chemistry- fundamentals
DESCRIPTION
fundamentals of chm 211TRANSCRIPT
1
Chapter 1: Fundamentals
Textbook chapter 3
2
•Introduction to matter•Properties of matter
•Physical and chemical properties•Extensive and intensive properties•Temperature and density
•Composition of the atom•Atomic model•Atomic mass•Isotopes
•The periodic table and periodicity of elements’ properties•Naming molecular and ionic substances•The mole and molar mass•Percent composition
Outline
3
Introduction to Matter• Physical material of the universe
• Anything that occupies space and has mass• Exists in three physical states (solid, liquid, gas)
• Matter is made up of atoms
Atom: Basic unit of any chemical element
Element:• substance made up of atoms of the same kind (same atomic number)• Represented by symbols of 1 or 2 letters (Co, Cu, H, O, …)• To date: 118 elements (periodic table)•Allotropes are two or more distinct forms of an element (O, O2, O3)
Sodium Metal
Chlorine Gas
4
Introduction to Matter•Compound: substance made up of atoms of 2 or more elements chemically united (H2O, CO2, NaCl, …)
• Substance: a form of matter (element or compound) having a fixed composition and distinct identity (water, iron, glucose, …)
• Mixture:• Combination of 2 or more substances (tea, salted water, vinegar, mixture of sand + iron filling, air, …)•Homogenous mixture (or solution): composition is uniform throughout the sample (salted water, tea …)•Heterogeneous mixture: composition is not uniform throughout the sample (sand + iron filling, water + sand, …)
5
ChemistryStudy of elements composing matter and the changes they
undergo(Composition, Characteristics, Reactions)
Sodium Metal Chlorine Gas Sodium Reacting with
Chlorine
Crystals ofSodium Chloride
6
Chemists Interact with Others
7
Physical and Chemical Properties of matter
• Physical property:•Can be measured without changing the identity
color, melting point, boiling point, optical density….
• Chemical property (reactivity): •Describes the way a substance may change into another
CH4 + 2O2 → CO2 + 2H2O
8
Extensive and intensive properties
• Extensive property:Is additive depends on the amount of matter
mass, volume, length, …
• Intensive property:
Not additive does not depend on the amount of matter
density, concentration, pressure, viscosity, melting point, …
9
TemperatureA measure of the motion of particles in a system
Three systems for measuring the temperature:
• The Celsius scale (oC):
•under 1 atm: zero is the freezing point and 100 is the boiling point of water
•The Kelvin scale (K):
•Zero is the lowest temperature that can be attained theoretically = - 273.15oC Tk = TC + 273.15
Celsius and Kelvin scales have the same degree size but differ in the zero point.
• Remark:The Fahreinheit scale: under 1 atm:32 is freezing point of water; 212: boiling point of water (TF = (TC x 9/5) + 32)
Used in engineering sciencesDiffers from the Celsius and Kelvin scale in the zero point and in the degree size
10
Density
The mass of a substance per unit of volume of the substance: d = m/V
Unit: g/cm3 or (g/L for gases)
Remark: The mass of an object is measured by comparing it to a standard mass of 1 kg, which is the basic SI unit for mass.1 kg is the mass of I liter of water at 4oC.The weight is a measure of the gravitational force (pull) on a given mass by the gravity.
11
Atoms
“Atomos” = Indivisible Definition: the smallest particle of an element that retains the properties of that element
Modern theory assumptions of the atom (John Dalton, in 1803)1. Matter is made up of atoms that are indivisible and indestructible2. All atoms of a given element are identical3. Atoms of different elements combine in simple whole numbers
to form compounds4. Atoms of different elements have different weights and different
chemical properties5. Atoms cannot be created nor destroyed. When a compound
decomposes, the atoms are recovered unchanged
12
Composition of the atom
An atom is composed of a nucleus (protons + neutrons) surrounded by an electronic cloud
Representation of atoms:A ------> mass number (nb of p+ + nb of no)
XZ ------> atomic number (nb of p+)
13
Alpha-Particle Bombardment
14
IsotopesIsotopes: atoms of a given element having the same Z but different A
Differ in the number of neutrons
e.g.: C-12 and C-13 ; H-1, H-2 and H-3
15
Atomic Mass
Based on the mass of carbon: carbon-12 (the most common isotope of carbon)
C-12 is assigned a mass of exactly 12 atomic mass units (amu)
Masses of other atoms are given relative to C-12 Relative Atomic masses
Relative atomic masses are easily calculated by mass spectrometry.
