND TIME THE CHANGEOVER OCCURS, AND THE AND TIME THE CHANGEOVER OCCURS, AND THE TIME THE CHANGEOVER OCCURS, AND THE TIME THE CHANGEOVER OCCURS, AND THE THE CHANGEOVER OCCURS, AND THE THE CHANGEOVER OCCURS, AND THE CHANGEOVER OCCURS, AND THE CHANGEOVER OCCURS, AND THE OCCURS, AND THE OCCURS, AND THE AND THE AND THE THE THE CAPABILITY OF DISABLING THE CHANGEOVER.
AutoCAD SHX Text
KEYED NOTES 1. INSTALL NEW PROGRAMMABLE APPLICATION CONTROLLER. INSTALL NEW PROGRAMMABLE APPLICATION CONTROLLER. PROGRAM CONTROLLER PER EXISTING SEQUENCE OF OPERATION.
AutoCAD SHX Text
-
AutoCAD SHX Text
CHILLER
AutoCAD SHX Text
LC-CHW-2
AutoCAD SHX Text
1
AutoCAD SHX Text
CS
AutoCAD SHX Text
MS
AutoCAD SHX Text
PUMP ON/OFF
AutoCAD SHX Text
CT-2
AutoCAD SHX Text
HS
AutoCAD SHX Text
HOA
AutoCAD SHX Text
DISPLAY
AutoCAD SHX Text
VFD
AutoCAD SHX Text
CS
AutoCAD SHX Text
FAN RUNNING
AutoCAD SHX Text
POWER (BY DIV. 26)
AutoCAD SHX Text
SPEED
AutoCAD SHX Text
FAN ENABLE
AutoCAD SHX Text
HS
AutoCAD SHX Text
HOA
AutoCAD SHX Text
DISPLAY
AutoCAD SHX Text
VFD
AutoCAD SHX Text
CS
AutoCAD SHX Text
FAN RUNNING
AutoCAD SHX Text
MS
AutoCAD SHX Text
POWER (BY DIV. 26)
AutoCAD SHX Text
SPEED
AutoCAD SHX Text
FAN ENABLE
AutoCAD SHX Text
CT-2
AutoCAD SHX Text
HS
AutoCAD SHX Text
HOA
AutoCAD SHX Text
DISPLAY
AutoCAD SHX Text
VFD
AutoCAD SHX Text
CS
AutoCAD SHX Text
FAN RUNNING
AutoCAD SHX Text
POWER (BY DIV. 26)
AutoCAD SHX Text
SPEED
AutoCAD SHX Text
FAN ENABLE
AutoCAD SHX Text
HS
AutoCAD SHX Text
HOA
AutoCAD SHX Text
DISPLAY
AutoCAD SHX Text
VFD
AutoCAD SHX Text
CS
AutoCAD SHX Text
FAN RUNNING
AutoCAD SHX Text
PUMP RUNNING
AutoCAD SHX Text
CS
AutoCAD SHX Text
PUMP ON/OFF
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
CONDENSER WATER SUPPLY TEMP.
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
CONDENSER WATER RETURN TEMP.
AutoCAD SHX Text
Last saved by: KINSONJR Time: 3/6/2020 9:04:36 AM
AutoCAD SHX Text
XREFs: [CDMS_2234] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H704CHDI.dwg
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2
02
0
H-705
PROCESS AND INSTRUMENTATION DIAGRAM
HEATING HOT WATER SYSTEM
DIAGRAM A
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H705CHDI.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
HOT WATER SYSTEM
AutoCAD SHX Text
NTS
AutoCAD SHX Text
-
AutoCAD SHX Text
P-1
AutoCAD SHX Text
M
AutoCAD SHX Text
P-2
AutoCAD SHX Text
M
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
HWS TEMP.
