catalog 2017 inspired by our customers€¢ tank system ships pre-assembled for quick installations...

CATALO

G 2017

STENNER1957-2017

INSPIRED BY OUR CUSTOMERS

STENNER PUMP ADVANTAGES

Self-priming

Can inject off-gassing solutions

Easy tube replacement without tools

3 point roller assists anti-siphoning

Food grade pump tube

Output reproducibility

Output volume not affected by back pressure

Solid one piece tube construction

Tube lubrication not required

No vapor lock or loss of prime

Foot valve not required to prime

QuickPro® PUMP LINE• Robust construction

• Patent pending QuickPro® pump head

• Tube replacement without tools

ECON PUMP LINE• Compact, designed for light duty

• Patented quick release pump head

• Tube replacement without tools

CATALOG CONTENTS

PUMPS 2-31QuickPro® Pump Line 2-16Econ Pump Line 17-31

METER SYSTEMS 16, 19, 22, 25, 32, 33

ACCESSORIES 34-42Tank Systems 34Tanks 35Mixer 36Flow Switch 37PCM 38-39Water Meter 40-42

PARTS 43-54Pump Tubes 43Pump Heads & Parts 44-47Econ Pump Parts 47-49Check Valves, Misc. Parts 48-49Motors & Parts 50-52Feed Rate Control & Parts 53Mixer Parts 54Water Meter Parts 54

REFERENCES 55-58Parts Index 55Chemical Guide 56-57Policies 58

CLASSIC SERIES

Double Head FixedDouble Head Adjustable

Features

• Advantages of Stenner peristaltic pumps on page 1

• Fast tube replacement without tools with patent pending QuickPro® pump head

• Adjustable models:- External adjustable dial ring on feed rate control- 20:1 turndown, 2.5% increments

• Single head models: - Available as Tank Systems: 7.5, 15, 30 gallon - Fixed output version can be utilized for proportional dosing, refer to pages 32-33 and 38-39

• Components are interchangeable between models

• Tank System ships pre-assembled for quick installations

Feed RateControl

Single Head FixedSingle Head Adjustable

ProportionalInjection System

Feed RateControl

Quick Facts

45 SERIES• Single Head Adjustable or Fixed output

• 0.2 to 22.0 gpd, pressures to 100 psi


• 26 rpm

85 SERIES• Single Head Adjustable or Fixed output



• 44 rpm

100 SERIES• Double Head Adjustable or Fixed output



• 26 rpm

170 SERIES• Double Head Adjustable or Fixed output



• 44 rpm

Versatile and Time-Tested

For over 50 years, the versatile Classicseries remains a popular choice withinstallers. The pump is easy to service orconvert to another model. Injection can bedirectly into the water line and activatedby a pressure switch or controller.

ElectromechanicalSingle or Double Head

Adjustable or Fixed

2 www.stenner.com

Accessory Kit Shipped with Each Pump

3 Connecting nuts 1/4" or 3/8"

3 Ferrules 1/4" or 6 mm EUROPE

1 Injection check valve 100 psi (6.9 bar) OR 1 injection fitting 25 psi (1.7 bar)

1 Weighted suction line strainer 1/4", 3/8" or 6 mm EUROPE

1 20' Roll suction/discharge tubing 1/4" or 3/8", white or UV black OR 6 mm white EUROPE

1 Additional pump tube

2 Additional latches

1 Mounting bracket

1 Manual

10.6"5.3"

6.0"

Single Head AdjustableShipping Weight 9 lbs (4.1 kg)Box Dimensions13 x 8 x 9 in. (33 x 20 x 23 cm)Product Dimensions

5.3"

6.0"

12.7"5.3"

6.0"

10.2"

Double Head AdjustableShipping Weight 10 lbs (4.5 kg)Box Dimensions18 x 8 x 10 in. (46 x 20 x 25 cm)Product Dimensions

Double Head FixedShipping Weight 9 lbs (4.1 kg)Box Dimensions18 x 8 x 10 in. (46 x 20 x 25 cm)Product Dimensions

SpecificationsFlow Rate Output ControlAdjustable model: External dial ringReproducibility ±2%Maximum Working Pressure 25 psi (1.7 bar), 100 psi (6.9 bar)Maximum Operating Temperature 125°F (52°C)Maximum Suction Lift25 ft (7.6 m) vertical lift, based on waterMotor Type 1/30 HP, shaded pole, class BDuty Cycle ContinuousMotor Voltage (Amp Draw)120V 60Hz 1PH (1.7), 220V 60Hz 1PH (0.9),230V 50Hz 1PH (0.9) INTERNATIONAL,250V 50Hz 1PH (0.9) INTERNATIONALPower Cord Type SJTOWPower Cord Plug End120V 60Hz NEMA 5/15, 220V 60Hz NEMA 6/15, 230V 50Hz CEE 7/VII, 250V 50Hz CEE 7/VII

Materials of ConstructionAll Housings Polycarbonate Pump Tube & Check Valve Duckbill Santoprene®*,optional Versilon™**, FDA approvedCV Duckbill with Versilon™** Tube Pellathane®†

Pump Head Rollers HDPERoller Bushings Oil impregnated sintered bronzeSuction/Discharge Tubing, Ferrules 1/4" & 6 mmPolyethylene, FDA approvedTube Fittings, Check Valve FittingsBlack fittings: PP, NSF listedConnecting Nuts PP or Type 1 Rigid PVC3/8" Adapter Type 1 Rigid PVC, NSF listedSuction Line Strainer PP or Type 1 Rigid PVC bodywith Type 1 Rigid PVC cap, NSF listed; ceramic weightAll Fasteners Stainless steelPump Head Latches Polypropylene

Agency Listings• Models (Santoprene® only) tested by Water Quality Association to conform to ANSI/NSF STD 61 & 372• Adjustable models (Santoprene® only) tested by ETL to conform to ANSI/NSF STD 50• Fixed output models (Santoprene® only) tested by ETL to conform to ANSI/NSF STD 50 only when used with ANSI/NSF STD 50 listed controllers

Listings vary by model* Santoprene® is a registered trademark of Exxon Mobil Corporation.** Versilon™ is a registered trademark of Saint-Gobain Performance Plastics.

† Pellathane® is a registered trademark of The Dow Company.

5.3"

6.0"

8.0"

Single Head FixedShipping Weight 8 lbs (3.6 kg)Box Dimensions13 x 8 x 9 in. (33 x 20 x 23 cm)Product Dimensions

Weights and Dimensions

USE ONLY WITH ANSI/NSF 50LISTED CONTROLLERS

USA and Canada 800.683.2378, International 904.641.1666 3

CLASSIC SERIES

Single Head Adjustable - Flow Rate Output Chart 0-25 psi (0-1.7 bar) Approximate 20:1 turndown, 2.5% increments

Model Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters Prefix per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute

45M1 45MJL1 1 0.2 to 3.0 0.8 to 11.4 0.01 to 0.13 0.03 to 0.48 0.02 to 0.27 0.56 to 7.92 0.6 to 9.1 0.02 to 0.38 0.31 to 6.32










NOTICE: The information within these charts is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testingenvironment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of analyticaltesting to confirm their outputs.

85 SE

RIES

Approximate Output @ 60Hz Approximate Output @ 50Hz

Single Head Adjustable - Flow Rate Output Chart 26-100 psi (1.8-6.9 bar) Approximate 20:1 turndown, 2.5% increments


45MHP2 45MJH1 1 0.2 to 3.0 0.8 to 11.4 0.01 to 0.13 0.03 to 0.48 0.02 to 0.27 0.56 to 7.92 0.6 to 9.1 0.02 to 0.38 0.31 to 6.32







45 SE

RIES

85 SE

RIES

4 www.stenner.com

45 SE

RIES

NOTE: Injection check valve included with pumps rated 26-100 psi (1.8-6.9 bar).

Item Number Builder

Voltage & Hertz A 120V 60Hz B 220V 60Hz C 230V 50Hz, CEE7 Cord INTERNATIONAL D 250V 50Hz, CEE7 Cord INTERNATIONALContact the factory foradditional voltage and cord options.

Tube Material S Santoprene®

T Versilon™

(#7 not available)Refer to the chemicalresistance guide forchemical compatibility.

Suction & Discharge Tubing1 1/4" White2 1/4" UV Black3 3/8" White4 3/8" UV Black5 6 mm White EUROPE

O.D. does not affect output.

Tank SystemS7G 7.5-Gallon UV GrayS7N 7.5-Gallon WhiteS1G 15-Gallon UV GrayS1N 15-Gallon WhiteS3G 30-Gallon UV GrayS3N 30-Gallon White• For single head pump only.• Tanks also sold separately

on page 35.

Omit if not orderingTank System

How to build an Item Number1. Refer to above Flow Rate Output

Chart to select a pump.

2. Select the Item Number Prefix from the output chart.

3. Select the remaining options to complete the item number.

Item Number Prefix


Single Head Fixed - Flow Rate Output Chart 26-100 psi (1.8-6.9 bar) Model Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters Prefix per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute

45MPHP2 45MFH1 1 3.0 11.4 0.13 0.48 0.27 7.92 9.1 0.38 6.32

45MPHP10 45MFH2 2 10.0 37.9 0.42 1.58 0.89 26.32 30.3 1.26 21.04

45MPHP22 45MFH7 7 22.0 83.3 0.92 3.47 1.96 57.85 66.6 2.78 46.25

85MPHP5 85MFH1 1 5.0 18.9 0.21 0.79 0.44 13.13 15.1 0.63 10.49

85MPHP17 85MFH2 2 17.0 64.4 0.71 2.68 1.51 44.65 51.5 2.15 35.76

85MPHP40 85MFH7 7 40.0 151.4 1.67 6.31 3.55 105.14 121.1 5.05 84.1085 SE

RIES


Single Head Fixed - Flow Rate Output Chart 0-25 psi (0-1.7 bar) Model Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters Prefix per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute

45MP1 45MFL1 1 3.0 11.4 0.13 0.48 0.27 7.92 9.1 0.38 6.32

45MP2 45MFL2 2 10.0 37.9 0.42 1.58 0.89 26.32 30.3 1.26 21.04

45MP3 45MFL3 3 22.0 83.3 0.92 3.47 1.96 57.85 66.6 2.78 46.25

45MP4 45MFL4 4 35.0 132.5 1.46 5.52 3.11 92.01 106.0 4.42 73.61

45MP5 45MFL5 5 50.0 189.3 2.08 7.89 4.44 131.43 151.4 6.31 105.14

85MP1 85MFL1 1 5.0 18.9 0.21 0.79 0.44 13.13 15.1 0.63 10.49

85MP2 85MFL2 2 17.0 64.4 0.71 2.68 1.51 44.65 51.5 2.15 35.76

85MP3 85MFL3 3 40.0 151.4 1.67 6.31 3.55 105.14 121.1 5.05 84.10

85MP4 85MFL4 4 60.0 227.1 2.50 9.46 5.33 157.71 181.7 7.57 126.18

85MP5 85MFL5 5 85.0 321.8 3.54 13.40 7.55 223.40 257.4 10.73 178.75

85 SE

RIES

45

SERI

ES




45 SE

RIES

ElectromechanicalSingle Head

Adjustable or Fixed

Item Number Builder

Voltage & Hertz A 120V 60Hz B 220V 60Hz C 230V 50Hz, CEE7 Cord INTERNATIONAL D 250V 50Hz, CEE7 Cord INTERNATIONALContact the factory foradditional voltage and cord options.


T Versilon™




Tank SystemS7G 7.5-Gallon UV GrayS7N 7.5-Gallon WhiteS1G 15-Gallon UV GrayS1N 15-Gallon WhiteS3G 30-Gallon UV GrayS3N 30-Gallon White• For single head pump only.• Tanks also sold separately

on page 35.


Item Number Prefix





Double Head Adjustable - Flow Rate Output Chart 0-25 psi (0-1.7 bar) Approximate 20:1 turndown, 2.5% increments


100DM1 100JL1 1 0.3 to 6.0 1.1 to 22.7 0.01 to 0.25 0.05 to 0.95 0.03 to 0.53 0.76 to 15.76 0.9 to 18.2 0.04 to 0.76 0.61 to 12.64










170 S

ERIES


Double Head Adjustable - Flow Rate Output Chart 26-100 psi (1.8-6.9 bar) Approximate 20:1 turndown, 2.5% increments


100DMHP5 100JH1 1 0.3 to 6.0 1.1 to 22.7 0.01 to 0.25 0.05 to 0.95 0.03 to 0.53 0.76 to 15.76 0.9 to 18.2 0.04 to 0.76 0.61 to 12.64





170

SERI

ES


6 www.stenner.com

100 S

ERIES

100

SERI

ES


CLASSIC SERIES

Item Number Builder

Voltage & Hertz A 120V 60Hz B 220V 60Hz C 230V 50Hz, CEE7 Cord INTERNATIONAL D 250V 50Hz, CEE7 Cord INTERNATIONALContact the factory for additionalvoltage and cord options.


T Versilon™




Item Number Prefix






Double Head Fixed - Flow Rate Output Chart 0-25 psi (0-1.7 bar) Model Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters Prefix per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute

100DMP1 100FL1 1 6.0 22.7 0.25 0.95 0.53 15.76 18.2 0.76 12.64

100DMP2 100FL2 2 20.0 75.7 0.83 3.15 1.78 52.57 60.6 2.53 42.06

100DMP3 100FL3 3 44.0 166.5 1.83 6.94 3.91 115.63 133.2 5.55 92.50

100DMP4 100FL4 4 70.0 265.0 2.92 11.04 6.22 184.03 212.0 8.83 147.22

100DMP5 100FL5 5 100.0 378.5 4.17 15.77 8.88 262.88 302.8 12.61 210.28

170DMP1 170FL1 1 10.0 37.9 0.42 1.58 0.89 26.32 30.3 1.26 21.04

170DMP2 170FL2 2 34.0 128.7 1.42 5.36 3.02 89.38 102.6 4.29 71.55

170DMP3 170FL3 3 80.0 302.8 3.33 12.62 7.11 210.28 242.2 10.09 168.22

170DMP4 170FL4 4 120.0 454.2 5.00 18.93 10.66 315.42 363.4 15.14 252.36

170DMP5 170FL5 5 170.0 643.6 7.08 26.80 15.10 446.88 514.8 21.45 357.50

170 S

ERIES


Double Head Fixed - Flow Rate Output Chart 26-100 psi (1.8-6.9 bar) Model Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters Prefix per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute

100DMPHP5 100FH1 1 6.0 22.7 0.25 0.95 0.53 15.76 18.2 0.76 12.64

100DMPHP20 100FH2 2 20.0 75.7 0.83 3.15 1.78 52.57 60.6 2.53 42.06

170DMPHP9 170FH1 1 10.0 37.9 0.42 1.58 0.89 26.32 30.3 1.26 21.04

170DMPHP34 170FH2 2 34.0 128.7 1.42 5.36 3.02 89.38 102.6 4.29 71.55


100

SERI

ES17

0 SE

RIES

100 S

ERIES



ElectromechanicalSingle Head

Adjustable or Fixed

Item Number Builder

Voltage & Hertz A 120V 60Hz B 220V 60Hz C 230V 50Hz, CEE7 Cord INTERNATIONAL D 250V 50Hz, CEE7 Cord INTERNATIONALContact the factory for additionalvoltage and cord options.


