2016-2017 SCHOOL YEAR

CURRICULUM GUIDE

MARION COUNTY AREA TECHNOLOGY CENTER721 EAST MAIN STREET

LEBANON, KY 40033270-692-3155

PRINCIPAL: Brandon Bardinbrandon.bardin@marion.kyschools.us

COLLEGE & CAREER ADVISOR: Amy E. Rineyamy.riney@marion.kyschools.us

“GROWING SKILLS FOR TOMORROW’S COMMUNITY”

* (Program completers must have 4 credits in chosen pathway)CONSTRUCTION CARPENTRY TECH CONSTRUCTION CARPENTRY TECH INFORMATION TECH

Carpenter Assistant TRACK Apprenticeship Cisco Network AdministrationCIP 46.0201.01 CIP 46.0201.99 CIP 11.0901.01

Intro to Construction Technology Intro to Construction Technology Computer Literacy Floor and Wall Framing Floor and Wall Framing Computer Hardware & Software Maint.

Ceiling and Roof Framing OR Construction Prints and Industrial Safety OR Site Layout and Foundations (2 credits)

Ceiling and Roof Framing Introduction Networking Concepts Site Layout and Foundation Internet Technologies Information Technology Co-op/Internship Routing Protocal and Concepts Cisco II

Computational Thinking TRACK Industry Certification CompTIA A+ or CCNA or MTA

INFORMATION TECHNOLOGY INFORMATION TECHNOLOGY INFORMATION TECHNOLOGY

Computer Programming Web Develop. & Administration Information Support & ServicesCIP 11.0201.01 CIP 11.0801.01 CIP 47.0104.01

Computer Literacy Computer Literacy Computer Literacy Computational Thinking Web Page Development Computer Hardware & Software Maint. C++1 OR Visual Basic I OR Co-op OR Internship (2 credits)

Web Site Design & Production Help Desk Operations Internet Technologies OR Computer Graphics OR Comp Thinking OR Co-op OR Internship

Internet Technologies OR Co-op OR Internship

CompTIA A+ or MTA CompTIA A+ or Strata or Adobe CompTIA A+ or Strata or MTA

HEALTH SCIENCE HEALTH SCIENCE HEALTH SCIENCE Allied Health Pharmacy Technician Pre-Nursing

CIP 51.0000.01 CIP 51.0805.01 CIP 51.2699.01 Principles of Health Science Principles of Health Science Principles of Health Science Emergency Procedures/Med Term I Emergency Procedures/Med Term I Emergency Procedures/Med Term I Allied Health Core Skills Internship: Pharmacy Technician Medicaid Nurse Aide Internship: Allied Health OR Medical Math Medical Math

Intern: Advanced Allied Health Core Skills OR Medical Math

Medicaid Nurse Aide

INDUSTRIAL MAINTENANCE WELDING TECHNOLOGY COMPUTER AIDED DESIGN

Maintenance Mechanic Welder-Entry Level Mechanical DesignerCIP 47.0303.01 CIP 48.0508.01 CIP 15.1301.02

Fluid Power Blueprint Reading for Welding Introduction to Computer Aided Drafting Industrial Main. Electrical Princ Shielded Metal Arc Welding Parametric Modeling Maintain Ind. Equipment Cutting Processes Engineering Graphics I.M. Electrical Motor Controls OR GMAW Groove Lab OR PLTW IED OR

Gas Metal Arc Welding Special Problems OR PLTW IED OR Mechanical

Design OR Intern I OR Co-op I

PLTW IED OR Machine Tool A Welding Certification

COMPUTERIZED MANUFACTURING & MACHINING TECHNOLOGY AUTOMOTIVE TECHNOLOGY NOTES

Machinist Operator Auto Maint & Light Repair TechnicianCIP 48.0503.02 CIP 47.0604.01

Fundamentals of MT A AM&LR Section A/ Lab Fundamentals of MT B AM&LR Section B/ Lab Applied Machining I AM&LR Section C/ Lab Blueprint Reading (CAD) OR Applied Machining II OR Intro to CAD OR PLTW IED

AM&LR Section D/ Lab

NIMS Certification ASE Certification

219901 Introduction to Engineering Design (PLTW) • 470913 Fundamentals of Machine Tools-A • 470914 Fundamentals of Machine Tools-B • 470915 Manual Programming • 219904 Computer Integrated Manufacturing (PLTW

MANUFACTURING TECHNOLOGY MANUFACTURING TECHNOLOGY

Welding Engineering Design EngineeringIntro to Engineering Design (PLTW) Intro to Engineering Design (PLTW) Blueprint Reading for Welding/ Lab Introduction to CAD Cutting Processes/ Lab Drafting Fundamentals Gas Metal Arc Welding/ Lab Mechanical Design Principles of Engineering (PLTW) Engineering Design & Development

