TC9315

CAMERON® Compact Actuator

HS Series - Hydraulic Actuator Technical Data

2TC9315

All the information contained in this manual is the exclusive property of Cameron. Any repro-duction or use of the calculations, drawings, photographs, procedures or instructions, either expressed or implied, is forbidden without the written permission of Cameron or its authorized agent.

Initial ReleaseOctober 2013

Produced by Technical Publications, Houston, TX, USA

© 2013 Cameron

3TC9315

PREFACE

Unauthorized changes shall serve to terminate any contractual or other warranty, if any, on the equipment and may also result in equipment no longer meeting applicable requirements. Cameron hereby disclaims any and all liability, loss or expense resulting from any failure of equipment or any damage to any property or death or injury to any person resulting in whole or in part from any changes applied by anyone other than authorized Cameron personnel and the end-user of such product, by acceptance of the product and this data, hereby agrees to indemnify, defend and hold Cameron harmless from claims for any such liability, loss or expense.

File copies of this manual are maintained. Revisions and/or additions will be made as deemed necessary by Cameron. The drawings in this book are not drawn to scale, but the dimensions shown are accurate.

This book covers Cameron technical data.

Cameron P.O. Box 1212 Houston, Texas 77251-1212 713-939-2211 http://www.c-a-m.com

4TC9315

NOTES:

5TC9315

TABLE OF CONTENTS

Torque Charts .....................................................................................................................6

Double Acting Models ............................................................................................6

Spring Return Models .............................................................................................7

Overall Dimensional Data ..................................................................................................8

Double Acting Models ............................................................................................8

Spring Return Models .............................................................................................9

Actuator Mounting Dimensions (Bore and Keyway Option) ...........................................10

Double Acting Models ............................................................................................10

Spring Return Models .............................................................................................11

Actuator Mounting Dimensions (Spline Option) ..............................................................12

Double Acting Models ............................................................................................12

Spring Return Models .............................................................................................13

Actuator Accessory Mounting Dimensions .......................................................................14

Double Acting Models ............................................................................................14

Spring Return Models .............................................................................................15

6TC9315

TORQUE CHARTS

DOUBLE ACTING MODELS

(Metric - N•m)

Model150 bargTorque

210 bargTorque

HS3.5H-DA 2183 3056

HS5.5H-DA 3892 5450

HS9.5H-DA 6752 9453

HS18.5H-DA 12949 18129

HS29.0H-DA 20960 29344

HS38.5H-DA 27538 38554

(Imperial - in-lb)

Model2000 psig

Torque3000 psig

Torque

HS3.5H-DA 17767 26651

HS5.5H-DA 31676 47515

HS9.5H-DA 54954 82430

HS18.5H-DA 105390 158085

HS29.0H-DA 170590 255885

HS38.5H-DA 224128 336191

7TC9315

TORQUE CHARTS

SPRING RETURN MODELS

(Metric - N•m)

Model150 barg 210 barg

SST SRT SETOST ORT OET OST ORT OET

HS3.5H-SR* 2225 2003 1781 3529 3309 3088 1488 1267 1046

HS5.5H-SR* 3965 3350 2735 6251 5636 5021 2981 2365 1750

HS9.5H-SR* 6646 5264 3881 10510 9128 7746 5779 4397 3015

HS18.5H-SR* 13114 9983 6852 20741 17609 14478 12214 9082 5950

HS29.0H-SR* 24960 19888 14816 38778 33706 28634 19729 14657 9585

HS38.5H-SR* 28689 19839 10528 45311 36230 27149 30566 21715 12864

(Imperial - in-lb)

Model2000 psig 3000 psig

SST SRT SETOST ORT OET OST ORT OET

HS3.5H-SR* 18104 16297 14491 30768 28845 26922 13166 11213 9260

HS5.5H-SR* 32261 27257 22253 54497 49134 43772 26381 20936 15492

HS9.5H-SR* 54075 42826 31578 91626 79576 67525 51150 38916 26681

HS18.5H-SR* 106702 81227 55751 180811 153511 126211 108099 80383 52666

HS29.0H-SR* 203087 161819 120550 338052 293838 249624 174612 129723 84835

HS38.5H-SR* 233428 159545 85661 395008 315842 236676 270532 192194 113856

Note: OST: Oil Start Torque SST: Spring Start Torque ORT: Oil Run Torque SRT: Spring Run Torque OET: Oil End Torque SET: Spring End Torque * Add “C” for fail close or “O” for fail open