16
Mass Spectrometry
Finding the mass of an element:
From mass spectrometery: mass of 13C / mass of 12C = 1.0836129
So the mass of a 13C atom is: (1.0836129) (12 amu) = 13.003355 amu
17
Average Atomic Mass
Elements occur in nature as mixtures of isotopes
Atomic mass is based on the relative abundance of isotopes
E.g.: carbon in nature:98.89% 12C, 1.11% 13C and <0.01% 14C (negligable)
Average atomic mass of natural carbon =(98.89 /100x 12 amu) + (1.11/100 x 13.003 amu) =
12.01 amu
The average atomic mass is often called the atomic weight
18
Isotopic Composition of Ne
The mass spectrum of neon
20Ne = 0.907
22Ne = 0.09
21Ne = 0.003
19
Exercise
Calculate the average atomic weight of Boron (B) from the following data:
Isotope Isotopic mass (amu) Fractional abundance10B 10.013 0.197811B 11.009 0.8022
10B = 10.013 x 0.1978 = 1.9806
11B = 11.009 x 0.8022 = 8.8314
10.812 amu
20
Exercise
21
The Periodic Table
Matter elements were classified according to their chemical behavior
This effort resulted in the development of the Periodic Table (1869)
Where,
Elements with similar properties fall within the same column called group or family
The horizontal rows within the periodic table are called period
22
Z increases
Z increases
23
Periodicity of Elements Properties
Within a group
Elements show similar chemical and physical properties
Example:Li, Na, and K are all soft, very reactive metals He, Ne, and Ar are very non-reactive gasses
ANDEach of the soft reactive metals comes immediately after one of the
nonreactive gases
24
Major Groups of the Periodic Table
Group Name Elements Properties
1A Alkali metals (wood ashes) Li, Na, K, Rb, Cs, Fr Monovalent cations
2A Alkaline earth metals Be, Mg, Ca, Sr, Ba, Ra Divalent cations
6A Chalcogens ("chalk formers") O, S, Se, Te, Po Divalent anions
7A Halogens ("salt formers") F, Cl, Br, I, At Monovalent anions
8A Noble gases (rare gases) He, Ne, Ar, Kr, Xe, Rn Inert
25
The Three Categories of the Periodic Table
Metals (everything on the left of the Al - Po diagonal):Good conductor of electricity and heat
Ductile and malleableLustrous
Solid at room temperature
Non-metals (to the right of the Al – Po diagonal):Poor conductor of electricity and heat
Not ductile nor malleableNon-lustrous
Metalloides (elements found along the Al – Po diagonal:(Al, Si, Ge, As, Sb, Te, Po, At):
Have properties of both metals and nonmetals
26
Molecules (Molecular Substances)
• Neutral aggregates of at least two atoms• Can be diatomic (H2, N2, O2, Cl2, Br2, I2, CO, HCl…)
OrPolyatomic (H2O, CH4, N2O4, C6H12O6).
