COMPLETE LIST OF ALL SAP ABAP KEYWORDS.

Alphabetical Overview of all SAP ABAP Commands or Keywords.

A

ADD for single fields

Adds two single fields.

Syntax

ADD TO .

The contents of are added to the contents of and the results are stored in . This is equivalent to: = + .

More…

ADD for field sequences

Adds sequences of fields in storage.

Syntax

ADD THEN UNTIL GIVING .

ADD THEN UNTIL ACCORDING TO GIVING .

ADD THEN UNTIL TO .

ADD FROM TO GIVING .

If , ,…, is a sequence of fields with the same distance to one another and if they have the same type and length, these fields are added and

the result is stored in . Different variants allow you to limit fields to a subsequence, to include in the sum, and to perform the operation on a

sequence of fields that directly follow one another.

ADD-CORRESPONDING

Adds subfields of structures.

Syntax

ADD-CORRESPONDING TO .

All the subfields of the structures and having the same name are added and the results are stored in .

ALIASES

Defines class-specific alias names for an interface component in ABAP objects.

Syntax

ALIASES FOR .

is defined within a class or interface as synonymous with the interface component .

APPEND

Appends a line or multiple lines to the end of an index table.

Syntax

APPEND |LINES OF TO

[ASSIGNING | REFERENCE INTO ].

A line or multiple lines of an internal table are appended to index table . If you use ASSIGNING or INTO REFERENCE, field symbol refers

to the appended line or the relevant data reference is stored in after the statement.

ASSIGN

Assigns a field to a field symbol.

Syntax

ASSIGN [INCREMENT ] TO

[CASTING [TYPE |LIKE ] [DECIMALS ]] [RANGE ].

Data object is assigned to field symbol . now points to the data object. After the addition INCREMENT , the storage area that is offset times

by a length of starting with is assigned to the field symbol. Pointed brackets are part of the syntax for field symbol names. The CASTING

addition permits you to cast data objects when assigning field symbols. The RANGE addition defines the storage area in which either

offset/length accesses or the INCREMENT addition are allowed. In Unicode programs, standard access is only allowed within the field

limits of , but this can be extended with RANGE. In non-Unicode programs, standard access is possible up to the boundary of the data

segment and can be limited with RANGE.

Syntax

ASSIGN ->* TO [CASTING ... ].

Dereferencing of the data reference in . The data object to which the data reference refers is assigned to field symbol .

AT for event blocks

Event keywords for defining event blocks for screen events.

Syntax

AT SELECTION-SCREEN…

AT LINE-SELECTION.

AT USER-COMMAND.

AT PFn.

User actions on a selection screen or on a list trigger certain events in the ABAP runtime environment. The event keywords define event

blocks that are called when events occur.

AT for group change

Change of group when processing loops of extracts and internal tables.

Syntax

AT NEW .

AT END OF .

AT FIRST.

AT LAST.

AT .

The statements are used to process group levels within a loop using an extract dataset or an internal table. They introduce statement

blocks that must be closed with ENDAT. The statements between AT and ENDAT are only executed if the corresponding group change

occurred.

AUTHORITY-CHECK

Checks user authorization.

Syntax

AUTHORITY-CHECK OBJECT ID FIELD

ID FIELD

…

ID FIELD .

There is a check if the program user has all the authorizations defined in authorization object . ,…, are the authorization fields of the

authorization object. ,… , …, are data objects of the program. The value of the data objects is checked against the authorization fields.

B

BACK

Relative position of the output in a list.

Syntax

BACK.

Positions the list output either in the first column of the first line following the page header of the current page or in connection with

RESERVE in the first column of the first line of a line block.

BREAK-POINT

Calls the Debugger.

Syntax

BREAK-POINT.

Interrupts execution of the program and goes to debugging mode. Is used as a test help. Normal program processing is interrupted when

this statement is reached and the system goes to a debugger.

C

CALL CUSTOMER-FUNCTION

Calls the customer function modules.

Syntax

CALL CUSTOMER-FUNCTION …

Similar to CALL FUNCTION. The function modules must be programmed and activated within the customer’s modification concept.

CALL FUNCTION

Calls the function modules.

Syntax

CALL FUNCTION [EXPORTING ... fi = a i... ]

[IMPORTING ... fi = a i... ]

[CHANGING ... fi = a i... ]

[TABLES ... fi = a i... ]

[EXCEPTIONS... ei = r i... ]

[DESTINATION ]

[IN UPDATE TASK]

[STARTING NEW TASK]

[IN BACKGOUND TASK].

The program calls either a function module in the same R/3 System, or one from an external system, depending on the variant of the

statement you use. You can call update modules when processing transactions. You can also call functions asynchronously. The other

additions are used to specify actual parameters for the parameter interface for the function module, , and to handle exceptions.

CALL DIALOG

Calls a dialog module.

Syntax

CALL DIALOG [AND SKIP FIRST SCREEN]

[EXPORTING... fi = a i... ]

[IMPORTING... fi = a i... ]

[USING itab].

Calls the dialog module . A dialog module is an ABAP program with a sequence of screens. It does not have to be started using a

transaction code, or run in the same SAP LUW, like the calling program. The additions are used to skip the initial screen in the sequence

and specify actual parameters for the parameter interface of the dialog module.

CALL METHOD

Calls a method in ABAP Objects.

Syntax

CALL METHOD [EXPORTING ... =.... ]

[IMPORTING ... =.... ]

[CHANGING ... =.... ]

[RECEIVING r = h ]

[EXCEPTIONS... = r i... ]

[PARAMETER-TABLE ]

[EXCEPTION-TABLE ].

[CALL METHOD]( … ).

Calls a method . The additions are used to specify actual parameters for the parameter interface for the function module and to handle

exceptions. The last two additions pass parameters dynamically in a dynamic method call. Alternatively, if the method is called statically,

the parameters can be specified using parenthesis notation (as you can when specifying parameters in a CALL METHOD statement). You

can also use functional methods with this syntax in operand positions.

CALL METHOD OF

Calls a method in OLE2 Automation.

Syntax

CALL METHOD OF .

Calls the method, , of the OLE2 Automation Object, .

CALL SCREEN

Calls a screen sequence.

Syntax

CALL SCREEN

[STARTING AT ]

[ENDING AT ].

Calls the sequence of screens that begins with the screen . All the screens in the screen sequence belong to the current ABAP program.

The screen sequence ends when the program reaches the screen numbered 0. The additions let you call a single screen in a new window.

CALL SELECTION-SCREEN

Calls a selection screen.

Syntax

CALL SELECTION-SCREEN

[STARTING AT ]

[ENDING AT ].

Calls a selection screen defined in an ABAP program. The selection screen is processed in the program in the AT SELECTION-SCREEN

event. The additions let you call a selection screen in a new window.

CALL TRANSACTION

Call a transaction.

Syntax

CALL TRANSACTION

[AND SKIP FIRST SCREEN]

[USING ].

Calls the transaction after having received data from the calling program. At the end of the transaction that has been called, the system

returns to the statement following the call in the calling report. The additions are used to skip the initial screen in the sequence or to pass a

batch input table to the transaction.

CASE

Conditional branch.

Syntax

CASE .

Opens a CASE control structure that ends with an ENDCASE statement. The CASE control structure allows you to control which statement

blocks (introduced by WHEN) are processed, based on the contents of a data object.

CATCH

Catches a class-based exception.

CATCH … [INTO ].

You can only use this statement in a TRY-ENDTRY block, where you define a handler for one or more class-based exceptions. You can

use INTO to place a reference to the exception object into the reference variable .

CATCH SYSTEM-EXCEPTIONS

Catches a catchable runtime error.

Syntax

CATCH SYSTEM-EXCEPTIONS = … = .

Introduces a CATCH area, which ends with an ENDCATCH statement. If a catchable runtime error , occurs between CATCH and

ENDCATCH, the current processing block is interrupted. The system jumps to the appropriate ENDCATCH statement and fills SY-SUBRC

with .

CHECK

Conditionally leaves a loop or processing block.

Syntax

CHECK .

If the logical expression is true, the system continues with the next statement. If it is false, processing within the loop is interrupted at the

current loop pass, and the next loop pass is performed. Otherwise the system leaves the current processing block. In conjunction with

selection tables, and inside GET events, you can use an extra variant of the CHECK statement.

CLASS Declaration

Declares a class in ABAP Objects.

Syntax

CLASS DEFINITION [PUBLIC]

[INHERITING FROM ]

[ABSTRACT]

[FINAL]

[CREATE PUBLIC|PROTECTED|PRIVATE]

[FRIENDS ...]

[DEFERRED]

[LOAD].

Introduces the declaration part of a class, . The declaration part ends with ENDCLASS and contains the declaration of all the components

of the class. The PUBLIC addition is generated only by the Class Builder. It defines a global class in the Class Library. The INHERITING

FROM addition lets you derive the class, , from a superclass, . The ABSTRACT addition defines an abstract class, which cannot be

instantiated. The FINAL addition defines a class that cannot have any subclasses. The CREATE addition specifies who can instantiate the

class. FRIENDS allows you to specify other classes or interfaces, that can access the private components of the class and instantiate

objects of the class, independently of the CREATE addition. The DEFERRED addition makes the class known to the program before it is

declared. The LOAD addition loads a class explicitly from the Class Library.

CLASS – Implementation

Implements a class in ABAP Objects.

Syntax

CLASS IMPLEMENTATION.

Introduces the implementation part of a class, . The implementation part ends with ENDCLASS and contains the implementation of all the

components of the class.

CLASS-DATA

Declares static attributes of a class or interface.

Syntax

CLASS-DATA …

Like DATA. However, the attribute is declared as a static attribute. Static attributes are not instance-specific. Their content is shared by all

instances.

CLASS-METHODS

Declares static methods of a class or interface.

Syntax

CLASS-METHODS …

Like METHODS, except that the method is declared as a static method. A static method can access static attributes and can only trigger

static events.