8TC9315

OVERALL DIMENSIONAL DATA

DOUBLE ACTING MODELS

A

D B

C

H

T

F

L L

F F

L

Metric

ModelDimensions

Weight(kg)

STDPort Size F

N°of

Port F

N°of

Port L

Displace-ment 90°

[L]ØA

(mm)B

(mm)C

(mm)ØD

(mm)H

(mm)T

(mm)

HS3.5H-DA 199 226 219 160 323 28 42 G 1/4-19 ISO 228-1 4 2 0.3

HS5.5H-DA 208 246 229 180 364 33 59 G 3/8-19 ISO 228-1 4 2 0.6

HS9.5H-DA 284 276 305 210 398 34 90 G 3/8-19 ISO 228-1 4 2 1

HS18.5H-DA 284 339 305 275 467 36 154 G 1/2-14 ISO 228-1 4 2 1.9

HS29.0H-DA 334 371 362 305 545 51 256 G 3/4-14 ISO 228-1 4 2 3

HS38.5H-DA 409 413 437 345 571 50 321 G 3/4-14 ISO 228-1 4 2 4

Imperial

ModelDimensions

Weight(lb)

STDPort Size F

N°of

Port F

N°of

Port L

Displace-ment 90°

[cu in]ØA(in)

B(in)

C(in)

ØD(in)

H(in)

T(in)

HS3.5H-DA 7.8 8.9 8.6 6.3 12.7 1.1 92 G 1/4-19 ISO 228-1 4 2 19.3

HS5.5H-DA 8.2 9.7 9.0 7.1 14.3 1.3 130 G 3/8-19 ISO 228-1 4 2 34.4

HS9.5H-DA 11.2 10.9 12.0 8.3 15.7 1.3 198 G 3/8-19 ISO 228-1 4 2 59.6

HS18.5H-DA 11.2 13.3 12.0 10.8 18.4 1.4 340 G 1/2-14 ISO 228-1 4 2 114.2

HS29.0H-DA 13.1 14.6 14.3 12.0 21.5 2.0 564 G 3/4-14 ISO 228-1 4 2 184.8

HS38.5H-DA 16.1 16.3 17.2 13.6 22.5 2.0 708 G 3/4-14 ISO 228-1 4 2 242.8

9TC9315

OVERALL DIMENSIONAL DATA

SPRING RETURN MODELS

C

D B

H

T

A FF

Metric

ModelDimensions

Weight(kg)

STDPort Size F

N° ofPort F

Displacement 90°[L]ØA

(mm)B

(mm)C

(mm)ØD

(mm)H

(mm)T

(mm)

HS3.5H-SR 220 292 240 285 508 27 131 G 3/8-19 ISO 228-1 2 0.5

HS5.5H-SR 238 349 259 342 583 33 222 G 1/2-14 ISO 228-1 2 0.9

HS9.5H-SR 280 412 301 405 672 31 372 G 1/2-14 ISO 228-1 2 1.5

HS18.5H-SR 335 501 356 494 833 30 698 G 3/4-14 ISO 228-1 2 3

HS29.0H-SR 390 583 418 576 952 50 1068 G 3/4-14 ISO 228-1 2 5.4

HS38.5H-SR 428 645 456 638 1032 44 1420 G 3/4-14 ISO 228-1 2 6.6

Imperial

ModelDimensions

Weight(lb)

STDPort Size F

N° ofPort F

Displacement 90°[cu in]ØA

(in)B

(in)C

(in)ØD(in)

H(in)

T(in)