AutoCAD SHX Text
CS
AutoCAD SHX Text
MS
AutoCAD SHX Text
PUMP ON/OFF
AutoCAD SHX Text
PUMP RUNNING
AutoCAD SHX Text
KEYED NOTES 1. INSTALL NEW PROGRAMMABLE APPLICATION INSTALL NEW PROGRAMMABLE APPLICATION CONTROLLER. PROGRAM CONTROLLER PER EXISTING SEQUENCE OF OPERATION. 2. EX. PNEUMATIC ACTUATOR.EX. PNEUMATIC ACTUATOR.
AutoCAD SHX Text
-
AutoCAD SHX Text
LC-HW
AutoCAD SHX Text
1
AutoCAD SHX Text
MS
AutoCAD SHX Text
PUMP ON/OFF
AutoCAD SHX Text
CS
AutoCAD SHX Text
PUMP RUNNING
AutoCAD SHX Text
A
AutoCAD SHX Text
H-700,701
AutoCAD SHX Text
HOT WATER SUPPLY
AutoCAD SHX Text
HEAT EXCHANGER
AutoCAD SHX Text
A
AutoCAD SHX Text
VALVE POSITION
AutoCAD SHX Text
H-700,701
AutoCAD SHX Text
HOT WATER RETURN
AutoCAD SHX Text
E/P
AutoCAD SHX Text
A
AutoCAD SHX Text
B/L
AutoCAD SHX Text
OUTSIDE AIR
AutoCAD SHX Text
TO BOILER FEED PUMP
AutoCAD SHX Text
B/L
AutoCAD SHX Text
LOW PRESSURE CONDENSATE
AutoCAD SHX Text
HEATING HOT WATER SYSTEM SEQUENCE OF OPERATION HOT WATER PUMP CONTROL THE OPERATOR SELECTED LEAD HOT WATER PUMP WILL OPERATOR SELECTED LEAD HOT WATER PUMP WILL OPERATOR SELECTED LEAD HOT WATER PUMP WILL SELECTED LEAD HOT WATER PUMP WILL SELECTED LEAD HOT WATER PUMP WILL LEAD HOT WATER PUMP WILL LEAD HOT WATER PUMP WILL HOT WATER PUMP WILL HOT WATER PUMP WILL WATER PUMP WILL WATER PUMP WILL PUMP WILL PUMP WILL WILL WILL AUTOMATICALLY START WHEN THE OUTSIDE AIR TEMPERATURE START WHEN THE OUTSIDE AIR TEMPERATURE START WHEN THE OUTSIDE AIR TEMPERATURE WHEN THE OUTSIDE AIR TEMPERATURE WHEN THE OUTSIDE AIR TEMPERATURE THE OUTSIDE AIR TEMPERATURE THE OUTSIDE AIR TEMPERATURE OUTSIDE AIR TEMPERATURE OUTSIDE AIR TEMPERATURE AIR TEMPERATURE AIR TEMPERATURE TEMPERATURE TEMPERATURE FALLS BELOW THE SYSTEM ENABLE SETPOINT. WHEN THE BELOW THE SYSTEM ENABLE SETPOINT. WHEN THE BELOW THE SYSTEM ENABLE SETPOINT. WHEN THE THE SYSTEM ENABLE SETPOINT. WHEN THE THE SYSTEM ENABLE SETPOINT. WHEN THE SYSTEM ENABLE SETPOINT. WHEN THE SYSTEM ENABLE SETPOINT. WHEN THE ENABLE SETPOINT. WHEN THE ENABLE SETPOINT. WHEN THE SETPOINT. WHEN THE SETPOINT. WHEN THE WHEN THE WHEN THE THE THE OUTSIDE AIR TEMPERATURE RISES ABOVE THIS SETPOINT PLUS AIR TEMPERATURE RISES ABOVE THIS SETPOINT PLUS AIR TEMPERATURE RISES ABOVE THIS SETPOINT PLUS TEMPERATURE RISES ABOVE THIS SETPOINT PLUS TEMPERATURE RISES ABOVE THIS SETPOINT PLUS RISES ABOVE THIS SETPOINT PLUS RISES ABOVE THIS SETPOINT PLUS ABOVE THIS SETPOINT PLUS ABOVE THIS SETPOINT PLUS THIS SETPOINT PLUS THIS SETPOINT PLUS SETPOINT PLUS SETPOINT PLUS PLUS PLUS A DIFFERENTIAL THE HOT WATER PUMPS WILL TURN OFF. DIFFERENTIAL THE