community planning & development addition and garage ......2020/10/20 · 201 w. colfax ave.,...

201 W. Colfax Ave., Dept. 205

Denver, CO 80202

720.865.2709 or [email protected]

Design Review Addition and Garage ChecklistDesign review is a collaborative process used to examine projects in designated historic areas or properties for architectural design and compatibility with the nearby historic built environment. Applications submitted for design review must be accompanied with specific information which adequately de-scribes or studies the proposal. To comply with the required submittal standards of Denver Landmark Preservation, submitted documentation shall clearly illustrate the existing conditions as well as any proposed alteration(s). For second-story additions use the Infill & 2nd Floor Additions checklist.

Submit this form, completed, with the required submittal documentation

Project Address:

The following is REQUIRED:q 1. Complete Application for Design Review

q 2. Site Plan

q 3. Elevation drawings of each proposed façade- Include height of nearby adjacent structures

q 4. Details of construction a. Window details depicting head, jamb, and sill details in section with profile measurementsb. Sample board(s) or cut-sheet(s) with building materials color, texture, and other details shown

q 5. Color photos of existing conditions

Please note: If the proposal includes demolition of an existing structure a separate demolition application will need to be approved.

Additional documentation may be required to adequately depict the project and its impact on a historic property or a historic district.

Review is based on a comparison of the proposal and the Secretary of the Interior’s Standards, Design Guidelines for Landmark Structures and Districts, Landmark Preservation Ordinance; Chapter 30 Revised Municipal Code and other applicable adopted guidelines. Landmark staff is not responsible for building or zoning review. Please submit plans to those agencies for comment.

Community Planning & Development

Addition and Garage Checklist

LEGAL DISCLAIMER: This Advisory should not be used as a substitute for codes and regulations. The applicant is responsible for compliance with all code, guideline

and/or rule requirements, whether or not described in this Advisory.

Landmark Preservation 5/19/15

q 6. Other: ________________________________________________________________________

LANDMARK CERTIFICATE OF APPROPRIATENESS – ApplicationDesign review for this project will not begin until a complete application and required submittal materials are received. Landmark Preservation reserves the right to delay consideration and/or action on a submittal in the event that information is missing and/or changed at the time of the scheduled de-sign review or public hearing. Please use the appropriate project checklist for guidance. A pre-application review is required first for certain projects.

SUBJECT PROPERTY INFORMATION

Property Address

Property Type/Use q 1 or 2 Unit Building (Single Family Home, Duplex) Historic District

q Commercial

q Multi-Unit Residential q Other

Applicant Name: Street:

Company: City:

Phone: Zip:

Email

ITEMIZED LISTING OF PROPOSED WORK ITEMS - only listed items will be reviewed:

[Example: Replace roof shingles, Construct 2-car detached garage, etc.] Only work listed below will be considered.

q

q

q

Materials of work:

(Example: Type of window materials, siding, roofing, etc.)

q

q

q

Amount of demolition of original features/materials

q square feet

APPLICATIONS ARE NOT CONSIDERED COMPLETE UNTIL ALL INFORMATION REQUIRED ON THE APPROPRIATE SUBMITTAL CHECKLIST IS SUBMITTEDI attest that no additional exterior work or window work will occur under this application (sign, and print application).

Design Review Deadline: The filing deadline is 4 weeks prior to scheduled Landmark Preservation Commission (LPC) meetings, and 23 days (3 weeks and 2 days) prior to the first Thursday of each month for the Lower Downtown Design Review Board (LDDRB). A complete application, including full supporting documentation, is due in the Landmark Preservation office by 12:00pm (noon) on the filing deadline. Landmark staff will determine whether LPC or LDDRB review is required based on adopted design guidelines. Staff will contact the applicant regarding staff comments, meeting dates (if applicable) and any additional materials that may be required.To submit electronically: Email this form and supporting materials to [email protected]. Electronic submission should include two attachments: one pdf with the completed form (“yourname-app.pdf”) and one pdf that combines all supporting materials (“yourname-app-materials.pdf”). File size should not exceed 25MB combined. Contact us if you are having trouble with your electronic submission.To submit in person: Submit this form and supporting materials to the Records Counter weekdays between 7:30am and 4:30pm on the 2nd floor of the Webb Munici-pal Building, 201 W. Colfax Ave.