T Versilon™




Item Number Prefix





SVP SERIES

8 www.stenner.com

SVP1

SVP4

Two Sub-Series, SVP1 and SVP4

The SVP is categorized into two sub-series, SVP1 and SVP4. The SVP1 ismanually adjusted using the keypad. The SVP4 is designed to respond directlyto a 4-20mA input signal from water treatment controls. The pump is equippedwith an external port to accept the signal or it can be set to a manual mode andadjusted with the arrows on the keypad.

Features


• Fast tube replacement without tools with patentpending QuickPro® pump head

• DC motor

• Motor and pump head detachable without tools

• Rugged polycarbonate housing

• Heavy duty gear motor

• 4 button keypad: prime, on/off, up & down arrows

Digital keypad

Quick Facts



• Digital keypad with LED display

• 20:1 turndown, 1% increments, non-scalable

SVP1• Manual output control

SVP4• Automatic output control via 4-20mA signal or manually adjusted

Well-Suited for Industrial Applications

The SVP series is an adjustable, variable speed,peristaltic metering pump suitable for industrialapplications, municipal and wastewater treatmentplants. The pump can accept a 4-20mA signal from awater treatment control such as a pH or ORP monitorto pace the pump to maintain proper water chemistryand treat effluent discharge water. The output isadjusted by increasing or decreasing the motor speed.

Variable Speed,4-20mA Pump


Shipping Weight 10 lbs (4.5 kg)Box Dimensions 14 x 9 x 9 in. (35 x 23 x 23 cm)Product Dimensions

7.0"

10.1"6.1"









1 Manual


SpecificationsFlow Rate Output Control Digital keypadReproducibility ±2%Maximum Working Pressure 25 psi (1.7 bar), 100 psi (6.9 bar)Maximum Operating Temperature 125°F (52°C)Maximum Suction Lift25 ft (7.6 m) vertical lift, based on waterMotor Type 12VDC gear motorShaft rpm 47Duty Cycle ContinuousMotor Voltage (Amp Draw)120V 50/60Hz 1PH (1.5), 220V 50/60Hz 1PH (1.5),12VDC (4.2), 230V 50/60Hz 1PH (1.5) INTERNATIONAL,250V 50/60Hz 1PH (1.5) INTERNATIONALPower Cord Type120V, 220V, 230V, 250V: SJTOW12VDC: VW-1Power Cord Plug End120V 60Hz NEMA 5/15, 220V 60Hz NEMA 6/15,230V 50Hz CEE 7/VII, 250V 50Hz CEE 7/VII12VDC Pigtail connection

Materials of ConstructionAll Housings Polycarbonate Pump Tube & Check Valve Duckbill Santoprene®*,optional Versilon™**, FDA approvedCV Duckbill with Versilon™** Tube Pellathane®†

Pump Head Rollers HDPERoller Bushings Oil impregnated sintered bronzeSuction/Discharge Tubing, Ferrules 1/4" & 6 mmPolyethylene, FDA approvedTube Fittings, Check Valve FittingsBlack fittings: PP, NSF listedConnecting Nuts PP or Type 1 Rigid PVC3/8" Adapter Type 1 Rigid PVC, NSF listedSuction Line Strainer PP or Type 1 Rigid PVC bodywith Type 1 Rigid PVC cap, NSF listed; ceramic weightAll Fasteners Stainless steelPump Head Latches Polypropylene

Agency ListingsModels (Santoprene®* only) tested by Water Quality Association to conform to ANSI/NSF STD 61 & 372.

NOTE: Listings vary by model. 12VDC pumps do not carry anyagency listings.

* Santoprene® is a registered trademark of Exxon Mobil Corporation.** Versilon™ is a registered trademark of Saint-Gobain Performance Plastics.


10 www.stenner.com

SVP - Flow Rate Output Chart 0-25 psi (0-1.7 bar) Model Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Prefix per Day per Day per Hour per Hour per Minute per Minute

SVP1L1 SVP1L1 1 0.3 to 5.0 1.1 to 18.9 0.01 to 0.21 0.05 to 0.79 0.03 to 0.44 0.76 to 13.13










4-20

mA IN

PUT*

Approximate Output @ 50/60Hz

MAN

UAL

SVP - Flow Rate Output Chart 26-100 psi (1.8-6.9 bar) Model Item Number Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Prefix per Day per Day per Hour per Hour per Minute per Minute

SVP1H1 SVP1H1 1 0.3 to 5.0 1.1 to 18.9 0.01 to 0.21 0.05 to 0.79 0.03 to 0.44 0.76 to 13.13





SVP4H7 SVP4H7 7 2.0 to 40.0 7.6 to 151.4 0.08 to 1.67 0.32 to 6.31 0.18 to 3.55 5.27 to 105.144-20

mA IN

PUT*

* Input Signal Voltage/Resistance Max. 48 VDC/128 ohm.


MAN

UAL



SVP SERIES

Item Number Builder

Voltage & Hertz A 120V 60Hz B 220V 60Hz C 230V 50Hz, CEE7 Cord INTERNATIONAL D 250V 50Hz, CEE7 Cord INTERNATIONAL V 12VDC (No agency listings)Contact the factory for additionalvoltage and cord options.


T Versilon™


Suction & Discharge Tubing1 1/4" White3 3/8" White5 6 mm White EUROPE


Item Number Prefix






S SERIES

S SERIES

Designed for Demanding Applications

The S Series is an advanced peristaltic metering pump built to NEMA 4X fordemanding applications. Select from multiple operational modes andperformance indicators that readily interface with process control systemsutilizing a 4-20mA output signal and three relay outputs. Navigate through themany pump configurations with the tactile keypad and OLED display tocustomize the parameters for the specific application.

Quick Facts



• Digital keypad with OLED display

• Tube leak detector

• Tube life timer

• Password protection

Features



• Brushless DC motor with ball bearing support

• Switch mode power supply

• Totally enclosed housing

• NEMA 4X

• NSF 61 & 372

• cULus indoor/outdoor

• CE IP65

Control Panel

Programable Communication

Pump Condition Control Mode Display Alarm on Output Relay to another

pump control panel pump, system or device

Tube Change ✓ not applicable

Tube Leak ✓ ✓ Standby ✓ ✓ Drive Fault ✓ ✓ Off ✓ ✓ Repeat Pulse not applicable ✓ Run not applicable ✓ Mode Change not applicable ✓ Transfer not applicable ✓ High Signal 4-20mA* or 0-10VDC* ✓ ✓ Low Signal 4-20mA* or 0-10VDC* ✓ ✓ High Flow Hall Effect or PPM Feed ✓ ✓ Low Flow Hall Effect ✓ ✓ Signal Overrun Pulse ✓ ✓* Scalable, invertible

Manual4-20mA*

0-10VDC*

PulseHall Effect

7 Day TimerPPM Feed

Cycle Timer

Variable SpeedMultiple Control ModesPerformance Indicators

Performance Indicators

SpecificationsFlow Rate Output ControlVaries per control mode; digital keypadReproducibility ±2%Maximum Working Pressure25 psi (1.7 bar), 100 psi (6.9 bar)Maximum Operating Temperature 104°F (40°C)Maximum Suction Lift25 ft (7.6 m) vertical lift, based on waterMotor Type Brushless DC motorDuty Cycle ContinuousMotor Voltage (Amp Draw) 120V 60Hz 1PH (0.6), 230V 50Hz 1PH (0.3)Power Cord Type120V 60Hz SJTOWA, 230V 50Hz H05RNFPower Cord Plug End 120V 60Hz 15P, 230V 50Hz CEE7/7, 230V 50Hz SEV1011Hall Effect Max. Input Frequency 100 KHzRPM VariableRPM (maximum) 45RPM (gradient) By %The % sets the speed and is not 1 to 1 for RPM.

Maximum Altitude 6562 ft. (2000 m)Maximum Viscosity 1500 CentipoisePulse Duration Required 10 millisecondsMinimum duration required for pump to read signal.

Materials of ConstructionAll Housings Polycarbonate Pump Tube & Check Valve DuckbillSantoprene®*, optional Versilon™**, FDA approvedCV Duckbill with Versilon™** Tube Pellathane®†

Pump Head Rollers Polyethylene Roller Bushings Oil Impregnated sintered bronzeSuction/Discharge Tubing, Ferrules 1/4" & 6 mmPolyethylene, FDA approvedTube Fittings, Injection FittingsType 1 Rigid PVC or Polypropylene, NSF ListedConnecting NutsType 1 Rigid PVC or Polypropylene3/8" Adapter Type 1 Rigid PVC, NSF ListedSuction Line Strainer Polypropylene or Type 1Rigid PVC body with Type 1 Rigid PVC Cap, NSFlisted; ceramic weightAll Fasteners Stainless steelPump Head Latches Polypropylene

Agency ListingsModels (Santoprene® only) tested byIAPMO to conform to ANSI/NSF STD61 & 372.

* Santoprene® is a registered trademark of Exxon Mobil Corporation.** Versilon™ is a registered trademark of Saint-Gobain Performance Plastics.


12 www.stenner.com

S SERIES


7.2"









1 Mounting bracket

1 Quick start guide


11.0"

THIS PUMP IS TESTED AND CERTIFIED BY IAPMO ACCORDING TO ANSI/NSF 61 FOR CONTACT WITH SODIUM HYPOCHLORITE AND WATER ONLY AND NSF/ANSI 372.

5.9"

Item Number Prefix


S Series - Flow Rate Output Chart 25 psi (1.7 bar) maximum Model Item Number Pump Tube Turndown Gallons Liters Gallons Liters Ounces Milliliters Ounces Milliliters Prefix Ratio per Day per Day per Hour per Hour per Hour per Hour per Minute per Minute

S3003 S3003 3 100:1 0.40 to 40 1.51 to 151 0.017 to 1.67 0.063 to 6.31 2.13 to 213 63.09 to 6309 0.036 to 3.56 1.05 to 105





NOTE: Injection check valve included with pumps rated 100 psi (6.9 bar) maximum.

S Series - Flow Rate Output Chart 100 psi (6.9 bar) maximum Model Item Number Pump Tube Turndown Gallons Liters Gallons Liters Ounces Milliliters Ounces Milliliters Prefix Ratio per Day per Day per Hour per Hour per Hour per Hour per Minute per Minute





Variable SpeedMultiple Control ModesPerformance Indicators

Item Number Builder

Voltage & Hertz AA 120V 60Hz DC 230V 50Hz, CEE7 Cord INTERNATIONAL DE 230V 50Hz, SEV1001 Cord INTERNATIONALContact the factory for additionalvoltage and cord options.

Tube Material 1 Santoprene®

2 Versilon™




N





M128 SERIES

M128

M128 Meter System

Features



• A water bypass is not needed; there is no waterrestriction or pressure loss

• No need for back pressure valves and filtersupstream to pull out grit, sand and debris

• Solution is not in contact with moving parts

M128 Tank System

Potentiometer

1:128 Injection for Livestock Water Treatment

The M128, also referred to as a medicator, doses solution at a 1:128 ratio toinject livestock water with sanitizers, disinfectants, nutrients and medication.Featuring an internal relay, the pump has a cable with four lead wires; two areconnected to the water meter. For installations with a house controller, the tworemaining wires are connected to the controller to register water consumption.If the pump is placed in standby, the internal relay allows the pulse meter tocontinue to register water consumption with the house controller.

M128 Meter System or Tank System

For convenient and quick installations or turnkey operations, the M128 MeterSystem is equipped with the pump and corresponding dry contact 3/4" or 1"water meter mounted on a heavy duty panel. The plastic water meter is certifiedwith WQA under ANSI/NSF 372 for low lead.

The pre-packaged tank system is equipped with the pump mounted to a 7.5, 15 or 30 gallon capacity tank. Select UV Gray for outdoor installations ortranslucent white.

Quick Facts

• Potentiometer with adjustable pulse rate 1, 2, 4, 10 ppg (10 ppg in M07 model only) or 1 ppl

• Standby setting

• Internal relay

M05• 8.4 oz/min, pressures to 25 psi

M07• 3.5 oz/min, pressures to 100 psi

Activated by a Pulse Water Meter

The M128 is actuated by a dry contact, pulse watermeter to automatically inject solution proportional to thewater flow at a rate of 1 ounce of solution to 128 ouncesof process water. The pump accepts meter rates of 1, 2,4 or 10 pulses per gallon or 1 pulse per liter. The meterrates are adjusted with the pump's potentiometer. Thestandby setting can stop the pump from injecting whenit receives a signal. The internal relay feature allows the water meter to send a signal, if the pump is instandby mode.

14 www.stenner.com

1:128 MedicatorInternal Relay


SpecificationsFlow Rate Output ControlFixed output, interfaces with water meterMaximum Operating Temperature 104°F (40°C)Maximum Suction Lift25 ft (7.6 m) vertical lift, based on waterMotor Type 24VDC, 2.0 A, Brushed DC, 1/30 HPDuty Cycle ContinuousShaft rpm 55Motor Voltage (Amp Draw)120V 60Hz 1PH (0.5) 220V 60Hz 1PH (0.33)Power Cord Type SJTOWPower Cord Plug End120V 60Hz NEMA 5/15220V 60Hz NEMA 6/1

Materials of ConstructionAll Housings Polycarbonate Pump Tube & Check Valve DuckbillSantoprene®*, FDA approvedPump Head Rollers HDPERoller Bushings Oil impregnated sintered bronzeSuction/Discharge Tubing, Ferrules 1/4"Polyethylene, FDA approvedTube Fittings, Check Valve FittingsBlack fittings: PP, NSF listedConnecting Nuts PP or Type 1 Rigid PVCSuction Line Strainer PP or Type 1 Rigid PVC bodywith Type 1 Rigid PVC cap, NSF listed; ceramic weightAll Fasteners Stainless steelPump Head Latches Polypropylene

Agency Listings

* Santoprene® is a registered trademark of Exxon Mobil Corporation.

