chapter 1 - introduction to electronics
DESCRIPTION
Chapter 1 - Introduction to Electronics. Introduction Microelectronics Integrated Circuits (IC) Technology Silicon Chip Microcomputer / Microprocessor Discrete Circuits. Signals Signal Processing Transducers. http://www.eas.asu.edu/~midle/jdsp/jdsp.html. Signals Voltage Sources - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/1.jpg)
Chapter 1 - Introduction to Electronics
Introduction
Microelectronics
Integrated Circuits (IC) Technology
Silicon Chip
Microcomputer / Microprocessor
Discrete Circuits
![Page 2: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/2.jpg)
Signals
Signal ProcessingTransducers
http://www.eas.asu.edu/~midle/jdsp/jdsp.html
![Page 3: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/3.jpg)
Signals
Voltage Sources
Current Sources
Thevenin & Norton
http://www.clarkson.edu/%7Esvoboda/eta/ClickDevice/refdir.htmlhttp://www.clarkson.edu/%7Esvoboda/eta/Circuit_Design_Lab/circuit_design_lab.htmlhttp://www.clarkson.edu/%7Esvoboda/eta/CircuitElements/vcvs.html
![Page 4: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/4.jpg)
Figure 1.1 Two alternative representations of a signal source: (a) the Thévenin form, and (b) the Norton form.
![Page 5: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/5.jpg)
Figure 1.2 An arbitrary voltage signal vs(t).
![Page 6: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/6.jpg)
Figure 1.3 Sine-wave voltage signal of amplitude Va and frequency f = 1/T Hz. The angular frequency v = 2pf rad/s.
![Page 7: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/7.jpg)
Signals
Voltage Sources
Current Sources
![Page 8: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/8.jpg)
http://www.clarkson.edu/~svoboda/eta/ClickDevice/super.htmlhttp://javalab.uoregon.edu/dcaley/circuit/Circuit_plugin.html
Signals
Voltage Sources
Current Sources
![Page 9: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/9.jpg)
Frequency Spectrum of Signals
Fourier Series
Fourier Transform
Fundamental and Harmonics
http://www.educatorscorner.com/experiments/spectral/SpecAn3.shtml
x
frequency
time
![Page 10: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/10.jpg)
Figure 1.4 A symmetrical square-wave signal of amplitude V.
![Page 11: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/11.jpg)
Figure 1.5 The frequency spectrum (also known as the line spectrum) of the periodic square wave of Fig. 1.4.
![Page 12: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/12.jpg)
Figure 1.6 The frequency spectrum of an arbitrary waveform such as that in Fig. 1.2.
![Page 13: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/13.jpg)
Figure 1.7 Sampling the continuous-time analog signal in (a) results in the discrete-time signal in (b).