HS3.5H-SR 8.7 11.5 9.4 11.2 20.0 1.1 289 G 3/8-19 ISO 228-1 2 31.1

HS5.5H-SR 9.4 13.7 10.2 13.5 23.0 1.3 489 G 1/2-14 ISO 228-1 2 55

HS9.5H-SR 11.0 16.2 11.9 15.9 26.5 1.2 820 G 1/2-14 ISO 228-1 2 93

HS18.5H-SR 13.2 19.7 14.0 19.4 32.8 1.2 1540 G 3/4-14 ISO 228-1 2 183.4

HS29.0H-SR 15.4 23.0 16.5 22.7 37.5 2.0 2355 G 3/4-14 ISO 228-1 2 330.7

HS38.5H-SR 16.9 25.4 18.0 25.1 40.6 1.7 3131 G 3/4-14 ISO 228-1 2 400.2

10TC9315

ACTUATOR MOUNTING DIMENSIONS (BORE AND KEYWAY OPTION)

DOUBLE ACTING MODELS

45.0°

45.0°

45.0°

22.5°

Ø G

Ø P

M

Ø S

B

C

FLOW AXIS

Metric (mm)

Model ØG M N° Holes M ØP N° Holes P

BoreDiameter

Bore Depth

Slot Key

ØS B C

HS3.5H-DA 179 M. 16 X 2 8 16 2 45 90 12 51

HS5.5H-DA 179 M. 16 X 2 8 16 2 55 100 14 62

HS9.5H-DA 254 M. 16 X 2 8 20 2 75 115 18 84

HS18.5H-DA 254 M. 16 X 2 8 20 2 90 120 22 101

HS29.0H-DA 298 M. 20 X 2.5 8 25 2 110 160 32 125

HS38.5H-DA 356 M. 30 X 3.5 8 30 2 130 190 32 145

Note: Above dimensional data indicates maximum default values. Contact Cameron engineering to confirm acceptance for any alternate values.

11TC9315

ACTUATOR MOUNTING DIMENSIONS (BORE AND KEYWAY OPTION)

SPRING RETURN MODELS

22.5°

45°

45°

45°Ø P

Ø G

M

Ø S

C

BFLOW AXIS

Metric (mm)

Model ØG M N° Holes M ØP N° Holes P

BoreDiameter

Bore Depth

Slot Key

ØS B C

HS3.5H-SR 179 M. 16 X 2 8 16 2 45 120 12 51

HS5.5H-SR 179 M. 16 X 2 8 16 2 55 130 14 62

HS9.5H-SR 254 M. 16 X 2 8 20 2 75 150 18 84

HS18.5H-SR 254 M. 16 X 2 8 20 2 90 180 22 101

HS29.0H-SR 298 M. 20 X 2.5 8 25 2 110 220 32 125

HS38.5H-SR 356 M. 30 X 3.5 8 30 2 130 240 32 145

Note: Above dimensional data indicates maximum default values. Contact Cameron engineering to confirm acceptance for any alternate values.

12TC9315

ACTUATOR MOUNTING DIMENSIONS (SPLINE OPTION)

DOUBLE ACTING MODELS

DETAIL A

THIS DRAWING AND THE CONFIDENTIAL TRADE SECRET INFORMATION ON IT ARE THE PROPERTY OF CAMERON. POSSESSION DOES NOT CONVEY ANY RIGHTS TO DISCLOSE, REPRODUCE OR USE SAME FOR ANY PURPOSE OTHER THAN THAT GRANTED BY EXPRESS WRITTEN PERMISSION OF CAMERON. THIS DRAWING IS TO BE RETURNED TO CAMERON UPON ITS REQUEST OR COMPLETION OF AUTHORIZED USE.

DO NOT SCALESURFACE TREATMENT

MATERIAL & HEAT TREAT

DRAWN BY:

CHECKED BY:

APPROVED BY:

ESTIMATEDWEIGHT:

INITIAL USE B/M:

DATE

DATE

DATE

SHEET REV:

INVENTOR - A0

G GAZZIERO

G GAZZIERO

C LIBERALE

2 Aug 13

2 Aug 13

2 Aug 13

169.1 LBS76.7 KG 1 OF 1 019E-1KAX95E600CDT

VALVES &MEASUREMENT

LHS 9500 DA

COMPACT ACTUATOR ASSY

8-API 5000

A

MACHINING

TOLERANCES UNLESSOTHERWISE SPECIFIED

DESIGN ED IN MILLIMETERS

DIMENSIONAL UNITS

MILLIMETERS[INCHES]

