19.CATIA Interactive Drafting 1 (ID1)

Addresses all 2D design and drawing production requirements.

20.CATIA Drafting 1 (DR1)

Provides the tools needed to produce industrial drawings. It includes data interfaces to the most

frequently used industry standards, including CADAM drawings.

I.Functional Tolerancing and Annotation

21.CATIA 3D Functional Toleracing and Annotation 1 (FT1)

Defines and manages tolerance specifications and annotations on 3D parts.

22.CATIA 3D Functional Tolerancing and Annotation 2 (FTA)

Defines and manages tolerance specifications and annotations on 3D parts, with dynamic

assistance for standards compliance checking.

J.Drawing Production

23.CATIA Drawing Production 2 (DP2)

This configuration provides all of the required 2D drafting capabilities for production of industrial

drawings, either from 3D parts or using a pure 2D methodology. As a CATIA P2 configuration, this

solution offers integration tools for compatibility with CATIA Version 4. It includes data interfaces

to most frequently used industry standards, including CADAM drawings.

K.Digital Mock-up

24.CATIA DMU Navigator 1 (DN1)

Performs collaborative DMU review using powerful visualisation, navigation and

communication tools.

25.CATIA DMU Navigator 2 (DMN)

Performs advanced collaborative DMU review, packaging and pre-assembly using

optimum visualisation, navigation and communication tools.

26.DMU Space Analysis 1 (SP1)

Performs DMU verification using interference detection, section analysis,

measurement and 3D geometry comparison tools.

27.DMU Space Analysis 2 (SPA)

Performs optimum DMU verification using advanced interference detection and

analysis, superior sectioning analysis, measurement, distance analysis and 3D geometry

comparison tools.

28.DMU Fitting Simulator 2 (FIT)

Defines, simulates and analyses assembly/ disassembly operations for digital

mock-ups of all sizes.

29.DMU Kinematics Simulator 2 (KIN)

Defines, simulates, and analyses mechanisms for digital mock-ups of all sizes.