ball valve

1352-SERIES Electrically Operated Ball Valve Technical Specifications

Data Sheet Ref. No : SU-1352-00001

SUDE PUNE / BANGALORE

MODEL NO.: 1352\50\40\BSP\RB\CS\S6\T\PROP\ SD-1000-05\CPT200\POT\2LS\SERVO

Quotation Ref. No Quotation Date

1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED WITH SINGLE PHASE QUARTER TURN ELECTRIC ACTUATOR

2. MAKE SUDE 3 APPLICATION Water Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 50mm Port Size 40mm End connection BSP Screwed Body Material Carbon Steel Ball Material SS316 Seating material Teflon Flowing medium Non-injurious to Body Ball & Seals

Pressure 10 Bar

Type of construction

Reduce Bore Single piece design, Antistatic fire safe

Ball valve

Temperature Ambient

Characteristic Proportionate

Fitted with

Sdtork Make Single Phase Quarter Turn Electric Actuator Supply Voltage 230 V AC.

ACTUATOR DETAILS 3.1 Model SD-1000-05 3.2 Output motion type Linear 3.3 Output Torque ( Nm ) 50 Nm 3.4 Output speed ( Sec/90 °) 17 sec/90° 3.5 Manual hand wheel PROVIDED 3.6 Travel limit switches

2 Nos Type : 1 NO + 1 NC, change over contact, contact rating: 5 A, 230 V AC

3.7 Torque limit switches Not required, AS 1000-series actuator are provided with stall duty motor

3.8 Local indicator PROVIDED 3.9 Class of Protection IP67 3.10 Weight of the actuator (Kgs.) 9 kgs. 3.11 Duty S2-10 min 3.12 Mounting 3.14 G. A. Drawing Reference No 3.15 Electrical Wiring Diagram Ref, No MOTOR DETAILS 4.1 Type Reversible Single Phase Synchronous Stall Duty Motor 4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply 4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr.

4.4 Insulation Class F 4.5 Rating ( Watts) 110 Watts OPTIONAL ACCESSORIES 5.1

Feedback Potentiometer

Out put : 100-235 Ohms Provided

5.2

Additional Limit Switches

Qty : 2 nos. Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC

Provided

5.3

Two Wire Transmitter Type : Two wire, Actuator mounted Supply : 12-36 VDC, Output : 4-20 m A

Provided

5.4

Remote Position indicator

Available in servo controller Digital : 0-100 %

Provided

5.5

Servo controller (Valve positioner) Panel Mounted

Input signal : 4-20 m A, Output : 4-20 m A Feed back : 0-500 Ohms, supply 230 V AC, This will have auto calibration facility.

Provided

5.6 Interface Card Input signal : 4-20 m A, Feed back : 100-235 Ohms,

Provided

5.7 Local Push Button Station

This will consist of Auto /Off / Manual selector switch, Open/Close push buttons.

Provided

6 GENERAL POINTS 6.1 Inspection By Customer at our works

6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation

which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated Box

SPECIAL NOTE :

1352-SERIES Electrically Operated Ball Valve Technical Specifications

Data Sheet Ref. No : SD-1352-00002


MODEL NO.: 1352\50\40\BSP\RB\CS\S6\T\ONF\ SD-1000-05\2LS


1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED WITH SINGLE PHASE QUARTER TURN ELECTRIC ACTUATOR


Pressure 10 Bar


Reduce Bore Single piece design, Antistatic fire safe

Ball valve

Temperature Ambient

Characteristic On/Off Type

Fitted with





3.8 Local indicator PROVIDED 3.9 Class of Protection IP67 3.10 Weight of the actuator (Kgs.) 9 kgs. 3.11 Duty S2-10 min 3.12 Mounting 3.14 G. A. Drawing Reference No 3.15 Electrical Wiring Diagram Ref, No MOTOR DETAILS 4.1 Type Reversible Single Phase Synchronous Stall Duty Motor 4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply

4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr. 4.4 Insulation Class F 4.5 Rating ( Watts) 110 Watts OPTIONAL ACCESSORIES 5.1


Out put : 100-235 Ohms Not Provided

5.2



Provided

5.3


Not Provided

5.4



Not Provided

5.5



Not Provided

5.6 Interface Card Actuator Mounted

Input signal : 4-20 m A, Feed back : 100-235 Ohms,

Not Provided



Not Provided




SPECIAL NOTE :

