On

lin

e d

ata

sh

ee

t

C20S-120104A11, C20E-120304A11C2000 Standard

SAFETY LIGHT CURTAINS

ABCDEF

HIJKLMNOPQRST

C20S-120104A11, C20E-120304A11 | C2000 StandardSAFETY LIGHT CURTAINS

Ordering information

System part Type Part no.

Sender C20S-120104A11 1016596

Receiver C20E-120304A11 1016597

1.) Concerns installation as a replacement part for previous type 2 device in machine: Regarding Machinery Directive2006/42/EC, Article 1, Paragraph (2a) this type 2 device may only be used as a replacement part for identical PL d / SIL2devices within the EU if the machine was put into circulation before 2015-05-10. Keep this note with your machine documen-tation. If the machine is sold on, this note and the information it contains must be passed on to every subsequent buyer. 2.)Concerns installation on new machines: Due to the amendment to the EN/IEC 61496-1 standard, this type 2 device may onlybe installed on new machines up to PL c / SIL1 as of 2015-05-10.

Other models and accessories www.sick.com/C2000_Standard

Detailed technical data

Features

Resolution 40 mm

Protective field height 1,200 mm

Scanning range 0 m ... 6 m

Response time ≤ 34 ms

Synchronization Optical synchronisation

Safety-related parameters

Type Type 2 (IEC 61496-1)

Safety integrity level SIL1 (IEC 61508)SILCL1 (EN 62061)

Category Category 2 (EN ISO 13849)

Test rate (internal test) 13 /s (EN ISO 13849) 1)

Maximum demand rate ≤ 8 min⁻¹ (EN ISO 13849) 2)

Performance level PL c (EN ISO 13849)

PFHD (mean probability of a dangerous fail-ure per hour)

2.2 x 10-8 (EN ISO 13849)

TM (mission time) 20 years (EN ISO 13849)

Safe state in the event of a fault At least one OSSD is in the OFF state.

1) Internal test. The test rate may not be exceeded if an external test is performed.2) Between two requirements on a safety-related response of the device, at least 100 internal or external tests must be carried out.

Functions

Functions Delivery status

External device monitoring (EDM) ✔ Activated

Beam coding ✔ Uncoded

2 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2018-06-16 10:36:15

Subject to change without notice

C20S-120104A11, C20E-120304A11 | C2000 StandardSAFETY LIGHT CURTAINS

Interfaces

System connection

Connection type Male connector M12, 8-pin

Permitted cable length ≤ 15 m 1)

Conductor cross-section 0.25 mm²

Configuration method Hard wired

Display elements 7-segment display

Status display LEDs

Fieldbus, industrial network

Integration via Flexi Soft safety controller CANopen, DeviceNet™, EtherCAT®, EtherNet/IP™, Modbus TCP, PROFIBUS DP, PROFINET 2)

1) The length of the connecting cable is limited, because wire resistance max. 4 Ohm.2) For additional information on Flexi Soft -> www.sick.com/Flexi_Soft.

Electrical data

Sender Receiver

Protection class III (EN 50178)

Output signal switching devices (OSSDs)

Type of output 2 PNP semiconductors, short-circuit protect-ed, cross-circuit monitored 1)

ON state, switching voltage HIGH 24 V DC (VS – 2.25 V DC ... VS)

OFF state, switching voltage LOW ≤ 3.5 V DC

Current-carrying capacity per OSSD ≤ 500 mA

1) Applies to the voltage range between –30 V and +30 V.

Mechanical data

Housing cross-section 34 mm x 29 mm

Ambient data

Enclosure rating IP65 (EN 60529)

Ambient operating temperature 0 °C ... +55 °C

Storage temperature –25 °C ... +70 °C

Air humidity 15 % ... 95 %, Non-condensing

Vibration resistance 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)

Shock resistance 10 g, 16 ms (EN 60068-2-29)

Other information

Wave length 950 nm

Classifications

ECl@ss 5.0 27272704

ECl@ss 5.1.4 27272704

ECl@ss 6.0 27272704

ECl@ss 6.2 27272704

ECl@ss 7.0 27272704

2018-06-16 10:36:15 | Online data sheet

Subject to change without notice

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 3

ABCDEF

HIJKLMNOPQRST

C20S-120104A11, C20E-120304A11 | C2000 StandardSAFETY LIGHT CURTAINS

ECl@ss 8.0 27272704

ECl@ss 8.1 27272704

ECl@ss 9.0 27272704

ETIM 5.0 EC002549

ETIM 6.0 EC002549

UNSPSC 16.0901 46171620

Dimensional drawing (Dimensions in mm (inch))