CLASS-EVENTS

Declares static events of a class or interface.

Syntax

CLASS-EVENTS …

Like EVENTS, except that the event is declared as a static attribute. Static events are the only type of event that can be triggered in a static

method.

CLEANUP

Tidies up after class-based exceptions.

CLEANUP.

Can only be used within a TRY-ENDTRY block, where it defines a control block. If a class-based exception is not caught with a CATCH

statement, the system executes the statements between CLEANUP and ENDTRY, before passing the exception along the call hierarchy.

CLEAR

Sets a variable to its initial value.

Syntax

CLEAR .

The variable , which can have any data type, is set to an initial value appropriate to its type.

CLOSE DATASET

Closes a file.

Syntax

CLOSE DATASET .

Closes a file opened with OPEN DATASET on the application server.

CLOSE CURSOR

Closes a database cursor.

Syntax

CLOSE CURSOR .

Closes a cursor opened with OPEN CURSOR.

COLLECT

Aggregates lines and then adds them to an internal table.

Syntax

COLLECT INTO

[ASSIGNING | REFERENCE INTO ].

The system checks whether there is already a table entry that matches the key. If there is no corresponding entry already in the table, the

COLLECT statement has the same effect as INSERT. If an entry with the same key already exists, the COLLECT statement does not

append a new line, but adds the contents of the numeric fields in the work area to the contents of the fields in the existing entry. If you use

ASSIGNING or INTO REFERENCE, field symbol refers to the inserted line or the relevant data reference is stored in after the statement.

COMMIT

Closes a SAP LUW.

Syntax

COMMIT WORK [AND WAIT]

Writes all the database changes and releases all the database locks. Triggers updating. The AND WAIT addition forces the program to wait

until the system has finished updating the database. Otherwise, updating is asynchronous.

COMMUNICATION

Enables two programs to communicate with each other.

Syntax

COMMUNICATION INIT DESTINATION ID [additions].

COMMUNICATION ALLOCATE ID [additions].

COMMUNICATION ACCEPT ID [additions].

COMMUNICATION SEND ID BUFFER [additions].

COMMUNICATION RECEIVE ID [additions].

COMMUNICATION DEALLOCATE ID [additions].

The statement initializes, creates, and accepts communication between two programs; lets these two programs send and receive data; and

then closes the connection.

COMPUTE

Performs numeric operations.

Syntax

COMPUTE = .

The result of the mathematical operation specified in is assigned to the field . The keyword COMPUTE is optional.

CONDENSE

Removes spaces from a string

Syntax

CONDENSE [NO-GAPS].

This statement removes any leading blanks from the field and replaces other sequences of blanks by exactly one blank. If the addition NO-

GAPS is specified, all blanks are removed.

CONSTANTS

Declares constant data objects.

Syntax

CONSTANTS … VALUE [ | IS INITIAL]…

The syntax is similar to DATA, except that the VALUE addition is required, and that internal tables and deep structures cannot be declared

as constants The start value specified in the VALUE addition cannot be changed during the execution of the program.

CONTINUE

Ends a loop pass.

Syntax

CONTINUE.

Only possible within loops. This statement terminates the current loop pass and starts the next

CONTEXTS

Declares a context.

Syntax

CONTEXTS .

Generates an implicit data type CONTEXT_, which you can use to create context instances

CONTROLS

Defines a control.

Syntax

CONTROLS TYPE .

Defines an ABAP runtime object . This displays data in a particular format on a screen, depending on the type Currently, may be a table

control or tabstrip control

CONVERT für Dates

Converts a data into an inverted date form.

Syntax

CONVERT DATE INTO INVERTED-DATE .

CONVERT INVERTED-DATE INTO DATE .

If and are date fields in the internal form YYYYMMDD, the nines complement of is placed in field and vice versa. In inverted date format,

the most recent date has the smaller numerical value

CONVERT for Timestamps

Converts a timestamp into the correct date and time for the current time zone

Syntax

CONVERT TIME STAMP TIME ZONE INTO DATE TIME .

CONVERT DATE TIME INTO TIME STAMP TIME ZONE .

As long as has type P(8) or P(11) with 7 decimal placed, and has type C(6), the time stamp will be converted to the correct date and time

for the time zone .

CONVERT for Text

Converts a text into a format that can be sorted alphabetically.

Syntax

CONVERT TEXT INTO SORTABLE CODE .

must have type C and must have type X. The string is then converted so that the relative order of the characters allows them to be sorted

alphabetically in the current text environment

CREATE DATA

Creates a dynamic data object.

Syntax

CREATE DATA TYPE |LIKE .

CREATE DATA TYPE LINE OF |LIKE LINE OF .

CREATE DATA TYPE REF TO DATA|.

CREATE DATA TYPE TYPE|LIKE OF WITH .

If is a data reference variable, a data object of the specified type is created. The reference in points to this object. You can omit the TYPE

declaration in fully-typed reference variables.

CREATE OBJECT in ABAP Objects

Instantiates an object in ABAP Objects.

Syntax

CREATE OBJECT [TYPE ] [EXPORTING ... =.... ].

must be a reference variable, defined with reference to a class. CREATE OBJECT then creates an object of that class, to which the

reference in then points The reference in points to this object. If is a typed class reference variable with reference to a subclass of , or if is

an interface reference variable, whose interface is implemented in the class , you can specify the class of the instantiated object explicitly in

a TYPE addition, to establish the dynamic type of the reference variables. The EXPORTING addition specifies the non-optional

IMPORTING parameters of the instance constructor of the class of the instantiated object.

CREATE OBJECT in OLE2 Automation

Instantiates an external object in OLE2 Automation.

Syntax

CREATE OBJECT .

If is a class assigned to an automation server, an initial object of this class is created

D

DATA with Reference to Known Data Types

Declares variables with a previously-declared data type

Syntax

DATA … [TYPE |LIKE ]… [VALUE ].

Declares a variable with the fully-defined data type or the same data type as another data object . The data type can be D, F, I, T, a type

defined locally in the program using the TYPES statement, or a type from the ABAP Dictionary. The data object is a data object or line of an

internal table that has already been defined. The VALUE addition specifies a starting value.

DATA with Reference to Generic Data Types

Declares variables by completing the description of a generic type

Syntax

DATA [()] TYPE [DECIMALS ]… [VALUE ].

DATA TYPE .

The data type can be C, N, P, X, STRING or XSTRING. The option sets the field length. If you omit it, the field length is set to the

appropriate initial value. If is P, you can specify the number of decimal places using the DECIMALS addition. If you omit this, the number of

decimal places is set to 0. If you do not use the TYPE addition, the system uses the default predefined generic type C.

Syntax

DATA TYPE .

The data type is a standard internal table with generic key. The default key is automatically used in the DATA statement.

DATA, Creating an Associated Data Type

Declares variables with data types that only exist as an attribute of the variable.

Syntax

DATA TYPE REF TO |.

The variable is defined as an object reference variable for the class or interface .

Syntax

DATA TYPE REF TO DATA|.

Declares the variable as a data reference variable for a data object.

Syntax

DATA: BEGIN OF ,

…

…,

…

END OF .

Combines the variables to form the structure . The individual variables within a structure are addressed in the program with a hyphen

between the structure name and component name as follows: -.

Syntax

DATA TYPE|LIKE OF WITH .

The variable is declared as an internal table with the table kind , line type , and key .

Syntax

DATA TYPE|LIKE RANGE OF |.

Declares the variable as a RANGES table. A RANGES table has the same data type as a selection table, but is not linked to input fields on

a selection screen.

DATA statement for Shared Data Areas

Declares shared data areas in a program.

Syntax

DATA: BEGIN OF COMMON PART ,

. ..

END OF COMMON PART.

The variables are assigned to a data area , which can be defined in more than one program. These data areas use the same memory

addresses for all programs that are loaded into the same internal session.

DEFINE

Defines a macro.

Syntax

DEFINE .

Introduces the definition of the macro . Each macro must consist of complete ABAP statement and be concluded with the END-OF-

DEFINITION statement.

DELETE for Files

Deletes files on the application server

Syntax

DELETE DATASET .

Deletes the file from the file system of the application server.

DELETE for Database Table Entries

Deletes entries from database tables.

Syntax

DELETE FROM WHERE .

All of the lines in the database table that satisfy the conditions in the WHERE clause are deleted.

Syntax

DELETE FROM .

DELETE FROM TABLE .

This deletes the line that has the same primary key as the work area , or deletes all the lines in the database that have the same primary

key as a line in the internal table . The work area or the lines of the internal table must have at least the same length as the work area of the

database table.

DELETE for Cluster Databases

Deletes data clusters from cluster database tables.

Syntax

DELETE FROM DATABASE () ID .

Deletes the entire cluster in area with the name from the cluster database table .

DELETE for the Cross-Transaction Application Buffer

Deletes data clusters from the cross-transaction application buffer.

Syntax

DELETE FROM SHARED BUFFER () ID .

Deletes the data cluster for the area with the name stored in the cross-transaction application buffer for the table .

DELETE for Lines from an Internal Table

Deletes lines from internal tables of any type.

Syntax

DELETE TABLE FROM .

DELETE TABLE WITH TABLE KEY = … = .

Deletes using the table key. All lines with the same key are deleted. The key values are taken either from a compatible work area or

specified explicitly.

Syntax

DELETE WHERE .

Deletes using conditions. Deletes all table entries that satisfy the logical expression . The logical condition can consist of more than one

comparison. In each comparison, the first operand must be a component of the line structure.

Syntax

DELETE ADJACENT DUPLICATE ENTRIES FROM [COMPARING... ].

Deletes adjacent duplicate entries, either by comparing the key fields or the comparison fields specified explicitly in the COMPARING

addition.

DELETE for Lines from Index Tables

Deletes entries from index tables.

Syntax

DELETE [INDEX ].

If you use the INDEX addition, the line with index is deleted from the table . Without the INDEX addition, you can only use the above

statement within a LOOP. In this case, you delete the current line.