MANUFACTURING TECHNOLOGY MANUFACTURING TECHNOLOGY

Automotive Engineering Computerized Manufacturing & Machining Engineering

Intro to Engineering Design (PLTW) CIP 415.1304.00AM&LR Section A/ Lab Intro to Engineering Design (PLTW) AM&LR Section B/ Lab Fundamentals of MT A AM&LR Section C/ Lab Fundamentals of MT B AM&LR Section D/ Lab

Manual Programming Digital Electronics (PLTW)

Computer Integrated Manuf. (PLTW) MANUFACTURING TECHNOLOGY MANUFACTURING TECHNOLOGY

Architectural Engineering CMM EngineeringIntro to Engineering Design (PLTW) Intro to Engineering Design (PLTW) Intro to Construct. Carpentry & Lab Fundamentals of MT A Floor & Wall Framing & Lab Fundamentals of MT B Ceiling & Roof Framing & Lab Manual Programming Civil Engineering & Archit. (PLTW) Computer Integrated Manuf. (PLTW)

Career ChoicesCredit-1 (1 Block-1 Semester)Grade Level-FRESHMAN ONLYThis course is designed for 9th grade students and introduces them to a broad range of career opportunities available in the local community. Course content focuses on orientation and exploration in 8 career clusters, employability skills and work ethics. Students will spend 2 weeks in each program offered at the ATC and will be provided and overview of the trade. Some classes will have hands on activities in the lab and students will create projects they can take with them after the 2 weeks. Opportunities for student interaction with professionals will be provided through guest speakers.

AUTOMOTIVE TECHNOLOGYDavid Gerhardt, Instructor

Automotive Maintenance and Light Repair Technician (CIP 47.0604.01)1. Automotive A- 4705072. Automotive B- 4705093. Automotive C- 4705114. Automotive D- 4705135. Internship- 4705046. CO-OP)- 470501

AUTOMOTIVE ACredit: 2 (1 Block-All year)Grade Level: 9-12Lab Fee-$20This course involves the operational theory and application of hydraulic and anti-lock brake systems; disc and drum brakes are discussed. This course develops skills in the diagnosis and repair of braking systems. This course is offered as dual credit with KCTCS for grades 11-12. Safety glasses provided.

AUTOMOTIVE BCredit: 2 (1 Block-All year)Grade Level: 9-12 Lab Fee-$20This course presents the automotive suspension system, the diagnosing of suspension problems, identifying components, recognizing tire wear problems, wheel balancing and the use of alignment equipment. This course develops skill in the diagnosis and repair of automotive suspension systems, wheel alignment, and wheel balancing. This course is offered as dual credit with KCTCS for grades 11-12. Safety glasses provided.

AUTOMOTIVE CCredit: 2 (2 Blocks-1 Semester)Grade Level: 9-12Prerequisite: Automotive A or B Lab Fee-$20This course introduces the student to the principles, theories, and concepts of the automotive electrical system that includes unique diagramming, coding, and locating of wiring and component devices. Students will demonstrate the ability to write work orders and warranty reports. Safety glasses provided.

AUTOMOTIVE D(AUT 140/141) (AUT 240/241) (ADX 260/261) (AUT 142/143)Credit: 2 (2 Blocks-1 Semester)Grade Level: 11-12Prerequisite: Automotive A or BLab Fee-$20A course designed for the student who has demonstrated the ability for an upper level course. Course is 2 blocks/2 semesters and includes Basic Fuel & Ignition, Computer Control Systems, Electrical Systems and Emission systems. Safety glasses provided.

CO-OP I (AUT199 Credit: 1 (1 Block, 1 Semester) Grade Level: 11-12Prerequisite: Completion of 3 credits of Automotive Tech and Instructor approvalCo-op provides supervised on-the-job work experience related to the student's educational objectives. Students who participate in the Cooperative Education program receive compensation for their work.

CO-OP II (AUT299) Credit: 2 (2 Blocks, 1 semester OR 1 block all year) Grade Level: 12 Prerequisite: Completion of 3 credits of Automotive Tech and Instructor ApprovalCo-op provides supervised on-the-job work experience related to the students educational objectives. Students who participate in the Cooperative Education program receive compensation for their work.

INTERNSHIP I (AUT198) Credit: 1 (1 block, 1 semester) Grade Level: 11-12Prerequisite: Instructor ApprovalProvides supervised on the job work experience related to the students educational objectives.

INTERNSHIP II (AUT298) Credit: 2 (2 blocks, 1 semester OR 1 block all year)Grade Level: 11-12Prerequisite: Instructor ApprovalProvides supervised on the job work experience related to the students educational objectives.