Protective field heights 150 mm to 1200 mm

14(0.55)

6(0.24)

2.2

(0.0

9) 10.5

(0.41)

1(0

.04

)

3.5

(0.1

4)

5

1

2

4

6

7

3

8(0.31)

9.6(0.38)

34(1.34)

19.3(0.76)

14.7(0.58)

L4

L3

L2

L5

8.4

(0.3

3)

36.4(1.43)

36(1.43)

34

.3(1

.35

)

62

(2

.44

)

51

.5 (2

.03

)

Ø 8.4(0.33)

2.3(0.09)

28.5(1.12)

L1

S1

L6

16.5(0.65)

43

.8(1

.72

)2

1(0

.83

)

Sender with swivel mount, small housing (receiver mirror image)①  Mounting clamp②  M8 hexagon screw, DIN 933 with DIN 9021 washer (not included with delivery)③  Center of light beam offset④  Adjustment⑤  Sliding nut groove for side mounting⑥  Protective field height⑦  Male connector M12, 8-pin

4 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2018-06-16 10:36:15

Subject to change without notice

C20S-120104A11, C20E-120304A11 | C2000 StandardSAFETY LIGHT CURTAINS

Connection diagramC2000 Standard to UE10-3OS safety relay

C2000S C2000R

Sel1

+24V

Sel2

EDM

OSSD1

OSSD2

GND

Shield

Sel1

+24V

Sel2

n.c.

Test

n.c.

GND

Shield

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

BN

GN

GY

BU

WH

BN

GN

GY

YE

PK

BU

WH

0 V

E117802/00/2014-06-18

+24 V DC

UE10-3OS

B1 Y1B3 13 23 33 411)

B2 Y2B4 14 24 34 42

Recommended accessoriesOther models and accessories www.sick.com/C2000_Standard

Brief description Type Part no.

Device protection (mechanical)

2 pieces, Snap-on front screen protection set (protects sensors from damage by flyingsparks and welding beads), mounting hardware included

Additional front screen 2022411

2018-06-16 10:36:15 | Online data sheet

Subject to change without notice

OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 5

ABCDEF

HIJKLMNOPQRST

C20S-120104A11, C20E-120304A11 | C2000 StandardSAFETY LIGHT CURTAINS

Brief description Type Part no.

Terminal and alignment brackets

4 pieces, Mounting kit 6, side bracket, rotatable, Zinc diecast BEF-1SHABAZN4 2019506

4 pieces, Mounting kit 1, rotatable, swivel mount, Plastic BEF-2SMKEAKU4 2019649

Plug connectors and cables

Head A: female connector, M12, 8-pin, straightHead B: Flying leadsCable: PUR, halogen-free, shielded, 5 m

DOL-127SG05ME25KM0 6020354

Head A: female connector, M12, 8-pin, straightHead B: Flying leadsCable: PUR, halogen-free, shielded, 10 m

DOL-127SG10ME25KM0 6020352

Head A: female connector, M12, 8-pin, straightHead B: -Cable: unshielded

DOS-1208-G 6028422

Alignment aids

Laser alignment aid for various sensors, laser class 2 (IEC 60825). Do not look intothe beam!

AR60 1015741

Adapter AR60 for housing cross-section 34 mm x 29 mm AR60 adapter, 34x29 4032462

Adapter AR60 for housing cross-section 34 mm x 29 mm in PU3H device column AR60 adapter,34x29, PU3H

4056730

Test and monitoring tools

40 mm diameter Test rod 40 mm 2022604

6 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2018-06-16 10:36:15

Subject to change without notice

Onlin

e da

ta s

heet

SICK AG | Waldkirch | Germany | www.sick.com

SICK At A GlAnCeSICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica-tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment.

We have extensive experience in a wide range of industries and understand their processes and require-ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner.

Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma-chine life cycle and ensure safety and productivity.

For us, that is “Sensor Intelligence.”

WOrldWIde preSenCe:Contacts and other locations – www.sick.com