Syntax

DELETE [FROM ] [TO ] [WHERE ].

The system deletes all of the lines of whose index lies between and and who meet the conditions specified in the WHERE clause. If you do

not specify a FROM addition, the system deletes lines from the first line onwards. If you do not specify a TO addition, the system deletes

lines up to the last line. The logical condition can consist of more than one comparison. In each comparison, the first operand must be a

component of the line structure.

DEMAND

Retrieves values from a context instance.

Syntax

DEMAND = … = FROM CONTEXT

[MESSAGES INTO ].

Fills the fields with the values from the context instance . You can handle these messages in your programs by using the MESSAGES

addition.

DESCRIBE DISTANCE

Gets the distance between two fields.

Syntax

DESCRIBE DISTANCE BETWEEN AND INTO [IN BYTE|CHARACTER MODE].

Writes the number of bytes between data objects and into the variable . The length of the first field in memory is always included. In

Unicode programs, you must specify either the IN BYTE MODE or IN CHARACTER MODE addition. In non-Unicode programs, the

distance is returned in bytes.

DESCRIBE FIELD

Describes the attributes of a field.

Syntax

DESCRIBE FIELD [LENGTH [IN BYTE|CHARACTER MODE]]

[TYPE [COMPONENTS ]]

[OUTPUT-LENGTH ] [DECIMALS ]

[EDIT MASK ] [HELP-ID ].

The attributes of the data object specified by the parameters of the statement are written to the variables following the parameters. You can

use any number of the additions in the same statement. In Unicode programs, you must specify either the IN BYTE MODE or IN

CHARACTER MODE addition for LENGTH. In non-Unicode programs, the length is returned in bytes.

DESCRIBE LIST

Describes the attributes of a list.

Syntax

DESCRIBE LIST NUMBER OF LINES [INDEX ].

DESCRIBE LIST NUMBER OF PAGES [INDEX ].

DESCRIBE LIST LINE PAGE [INDEX ].

DESCRIBE LIST PAGE [INDEX ]…

Depending on the variant of the statement that you use, writes the number of lines, number of pages, a line of a list on a given page, or

various attributes of a page to variables.

DESCRIBE TABLE

Describes the attributes of an internal table.

Syntax

DESCRIBE TABLE [LINES ] [OCCURS] [KIND ].

Depending on the additions you use, writes the number of lines occupied, the value specified for the INITIAL SIZE of the table, or the table

type into a corresponding variable.

DIVIDE

Divides one field by another.

Syntax

DIVIDE BY .

Divides the content of by , and places the result in . This is equivalent to: n=n/m.

DIVIDE-CORRESPONDING

Divides matching components of structures.

Syntax

DIVIDE-CORRESPONDING BY .

All the identically-named subfields of the structures and are divided and the results are stored these subfields of .

DO

Introduces a loop.

Syntax

DO [ TIMES] [VARYING FROM NEXT ].

Introduces a statement block that ends with ENDDO. If you omit the TIMES addition, the statement block is repeated until it reaches a

termination statement such as EXIT or CHECK. Use the TIMES addition to restrict the number of loop passes to . The VARYING addition

allows you to process fields the same distance apart in memory.

E

EDITOR-CALL

Loads an ABAP program or internal table into a text editor.

Syntax

EDITOR-CALL FOR …

EDITOR-CALL FOR REPORT …

Loads the internal table or the program into a text editor, where you can edit it using standard editor functions.

ELSE

Introduces a statement block in an IF control structure.

Syntax

ELSE.

If the logical expression in an IF statement is false, ELSE introduces the statement block to be executed instead.

ELSEIF

Introduces a statement block in an IF control structure.

Syntax

ELSEIF .

If the logical expression in an IF statement is false and is true, ELSE introduces the statement block to be executed instead.

END-OF-DEFINITION

Closes a macro definition.

Syntax

END-OF-DEFINITION.

This statement concludes a macro definition introduced with DEFINITION.

END-OF-PAGE

Event keywords for defining event blocks for list events.

Syntax

END-OF-PAGE.

Whenever the page footer is reached while a list is being created, the runtime environment triggers the END-OF-PAGE event, and the

corresponding event block is executed.

END-OF-SELECTION

Event keywords for defining event blocks for reporting events.

Syntax

END-OF-SELECTION.

Once a logical database has read all of the required lines and passed them to the executable program, the runtime environment triggers the

END-OF-SELECTION event, and the corresponding event block is executed.

ENDAT

Closes a statement block in control level processing.

Syntax

ENDAT.

This statement concludes a control level processing block introduced with AT.

ENDCASE

Closes a CASE control structure.

Syntax

ENDCASE.

This statement concludes a control structure introduced with CASE.

ENDCATCH

Closes a CATCH area.

Syntax

ENDCATCH.

This statement concludes an exception handling block introduced with CATCH SYSTEM-EXCEPTIONS.

ENDCLASS

Closes a class definition.

Syntax

ENDCLASS.

This statement concludes a class declaration or implementation introduced with CLASS.

ENDDO

Closes a DO loop.

Syntax

ENDDO.

This statement concludes a loop introduced with DO.

ENDEXEC

Closes a Native SQL statement.

Syntax

ENDEXEC.

This statement ends a Native SQL statement introduced with EXEC SQL.

ENDFORM

Closes a subroutine.

Syntax

ENDFORM.

This statement concludes a subroutine definition introduced with FORM.

ENDFUNCTION

Closes a function module.

Syntax

ENDFUNCTION.

This statement concludes a function module introduced with FUNCTION.

ENDIF

Closes an IF control structure.

Syntax

ENDIF.

This statement concludes a control structure introduced with IF.

ENDINTERFACE

Closes a interface definition.

Syntax

ENDINTERFACE.

This statement concludes an interface definition introduced with INTERFACE.

ENDLOOP

Closes a LOOP.

Syntax

ENDLOOP.

This statement concludes a loop introduced with LOOP.

ENDMETHOD

Closes a method.

Syntax

ENDMETHOD.

This statement concludes a method implementation introduced with METHOD.

ENDMODULE

Closes a dialog module.

Syntax

ENDMODULE.

This statement concludes a dialog module introduced with MODULE.

ENDON

Closes a conditional statement block.

Syntax

ENDON.

This statement ends a conditional statement block introduced with ON CHANGE.

ENDPROVIDE

Closes a PROVIDE loop.

Syntax

ENDPROVIDE.

This statement concludes a loop introduced with PROVIDE.

ENDSELECT

Closes a SELECT loop.

Syntax

ENDSELECT.

This statement concludes a loop introduced with SELECT.

ENDTRY

Closes a TRY area.

Syntax

ENDTRY.

This statement concludes a control structure introduced with TRY.

ENDWHILE

Closes a WHILE loop.

Syntax

ENDWHILE.

This statement concludes a loop introduced with WHILE.

EVENTS

Defines events in classes or interfaces.

Syntax

EVENTS EXPORTING.. VALUE() TYPE type [OPTIONAL]…

The event can be declared in the declaration part of a class or within an interface definition, and may have EXPORTING parameters that

are passed to the event handler. The parameters are always passed by value.

EXEC SQL

Introduces a Native SQL statement.

Syntax

EXEC SQL [PERFORMING

].

Between EXEC SQL and the ENDEXEC statement, you can include a database-specific Native SQL statement. The PERFORMING

addition allows you to pass a multiple-line selection line by line to a subroutine.

EXIT

Leaves a loop or processing block.

Syntax

EXIT.

Within a loop: The entire loop is terminated, and processing continues with the first statement following the loop. Outside a loop:

Terminates the current processing block. In a reporting event: Jumps directly to the output list.

EXIT FROM STEP-LOOP

Ends a step loop.

Syntax

EXIT FROM STEP-LOOP.

Terminates step loop processing. A step loop is ais a way of displaying a table on a screen.

EXIT FROM SQL

Ends Native SQL processing.

Syntax

EXIT FROM SQL.

This statement may occur within a subroutine called using the PERFORMING addition in the EXEC SQL statement. The entire subroutine

is processed, but no more subsequent lines of the selection are processed.

EXPORT

Exports data clusters.

Syntax

EXPORT… [FROM ]… | ()

TO MEMORY

| DATABASE () ID()

| SHARED BUFFER () ID().

The data objects or , or the data objects in the internal table are stored as a data cluster in the cross-program ABAP memory of the current

internal session, in a cluster database table , or in the cross-transaction application buffer of the table .

EXTRACT

Creates an extract dataset and adds lines to it.

Syntax

EXTRACT .

With the first EXTRACT statement of a program, the system creates the extract dataset and adds the first extract record. In each

subsequent EXTRACT statement, the new extract record is added to the dataset. Each extract record contains exactly those fields that are

contained in the field group , plus the fields of the field group HEADER (if one exists).

F

FETCH

Uses a cursor to read entries from a database table.

Syntax

FETCH NEXT CURSOR INTO .

If the cursor is linked with a selection in a database table, FETCH writes the next line of the selection into the flat target area .

FIELD-GROUPS

Declares a field group for an extract dataset.

Syntax

FIELD-GROUPS .

This statement defines a field group . Field groups define the line structure of an extract dataset. You can also define a special field group

called HEADER: When filling the extract dataset, the system automatically prefixes any other field groups with this field group.

FIELD-SYMBOLS

Declares field symbols.

Syntax

FIELD-SYMBOLS [|STRUCTURE DEFAULT ].

Field symbols are placeholders or symbolic names for other fields. Pointed brackets are part of the syntax for field symbol names. The

addition allows you to specify the type of a field symbol. The STRUCTURE addition forces a structured view of the data objects that you

assign to the field symbol.

FIND

Searches for patterns.

Syntax

FIND

IN [SECTION OFFSET LENGTH OF]

[IGNORING CASE|RESPECTING CASE]

[IN BYTE MODE|IN CHARACTER MODE]

[MATCH OFFSET ] [MATCH LENGTH ].