• Molecular formula shows the exact number of atoms of each element in the molecule
• Empirical formula the simplest whole number ratio of atoms Examples:Substance Molecular formula Empirical formulaWater H2O H2O
Hexane C6H14 C3H7
Glucose C6H12O6 CH2O
Ammonia NH3 NH3
• Molecules are usually composed of nonmetallic elements
27
Naming Molecular Formula
• First word: name of the first element with a Greek prefix to denote the number of atoms
• Second word: Name of the second element with a Greek prefix for the number of atom and the suffix -ide attached • The prefixes are: di: 2 - tri: 3 - tetra: 4 - penta: 5 - hexa: 6 - hepta: 7 - octa: 8 – nona: 9 - deca 10 Examples:PCl5 : phosphorus pentachloride ; N2O4: dinitrogen tetroxide ; Cl2O7: dichlorine heptoxide; N2H4: dinitrogen tetrahydride
Common exceptions: CH4: methane; NH3: ammonia; H2O: water ; H2S: hydrogen sulfide
Others : B2H6: diborane ; SiH4: silane
28
Ions
Atoms or groups of atoms that have a positive or negative charge
Examples:Monoatomic ions: Cl-, Na+, Mg2+…Polyatomic ions : OH-, SO4
2-, NH4+
Positively charged cationsNegatively charged anions
With very few exceptions:
metallic elements cationsNonmetallic elements anions
29
Sodium Atom and Ion
30
Chlorine Atom and Ion
31
Naming Monoatomic Ions
Monoatomic cations: • Elements of groups 1A and 2A One ionic form (Type I): The name of the ion is the same as the name of the metal• E.g.: Na+ is sodium ion
• Transition Metals More than one ionic form (Type II) use Roman numeral.• Fe2+ is iron(II) or Ferrous ion• Fe3+ is iron(III) or Ferric ion
Monoatomic anions:• Add the suffix “ide” to the stem•E.g.: N3-: nitride ; O2-; oxide ; Cl-: chloride
32
33
34
Naming Polyatomic Ions
Ions of nonmetals and oxygen:
1- If a nonmetal forms two possible anions with oxygen, the one with the largest number of oxygen has the suffix -ate attached to the root of the nonmetal. The one with the fewer number of oxygen atoms has the suffix -ite
SO42- is the sulfate ion SO3
2- is the sulfite ion
PO43- is the phosphate ion PO3
3- is the phosphite ion
2- If the nonmetal forms more than two, the prefix per- is attached to the ion with the most oxygens, the prefix hypo- to the one with the fewest
ClO4- is the perchlorate ion
ClO3- is the chlorate ion
ClO2- is the chlorite ion
ClO- is the hypochlorite ion
35
Other Common Polyatomic Ions
OH-: hydroxide CN-; cyanide
SCN-: thiocyanate C2H3O2
-: acetate
CrO42-: chromate
Cr2O72-: dichromate
MnO4-: permanganate
NH4+ : Ammonium
Example: What are the names of the NO3- and NO2
- ions?
Solution: Here we have two ions that have a nonmetal (N) and oxygen. We use the root of the nonmetal, nitrogen to get nitr-, then attach a -ate to the one with
the most oxygens and a -ite to the one with the fewest NO3
-: nitrate
NO2-: nitrite
36
Ionic Compounds
• Made of cations and anions attracted to each other
• Ions in pure ionic compounds have an organized three dimensional arrangement (a crystal) described using empirical formulas of formula unit
•The charges on the ions must balance•CaCl2: 1 calcium ion with +2 charge and 2 chloride ions with a -1 charge
•Al2(SO4)3: 2 aluminum ions with a +3 charge and 3 sulfate ions with -2 charge
37
Naming Ionic Compounds
E.g.:NaCl : Sodium ChlorideNaNO2: Sodium Nitrite
E.g.:CuO: Copper (II) oxide or…Cu2O: Copper (I) oxide or…
38
Naming Acids
• Acids are molecules that contain dissociable hydrogen atom (e.g., HCl, HBr, and HCN)• Acids are named by adding the prefix hydro- to the name of the compound and then replacing the suffix -ide with –ic