M128 PumpShipping Weight 10 lbs (4.5 kg)Box Dimensions 14 x 9 x 9 in. (35 x 23 x 23 cm)Product Dimensions

5.9"

6.2" 10.2"

M128 Meter SystemShipping Weight 21 lbs (9.5 kg)Box Dimensions 24 x 23 x 12 in. (61 x 58 x 30 cm)


3 Connecting nuts 1/4"

3 Ferrules 1/4"


1 Weighted suction line strainer 1/4"

1 20' Roll suction/discharge tubing 1/4"



1 Mounting bracket

1 Manual


16 www.stenner.com

M128 - Flow Rate Output Chart 0-25 psi (0-1.7 bar) Model Item Number Pump Tube Ounces Gallons Gallons Milliliters Liters Liters Prefix per Minute per Hour per Day per Minute per Hour per Day

M05 M05 5 8.4 3.9 95.0 249.7 14.9 359.6

Approximate Maximum Output @ 50/60Hz

Maximum system water flow for 1:128 dosing is 8.4 gallons/minute or 31.8 liters/minute.

M128 - Flow Rate Output Chart 26-100 psi (1.8-6.9 bar) Model Item Number Pump Tube Ounces Gallons Gallons Milliliters Liters Liters Prefix per Minute per Hour per Day per Minute per Hour per Day

M07 M07 7 3.5 1.6 40.0 105 6.3 151.4


Maximum system water flow for 1:128 dosing is 3.5 gallons/minute or 13.2 liters/minute.

NOTICE: The information within these charts is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testingenvironment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means ofanalytical testing to confirm their outputs.


Alternative Sizing for M07 Model using 1 pulse/gallon meter Dosage oz/gal Dosage Ratio Max. System Water Pulse Setting Flow gal/min

1.0 1:128 3.5 1

0.50 1:256 7.0 2

0.25 1:512 14.0 4

NOTE: 1 oz = 29.57 ml ; 1 gallon = 3.78 liters. Contact factory for assistance with sizing.

M128 SERIES

Item Number Builder

Meter System Panel341P 3/4" 1 pulse/gallon342P 3/4" 2 pulses/gallon344P 3/4" 4 pulses/gallon011P 1" 1 pulse/gallon012P 1" 2 pulses/gallon014P 1" 4 pulses/gallon

Voltage & Hertz 1 120V 60Hz 2 220V 60Hz


How to build an Item Number1. Refer to above Flow Rate Output Chart to select a pump.



Tank System and Meter System are two separate systems andare not sold as one.

Item Number Prefix

Tank System7G 7.5-Gallon UV Gray7N 7.5-Gallon White1G 15-Gallon UV Gray1N 15-Gallon White3G 30-Gallon UV Gray3N 30-Gallon White

Tanks also sold separately on page 35.

NOTE: M128 includes 1/4" white suction/discharge tubing only.

Omit if not orderingMeter System


ECON STENNICATOR Meter Systems - Single and Dual

ECON STENNICATOR

Pulse Dial

ECON Tank System

Quick Facts

• 2.7 ounces per minute, pressures to 80 psi

• 1 or 10 ppg and 1 ppl water meter pulse settings

• Internal relay

• Standby setting

• Wall adapter power supply

Compact and Water Meter Activated

The Econ Stennicator injects product at a fixed ratio of 1:128.The pulse from the water meter activates the pump at a fixedrun time to deliver the proper dosage. The pump has threepulse settings, adjustable with a potentiometer, toaccommodate 1 or 10 pulses per gallon or 1 pulse per liter.The pump's internal relay feature can repeat the incomingmeter signal to another Stennicator, controller or other device.Additional features include an on/off switch, prime and astandby setting.

Not a Traditional Medicator for Livestock Water

The Stennicator, Stenner's peristaltic medicator, is not atypical 1:128 water driven proportional pump. The pumpinjects directly in to the water line eliminating a water bypassthat can restrict water flow to the drinker lines. Poor waterquality, scale and solids are not harmful to the pump. TheStennicator is compact with a small footprint and can adaptto an existing pulse water meter. If utilizing a house controller,the pump's internal relay feature allows the water meter tosend the signal to the controller to register the waterconsumption. The pump can accurately inject or be placed instandby, without interrupting the water meter signal.

WATCH ANIMATED VIDEO of the Stennicator on

a poultry farm www.stenner.com

ECON STENNICATOR1:128 Medicator

Internal Relay

Stennicator Meter System or Tank System

For convenient and quick installations or turnkey operations, theStennicator Meter System is equipped with the pump and correspondingdry contact 3/4" or 1" water meter mounted on a heavy duty panel.

The pre-packaged tank system is equipped with the pump mounted to a7.5, 15 or 30 gallon capacity tank. Select UV Gray for outdoor installationsor translucent white.

Features


• Effortless tube replacement without tools

• Activate multiple pumps from one meter

• No water restriction or pressure loss

• On/off switch

• Brushless motor

• Enclosed housing

• cULus for indoor/outdoor use

ECON STENNICATOR

PumpShipping Weight 4 lbs (1.8 kg)Box Dimensions 8 x 7 x 10 in. (20 x 18 x 25 cm)Product Dimensions

5.9"

5.4"3.7"4.4"

Meter System Panel METER SYSTEM SHIPPING WEIGHT BOX DIMENSIONS

Single 17 lbs (7.7 kg)

Dual 20 lbs (9.1 kg)

18 www.stenner.com

SpecificationsFlow Rate Output ControlOn/off switch, fixed outputReproducibility ±2%Maximum Working Pressure 80 psi (5.5 bar)Maximum Operating Temperature 104°F (40°C)Maximum Suction Lift25 ft (7.6 m) vertical lift, based on waterMotor Type 24VDC, brushlessShaft rpm 60Duty Cycle ContinuousMax Viscosity 50 CentipoiseMotor Voltage (Amp Draw) 120V 60Hz (0.17)External Power Supply 100-120VAC, 60Hz Power Cord Type STP-2WPower Cord Length 10 ft (3.05 m)Power Cord Plug EndWall adapter power supply 100-120V, 60Hz, 0.75A input, two prong, polarized 24VDC, 1.25A, Class II outputClassification Indoor/Outdoor

Materials of ConstructionAll Housings Polycarbonate Pump Tube & Check Valve DuckbillSantoprene®*, FDA approvedPump Head Rollers PolyethyleneSuction/Discharge Tubing, FerrulesPolyethylene, FDA approvedTube Fittings Polypropylene, NSF listedCheck Valve FittingsType 1 Rigid PVC, NSF listedConnecting Nuts PP or Type 1 Rigid PVCSuction Line Strainer PP or Type 1 Rigid PVCbody with Type 1 Rigid PVC cap, NSF listed;ceramic weightAll Fasteners Stainless steel

Agency Listings




3 Ferrules 1/4"

1 Injection check valve


1 20' Roll suction/discharge tubing 1/4" white


1 Manual


24 x 23 x 12 in. (61 x 58 x 30 cm)

SystemS SingleD Dual

Tank SystemS7G 7.5-Gallon UV GrayS7N 7.5-Gallon WhiteS1G 15-Gallon UV GrayS1N 15-Gallon WhiteS3G 30-Gallon UV GrayS3N 30-Gallon WhiteTanks also sold separately on page 35.


NOTICE: The information within this chart is solely intended for use as a guide. The output data is an approximation based onpumping water under a controlled testing environment. Many variables can affect the output of the pump. Stenner PumpCompany recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs.

NOTE: Injection check valve included.


ECON STENNICATOR Flow Rate Output Chart 80 psi (5.5 bar) maximum Item Number Pump Tube Roller Ounces Milliliters Prefix Assembly per Minute per Minute

E20MH81S H Black 2.7 74.0


Item Number Builder

Omit if not orderingMeter System

SE 2 0 M H 8 1

Meter System Panel341 3/4" 1 pulse/gallon340 3/4" 10 pulses/gallon34L 3/4" 1 pulse/liter010 1" 10 pulses/gallon011 1" 1 pulse/gallon01L 1", 1 pulse/liter

1:128 MedicatorInternal Relay




Tank System and Meter System are two separate systems andare not sold as one.

Omit if not ordering Meter System

ECON INTEGRATOR™ SERIES

20 www.stenner.com

ECON INTEGRATOR™ Meter System

ECON INTEGRATOR™

Control Panel

Quick Facts

• 4.5, 16.0, 30.0 gpd, pressures to 80 psi

• Digital keypad with LCD display

• 10:1 turndown, 1% increments

• Flow activated with internal relay


Proportional Pump with Internal Relay Feature

The Econ Integrator™ is a flow activated pump featuringthree operational modes and an internal relay. The relayprovides a dry contact output signal replicating thesignal the pump receives. The signal output can controlanother device that accepts a dry contact signal such asanother Econ Integrator™. Multiple pumps can beactivated by one water meter. The relay is operable inthe Seconds or Flow Switch mode.

In livestock operations, the relay is especially usefulwhen an existing water meter is utilized to tally waterconsumption to a controller. The relay allows the meterto send a signal to the pump and to the controller;eliminating the need for another meter. The signal canbe sent if the pump is operating or in standby.

Econ Integrator™ Meter System or Tank System

For convenient and quick installations or turnkeyoperations, the Econ Integrator™ Meter System isequipped with the pump and corresponding dry contact3/4" or 1" water meter mounted on a heavy duty panel.

The pre-packaged tank system is equipped with thepump mounted to a 7.5, 15 or 30 gallon capacity tank. Select UV Gray for outdoor installations ortranslucent white.

Features





• Wall mountable

• Optional mounting accessories available


• NSF 61 & 372

Three Operating Modes

The control panel displays the operational modes: Seconds, Flow Switch or Auxiliary.

SECONDS: The pump can accept a dry (non-voltage) contact signal and willrun for a set time in response to receiving the signal. There are five pumpoperating time ranges; the maximum time is displayed on the control panel.The run time is adjustable from 10% to 100% in 1% increments.1 second = 0.1-1.0 5 seconds = 0.5-5.0 10 seconds = 1.0-10.020 seconds = 2.0-20.0 60 seconds = 6.0-60.0

FLOW SWITCH: The pump can accept a dry (non-voltage) contact signal froma 2 wire flow switch and will run at the set speed as long as it receives the drycontact. The pump speed is adjustable from 10% to 100% in 1% increments.

AUXILIARY: The pump can accept a 12-24 VAC/VDC signal from controlequipment that responds to flow and will run at a set speed for as long as it receives the signal. The pump speed is adjustable from 10% to 100% in1% increments. The internal relay does not work with a 12-24 VAC/VDC signal.

Flow ActivatedInternal Relay

ECON Tank System



5.9"

3.7" 5.4"

Meter SystemShipping Weight 17 lbs (7.7 kg)

Box Dimensions 24 x 23 x 12 in. (61 x 58 x 30 cm)






1 20' Roll suction/discharge tubing 1/4" white or UV blackOR 6 mm white EUROPE


1 Manual

SpecificationsFlow Rate Output ControlSix button control panel with LCD displayReproducibility ±2%Maximum Working Pressure 80 psi (5.5 bar)Maximum Operating Temperature 104°F (40°C)Maximum Suction Lift25 ft (7.6 m) vertical lift, based on waterMotor Type 24VDC, brushlessShaft rpm 60Duty Cycle ContinuousMotor Voltage (Amp Draw)120V 60Hz (0.17)External Power Supply100-120VAC, 60HzPower Cord Type STP-2WPower Cord Plug EndWall adapter power supply 100-120V, 60Hz 0.75A input,two prong, polarized 24VDC, 1.25A, Class II outputClassification Indoor/Outdoor

Materials of ConstructionAll Housings Polycarbonate Pump Tube & Check Valve Duckbill Santoprene®*,FDA approvedPump Head Rollers PolyethyleneSuction/Discharge Tubing, FerrulesPolyethylene, FDA approvedTube Fittings Polypropylene, NSF listedCheck Valve FittingsType 1 Rigid PVC, NSF listedConnecting Nuts PP or Type 1 Rigid PVCSuction Line Strainer PP or Type 1 Rigid PVC bodywith Type 1 Rigid PVC cap, NSF listed; ceramic weightAll Fasteners Stainless steel

Agency Listings



ECON INTEGRATOR™ SERIES

ECON INTEGRATOR™ - Flow Rate Output Chart 80 psi (5.5 bar) maximum Item Number Pump Tube Roller Turndown Gallons Gallons Ounces Ounces Liters Liters Milliliters Milliliters Prefix Assembly Ratio per Day per Hour per Hour per Minute per Day per Hour per Hour per Minute

E20RHF F White 10:1 4.5 0.19 24.0 0.40 17.01 0.71 708.8 11.8

E20RHG G Black 10:1 16.0 0.67 85.3 1.42 60.48 2.52 2520.0 42.0

E20RHH H Black 10:1 30.0 1.25 160.0 2.67 113.40 4.73 4725.0 78.8


NOTICE: The information within this chart is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testingenvironment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means ofanalytical testing to confirm their outputs.


22 www.stenner.com

Item Number Builder



Meter System Panel71 3/4" 1 pulse/gallon72 3/4" 2 pulses/gallon74 3/4" 4 pulses/gallon11 1" 1 pulse/gallon12 1" 2 pulses/gallon14 1" 4 pulses/gallon

Voltage & Hertz 7 120V 60Hz; 6' cord 8 120V 60 Hz; 10' cord


NOTE: Refer to thechemical resistance guidefor chemical compatibility.

Suction & Discharge Tubing1 1/4" White2 1/4" UV Black

Item Number Prefix SOmit if not orderingTank System




Tank System and Meter System are two separate systems and are not sold as one.

ECON FP SERIES

ECON FP Meter System

ECON FP

Features





• Solid one piece tube construction

• Wall mountable



• NSF 61 & 372

• CE listed, varies by model

Three Operating Modes

SECONDS: The pump can accept a dry (non-voltage) contact signal andwill run for a set time in response to receiving the signal. There are fivepump operating time ranges; the maximum time is displayed on the controlpanel. The run time is adjustable from 10% to 100% in 1% increments.1 second = 0.1-1.0 5 seconds = 0.5-5.0 10 seconds = 1.0-10.020 seconds = 2.0-20.0 60 seconds = 6.0-60.0

FLOW SWITCH: The pump can accept a dry (non-voltage) contact signalfrom a 2 wire flow switch and will run at the set speed as long as itreceives the dry contact. The pump speed is adjustable from 10% to 100%in 1% increments.