The system searches the field for the pattern

. The SECTION OFFSET LENGTH OF addition tells the system to search only from the position in the length . IGNORING CASE or

RESPECTING CASE (default) specifies whether the search is to be case-sensitive. In Unicode programs, you must specify whether the

statement is a character or byte operation, using the IN BYTE MODE or IN CHARACTER MODE (default) additions. The MATCH OFFSET

and MATCH LENGTH additions set the offset of the first occurrence and length of the search string in the fields

and .

FORM

Defines a subroutine.

Syntax

FORM [USING ... [VALUE(] [)] [TYPE |LIKE ]… ]

[CHANGING... [VALUE(] [)] [TYPE |LIKE ]… ].

Introduces a subroutine

. The USING and CHANGING additions define the subroutine’s parameter interface. The subroutine end with ENDFORM.

FORMAT

Sets formatting options for list output.

Syntax

FORMAT… [ON|OFF]…

The formatting options (such as color) set in the FORMAT statement, apply to all subsequent output until they are turned off using the OFF

option.

FREE

Release space in memory.

Syntax

FREE .

FREE MEMORY ID().

FREE OBJECT .

This statement deletes an internal table, a data cluster in ABAP memory, or an external object in OLE2 Automation, depending on the

variant of the statement used.

FUNCTION

Defines a function module.

Syntax

FUNCTION .

Introduces the function module . This statement is not entered in the ABAP Editor, but is automatically generated by the Function Builder in

the ABAP Workbench. The function module definition ends with the ENDFUNCTION statement

FUNCTION-POOL

Introduces a function group.

Syntax

FUNCTION-POOL.

The first statement in a function group. This statement is not entered in the ABAP Editor, but is automatically generated by the Function

Builder in the ABAP Workbench. A function group is an ABAP program that contains function modules.

G

GET

Event keyword for defining event blocks for reporting events.

Syntax

GET [FIELDS ...].

Only occurs in executable programs. When the logical database has passed a line of the node to the program, the runtime environment

triggers the GET event, and the corresponding event block is executed. You can use the FIELDS option to specify explicitly the columns of

a node that the logical database should read.

GET BIT

Reads an individual bit.

Syntax

GET BIT OF INTO .

Reads the bit at position of the hexadecimal field into the field .

GET CURSOR

Gets the cursor position on a screen or in an interactive list event.

Syntax

GET CURSOR FIELD [OFFSET ] [LINE ]

[VALUE ] [LENGTH ].

GET CURSOR LINE [OFFSET ] [VALUE ] [LENGTH ].

At a user action on a list or screen, the statement writes the position, value, and displayed length of a field or line into the corresponding

variables.

GET DATASET

Syntax

GET DATASET [POSITIONS ]

[ATTRIBUTE ].

Gets the attributes of a file opened using OPEN DATASET. The POSITIONS additions writes the current read/write position to the field .

The ATTRIBUTE addition writes the attributes to a structure, , of the type DSET_ATTRIBUTES.

GET LOCALE LANGUAGE

Gets the current text environment.

Syntax

GET LOCALE LANGUAGE COUNTY MODIFIER .

Returns the current language, country ID and any modifier into the corresponding variables

GET PARAMETER

Gets an SPA/GPA parameters

Syntax

GET PARAMETER ID FIELD .

Writes the value of the SPA/GPA parameter from the user-specific SAP memory into the variable .

GET PF-STATUS

Gets the current GUI status.

Syntax

GET PF-STATUS [PROGRAM ] [EXCLUDING ].

Returns the name of the current GUI status (the same as SY-PFKEY) into the variable . The PROGRAM addition writes the name of the

ABAP program to which the status belongs into the variable . The EXCLUDING addition returns a list of all currently inactive function codes

into the internal table .

GET PROPERTY

Gets a property of an OLE2 Automation object.

Syntax

GET PROPERTY OF

= .

Writes the property

of an external OLE2 Automation object to the variable .

GET REFERENCE

Gets a data reference.

Syntax

GET REFERENCE OF INTO .

Writes a data reference to an existing data object to the data reference variable .

GET RUN TIME FIELD

Measures the runtime in microseconds.

Syntax

GET RUN TIME FIELD .

The first time the statement is executed, the variable is set to zero. In each subsequent call, the runtime since the first call is written to .

GET TIME

Synchronizes the time.

Syntax

GET TIME [FIELD ].

Refreshes the system fields SY-UZEIT, SY-DATUM, SY-TIMLO, SY-DATLO, and SY-ZONLO. The FIELD addition fills the variable with the

current time.

GET TIME STAMP FIELD

Returns a time stamp.

Syntax

GET TIME STAMP FIELD .

Returns the short or long form of the current date and time, depending on whether the variable has the type P(8) or P(11). The long form

returns the time correct to seven decimal places.

H

HIDE

Stores information about list lines.

Syntax

HIDE .

While the list is being created, this statement stores the contents of the field and the current line number in the internal HIDE area When the

cursor is positioned on a line in an interactive list event, the stored value is returned to the field .

I

IF

Conditional branch.

Introduces a new branch.

Syntax

IF .

Opens an IF control structure that ends with an ENDIF statement. The system evaluates the logical expression , and processes different

statement blocks depending on the result.

IMPORT

Imports data clusters.

Syntax

IMPORT… [TO ]… | ()

FROM MEMORY

| DATABASE () ID()

| SHARED BUFFER () ID().

The data objects or , or the data objects in the internal table are read from data clusters, either in the cross-program ABAP memory of the

current internal session; in a cluster database table ; or in the cross-transaction application buffer of the table and written to the variables

and .

IMPORT DIRECTORY

Creates the directory of a data cluster from a cluster database.

Syntax

IMPORT DIRECTORY INTO

FROM DATABASE ()

Id .

Writes a directory of the data objects belonging to a data cluster in the cluster database to the internal table .

In the third variant, the table contains a directory of the objects stored using EXPORT TO DATABASE.

INCLUDE

Inserts an include program in another program.

Syntax

INCLUDE .

Has the same effect as copying the source code of the include program into the program. Include programs are not loaded at runtime, but

are expanded when the program is generated. Include programs must have the program type I.

INCLUDE TYPE|STRUCTURE

Includes a structure within another.

Syntax

INCLUDE TYPE |STRUCTURE [AS [RENAMING WITH SUFFIX ]].

Within a structure declared using TYPES|DATA BEGIN OF, copies a structured datatype , or a structure already available as a data object,

as part of the structure declaration. The AS addition lets you address the individual components using the name . The RENAMING addition

lets you append a suffix, , to , so that you can copy the same structure several times.

INITIALIZATION

Event keywords for defining event blocks for reporting events.

Syntax

INITIALIZATION.

Only occurs in executable programs. The ABAP runtime environment triggers the INITIALIZATION event before the selection screen is

processed, at which point the corresponding event block is processed.

INSERT for Database Tables

Inserts entries from database tables.

Syntax

INSERT FROM .

INSERT FROM TABLE [ACCEPTING DUPLICATE KEYS].

Inserts one line from the work area or several lines from the internal table into the database table . The ACCEPTING DUPLICATE KEYS

addition prevents a runtime error from occurring if two entries have the same primary key. Instead, it merely discards the duplicate

INSERT for Field Groups

Defines the structure of field groups for extract datasets.

Syntax

INSERT … INTO .

Includes the fields in the field group , thus defining a line structure for an extract dataset.

INSERT for any Internal Table

Inserts lines from internal tables of any type.

Syntax

INSERT |LINES OF [FROM ] [TO ]

INTO TABLE

[ASSIGNING | REFERENCE INTO ].

Inserts a line or a set of lines from the internal table into the internal table . If is an index table, you can use the FROM and TO additions to

restrict the lines inserted. If you use ASSIGNING or INTO REFERENCE, field symbol refers to the inserted line or the relevant data

reference is stored in after the statement.

INSERT for Index Tables

Inserts entries in index tables.

Syntax

INSERT |LINES OF [FROM ] [TO ]

INTO [INDEX ]

[ASSIGNING | REFERENCE INTO ].

Inserts a line or a set of lines from the internal table into the internal table before the line with the index . If is an index table, you can use

the FROM and TO additions to restrict the lines inserted. If you omit the INDEX addition, you can only use the statement within a LOOP. A

new line containing values is inserted before the current line. If you use ASSIGNING or INTO REFERENCE, field symbol refers to the

inserted line or the relevant data reference is stored in after the statement.

INSERT for Programs

Inserts ABAP programs into the program library.

Syntax

INSERT REPORT FROM .

The lines of the internal table are added to the program library as the program .

INTERFACE

Declares a interface in ABAP Objects.

Syntax

INTERFACE [DEFERRED]

[LOAD].

Introduces an interface . The definition ends with ENDINTERFACE and contains the declaration of all the components of the interface. The

DEFERRED addition makes the interface known to the program before it is defined. The LOAD addition loads an interface explicitly from

the Class Library.

INTERFACES

Implementation or nesting of an interface in ABAP Objects.

Syntax

INTERFACES

[ABSTRACT|FINAL METHODS | ALL METHODS ABSTRACT|FINAL ]

[DATA VALUES = = ...]

.

Used in a class declaration: This statement adds the components of the interface to the existing class definition. Used in an interface

definition: Forms a compound interface. Use the additions to characterize methods in interfaces as abstract or final. Their attributes can be

filled with initial values.

L

LEAVE for Screens

Leaves a screen.

Syntax

LEAVE SCREEN.

Stops processing the current screen and calls the subsequent screen. The next screen can either be defined statically in the screen

attributes or set dynamically using the SET SCREEN statement.

Syntax

LEAVE TO SCREEN .

Stops processing the current screen and calls the dynamically-defined subsequent screen *.

LEAVE for Lists During Screen Processing

Switches between screen and list processing.

Syntax

LEAVE TO LIST-PROCESSING [AND RETURN TO SCREEN ].

