bermad ir-970-m0-50-rvz
TRANSCRIPT
-
7/28/2019 BERMAD IR-970-M0-50-RVZ
1/2
Flow Control
BERMAD Irrigation900 Series
Flow Control
HydrometerMagnetic Drive
with Hydraulic Control
IR-970-M0-50-RVZ
The BERMAD Model IR-970-M0-50-RVZ integrates a
vertical turbine Woltman-type water meter with a diaphragmactuated hydraulic control valve. As the system's Flow
Meter and Main Valve, it controls irrigation together with the
irrigation controller. The BERMAD Hydrometer limits the flow
to a constant preset maximum. It either opens or shuts in
response to pressure commands.
Features and Benefits
Integrated "All-in-One" Control Valve
Saves space, cost and maintenance
Line Pressure Driven, Hydraulically Controlled On/Off
Limits fill-up rate and consumer over-demand
Magnetic Drive with Vacuum-Sealed Register
Water-free gear train mechanism
Reed-switch and Opto pulse-generating modes
Various pulse combinations
Internal Inlet & Outlet Flow Straighteners
Saves on straightening distances
Maintains accuracy
Integrated Flow Metering Calibration Device
Paddle-Type Hydro-Mechanic Flow Pilot
No added head loss Wide setting range
User-Friendly Design
Easy Flow Setting
Simple in-line inspection and service
[1] BERMAD Model IR-970-M0-55-RVZ opens in response
to an electric signal limiting fill-up rate and consumer over
demand.
[2] BERMAD Backwash Valve Model IR-3x2-350-A-I
[3] BERMAD Backwash Flow Control Valve Model IR-470-beKU
Typical Applications
Computerized Irrigation Systems
Flow Monitoring and Leakage Control
Multiple Independent Consumer Systems
Line Fill-Up Control Irrigation Machines
Filter Stations
[1]
[2][2][2]
[3]
-
7/28/2019 BERMAD IR-970-M0-50-RVZ
2/2
Flow ControlFor full technical details, refer to Engineering Section.
Technical Specifications
BERMAD Irrigation900 Series
i n f o @ b e r m a d . c o m w w w . b e r m a d . c o mThe info rmati on herein is subjec t to change wi thout not ice. BERMAD shal l no t be held liab le f orany errors. All rights reserved. Copyright by BERMAD.
Dimensions and WeightsSize DN
Inch803
1004
1506
2008
25010
L mm 300 350 500 600 600inch 11.8 13.8 19.7 23.6 23.6
Hmm 382 447 602 617 617inch 15 17.6 23.7 24.3 24.3
Cmm 290 340 450 465 465inch 11.4 13.4 17.7 18.3 18.3
Rmm 123 137 216 228 228inch 4.8 5.4 8.5 9 9
A; Bmm 305 325 390 390 415inch 12 12.8 15.4 15.4 16.3
WeightKg 23 31 71 93 141Ib. 57.7 68.3 156.5 205 310.9
,
IR-970-M0-50-RVZ
The Flow Pilot [1] commands the Hydrometer to throttle
closed should demand rise above pilot setting, and to
modulate open when demand drops. The Shuttle Valve [2]
directs the pilot command into the Hydrometer Control
Chamber [3]. Upon pressure rise command, the shuttle valve
automatically switches, allowing pressurization of the control
chamber, which causes the Hydrometer to shut.
The Manual Selector [4] enables local manual closing.
PC9AEM0-70-50R 05
Operation
12.510.0
7.5
5.0
2.5
1.5
0.15
1.0
0.75
0.5
0.25
P
psi
3
DN80
4
DN100
6
DN150
1.0
0.80.60.5
0.4
0.3
0.2
0.15
0.01
0.1
0.08
0.060.05
0.04
0.03
0.02
0.015
6 8 10 15 20 30 4 0 60 8 0 100 150 200 300 400 600Flowm3/h
Flowgpm 50 75 25
050
075
0
1000
150025
2000
250010
0150
200
300
350400
P
bar
8 & 10
DN200 & 250
Flow Chart
Technical DataPatterns and Sizes:Globe: 3-10; DN80-250
Angle 90: 3-8; DN80-200Angle 120: 4; DN100End Connections:Flanged: 3-10; DN80-250Pressure Ratings: 16 bar; 232 psiMinimum Operating Pressure:0.5 bar; 7 psiFor lower pressure requirements,consult factoryFlow Setting Range:1.0-5.0 m/sec; 3.3-16.5f/secSetting ranges vary according to specific pilot
spring. Please consult factory.
Materials:Body and Cover:Polyester Coated Cast or Ductile IronInternals:St. St. & Glass Fiber Reinforced NylonImpeller: PolypropyleneElastomers: Reinforced NR & NBRPivots and Bearings: Tungsten CarbideControl Accessories: Brass
Tubing and Fittings:
Reinforced Plastic and Brass
[2]
[1]
[4]
[3]
Globe G
Angle A
120 (4; DN100 only) H
ISO-16 16
ISO-10 10
ISO-14 (ISO-10/4 Holes) 14
ANSI-125 A1
JIS-10 J1
BST-D BD
Metal Control Accessories R
Paddle Flow Control Pilot V
Manual Selector Z
R.S. 100 Lit R02 R.S. 10 Gal RG4
R.S. 1 m3 R03 R.S. 100 Gal RG5
R.S. 10 m3 R04 R.S. 1000 Gal RG6
R.S. 100 Lit +1 m3 R23 R.S. 10+100 Gal G45
R.S. 1 m3+10 m3 R34 R.S. 100+1000 Gal G56
O.E. 1 Lit P01 O.E. 0.1 Gal PG2
O.E. 10 Lit P10 O.E . 1 Gal PG3
O.E.+R.S. 1+100 Lit PQ1 O.E.+R.S. 0.1+10 Gal P4G
O.E.+R.S. 10 Lit+1 m3 P13 O.E.+R.S. 1+100 Gal P5G
R.S. No Pulse RNP R.S. No Pulse Gal RNG
How to OrderPlease specify the requested valve in the following sequence: (for more options, refer to Ordering Guide.)
Sector Size PrimaryFeature
ControlCategories
AdditionalFeature
Pattern ConstructionMaterials
EndConnections
Coating Voltage &Position
Tubing &Fittings
DialCapacity
PulseRate
AdditonalAttributes
IRIR 970970 5050 GG 1616I PGPG -- PBPB WATWAT RVZRVZ0M0 R23R23-10"3-10"
Other attributes available on request
Plastic Tubing & Brass Fittings PB
Copper Tubing & Brass Fittings CB
R.S. = Reed-Switch O.E. = Opto-Electric
Other sizesavailable onrequest.
R.S. = Reed-Switch
O.E. = Opto-ElectricTwo parllel pulses are transmitted. other pulse rates are avaiable on request.
Pulse OptionOne pulse per
SizeLiter ; Gallon m3 ; Gallon
1; 0.1 10; 1 100; 10 1; 100 10; 1000
3-4"; DN80-100
6-10"; DN150-250
Accuracy &Flow Data (ISO 4064-1, Class B)
Size Accuracy DNinch
803
1004
1506
200 & 2508 & 10
Q min(Minimum flow)
5%m3 1.2 1.8 4 6.3
gpm 5.3 7.9 17.6 27.7Qn, ISO 4064-1(Nominal flow)
2%m3 40 60 150 250
gpm 176 264 660 1100
Qper=Q3(Permanent flow)
2%m3 100 160 250 400
gpm 440 704 1100 1760
2-Way Circuit "Added Head Loss",
(for "V" below 2 m/s; 6.5 f/s): 0.3 bar; 4.5 psi