AUXILIARY: The pump can accept a 12-24 VAC/VDC signal from controlequipment that responds to flow and will run at a set speed for as long as it receives the signal. The pump speed is adjustable from 10% to 100%in 1% increments.

Control Panel

Quick Facts

• 4.5, 16.0, 30.0 gpd, pressures to 80 psi


• 10:1 turndown, 1% increments


Multi-Functional, Flow Activated

The Econ FP is flow activated and offers a choice of threeoperational modes all in one pump. The pump can accept adry contact signal or a 12-24 VAC/VDC signal from controlequipment that responds to flow. Based on the mode ofoperation selected, the pump runs at a set time or a setspeed in response to receiving a signal. The control paneldisplays one of three operating modes: Seconds, FlowSwitch or Auxiliary. The pump is designed for light dutyapplications such as drinking water disinfection or pHadjustment for private water wells in homes or farms.

Econ FP Meter System or Tank System

For convenient and quick installations or turnkeyoperations, the Econ FP Meter System is equipped with thepump and corresponding dry contact 3/4" or 1" watermeter mounted on a heavy duty panel.

The pre-packaged tank system is equipped with the pumpmounted to a 7.5, 15 or 30 gallon capacity tank. Select UVGray for outdoor installations or translucent white.


Flow ActivatedThree Operating Modes

ECON Tank System

SpecificationsFlow Rate Output ControlSix button control panel with LCD displayReproducibility ±2%Maximum Working Pressure 80 psi (5.5 bar)Maximum Operating Temperature 104°F (40°C)Maximum Suction Lift25 ft (7.6 m) vertical lift, based on waterMotor Type 24VDC, brushlessShaft rpm 60Duty Cycle ContinuousMotor Voltage (Amp Draw) 120V 60Hz (0.17)Motor Voltage (Watts) 240V 50Hz (10)External Power Supply 100-120V, 60HzPower Cord Type STP-2WPower Cord Length6 ft (1.83 m)10 ft (3.05 m)Power Cord Plug EndWall adapter power supply 100-120V, 60Hz, 0.75A input, two prong, polarized 24VDC, 1.25A, Class II outputClassification Indoor/Outdoor

Materials of ConstructionAll Housings Polycarbonate Pump Tube & Check Valve DuckbillSantoprene®*, FDA approvedPump Head Rollers PolyethyleneSuction/Discharge Tubing, FerrulesPolyethylene, FDA approvedTube Fittings Polypropylene, NSF listedCheck Valve FittingsType 1 Rigid PVC, NSF listedConnecting Nuts PP or Type 1 Rigid PVCSuction Line Strainer PP or Type 1 Rigid PVCbody with Type 1 Rigid PVC cap, NSF listed;ceramic weightAll Fasteners Stainless steel

Agency Listings



5.9"

3.7" 5.4"

Meter SystemShipping Weight 17 lbs (7.7 kg)

Box Dimensions 24 x 23 x 12 in. (61 x 58 x 30 cm)

24 www.stenner.com






1 20' Roll suction/discharge tubing 1/4" white or UV black OR 6 mm white EUROPE


1 Manual


ECON FP SERIES


NOTICE: The information within this chart is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testingenvironment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means ofanalytical testing to confirm their outputs.


ECON FP - Flow Rate Output Chart 80 psi (5.5 bar) maximum Item Number Pump Tube Roller Turndown Gallons Gallons Ounces Ounces Liters Liters Milliliters Milliliters Prefix Assembly Ratio per Day per Hour per Hour per Minute per Day per Hour per Hour per Minute

E20PHF F White 10:1 4.5 0.19 24.0 0.40 17.01 0.71 708.8 11.8

E20PHG G Black 10:1 16.0 0.67 85.3 1.42 60.48 2.52 2520.0 42.0

E20PHH H Black 10:1 30.0 1.25 160.0 2.67 113.40 4.73 4725.0 78.8


Item Number Builder



Meter System Panel*

71 3/4" 1 pulse/gallon72 3/4" 2 pulses/gallon74 3/4" 4 pulses/gallon11 1" 1 pulse/gallon12 1" 2 pulses/gallon14 1" 4 pulses/gallon

Voltage & Hertz 7 120V 60Hz; 6' cord 8 120V 60Hz; 10' cord 9 240V 50Hz; 6' cord, CE plug



Suction & Discharge Tubing1 1/4" White2 1/4" UV Black5 6 mm White EUROPE



Flow ActivatedThree Operating Modes




Tank System and Meter System are two separate systems and are not sold as one.

26 www.stenner.com

ECON T SERIES

How It Works

The Econ T has 24 independent programmable on and off events within a 7 day period. Each event can be programmed for a specific On time andspecific Off time for each selected day or days of the week. Each timer can beset in hour and minute increments. The programmable clock uses a 24 hourformat. A battery is included as a back-up to power loss, to maintain theinternal time and programmed event settings. When the pump is operating,the screen displays the current day, time of day, and the mode of operation.

Features





• Wall mountable



• NSF 61 & 372

• NSF 50 (25 psi models only)


ECON T

Control Panel

Quick Facts

• 2.5-15.0 gpd, pressures to 25 psi

• 0.6-21.7 gpd, pressures to 80 psi


• Adjustable run time per event


Automatic Dosing Control for Timed Applications

The Econ T provides automatic injection and offersflexibility with the dosing schedule for a variety oftimed applications. The pump has a 24 hour / 7 dayintegral timer and is programmed with the digitalcontrol pad. The control pad has display indicators forthe days of the week, the operating mode and thetimers (events). The pump is programmed with theDay, Hour, Minute, Clock, Manual and Timer buttonson the control pad.

Some examples of applications are enzyme injectionfor drain line maintenance and biocide feed for smallcooling towers or water fountains. For installationconvenience, the Econ T is available as a TankSystem, shipped from the factory with the pump pre-mounted to the tank.

Programmable Timer24 Hour / 7 Day

ECON Tank System


SpecificationsFlow Rate Output Control24-hr programmable clock; 7 day, 24 event timerReproducibility ±5% Maximum Working Pressure80 psi (5.5 bar) and 25 psi (1.7 bar)Maximum Operating Temperature 104°F (40°C)Maximum Suction Lift25 ft (7.6 m) vertical lift, based on waterMotor Type 24VDC, brushedShaft rpm 9, 18 or 40Duty Cycle ContinuousMotor Voltage (Amp Draw) 120V 60Hz (0.17)Motor Voltage (Watts) 240V 50Hz (10)External Power Supply100-120V, 60HzPower Cord Type STP-2WPower Cord Plug EndWall adapter power supply 100-120V, 60Hz, 0.75Ainput, two prong, polarized 24VDC, 1.25A, Class II outputClassification Indoor/Outdoor

Materials of ConstructionAll Housings Polycarbonate Pump Tube & Check Valve DuckbillSantoprene®*, FDA approvedPump Head Rollers PolyethyleneSuction/Discharge Tubing, FerrulesPolyethylene, FDA approvedTube Fittings Polypropylene, NSF listedCheck Valve FittingsType 1 Rigid PVC, NSF listedConnecting Nuts PP or Type 1 Rigid PVCSuction Line Strainer PP or Type 1 Rigid PVC bodywith Type 1 Rigid PVC cap, NSF listed; ceramic weightAll Fasteners Stainless steel

Agency Listings25 psi models tested and certified by Intertek to Standard ANSI/NSF 50, Equipment for Swimming Pools, Spas, Hot Tubs, and Other Recreational Water Facilities.

Listings vary by model


5.9"

5.4"3.7"4.4"






1 Injection check valve 80 psi (5.5 bar)OR 1 injection fitting 25 psi (1.7 bar)


1 20' Roll suction/discharge tubing 1/4" white or UV blackOR 6 mm white EUROPE


1 Manual


28 www.stenner.com

NOTICE: The information within these charts is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testingenvironment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means ofanalytical testing to confirm their outputs.

NOTE: Injection check valve included with pumps rated 80 psi (5.5 bar).

ECON T - Flow Rate Output Chart 25 psi (1.7 bar) maximum Item Number Pump Roller Gallons Gallons Ounces Ounces Pressure Liters Liters Milliliters Milliliters Pressure Prefix Tube Assembly per Day per Hour per Hour per Minute psi per Day per Hour per Hour per Minute bar

E10T1A A White 2.5 0.10 13.2 0.22 25 9.5 0.39 396.0 6.60 1.7

E10T2A A White 5.0 0.21 26.4 0.44 25 18.9 0.79 786.0 13.10 1.7

E10T2B B White 8.5 0.35 45.6 0.76 25 32.2 1.34 1338.0 22.30 1.7

E10T2C C White 15.0 0.63 79.8 1.33 25 56.8 2.37 2364.0 39.40 1.7



ECON T - Flow Rate Output Chart 80 psi (5.5 bar) maximum Item Number Pump Roller Gallons Gallons Ounces Ounces Pressure Liters Liters Milliliters Milliliters Pressure Prefix Tube Assembly per Day per Hour per Hour per Minute psi per Day per Hour per Hour per Minute bar

E10T1F F White 0.6 0.02 3.0 0.05 80 2.2 0.09 90.0 1.50 5.5

E10T2F F White 1.3 0.05 6.6 0.11 80 4.8 0.20 198.0 3.30 5.5

E20T4F F White 3.4 0.14 18.0 0.30 80 13.1 0.54 544.8 9.08 5.5

E20T4G G Black 12.3 0.51 65.4 1.09 80 46.5 1.94 1937.4 32.29 5.5

E20T4H H Black 21.7 0.90 115.2 1.92 80 82.0 3.41 3416.4 56.94 5.5

ECON T SERIES

Item Number Builder


Voltage & Hertz 7 120V 60Hz; 6' cord 8 120V 60Hz; 10' cord 9 240V 50Hz; 6' cord, CE plug



Suction & Discharge Tubing1 1/4" White2 1/4" UV Black5 6 mm White EUROPE



How to build an Item Number1. Refer to above Flow Rate Output Chart

to select a pump.




ECON OEM PUMPS

OEM

Stenner’s custom OEM pump can be designed with thecustomer’s supplied motor and gearbox. A standard OEMbracket is provided, or a custom bracket can be designed. Thepump is offered with a brushless or brushed DC motor, and asan open or enclosed version.

Enclosed versions offer an optional internal power supply andcustomizable power cord for 100-240VAC, 50/60Hz. Thecustomer selects the fixed output from ranges of 0.04 ouncesper hour to 2.08 gallons per hour, up to 80 psi (1.3 millilitersper hour to 7.88 liters per hour, up to 5.5 bar).

OEM BATCH

On/Off Switch

The custom OEM batch pump is factory programmed to run aspecific length of time when manually activated by an integralswitch or can be designed to activate with an input signal. Thecustomer selects the pump run time from 0.1 seconds to 24hours per activations.

The pre-set fluid volume choices are up to 50 gallons per day,up to 80 psi (189.3 liters per day, up to 5.5 bar). The pump issupplied with a 24VDC brushless motor and a customizablepower cord for 100-240VAC, 50/60Hz. The pump can also besupplied without an internal power supply.

5.9"

Features


• Anti-siphon 3 point roller design

• Indoor/Outdoor

• Select custom color

• Optional tube materials

• Dual bearing support output shaft

• Serviceable liquid end, gear train & motor

• Agency approvals available

• Voltage options

5.2"3.7"4.4"

Shipping Weight 4 lbs (1.8kg)Box Dimensions 8 x 7 x 10 in. (20 x 18 x 25 cm)Product Dimensions


Stock or Custom

ECON LD SERIES

30 www.stenner.com

ECON LD

Potentiometer



3 Ferrules 1/4"



1 20' Roll suction/discharge tubing 1/4" white


1 Manual

Quick Facts

• 0.04-8.1 oz/hr, pressures to 80 psi

• Adjustable potentiometer

• 50:1 turndown

Accurate Low Volume Metering

The Econ LD is a precise, compact variable speedperistaltic pump designed for metering low volumeswhen reliability and accuracy are a must. Ideal forpumping flocculants, coagulants, sanitizers, and avariety of solutions. The quiet, long lasting brushlessmotor, in a totally enclosed housing, offers premiumquality in a compact pump.

The design incorporates the latest microprocessortechnology with a simple potentiometer control andon/off switch. The potentiometer has a 50:1 turndownoffering a wide range of outputs. Adjusting thepotentiometer clockwise gradually increases thepump speed to 100%. Turning the potentiometer fullycounter-clockwise turns the pump off.

Features




• Brushless motor



• Tank System ships with pump pre-mounted to the tank.



ECON Tank System

SpecificationsFlow Rate Output Control Potentiometer, 50:1 TurndownReproducibility ±2%Maximum Working Pressure 80 psi (5.5 bar)Maximum Operating Temperature 104°F (40°C)Maximum Suction Lift 25 ft (7.6 m) vertical lift, based onwaterMotor Type 24VDC, brushlessShaft rpm 17Duty Cycle ContinuousMax Viscosity 50 CentipoiseMotor Voltage (Amp Draw) 120V 60Hz, 230V 50Hz (0.17)Power Cord Type SJTOW for NEMA plugs, H05VV-F for CEPower Cord Length 6 ft (1.8 m)Power Cord Plug End NEMA, Swiss, CEClassification Indoor & outdoor

Materials of ConstructionAll Housings Polycarbonate Pump Tube & Check Valve Duckbill Santoprene®*, FDA approvedPump Head Rollers PolyethyleneSuction/Discharge Tubing, Ferrules Polyethylene, FDA approvedTube Fittings Polypropylene, NSF listedCheck Valve Fittings Type 1 Rigid PVC, NSF listedConnecting Nuts PP or Type 1 Rigid PVCSuction Line Strainer PP or Type 1 Rigid PVC body with Type 1 RigidPVC cap, NSF listed; ceramic weightAll Fasteners Stainless steel

Agency Listings


Shipping Weight 4 lbs (1.8kg)Box Dimensions 8 x 7 x 10 in. (20 x 18 x 25 cm)Product Dimensions

5.9"

5.2"3.7"4.4"

ECON LD - Flow Rate Output Chart 80 psi (5.5 bar) maximum Item Number Pump Tube Roller Turndown Ounces Milliliters Prefix Assembly Ratio per Hour per Hour

E10LHM M White 50:1 0.04 to 2.4 1.3 to 70.0

E10LHF F White 50:1 0.11 to 8.1 3.2 to 240.0

NOTICE: The information within this chart is solely intended for use as aguide. The output data is an approximation based on pumping waterunder a controlled testing environment. Many variables can affect theoutput of the pump. Stenner Pump Company recommends that allmetering pumps undergo field calibration by means of analytical testingto confirm their outputs.