Allows you to create and display a list while processing a series of screens. The addition allows you to specify the next screen (to which

you return after the list has been displayed). If you do not use the addition, screen processing resumes with the PBO of the current screen

Syntax

LEAVE LIST-PROCESSING.

Allows you to switch back explicitly from list processing to screen processing.

LEAVE for Programs

Leaves an ABAP program.

Syntax

LEAVE [PROGRAM].

Stops processing the current program and returns to the point from which it was called.

Syntax

LEAVE TO TRANSACTION [AND SKIP FIRST SCREEN].

This statement ends processing of the current program and starts a new transaction, . The addition allows you to skip the initial screen of

the transaction.

LOAD-OF-PROGRAM

Event keywords for defining event blocks for a program constructor.

Syntax

LOAD-OF-PROGRAM.

When an ABAP program is loaded in an internal session, the runtime environment triggers the LOAD-OF-PROGRAM event, and the

corresponding event block is executed.

LOCAL

Protects global data against changes.

Syntax

LOCAL .

Only occurs in subroutines. When the subroutine starts, the value of is stored temporarily, and restored to the variable at the end of the

subroutine.

LOOP Through Extracts

Introduces a loop through an extract dataset.

Syntax

LOOP.

Loops through an extract dataset. The loop ends with an ENDLOOP statement. When the LOOP statement is executed, the system stops

creating the extract dataset of the program, and starts a loop through the entries in the dataset. One record from the extract dataset is read

in each loop pass. The values of the extracted fields are placed in the corresponding output fields of the field group within the loop.

LOOP THROUGH internal tables

Starts a loop through an extract dataset.

Syntax

LOOP AT INTO WHERE .

LOOP AT ASSIGNING WHERE .

LOOP AT REFERENCE INTO WHERE .

LOOP AT TRANSPORTING NO FIELDS WHERE .

Loop through any Internal Table The loop ends with an ENDLOOP statement. If the logical expression is true, each loop pass either

assigns the current line content to the work area ; assigns the current line to a field symbol ; creates a reference to the current line by ; or

does not assign the line content at all. The first operand in each part of must be a component of the internal table. Pointed brackets are part

of the syntax for field symbol names.

With index tables, you can use the additions FROM and TO to restrict the lines that are read by specifying an index range.

LOOP Through Screen Fields

Starts a loop through the table SCREEN.

Syntax

LOOP AT SCREEN…

Similar to a loop through an internal table. The system table SCREEN contains the names and attributes of all of the fields on the current

screen.

M

MESSAGE

Displays a message.

Syntax

MESSAGE [WITH ... ] [RAISING ].

MESSAGE ID TYPE NUMBER .

MESSAGE ().

Displays the message of message class as message type . The message type specifies how the message is displayed, and how the

program reacts. The WITH addition allows you to fill placeholders in the message text. The RAISING addition in function modules and

methods allows you to terminate the procedure and trigger the exception .

MESSAGE TYPE

This variant display a string, , directly as a message of the type .

METHOD

Introduces the implementation of a method in a class.

Syntax

METHOD .

Only occurs in the implementation part of classes. Introduces a statement block that ends with ENDMETHOD. You do not have to specify

any interface parameters, since these are defined in the method declaration.

METHODS

Declares methods in classes and interfaces.

Syntax

METHODS [FOR EVENT OF ]

IMPORTING… [VALUE(][)] TYPE [OPTIONAL]…

EXPORTING… [VALUE(][)] TYPE [OPTIONAL]…

CHANGING … [VALUE(][)] TYPE [OPTIONAL]…

RETURNING VALUE()

EXCEPTIONS … …

[ABSTRACT]

[FINAL]

[REDEFINITION].

You declare a method in the definition part of a class or in the definition of an interface: The IMPORTING, EXPORTING, CHANGING,

RETURNING, and EXCEPTIONS additions define the parameter interface and exceptions of the method. The ABSTRACT addition defines

an abstract class, which cannot be implemented in the same class. The function of a non-abstract method must be implemented using

METHOD. The FINAL addition prevents you from redefining the method in subclasses. The REDEFINITION addition redefines a method of

a superclass. The FOR EVENT addition declares an event handler method for the event of a class or interface.

MODIFY for Database Tables

Inserts or changes lines in database tables.

Syntax

MODIFY FROM .

MODIFY FROM TABLE .

Works like INSERT for database tables, if there is not yet a line in the table with the same primary key. Works like UPDATE if a line already

exists with the same primary key.

MODIFY for any Internal Table

Changes the content of lines in internal tables of any type.

Syntax

MODIFY TABLE FROM [TRANSPORTING ...]

[ASSIGNING | REFERENCE INTO ].

Copies the work area into the line of the internal table with the same table key as . If you use ASSIGNING or INTO REFERENCE, field

symbol refers to the modified line or the relevant data reference is stored in after the statement. You can use the TRANSPORTING addition

to specify the exact components that you want to change.

MODIFY FROM TRANSPORTING … WHERE .

Copies the work area into the line of the internal table for which the logical expression is true. In each comparison of the logical expression,

the first operand must be a component of the line structure.

MODIFY for Index Tables

Changes the content of lines in index tables.

Syntax

MODIFY FROM [INDEX ] [TRANSPORTING ...]

[ASSIGNING | REFERENCE INTO ].

Copies the work area into the line of the internal table with the index . If you omit the INDEX addition, you can only use the statement within

a LOOP. In this case, you change the current loop line If you use ASSIGNING or INTO REFERENCE, field symbol refers to the modified

line or the relevant data reference is stored in after the statement.

MODIFY for Lists

Changes a list line.

Syntax

MODIFY LINE [INDEX ] [OF CURRENT PAGE|OF PAGE

]

|CURRENT LINE

LINE FORMAT …

FIELD VALUE [FROM ] [FROM ]…

FIELD FORMAT .

Changes either line on the current or specified list (or page), or the last line to be chosen. The exact nature of the change is specified in the

additions

MODIFY SCREEN

Changes the SCREEN table.

Syntax

MODIFY SCREEN…

Like changing an internal table. The system table SCREEN contains the names and attributes of all of the fields on the current screen.

MODULE

Introduces a dialog module.

Syntax

MODULE OUTPUT |[INPUT].

Introduces the dialog module . The OUTPUT and INPUT additions designate the module as a PBO or PAI module respectively. Each dialog

module ends with ENDMODULE.

MOVE

Assigns values.

Syntax

MOVE TO .

Assigns the contents of the data object to the variable , with automatic type conversion if necessary. Equivalent to = .

MOVE-CORRESPONDING

Assigns values between identically-named components of structures.

Syntax

MOVE-CORRESPONDING TO .

Moves the contents of the components of structure to the components of that have identical names.

MULTIPLY

Multiplies two single fields.

Syntax

MULTIPLY BY .

Multiplies the content of by , and stores the result in . This is equivalent to: m=m*n.

MULTIPLY-CORRESPONDING

Multiplies components of structures.

Syntax

MULTIPLY-CORRESPONDING BY .

All the identically-named subfields of the structures and are multiplied and the results are stored these subfields of .

N

NEW-LINE

Inserts a line break in a list.

Syntax

NEW-LINE [NO-SCROLLING|SCROLLING].

Positions the list display after the page header. The NO-SCROLLING addition prevents the new line from scrolling horizontally.

SCROLLING resets the NO-SCROLLING addition.

NEW-PAGE

Inserts a page break in a list.

Syntax

NEW-PAGE [NO-TITLE|WITH-TITLE]

[NO-HEADING|WITH-HEADING]

[LINE-COUNT]

[LINE-SIZE]

[PRINT ON|OFF].

Generates a new page and positions the list output after the page header. The additions control how the page header is displayed, the

length and width of the page, and the print output.

NODES

Declares an interface work area.

Syntax

NODES .

Declares a variable with the same data type and the same name as a data type from the ABAP Dictionary. Structures in main programs

and subroutines declared using NODES use a common data area. This statement is used in conjunction with logical databases.

O

ON CHANGE

Introduces a new branch.

Syntax

ON CHANGE OF [OR OR ...].

Opens an ON control structure, which ends with ENDON. The statement block is executed whenever the contents of the field or one of the

other fields has changed since the statement was last executed.

OPEN CURSOR

Opens a database cursor.

Syntax

OPEN CURSOR [WITH HOLD] FOR SELECT

FROM

[WHERE ]

[GROUP BY ]

[HAVING ]

[ORDER BY ].

Opens a cursor with type CURSOR for a SELECT statement. You can use all the clauses of the SELECT statement apart from the INTO

clause. The INTO clause is set in the FETCH statement. If you use the WITH HOLD addition, the cursor is not closed when a database

commit occurs.

OPEN DATASET

Opens a file.

Syntax

OPEN DATASET

[FOR INPUT|OUTPUT|APPENDING|UPDATE]

[IN BINARY MODE

|IN TEXT MODE [ENCODING (DEFAULT|UTF-8|NON-UNICODE)]

|IN LEGACY BINARY MODE [(BIG|LITTLE) ENDIAN] [CODE PAGE ]

|IN LEGACY TEXT MODE [(BIG|LITTLE) ENDIAN] [CODE PAGE ]]

[REPLACEMENT CHARACTER ]

[IGNORING CONVERSION ERRORS]

[AT POSITION ]

[TYPE ]

[MESSAGE ]

[FILTER ].

Opens a file on the application server. The additions after FOR specify how the file is read or written. The MODE additions specifies how

content is interpreted (as characters or in binary form). The ENCODING addition specifies the character representation in the file. The

LEGACY MODE allows you to read files that were written before Release 6.10. REPLACEMENT CHARACTERS and CONVERSION

ERRORS are used to handle errors during character set conversion. AT POSITION specifies the position in the file. MESSAGE specifies

where system messages are stored. FILTER lets you specify operating system commands.

OVERLAY

Overlays one string with another:

Syntax

OVERLAY WITH [ONLY ].

This statement overlays all positions in field containing letters which occur in with the contents of . remains unchanged. If you omit ONLY ,

all positions of containing spaces are overwritten.