HOT WATER PUMPS WILL TURN OFF. DIFFERENTIAL THE HOT WATER PUMPS WILL TURN OFF. THE HOT WATER PUMPS WILL TURN OFF. THE HOT WATER PUMPS WILL TURN OFF. HOT WATER PUMPS WILL TURN OFF. HOT WATER PUMPS WILL TURN OFF. WATER PUMPS WILL TURN OFF. WATER PUMPS WILL TURN OFF. PUMPS WILL TURN OFF. PUMPS WILL TURN OFF. WILL TURN OFF. WILL TURN OFF. TURN OFF. TURN OFF. OFF. OFF. WHEN ENABLED, THE LEAD PUMP WILL START AND RUN ENABLED, THE LEAD PUMP WILL START AND RUN ENABLED, THE LEAD PUMP WILL START AND RUN THE LEAD PUMP WILL START AND RUN THE LEAD PUMP WILL START AND RUN LEAD PUMP WILL START AND RUN LEAD PUMP WILL START AND RUN PUMP WILL START AND RUN PUMP WILL START AND RUN WILL START AND RUN WILL START AND RUN START AND RUN START AND RUN AND RUN AND RUN RUN RUN CONTINUOUSLY. IF FOR ANY REASON ITS STATUS DOES NOT IF FOR ANY REASON ITS STATUS DOES NOT IF FOR ANY REASON ITS STATUS DOES NOT FOR ANY REASON ITS STATUS DOES NOT FOR ANY REASON ITS STATUS DOES NOT ANY REASON ITS STATUS DOES NOT ANY REASON ITS STATUS DOES NOT REASON ITS STATUS DOES NOT REASON ITS STATUS DOES NOT ITS STATUS DOES NOT ITS STATUS DOES NOT STATUS DOES NOT STATUS DOES NOT DOES NOT DOES NOT NOT NOT MATCH ITS COMMANDED VALUE AN ALARM WILL BE GENERATED. ITS COMMANDED VALUE AN ALARM WILL BE GENERATED. ITS COMMANDED VALUE AN ALARM WILL BE GENERATED. COMMANDED VALUE AN ALARM WILL BE GENERATED. COMMANDED VALUE AN ALARM WILL BE GENERATED. VALUE AN ALARM WILL BE GENERATED. VALUE AN ALARM WILL BE GENERATED. AN ALARM WILL BE GENERATED. AN ALARM WILL BE GENERATED. ALARM WILL BE GENERATED. ALARM WILL BE GENERATED. WILL BE GENERATED. WILL BE GENERATED. BE GENERATED. BE GENERATED. GENERATED. GENERATED. THE LAG PUMP WILL START IF THE LEAD PUMP IS IN ALARM. HEAT EXCHANGER VALVE CONTROL THE HEAT EXCHANGER VALVE WILL MODULATE TO MAINTAIN THE HEAT EXCHANGER VALVE WILL MODULATE TO MAINTAIN THE HEAT EXCHANGER VALVE WILL MODULATE TO MAINTAIN THE EXCHANGER VALVE WILL MODULATE TO MAINTAIN THE EXCHANGER VALVE WILL MODULATE TO MAINTAIN THE VALVE WILL MODULATE TO MAINTAIN THE VALVE WILL MODULATE TO MAINTAIN THE WILL MODULATE TO MAINTAIN THE WILL MODULATE TO MAINTAIN THE MODULATE TO MAINTAIN THE MODULATE TO MAINTAIN THE TO MAINTAIN THE TO MAINTAIN THE MAINTAIN THE MAINTAIN THE THE THE HOT WATER SUPPLY TEMPERATURE AT A SETPOINT THAT IS WATER SUPPLY TEMPERATURE AT A SETPOINT THAT IS WATER SUPPLY TEMPERATURE AT A SETPOINT THAT IS SUPPLY TEMPERATURE AT A SETPOINT THAT IS SUPPLY TEMPERATURE AT A SETPOINT THAT IS TEMPERATURE AT A SETPOINT THAT IS TEMPERATURE AT A SETPOINT THAT IS AT A SETPOINT THAT IS AT A