All submittals become the property of the City & County of Denver. Submittals are open records.

Submittals will be posted online or made available to any party that requests a copy. 201 W. Colfax Ave., Dept. 205Denver, CO 80202

720.865.2709 or [email protected]

Landmark Preservation

Community Planning & Development

Application

3/15/16

q

q

q

350 Bannock Street – West Street View

350 Bannock Street – East Rear View

350 Bannock Street – South Side View

350 Bannock Street – South Side View

350 BANNOCK STREET – Streetscape Study

158 W. 4th Ave. 360 Bannock St. (Carriage House) 352 Bannock St.

32’‐0” +/‐ 19’‐0” +/‐ 21’‐6” +/‐

Minimum Block Height: 15’‐0”

Maximum Block Height: 32’‐0”

Proposed Project Height: 23’‐3.5”


350 Bannock St. 338 / 336 Bannock St. 328 Bannock St. 324 Bannock St.

23’‐3.5” +/‐ 15’‐0” +/‐ 20‐0” +/‐ 21’‐0” +/‐


314 Bannock St. 310 Bannock St. 306 Bannock St. 302 Bannock St.

28’-6” +/- 28’-6” +/- 29’-0” +/- 31’-0” +/-

SILL

Head, Sill Details

Drawn to Full Scale

Printed to 3" = 1' Scale

STACK DETAIL

3 9/16"

[91]

6 1

/1

6"

[1

54

]

JAMB

4 9

/1

6"

[1

16

]

1 3

/4

"

[4

5]

(T

YP

.)

4 1/8"

[105]

2 13/16"

[72]

STILE (TYP.)

1 1/16"

[27]

1 3/4"

[44]

1/2"

[13]

w/ Door Transom & Patio Door Drip Cap Nail Fin

SIERRAPACIFICWINDOWS

Aluminum Wood Sliding Patio Doorsw/ Door Transom Stack

3 5/8"

[91]

4 9

/1

6"

[1

16

]

JA

MB

D

EP

TH

5 1

1/1

6"

[1

44

]

1 1/4"

[33]

FRAME

7 3

/4

"

[1

97

]

3 3

/4

"

[9

6]

1 1

/4

"

[3

3]

3 5

/8

"

[9

2]

2 7

/8

"

[7

2]

HEAD

4 9/16"

[116]

6 1/8"

[156]

SILL 2 3/4"

[70]

HEAD

SILL

SILL

4 9/16"

[116]

6 1/8"

[156]

2 1/2"

[64]

3 1/16"

[78]

1 11/16"

[43]

Head, Sill Details

Drawn to Full Scale


1/2

[12]

STACK DETAIL

Aluminum Wood Sliding Patio Doorsw/ Direct Set Window Stack


French Sliding Patio Doorw/ Direct Set Stack & patio Door Drip cap Nail Fin

HEAD

SILL

SILL

Head, Sill & Jamb Details

Drawn to Full Scale


4 13/16"

[122]

1 11/16"

[43]

6 9/16"

[166]

JA

MB

D

EP

TH

8 1/16"

[204]

4 15/16"

[125]

JAMB

JAMB

6 9/16"

[166]

8 1/16"

[204]

2 3/8"

[60]

2 3/8"

[60]

7/16"

[11]

STACK DETAIL

Aluminum Wood Sliding Patio Doorsw/ Fixed Casement Window Stack

1 3/4"

[44]

6 1/8"

[156]

JA

MB

D

EP

TH

7 11/16"

[195]

1 9/16"

[40]


6 9/16" Jamb

Stack Intersection

Scale 3X

1/2"

1/4"

1/4" AluminumExterior Mull Connector

See Detail this Page

Stack Intersection

1/4" x 5" ALUMINUM

MULL PLATE BAR

APPLIED BY FACTORY

Standard Aluminum ExteriorTight Mull Connector

5/16"