P

PACK

Converts type C variables to type P.

Syntax

PACK TO .

Packs the string and places it in the field . This can be reversed with the UNPACK statement.

PARAMETERS

Declares parameters for a selection screen.

Syntax

PARAMETERS

[()] [TYPE |LIKE ] [DECIMALS ]

[DEFAULT ]

[MEMORY ID ]

[LOWER CASE]

[OBLIGATORY]

[VALUE CHECK]

[AS CHECKBOX]

[RADIOBUTTON GROUP ]

[NO-DISPLAY]

[MODIF ID ].

Declares a variable

, as in the DATA statement. For

, an input field appears on the corresponding selection screen. The additions allow you to define default values, accept lowercase input,

define the field as required, check values, define a checkbox or radio button, prevent the field from being displayed on the selection screen,

or modify the field

PERFORM

Calls a subroutine.

Syntax

PERFORM

| ( ) [IF FOUND]

|()[IN PROGRAM ()][IF FOUND]

[USING ... ... ]

[CHANGING... ... ]

[ON COMMIT].

Calls an internal or external subroutine or the subroutine whose name occurs in the field. The external program is or the name contained

in . The IF FOUND addition prevents a runtime error from occurring if the subroutine does not exist. The USING and CHANGING additions

fill the subroutine’s parameter interface. The ON COMMIT addition delays the execution of the subroutine until the next COMMIT WORK

statement.

POSITION

Absolute position of the display in a list.

Syntax

POSITION .

Positions the list display in the column .

PRINT-CONTROL for Print Format

Specifies the print format.

Syntax

PRINT-CONTROL

[LINE ] [POSITION ].

Sets the print format starting either at the current list position or at line and column .

PRINT-CONTROL for Index Lines

Creates index lines in the spool file.

Syntax

PRINT-CONTROL INDEX-LINE .

Writes the contents of field into an index line after finishing the current print line. The index line is not printed. During optical archiving, the

spool system divides the list into a data file and a description file containing the index lines.

PRIVATE

Defines the private section of a class.

Syntax

PRIVATE SECTION.

Introduces the declaration of all of the components of a class that are only visible in the class itself.

PROGRAM

Introduces a program.

Syntax

PROGRAM …

The first statement in some ABAP programs. Equivalent to: REPORT.

PROTECTED

Defines the protected section of a class.

Syntax

PROTECTED SECTION.

Introduces the declaration of all of the components of a class that are only visible in the class and its subclasses.

PROVIDE

Loops through internal tables at given intervals.

Syntax

PROVIDE … FROM

… FROM

… FROM

… BETWEEN AND .

The contents of the specified fields of the internal tables … are placed in their header lines. The processing block between PROVIDE and

ENDPROVIDE is then executed for each interval.

PUBLIC

Defines the public section of a class.

Syntax

PUBLIC SECTION.

Introduces the declaration of all of the components of a class that are visible in the class, its subclasses, and all users.

PUT

Triggers a GET event.

Syntax

PUT .

Only occurs in logical databases. Directs the program flow according to the structure of the logical database.

R

RAISE for Class-Based Exceptions

Raises an exception.

Syntax

RAISE EXCEPTION TYPE | .

Terminates processing and raises an exception of the exception class . If the reference variable points to an object of an exception class,

can be specified instead of TYPE.

RAISE for Exceptions of Function Modules and Methods

Raises exceptions.

Syntax

RAISE .

Only occurs in function modules and methods. Terminates processing and raises an exception defined in the interface.

RAISE for Events

Triggers events in ABAP Objects.

Syntax

RAISE EVENT .

Only occurs in methods. Triggers the event and calls all registered handler methods.

RANGES

Declares a RANGES table.

Syntax

RANGES FOR .

Declares a RANGES table for the field . A RANGES table has the same data type as a selection table, but is not linked to input fields on a

selection screen.

READ for Files

Reads a file.

Syntax

READ DATASET INTO

[MAXIMUM LENGTH ]

[ACTUAL LENGTH ].

Reads the contents of the file on the application server to the variable . The amount of data can be specified using MAXIMUM LENGTH.

The number of bytes transferred can be written to using ACTUAL LENGTH.

READ for any Internal Table

Reads a line of an internal table.

Syntax

READ TABLE FROM

|WITH TABLE KEY = … =

|WITH KEY =

|WITH KEY = … =

INTO [COMPARING ... |ALL FIELDS]

[TRANSPORTING ... |ALL FIELDS|NO FIELDS]

|ASSIGNING

|REFERENCE INTO .

This statement reads either the line of the internal table with the same key as specified in the work area , the line with the key specified in

the TABLE KEY addition, the line that corresponds fully to , or the one corresponding to the freely-defined key in the KEY addition. The

contents of the line are either written to the work area , or the line is assigned to the field symbol . If you assign the line to a work area, you

can compare field contents and specify the fields that you want to transport.

READ for Index Tables

Reads a line of an internal table.

Syntax

READ TABLE INDEX INTO …

| ASSIGNING

| REFERENCE INTO .

The line with index 7 is read. The result is specified as with any internal table.

READ for Lists

Reads the contents of a line from a list.

Syntax

READ LINE [INDEX ] [OF CURRENT PAGE|OF PAGE

]

|CURRENT LINE

[FIELD VALUE [INTO ]… [INTO ]].

Reads either the line on the current or specified list or page, or the last line to have been selected by the user. The addition specifies the

fields that you want to read, and the target fields into which they should be placed. The entire line is always placed in the system field SY-

LISEL, and the HIDE area is filled for the line.

READ for Programs

Reads ABAP programs into the program library.

Syntax

READ REPORT INTO .

Copies the lines of the program into the internal table .

RECEIVE

Receives results from an asynchronous function module call.

Syntax

RECEIVE RESULTS FROM FUNCTION [KEEPING TASK]

[IMPORTING ... fi = a i... ]

[TABLES ... fi = a i... ]

[EXCEPTIONS... ei = r i... ]

Occurs in special subroutines to receive IMPORTING and TABLES parameters from function modules called using the STARTING NEW

TASK addition

REFRESH

Initializes an internal table.

Syntax

REFRESH .

Resets the internal table to its initial value, that is, deletes all of its lines.

REFRESH CONTROL

Initializes a control.

Syntax

REFRESH CONTROL FROM SCREEN .

The control defined in the CONTROLS statement is reset with the initial values specified for screen .

REJECT

Leaves an GET processing block.

Syntax

REJECT [].

Terminates the processing of the current line of the node of the logical database. If you use the optional , the logical database reads the

next line of the node .

REPLACE by Pattern

Replaces strings in fields with other strings using a pattern.

Syntax

REPLACE [ FIRST OCCURENCE OF | ALL OCCURENCES OF ] IN [ SECTION OFFSET LENGTH OF ] WITH

[IGNORING CASE|RESPECTING CASE]

[IN BYTE MODE|IN CHARACTER MODE]

[REPLACEMENT COUNT ]

[REPLACEMENT OFFSET ]

[REPLACEMENT LENGTH ].

In the string , the search pattern is replaced by the content of . By default, the first occurrence of is replaced. ALL OCCURENCES specifies

that all occurrences be replaced. In the fields and , trailing spaces in C fields are ignored, but included in . The SECTION OFFSET

LENGTH OF addition tells the system to search and replace only from the position in the length . IGNORING CASE or RESPECTING

CASE (default) specifies whether the search is to be case-sensitive. In Unicode programs, you must specify whether the statement is a

character or byte operation, using the IN BYTE MODE or IN CHARACTER MODE (default) additions. The REPLACEMENT additions write

the number of replacements, the offset of the last replacement, and the length of the last replaced string to the fields , , and .

REPLACE by Position

Replaces strings in fields with other strings by position.

Syntax

REPLACE WITH INTO [LENGTH ].

[IN BYTE MODE|IN CHARACTER MODE].

ABAP searches the field for the first occurrence of the first characters in the pattern and replaces them with the string . In Unicode

programs, you must specify whether the statement is a character or byte operation, using the IN BYTE MODE or IN CHARACTER MODE

(default) additions.

REPORT

Introduces a program.

Syntax

REPORT [MESSAGE-ID ]

[NO STANDARD PAGE HEADING]

[LINE-SIZE ]

[LINE-COUNT ()]

[DEFINING DATABASE ].

The first statement in executable ABAP programs. can be any name you choose. The addition MESSAGE-ID specifies a message class to

be used in the program. The DEFINING DATABASE addition defines the program as the database program of the logical database . The

other additions are formatting specifications for the default list of the program.

RESERVE

Inserts a conditional page break in a list.

Syntax

RESERVE LINES.

Executes a page break on the current page if less than lines are free between the current line and the page footer.

RETURN

Leaves a processing block.

Syntax

RETURN.

Leaves the current processing block. In a reporting event: Jumps directly to the output list.

ROLLBACK

Undoes the changes in a SAP LUW.

Syntax

ROLLBACK WORK.

ROLLBACK WORK always undoes all changes back to the start of the database LUW. The update modules are not called, and the log

entry is deleted from table VBLOG.

S

SCROLL

Scrolls through lists

Syntax

SCROLL LIST FORWARD|BACKWARD [INDEX ].

SCROLL LIST TO FIRST PAGE|LAST PAGE|PAGE [INDEX ] [LINE ].

SCROLL LIST LEFT|RIGHT [BY PLACES] [INDEX ].

SCROLL LIST TO COLUMN [INDEX ].

Positions the current list or the list level in accordance with the additions specified. You can scroll by window, page, columns, or to the left-

or right-hand edge of the list.

SEARCH

Searches for strings.

Syntax

SEARCH | FOR [ABBREVIATED]

[STARTING AT ]

[ENDING AT ]

[AND MARK]

[IN BYTE MODE|IN CHARACTER MODE].

Searches the field or table for the string in the field . The result is stored in SY-FDPOS. The additions let you hide intermediate characters,

search from and to a particular position, and convert the found string into uppercase. In Unicode programs, you must specify whether the

statement is a character or byte operation, using the IN BYTE MODE or IN CHARACTER MODE (default) additions.

