Success factor industrial remote access – New requirements demand new approaches

Urbanization, globalization, population growth and climate change require new solutions from industry that go far beyond classical remote control and remote monitoring. Industrial communication is vital for high-performance automation applications.With a broad product range for Industrial Remote Communication, we offer the ideal solution for a variety of requirements in terms of availability, flexi-bility and bandwidth. Whether in factory automation, the process industry or public infrastructure sectors – Industrial Remote Communication provides secured and economical remote access to widely distributed machines, plants and applications of all sizes.

Increased productivity with teleservice (remote maintenance/diagnostics)

Machines and plants are increasingly operated in places that are far away from the place of manufacture. Plant manufacturers must nevertheless be able to provide support during commissioning and in the event of a fault. Teleservice or remote maintenance can be used to diagnose and maintain machines and systems from anywhere in the world. This contributes consid-erably to the reduction of on-site service deployments and the associated travel and staff costs. Even plant subsystems and controllers can be remotely programmed or program modules updated with the latest software.

There are a range of possible applications for teleservice, particularly in plant and machine building.

These include:

Remote support during commissioning Remote maintenance of machines Remote support of on-site operating personnel Firmware and program updates Diagnostics, optimization, and fault rectification

SIMATIC NET Selection Tool:www.siemens.com/snst-standalone

Secured remote access for teleservice via SINEMA Remote Connect: remote maintenance of serial machines at different end customers

Mobilewireless network

VPN tunnel

Service Center

Internetconnection

MachineFactoryOfficeCustomer A Customer B Customer C Customer D

Service technician (mobile)

Internet connection Wired internet

OpenVPN Client

SCALANCE M804PB + KEY-PLUG

SINEMA Remote Connect

Industrial Ethernet

SCALANCE M876-4 + KEY-PLUG

G_I

K10

_XX

_303

70

SCALANCE S615 + KEY-PLUG

SCALANCE SC642-2C

PROFIBUS

Industrial Remote Communication

siemens.com/teleservice

Components for TeleserviceOrdering overview – Edition 06/2018

www.siemens.com/teleservice

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual use do not always ap-ply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifica-tions are subject to change without notice. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.

Siemens AGProcess Industries and DrivesProcess AutomationPostfach 48 4890026 NürnbergGermany

© Siemens AG 2018Subject to change without prior noticeArticle No. 6ZB5530-1CF02-0BA3W-FPN8Z-PD-PA213 / Dispo 26000BR 0518 3. LMB 12 EnPrinted in Germany

Security information

Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks.In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for pre-venting unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial security measures that may be implemented, please visithttp://www.siemens.com/industrialsecurity

Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under http://www.siemens.com/industrialsecurity.

www.siemens.com/teleservice

Ordering overview for Industrial Remote Communication – TeleserviceRemote networks – components for remote communication over public or private, heterogeneous networksApplication Product Comments Article no. 1)

Management platform for secured connections and simple remote access

SINEMA Remote Connect Virtual Appliance Basic software package for 4 VPN connections;SINEMA Remote Connect Client, license key on USB stick

6GK1720-1AH01-0BV0

SINEMA Remote Connect Upgrade 64 Upgrade of 64 VPN connections 6GK1722-1JH01-0BV0SINEMA Remote Connect Upgrade 256 Upgrade of 256 VPN connections 6GK1722-1MH01-0BV0SINEMA Remote Connect Upgrade 1024 Upgrade of 1024 VPN connections 6GK1722-1QH01-0BV0SINEMA Remote Connect Client OpenVPN client for connecting to SINEMA Remote Connect,

license key on USB stick6GK1721-1XG01-0AA0

KEY-PLUG SINEMA RC Swap medium for activating the connection of SCALANCE M-800/ S615 to SINEMA Remote Connect with auto configuration