COMPUTER AIDED DESIGNJason Spalding-Instructor

Mechanical Designer (CIP 15.1301.02)1. Intro to Computer Aided Drafting- 4801102. Parametric Modeling- 4801363. Engineering Graphics- 4801134. Mechanical Design- 480135

5. Computer Integrated Manufacturing

6. Blueprint Reading for Machinist- 470921

7. Blueprint Reading for Welding- 480505

8. Drafting Fundamentals-

9. Internship- 480145

10. Special Problems- 480179

11. Co-Op- 480142

INTRO TO COMPUTER AIDED DRAFTING (CAD 100)Credit: 1 (1 period-1 semester)Grade Level: 9-12Lab Fee-$20 Uses computer graphic workstation in the application of fundamental principles and capabilities of CAD, basic drafting conventions, and operations. An in-depth study of computer aided drafting commands, terminology, command utilization, and skill development.

PARAMETRIC MODELING (CAD 201)CREDIT: 1 (1 period-1 semester)GRADE LEVEL: 9-12Lab Fee-$20 Introduces Parametric Modeling and Design of a CAD workstation in exploring the techniques associated with drafting and design using Parametric modeling software. Introduces creation of parametric models and explores associative function and flexibility of concurrent part design.

ENGINEERING GRAPHICS (CAD 112)Credit: 1 (1 period-1 semester)Grade Level: 10-12Lab Fee-$20 Includes exploration of lines and planes as they relate to orthographic projection to show the size and shape of objects. Includes application of principles and graphic elements of sectioning to show interior detail; the techniques involved in creating oblique projections, axonometric projections, and perspective drawings; and the dimensioning techniques and symbol usage common to all drafting disciplines.

MECHANICAL DESIGN (CAD 222) CREDIT: 1 (1 period-1 semester)GRADE LEVEL: 9-12Lab Fee-$20 Explores the design process involved in the development of mechanical working drawings and the design principles in various manufacturing disciplines; gear drawing and design, and cam and follower drawing and design. Design principles, mechanical adaptation, and their drawing practices. Mechanical assemblies, machine design, power transmission, bearings, and seals in assemblies. Shop processes involved in these mechanical designs.

COMPUTER INTEGRATED MANUFACTURINGCredit:1 (1 period-1 semester)Grade Level: 11-12

Lab Fee-$15This course builds on computer solid modeling skills developed in the Introduction to Engineering Design Course. Students use CAD software to design and develop a product and use CNC equipment to produce a mock-up or prototype. Fundamental concepts of computer integrated manufacturing (CIM) such as concurrent engineering, robotics, and cellular manufacturing are applied during the product development process.

BLUEPRINT READING FOR MACHINIST(BRX 110)CREDIT: 1 (1 period-1 semester)GRADE LEVEL: 9-12Basic applied math, lines, multi-view drawings, symbols, various schematics and diagrams, dimensioning techniques, sectional views, auxiliary views, threads and fasteners, and sketching typical to all shop drawings are presented. Safety will be emphasized as an integral part of the course.

BLUEPRINT READING FOR WELDING (WEL170/171)Credit: 1 (1 period-1 semester)Grade Level: 9-12This course provides a study of occupationally specific prints for welders. Advanced study of multi-view drawings, assembly drawings, datum dimensions, numerical control drawings, sheet metal prints, casings and forgings, instrumentation and control charts and diagrams, working drawings, geometric dimensioning and use of reference materials and books are included. Occupational specifics include welding drawings, symbols, and specification interpretations are stressed. This course provides students with practice fabricating from a blueprint.Students will read and fabricate from detail prints, control distortion during fabrication, and follow the proper sequence in welding a fabricated part. Students will use welding symbols and study weld sizes and strengths.

DRAFTING FUNDAMENTALS (CAD 102)CREDIT: 1 (1 period-1 semester)GRADE LEVEL: 9-12 LAB FEE $20Explores drafting and its processes: use and maintain equipment and supplies; determine line weights; measure and read line lengths with drafting scales; measure angles; and draw lines, circles, arcs, and irregular curves. Freehand and mechanical lettering, geometric construction, freehand sketching, and beginning orthographic projection. Characteristics of lines and planes in orthographic projection and the principles applied to show the size and shapes of projects. Dimensioning techniques for orthographic drawings.

INTERNSHIP I (CAD 198)Credit: 1 (1 period-1 semester)Grade Level: 11-12Internship provides supervised on-the-job work experience related to the student's educational objectives. Students participating in the Practicum do not receive compensation.

SPECIAL PROBLEMS (CAD 293)CREDIT: 1 (1 period-1 semester)GRADE LEVEL: 11-12Allows the student to gain intermediate experience in their perspective fields through projects and tasks assigned by the instructor and based on applications the student may one day experience as a professional. Sets the foundation for more in-depth projects that will be included in the student's future portfolio. Focuses on various assignments and curriculum as determined by the program instructor.

CO-OP I (CAD 199)CREDIT: 1 (1 period-1 semester)GRADE LEVEL: 12 Cooperative Education provides supervised on-the-job work experience related to the student's educational objectives.