1358-SERIES Electrically Operated Plastic Ball Valve Technical Specifications



MODEL NO.: 1358\50\PVC\PVC\T\PROP\BSP\SD-1000-05\2LS\POT\SERVO\CPT200


1. ITEM ASSEMBLY OF 2 WAY PLASTIC BALL VALVE FITTED WITH SINGLE PHASE QUARTER TURN ELECTRIC ACTUATOR

2. MAKE SUDE 3 APPLICATION 6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 50mm End connection BSP Screwed Body Material PVC Ball Material PVC Seating material Teflon Flowing medium Acid

Pressure 10 Bar

Temperature Ambient


Fitted with





3.8 Local indicator PROVIDED 3.9 Class of Protection IP65 3.10 Weight of the actuator (Kgs.) 9 kgs. 3.11 Duty S2-10 min 3.12 Mounting 3.14 G. A. Drawing Reference No 3.15 Electrical Wiring Diagram Ref, No 3.16 Weight of Actuator – Kgs MOTOR DETAILS 4.1 Type Reversible Single Phase Synchronous Stall Duty Motor 4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply 4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr. 4.4 Insulation Class F 4.5 Rating ( Watts) 110 Watts OPTIONAL ACCESSORIES

5.1


Out put : 100-235 Ohms Provided

5.2



Provided

5.3


Provided

5.4



Provided

5.5



Provided

5.6 Interface Card


Provided



Provided




SPECIAL NOTE :

1358-SERIES Electrically Operated Plastic Ball Valve Technical Specifications



MODEL NO.: 1358\50\PVC\PVC\T\ONF\BSP\SD-1000-05\2LS


1. ITEM ASSEMBLY OF 2 WAY PLASTIC BALL VALVE FITTED WITH SINGLE PHASE QUARTER TURN ELECTRIC ACTUATOR


Pressure 10 Bar

Temperature Ambient


Fitted with





3.8 Local indicator PROVIDED 3.9 Class of Protection IP67 3.10 Weight of the actuator (Kgs.) 9 kgs. 3.11 Duty S2-10 min 3.12 Mounting 3.14 G. A. Drawing Reference No 3.15 Electrical Wiring Diagram Ref, No MOTOR DETAILS 4.1 Type Reversible Single Phase Synchronous Stall Duty Motor 4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply 4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr. 4.4 Insulation Class F 4.5 Rating ( Watts) 110 Watts OPTIONAL ACCESSORIES

5.1


Out put : 100-235 Ohms Not Provided

5.2



Provided

5.3


Not Provided

5.4



Not Provided

5.5



Not Provided

5.6 Interface Card Actuator Mounted


Not Provided

5.6 Control Panel

This will consist of 2 nos. of Control Relay with required control voltage (If not specify, control voltage will be 230 VAC ) Auto / Manual selector switch, Open/Close push buttons, emergency stop button & MCB.

Not Provided



Not Provided




SPECIAL NOTE :

1362-SERIES Pneumatically Operated Ball Valve Technical Specifications



MODEL NO.: 1362\50\40\BSP\RB\CS\S6\T\PROP\DA05\VP\ITP\PT


1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED PNEUMATIC ROTARY DOUBLE ACTING ACTUATOR


Pressure 10 Bar


Reduce Bore Single piece design, Antistatic fire safe Ball

valve

Temperature Ambient


Fitted with

Sude Make Pneumatic DA05 Double Acting Actuator, Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered & Clean Dry Air

4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA05 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar

4.18 Quality Of Air Filtered & Clean Dry Air 4.19 Opening and Closing Time 0.28 [Open] & 0.28 [Close] 5 OPTIONAL ACCESSORIES

5.1 Valve Positioner Input signal: 60 PSI & 3 to 15 PSI Provided 5.2 I to P Converter Input signal: 22 PSI & 4-20mA Provided 5.3 Position

Transmitter Output: 4-20mA Provided


6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of

installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated Box

SPECIAL NOTE :



SUDE

PUNE / BANGALORE

MODEL NO.: 1362\25\20\RB\S6\S6\T\ONF\FL15\DA00 \1182B\2WNCMID\06\3.1\BSP\BR\S4\BN \ONF\SPC1\230VAC\GP\1182B\2WNCMID\15\8.0\BSP\S4\S4\BN\ONF\SPC2\230VAC\GP