![Page 14: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/14.jpg)
Defining the Signal or Function to be Analyzed:
f t( ) sin 0 t t( ) .2 cos 7 0 t
0 1 2 3 4 5 62
0
2
f t( )
t
Frequency Spectrum of Signals
Fourier Series
http://www.jhu.edu/%7Esignals/fourier2/index.html
![Page 15: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/15.jpg)
Frequency Spectrum of Signals
Fourier Series
Fourier Series (Trigonometric form) of f(t):
a01
T 0
T
tf t( )
d a0 0 average value
an
2
T0
T
tf t( ) cos n 0 t
d cosine coefficients
n varying from 1 to N
10 20 30 40 50 600
0.1
an
0
n
![Page 16: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/16.jpg)
Frequency Spectrum of Signals
Fourier Series
bn
2
T0
T
tf t( ) sin n 0 t
d sine coefficients
10 20 30 40 50 600
0.5
1
bn
0
n
![Page 17: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/17.jpg)
Frequency Spectrum of Signals
Fourier Series
Rearranging total expression to include a0 in the complete spectrum
a1n
an
b1n
bn
c1n
1
2a1
n 2 b1n 2 c
0a0
0 10 20 30 40 50 600
0.2
0.4
c1n
0
n
![Page 18: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/18.jpg)
Frequency Spectrum of Signals
Fourier Series
Reconstruction of time-domain function from trig. Fourier series:
f2 t( )
n1
an1
cos n1 0 t bn1
sin n1 0 t a0
0 1 2 3 4 5 62
0
2
f2 t( )
f t( )
t
![Page 19: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/19.jpg)
Frequency Spectrum of Signals
Fourier SeriesFourier Series (Complex Form) of f(t):
wn
1
2N
n
Cn
1
T 0
tf t( ) ei wn 0 t
d
0 10 20 30 40 50 600
0.02
0.04
Cn
0
n
![Page 20: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/20.jpg)
Fourier Transform of f(t) gives:
1
2N
12
N .25
1
2N
F 0
tf t( ) ei t
d
30 20 10 0 10 20 300
0.1
0.2
0.3
F ( )
0
The magnitude of F( ) yields the continuous frequency spectrum, and it is obviously of the form of the sampling function. The value of F(0) is A . A plot of |F( )| as a function of does not indicate the magnitude of the voltage present at any given frequency. What is it, then? Examination of F shows that, if f(t) is a voltage waveform, then F is dimensionally "volts per unit frequency," a concept that may be strange to most of us.
Frequency Spectrum of Signals
![Page 21: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/21.jpg)
http://www.jhu.edu/%7Esignals/fourier2/index.html
Frequency Spectrum of Signals
http://www.jhu.edu/%7Esignals/listen/music1.html
http://www.jhu.edu/%7Esignals/phasorlecture2/indexphasorlect2.htm
![Page 22: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/22.jpg)
Figure 1.8 Variation of a particular binary digital signal with time.
![Page 23: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/23.jpg)
Figure 1.9 Block-diagram representation of the analog-to-digital converter (ADC).
![Page 24: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/24.jpg)
Analog and Digital Signals
Sampling Rate http://www.jhu.edu/%7Esignals/sampling/index.html
Binary number systemhttp://scholar.hw.ac.uk/site/computing/activity11.asp
Analog-to-Digital Converterhttp://www.astro-med.com/knowledge/adc.htmlhttp://www.maxim-ic.com/design_guides/English/AD_CONVERTERS_21.pdf
Digital-to-Analog Converter
http://www.maxim-ic.com/ADCDACRef.cfm
![Page 25: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/25.jpg)
Figure 1.10 (a) Circuit symbol for amplifier. (b) An amplifier with a common terminal (ground) between the input and output ports.
![Page 26: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/26.jpg)
Figure 1.11 (a) A voltage amplifier fed with a signal vI(t) and connected to a load resistance RL. (b) Transfer characteristic of a linear voltage amplifier with voltage gain Av.
![Page 27: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/27.jpg)
Figure 1.12 An amplifier that requires two dc supplies (shown as batteries) for operation.
![Page 28: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/28.jpg)
Figure 1.13 An amplifier transfer characteristic that is linear except for output saturation.
![Page 29: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/29.jpg)
Figure 1.14 (a) An amplifier transfer characteristic that shows considerable nonlinearity. (b) To obtain linear operation the amplifier is biased as shown, and the signal amplitude is kept small. Observe that this amplifier is operated from a single power supply, VDD.
![Page 30: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/30.jpg)
Figure 1.15 A sketch of the transfer characteristic of the amplifier of Example 1.2. Note that this amplifier is inverting (i.e., with a gain that is negative).
![Page 31: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/31.jpg)
Figure 1.16 Symbol convention employed throughout the book.
![Page 32: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/32.jpg)
Figure 1.17 (a) Circuit model for the voltage amplifier. (b) The voltage amplifier with input signal source and load.
![Page 33: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/33.jpg)
Figure 1.18 Three-stage amplifier for Example 1.3.