0.XX [.XXX]

0.X [.XX]

0. [.X]THIRD ANGLE

MACHINED FILLET RADII 0.38-1.27 [.015-.050]. BREAK ALL SHARP EDGES 0.2-0.8 [.01-.03] RADII OR 45°. SURFACE FINISH IN MICRO (µ) INCHES (Ra). INTERPRET DRAWING PER ASME Y14.5, ASME Y14.36, AND AWS A2.4 STANDARDS. SEE B/M FOR MATERIAL AND SPECIAL REQUIREMENTS. ITEM NUMBERS NOT APPEARING ON B/M DO NOT APPLY.

ANGLES

RAONALL

MACHINED SURFACES

± 2.5 = [.1]

± 0.5 = [.02]

± 0.13 = [.005]

± 0.5°

125

A

D B

C

H

T

H

P

G

M

S

22.5°

22.5°

45.0°

22.5°

P

S

45.0°

45.0° G

45.0

M

MOUNTING TYPE A MOUNTING TYPE B

H

L

X=

=

Y

=

D

M

NAMUR CONNECTION SEAT

= ZR

F

Metric (mm)

Model ØG M N° Holes M ØP N° Holes P S Depth

HS3.5H-DA 179 M. 16 X 2 8 16 2 DIN 5480-N45 X 2 X 21 X 9H 65

HS5.5H-DA 179 M. 16 X 2 8 16 2 DIN 5480-N55 X 2.5 X 20 X 9H 78

HS9.5H-DA 254 M. 16 X 2 8 20 2 DIN 5480-N65 X 2.5 X 24 X 9H 95

HS18.5H-DA 254 M. 16 X 2 8 20 2 DIN 5480-N75 X 3 X 24 X 9H 110

HS29.0H-DA 298 M. 20 X 2.5 8 25 2 DIN 5480-N90 X 3 X 28 X 9H 147

HS38.5H-DA 356 M. 30 X 3.5 8 30 2 DIN 5480-N100 X 3 X 32 X 9H 147

13TC9315

ACTUATOR MOUNTING DIMENSIONS (SPLINE OPTION)

SPRING RETURN MODELS

DETAIL A

THIS DRAWING AND THE CONFIDENTIAL TRADE SECRET INFORMATION ON IT ARE THE PROPERTY OF CAMERON. POSSESSION DOES NOT CONVEY ANY RIGHTS TO DISCLOSE, REPRODUCE OR USE SAME FOR ANY PURPOSE OTHER THAN THAT GRANTED BY EXPRESS WRITTEN PERMISSION OF CAMERON. THIS DRAWING IS TO BE RETURNED TO CAMERON UPON ITS REQUEST OR COMPLETION OF AUTHORIZED USE.

DO NOT SCALESURFACE TREATMENT

MATERIAL & HEAT TREAT

DRAWN BY:

CHECKED BY:

APPROVED BY:

ESTIMATEDWEIGHT:

INITIAL USE B/M:

DATE

DATE

DATE

SHEET REV:

INVENTOR - A0

G GAZZIERO

G GAZZIERO

C LIBERALE

2 Aug 13

2 Aug 13

2 Aug 13

792.4 LBS359.4 KG 1 OF 1 019E-1KBX95E600CDT

VALVES &MEASUREMENT

LHS 9500 HY SRC1

ACTUATOR ASSY

8-API 5000

A

MACHINING

TOLERANCES UNLESSOTHERWISE SPECIFIED

DESIGN ED IN MILLIMETERS

DIMENSIONAL UNITS

MILLIMETERS[INCHES]

0.XX [.XXX]

0.X [.XX]

0. [.X]THIRD ANGLE

MACHINED FILLET RADII 0.38-1.27 [.015-.050]. BREAK ALL SHARP EDGES 0.2-0.8 [.01-.03] RADII OR 45°. SURFACE FINISH IN MICRO (µ) INCHES (Ra). INTERPRET DRAWING PER ASME Y14.5, ASME Y14.36, AND AWS A2.4 STANDARDS. SEE B/M FOR MATERIAL AND SPECIAL REQUIREMENTS. ITEM NUMBERS NOT APPEARING ON B/M DO NOT APPLY.

