conference agenda - intergraph · 120 nch – th oor grace ha marigod room a grace room b marigod...

INTERGRAPH 2012 KOREA

CONFERENCE AGENDAProcess, Power & Marine4-5 September 2012 ∙ Seoul, Korea

Intergraph 2012 Korea

2

Time KeynoTes marigold room a & B – 5Th Floor

9.30amWelcome Address S.E. Kim, President, Process, Power & Marine, Korea, Intergraph

9.40amWelcome Address by IUC Chairman Myung Su Han, General Manager, Hyundai Engineering Company Limited

9.50amIntergraph Process, Power and Marine Business Overview Gerhard Sallinger, President, Process, Power & Marine, Intergraph

10.15amIntergraph Process, Power & Marine in Asia-Pacific: Thinking Forward Franz Kufner, Senior Vice President, Process, Power & Marine, Asia-Pacific, Intergraph

10.45am BrEAK

11.10amUnlock the Full Potential of Your Enterprise Charles Evans, Chief Technology Officer and Executive Vice President of Development, Process, Power & Marine, Intergraph

12.00pmStatus and Characteristics of Overseas Plants: Guiding Global Projects to Success Hun Cheol Cheon, Director General, Management Strategy Office, Korea EximBank

12.30pm LunCH – 6TH FLOOr, GrACE HALL

MArIGOLD rOOM A GrACE rOOM B MArIGOLD rOOM B

engineering & schemaTics enTerprise procuremenT, FaBricaTion

& consTrucTion

1.45pmEngineering & Schematics: Engineering and Beyond

Zur Bar, Intergraph

SmartPlant Foundation: Speeding the Time to Information Value

Allen Egnor and Supratim Mukhopadhyay, Intergraph

SmartPlant Construction Tim McDavid, Intergraph

2.45pmAutomation of SmartPlant P&ID

Kyung Woon Choi, Daelim Industrial Company Limited

Performance Project Integration Jong Seok Yeo,

Doosan Heavy Industries & Construction

SmartPlant 3D and SmartPlant reference Data Interface for new

Piping Components Jin Oh Jang,

Hyundai Engineering Company Limited

3.15pm BrEAK

3.45pm

smarT 3d

Owner Operator Solutions Adrian Park, Dell Wilson, and

Ray Howarth, Intergraph

SmartPlant Materials and SmartPlant reference

Data Solutions Vineesh Gupta, IntergraphSmart 3D Solutions

Tom Szoka and Jack Zhou, Intergraph

4.15pm

SmartPlant Materials: Complex Package Handling

Jeong Youl Lee, Intergraph4.45pm

Status of SmartPlant Enterprise Implementation at HHI

Hoa Yong Kim, Hyundai Heavy Industries

Company Limited

A Study of Augmented reality Model from Shipbuilding and

Plant Industries Based on SmartPlant Enterprise

Jung Min Lee, Inha University

5.15pm DAy 1 – COnFErEnCE CLOSE

5.45pm Intergraph 2012 Korea – Conference Reception Mürren

4 September 2012


3

Time KeynoTes marigold room a – 5Th Floor

9.30amMain Issues of Project Life-cycle Management Setup for the Future Hyo Won Suh, Professor, Korea Advanced Institute of Science and Technology

9.50amEngineering Validation and Visual Asset Management: The Future is Now Charles Evans and the Intergraph Process, Power & Marine Korea Team

10.35amCAXperts Overview Anton Schreibmueller, Chief Executive Officer, Global Professional Services, CAXperts