Students participating in the Cooperative Education program receive compensation for their work.

CONSTRUCTION CARPENTRY TECHNOLOGYDanny Taylor, Instructor

Carpenter Assistant (CIP 46.0201.01)

1. Intro to Construction- 4602012. Cabinet Making- 4602093. Site Layout- 4602144. House Construction (Ceiling and Roof/Floor and Wall Framing)- 460213/ 4602125. Internship- 4602456. Co-Op- 460242

INTRO TO CONSTRUCTION CARPENTRY/LAB (CAR126/127)Credit: 1 (1 Block-1 Semester) Grade Level: 9-12Lab Fee $20 This course emphasizes the types, grades, sizes and standards of building materials including the types of fasteners and their correct uses. Students will also learn to correctly utilize and maintain commonly used hand and power tools. Safety in the lab and on the job site is stressed.

CABINET CONSTRUCTION & INSTALLATION (CAR240)Credit: 2 (2 Blocks-1 Semester)Grade Level: 10-12Lab Fee $20 Prerequisite: Intro to ConstructionStudents will lay-out and plan the construction of base and wall cabinets. They will construct, sand, and prepare wood surfaces for finishing, installing cabinets, and special units.

SITE LAYOUT/FOUNDATIONS/LAB (CAR140)Credit: 2 (2 Blocks, 1 Semester) Grade Level: 10-12Lab Fee $20 Prerequisite: Intro to ConstructionStudents will prepare materials, calculate the cost for a building site, and lay out a site with a transit, locating property lines and corners. Students calculate the amount of concrete needed for footing and foundation walls and construct different types of foundations and forms.

HOUSE CONSTRUCTION:FLOOR & WALL FRAMING (CAR190/191)CEILING & ROOF (CAR196/197)Credits: 3 (3 Blocks, 1 Semester)Grade Level: 10-12Prerequisite: Intro & Instructor ApprovalStudents will complete tasks from the above 2 courses by building a house off-site.

CO-OP I CARPENTRY (CAR199)Credit: 1 (1 Block, 1 Semester)Grade Level: 11-12Prerequisite: 2 Carpentry Credits & Instructor ApprovalCo-Op provides supervised on the job work experience related to the student’s educational objective.

CO-OP II CARPENTRY (CAR299)Credit: 2 (2 Blocks, 1 Semester OR 1 Block all year)Grade Level: 11-12Prerequisite: 2 Carpentry Credits & Instructor ApprovalCo-Op provides supervised on the job work experience related to the student’s educational objective.

INTERNSHIP I (CAR198) Credit: 1 (1 Block, 1 Semester)

Grade Level: 11-12Prerequisite: 2 Carpentry Credits & Instructor ApprovalThis course includes various Construction Carpentry Technology topics, issues, and trends.

INTERNSHIP II (CAR298) Credit: 2 (2 Blocks, 1 Semester OR 1 Block all year) Grade Level: 11-12Prerequisite: 2 Carpentry Credits & Instructor ApprovalThis course includes various Construction Carpentry Technology topics, issues, and trends.

INDUSTRIAL MAINTENANCE TECHNOLOGYJason Tatum, Instructor

Career PathwayMaintenance Mechanic (CIP 47.0303.01)

1. Electrical Principles (IMT110/111)- 4703222. Motor Controls (IMT220/221)- 4703483. Maintaining Equipment (IMT150/151)- 4703184. Fluid Power (FPX100/101)- 470321

INDUSTRIAL MAINTENANCE ELECTRICAL PRINCIPLES/LAB ( IMT110/111) Credit: 1 (1 Block-1 Semester) Grade Level: 9-12 Lab Fee $20This course is the prerequisite for ALL Industrial Maintenance classes. This course introduces the theory of electricity and magnetism and the relationship of voltage, current, resistance, and power in electrical circuits. The course is designed to develop an understanding of alternating and direct current fundamentals. Students will apply formulas to analyze the operation of AC and DC circuits. The basic AC and DC lab course allows the student to verify basic theory by creating measurements and working AC and DC circuits. Various types of circuits are constructed and their parameters measured. The use of test equipment, safety and troubleshooting are stressed.

MAINTAINING INDUSTRIAL EQUIPTMENT/LAB(IMT150/151) Credit: 1 (1 Block-1 Semester)Grade Level: 10-12Lab Fee $20Prerequisite: Electrical PrinciplesThis course is designed to introduce the student to maintenance techniques and procedures used to maintain industrial equipment. This course is designed to provide the student with lab experience in the maintenance of industrial equipment.

INDUSTRIAL MAINTENANCE ELECTRICAL MOTOR CONTROLS I ( IMT220/221 )Credit: 1 (1 Block-1 Semester)Grade Level: 10-12Lab Fee $20Prerequisite: Electrical PrinciplesThis course addresses the diversity of electric motor control devices and applications used in industry today with safety and electrical lockouts included. This course addresses the diversity of control devices and applications used in industry today. Safety and electrical lockouts are also included.