6GK5908-0PB00

SINEMA Remote Connect connection with auto configurationIndustrial Router SCALANCE M Industrial Security Appliances SCALANCE S Communications Processors (CPs)SCALANCE M804PB SCALANCE M876-3

yes, with KEY-PLUG SINEMA RC

SCALANCE S615 yes, with KEY-PLUG SINEMA RC CP 1243-1 ab FW V3.1SCALANCE M816-1 SCALANCE M876-4 SCALANCE SC632-2C

yes

CP 1243-7 ab FW V3.1SCALANCE M826-2 SCALANCE SC636-2C CP 1543SP-1 ab FW V2.0SCALANCE M874-2 SCALANCE SC642-2CSCALANCE M874-3 SCALANCE SC646-2C

SOFTNET Security ClientSoftware for establishing secured connections

SOFTNET Security Client SIMATIC NET Ind. EthernetSOFTNET Security Client V5; SW for setting up secured IP-based VPN connections from a PC/PG to network segments secured by SCALANCE S, SCALANCE M and Security CPs license key on USB stick

6GK1704-1VW05-0AA0

© Siemens AG 2018

Ordering overview for Industrial Remote Communication – Teleservice

Remote networks – components for remote communication over public or private, heterogeneous networksApplication Product Network

type 1Network type 2

Interfaces Comments Article no. 1)

Modems and routers

SCALANCE M804PB PROFIBUS/ MPI 2 x RJ451 x RS-485

Router for connecting PROFIBUS/MPI automation devices to Ethernet net-works (VPN with IPsec/OpenVPN 2)); SINEMA Remote Connect connection with auto configuration

6GK5804-0AP00-2AA2

SCALANCE M812-1

Industrial Ethernet

Internet (DSL)

1 x RJ451 x RJ12

ADSL2+ ANNEX A 6GK5812-1AA00-2AA2ADSL2+ ANNEX B, J 6GK5812-1BA00-2AA2

SCALANCE M816-1 4 x RJ451 x RJ12

ADSL2+ ANNEX A; SINEMA Remote Connect connection with auto configuration

6GK5816-1AA00-2AA2

ADSL2+ ANNEX B, J; SINEMA Remote Connect connection with auto configuration

6GK5816-1BA00-2AA2

SCALANCE M826-2 2-wire (SHDSL) 4 x RJ452 x terminal block (2-pin)

SHDSL; SINEMA Remote Connect connection with auto configuration

6GK5826-2AB00-2AB2

SCALANCE M874-2 Mobile wireless GSM(2G)

2 x RJ451 x SMA antenna connection

IP router for transparent data transfer between Ind. Ethernet and mobile wireless network 2G (VPN with IPsec/OpenVPN 2)); SINEMA Remote Connect connection with auto configuration

6GK5874-2AA00-2AA2

SCALANCE M874-3 Mobile wireless GSM (2G), UMTS (3G)

IP router for transparent data transfer between Ind. Ethernet and mobile wireless network 3G (VPN with IPsec/OpenVPN 2)); SINEMA Remote Connect connection with auto configuration

6GK5874-3AA00-2AA2

SCALANCE M876-3 Mobile wireless GSM (2G), UMTS (3G)/CDMA2000(EV-DO)

4 x RJ452 x SMA antenna connection

IP router for transparent data transfer between Ind. Ethernet and 3G mobile wireless network (VPN with IPsec/OpenVPN 2)); SINEMA Remote Connect connection with auto configuration

6GK5876-3AA02-2BA2

SCALANCE M876-4 (EU)

Mobile wirelessGSM (2G), UMTS (3G), LTE (4G)

4 x RJ452 x SMAantenna connection

IP router for transparent data transfer between Ind. Ethernet and mobile wireless network 4G (VPN with IPsec/OpenVPN 2)); SINEMA Remote Connect connection with auto configuration

6GK5876-4AA00-2BA2

SCALANCE M876-4 (NAM)(for use in NorthAmerica)

6GK5876-4AA00-2DA2

RUGGEDCOM RX1400

4 x RJ455 x SMA antenna connection (mobile wireless, WLAN and GPS)

Advanced small form factor rugged mobile wireless router with integrated Ethernet Switch, Wireless LAN, Serial Device Ser ver, GPS and Virtual Process-ing Engine for third-party appli ca tions

6GK6014-0MA2..-....