![Page 34: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/34.jpg)
Figure 1.19 (a) Small-signal circuit model for a bipolar junction transistor (BJT). (b) The BJT connected as an amplifier with the emitter as a common terminal between input and output (called a common-emitter amplifier). (c) An alternative small-signal circuit model for the BJT.
![Page 35: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/35.jpg)
Figure E1.20
![Page 36: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/36.jpg)
Figure 1.20 Measuring the frequency response of a linear amplifier. At the test frequency v, the amplifier gain is characterized by its magnitude (Vo/Vi) and phase f.
![Page 37: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/37.jpg)
Figure 1.21 Typical magnitude response of an amplifier. |T(v)| is the magnitude of the amplifier transfer function—that is, the ratio of the output Vo(v) to the input Vi(v).
![Page 38: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/38.jpg)
Figure 1.22 Two examples of STC networks: (a) a low-pass network and (b) a high-pass network.
![Page 39: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/39.jpg)
Figure 1.23 (a) Magnitude and (b) phase response of STC networks of the low-pass type.
![Page 40: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/40.jpg)
Figure 1.24 (a) Magnitude and (b) phase response of STC networks of the high-pass type.
![Page 41: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/41.jpg)
Figure 1.25 Circuit for Example 1.5.
![Page 42: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/42.jpg)
Figure 1.26 Frequency response for (a) a capacitively coupled amplifier, (b) a direct-coupled amplifier, and (c) a tuned or bandpass amplifier.
![Page 43: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/43.jpg)
Figure 1.27 Use of a capacitor to couple amplifier stages.
![Page 44: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/44.jpg)
Figure E1.23
![Page 45: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/45.jpg)
Figure 1.28 A logic inverter operating from a dc supply VDD.
![Page 46: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/46.jpg)
Figure 1.29 Voltage transfer characteristic of an inverter. The VTC is approximated by three straightline segments. Note the four parameters of the VTC (VOH, VOL, VIL, and VIH) and their use in determining the noise margins (NMH and NML).
![Page 47: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/47.jpg)
Figure 1.30 The VTC of an ideal inverter.
![Page 48: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/48.jpg)
Figure 1.31 (a) The simplest implementation of a logic inverter using a voltage-controlled switch; (b) equivalent circuit when vI is low; and (c) equivalent circuit when vI is high. Note that the switch is assumed to close when vI is high.
![Page 49: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/49.jpg)
Figure 1.32 A more elaborate implementation of the logic inverter utilizing two complementary switches. This is the basis of the CMOS inverter studied in Section 4.10.
![Page 50: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/50.jpg)
Figure 1.33 Another inverter implementation utilizing a double-throw switch to steer the constant current IEE to RC1 (when vI is high) or RC2 (when vI is low). This is the basis of the emitter-coupled logic (ECL) studied in Chapters 7 and 11.
![Page 51: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/51.jpg)
Figure 1.34 Example 1.6: (a) The inverter circuit after the switch opens (i.e., for t 0). (b) Waveforms of vI and vO. Observe that the switch is assumed to operate instantaneously. vO rises exponentially, starting at VOL and heading toward VOH .
![Page 52: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/52.jpg)
Figure 1.35 Definitions of propagation delays and transition times of the logic inverter.