SELECT

Reads data from the database.

Syntax

SELECT

INTO

FROM

[WHERE ]

[GROUP BY ]

[HAVING ]

[ORDER BY ].

The SELECT statement consists of a series of clauses, each of which fulfils a certain task:

SELECT clause

Defines the structure of the selection.

Syntax

SELECT [SINGLE]|[DISTINCT]

* | [AS ]… ( [DISTINCT] ) [AS ]…

The selection can be one line, SINGLE, or several lines. You can eliminate duplicate lines using the DISTINCT addition. To select the entire

line, use *, otherwise, you can specify individual columns . For individual columns, you can use aggregate functions , and assign alternative

column names .

INTO clause

Defines the target area into which the selection from the SELECT clause is written.

Syntax

… INTO [CORRESPONDING FIELDS OF]

| INTO|APPENDING [CORRESPONDING FIELDS OF] TABLE

[PACKAGE SIZE ]

| INTO (, ,…)

The target area can be a flat work area , an internal table , or a list of fields . If you use the CORRESPONDING FIELDS addition, data is

only selected if there is an identically-named field in the target area. If you use APPENDING instead of INTO, the data is appended to an

internal table instead of overwriting the existing contents. PACKAGE SIZE allows you to overwrite or extend the internal table in a series of

packages.The data type of the target area must be appropriate for the selection in the SELECT clause.

FROM clause

The FROM clause determines the database tables from which the data specified in the SELECT clause is read.

Syntax

… FROM [ [INNER]|LEFT [OUTER] JOIN] [AS ]

[ON ]

[CLIENT SPECIFIED]

[BYPASSING BUFFER]

[UP TO ROWS]

You can read both single fields and groups of fields. You link several tables using inner and outer joins to link tables with conditions , where

is a single table or itself a join condition. The names of database tables may be specified statically or dynamically, and you can use alias

names. You can bypass automatic client handling with the CLIENT SPECIFIED addition, and SAP buffering with BYPASSING BUFFER.

You can also restrict the number of lines read from the table using the UP TO ROWS addition.

WHERE clause

Restricts the number of lines selected.

Syntax

… [FOR ALL ENTRIES IN ] WHERE

The condition may contain one or more comparisons, tests for belonging to intervals, value list checks, subqueries, selection table queries

or null value checks, all linked with AND, OR, and NOT. If you use the FOR ALL ENTRIES addition, the condition is checked for each line

of the internal table as long as contains a field of the internal table as an operand. For each line of the internal table, the system selects the

lines from the database table that satisfy the condition. The result set is the union of the individual selections resulting from each line.

GROUP BY clause

Groups lines in the selection.

Syntax

… GROUP BY

Groups lines with the same contents in the specified columns. Uses aggregate functions for all other columns in each group. All columns of

the SELECT clause that are not listed in the GROUP BY clause must be included in aggregate functions.

HAVING clause

Restricts the number of line groups selected.

Syntax

… HAVING

Like the WHERE clause, but can only be used in conjunction with a GROUP BY clause. The HAVING clause uses conditions to restrict the

number of groups selected.

ORDER BY clause

Sorts the lines of the selection.

Syntax

… ORDER BY PRIMARY KEY |… [ASCENDING|DESCENDING]…

Sorts the selection in ascending or descending order according to the primary key or the contents of the fields listed.

SELECT-OPTIONS

Declares selection criteria for a selection screen.

Syntax

SELECT-OPTIONS FOR

[DEFAULT [to ] [OPTION ] SIGN ]

[MEMORY ID ]

[LOWER CASE]

[OBLIGATORY]

[NO-DISPLAY]

[MODIF ID ]

[NO-EXTENSION]

[NO INTERVALS]

[NO DATABASE SELECTION].

Declares a selection table for the field . For , places input fields on the corresponding selection screen. The additions allow you to set a

default value, accept input in lowercase, define a required field, suppress or modify the display on the selection screen, restrict the selection

table to a line or a selection to a single field, or prevent input from being passed to a logical database.

SELECTION-SCREEN for Selection Screen Formatting

Formats selection screens

Syntax

SELECTION-SCREEN SKIP [].

SELECTION-SCREEN ULINE [[/] ] [MODIF ID ].

SELECTION-SCREEN COMMENT [/] [FOR FIELD ]

[MODIF ID ].

SELECTION-SCREEN BEGIN OF LINE.

…

SELECTION-SCREEN END OF LINE.

SELECTION-SCREEN BEGIN OF BLOCK

[WITH FRAME [TITLE ]]

[NO INTERVALS].

…

SELECTION-SCREEN END OF BLOCK .

SELECTION-SCREEN FUNCTION KEY .

SELECTION SCREEN PUSHBUTTON [/] USER-COMMAND [MODIF ID ].

Allows you to insert blank lines, lines and comments, group input fields together in lines and blocks, and create pushbuttons.

SELECTION-SCREEN for Selection Screen Definition

Defines selection screens.

Syntax

SELECTION-SCREEN BEGIN OF [TITLE ] [AS WINDOW].

…

SELECTION-SCREEN END OF .

Defines a selection screen with screen number . All PARAMETERS, SELECT-OPTIONS, and SELECTION-SCREEN statements that occur

between these two statements define the input fields and the formatting of this selection screen. The TITLE

SELECTION-SCREEN for Selection Screen Versions

Defines selection screen versions.

Syntax

SELECTION-SCREEN BEGIN OF VERSION

…

SELECTION-SCREEN EXCLUDE .

…

SELECTION-SCREEN BEGIN OF VERSION .

Only occurs in logical databases. Hides fields that otherwise appear on the standard selection screen.

SELECTION-SCREEN for Logical Databases

Provides special functions.

Syntax

SELECTION-SCREEN DYNAMIC SELECTIONS | FIELD SELECTION

FOR NODE|TABLE .

Only occurs in logical databases. Declares a node as accepting dynamic selections or field selections.

SET BIT

Sets individual bits.

Syntax

SET BIT OF [TO ].

This statement sets the bit at position of the hexadecimal field to 1 (or to the value of field ). The field must contain the value 0 or 1.

SET BLANK LINES

Allows blank lines in lists.

Syntax

SET BLANK LINES ON|OFF.

Prevents blank lines created in WRITE statements from being suppressed in list output.

SET COUNTRY

Sets output Formats

Syntax

SET COUNTRY .

Sets the output formats for numeric and date fields for the country with the ID .

SET CURSOR

Sets the cursor on the screen.

Syntax

SET CURSOR FIELD [OFFSET ]

[LINE ].

SET CURSOR LINE [OFFSET ].

SET CURSOR .

Sets the cursor either to a particular position in a field, line, or column of a line.

SET DATASET

Syntax

SET DATASET [POSITIONS | END-OF_FILE]

[ATTRIBUTE ].

Changes the attributes of a file opened using OPEN DATASET. The POSITIONS addition sets the current read/write position to the value in

the field or to the end of the file. The ATTRIBUTE addition passes the attributes to the file in a structure, , of the type DSET_ATTRIBUTES.

SET EXTENDED CHECK

Affects the extended program check.

Syntax

SET EXTENDED CHECK ON|OFF.

Switches the extended program check (SLIN) on or off, suppressing the corresponding messages.

SET HANDLER

Registers event handlers in ABAP Objects.

Syntax

SET HANDLER… … [FOR |FOR ALL INSTANCES].

If you do not use the FOR addition, the handler is set for all static events. Use the FOR addition to register handlers for instance events.

SET HOLD DATA

Sets a screen attribute.

Syntax

SET HOLD DATA ON|OFF.

Sets the screen attribute “Hold data” from the program.

SET LANGUAGE

Sets the display language.

Syntax

SET LANGUAGE .

All text symbols are refreshed with the contents of the text pool in language .

SET LEFT SCROLL BOUNDARY

Sets the left boundary for horizontal scrolling.

Syntax

SET LEFT SCROLL-BOUNDARY [COLUMN ].

Sets the current output position or the position as the left-hand edge of the scrollable area on the current list page.

SET LOCALE LANGUAGE

Sets the current text environment.

Syntax

SET LOCALE LANGUAGE [COUNTRY ] [MODIFIER ].

Sets the text environment for alphabetical sorting according to the language , country , and any further modifier .

SET MARGIN

Sets the margin of a print page.

SET MARGIN [].

Sends the current list page to the spool system with a margin of columns from the left-hand edge and rows from the top edge of the page.

SET PARAMETER

Sets an SPA/GPA parameters

Syntax

SET PARAMETER ID FIELD .

Writes the value of the field to the SPA/GPA parameter in the user-specific SAP memory.

SET PF-STATUS

Sets the GUI status

Syntax

SET PF-STATUS [EXCLUDING |]

[IMMEDIATELY] [OF PROGRAM ].

Sets the GUI status for the subsequent screens. The EXCLUDING addition allows you to deactivate functions dynamically. The

IMMEDIATELY addition sets the GUI status of the list currently displayed. The OF PROGRAM addition allows you to use a GUI status from

another program.

SET PROPERTY

Sets a property of an OLE2 Automation object.

Syntax

GET PROPERTY OF

= .

Sets the property

of an external OLE2 Automation object to .

SET RUN TIME ANALYZER

Controls runtime analysis.

Syntax

SET RUN TIME ANALYZER ON|OFF.

The runtime analysis only measures the runtime of the statements in the block between SET RUN TIME ANALYZER ON and OFF.

SET RUN TIME CLOCK

Controls runtime analysis.

Syntax

SET RUN TIME CLOCK RESOLUTION HIGH|LOW.

Sets the accuracy of the runtime to low accuracy with long measurement interval or high accuracy with shorter measurement interval.

SET SCREEN

Sets the next screen.

Syntax

SET SCREEN .

Temporarily overwrites the statically-defined next screen with . is processed after the current screen.

SET TITLEBAR

Sets the screen title.