SETPOINT THAT IS A SETPOINT THAT IS A SETPOINT THAT IS SETPOINT THAT IS SETPOINT THAT IS THAT IS THAT IS IS IS RESET INVERSELY ON THE OUTSIDE AIR TEMPERATURE WHEN INVERSELY ON THE OUTSIDE AIR TEMPERATURE WHEN INVERSELY ON THE OUTSIDE AIR TEMPERATURE WHEN ON THE OUTSIDE AIR TEMPERATURE WHEN ON THE OUTSIDE AIR TEMPERATURE WHEN THE OUTSIDE AIR TEMPERATURE WHEN THE OUTSIDE AIR TEMPERATURE WHEN OUTSIDE AIR TEMPERATURE WHEN OUTSIDE AIR TEMPERATURE WHEN AIR TEMPERATURE WHEN AIR TEMPERATURE WHEN TEMPERATURE WHEN TEMPERATURE WHEN WHEN WHEN EITHER ONE OF THE HOT WATER PUMPS HAS A STATUS OF ONE OF THE HOT WATER PUMPS HAS A STATUS OF ONE OF THE HOT WATER PUMPS HAS A STATUS OF OF THE HOT WATER PUMPS HAS A STATUS OF OF THE HOT WATER PUMPS HAS A STATUS OF THE HOT WATER PUMPS HAS A STATUS OF THE HOT WATER PUMPS HAS A STATUS OF HOT WATER PUMPS HAS A STATUS OF HOT WATER PUMPS HAS A STATUS OF WATER PUMPS HAS A STATUS OF WATER PUMPS HAS A STATUS OF PUMPS HAS A STATUS OF PUMPS HAS A STATUS OF HAS A STATUS OF HAS A STATUS OF A STATUS OF A STATUS OF STATUS OF STATUS OF OF OF "ON". PUMP CYCLING THE LEAD PUMP SHALL BE CHANGED OVER ON A WEEKLY LEAD PUMP SHALL BE CHANGED OVER ON A WEEKLY LEAD PUMP SHALL BE CHANGED OVER ON A WEEKLY PUMP SHALL BE CHANGED OVER ON A WEEKLY PUMP SHALL BE CHANGED OVER ON A WEEKLY SHALL BE CHANGED OVER ON A WEEKLY SHALL BE CHANGED OVER ON A WEEKLY BE CHANGED OVER ON A WEEKLY BE CHANGED OVER ON A WEEKLY CHANGED OVER ON A WEEKLY CHANGED OVER ON A WEEKLY OVER ON A WEEKLY OVER ON A WEEKLY ON A WEEKLY ON A WEEKLY A WEEKLY A WEEKLY WEEKLY WEEKLY BASIS. THE OPERATOR SHALL HAVE CAPABILITY OF SELECTING THE OPERATOR SHALL HAVE CAPABILITY OF SELECTING THE OPERATOR SHALL HAVE CAPABILITY OF SELECTING THE OPERATOR SHALL HAVE CAPABILITY OF SELECTING OPERATOR SHALL HAVE CAPABILITY OF SELECTING OPERATOR SHALL HAVE CAPABILITY OF SELECTING SHALL HAVE CAPABILITY OF SELECTING SHALL HAVE CAPABILITY OF SELECTING HAVE CAPABILITY OF SELECTING HAVE CAPABILITY OF SELECTING CAPABILITY OF SELECTING CAPABILITY OF SELECTING OF SELECTING OF SELECTING SELECTING SELECTING THE DAY AND TIME THE CHANGEOVER OCCURS, AND THE DAY AND TIME THE CHANGEOVER OCCURS, AND THE DAY AND TIME THE CHANGEOVER OCCURS, AND THE AND TIME THE CHANGEOVER OCCURS, AND THE AND TIME THE CHANGEOVER OCCURS, AND THE TIME THE CHANGEOVER OCCURS, AND THE TIME THE CHANGEOVER OCCURS, AND THE THE CHANGEOVER OCCURS, AND THE THE CHANGEOVER OCCURS, AND THE CHANGEOVER OCCURS, AND THE CHANGEOVER OCCURS, AND THE OCCURS, AND THE OCCURS, AND THE AND THE AND THE THE THE CAPABILITY OF DISABLING THE CHANGEOVER.