![Page 53: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/53.jpg)
Figure P1.6
![Page 54: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/54.jpg)
Figure P1.10
![Page 55: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/55.jpg)
Figure P1.14
![Page 56: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/56.jpg)
Figure P1.15
![Page 57: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/57.jpg)
Figure P1.16
![Page 58: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/58.jpg)
Figure P1.17
![Page 59: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/59.jpg)
Figure P1.18
![Page 60: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/60.jpg)
Figure P1.37
![Page 61: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/61.jpg)
Figure P1.58
![Page 62: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/62.jpg)
Figure P1.63
![Page 63: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/63.jpg)
Figure P1.65
![Page 64: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/64.jpg)
Figure P1.67
![Page 65: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/65.jpg)
Figure P1.68
![Page 66: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/66.jpg)
Figure P1.72
![Page 67: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/67.jpg)
Figure P1.77
![Page 68: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/68.jpg)
Figure P1.79
![Page 69: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/69.jpg)
Table 1.1 The Four Amplifier Types
![Page 70: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/70.jpg)
Vin Vout
Voltage gain (Av) = Vout/Vin
Linear - output is proportional to input
Amplifiers
Current amplifiers current gain (Ai) = Iout/Iin
Power amplifiers power gain (Ap) = Pout/Pin
![Page 71: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/71.jpg)
Amplifiers
Signal Amplification
Distortion
Non-Linear Distortion
Symbols
Gains – Voltage, Power, Current
Decibels
Amplifier Power SuppliesEfficiency
Voltage_Gain Av vo
vi
Power_Gain Ap load_power PL input_power PI
vo io
vI iI
Current_Gain Ai io
iI
Ap Av Ai
Voltage_gain_in_decibels 20 log Av dB
Coltage_gain_in_decibels 20 log Ai dB
Power_gain_in_decibels 10 log Ap dB
![Page 72: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/72.jpg)
Gain in terms of decibels
Typical values of voltage gain, 10, 100, 1000 depending on size of input signal
Decibels often used when dealing with large ranges or multiple stages
Av in decibels (dB) = 20log|Av|
Ai in decibels (dB) = 20log|Ai|
Ap in decibels (dB) = 10log|Ap|
Amplifiers
Av = 10 000 20log|10 000| = 80dBAv = 1000 20log|1000| = 60dBAv = 100 20log|100| = 40dBAv = 10 20log|10| = 20dBAv = -10 20log|-10| = 20dB
Av = 0.1 20log|0.1| = -20dB
Av negative - indicates a phase change (no change in dB)dB negative - indicates signal is attenuated
![Page 73: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/73.jpg)
Amplifiers
Example 1.1
PL 40.5 mW
PI Virms Iirms PI 0.05 mW
Ap
PL
PI Ap 810
W
W
Ap 10 log 810 Ap 29.085 dB
Pdc 10 9.5 10 9.5 Pdc 190 mW
Pdissipated Pdc PI PLPdissipated 149.55 mW
PL
Pdc100 21.316 %
Av9
1 Av 9 Ii 0.0001
Av 20 log 9 Av 19.085 dB
Io9
1000
Io 9 103 A Ai
Io
Ii Ai 90
A
A
Ai 20 log Ai Ai 39.085 dB Vorms9
2 Iorms
9
2
PL Vorms Iorms Virms1
2 Iirms
0.1
2
![Page 74: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/74.jpg)
An amplifier transfer characteristic that is linear except for output saturation.
Amplifiers
Saturation
An amplifier transfer characteristic that is linear except for output saturation.
![Page 75: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/75.jpg)
An amplifier transfer characteristic that shows considerable nonlinearity. (b) To obtain linear operation the amplifier is biased as shown, and the signal amplitude is kept small.
Amplifiers
Non-Linear Transfer Characteristics and Biasing
![Page 76: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/76.jpg)
Circuit model of a voltage amplifier
•EPOLY is a dependent source is SPICE; a voltage controlled voltage source (VCVS)
•EPOLY has a gain of Avo
•The input to EPOLY is the voltage across Ri
Vout = Avo Vin Ri = input resistanceRo = output resistance
+
Vout
-
+
Vin
-
I = 0
Amplifiers
![Page 77: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/77.jpg)
Voltage amplifier with input source and load
What should we design Ro to be?
•Av = Vout/Vin = Avo RL/(RL + Ro)
•Let Ro < < RL to make Av maximum
•Ideally Ro = 0
+
Vout
-
+
Vin
-
•Avo - gain of VCVS only, o indicates output is open
•Av - gain of entire circuit
Av changes with circuit, Avo does not!