ANGLES

RAONALL

MACHINED SURFACES

± 2.5 = [.1]

± 0.5 = [.02]

± 0.13 = [.005]

± 0.5°

125C

D B

H

T

A H

22.5°

45.0°

45.0°

45.0°P

G

M

S

MOUNTING TYPE A MOUNTING TYPE B

45.0°

45.0°

45.0°

PG

M

S

X

=

=

HD

M

F(depth = R)

Y

==

Z

NAMUR CONNECTION SEAT

L

Metric (mm)

Model ØG M N° Holes M ØP N° Holes P S Depth

HS3.5H-SR 179 M. 16 X 2 8 16 2 DIN 5480-N45 X 2 X 21 X 9H 65

HS5.5H-SR 179 M. 16 X 2 8 16 2 DIN 5480-N55 X 2.5 X 20 X 9H 74

HS9.5H-SR 254 M. 16 X 2 8 20 2 DIN 5480-N65 X 2.5 X 24 X 9H 95

HS18.5H-SR 254 M. 16 X 2 8 20 2 DIN 5480-N75 X 3 X 24 X 9H 110

HS29.0H-SR 298 M. 20 X 2.5 8 25 2 DIN 5480-N90 X 3 X 28 X 9H 117

HS38.5H-SR 356 M. 30 X 3.5 8 30 2 DIN 5480-N100 X 3 X 32 X 9H 147

14TC9315

ACTUATOR ACCESSORY MOUNTING DIMENSIONS

DOUBLE ACTING MODELS

DETAIL A

A

H

L

X=

=

Y

=

D

M

NAMUR CONNECTION SEAT

= ZR

F

M

Metric (mm)

Model ØZ M N° Holes M D X Y H L R F

HS3.5H-DA 15 M. 5 X 0.8 4 7 88 30 17 13 5.5 4

HS5.5H-DA 15 M. 5 X 0.8 4 7 101 30 17.4 11.4 5.5 4

HS9.5H-DA 15 M. 5 X 0.8 4 7 130 30 17.5 11..5 5.5 4

HS18.5H-DA 15 M. 5 X 0.8 4 7 176 30 16.5 11.5 5.5 4

HS29.0H-DA 15 M. 5 X 0.8 4 7 196 30 18 11 5.5 4

HS38.5H-DA 15 M. 5 X 0.8 4 7 221 30 17.6 9.6 5.5 4

15TC9315

ACTUATOR ACCESSORY MOUNTING DIMENSIONS

SPRING RETURN MODELS

DETAIL A

A

X=

=

HD

M

F(depth = R)

Y

==

Z

NAMUR CONNECTION SEAT

LM

Metric (mm)

Model ØZ M N° Holes M D X Y H L R F

HS3.5H-DA 15 M. 5 X 0.8 4 7 130 30 2 9 5.5 4

HS5.5H-DA 15 M. 5 X 0.8 4 7 176 30 2 9 5.5 4

HS9.5H-DA 15 M. 5 X 0.8 4 7 206 30 2 9 5.5 4

HS18.5H-DA 15 M. 5 X 0.8 4 7 266 30 2 9 5.5 4

HS29.0H-DA 15 M. 5 X 0.8 4 7 276 30 2 9 5.5 4

HS38.5H-DA 15 M. 5 X 0.8 4 7 306 30 2 9 5.5 4

© 2013 Cameron • Produced by Technical Publications, Houston, TX, USA • 09/13 • TC9315

VALVES AND MEASUREMENT

3250 Briarpark Drive, Suite 300

Houston, Texas 77042

For more information on CAMERON actuators:

www.c-a-m.com/ValveAutomation

ValveAutomation@c-a-m.com

HEALT

H S

AFE

TY A

ND ENVIRONMENTAL EX

CELLEN

CE

CAMERON

HSE Policy StatementAt Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt, nothing gets harmed.