Approximate MaximumOutput @ 50/60Hz



Item Number Builder


Voltage & Hertz A 120V 60Hz C 230V 50Hz



Suction & Discharge Tubing1 1/4" White5 6 mm White EUROPE



How to build an Item Number1. Refer to above Flow Rate Output Chart

to select a pump.



Variable SpeedLow Volume

32 www.stenner.com

PROPORTIONAL INJECTION SYSTEM

Proportional Injection Systems - Single and Dual

Proportional Metering in a Pre-Packaged System

The Proportional Injection System doses solution thatis proportional to the system’s flow rate based onwater volume. The water meter sends a signal to thePCM which actuates the pump. Components are pre-mounted to a heavy duty panel for quick installationand convenient equipment accessibility.

The system is suited for constant pressure (variablespeed) well pumps, poultry and livestock houses,irrigation, systems with demand based backup wellsand any application with varying flow rates.

Components

1� Classic single head fixed output pump

2� PCM

3 Plastic 3/4" dry contact water meter, certified by WQA to ANSI/NSF 372, low lead

4 Flow Indicator to confirm pump is operating

5� Filter with 30 and 100 mesh screens

6� Unions for easy installation and removal

7 Cabinet keeps cords and wires contained

8 Heavy duty panel and wall mounting bracket

1

6

4

5

7

2

3

8



Shipping Weight• Single: 29 lbs (13.2 kg)• Dual: 42 lbs (19.0 kg)

Box Dimensions• Single: 36 x 23 x 12 in. (91 x 58 x 30 cm)• Dual: 43 x 27 x 12 in. (109 x 69 x 30 cm)

Item Number Builder

Pump & PCM Voltage 1 120V 60Hz

PCM Operating Range Model (sec.)

01 0.1 to 1.0 PCM105 0.5 to 5.0 PCM510 1.0 to 10.0 PCM1020 2.0 to 20.0 PCM20

SystemS SingleD Dual

Classic Single Head Fixed Pump gpd lpd Model

03 3 11.4 45MPHP205 5 18.9 85MPHP510 10 37.9 45MPHP1017 17 64.4 85MPHP1722 22 83.3 45MPHP2240 40 151.4 85MPHP40

Water Meter and PCM Activated

Plastic Water Meter341P 3/4" 1 pulse/gallon342P 3/4" 2 pulses/gallon344P 3/4" 4 pulses/gallon

1

SpecificationsFlow Rate Output Control Water meter and PCM Voltage 120V 60Hz

Materials of ConstructionPanel & Panel Fittings PolyethyleneMounting Hardware Stainless steelPiping and Associated Fittings PVCWater Meter Plastic lead free (certified with WQA/ANSI-372)Filter PVC with polycarbonate cover and two polyesterscreens 30 and 100 meshNOTE: PVC connections are socket weld union 3/4" connections. Two 1"to 3/4" reducer couplings are included in the accessory kit to allow unitto adapt to 1" piping systems.

Shipping Weight and Box Dimensions

Shipping Weight Tank Size Classic Adjustable

Classic Fixed Econ Box Dimensions

or M128

7.5-Gallon 24 lbs (10.9 kg) 23 lbs (10.4 kg) 19 lbs (8.6 kg) 23 x 23 x 20 in. (58 x 58 x 51 cm)

15-Gallon 27 lbs (12.3 kg) 26 lbs (11.8 kg) 22 lbs (10.0 kg) 23 x 23 x 26 in. (58 x 58 x 66 cm)

30-Gallon 33 lbs. (15.4 kg) 32 lbs (14.5 kg) 28 lbs (12.7 kg) 23 x 23 x 38 in. (58 x 58 x 97 cm)

TANK SYSTEM

34 www.stenner.com

Materials of ConstructionTank PolyethyleneLid with child resistant lock PolypropyleneGrommets VitonScrews Stainless steel

Agency Listings

7.5-Gallon (28.4 Liters)

15-Gallon (56.8 Liters)

30-Gallon (113.6 Liters)Rain Roof

Vertical mount overcontainment basin

Child Resistant Lid

Level Indicators

Tank system shown with ClassicSeries single head adjustable pump

How It Works

The Tank System consists of a tank and pump. The system is factory assembledwith your pump choice: Classic single head adjustable or fixed, M128 or Econ andyour tank choice: 7.5, 15, 30 gallon, in white or UV resistant gray.

Features

• Includes rain roof to help protect motor (Classic series only)

• Pump is vertically mounted for solution containment

• Child resistant lid

• Polyethylene construction is lightweight and rugged

Weight and Dimensions

NOTE: Build a tank system item number on pages 4, 5, 16, 19, 22, 25, 28, 31.

Product Dimensions

• 7.5-Gallon: 20.5 OD x 19.6 in. (52.1 OD x 49.8 cm)

• 15-Gallon: 20.5 OD x 25.3 in. (52.1 OD x 64.1 cm)


Pump and TankPre-packaged System


Materials of ConstructionTank PolyethyleneLid with child resistant lock PolypropyleneGrommets VitonScrews Stainless steel

Agency Listings

7.5-Gallon (28.4 Liters)



Tank Size Shipping Weight Box Dimension

7.5-Gallon 15 lbs (6.8 kg) 23 x 23 x 20 in. (58 x 58 x 51 cm)

15-Gallon 18 lbs. (8.2 kg) 23 x 23 x 26 in. (58 x 58 x 66 cm)

30-Gallon 24 lbs (10.9 kg) 23 x 23 x 38 in. (58 x 58 x 97 cm)

Quick Facts

• UV resistant gray or translucent white

• 7.5, 15 or 30 gallon

• Child resistant lid

• Polyethylene construction

• Lightweight


Shipping Weight and Box Dimensions

Product Dimensions

• 7.5-Gallon: 20.5 OD x 19.6 in. (52.1 OD x 49.9 cm)



TANKS7.5. 15, 30 Gallon

UV GrayTranslucent White

Tanks Includes screws and grommets

ITEM NUMBER UM DESCRIPTION Works with

STS7GC EA 7.5-Gallon Gray

STS7NC EA 7.5-Gallon White

STS15GC EA 15-Gallon Gray

STS15NC EA 15-Gallon White

STS30GC EA 30-Gallon Gray

STS30NC EA 30-Gallon White

* Econ Mounting Kit EC303 required and sold separately on page 52.

Tanks Includes screws, grommets and pump mounting kit

ITEM NUMBER UM DESCRIPTION Works with

STS7G-02 EA 7.5-Gallon Gray SVP Series only

STS7N-02 EA 7.5-Gallon White

STS15G-02 EA 15-Gallon Gray

STS15N-02 EA 15-Gallon White

STS30G-02 EA 30-Gallon Gray

STS30N-02 EA 30-Gallon White

Classic 45 & 85 /M128 / All Econ Pumps

MIXER

36 www.stenner.com

7.5-Gallon

15-Gallon

30-Gallon

SpecificationsMaximum Operating Temperature125°F (52°C)Motor Type 1/30 HP, shaded pole, class B Motor rpm Approximately 3600Duty Cycle ContinuousMotor Voltage (Amp Draw)120V 60Hz 1PH (1.7)220V 60Hz 1PH (0.9)Power Cord Type SJTOWPower Cord Plug End120V 60Hz NEMA 5/15220V 60Hz NEMA 6/15

Materials of ConstructionMotor Housing Polycarbonate Wetted Parts Nylon, Fiberglass,Santoprene®*, PE, PVC, NSF approved or FDAcompliant HastelloyAll Fasteners Stainless steel

How It Works

The Mixer is utilized in applications for injecting solutions difficult to keep insuspension. It has been designed to retro-fit existing Stenner tank systems andtanks and modifications are not required. The mixer is intended for intermittent use applications and is available in 7.5, 15 and 30 gallon and 120V or 220V.

Features

The Mixer’s design creates a rapid flow in a circular path. The speed and constantmovement delivers high volume output for constant mixing to help keep thechemical in solution and prevent it from settling out around the outer edges of thesolution tank.

The mixing head is sealed to keep it from getting entangled with the suction line.The sealed design eliminates the need for a suction line guard.

The mixer is easily installed by placing the unit in the solution tank opening, then,attaching the safety screws with a Phillips head screwdriver and plugging it in.


Shipping Weight• 7.5-Gallon: 6.6 lbs (3.0 kg) • 15-Gallon: 7.4 lbs (3.4 kg)• 30-Gallon: 9.4 lbs (4.3 kg)

Box Dimensions• 7.5-Gallon: 16 x 10 x 10 in. (40.6 x 25.4 x 25.4 cm)• 15-Gallon: 22 x 10 x 10 in. (55.9 x 25.4 x 25.4 cm) • 30-Gallon: 33 x 10 x 10 in. (83.8 x 25.4 x 25.4 cm)

Designed for Stenner Tanks

Mixer Models ITEM NUMBER UM DESCRIPTION

SMS75A EA 7.5-Gallon, 120V 60Hz

SMS75B EA 7.5-Gallon, 220V 60Hz

SMS15A EA 15-Gallon, 120V 60Hz

SMS15B EA 15-Gallon, 220V 60Hz

SMS30A EA 30-Gallon, 120V 60Hz

SMS30B EA 30-Gallon, 220V 60Hz


SpecificationsSwitching Function Contact closes at increasingflow, opens at decreasing flowPressure Rating Maximum 145 psi*

Medium Temperature Maximum +212°F* (+100°C)Ambient Temperature Maximum+158°F* (+70°C)Protection Class IP 65Switching Current Maximum 1ASwitching Voltage Maximum 230VAC, 48VDCSwitching Capacity Maximum 26VA, 20W

Materials of ConstructionBody/Paddle System PPO Noryl GFN3AdapterPVC: Glue-in, Copper: Brass, solderingGasket EPDMMagnet Hard FerriteCable PVC

Agency Listings• cETLus Component Recognized• UL 508• UL 353• CSA C22.2#14-05• Water Regulations Advisory Scheme

* Values for flow switch, observe maximum values of PVC slip fit tee or maximum values of copper pipe.

PVC Flow Switch

Copper Flow Switch

FLOW SWITCH

How It Works

In residential or light commercial applications, water treatment professionals canuse a metering pump activated by a flow switch for applications such asdisinfection, oxidation or pH adjustment. Stenner offers a dry contact, two wireflow switch for a PVC tee or copper pipe. Both are a paddle style with glass fiberreinforced plastic construction. The design uses a magnetic force to reset thepaddle to eliminate spring fatigue. Stenner's Econ FP or Econ Integrator™ pumpsare designed to interface with a two wire flow switch that accepts a dry contact.

Features

The flow switch for PVC includes a glue-in adapter for easy mounting to a standardPVC slip fit tee. The flow switch for copper has an adapter for soldering to copperpipe. The nominal activation points are based on installation into a Spears 3/4"or 1" schedule 80 PVC tee or an industry standard, smooth 3/4" or 1" copperpipe. The activation points are 1.2 gallons per minute for 3/4" and 1.9 gallonsper minute for the 1" flow switch. A wiring harness is included with the Econ FPand the Econ Integrator™ for an easy connection to the dry contact flow switch.

Two WireDry Contact

Flow Switch ITEM NUMBER UM DESCRIPTION

EC500 EA 3/4" for PVC pipe

EC501 EA 1" for PVC pipe

EC50C EA 3/4" for copper pipe

EC51C EA 1" for copper pipe

38 www.stenner.com

Water Meter

Classic SeriesFixed Output Pump

PCM

PCM

PCM

How It Works

The PCM is a time adjustable controller utilized with Stenner's fixed output pumpand a pulsing dry contact water meter for applications requiring proportionalinjection. The water meter sends a signal to the PCM and the PCM actuates thepump to deliver the desired dose based upon water volume. The PCM is acomponent in Stenner's Proportional Injection System.

Customize Your Own Proportional Feed Installation

Individually select a PCM, a Classic Series single head fixed output pump andwater meter. The components are sold separately.

Features

• Chemical resistant ABS plastic housing

• On-time duration set with knob adjustment with locking feature

• 10' power cord and jacketed signal input cable

Materials of ConstructionHousings PolycarbonateTimer Microcontroller with triac outputTurndown Ratio 10:1Input Signal Non-voltage dry contact, water meterReset Time ImmediateMinimum Signal Durations 10 millisecondsInput Electrical 120V 60HzNo Load Current 0.45mA AC maximumOutput ElectricalMaximum device load, 1.8 amp at 120V

Agency Listings

Potentiometer

Proportional Injection System

PCM

3.6"

5.8"

1.8"

3.6"

5.4"

PCM ModelsITEM NUMBER UM DESCRIPTION

PCM1 EA 0.1 to 1.0 Second

PCM5 EA 0.5 to 5.0 Seconds




Shipping Weight 2 lbs (0.9 kg)Box Dimensions 9 x 8 x 7 in. (23 x 20 x 18 cm)

The PCM’s operating range can be converted by changing the position of thejumpers on the circuit board so another model doesn’t have to be purchased.


1.8"

Time Adjustable Controller

Location ofthe jumpers

Jumpers

Pins

Plastic Water Meter

40 www.stenner.com

SpecificationsAccuracy ±2% when operating betweenminimum and maximum flow rangeTemperature Range 35-122°F (1.7-50°C)Pressure Ratings 15-100 psi (1.0-6.9 bar)Maximum Current 20mAMaximum Voltage 24VDC or 24VACSensor Reed SwitchCable Length 6 ft (1.8 m)

Materials of ConstructionBody** Engineered reinforced plastic (nylon)Internal Engineered thermoplasticMagnet Alnico

** 1 1/2 " meter may include plastic or lead free brass couplings.

Flow Rates*

Size Flow Rate gpm Pulses Per Gallon

3/4" 0.25 to 22 1 2 4 10

1" 0.75 to 50 1 2 4 10

1 1/2" 2.0 to 100 1 2 4 n/a

* Continuous Flow: The meter size should be selected based upon continuous flow, gpm, as opposed to pipe size.

