CHARACTERISTICSProperties, Unit ValueType of fiber basaltMonofilament diameter, micron from 13 up to 30Cut length, mm from 6 up to 72Temperature range, C from -260 up to + 700Hygroscopicity, %, not more 0,2Resistance to acids and alkalis high

Moisture content (% wt)for concrete 6–10for production 0,5–0,8

Sizingwater compatible for concretes*water incompatible for the production

Packaging information polyethylene bags 10, 20 or 25 kg, big bags 250 and 500 kg.

* – fiber for concrete without sizing is available.

BENEFITSEffect of dispersed basalt fiber reinforcement: crack resistance by 2 times, Increasing the durability of concrete by 5 times, tensile strength in bending by 30-40%, frost resistance up to 500 cycles, impact strength by 5 times, compression strength by 20-50%, water resistance by 50%.

Basalt fiber provides high adhesion to concrete ( «stone-stone») without deterioration of the reinforcing properties over time; it is a corrosion resistant material that does not get inflamed even exposed to open fire, it does not bunch up when added at any time of making and pouring the mix. Basalt fiber can be used for concretes with plasticizers and agents that change the setting time.

APPLICATIONDue to excellent durability, basalt fiber is highly suitable for reinforcing concrete used when strength requirements are especially high: floors, grounds, roads with heavy traffic of people or transport. High resistance to climatic factors and hygroscopic properties make basalt fiber essential for hydraulic structures and coast protection. Basalt fiber reinforced concrete finds its application in building earthquake-proof structures, explosion hazardous facilities, reservoirs and concrete pipes used for transporting aggressive substances and liquids with great amount of abrasive particles, and nuclear and chemical facilities.Basalt fiber is a unique material for the manufacture of porous, foamed and aerated concretes, for adding into dry construction mixes to increase their plasticity, water-resistant and adhesive properties.Dry fiber with water incompatible sizing is used for the manufacture of brake pads and needle-punched mats.

BASALT FIBER

Basalt fiber is made by chopping continuous basalt fiber into short lengths. Basalt fiber is used as a reinforcing agent for concrete, plaster and plastics, providing three-dimensional strengthening.

To achieve better adhesion, uniform distribution and the maximum reinforcing effect, depending on the application area, it is necessary to select a relevant monofilament diameter, cut length, moisture content, and sizing.

+44 203 608 7068 contact@basalt.trade basalt.tradeBASALT.TRADE