• Hydrogen chloride (HCl) Hydrochloric acid• Hydrogen bromide (HBr) Hydrobromic acid• Hydrogen cyanide (HCN) Hydrocyanic acid
• Many of the oxygen-rich polyatomic negative ions form acids that are named by replacing the suffix -ate with -ic and the suffix -ite with -ous
39
Acids containing ions ending with -ide often become hydro -ic acid F- (fluoride) => HF hydrofluoric acid S2- (sulfide) => H2S hydrosulfuric acid
Acids containing ions ending with -ate usually become -ic acid CH3CO2
- (acetate) => CH3CO2H acetic acid
CO32- (carbonate) => H2CO3 carbonic acid
BO33- (borate) => H3BO3 boric acid
NO3- (nitrate) => HNO3 nitric acid
SO42- (sulfate) => H2SO4 sulfuric acid
ClO4- (perchlorate) => HClO4 perchloric acid
PO43- (phosphate) => H3PO4 phosphoric acid
MnO4- (permanganate) => HMnO4 permanganic acid
CrO42- (chromate)=> H2CrO4 chromic acid
ClO3- (chlorate) => HClO3 chloric acid
Acids containing ions ending with -ite usually become -ous acid ClO2
- (chlorite) => HClO2 chlorous acid
NO2- (nitrite) => HNO2 nitrous acid
SO32- (sulfite) => H2SO3 sulfurous acid
40
The Mole
Relates the atomic mass to a unit of gram for lab purposes
The number of carbon atoms in exactly 12 grams of pure 12C
Modern techniques have been used to define this number as 6.02214199 x 1023
This is called Avogadro’s number (NA) 1 gram = 6.022 1023 amu
Molar mass = Mass (in grams) of 1 mole = atomic mass (amu) x 6.022 1023 x 1g/ 6.022 1023 amu
Numerically equivalent to atomic mass
41
Molar masses of some substances
Element Number of Atoms Mass of Sample (g)
AluminiumGoldIronSulfurBoronXenon
6.02214199 x 1023
6.02214199 x 1023
6.02214199 x 1023
6.02214199 x 1023
6.02214199 x 1023
6.02214199 x 1023
26.98196.9755.8532.0710.81131.30
Just like 1 dozen eggs is 12 eggs
1 mole of Copper is 63.5 grams and 6.022 x 1023 atoms
Comparison of 1 mole samples of various elements
42
Molar Mass of Compounds
A substance’s molar mass (or molecular weight) is the mass in grams of one mole of the compound
Molar mass of CO2? CO2 = 44.01 grams per mole
1 C = 12.012 O: 2 x 16.00 = 32.00
Molar mass of Al2(SO4)3?
2 mol Al x 26.98 g/mol = 53.96 g Al3 mol S x 32.07 g/mol = 96.21 g S
12 mol O x 16.00 g/mol = 192.00 g OMass of 1 mol of Al2(SO4)3= 342.17 g
43
C8H17OH HgI2
CH3OH
S8
One mole each of various substances
44
ExerciseWhat amount (moles) is represented by each of these samples?a) 20.0 mg caffeine, C8H10N4O2.
b) 2.72 x 1021 molecules of ethanol, C2H5OH.
c) 1.50 g of dry ice, CO2.
45
Percent Composition Percent composition:
Percentage by mass contributed by each element in a substance.Shows how many grams of each element exist in 100 g of a compound
mass of element in compoundmass of compound
Mass percent of an element:
Mass% = x 100%
46
Percent Composition
For iron in iron (III) oxide, (Fe2O3)
Molar mass of Fe2O3 = 159.69 g
Mass of Fe = 2 mol x 55.85 g/mol = 111.7 g
Mass % Fe = x 100% = 69.95%111.7
159.69
47
Sodium Hydrogen Carbonate, commonly called bicarbonate of soda, is used in many commercial products (antacids). It has the chemical formula NaHCO3. What are the mass percents of Na, H, C, and O.
Mass of Na = 1 mol x 22.99 g/mol = 22.99 g NaMass of H = 1 mol x 1.008 g/mol = 1.008 g HMass of C = 1 mol x 12.01 g/mol = 12.01 g CMass of O = 3 mol x 16.00 g/mol = 48.00 g O
84.01 g NaHCO3
Mass % Na: 22.99g/84.01g x 100% = 27.36%Mass % H: 1.008g/84.01g x 100 % = 1.200%Mass % C: 12.01g/84.01g x 100% = 14.30%Mass % O: 48.00g/84.01g x 100% = 57.14%
27.36% + 1.200% + 14.30% + 57.14% = 100%
Percent Composition