WATER METER

IPS ThreadNPT Thread

Body

Body with Couplings

SIZE SHIPPING BODY BODY WITH IPS NPT WEIGHT COUPLINGS THREAD THREAD

3/4" 2 lbs (1.0 kg) 7.5" (19.1 cm) 11.5" (29.2 cm) 1" 0.75"

1" 3 lbs (1.4 kg) 10.25" (26.0 cm) 15.25" (38.7 cm) 1.25" 1"

1 1/2" 6 lbs (2.7 kg) 9.63" (24.4 cm) 14.75" (37.5 cm) 2" 1 1/2"

How It Works

The plastic water meter doesn’t require power and utilizes a reed switch toprovide a pulsing dry contact signal. The meter is certified by WQA to ANSI/NSF372, low lead.

The 3/4" or 1" meter is included with the Econ or M128 Meter Systems. The 3/4"is included with the Proportional Injection System. Purchase componentsindividually to assemble your own system.


PlasticDry Contact

Plastic Meters

ITEM NUMBER UM SIZE PPG

JLP0750-1PPG EA 3/4" 1 pulse/gallon

JLP0750-2PPG EA 2 pulses/gallon


JLP0750-10PPG 10 pulses/gallon

JLP1000-1PPG EA 1" 1 pulse/gallon



JLP1500-1PPG EA 1.5" 1 pulse/gallon



Stainless Steel Water Meter

IPS ThreadNPT Thread

Body

Body with Couplings

WATER METER

Flow RatesContinuous Flow* 80 gallons per minuteFlow Range 1-160 gallons per minutePulses per Gallon 1, 2, 4* The size of the meter should be based upon continuous flowand gallons per minute as opposed to pipe size.

SpecificationsAccuracy ±1.5% of maximum flow whenoperating between minimum and maximum flow rangeMaximum Operating Pressure 150 psi (10.3 bar)pH Level Range 6.5-8.0Temperature Range 35-122°F (1.7-50°C)Protect the meter from freezingMaximum Current 20mAMaximum Voltage 24VDC or 24VACSensor Reed switch, dry contact type, normally openCable Length 6 ft (1.8 m)Register US gallons

Materials of ConstructionBody Stainless steelInternal Engineered thermoplasticMagnet Alnico


How It Works

The stainless steel water meter doesn’t require power and utilizes a reed switchto provide a pulsing dry contact signal. The meter is certified by WQA to ANSI/NSF 372, low lead.

The meter is sold separately for selecting products individually for a proportionalfeed installation.


Shipping Weight 12 lbs (5.4 kg)

DimensionsBody: 11.9 in. (30.1 cm)Body with Couplings: 17.5 in. (44.5 cm)IPS Thread: 2.5 in. (6.4 cm)NPT Thread: 2.0 in. (5.1 cm)

Stainless SteelDry Contact

Stainless Steel Meters


SSMRS20-1PPG EA 2" 1 pulse/gallon

SSMRS20-2PPG EA 2" 2 pulses/gallon

SSMRS20-4PPG EA 2" 4 pulses/gallon

NOTE: Two week lead time for non-stocked meters. Contact factory to confirm availability.

VPD Water Meter

42 www.stenner.com

WATER METER

How It Works

The vertical positive displacement, oscillating piston, water meter doesn’t requirepower and utilizes a reed switch to provide a pulsing dry contact signal. Althoughdesigned for vertical installation, the meter can be installed horizontally or on anincline, provided the meter remains full of water. The meter has a built-in backflow preventer and is housed in an engineered plastic with corrosion resistantliquid-sealed register for easy reading.


Shipping Weight 1.8 lbs (0.80 kg)

DimensionsBody: 6.5 in. (16.51 cm)Body with Couplings: 10.5 in. (26.67 cm)IPS Thread: 1.0 in. (2.54 cm)NPT Thread: 0.75 in. (1.9 cm)

VPD Meters


VPD0750-1PPG EA 3/4" 1 pulse/gallon

VPD0750-1PPL 1 pulse/liter

NOTE: Two week lead time for non-stocked meters. Contact factory to confirm availability.

Flow RatesContinuous Flow* 16 gallons per minuteFlow Range 0.1-22 gallons per minute* The size of the meter should be based upon continuous flow

and gallons per minute as opposed to pipe size.

SpecificationsAccuracy ±2% of maximum flow whenoperating between minimum and maximum flow rangeMaximum Operating Pressure 150 psi (10.3 bar)Temperature Range 35-122°F (1.7-50°C)Protect the meter from freezingMaximum Current 20mAMaximum Voltage 24VDC or 24VACSensor Reed switch, dry contact type, normally openCable Length 6 ft (1.8 m)Register US gallons or liters

Materials of ConstructionBody Engineered reinforced plastic (nylon)Internal Engineered thermoplastic

Vertical Positive Displacement

PUMP TUBES

QuickPro® PUMP LINE - Pump TubeIncludes ferrules 1/4" (EUROPE 6 mm)

PART NUMBER UM DESCRIPTION Works with

UCCP20■ 2-PK Santoprene®* tube Classic / SVP / S / MCCP20■ 5-PK select # 1, 2, 3, 4 or 5 for ■ M128 M05 #5 tube only

UCCP207 2-PK Santoprene®* #7 tube Classic 45 & 85 only / SVP / S / MCCP207 5-PK M128 M07 only

UCTYG0■ 2-PK Versilon™* tube Classic / SVP / SMCTYG0■ 5-PK select # 1, 2, 3, 4 or 5 for ■

UCCP2■CE 2-PK Santoprene®* tube Classic / SVP / SMCCP2■CE 5-PK select # 1, 2, 3, 4 or 5 for ■UCCP27CE 2-PK Santoprene®* #7 tube Classic 45 & 85 only / SVP / SMCCP27CE 5-PK UCTY■CE 2-PK Versilon™* tube Classic / SVP / SMCTY■CE 5-PK select # 1, 2, 3, 4 or 5 for ■

EURO

PE

* Confirm material compatibility with the chemical resistance guide in the catalog. Santoprene® is beige; Versilon™ and Pellathane® are clear; the FKM duckbill is black.


QuickPro® PUMP LINEECON PUMP LINE

ECON PUMP LINE - Pump Tube


EC30A-2 2-PK Pump Tube A, Ferrules 1/4" Econ T

EC30B-2 2-PK Pump Tube B, Ferrules 1/4" Econ T

EC30C-2 2-PK Pump Tube C, Ferrules 1/4 Econ T

EC30F-2 2-PK Pump Tube F, Ferrules 1/4" Econ: FP, Integrator™, LD, T

EC30G-2 2-PK Pump Tube G, Ferrules 1/4" Econ: FP, Integrator™, T

EC30H-2 2-PK Pump Tube H, Ferrules 1/4" Econ: FP, Integrator™, Stennicator, T

EC30M-2 2-PK Pump Tube M, Ferrules 1/4" Econ LD

Includes duckbills, ferrules 1/4" (EUROPE 6 mm)


UCCP■FD 2-PK Santoprene®* tube Classic / SVP / Sselect # 1 or 2 for ■

UCCP7FD 2-PK Santoprene®* #7 tube Classic 45 & 85 only / SVP / S / M128 M07 only

UCTY■FD 2-PK Versilon™* tube Classic / SVP / Sselect # 1 or 2 for ■

UC■FDCE 2-PK Santoprene®* tube Classic / SVP / Sselect # 1 or 2 for ■

UC7FDCE 2-PK Santoprene®* #7 tube Classic 45 & 85 only / SVP / S

UCTY■DCE 2-PK Versilon™* tube Classic / SVP / Sselect # 1 or 2 for ■

EURO

PE

Refer to the Flow Rate Output Charts to match thepump model with the correct tube.

Refer to the Flow Rate Output Charts to match thepump with the correct tube and roller assembly.

Quickpro® PUMP HEAD QuickPro® PUMP LINE

44 www.stenner.com

The Classic, SVP, M128 and S series are manufactured with the patentpending QuickPro® pump head. The QuickPro® contains a collapsible rollerassembly and the housing is attached by latches instead of screws.


QuickPro® Pump Head 0-25 psi (0-1.7 bar) Includes pump head, tube, ferrules 1/4" (EUROPE 6 mm)


QP25■-1 EA Select Santoprene®* tube Classic / SVPQP25■-2 2-PK # 1, 2, 3 or 4 for ■QP255-1 EA #5 Santoprene®* tube Classic / SVP / QP255-2 2-PK M128 M05 only

QP25T■-1 EA Select Versilon™* tube Classic / SVP# 1, 2, 3, 4 or 5 for ■

QP17■-1 EA Select Santoprene®* tube Classic / SVPQP17■-2 2-PK # 1, 2, 3, 4 or 5 for ■

QP17T■-1 EA Select Versilon™* tube Classic / SVP# 1, 2, 3, 4 or 5 for ■

EURO

PEEU

ROPE

QuickPro® Pump Head with LEAK DETECT 25 psi (1.7 bar) max.Includes pump head, tube, ferrules 1/4" (EUROPE 6 mm)


S310■-1 EA Select Santoprene®* tube S Series only S310■-2 2-PK # 3, 4 or 5 for ■S320■-1 EA Select Versilon™* tube

# 3, 4 or 5 for ■

S315■-1 EA Select Santoprene®* tube S315■-2 2-PK # 3, 4 or 5 for ■

S325■-1 EA Select Versilon™* tube # 3, 4 or 5 for ■

Refer to the Flow Rate Output Charts to match the pump modelwith the correct tube.

PUMP HEADS QuickPro® PUMP LINE

S SERIES

S SERIESQuickPro® Pump Head with LEAK DETECT 100 psi (6.9 bar) max.

Includes pump head, tube, duckbill, ferrules 1/4" (EUROPE 6 mm)


S310■-1 EA Select Santoprene®* tube S Series only S310■-2 2-PK # 1, 2 or 7 for ■S320■-1 EA Select Versilon™* tube

# 1 or 2 for ■

S315■-1 EA Select Santoprene®* tubeS315■-2 2-PK # 1, 2 or 7 for ■S325■-1 EA Select Versilon™* tube

# 1 or 2 for ■

EURO

PEEU

ROPE

QuickPro® Pump Head 26-100 psi (1.8-6.9 bar) Includes pump head, tube, duckbill, ferrules 1/4" (EUROPE 6 mm)


QP10■-1 EA Select Santoprene®* tube Classic / SVP# 1 or 2 for ■

QP107-1 EA #7 Santoprene®* tube Classic 45 & 85 only /SVP / M128 M07 only

QP10T■-1 EA Select Versilon™* tube Classic / SVP# 1 or 2 for ■

QP69■-1 EA Select Santoprene®* tube Classic / SVP# 1 or 2 for ■

QP697-1 EA #7 Santoprene®* tube Classic (45 & 85 only) /SVP

QP69T■-1 EA Select Versilon™* tube Classic / SVP# 1 or 2 for ■


QuickPro® Innermost Pump Head 0-25 psi (0-1.7 bar) Includes innermost pump head, tube, ferrules 1/4" (EUROPE 6 mm)


QPA25■-1 EA Select Santoprene®* tube Classic 100 & 170 onlyQPA25■-2 2-PK # 1, 2, 3, 4 or 5 for ■

QPA17■-1 EA Select Santoprene®* tube Classic 100 & 170 onlyQPA17■-2 2-PK # 1, 2, 3, 4 or 5 for ■EU

ROPE

EURO

PE

* Confirm material compatibility with the chemical resistance guide in the catalog.

PUMP HEADS - INNERMOST Classic Series Double Head


QuickPro® Innermost Pump Head 26-100 psi (1.8-6.9 bar) Includes innermost pump head, tube, duckbill, ferrules 1/4" (EUROPE 6 mm)


QPA10■-1 EA Select Santoprene®* tube Classic 100 & 170 onlyQPA10■-2 2-PK select # 1 or 2 for ■

QPA69■-1 EA Select Santoprene®* tube Classic 100 & 170 onlyQPA69■-2 2-PK # 1 or 2 for ■

QuickPro® Innermost Pump Head Parts


QP10A-1 EA Pump Head Cover Classic 100 & 170 onlyQP10A-2 2-PKQP50A-1 EA Roller Assembly

The Classic, SVP, M128 and S series are manufactured with the patentpending QuickPro® pump head. The QuickPro® contains a collapsible rollerassembly and the housing is attached by latches instead of screws.

QuickPro® Pump Head Service Kits 25 psi (1.7 bar) maximum Kit includes parts as shown, duckbill not included


S310■K KIT Kit-Select Santoprene®* tube S Series# 3, 4 or 5 for ■

S320■K KIT Kit-Select Versilon™* tube # 3, 4 or 5 for ■

S311■K KIT Kit-Select Santoprene®* tube # 3, 4 or 5 for ■

S321■K KIT Kit-Select Versilon™* tube Classic / SVP# 3, 4 or 5 for ■

EURO

PE

Ferrules


46 www.stenner.com

PUMP HEAD SERVICE KITS

QuickPro® Pump Head Service Kits 0-25 psi (0-1.7 bar) Kit includes parts as shown, duckbill not included


QP25■K KIT Kit-Select Santoprene®* tube Classic / SVP# 1, 2, 3 or 4 for ■

QP255K KIT Kit-#5 Santoprene®* tube Classic / SVP / M128 M05 only

QP25T■K KIT Kit-Select Versilon™* tube Classic / SVP# 1, 2, 3, 4 or 5 for ■

QP17■K KIT Kit-Select Santoprene®* tube Classic / SVP# 1, 2, 3, 4 or 5 for ■

QP17T■K KIT Kit-Select Versilon™* tube # 1, 2, 3, 4 or 5 for ■

EURO

PE

QuickPro® Pump Head Service Kits 26-100 psi (1.8-6.9 bar)Kit includes parts as shown


QP10■K KIT Kit-Select Santoprene®* tube Classic / SVP# 1 or 2 for ■

QP107K KIT Kit-#7 Santoprene®* tube Classic 45 & 85 only / SVP / M128 M07 only

QP10T■K KIT Kit-Select Versilon™* tube Classic / SVP # 1 or 2 for ■

QP69■K KIT Kit-Select Santoprene®* tube Classic / SVP# 1 or 2 for ■

QP697K KIT Kit-#7 Santoprene®* tube Classic 45 & 85 only / SVP

QP69T■K KIT Kit-Select Versilon™* tube Classic / SVP# 1 or 2 for ■

EURO

PE

S SERIES

QuickPro® Pump Head Service Kits 100 psi (6.9 bar) maximumKit includes parts as shown


S310■K KIT Kit-Select Santoprene®* tube S Series# 1, 2 or 7 for ■

S320■K KIT Kit-Select Versilon™* tube # 1 or 2 for ■

S311■K KIT Kit-Select Santoprene®* tube # 1, 2 or 7 for ■

S321■K KIT Kit-Select Versilon™* tube # 1 or 2 for ■

S SERIES


EURO

PE

The Classic, SVP, M128 and S series are manufactured with thepatent pending QuickPro® pump head. The QuickPro® contains acollapsible roller assembly and the housing is attached bylatches instead of screws.