Syntax

SET TITLEBAR [OF PROGRAM ] [WITH ... ].

Sets the title for the subsequent screens. The OF PROGRAM addition allows you to use a title from another program. The WITH addition

fills any placeholders in the title.

SET UPDATE TASK LOCAL

Switches on local update.

Syntax

SET UPDATE TASK LOCAL.

Updates are processed in the current work process.

SET USER-COMMAND

Triggers a list event.

Syntax

SET USER-COMMAND .

Triggers a list event with the function code and calls the corresponding event block.

SHIFT

Shifts strings.

Syntax

SHIFT [BY PLACES] [LEFT|RIGHT|CIRCULAR]

[IN BYTE MODE|IN CHARACTER MODE].

Shifts the field by one or places. The additions allow you to specify the direction, and how the empty spaces are dealt with. In Unicode

programs, you must specify whether the statement is a character or byte operation, using the IN BYTE MODE or IN CHARACTER MODE

(default) additions.

SKIP for Blank Lines

Generates blank lines in the display list.

Syntax

SKIP [].

The system writes blank lines into the current list, starting at the current line. If no value is specified for , one blank line is output.

SKIP for Positioning

Absolute position of the display in a list.

Syntax

SKIP TO LINE .

Positions the list display in the line .

SORT for Extracts

Sorts an extract dataset.

Syntax

SORT [ASCENDING|DESCENDING] [AS TEXT] [STABLE]

… BY [ASCENDING|DESCENDING] [AS TEXT]…

Ends the creation of the extract dataset of a program and, at the same time, sorts its records. Without the BY option, the system sorts the

dataset by the key specified in the HEADER field group. You can define a different sort key by using the BY addition. The other additions

specify whether you want to sort in ascending or descending order, and whether strings should be sorted alphabetically.

SORT for Internal Tables

Sorts internal tables.

Syntax

SORT [ASCENDING|DESCENDING] [AS TEXT] [STABLE]

… BY [ASCENDING|DESCENDING] [AS TEXT]…

Sorts the internal table . If you omit the BY addition, the table is sorted by its key. You can define a different sort key by using the BY

addition. The other additions specify whether you want to sort in ascending or descending order, and whether strings should be sorted

alphabetically.

SPLIT

Splits a string.

Syntax

SPLIT AT INTO … INTO TABLE

[IN BYTE MODE|IN CHARACTER MODE].

This statement searches the character field for delimiter strings and the parts before and after the delimiters are placed in the target fields

…> … , or into a new line of the internal table . In Unicode programs, you must specify whether the statement is a character or byte

operation, using the IN BYTE MODE or IN CHARACTER MODE (default) additions.

START-OF-SELECTION

Event keywords for defining event blocks for reporting events.

Syntax

START-OF-SELECTION.

After the selection screen has been processed, the runtime environment triggers the LOAD-OF-PROGRAM event, and the corresponding

event block is executed.

STATICS

Defines static variables.

Syntax

STATICS …

Like DATA. Retains the value of a local variable beyond the runtime of the procedure in which it occurs.

STOP

Leaves a reporting event.

Syntax

STOP.

Only occurs in event blocks for reporting events. Leaves the event block and goes to the END-OF-SELECTION block.

SUBMIT

Calls an executable program of type 1.

Syntax

SUBMIT [AND RETURN] [VIA SELECTION-SCREEN]

[USING SELECTION-SET ]

[WITH ]

[WITH FREE SELECTIONS ]

[WITH SELECTION-TABLE ]

[LINE-SIZE ]

[LINE-COUNT ].

Calls the program . If you omit the AND RETURN addition, the current program is terminated. Otherwise, the data from the current program

is retained, and processing returns to the calling program when has finished running. The other additions control the selection screen and

set attributes of the default list in the called program.

SUBTRACT for single fields

Subtracts two single fields.

Syntax

SUBTRACT FROM .

The contents of are subtracted from the contents of and the results are stored in . This is equivalent to: = – .

SUBTRACT-CORRESPONDING

Subtracts components of structures.

Syntax

SUBTRACT-CORRESPONDING FROM .

All the subfields of the structures and having the same name are subtracted and the results are stored in .

SUM

Calculates sums of groups.

Syntax

SUM.

Only occurs in loops through internal tables. Calculates the sums of the numeric fields in all lines of the current control level and writes the

results to the corresponding fields in the work area.

SUPPLY

Fills context instances with values.

Syntax

SUPPLY = … = TO CONTEXT .

Fills the key fields of the context instance with the values .

SUPPRESS DIALOG

Prevents the current screen from being displayed.

Syntax

SUPPRESS DIALOG.

Can only occur in a PBO dialog module. The screen is not displayed, but its flow logic is still processed.

T

TABLES

Declares an interface work area.

Syntax

TABLES .

Declares a structure with the same data type and the same name as a database table, a view, or a structure from the ABAP Dictionary.

Structures in main programs and subroutines declared using TABLES use a common data area.

TOP-OF-PAGE

Event keywords for defining event blocks for list events.

Syntax

TOP-OF-PAGE [DURING LINE-SELECTION].

Whenever a new page begins while a standard list is being created, the runtime environment triggers the TOP-OF-PAGE event and the

corresponding event block is executed. The addition DURING LINE-SELECTION has the same function, but for detail lists.

TRANSFER

Writes to a file.

Syntax

TRANSFER TO [LENGTH ].

Writes the field to the file on the application server. You can specify the length of the data you want to transfer using the LENGTH addition.

TRANSLATE

Converts characters to strings.

Syntax

TRANSLATE TO UPPER|LOWER CASE

|USING .

The characters of the string are converted into upper- or lowercase, or according to a substitution rule specified in .

TRY

Introduces a TRY block.

Syntax

TRY.

Class-based exceptions can be handled using the CATCH statement, within the block ended with ENDTRY.

TYPE-POOL

Introduces a type group.

Syntax

TYPE-POOL .

The first statement in a type group. This statement is not entered in the ABAP Editor, but is automatically generated by the Dictionary in the

ABAP Workbench. A type group is an ABAP program that contains type definitions and constant declarations that can be used in several

programs.

TYPE-POOLS

Declares the types and constants of a type group to a program.

Syntax

TYPE-POOLS .

This statement allows you to use all the data types and constants defined in the type group in your program.

TYPES for Single Field Types

Defines a single field type.

Syntax

TYPES [()] [TYPE |LIKE ] [DECIMALS ].

Defines the internal data type in the program with length , reference to the ABAP Dictionary type or a data object , and, where appropriate,

with decimal places.

Syntax

TYPES TYPE REF TO |.

Defines the internal data type in the program with reference to the class or the interface .

Syntax

TYPES TYPE REF TO DATA|.

Defines the internal data type as a data reference to a data object.

TYPES for Complex Types

Defines complex types.

Syntax

TYPES: BEGIN OF ,

…

…,

…

END OF .

Combines the data types to form the structure . You can address the individual components of a structure in a program using a hyphen

between the structure name and the component name as follows: -.

Syntax

TYPES TYPE|LIKE OF [WITH ].

Defines the local data type in the program as an internal table with the access type , the line type , and the key .

Syntax

TYPES TYPE|LIKE RANGE OF |.

Defines the internal data type as a RANGES table. A RANGES table has the same data type as a selection table, but is not linked to input

fields on a selection screen.

U

ULINE

Places horizontal lines in the display list.

Syntax

ULINE [AT [/][ ][()]].

Without additions, creates a new line on the current list and fills it with a horizontal line. The additions allow you to insert a line break and

specify the starting position and length of the line.

UNPACK

Converts type P variables to type C.

Syntax

UNPACK TO .

Unpacks the packed field and places it in the string with leading zeros. This can be reversed with the PACK statement.

UPDATE

Changes entries in database tables.

Syntax

UPDATE SET =

| = +

| = – [WHERE ].

The value in the column is set to the value , increases it by , or decreases it by for all lines selected. The WHERE clause specifies the lines

that are changed. If you omit the WHERE clause, all lines are changed.

Syntax

UPDATE FROM .

UPDATE FROM TABLE .

This deletes the line that has the same primary key as the work area , or deletes all the lines in the database that have the same primary

key as a line in the internal table . The work area or the lines of the internal table must have at least the same length and alignment as the

lines of the database table.

W

WHEN

Introduces a statement block in a CASE control structure.

Syntax

WHEN [OR OR...] | OTHERS.

The statement block following a WHEN statement is executed if the contents of the field in the CASE statement are the same as those of

one of the fields . Afterwards, the program carries on processing after the ENDCASE statement. The statement block after WHEN

OTHERS statement is executed if the contents of does not equal any of the contents.

WHILE

Introduces a loop.

Syntax

WHILE [VARY FROM NEXT ].

Introduces a statement block that ends with ENDWHILE. The statement block between WHILE and ENDWHILE is repeated as long as the

logical expression is true, or until a termination statement such as EXIT or CHECK occurs. The VARY addition allows you to process fields

the same distance apart in memory.

WINDOW

Displays a list as a modal dialog box.

Syntax

WINDOW STARTING AT [ENDING AT ].

Only occurs in list processing. The current detail list is displayed as a modal dialog box. The top left-hand corner of the window is

positioned at column and line . The bottom right-hand corner is positioned at column and line (if specified).

WRITE

Displays lists.

Syntax

WRITE [AT [/][ ][()]] [AS CHECKBOX|SYMBOL|ICON|LINE]

[QUICKINFO ].

[

]

The contents of the field are formatted according to their data type and displayed in the current list. . The additions before the field allow

you to specify a line break, the starting position, and the length of the field. The additions after the field allow you to display checkboxes,

symbols, icons, and lines. The

addition can contain various other formatting options. The QUICKINFO addition allows you to assign a tool tip to the field.

WRITE TO

Assigns string values.

Syntax

WRITE TO [

].

Converts the contents of a data object to type C, and assigns the resulting string to the variable . You can use the same formatting options

available in the WRITE statement