10.40am BrEAK

MArIGOld rOOM A GrACE rOOM B MArIGOld rOOM B MEETInG rOOM B

smarT 3d owner operaTors engineering & schemaTics

inTergraph cadworx & analysis

soluTions

11.05amSmart 3d Integration

Luther Walke and Jack Zhou, Intergraph

Brownfield design Base Capture and Maintenance

CAPEX and OPEX Project delivery

Process Safety and Asset Integrity Management

Solutions

Adrian Park, Dell Wilson, and Ray Howarth, Intergraph

Making the right decision Early

Zur Bar, Intergraph CAESAr II, PV Elite & TAnK: Improving

Engineering Collaboration for SmartPlant Enterprise Mandeep Singh, Intergraph

11.50amSmart 3d and SmartPlant

P&Id Integration Luther Walke, Intergraph

Smart Project Execution with Engineering &

Schematics Zur Bar, Intergraph

12.30pm lunCH – 6TH FlOOr, GrACE HAll

1.45pm Smart 3d new Features Luther Walke, Intergraph

enTerpriseleveraging Engineering & Schematics in Engineering

and Operational Tasks Zur Bar, Intergraph

CAdWorx fieldPipe: Capturing Existing Facilities to Create

Intelligent deliverables Vornel Walker and Joe Dixon,

Intergraph

SmartPlant Enterprise: Streamlining Enterprise

Integration Allen Egnor, Intergraph

2.30pm

legacy data and 3d Interoperability

Luther Walke and Jack Zhou, Intergraph

Introducing SmartPlant Fusion

Supratim Mukhopadhyay, Intergraph

indusTry

Intergraph Solutions for the Power Generation

Industry Steve Furze, Intergraph

3.15pm BrEAK

3.45pm

Hanger and Support reference Setup

Jong Seop Keum, Doosan Heavy Industries &

ConstructionImproving the user

Experience: Intergraph’s user Experience and

Mobile Strategy Allen Egnor, Intergraph

leica Geosystems Solutions for

Intergraph PP&M Faheem Khan,

Leica Geosystems

CAdWorx Plant design Suite: Solutions for

less Complex non-capital Projects

Vornel Walker and Joe Dixon, Intergraph

Integrated Project Execution with

SmartPlant Enterprise Dong Min Shin,

SK Engineering & Construction

4.30pmMarine and Offshore

Solutions Steve Furze, Intergraph

Methodology for Optimal SmartPlant Enterprise

Performance Hyun Kim, Intergraph

uSIS Clash report Kyu Su Park, USIS

4.50pmuSIS PIMS for SmartPlant 3d

Seung Jo Lee, USIS

5.15pm COnFErEnCE ClOSE

5 September 2012


4

S.E. KimPresident, Process, Power & Marine, Korea, Intergraph

S.E. is the President of Intergraph® Korea’s Process, Power & Marine

Division, and has been leading Intergraph Korea as a highly successful subsidiary since 1989. He expanded Intergraph’s business portfolio through the acquisition of TechServer in 2008. S.E. has more than 30 years of experience in the engineering and CAD/CAM industry, and has been with Intergraph for 23 years. He has a master’s degree in electrical engineering from Inha University.

Gerhard SallingerPresident, Process, Power & Marine, Intergraph

Gerhard is responsible for the global strategic direction of the Intergraph

Process, Power & Marine division, and overall business development. He has been with Intergraph and its Process, Power & Marine division since 1985. Before becoming president, Gerhard was executive vice president responsible for worldwide sales, marketing, and business development. Prior to joining Intergraph, he owned an engineering firm specialising in the design of fire protection systems. Gerhard is a chemical engineer with more than 30 years of experience in the process industries.

Franz KufnerSenior Vice President, Process, Power & Marine, Asia-Pacific, Intergraph

Franz is responsible for Intergraph Process, Power & Marine division’s

business operations in Asia-Pacific. Prior to this role, he was country manager for the Greater China region, and has also held business development positions with Intergraph. He has also managed Intergraph’s information management and material management solutions both globally and within the Asia-Pacific region. Franz has more than 22 years of engineering, procurement, and construction (EPC) experience in the oil and gas, petrochemical, and mining industries, where he has been responsible for the delivery of major capital projects in the capacity of manager of the engineering and projects departments. He holds a bachelor’s degree in electrical engineering.

Charles EvansCharles Evans, Chief Technology Officer and Executive Vice President of Development, Process, Power & Marine, Intergraph

Charles is responsible for all Intergraph Process, Power & Marine software development activities. He has more than 22 years of experience in the engineering and CAD industry. Charles joined Intergraph in 1989, and has served in most aspects of product research and development. He was instrumental in the design and implementation of Intergraph’s SmartPlant® platform, and has held management positions in several product centres. He previously worked for IBM during the introduction of the PC and as an international consultant.