FLUID POWER/LAB ( FPX100/101 )Credit: 1 (1 Block-1 Semester)Grade Level: 10-12Lab Fee $20Prerequisite: Electrical PrinciplesThis course is a study of fluid power theory, component identification and application, schematic reading, and basic calculations related to pneumatic and hydraulic systems and their operations. This course provides practical experiences in the study of fluid power theory, hydraulics and pneumatics component identification, schematic reading, and basic calculations related to hydraulic and pneumatic systems and their operations. This course of offered as dual credit with KCTCS for grades 11-12.

INTERNSHIP (IMT198) Credit: 1 (1 Block, 1 Semester)Grade Level: 11-12Prerequisite: Instructor ApprovalThe Practicum provides supervised on-the-job work experience related to the student’s educational objectives. Students participating in the Practicum do not receive compensation.

CO-OP I (IMT199) Credit: 1 (1 Block, 1 Semester)Grade Level: 11-12 Prerequisite: 3 Credits of Industrial Maintenance Technology and Instructor Approval Co-op provides supervised on-the-job work experience related to the student's educational objective. Students participating in the Co-op Education program receive compensation for their work.

INFORMATION TECHNOLOGYAnita Milburn, Instructor

Career Pathways: Information Support & Services (CIP 47.0104.01)

Web Development/ Administration (CIP 11.081.01)

Cisco Network Administration (CIP 11.0901.01)Computer Programming (CIP 11.0201.01)

1. Computer Literacy (CIT 105)- 1101102. Computer Hardware and Software Maintenance (CIT 111)- 1101013. Help Desk Operations (CIT 232)- 1101024. Internet Technologies (CIT 150)- 1109175. Information Technology Co-op (CIT 199)- 1109186. Information Technology Internship (CIT 290)- 1109197. Web Page Development (CIT 155)- 1108018. Web Site Design and Production (CIT 157)- 1108049. Computer Graphics (CIT 030)- 11021310. Computational Thinking (CIT 120)- 11025111. Introduction Networking Concepts (CIT 161)- 11090212. Routing Protocol and Concepts Cisco II (CIT 167)- 11090313. Visual Basic I (CIT 148)- 11020714. Programming Introduction: C++ (CIT 142)- 11020115. Special Topics in Information Support Services (CIT 299)- 110316

Computer Literacy 110110 (CIT 105) Credit:  1 (1 period-1 semester) Grade Level:  9-12Introduces students to the main components of computer literacy including Computer Fundamentals, Key Applications and Living Online. Provides an introduction to the computer and the convergence of technology as used in today's global environment. Introduces topics including computer hardware and software, file management, the Internet, e-mail, the social web, green computing, security and computer ethics. Presents basic use of application, programming, systems and utility software. Basic keyboarding skills are strongly recommended.

Computer Hardware & Software Maintenance 110101 (CIT 111) Credit: 1 (1 period-1 semester) Grade Level: 10-12 Prerequisite: CIT 105 or Consent of Instructor Focuses on the design of computing systems, including instruction in the principles of computer hardware and software components, algorithms data bases, telecommunications, etc. Includes the knowledge to identify and explain PC components, setup a basic PC workstation, conduct basic software installation, identify compatibility issues and recognize/prevent basic security risks and also gives knowledge in the areas of Green IT and preventative maintenance of computers.

Help Desk Operations 110102 (CIT 150) Credit:  1 (1 period-1 semester) Grade Level: 10-12 Prerequisite: CIT 105  & CIT 111 or Consent of Instructor Introduces a variety of tools and techniques to provide user support in help desk operations. Explores help desk concepts, customer service skills, troubleshooting problems, writing for end users, help desk operations and software, needs analysis, facilities management, and other topics related to end user support.

Web Page Development 110801 (CIT 155) Credit:  1 (1 period-1 semester) Grade Level:  10-12 Prerequisite:  CIT 105 or Consent of Instructor Web Page Design using HTML will be introduced. Creating web documents using a simple text editor will be the main focus. How to use a simple web editor will also be covered. Features such as layout, tables, images, forms, frames and the incorporation of sound and video will be explored. Developing site specifications and methods to increase the appeal and effectiveness of web sites are included. How to prepare web documents appropriate for use in business and professional web sites will be covered.  Also, this course introduces CSS and emphasizes W3C web design and accessibility standards.

Web Site Design and Development 110804 (CIT 157) Credit:  1 (1 period-1 semester) Grade Level:  10-12 Prerequisite:  CIT 105 or Consent of Instructor

This course gives the student an experience with advanced topics in planning and implementing a professional web site. Emerging technologies will be explored in creating interactive web pages that incorporate cascading style sheets, DHTML, JavaScript, multimedia, and graphics. Designing for a cross browser web site and different monitor resolutions should be covered. Introduces web site production processes with emphasis on design involving layout, navigation, interactivity and using web production software.