Pump Tube

Connecting Nuts

LatchesRoller Assemblyor Roller Assembly with Spline,S Series only Duckbill

QuickPro® PUMP LINE

Latches

QP Tube Housing Coveror QP Tube Housing Cover withLeak Detect, S Series only

QP Roller Assemblyor QP Roller Assembly withSpline, S Series only

Pump TubesPage 43


QuickPro® PUMP LINE - Pump Head Parts


QP400-1 EA QP Tube Housing Classic / SVP / M128QP400-2 2-PK with Latches

QP401-2 2-PK QP Latches only Classic / SVP / S / M128

QP500-1 EA QP Roller Assembly Classic / SVP / M128QP500-4 4-PKQP501-3 EA QP Roller Arm Assembly Classic / SVP / S /

includes arms, bushings, M128 rollers, screws

QP100-1 EA QP Tube Housing Cover Classic / SVP / M128QP100-4 4-PK with Bushing

PUMP HEAD PARTS

QP Tube Housing with Latchesor QP Tube Housing with Leak Detectand Latches, S Series only

Pump Tubes Page 43 Pump Head CoverBlack Roller AssemblyWhite Roller Assembly

ECON PUMP LINE - Pump Head Parts


EC350 EA White Roller Assembly

EC351 EA Black Roller Assembly

EC355 EA Pump Head Cover All Econ Pumps


S SERIES

Refer to the Flow Rate OutputCharts to match the Econ pumpmodel with the correct tube and roller assembly.

QuickPro® PUMP LINE - Pump Head with Leak Detect Parts


S3400-1 EA QP Tube Housing with S Series onlyS3400-2 2-PK Leak Detect and Latches

S3500-1 EA QP Roller AssemblyS3500-4 4-PK with Spline

S3600-1 EA QP Tube Housing CoverS3600-4 4-PK with Leak Detect

QP401-2 2-PK QP Latches only Classic / SVP / S / M128

QP501-3 EA QP Roller Arm Assemblyincludes arms, bushings, rollers, screws

The Classic, SVP, M128 and S series aremanufactured with the patent pendingQuickPro® pump head. The QuickPro® containsa collapsible roller assembly and the housingis attached by latches instead of screws.

48 www.stenner.com


Injection Fittings 0-25 psi (0-1.7 bar)


UCAK300 EA Injection Fitting with Nut & All Pumps MCAK300 5-PK Ferrule 1/4"

UCAK3CE KIT Injection Fitting with Nut & Ferrule 6 mmE U

R OP E

Injection Fitting with Nut & Ferrule 1/4"

Injection Check Valve 1/4"

Injection Check Valve 3/8"

Check Valves 26-100 psi (1.8-6.9 bar)


UCDBINJ EA CV includes Santoprene®* duckbill, All PumpsMCDBINJ 5-PK ferrule 1/4"

UCTYINJ EA CV includes Pellathane®* duckbill, MCTYINJ 5-PK ferrule 1/4"

UCKMINJ EA CV includes FKM* duckbill, MCKMINJ 5-PK ferrule 1/4"

UCINJ38 EA CV includes Santoprene®* duckbill, Classic / SVPMCINJ38 5-PK ferrule 3/8"

UCTYIJ38 EA CV includes Pellathane®* duckbill, MCTYIJ38 5-PK ferrule 3/8"

UCKMI38 EA CV includes FKM* duckbill, MCKMI38 5-PK ferrule 3/8"

BCV14TVH EA Injection ball check valve 1/4" All Pumps

UCINJCE EA CV includes Santoprene®* duckbill, MCINJCE 5-PK ferrule 6 mm

UCTINJCE EA CV includes Pellathane®* duckbill,MCTINJCE 5-PK ferrule 6 mm

UCKMJCE EA CV includes FKM* duckbill,MCKMJCE 5-PK ferrule 6 mm

EURO

PE

Check Valve Parts 26-100 psi (1.8-6.9 bar)


CVIJ1/4 EA Check Valve Injection Fitting 1/4" All Pumps

CVIJ3/8 EA Check Valve Injection Fitting 3/8"

UCCVDB0 2-PK Santoprene®* Check Valve DuckbillMCCVDB0 5-PK

CVIJOR EA Santoprene®* Check Valve O-Ring

UCTYDB2 2-PK Pellathane®* Check Valve DuckbillMCTYDB5 5-PKUCKMDB0 2-PK FKM* Check Valve DuckbillMCKMDB0 5-PK & O-Ring

TVIJOR EA Pellathane®* Check Valve O-Ring

Santoprene® DuckbillInjection Fitting Santoprene® O-Ring

Pellathane® Duckbill FKM* Duckbill FKM* O-Ring

CHECK VALVES and INJECTION PARTS QuickPro® PUMP LINE

ECON PUMP LINE


Connecting Nut 1/4" Connecting Nut 3/8" with Adapter

Ferrule 1/4"

Weighted Suction Line Strainer

Connecting Nut 3/8"

AquaShield® Flow Indicatorwith Bracket

Filter Assembly

Suction/Discharge Tubing


AK4002B ROLL 1/4" x 20' UV Black All Pumps

AK4002W ROLL 1/4" x 20' White

AK4010B ROLL 1/4" x 100' UV Black


AK4100B ROLL 1/4" x 1000' UV Black


MALT02B ROLL 3/8" x 20' UV Black MALT002 ROLL 3/8" x 20' White

MALT10B ROLL 3/8" x 100' UV Black

MALT010 ROLL 3/8" x 100' White MALTB10 ROLL 3/8" x 1000' UV Black

MALT100 ROLL 3/8" x 1000' White

AK20W6M ROLL 6 mm x 20' White

3/8" UV Black1/4" White

EURO

PE

MISC. PARTS and SUCTION/DISCHARGE TUBING

Miscellaneous Parts


UCAK100 10-PK Connecting Nut 1/4" All PumpsMCAK100 24-PKMANUT00 EA Connecting Nut 3/8"

UCADPTR 2-PK Connecting Nut 3/8" MCADPTR 5-PK with Adapter

UCAK200 10-PK Ferrule 1/4" MCAK200 24-PK

ST114 EA Weighted Suction Line Strainer 1/4"

ST138 EA Weighted Suction Line Strainer 3/8"

MAGRE55 EA AquaShield® 5.5 oz. Tube

AK600 EA Flow Indicator 1/4" with Bracket

AK700 EA Flow Indicator 3/8" with Bracket

AK900 EA Flow Indicator Bracket Flow Indicator

P2000 EA Filter Assembly Prop. Inj. Sys.

MCAK2CE 24-PK Ferrule 6 mm All Pumps

ST106 EA Weighted Suction Line Strainer 6 mm

AK800 EA Flow Indicator 6 mm with Bracket

EURO

PE


50 www.stenner.com

Motor 60Hz


PM6041D EA 120V Adjustable 45 & 100

PM6042D EA 220V

PM6081D EA 120V Adjustable 85 & 170

PM6082D EA 220V

ME6041D EA 120V Fixed 45

ME6042D EA 220V

ME6081D EA 120V Fixed 85

ME6082D EA 220V

DM6041D EA 120V Fixed 100

DM6042D EA 220V

DM6081D EA 120V Fixed 170

DM6082D EA 220V

Pressure Spring(Adjustable pumps only)

Motor Base

Motor 50Hz


PM64230 EA 230V Adjustable 45 & 100

PM6426D EA 250V

PM68230 EA 230V Adjustable 85 & 170

PM6826D EA 250V

ME64230 EA 230V Fixed 45

ME6426D EA 250V

ME68230 EA 230V Fixed 85

ME6826D EA 250V

DM64230 EA 230V Fixed 100

DM64250 EA 250V

DM68230 EA 230V Fixed 170

DM68250 EA 250V

Motor Service Kits

Kit includes parts as shown PART NUMBER UM DESCRIPTION Works with

MSK120 KIT 120V 60Hz All Classic Pumps

MSK220 KIT 220V 60Hz

Gear Case Service Kits


GSK45A KIT Adjustable 45 & 100

GSK85A KIT Adjustable 85 & 170

GSK45F KIT Fixed 45

GSK85F KIT Fixed 85

Wire Nuts

Coil Ground Screw ECoil Screw G with

Lock Washer

Coil

Rotor Assembly & Fan

Cover Screw B

Motor Shaftwith Gear

Phenolic Gearwith SpacerGear Post

MetalReduction

Gear

AquaShield®

Gear CaseService Kit

MOTORS Classic SeriesIN

TERN

ATIO

NAL


1

10

3 5

9

1413

114

7

8

2

6

Motor Parts

DIAGRAM PART NUMBER UM DESCRIPTION Works with

1 MP90000 EA Rain Roof All Classic Pumps

Not shown MP90001 EA Pump Cover Adjustable 45 & 85

Not shown MP90002 KIT Pump Cover & Rain Roof

2 MP6B010 EA Power Cord 120V All Classic Pumps

MP6B020 EA Power Cord 220V

3 MP6C000 EA Switch Boot

4 PM6E000 EA Toggle Switch

5 MP6D000 EA On-Off Switch Plate

6 PM6A0BL EA Motor Cover with 120V Cord

PM6A0OL EA Motor Cover with 220V Cord

7 PM6F000 EA Motor Fan

8 MP70000 EA Motor Base

9 MP80000 EA Mounting Bracket

10 PMBRPL2 EA Rotor Assembly with Bearings, Brackets, Tolerance Rings & Fan

11 MP6J115 EA Coil 60Hz 120V

MP6J226 EA Coil 60Hz 220V




12 PM6K0BL EA Gear Case with Posts All Classic Pumps

13 PM6M000 EA Gear Posts

14 MP6N040 EA Phenolic Gear with Adjustable 45& 100/ Spacer 26 rpm Fixed 45 & 100

MP6N080 EA Phenolic Gear with Adjustable 85& 170/ Spacer 44 rpm Fixed 85 & 170

15 MP6O040 EA Metal Reduction Adjustable 45& 100/ Gear 26 rpm Fixed 45 & 100

MP6O080 EA Metal Reduction Adjustable 85& 170/ Gear 44 rpm Fixed 85 & 170

16 MP6Q00D EA Motor Shaft Adjustable 45, 85, with Gear 100 & 170

ME6Q0LD EA Motor Shaft Fixed 45 & 85 with Gear

DM6Q0LD EA Motor Shaft Fixed 100 & 170 with Gear

17 PM6R0BL EA Gear Case Cover All Classic Pumps

18 MP6T000 EA Pressure Spring Adjustable 45, 85, 100 & 170

19 UCCPS0B 10-PK Cover Screw B All PumpsMCCPS0B 24-PK

INTE

RNAT

ION

AL

1915 1612

1817

MOTOR PARTS Classic Series

Motor Parts

DIAGRAM PART NUMBER UM DESCRIPTION Works with Econ Pumps

1 EC302 EA Drive Assembly Pad Econ: FP / Integrator™ / LD / Stennicator / T

Not shown EC300 EA DC Motor, brushed with leads Econ T E10 only

Not shown EC307 EA DC Motor, brushed with leads Econ T E20 only

Not shown EC301 EA DC Motor, brushless Econ: FP / Integrator™ / LD / Stennicator

2 EC310 KIT Gear Kit includes spacers, screws & AquaShield® Econ: T E10 only / LD

EC320 KIT Gear Kit includes spacers, screws & AquaShield® Econ: T E20 only / FP / Integrator™ / Stennicator

3 EC330 EA Gear Case Front Cover All Econ Pumps

4 UCCPS0B 10-PK Cover Screw B All Econ PumpsMCCPS0B 24-PK

52 www.stenner.com

1 Drive shown for reference, not sold separately

2 3

Mounting Kit Stand

4

MOTOR PARTS ECON PUMP LINE

Optional Mounting Accessories

PART NUMBER UM DESCRIPTION Works with Econ Pumps

EC303 KIT Mounting Kit (for wall mount or Stenner tank) Econ FP / Econ T /

EC304 EA Stand (for horizontal display or wall mount)

All Econ Pumps


321 4 5 6 7 8 10 12 14 15

9 13

11

16

Feed Rate Service Kits


FSK100 KIT Feed Rate Control Adjustable 45, 85, Service Kit 100 & 170

Index Plate

AquaShield®

Lifter

Variable Cam

Screw A

Feed Rate Control with Shaft


FC5040D EA Adjustable 45 & 85

DM5040D EA Adjustable 100 & 170

Feed Rate Control Parts


1 FCS000A EA FRC Screw A

2 FC5N000 EA Feed Rate Mounting Plate

3 FC5M040 EA Dial Ring

4 UCFC5H0 2-PK Variable Cam MCFC5H0 5-PK

5 UCFC5L1 2-PK Index Pin LifterMCFC5L1 5-PK

6 FC5L003 EA Index Pin Holder

7 FC5L005 EA Index Pin Spring

8 FC5L002 EA Index Pin

9 UCFC5AY EA Index Pin Assembly MCFC5AY 2-PK with Lifter includes

5�6�7 & 8


10 FC5K00D EA Index Spider

11 FC5LASY EA Index Spider Assembly includes 9 & 10

12 UCFC5ID EA Index Plate MCFC5ID 5-PK

13 FC5D0OS EA Feed Rate Housing with Roller Clutch, Seal & Rivets

14 FCS000C EA Mounting Rivet C

15 UCFC5AD EA Main Shaft Adjustable 45 & 85MCFC5AD 2-PK

16 DM5A00D EA Main Shaft Adjustable

100 & 170

Adjustable 45, 85,100 & 170

Adjustable 45, 85,100 & 170

FEED RATE CONTROL Classic Series

Feed Rate Controlwith Shaft

54 www.stenner.com

MIXER - Drive Assembly Service KitKit includes parts as shown

PART NUMBER UM DESCRIPTION

MX120 KIT 120V 60Hz

MX220 KIT 220V 60Hz

Wire Nuts

Coil Ground Screw ECoil Screw G with

Lock Washer

Coil

Mixer Rotor Assembly & FanDrive Assembly Tank Mount with Drive Shaft Head Assembly