Hun Cheol CheonHun Cheol Cheon, Director General, Management Strategy Office, Korea EximBank

The Export-Import bank of Korea (Korea EximBank) provides both direct lending and guarantees aimed at supporting exports and imports, overseas investments, and overseas natural resource developments of Korean companies. Hun Cheol joined Korea EximBank in 1988 as a loan officer in the credit department, covering mid- and long-term export credits for the industrial plants. Since then, he has worked in various positions across planning, buyer credits, structured trade finances and credit policy. Hun Cheol also held the position of senior manager at Kexim Bank (UK), a subsidiary of Korea EximBank in London. He currently serves as the Director General of the Management Strategy Office at Korea EximBank. Hun Cheol is a graduate of Kyungbook National University.

Hyo Won SuhProfessor, Korea Advanced Institute of Science and Technology

Korea Advanced Institute of Science and Technology (KAIST) is Korea’s first

graduate school specialising in science and engineering education and research. Hyo Won is currently a professor at KAIST. Prior to this role, he was working at Daewoo Heavy Industries & Machinery as the chief researcher. Hyo Won is a graduate of West Virginia University, USA.

Keynote SpeaKer biographieS

5


Intergraph Process, Power & Marine Business OverviewGerhard Sallinger, President, Process, Power & Marine, Intergraph

Intergraph’s Process, Power & Marine division is working with customers around the world to think forward, helping them to increase productivity, accelerate projects, and gain a competitive edge. Intergraph’s SmartPlant and SmartMarine® Enterprise suites of solutions are part of the broadest portfolio available in the market, offering the future of engineering today to both EPCs and owner operators. This keynote will give an overview on the division’s status, global outlook, and some technology and market trends.

Intergraph Process, Power & Marine in Asia-Pacific: Thinking Forward Franz Kufner, Senior Vice President, Process, Power & Marine, Asia-Pacific, Intergraph

This session will highlight some industry trends in the Asia-Pacific region, as well as several Intergraph customers and their success stories from using SmartPlant and SmartMarine Enterprise solutions. Customers using these industry-leading solutions report more than 30% productivity gains, which is extremely important in an increasingly competitive global market. With over 40 years of innovation, stability, and market leadership, this session will demonstrate why Intergraph is a proven and dedicated partner for our customers.

Unlock the Full Potential of Your EnterpriseCharles Evans, Chief Technology Officer and Executive Vice President of Development, Process, Power & Marine, Intergraph

A growing number of leading companies in the process, power and marine industries are looking beyond traditional point solutions from a multitude of software vendors that deliver only modest productivity gains. Instead, they are embracing new technology that unlocks the full potential of their own enterprises to gain a competitive advantage in today’s markets. Intergraph Process, Power & Marine provides integrated and scalable software for plant engineering and operation that enables real competitive advantage. This session will highlight some of Intergraph’s most advanced technology enablers for interoperability, quality, construction excellence, and operations efficiency.

Status and Characteristics of Overseas Plants: Guiding Global Projects to SuccessHun Cheol Cheon, Director General, Management Strategy Office, Korea EximBank

The Export-Import Bank of Korea (Korea EximBank) is an offiicial export credit agency, providing comprehensive export credit and guarantee programs to support Korean enterprises in conducting overseas business. This session will cover the characteristics of overseas plant projects and how Korea EximBank provides guidance for successful outcomes.

Keynote abStractS – Day one

6


ENGiNEERiNG & SChEmAtiCS

Engineering & Schematics: Engineering and BeyondZur Bar, Intergraph

“To improve is to change; to be perfect is to change often.” – Winston Churchill Intergraph is changing to improve and exceed the needs and expectations to help our customers face the challenges in the industry. This session will address three main topics: innovation and how Intergraph is bringing the new capabilities in the Engineering & Schematics solution to help your business, lower cost of ownership and the steps we are taking to make deployment easier and faster on projects, and our support and services that we offer to make sure you will be successful with our solutions. You will learn about the improvements of our engineering solutions beyond what is possible today.

Automation of SmartPlant P&IDKyung Woon Choi, Daelim Industrial Company Limited

This session will highlight Daelim Industrial’s SmartPlant P&ID automation development know-how, as well as its implementation strategy for an ongoing project.