Amplifiers
![Page 78: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/78.jpg)
Input resistance of amplifier circuit
+
Vout
-
+
Vin
-
What should we design Rin to be?
•Vin = Vs Ri/(Ri + Rs)
•Let Rin >> Rs to make Vin = Vs
•Ideally Rin = infinity
If Rin = infinity, then all of Vsmakes it to the the amplifier;otherwise part of the signal is lost
Amplifiers
![Page 79: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/79.jpg)
Basic characteristics of ideal amplifier
For maximum voltage transfer
Rout = 0
Rin = infinity
Amplifiers
![Page 80: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/80.jpg)
Amplifiers
Example 1.2
vI 0.6 0.61 0.69
vo vI 10 1011
e40 vI
0.58 0.6 0.62 0.64 0.66 0.68 0.70
5
10
vo vI
vI
![Page 81: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/81.jpg)
vI 0.673vI Find vI
vo 10 1011
e40 vI
givenvo 5
vI 0
Lplus 10Lplus vo 0( )
vo vI 10 1011
e40 vI
vI 0
vI 0.69vI Find vI
vo 10 1011
e40 vI
given
inital valuevI 0vo 0.3
Lminus 0.3
Amplifiers
Example 1.2
![Page 82: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/82.jpg)
Amplifiers
Example 1.2
highlight equation use symbolicsthen differentiate10 10
11e
40 vI
12500000000
exp 40 vI
12500000000
exp 40 0.673( ) 196.457
![Page 83: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/83.jpg)
Circuit Models For Amplifiers
Voltage Amplifiers
Common Models
Show example on board
![Page 84: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/84.jpg)
Circuit Models For Amplifiers
Example 1.3
Class assignment
![Page 85: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/85.jpg)
Circuit Models For Amplifiers
Other Amplifiers
Current
Transconductance
Transresistance
![Page 86: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/86.jpg)
Circuit Models For Amplifiers
Example 1.4
Large-signal equivalent-circuit models of the npn BJT operating in the active mode.
![Page 87: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/87.jpg)
Frequency Response of Amplifiers
Bandwidth
![Page 88: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/88.jpg)
Single-Time Constant Networks
http://www.clarkson.edu/%7Esvoboda/eta/plots/FOC.html
http://www.clarkson.edu/%7Esvoboda/eta/acWorkout/Switched_RCandRL.html
Frequency Response of Amplifiers
Bandwidth
RC Circuits – Class Exercise
![Page 89: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/89.jpg)
(a) Magnitude and (b) phase response of STC networks of the low-pass type.
Frequency Response of Amplifiers
Bandwidth
![Page 90: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/90.jpg)
Frequency Response of Amplifiers
![Page 91: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/91.jpg)
Frequency Response of Amplifiers
Bandwidth
![Page 92: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/92.jpg)
(a) Magnitude and (b) phase response of STC networks of the high-pass type.
Frequency Response of Amplifiers
![Page 93: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/93.jpg)
Frequency Response of Amplifiers
Example 1.5
Class assignment
![Page 94: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/94.jpg)
Frequency Response of Amplifiers
Classification of Amplifiers Based on Frequency Response
![Page 95: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/95.jpg)
Frequency Response of Amplifiers
Exercise 1.6
Class assignment
![Page 96: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/96.jpg)
The Digital Logic Inverter
Function
Transfer Characteristics
Noise Margins
![Page 97: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/97.jpg)
The Digital Logic Inverter
Function
Transfer Characteristics
Noise Margins
![Page 98: Chapter 1 - Introduction to Electronics](https://reader035.vdocuments.mx/reader035/viewer/2022062309/56815712550346895dc4b1f7/html5/thumbnails/98.jpg)
The Digital Logic Inverter
Inverter Implementation