[7mm]

5/16"

[7mm]

Scale 2X

Head, Sill Details

Drawn to Full Scale


Aluminum Wood Sliding Patio Doorsw/ Fixed Casement Window Stack


Fixed Casements with Patio Door Drip Cap Nail Fin

Tight Stack 1/4" Mull Plate Stack

1/4" Mull Plate Cover Detail

HEAD

SILL

SILL

7 9

/1

6"

[1

92

]

Head, Sill Details


2"

[5

1]

4 1

/2

"

[1

15

]

4 9/16"

[116]

6 1/16"

[153]

STACK DETAIL

Aluminum Wood Sliding Patio Doorsw/ Direct Set Window w/ 2" Spread Stack


HEAD

SILL

SILL

Head, Sill Details

Drawn to Full Scale


2"

[51]

4 9/16"

[116]

6 1/16"

[153]

STACK DETAIL

Aluminum Wood Sliding Patio Doorsw/ Fixed Casement Window w/ 2" Spread Stack


Architect Series® Designer Series® ProLine 450 Series

W-HG-91

DOUBLE-HUNG

Pella 2016 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com

UNIT SECTIONS

Aluminum-Clad Exterior

[36]

1 7/

16"

[29]1 3/16"

[31]1 1/4"

FRAME WIDTH

[41]

1 5/

8"[4

2]1

5/8"

[26]1"

[63]2 1/2"

[41]1 5/8"

FRAME WIDTH

FRA

ME

HE

IGH

T

[127

]5"

Installation FinOptional Fold-out

[26]1"

[19]3/4"

[63]2 1/2"

[29]1 3/16"

VENT

[19]3/4"

[31]1 1/4"

[41]

1 5/

8"[3

2]1

1/4"

[19]

3/4"

[39]

1 9/

16"

[94]

3 11

/16"

[33]

1 5/

16"[7

6]3"[3

6]1

7/16

"[4

9]1

15/1

6"

[33]1 5/16"

[29]

1 1/

8"

[94]3 11/16"

CR

VS

VH

UJ

LJ

CHECK RAILCR

VS VENT SILL

VH VENT HEAD

LOWER JAMBSLJ

UPPER JAMBSUJ

Scale 3" = 1' 0"

All dimensions are approximate.

Architect Series® Designer Series® ProLine 450 Series

W-HG-92

DOUBLE-HUNG

Pella 2016 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com

UNIT SECTIONS

Aluminum-Clad Exterior

FRAME WIDTH

FRA

ME

HE

IGH

T

[44]

1 11

/16"

[44]

1 11

/16"

[44]1 11/16"

[44]1 11/16"

FRAME WIDTH

FRA

ME

HE

IGH

T

[37]

1 7/

16"

[37]1 7/16"

[62]2 7/16"

[19]3/4"

TRANSOMS

[19]

3/4"

[33]

1 5/

16"

[94]

3 11

/16"

[19]3/4"


[19]

3/4"

[127]5"


[35]

1 3/

8"

[19]3/4"

[37]1 7/16"

[62]2 7/16"

[94]

3 11

/16"

[33]

1 5/

16"

FIXED

[37]

1 7/

16"

[62]

2 7/

16"

[62]

2 7/

16"

[19]

3/4"

[19]3/4"

VENT / VENTVERTICAL JOINING MULLION

TRANSOM / VENTHORIZONTAL JOINING MULLION

VENT / FIXEDVERTICAL JOINING MULLION

TJ

FJ

TS

FS

TH

FH

TRANSOM JAMBTJ

FJ FIXED JAMB

TRANSOM SILLTS

FS FIXED SILL

TRANSOM HEADTH

FH FIXED HEAD

Scale 3" = 1' 0"

All dimensions are approximate.

See www.PellaADM.com for mullion limitations and reinforcing requirements.

TYPICAL JOINING MULLIONS

community planning & development addition and garage ......2020/10/20 · 201 w. colfax ave.,...

Documents