SmARt 3D

Smart 3D SolutionsTom Szoka and Jack Zhou, Intergraph

Intergraph has added significant new features in its 3D solutions designed specifically to increase productivity and enhance performance. Intergraph experts will discuss the business and technical benefits of new features in the latest releases of SmartPlant 3D, SmartMarine 3D, SmartPlant 3D Materials Handling Edition, PDS®, and SmartPlant Review. This session will enable you to learn how to improve your engineering designs and take full advantage of the latest software and upcoming releases.

Status of SmartPlant Enterprise Implementation at HHIHoa Yong Kim, Hyundai Heavy Industries Company Limited

Hyundai Heavy Industries (HHI) is one of the world’s leading offshore companies. This session will outline the implementation of HHI’s SmartPlant Enterprise environment and the strengths of the SmartPlant Enterprise solutions. It will also highlight certain issues to be aware of, and the factors for preparation and inspection.

preSentation abStractS – Day one

7


ENtERpRiSE

SmartPlant Foundation: Speeding the Time to Information ValueAllen Egnor and Supratim Mukhopadhyay, Intergraph

Increased performance, enhanced useability, and simpler deployment. These three key values have been the mantra for the latest development cycle of the information management products. This session will discuss the business and technical benefits of the new features, including multi-CPU performance to scale our solutions to the largest user communities, useability enhancements to the web portal, and simplified configuration and mapping. You will also learn how to take full advantage of the latest software to improve performance and productivity, along with an overview of key strategic initiatives, such as SmartPlant Enterprise Control Panel, SmartPlant Fusion, SmartPlant VTL (Validation, Transformation, and Loading), Master Tag Register, and a new Electronic Document and Data Management System (EDMS) module.

Performance Project IntegrationJong Seok Yeo, Doosan Heavy Industries & Construction

This session will highlight the SmartPlant Enterprise integration project at Doosan Heavy Industries & Construction, as well as the current status of its execution plan.

Owner Operator SolutionsAdrian Park, Dell Wilson and Ray Howarth, Intergraph

The last 12 months have seen the scope of existing SmartPlant Enterprise for Owner Operators (SPO) template solutions further increased, and the development and launch of important new solutions. This session will present an overview of these new solutions, including an exciting new mobile solution that supports plant floor and other field workers with access data and documentation offline, and helps them directly capture information on-site. You will also learn more about new technologies for exploiting 3D models for interactive training and planning of maintenance, inspection, and other activities. This session will also highlight selected owner operator success stories.

A Study of Augmented Reality Model from Shipbuilding and Plant Industries Based on SmartPlant EnterpriseJung Min Lee, Inha University

This session will highlight augmented reality techniques that can be applied in the plant and shipbuilding industries. It will also discuss the importance of integrated engineering information, and demonstrate the advantages of applying augmented reality models based on SmartPlant Enterprise and SmartPlant Foundation.



8

pROCuREmENt, FAbRiCAtiON & CONStRuCtiON

SmartPlant ConstructionTim McDavid, Intergraph

This session will discuss the key factors of current SmartPlant Construction product functionality and its future roadmap. The Intergraph solution has grown based on partnerships with construction industry experts during its development cycles. In this session, you will learn about SmartPlant Construction’s short-, mid-, and long-term development strategies.

SmartPlant 3D and SmartPlant Reference Data Interface for New Piping ComponentsJin Oh Jang, Hyundai Engineering Company Limited

Hyundai Engineering is the first Korean customer to use SmartPlant 3D in production. This session will highlight the company’s experience in using the SmartPlant 3D and SmartPlant Reference Data interface. It will also demonstrate how to create a new component with a new piping symbol that is not delivered out of the box within SmartPlant Enterprise, and how to interface with SmartPlant 3D and SmartPlant Reference Data.

SmartPlant Materials and SmartPlant Reference Data SolutionsVineesh Gupta, Intergraph

Key factors in the market share growth of SmartPlant Reference Data and SmartPlant Materials include flexibility, combined with rich and comprehensive functionality, reflecting industry best practices. This session will focus on the continuing, market-driving development strategies for SmartPlant Reference Data and SmartPlant Materials, and major enhancements in the latest versions. Some of the 2012 enhancements include better integration with Smart 3D, APIs for materials tracking at the job site, and the availability for more content for SmartPlant Reference Data.