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
OPEN/CLOSED
AutoCAD SHX Text
TE/TT
AutoCAD SHX Text
HWR TEMP.
AutoCAD SHX Text
B/L
AutoCAD SHX Text
COMBUSTION AIR
AutoCAD SHX Text
A
AutoCAD SHX Text
OPEN/CLOSED
AutoCAD SHX Text
B/L
AutoCAD SHX Text
OUTSIDE AIR
AutoCAD SHX Text
B/L
AutoCAD SHX Text
COMBUSTION AIR
AutoCAD SHX Text
TO FINNED TUBE RADIATORS
AutoCAD SHX Text
B/L
AutoCAD SHX Text
LOW PRESSURE STEAM
AutoCAD SHX Text
FROM BOILER FEED PUMP
AutoCAD SHX Text
B/L
AutoCAD SHX Text
LOW PRESSURE CONDENSATE
AutoCAD SHX Text
STEAM BOILER
AutoCAD SHX Text
BOILER ENABLE
AutoCAD SHX Text
Last saved by: KINSONJR Time: 3/6/2020 9:05:21 AM
AutoCAD SHX Text
XREFs: [CDMS_2234] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H705CHDI.dwg
STATE OF CONNECTICUT
JUDICIAL BRANCH
BAS IMPROVEMENTS
BRIDGEPORT SUPERIOR COURTHOUSE
77 Hartland Street
East Hartford, CT 06108
Tel: (860) 529-7615
© 2
02
0
H-706
NETWORK RISER DIAGRAM
DIAGRAM 1
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
D
AutoCAD SHX Text
E
AutoCAD SHX Text
F
AutoCAD SHX Text
G
AutoCAD SHX Text
H
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
REV.
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRWN
AutoCAD SHX Text
CHKD
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CROSS CHK'D BY:
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SHEET CHK'D BY:
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
FILE NAME:
AutoCAD SHX Text
CDM SMITH ALL RIGHTS RESERVED. REUSE OF DOCUMENTS: THESE DOCUMENTS AND DESIGNS PROVIDED BY PROFESSIONAL SERVICE, INCORPORATED HEREIN, ARE THE PROPERTY OF CDM SMITH AND ARE NOT TO BE USED, IN WHOLE OR PART, FOR ANY OTHER PROJECT WITHOUT THE WRITTEN AUTHORIZATION OF CDM SMITH.