2. MAKE SUDE 3 APPLICATION Oil Weighing Machine 6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 25mm Port Size 20mm End connection Flanged to ASA150RF Body Material SS316 Ball Material SS316 Seating material Teflon Flowing medium Oil

Pressure 10 Bar

Type of construction Reduce Bore Single piece design

Temperature Ambient


Fitted with

Sude Make Pneumatic DA00 Double Acting Actuator, Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered and Lubricated

4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA00 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel

4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered and Lubricated 4.19 Opening and Closing Time 0.28 [Open] & 0.28 [Close] 5 OPTIONAL ACCESSORIES

5.1 Two Numbers 2 Way Midget type Direct Acting Solenoid Valve

Normally Closed Construction of ¼” size – 1 no. & ½” – 1 no. having Coil voltage of 230 V AC Supply in General Purpose Housing, Input signal: Pulse from the controller

Provided




SPECIAL NOTE :




MODEL NO.: 1362\200\150\RB\S6\S6\T\ONF\FL15\DA40\1184D\4W5P3PDCPOP\06\6.0\BSP\AL\S4\BN\SPC1\230VAC\GP\WPLSB\FRL\GB



2. MAKE SUDE 3 APPLICATION Water / Oil Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 200mm Port Size 150mm End connection Flanged to ASA150RF Body Material SS316 Ball Material SS316 Seating material Teflon Flowing medium Non-injurious to Body Ball & Seals

Pressure 10 Bar


Reduce Bore Single piece design, Antistatic fire safe Ball

valve

Temperature Ambient


Fitted with


4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA40 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel

4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered and Lubricated 4.19 Opening and Closing

Time 0.28 [Open] & 0.28 [Close]

5 OPTIONAL ACCESSORIES

5.1 4 Way 5 Port 3 position Double Coil poppet type solenoid valve

Of ¼” size having Aluminum body with Coil voltage of 230 V AC Supply

Provided

5.2 Weather Proof Limit switch box

Consisting of 2 nos micro switches having 1 NO + 1 NC contacts for sensing end position of the valve

Provided

5.3 Filter Regulator & Lubricator

Of ¼” Size supplied with Gauge Provided

5.4 Gear Box For Manual operation Provided 6 GENERAL POINTS 6.1 Inspection By Customer at our works



SPECIAL NOTE :

1368-SERIES Pneumatically Operated Plastic Ball Valve Technical Specifications

Data Sheet Ref. No : SU-1368- 00001


1368\50\BSP\PVC\PVC\T\PROP\DA05\EPPOS\FB\PT


1. ITEM ASSEMBLY OF 2 WAY PLASTIC BALL VALVE FITTED PNEUMATIC ROTARY DOUBLE ACTING ACTUATOR


Pressure 10 Bar

Temperature Ambient


Fitted with

Sude Make Pneumatic DA05 Double Acting Actuator, Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered & Clean Dry Air

4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA05 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered & Clean Dry Air 4.19 Opening and Closing

Time 0.28 [Open] & 0.28 [Close]


5.1 Siemens make Electro Pneumatic Positioner

Having Input supply: 60 PSI & 4-20mA, Output supply: 4-20mA, Inbuilt with Position Transmitter

Provided




SPECIAL NOTE :

1368-SERIES Pneumatically Operated Plastic Ball Valve Technical Specifications

Data Sheet Ref. No : SU-1368-00002 SUDE

PUNE / BANGALORE MODEL NO.: 1368\50\BSP\PVC\PVC\T\ONF\DA05\AFR\ALR\2FCV\WPLSB


1. ITEM ASSEMBLY OF 2 WAY PLASTIC BALL VALVE FITTED PNEUMATIC ROTARY DOUBLE ACTING ACTUATOR


Pressure 10 Bar

Temperature Ambient


Fitted with


4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA05 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered and Lubricated 4.19 Opening and Closing Time 0.28 [Open] & 0.28 [Close]


5.1 Air Filter Regulator Of ¼” Size supplied with Gauge Provided 5.2 Air Lock Relay Provided 5.3 Flow Control valve 2 nos for Slow opening & Slow closing Provided 5.2 Weather Proof

Limit switch box Consisting of 2 nos micro switches having 1 NO + 1 NC contacts for sensing end position of the valve

Provided


6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of

installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated Box

SPECIAL NOTE :

ball valve

Technology