SmartPlant Materials: Complex Package HandlingJeong Youl Lee, Intergraph

Determining the equipment needed for the EPC business can be challenging due to multiple information sources from various engineering tools. This huge amount of information is then fed into the materials management system. These complex packages can contain hundreds of items that need to be procured, expedited, shipped, and received at the construction site. This session will outline how SmartPlant Materials offers a simple and straightforward workflow, enabling users to effectively track the life cycle of such complex packages.



9

Main Issues of Project Life-cycle Management Setup for the FutureHyo Won Suh, Professor, Korea Advanced Institute of Science and Technology

This session will discuss how information is produced and consumed in a project life-cycle management environment. Producers of information pursue the most efficient ways to generate information, while consumers of information look for easy access to the required data. In this session, you will learn more about the integration and association of information in order to achieve the most effective and efficient way to produce and consume information in a project life-cycle management environment.

Engineering Validation and Visual Asset Management: The Future is NowCharles Evans and the Intergraph Process, Power & Marine Korea Team

Do you work for an engineering organisation or do you belong to a company that owns or operates capital-intensive assets? Are you frequently making decisions that impact cost, safety, production, or plant integrity? Do you consider your company leading-edge or is your company on its way to the top quartile of your peer group? Do you want to learn about exciting and value-adding synergies between Leica Geosystems and Intergraph PP&M? If the answer to any of these questions is yes, this keynote will enable you to learn more about new and exciting solutions that will play a key role for you and your company going forward. The P&ID is a cornerstone of project execution as well as of plant operations. See how you can enforce – in a collaborative manner – engineering integrity early in the project phase (plant improvement as well as new builds). Significantly reduce the risk of late changes, avoid design compromises, and minimise OPEX and risks. Experience a solution that turns laser-scanned point cloud data into an integral component of mobile field and plant floor applications. Open a whole new value dimension in asset management and plant integrity. Making the wrong decisions on an operating plant can be costly and dangerous, which means training the workforce is very important. Learn about a 3D-based solution that opens the door for effectively leveraging the engineering information asset. Rapidly train staff for operational readiness, operations, inspection, and maintenance. Improve safety and cost. This session will make sure you are prepared for some very valuable and exciting opportunities that will change the future.

Keynote abStractS – Day tWo


10

SmARt 3D

Smart 3D IntegrationLuther Walke and Jack Zhou, Intergraph

Smart 3D was designed from the ground up to work well within the ecosystem of various tools and data formats being used on modern complex engineering projects. Whether it is object-based programming interface, industry-standard databases, or support for multiple graphics formats, Smart 3D has strong capabilities to integrate with other tools. This session will focus on three major workflows demonstrating integration functionality delivered out-of-the-box in Smart 3D. These workflows include pipe stress analysis using CAESAR II®, structure/concrete detailing, and brownfield project support through point cloud integration with Leica Cloudworx™.

Smart 3D and SmartPlant P&ID IntegrationLuther Walke, Intergraph

The combination of Smart 3D with SmartPlant P&ID and SmartPlant Foundation provides unmatched functionality to drive quality and consistency of design, using interactive display of P&IDs inside the Smart 3D modelling environment. Intergraph has added significant new features in 2011 R1 release to further improve correlation of P&IDs with Smart 3D, including topology-based auto-correlation between the 3D model and P&IDs. This provides a step-change in productivity, and the ability to correlate and compare data between two applications. In this session, learn more about these new features, along with a brief overview of SmartPlant P&ID and Smart 3D integration.

Smart 3D New FeaturesLuther Walke, Intergraph

This session builds on the Smart 3D Solutions session. You will learn more about additional enhancements not covered in the earlier session, as well as more details on the enhancements that were covered. These enhancements will increase productivity and enhance performance.

Legacy Data and 3D InteroperabilityLuther Walke and Jack Zhou, Intergraph

Today’s capital projects are larger and involve more players than those of the past. Even so, they must be completed at lower cost, with fewer errors, and according to a tighter schedule. It is an increasingly complex environment where designers, engineers, and managers must be able to quickly access the 3D data they need to see regardless of the source. This session will provide an overview of the rich array of translation and interoperability tools available for ensuring Smart 3D projects are fully up to the task.