AutoCAD SHX Text
MARCH 2020
AutoCAD SHX Text
251813-242340
AutoCAD SHX Text
H706CHDI.DWG
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
C. BRAITHWAITE
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
I. MARCHANT
AutoCAD SHX Text
D. FLAHERTY
AutoCAD SHX Text
LC-CHW-1
AutoCAD SHX Text
FIRST FLOOR
AutoCAD SHX Text
BASEMENT
AutoCAD SHX Text
SECOND FLOOR
AutoCAD SHX Text
LC-AHU-2
AutoCAD SHX Text
LC-HW
AutoCAD SHX Text
NETWORK RISER DIAGRAM
AutoCAD SHX Text
-
AutoCAD SHX Text
NTS
AutoCAD SHX Text
LC-AC-6
AutoCAD SHX Text
GENERAL NOTE: 1. CONTRACTOR SHALL VERIFY WIRE ROUTING.CONTRACTOR SHALL VERIFY WIRE ROUTING.
AutoCAD SHX Text
PAC
AutoCAD SHX Text
PAC
AutoCAD SHX Text
LC-CHW-2
AutoCAD SHX Text
PAC
AutoCAD SHX Text
LC-AHU-1
AutoCAD SHX Text
PAC
AutoCAD SHX Text
LC-AC-2
AutoCAD SHX Text
ASC
AutoCAD SHX Text
LC-AC-8
AutoCAD SHX Text
LC-AC-9
AutoCAD SHX Text
ASC
AutoCAD SHX Text
ASC
AutoCAD SHX Text
LC-AC-1
AutoCAD SHX Text
ASC
AutoCAD SHX Text
LC-AC-10
AutoCAD SHX Text
ASC
AutoCAD SHX Text
GA2
AutoCAD SHX Text
NC
AutoCAD SHX Text
PAC
AutoCAD SHX Text
ASC
AutoCAD SHX Text
LC-AC-5
AutoCAD SHX Text
ASC
AutoCAD SHX Text
LC-AC-3
AutoCAD SHX Text
ASC
AutoCAD SHX Text
LC-AC-4
AutoCAD SHX Text
ASC
AutoCAD SHX Text
CAT 6 LAN (BY OTHERS)
AutoCAD SHX Text
THIRD FLOOR
AutoCAD SHX Text
ATTIC
AutoCAD SHX Text
SHIELDED TWISTED PAIR CABLE
AutoCAD SHX Text
LAN CABLE
AutoCAD SHX Text
FIBER OPTIC CABLE
AutoCAD SHX Text
CABLE TYPE
AutoCAD SHX Text
PAC
AutoCAD SHX Text
ASC
AutoCAD SHX Text
NC
AutoCAD SHX Text
ABBREVIATIONS
AutoCAD SHX Text
PROGRAMMABLE APPLICATION CONTROLLER
AutoCAD SHX Text
APPLICATION SPECIFIC CONTROLLER
AutoCAD SHX Text
NETWORK CONTROLLER
AutoCAD SHX Text
CP-CHW
AutoCAD SHX Text
CP-HW
AutoCAD SHX Text
CP-AHU-1
AutoCAD SHX Text
CP-AC-2,8
AutoCAD SHX Text
CP-AC-9
AutoCAD SHX Text
CP-AC-1,10
AutoCAD SHX Text
CP-AHU-2,AC-6
AutoCAD SHX Text
CP-AC-5
AutoCAD SHX Text
CP-AC-3,4
AutoCAD SHX Text
CP-NC
AutoCAD SHX Text
CONTROLLER TAG (TYP.)
AutoCAD SHX Text
CONTROLLER TYPE (TYP.)
AutoCAD SHX Text
CONTROL PANEL TAG (TYP.)
AutoCAD SHX Text
NEW
AutoCAD SHX Text
EXIST.
AutoCAD SHX Text
EX. SHIELDED TWISTED PAIR CABLE (TYP)
AutoCAD SHX Text
Last saved by: KINSONJR Time: 3/6/2020 9:06:01 AM
AutoCAD SHX Text
XREFs: [CDMS_2234] Images: []
AutoCAD SHX Text
pw:\\cdmsmith-az02-pw.bentley.com:PW_PL1\251813\242340\04 Design Services NM_10%\06 HVAC\10 CADD\H706CHDI.dwg