Industrial Security Appliances

SCALANCE SC632-2C

Industrial Ethernet

2 x RJ452 x Combo Port with RJ45 or SFPs

Protection of devices and networks with firewall; additional functions: address translation with NAT/NAPT; SINEMA Remote Connect connection with auto configuration

6GK5632-2GS00-2AC2

SCALANCE SC636-2C 4 x RJ452 x Combo Port with RJ45 or SFPs

6GK5636-2GS00-2AC2

SCALANCE S615 5 x RJ45 Protection of devices and networks with firewall and VPN (VPN with IPsec/OpenVPN 2)); SINEMA Remote Connect connection with auto configuration

6GK5615-0AA00-2AA2

SCALANCE SC642-2C 2 x RJ452 x Combo Port with RJ45 or SFPs

Protection of devices and networks with firewall and VPN (up to 200 IPsec tunnel 2)); additional functions: address translation with NAT/NAPT; SINEMA Remote Connect connection with auto configuration

6GK5642-2GS00-2AC2

SCALANCE SC646-2C 4 x RJ452 x Combo Port with RJ45 or SFPs

6GK5646-2GS00-2AC2

Accessories

SCALANCE M/S615 desktop stand Desktop stand for table mounting of SCALANCE M812/ M816/ M874-x/ M876-x/ S615/ TAP104

6GK5898-8MD00

SCALANCE M-800/S615 19" mounting frame SCALANCE M-800/S615 19" mounting frame for 19" racks for SCALANCE S615/ TAP104

6GK5898-8MR00

Mobile wireless antenna ANT794-3M, flat antenna, 1.2 m connecting cable connected permanently to the antenna

For use in GSM networks 6NH9870-1AA00

Mobile wireless antenna ANT794-4MR, flat antenna, 5 m connecting cable connected permanently to the antenna

For use in GSM/UMTS and LTE networks

6NH9860-1AA00

Mobile wireless antenna ANT896-4MA, direct installation with SMA connection method

6GK5896-4MA00-0AA3

Mobile wireless antenna ANT896-4ME, compact design IP66, incl. 1x N-Connect female connection

6GK5896-4ME00-0AA0

Mobile wireless antenna ANT896-6MH, suitable for railway applica-tions, installation on vehicle roof possible, incl. 1x N-Connect female connection

6GK5896-6MH00-0AA0

Mobile wireless antenna ANT896-6MM, E1 approval, incl. 3 x pigtail with QMA connector, incl. GPS and WLAN connection, installation possible on vehicle roof, appropriate cables for railway applications can be ordered separately

6GK5896-6MM00-0AA0

LP798-1N lightning protector 2 N-Connect female connectors, 0 ... 6 GHz, IP68

6GK5798-2LP00-2AA6

Cabinet feedthroughs N/N female/female 2 N-Connect female connectors, 0 ... 11 GHz, IP68

6GK5798-2PP00-2AA6

Elbow adapter SMA/SMA male/female 6GK5898-1CV00-4AA0SIMATIC NET N-Connect/SMA male/male Flexible connection cable Length 0.3 m 6XV1875-5LE30

Length 1 m 6XV1875-5LH10Length 2 m 6XV1875-5LH20Length 5 m 6XV1875-5LH50

SIMATIC NET N-Connect male/male flexible connection cable Length 1 m 6XV1875-5AH10Length 2 m 6XV1875-5AH20Length 5 m 6XV1875-5AH50Length 10 m 6XV1875-5AN10

SIMATIC NET QMA/N-Connect male/female flexible connecting cable (3 units)

Length 1m 6XV1875-5JH10

Industrial Security communications processors (CPs) with IPsecApplication Product Network

type 1Network type 2

Interfaces Comments Article no. 1)

Security communi-cations processors

CP 1243-1

Industrial Ethernet

1 x RJ45 For connection of SIMATIC S7-1200 as an additional Ethernet interface and for connection to control centers via tele-control protocols (DNP3, IEC 60870, TeleControl Basic), security (firewall, VPN); SINEMA Remote Connect connec-tion with auto configuration