Hanger and Support Reference SetupJong Seop Keum, Doosan Heavy Industries & Construction

This session will outline Doosan Heavy Industries & Construction’s development plan for hanger and support, including its current status and next steps for further improvement.

preSentation abStractS – Day tWo


11

Integrated Project Execution with SmartPlant EnterpriseDong Min Shin, SK Engineering & Construction

SK Engineering & Construction (SK E&C) is one of the major plant EPC contractors in the oil and gas and power industries. This session will discuss SK E&C’s valuable experiences on the implementation of the suite of SmartPlant Enterprise solutions for its projects.

Marine and Offshore SolutionsSteve Furze, Intergraph

Integrated projects require integrated solutions. Today, almost all companies face some challenges when working in integrated environments. It could be as simple as different 3D disciplines using different software for modelling that are not compatible, resulting in a loss of information/data in translation, or to ensure the consistency of data in the integration of 2D and 3D tools. This session will highlight Intergraph solutions for integration between different 3D disciplines, as well as 2D and 3D tools, and how you can maintain consistent data while improving engineering and design quality.

OwNER OpERAtORS

Brownfield Design Base Capture and MaintenanceAdrian Park, Dell Wilson, and Ray Howarth, Intergraph

As the cost of laser scanning decreases and the speed of scanning increases, owner operators are increasingly adopting this technology as part of a strategy to capture the design base of brownfield facilities. This session will show how laser scans can be intelligently integrated with the rest of the engineering design base, and how complementary technologies can create structured information from legacy unstructured documentation. Real-world examples where this technology has been adopted will be highlighted in this session. Once the engineering design base has been established, it is important that changes are properly managed to demonstrate compliance for regulatory authorities, and changes to the engineering design base are reflected in associated systems such as CMMS, reliability, and inspection systems. This session will also cover Intergraph’s solutions to support change.

CAPEX and OPEX Project DeliveryAdrian Park and Dell Wilson, Intergraph

SPO supports the delivery of both greenfield and brownfield projects. This session will introduce a requirements and tracking solution that traces legislative, regulatory authority, corporate, and user requirements, and how these are satisfied on a user’s plant. This session will also cover how SPO solutions help to manage interfaces between project stakeholders, technical queries, non-conformities, and changes. The cost of handover of information and documentation to operations from projects can exceed 1% TIC and take over 12 months from plant start-up. In this session, you will learn how Intergraph’s solutions enable handover and verification of a high-quality engineering design base.

Process Safety and Asset Integrity Management SolutionsAdrian Park and Ray Howarth, Intergraph

Owner operators are increasingly adopting international standards for process safety management (PSM) and asset integrity management (AIM) as a result of demands from regulatory authorities and insurance companies, as well as to ensure safe and sustainable production. This session will show how Intergraph’s solutions can support the implementation of process safety and asset integrity programs. The typical elements in a PSM standard will be analysed against Intergraph’s solutions for the development and maintenance of the engineering design base, and how this can be used as an intelligent platform to support PSM and AIM.



12

ENtERpRiSE

SmartPlant Enterprise: Streamlining Enterprise IntegrationAllen Egnor, Intergraph

Continuing the themes from the SmartPlant Foundation session, you will learn about the significant new features that Intergraph has added in SmartPlant Enterprise integration, designed to increase productivity and enhance performance. This session will discuss key workflow improvements in SmartPlant P&ID to SmartPlant 3D correlation, data loading, in-tool revisioning, managing to-do lists, and massive performance increases in the management of integrated data. Along with the technology, this session will also cover a new approach to work process documentation, helping you to map SmartPlant Enterprise capabilities to your engineering work processes. The Enterprise Work Processes and Integration Capability Statement documents are available now to ensure successful deployments of SmartPlant Enterprise.