Computer Graphics 110213 (CIT 030) Credit:  1 (1 period-1 semester) Grade Level:  10-12 Prerequisite:  CIT 105 or Consent of Instructor This course introduces students to the trends, theory and methods of digital media for traditional print and electronic publication, including pixel-based and vector graphics, principles of media design, and conceptualization and translation of ideas into visual form.

Internet Technologies 110917 (CIT 150) Credit:  1 (1 period-1 semester) Grade Level:  10-12 Prerequisite:  CIT 105 or Consent of Instructor Provides students with a study of traditional and emerging Internet technologies. Covers topics including Internet fundamentals, Internet applications, Internet delivery systems, and Internet client/server computing. Provides a hands-on experience and some programming in an Internet environment.

Network Fundamentals (Cisco I) 110902 (CIT161) Credit:  1   (1 period-1 semester) Grade Level:  10-12 Prerequisite:  CIT 105 or Consent of Instructor Introduces the architecture, structure, functions, components, and models of the Internet and other computer networks. Provides the opportunity to build simple LAN topologies by applying principles of cabling, performing basic configurations of network devices, including routers and switches, and implementing IP addressing schemes.  Completes one of a series of four courses that helps prepare students for the Cisco Certified Network Associate (CCNA) certification exam and the Cisco Certified Entry Networking Technician (CCENT).(This is the first course in the Cisco Curriculum.)

Routing Protocols and Concepts – Routing and Switching Essentials (Cisco II) 110903 (CIT 167) Credit:  1  (1 period-1 semester) Grade Level:  10-12 Prerequisite:  CIT 105, CIT 161, or Consent of Instructor Provides students with the skills necessary to understand and apply concepts related to networking routing and switching hardware. Covers TCP/IP concepts such as IP addressing and subnetting, router configuration, routed and routing protocols. Completes one of a series of four courses that helps prepare students for the Cisco Certified Network Associate (CCNA) certification exam and the Cisco Certified Entry Networking Technician (CCENT). (This is the second course in the Cisco Curriculum.)

Computational Thinking 11025 (CIS 120) (Online Independent Study Course) Credit:  1 (1 period-1 semester) Grade Level:  11-12 Prerequisite:  CIT 105 or Consent of Instructor Students analyze the structure of the world wide web, apply basic principles of web documents and HTML, and develop multi-media web pages. Course content will include the understanding of hypertext and web structures. Equipment such as scanners, digital and video cameras, and sound recording devices will be utilized through hands-on instruction. Promotes understanding of computer programming and logic by teaching students to "think like a computer". Covers skills needed to develop and design language-independent solutions to solve computer related problems. Covers developmental and design basics including use of variables, control and data structures, and principles of command-line and object-oriented languages end user support.

C++ Programming I 110202 (CIS 142) (Online Independent Study Course) Credit:  1 (1 period-1 semester) Grade Level:  11-12 Prerequisite:  CIT 105, Introduction to Computing, CIT 120, Computational Thinking and the dedication to work independently. Consent of Instructor Introduces students to fundamental programming concepts using the C++ programming language. Topics include data types, control structures, simple data structures, error-handling, modular programming, and information and file processing.

Visual Basic I 110207 (CIT 148) (Online Independent Study Course) Credit:  1 (1 period-1 semester) Grade Level:  11-12 Prerequisite:  CIT 105, Introduction to Computing, CIT 120, Computational Thinking and the dedication to work independently. Consent of Instructor Introduces students to fundamental programming concepts using the Visual Basic programming language. Topics include data types, control structures, simple data structures, error-handling, modular programming, event-driven programming, graphical user interfaces, and file processing.

Special Topics in Information Support Services 110152 (CIT299) Credit:  1  (1 period-1 semester)                   Grade Level:  11-12                 Prerequisite:  CIT 105 and Consent of Instructor  This course will deal with independent study concepts and/or skills from special areas of interest in computer information systems.

Information Technology Co-op 110918 (CIT 199) Credit:  1 (1 period-1 semester) Grade Level:   12 Prerequisite: CIT 111 and CIT 161 or CIT 155 and CIT157 Cooperative Education for CTE courses provide supervised work site experience related to the student’s identified career pathway. A student must be enrolled in an approved capstone course during the same school year that the co-op experience is completed. Students who participate receive a salary for these experiences, in accordance with local, state and federal minimum wage requirements according to the Work Based Learning Guide.