6GK7243-1BX30-0XE0

CP 1243-71 x SMA antenna connection for LTE

For connection of SIMATIC S7-1200 to the 4G mobile wireless network (LTE); note country approvals; SINEMA Remote Connect connection with auto configuration

6GK7243-7KX30-0XE0

CP 1243-7 (US version)

6GK7243-7SX30-0XE0

CP 1543-1 1 x RJ45 For connection of SIMATIC S7-1500 to Ind. Ethernet; integrated security functions (firewall, IPsec) as well as support of FTPS and SNMPv3 protocols for data encryption

6GK7543-1AX00-0XE0

CP 1543SP-1 Industrial Ethernet via BusAdapter (BA), 2 ports (RJ45 or FO) depen-ding on BA type

For connection of distributed control-ler SIMATIC ET 200SP to Ind. Ethernet with 2-port switch (RJ45) and inte grated security functions (firewall, IPsec); SINEMA Remote Connect con-nection with auto configuration

6GK7543-6WX00-0XE0

CP 343-1 Advanced

Industrial Ethernet

PROFINET/Industrial Ethernet

1 x RJ45 + 2 x RJ45

For connection of SIMATIC S7-300 to Ind. Ethernet; integrated security functions (firewall, IPsec); additional integrated switch for Product Notification (2nd interface) and Layer 3 routing functionality

6GK7343-1GX31-0XE0

CP 443-1 Advanced 1 x RJ45 + 4 x RJ45

For connection of SIMATIC S7-400 to Ind. Ethernet; integrated security functions (firewall, IPsec); additional integrated switch for Product Notification (2nd interface) and Layer 3 routing functionality

6GK7443-1GX30-0XE0

CP 1628 IndustrialEthernet

2 x RJ45 For connection of PC/IPC to Industrial Ethernet with 2-port switch (RJ45) and integrated security (firewall, IPsec) via HARDNET-IE S7 and S7-Redconnect

6GK1162-8AA00

SIMATIC TeleService

TeleService Adapters

TS Adapter II Analog Analog

MPI/PROFIBUS 1 x RS 232

SIMATIC S7, TS Adapter IIfor SIMATIC TeleService RS 232 and integrated analog modem, connection to MPT/DP, power supply MPI or exter-nal 24 V, parameterization via USB

6ES7972-0CB35-0XA0

TS Adapter II ISDN ISDN SIMATIC S7, TS Adapter II ISDN for SIMATIC TeleService RS 232 and inte-grated ISDN modem, MPI/DP connec-tion, power supply MPI or external 24 V, parameterization via USB

6ES7972-0CC35-0XA0

TS Adapter IE Basic

By means of TS module

Industrial Ethernet 1 x RJ45

Network type dep.on connected module

6ES7972-0EB00-0XA0

TS Adapter IE Advanced

Network type dep.on connected module

6ES7972-0EA00-0XA0

Additional modules for TeleService Adapter

TS module GSM GSM Connection to TS Adapter IE Basic and TS IE Advanced

6GK7972-0MG00-0XA0

TS module modem AnalogConnection to TS Adapter IE Basic

6ES7972-0MM00-0XA0TS module ISDN ISDN 6ES7972-0MD00-0XA0TS module RS 232 RS 232 6ES7972-0MS00-0XA0

Software for TeleService Adapter

SIMATIC TeleServicesoftware

SIMATIC S7, TeleService V6.1 floating license E-SW, SW and documentation on CD, license key on USB stick

6ES7842-0CE00-0YE0

SIMATIC S7, TeleService V6.1 upgrade floating license E-SW, SW and docu-mentation on CD, license key on USB stick

6ES7842-0CE00-0YE4

Accessories Mounting adapter for S7-300 rail 60 mm

Installation of TS Adapter IE Basic and TS IE Advanced on SIMATIC S7-300 mounting rail

6ES7972-0SE00-7AA0

1) Current ordering data can be found on the Internet at: www.siemens.com/industrymallConditions of sale and delivery can be found at: www.siemens.com/automation/salesmaterial-as/catalog/en/terms_of_trade_en.pdf

2) For connection to SINEMA Remote Connect

© Siemens AG 2018