Introducing SmartPlant FusionSupratim Mukhopadhyay, Intergraph

Learn more about SmartPlant Fusion, Intergraph’s new solution that utilises SmartPlant Foundation’s well-known structured information handling capabilities to load and visualise unstructured information, ranging from scanned images, PDF files, vendor documents, through to native CAD files and semi-intelligent engineering lists via quick view web-based portals. SmartPlant Fusion makes use of various technologies for the extraction of intelligence from the myriad of unstructured data and documents, such as OCR-ing, intelligent format recognition, and aliasing to allow searching and graphical navigation across the entire set of unstructured information. This innovative solution also provides two-way navigation between CAD files and hot-linked laser scans of a plant, allowing identification of out-of-date drawings and facilitating an intelligent as-built process. This session is a must for any owners dealing with brownfield/legacy information, or EPCs dealing with information such as vendor documents, but at a loss on how to extract value and manage these sources in a simple and cost-effective manner.

Improving the User Experience: Intergraph’s User Experience and Mobile StrategyAllen Egnor, Intergraph

“Most people make the mistake of thinking design is what it looks like. People think it’s this veneer – that the designers are handed this box and told, “Make it look good!” That’s not what we think design is. It’s not just what it looks like and feels like. Design is how it works and how people interact with it.” – Steve Jobs Intergraph has made considerable investments in user experience expertise to change our software to align more readily with enterprise work processes. This session will discuss SmartPlant Enterprise’s “user experience” strategy and demonstrate elements of this vision on mobile devices, role-based portals, and turning complex data into streamlined information.

Methodology for Optimal SmartPlant Enterprise PerformanceHyun Kim, Intergraph

This session will outline the best strategy for the implementation of SmartPlant Enterprise to deliver optimal performance.



13

ENGiNEERiNG & SChEmAtiCS

Making the Right Decision EarlyZur Bar, Intergraph

Making changes late in the project cycle is high-risk and often very costly. How can you address this risk while also driving quality and consistency in the engineering design? This session will introduce SmartPlant P&ID Engineering Integrity, which allows you to enforce engineering, safety, and operational practices early on in the design. See how experience can be captured and applied to projects across the company. This is a game-changing solution that is innovative and has a very clear value proposition. In this session, learn how to make the right decisions early and reduce the risk of late changes, compromises, and increase the overall design quality on your projects.

Smart Project Execution with Engineering & SchematicsZur Bar, Intergraph

Consistency of data across multiple disciplines is the minimum requirement for today’s mega projects. Strategising upfront for sharing data effectively is the key to a successful project. A few simple guidelines make all the difference between getting it right for a smart, effective project executing, and getting it wrong where it could cost millions and long delays. In this session, learn about the guidelines and strategies to make this important task easy, and the tools to help you get it right the first time.

Leveraging Engineering & Schematics in Engineering and Operational TasksZur Bar, Intergraph

Design data is a valuable asset for the life of the plant from initial design to plant operations. In this session, you will learn how Intergraph’s Engineering & Schematics solutions not only help to get the design correct upfront, but how that valuable data is an asset for the life of the plant. This session will demonstrate how Engineering & Schematics solutions improve design, quality, commissioning, handover, operations, maintenance, and modifications.

iNDuStRy

Intergraph Solutions for the Power Generation IndustrySteve Furze, Intergraph

This session will provide an overview of Intergraph Process, Power & Marine’s activities and solutions for conventional and nuclear power-generating plants. You will learn more about the solutions for newbuilds, nuclear decommissioning projects, and configuration and information management systems for generating plant projects and operational plants of all kinds. In this session, learn how Intergraph solutions and consultants can help you to meet current needs and explore new opportunities for your power-related business.

Leica Geosystems Solutions for Intergraph PP&MFaheem Khan, Leica Geosystems

Leica Geosystems is one the world’s largest supplier of geospatial technology products, delivering trusted solutions supporting front-end design, ongoing construction, and full asset management support. This session will explore the various types of customer deployment of geospatial technology products and demonstrates, through case studies, the benefits of using such advanced capabilities to support and validate planning, design, engineering, construction, and management activities with a strong emphasis on the latest in 3D scanning integration.



14

USIS Clash ReportKyu Su Park, USIS

This session will highlight an important tool that is able to manage the SmartPlant 3D modelling interface. You will learn how to modify clash information of SmartPlant 3D modelling with a batch and how you can generate a report on clash easily. This report offers the basic information of clash and a snapshot of clash locations, which is available in SmartPlant 3D and SmartPlant Review.