Information Technology Internship 110919 (CIT 290) Credit:  1 (1 period-1 semester) Grade Level:   12 Prerequisite: CIT 111 and CIT 161 or CIT 155 and CIT157 Internship for CTE courses provide supervised work-site experience for high school students who are enrolled in a capstone course associated with their identified career pathway. Internship experiences consist of a combination of classroom instruction and field experiences. A student receiving pay for an intern experience is one who is participating in an experience that lasts a semester or longer and has an established employee-employer relationship. A non-paid internship affects those students who participate on a short-term basis (semester or less). All information referenced to the Work Based Learning Guide.

MACHINE TOOL TECHNOLOGYChris Sublett, Instructor

Machinist Operator (CIP 48.0503.02)1. Machine Tool A- 4709132. Machine Tool B- 4709143. Applied Machining I- 4709114. Applied Machining II- 470912

5. Manual Programming- 4709156. Intro to CAD- 4801107. Internship- 4709328. CO-OP- 470929

FUNDAMENTALS OF MACHINE TOOL A ( MTT110 ) Credit: 1 (1 Block-1 Semester)Grade Level: 9-12 Lab Fee-$20This course provides the basic principles needed for a solid foundation in machine tool technology. Areas and machines covered include shop safety, bench work, drill press, power saw, measurement, mills and lathes. This course is offered as dual credit with KCTCS for grades 11-12.

FUNDAMENTALS OF MACHINE TOOL B (MTT112)Credit: 2 (2blocks, 1 Semester)Grade Level: 10-12 Prerequisite: MTT 110 Fundamentals of Machine Tool ALab Fee-$20This course provides the basic principles needed for a solid foundation in machine tool technology. Areas and machines covered include shop safety, bench work, drill press, power saw, measurement, mills and lathes. This course is offered as dual credit with KCTCS for grades 11-12.

APPLIED MACHINING I ( MTT120 ) Credit: 2 (2 blocks, 1 semester)Grade Level: 10-12 Prerequisite: MTT112 Fundamentals of Machine Tool BLab Fee-$20Applications in milling, lathe, bench work, and utilizing gauge blocks and the sine bar are covered in this course. Surface grinding and abrasives are introduced and properties of metals are discussed. This course is offered as dual credit with KCTCS for grades 11-12.

APPLIED MACHINING II ( MTT122 ) Credit: 2 (2 Blocks, 1 semester) Grade Level: 10-12Prerequisite: Applied Machining I Lab Fee-$20Applications in milling, lathe, bench work, and utilizing gauge blocks and the sine bar are covered in this course. Surface grinding and abrasives are introduced and properties of metals are discussed.

MANUAL PROGRAMMING Credit: 1 (1 Block, 1 Semester)Grade Level: 11-12Pre-requisite: Applied Machining IILab Fee $20This course introduces the student to CNC format and the Cartesian Coordinate System. It also introduces the student to CNC codes and programming, set-up, and operation of CNC machine tools. The student will utilize process planning and manual programming for CNC equipment. The student

will load a CNC program and set tool and work offsets.

CO-OP I ( MTT199 ) Credit: 1 (1 Block, 1 Semester) Grade Level: 11-12 Prerequisite: 5 Credits of Machine Tool TechnologyCo-op provides supervised on-the-job work experience related to the student's educational objectives. Students participating in the Co-op Education program receive compensation for their work.

CO-OP II ( MTT299 ) Credit: 2 (2 Blocks, 1 Semester OR 1 Block all year)Grade: 11-12 Prerequisite: Completion of MTT CO-OP I Co-op provides supervised on-the-job work experience related to the student's educational objectives. Students participating in the Co-op Education program receive compensation for their work.

CO-OP III ( MTT499 ) Credit: 3 (3 Blocks, 1 Semesters)Grade Level: 12Prerequisite: Completion of MTT CO-OP II Co-op provides supervised on-the-job work experience related to the student's educational objectives. Students participating in the Co-op Education program receive compensation for their work.

INTERNSHIP I (MTT198) Credit: 1 (1 Block, 1 Semester)Grade Level: 11-12Prerequisite: Teacher ApprovalThis course provides on the job work experience in machine tool.

INTERNSHIP II (MTT298) Credit: 2 (2 Blocks, 1 Semester OR 1 Block all year)Grade Level: 11-12Prerequisite: Teacher ApprovalThis course provides on the job work experience in machine tool.