Wetted Parts

WATER METER - JLP Plastic Water Meters Only

PART NUMBER UM DESCRIPTION Works with JLP Meter

JLP38009P 2-PK 3/4" Plastic Couplings 3/4" with Gaskets

JLP38012P 2-PK 1" Plastic Couplings 1"with Gaskets

JLP38007R 2-PK 1/8" Rubber Gaskets 3/4"for 3/4"

JLP38012R 2-PK 1/8" Rubber Gaskets 1"for 1"

JLP32RS EA Reed Switch, single for 3/4," 1", 1.5"1 ppg or 10 ppg with screw

JLP34RS EA Reed Switch, 2 ppg or 4 ppgdual 2 ppg with screw

MIXER and WATER METER PARTS

MIXER - Tank Mount with Drive Shaft


MX75M EA Works with 7.5-Gallon tank

MX15M EA Works with15-Gallon tank

MX30M EA Works with 30-Gallon tank

MIXER - Head Assembly


MX100 EA Works with all mixers

MIXER - Drive Assembly


MXAD EA 120V 60Hz

MXBD EA 220V 60Hz

PARTS INDEX


PAGE PAGE PAGE PAGE PAGE PAGE

AK20W6M 49AK4002B 49AK4002W 49AK4010B 49AK4010W 49AK4100B 49AK4100W 49AK600 49AK700 49AK800 49AK900 49BCV14TVH 48CVIJ1/4 48CVIJ3/8 48CVIJOR 48DM5040D 53DM5A00D 53DM6041D 50DM6042D 50DM6081D 50DM6082D 50DM64230 50DM64250 50DM68230 50DM68250 50DM6Q0LD 51EC300 52EC301 52EC302 52EC303 52EC304 52EC30■-2 43EC307 52EC310 52EC320 52EC330 52EC350 47EC351 47EC355 47EC500 37EC50C 37EC501 37

EC51C 37FC5040D 53FC5D0OS 53FC5K00D 53FC5LASY 53 FC5L002 53FC5L003 53FC5L005 53FC5M040 53FC5N000 53FCS000A 53FCS000C 53FSK100 53GSK45A 50GSK45F 50 GSK85F 50GSK85A 50JLP38009P 54JLP38012P 54JLP38007R 54JLP38012R 54JLP32RS 54JLP34RS 54MAGRE55 49MALT002 49MALT010 49MALT02B 49MALT100 49MALT10B 49MALTB10 49MANUT00 49MCADPTR 49MCAK100 49MCAK200 49MCAK2CE 49MCAK300 48MCCP2■CE 43MCCP20■ 43MCCPS0B 51, 52MCCVDB0 48MCDBINJ 48MCFC5AD 53

MCFC5AY 53MCFC5H0 53MCFC5ID 53MCFC5L1 53MCINJ38 48MCKMDB0 48MCKMINJ 48MCKMI38 48MCKMJCE 48MCTY■CE 43MCTYDB5 48MCTYG0■ 43MCTYIJ38 48MCTYINJ 48ME6041D 50ME6042D 50 ME6081D 50ME6082D 50ME64230 50ME6426D 50ME68230 50ME6826D 50ME6Q0LD 51MP6B010 51MP6B020 51MP6C000 51MP6D000 51 MP6J115 51MP6J222 51MP6J223 51MP6J226 51MP6N040 51MP6N080 51MP6O040 51MP6O080 51MP6Q00D 51MP6T000 51MP70000 51MP80000 51MP90000 51MP90001 51MP90002 51

MSK120 50MSK220 50MX100 54MX120 54MX220 54MX15M 54MX30M 54MX75M 54MXAD 54MXBD 54P2000 49PM6041D 50PM6042D 50PM6081D 50PM6082D 50 PM64230 50PM6426D 50PM68230 50PM6826D 50PM6A0BL 51PM6A00L 51PM6E000 51PM6F000 51PM6K0BL 51PM6M000 51PM6R0BL 51PMBRPL2 51QP10■-1 44QP10■K 46QP100-1 47QP100-4 47QP10A-1 45QP10A-2 45QP10T■-1 44QP10T■K 46QP17■-1 44QP17■-2 44QP17■K 46QP17T■-1 44QP25■-1 44QP25■-2 44QP25■K 46

QP25T■-1 44QP25T■K 46QP400-1 47QP400-2 47QP401-2 47QP500-1 47QP500-4 47QP501-3 47QP50A-1 45QP69■-1 44QP69■K 46QP69T■-1 44QP69T■K 46QPA10■-1 45QPA10■-2 45QPA17■-1 45QPA17■-2 45QPA25■-1 45QPA25■-2 45QPA69■-1 45QPA69■-2 45S310■K 46S310■-1 44S310■-2 44S311■K 46S315■-1 44S315■-2 44S320■K 46S320■-1 44S321■K 46S325■-1 44S3400-1 47S3400-2 47S3500-1 47S3500-4 47S3600-1 47S3600-4 47SSMRS20 41ST114 49ST138 49STS7GC 35STS7NC 35

STS15GC 35STS15NC 35STS30GC 35STS30NC 35STS7G-02 35STS7N-02 35STS15G-02 35STS15N-02 35STS30G-02 35STS30N-02 35TVIJOR 48UC■FDCE 43UCADPTR 49UCAK100 49UCAK200 49UCAK300 48UCAK3CE 48UCCP■FD 43UCCP20■ 43UCCP2■CE 43UCCPS0B 51, 52UCCVDB0 48UCDBINJ 48UCFC5AD 53UCFC5AY 53UCFC5H0 53UCFC5ID 53UCFC5L1 53UCKMDBO 48UCKMINJ 48UCKMJCE 48UCKMI38 48UCINJ38 48UCTY■CE 43UCTY■DCE 43UCTY■FD 43UCTYDB2 48UCTYG0■ 43UCTYIJ38 48UCTYINJ 48

56 www.stenner.com

The information is provided ONLY as a guide to assist in determining chemical compatibilityfor wetted components. Testing under the specific conditions of the application is recommended. Stenner PumpCompany assumes no responsibility for its accuracy. Outside factors including but not limited to temperature,pressure, mechanical stress, and solution concentration can affect material compatibility in a particular application.Stenner makes no warranty, expressed or implied, as to the accuracy of this guide or any materials’ suitability forfitness or purpose for any application. User assumes all risk and liability for use of this guide.

Ratings Key – Chemical EffectA Fluid has minor or no effectsB Fluid has minor to moderate effectsC Fluid has severe effects

* No data available

Chemical / Solution PP/Santoprene® Versilon™ PVC LDPE FKM

Acetic Acid 20% A B B A *Acetic Acid 30% B C C A BAcetic Acid, Glacial C C C C CAcetic Anhydride B C C C CAliphatic Hydrocarbons B B B B *Aluminum Chloride A A A B AAluminum Sulfate A A A A AAlums A A A A AAmmonium Acetate B B A A AAmmonium Carbonate A A A A AAmmonium Chloride A B A B AAmmonium Hydroxide A B A A BAmmonium Nitrate A A A A BAmmonium Phosphate A A A A AAmmonium Sulfate A A A A BAmyl Acetate A C C C CAniline B C C C CAntimony Salts A A A B *Arsenic Salts A A A B *Barium Hydroxide A A A B ABarium Salts A * A B *Beer A A A A ABenzene C C C C BBenzoic Acid A C A A ABleach 5.25% A A A A *Boric Acid A A A A ABromine A B B B AButyl Acetate A C C C CButyric Acid A C B C *Calcium Chloride A A B A ACalcium Hydroxide A C A A ACalcium Hypochlorite 5% A B A A ACalcium Salts A A A A *Carbon Disulfide C C C C ACarbon Tetrachloride C C C C ACastor Oil B A A * A


Chlorine * * * * *see Sodium Hypochlorite Chloroacetic Acid A C B C CChloroform C C C C AChlorosulfonic Acid B C C C CChromic Acid < 50% B C B A AChromium Salts A * A B *Citric Acid B B B C ACopper Chloride A A A A ACopper Sulfate A A A A ACottonseed Oil B A B A AEthyl Acetate A C C C CEthyl Alcohol B C C B BEthyl Chloride C C C C AEthylene Dichloride C C C C AEthylene Glycol A A A A AEthylene Oxide B A C C CEucalyptus Oil C B C C *Fatty Acids C B A A AFerric Chloride A A A A AFerric Sulfate A A A A AFerrous Chloride A A A A AFerrous Sulfate A A A A AFluoboric Acid A C A C *Fluosilicic Acid A A A A AFormaldehyde < 40% A B A C CFormic Acid A C B C CGlucose A A A A AGlue A A A A AGlycerin A A A A AHydrochloric Acid 20% A C A A AHydrochloric Acid 37% A C A A AHydrocyanic Acid A B A A AHydrofluoric Acid < 48% A C B A AHydrofluoric Acid 48-75% A C C C AHydrofluoric Acid, anhydrous B C C C C

CHEMICAL RESISTANCE GUIDE



Sea Water A A A A ASilicone Oil C A A B ASilver Nitrate A A A A ASoap Solutions A A A C ASodium A A A A *Sodium Bisulfate A A A A ASodium Bisulfite A A A A ASodium Borate A A A A ASodium Carbonate A A A A ASodium Chlorate A A A A ASodium Chloride A A A A ASodium Dichromate 20% A * B * ASodium Hydroxide < 20% A B A B ASodium Hydroxide 20-46.5% A C A B ASodium Hypochlorite5% A† B A A ASodium Hypochlorite6-15% A† B A A *Sodium Nitrate A A A A ASodium Silicate A A A A ASodium Sulfide A A A A ASodium Sulfite A A A A ASolvents C B B B *Soybean Oil B A A A AStannous Chloride 15% A A A B AStearic Acid A B B B ASulfur Dioxide liquid A C C C BSulfur Trioxide B C A C ASulfuric Acid < 40% B B B B ASulfuric Acid > 40% C C C C ASulfurous Acid A A A B CTannic Acid 10% A B A B ATanning Liquors A A A A ATartaric Acid A A A A ATitanium Salts A A A B *Triethanolamine A C C C CTri Sodium Phosphate A A A A ATung Oil B B C C ATurpentine B B C C AUrea B A B A AWater & Brine A A A A AZinc Chloride A A B A AZinc Salts A A A A *


Hydrogen Peroxide < 50% A B A B AHydrogen Sulfide A A B A CIodine A A C B ALactic Acid A B B A ALead Acetate B A A A CLinseed Oil B A A A ALimonene C B B B *Lubricating Oils C A B C AMagnesium Chloride A A B A AMagnesium Hydroxide A A A A AMagnesium Sulfate A A A A AMalic Acid A B A A AManganese Salts A A A A *Mercuric Chloride A A A A AMethylene Chloride C C C C BMineral Oil B A B B AMineral Spirits C A B B AMuriatic Acid, 20° Baume A C A A ANitric Acid < 10% A C A B ANitric Acid 10-30% B C A C ANitric Acid 30-60% C C B C ANitric Acid 70% C C B C ANitric Acid, red fuming C C C C CNitrous Acid A B * * BOleic Acid A B C C BOleum 20-25% C C C C *Oxalic Acid A C B A APalmitic Acid A B B A APetroleum Distillates C B B C *Phenol B C C B APhosphoric Acid A C A A APhthalic Acid A C A A APickling Solutions A C * * BPlating Solutions A C * * APolyphosphate A A A A *Potassium Carbonate A A A A APotassium Chlorate A A A A APotassium Hydroxide A A A A CPotassium Dichromate A A A A APotassium Iodide A A B B APotassium Permanganate A A A A A

† Products tested and certified by WQA to ANSI/NSF Standard 61 for contact with Sodium Hypochlorite and Water only and Standard ANSI/NSF 372 for low lead compliance.NOTE: FKM tested to ANSI/NSF 61 with water only.

58 www.stenner.com

Limited WarrantyStenner Pump Company will for a period of one (1) year from the date of purchase (proof of purchase required) repair or replace – at our option– all defective parts. Stenner is not responsible for any removal or installation costs. Pump tube assemblies and rubber components areconsidered perishable and are not covered in this warranty. Pump tube will be replaced each time a pump is in for service, unless otherwisespecified. The cost of the pump tube replacement will be the responsibility of the customer. Stenner will incur shipping costs for warrantyproducts shipped from our factory in Jacksonville, Florida. Any tampering with major components, chemical damage, faulty wiring, weatherconditions, water damage, power surges, or products not used with reasonable care and maintained in accordance with the instructions willvoid the warranty. Stenner limits its liability solely to the cost of the original product. We make no other warranty expressed or implied.

ReturnsStenner offers a 30-day return policy on factory direct purchases. Except as otherwise provided, no merchandise will be accepted for return after30 days from purchase. To return merchandise at any time, call Stenner at 800.683.2378 for a Return Merchandise Authorization (RMA) number.A 15% restocking fee will be applied. Include a copy of your invoice or packing slip with your return.

Problem with ShipmentCheck orders immediately upon arrival. Any claim of damage, shortage or order discrepancy must be noted on the delivery receipt and reportedto Stenner Customer Service at 800.683.2378 within seven (7) days of receipt.

Pump Service & RepairsBefore returning a pump for warranty or repair, remove chemical from pump tube by running water through the tube, and then run the pumpdry. Following expiration of the warranty period, Stenner Pump Company will clean and overhaul any Stenner metering pump for a minimumlabor charge plus necessary replacement parts and shipping. All metering pumps received for overhaul will be restored to their originalcondition. The customer will be charged for missing parts unless specific instructions are given. To return merchandise for repair, call Stenner at 800.683.2378 or 904.641.1666 for a Return Merchandise Authorization (RMA) number.

DisclaimerThis information is not intended for specific application purposes. Stenner Pump Company reserves the right to make changes to prices,products, and specifications at any time without prior notice

TrademarksSantoprene®* is a registered trademark of Exxon Mobil Corporation.Versilon™* is a registered trademark of Saint-Gobain Performance Plastics.Pellathane®* is a registered trademark of The Dow Company.AquaShield® is a registered trademark of Houghton International.

* Refer to chemical resistance guide for compatibility.

POLICIES

STENNER PUMP COMPANY

3174 DeSalvo RoadJacksonville, Florida 32246 USA

Phone: 904.641.1666US Toll Free: 800.683.2378Fax: 904.642.1012

[email protected]

Hours of Operation (EST):Mon.–Thu. 7:30 am–5:30 pmFri. 7:00 am–5:30 pm

Assembled in the USA

© Stenner Pump Company All Rights Reserved

CATALOG 2017

catalog 2017 inspired by our customers€¢ tank system ships pre-assembled for quick installations...

Documents