USIS PIMS for SmartPlant 3DSeung Jo Lee, USIS

This session will highlight an important tool that is able to automate the entry of property information from SmartPlant 3D piping modelling. This tool can verify the data and minimise errors from manual input.

iNtERGRAph CADwORx & ANAlySiS SOlutiONS

CAESAR II, PV Elite & TANK: Improving Engineering Collaboration for SmartPlant EnterpriseMandeep Singh, Intergraph

For 23 years, Intergraph CADWorx® & Analysis Solutions have given thousands of engineers worldwide the ability to quickly, accurately, and reliably evaluate and analyse piping systems, tall towers, horizontal vessels, and heat exchangers. Collaborative information sharing is the foundation upon which our vision of concurrent engineering and design is built. By allowing engineering and design to work together seamlessly, departments achieve tighter integration, resulting in seamless information transfer, transparent revisions, and a drastic reduction in errors, which saves time and money. In this session, you will not only learn how effective this collaboration can be, but also how easily such processes can be put in place. You will also learn more about the latest developments in CAESAR II, PV Elite®, and TANK™, and how these developments can improve your business processes and how these solutions interface with SmartPlant Enterprise.

CADWorx fieldPipe: Capturing Existing Facilities to Create Intelligent DeliverablesVornel Walker and Joe Dixon, Intergraph

This session will demonstrate how you can improve onsite asset acquisition with the use of Leica Total Stations and HDS scanners to develop point cloud data for brownfield projects and the creation of precise site deliverables. Common workflow examples will be employed to demonstrate how you can boost productivity through improved workflow and the automated production of deliverables.

CADWorx Plant Design Suite: Solutions for Less Complex Non-capital ProjectsVornel Walker and Joe Dixon, Intergraph

A large proportion of a plant’s design is made up of piping, all of which needs to interact with other design and engineering disciplines, including civil design and engineering, structural design and analysis, pipe stress analysis, pressure vessel analysis, and so on. In this session, learn how the Intergraph CADWorx Plant Design Suite can help you execute your less complex, non-capital projects, such as skids, plant updates, maintenance, repairs, and operations, more efficiently and accurately. This session will also touch on how to improve onsite asset acquisition, and the use of point cloud data for brownfield projects and the creation of precise site deliverables. Common workflow examples will be employed to demonstrate how you can boost productivity through improved workflow and the automated production of deliverables. This session will also show how the bi-directional links between CADWorx and both CAESAR II and PV Elite enable design and engineering to seamlessly share the exact data, ensuring that all departments remain in sync throughout a project.



15

CAXpertsIntergraph 2012 Asia-Pacific Sponsor

CAXperts develops standardised and customised software solutions, and is well-known for its professional consulting services. These span from business analysis to system architecture, system implementation (including integrations and customisations) to system hosting, and content management to project support services. All the activities are built on Intergraph’s SmartPlant and PDS products. The specialty of CAXperts is the development of useable, workflow-oriented, and efficient IT solutions for increased productivity. The expertise of CAXperts has been proven in innumerable projects around the world. The company has offices in Germany and Singapore, with sales agents in Canada and India. Visit: www.caxperts.com

ARES Software CorporationIntergraph 2012 Asia-Pacific Sponsor

ARES Software, a subsidiary of ARES Holding Company, is a world-class provider of integrated project management solutions. Organisations in more than 50 countries rely on PRISM to manage the engineering and construction of capital projects, enabling them to lower cost, mitigate risk, and improve project performance. Our customers include four of the five top defence agencies, eight of the top 10 mining companies, and countless energy, oil and gas, aerospace, and engineering and construction firms from around the world. With more than 95% repeat business each year, ARES is a results-oriented business partner with a drive towards 100% customer satisfaction. Visit: www.arescorporation.com/prism

USISIntergraph 2012 Korea Sponsor

Continuous variations in a corporation’s business are occurring due to rapidly growing IT technologies. In such an unpredictable IT environment, USIS Company Limited specialises in providing various IT solutions and infrastructure, as well as developing suitable applications to support its customers. USIS was established in 2004, and aims to remain the No. 1 IT service partner by continuously providing creative solutions to meet its customers’ requirements and challenges. Visit: www.usis.kr

SponSorS

INTERGRAPH 2012 KOREA

conference agenda - intergraph · 120 nch – th oor grace ha marigod room a grace room b marigod...

Documents