HEALTH SCIENCESMary Jo Clark & Buffy Ryan, Instructors

Career Pathways: Allied Health (CIP 51.0000.01)

Pharmacy Technician (CIP 51.0805.01)Pre-Nursing (CIP 51.2699.01)

1. Allied Health Core Skills (1 credit)- 1705012. Body Structure and Function (Anatomy) (AHS109) (1 credit)- 1701673. CO-OP (Nursing) (HEA299) (1 credit)- 1706014. Emergency Procedures (CPR100, SFA100) (0.5 credit)- 1701415. Internship: Allied Health (1 credit)- 1705506. Internship: Pharmacy Technician (1-2 credits)- 1705587. Leadership Dynamics (0.5 credit)- 1701998. Medicaid Nurse Aide (MNA100) (2 credits)- 1706319. Medical Math (FMH100) (0.5 credits)- 17016910. Medical Terminology I (AHS120) (0.5 credit)- 17013111. Medical Terminology II (AHS115) (1 credit)- 17013212. Principles of Health Science (HEA102, WPP200) (1 credit)- 170111

ALLIED HEALTHCIP 51.0000.01PATHWAY DESCRIPTIONA general, introductory, undifferentiated, or joint program in health services occupations that prepare individuals for either entry into specialized training programs or for a variety of concentrations in the allied health area. Includes instruction in the basic sciences, research and clinical procedures, and aspects of the subject matter related to various health occupations Complete 3 courses from the following: * Principles of Health Science 170111 * Emergency Procedures 170141 AND Emergency Procedures 170141 *Allied Health Core Skills 170501 Choose 1 Credit from the following: *Body Structures and Functions 170167 *Medical Math 170169 *Internship: Allied Health 170550

PHARMACY TECHNICIAN PATHWAYCIP 51.0805.01PATHWAY DESCRIPTION A program that prepares individuals, under the supervision of pharmacists, to prepare medications, provide medications and related assistance to patients, and manage pharmacy clinical and business operations. Includes instruction in medical and pharmaceutical terminology, principles of pharmacology and , drug identification, pharmacy laboratory procedures, prescription interpretation, patient communication and education, safety procedures, recordkeeping, measurement and testing techniques, pharmacy business operations, prescription preparation, logistics and dispensing operations, and applicable standards and regulations.Complete 3 courses from the following: * Principles of Health Science 170111 * Emergency Procedures 170141 AND Emergency Procedures 170141 *Internship: Pharmacy Technician 170558 Choose 1 Credit from the following: *Body Structures and Functions 170167 *Medical Math 170169 *Allied Health Core Skills 170501

PRE-NURSINGCIP 51.2699.01PATHWAY DESCRIPTIONA program that prepares individuals for admission to a professional program in NursingComplete 3 courses from the following: * Principles of Health Science 170111 * Emergency Procedures 170141 AND Emergency Procedures 170141 * Medicaid Nurse Aide 170631 Choose 1 Credit from the following: *Body Structures and Functions 170167

*Medical Math 170169 * CO-OP (Nursing) 170601

ALLIED HEALTH CORE SKILLS 170501Credit: 1Grade Level: 11-12Prerequisites: Principles of Health Science, Medical Terminology I, and Emergency Procedures.Allied Health Core Skills is designed to provide knowledge, concepts and psychomotor skills necessary for gainful employment as an entry level health care worker. Assisting students in selecting a career major, classroom instruction and educational objectives are combined with learning experiences observations and workbased learning and opportunitysuch as internship, shadowing, or clinical rotation. This course is designed for students not enrolled in the Medicaid Nurse Aide program

BODY STRUCTURES AND FUNCTIONS (FORMERLY BASIC ANATOMY AND PHYSIOLOGY (AHS109) 170167Credit: 1Prerequisites: Principles of Health Science, Medical Terminology, and Emergency ProceduresGrade Level: 11-12Body Structures and Functions (formerly Basic Anatomy and Physiology) is designed to provide knowledge of the structure and function of the human body with an emphasis on normalcy. The interactions of all body systems in maintaining homeostasis will promote an understanding of the basic human needs necessary for health maintenance Academic knowledge from life science core content as it relates to the human body will be included. Laboratory activities should be a part of the course when appropriate. Supplies: Notebook, binder, index cards, pens/pencils

CO-OP (NURSING) (HEA199) 170601Credit: 1 (1 Semester, 1 Block) Grade Level: 12 Prerequisite: Principles of Health Science, Medical Terminology, Emergency Procedures, Medicaid Nurse Aide and Teacher Approval. Student must have a valid driver’s license and vehicle to travel to site. Cooperative Education provides supervised on the job work experience related to the student's educational objectives. Students participating in the Cooperative Education program receive compensation for their work. Work based learning is designed to complement the classroom instruction. Students will be required to follow program and agency requirements for attendance and health screenings. These may include but are not limited to: drug screens, TB skintest, and immunization certificates. Course Costs: Liability Insurance $30.00, Drug Testing $35.00, Criminal Background Check $25.00

EMERGENCY PROCEDURES (CPR FOR HEALTHCARE PROFESSIONALS/ SAFETY AND FIRST AID (CPR100, SFA100) 170141Credit: ½ (Paired with Med. Term. for 1 credit)Grade Level: 10-12This course will focus on potential emergency situations. It is designed to promote an understanding of standard precautions necessary for personal and professional health maintenance and infection control. Upon successful completion of the course, the student will demonstrate the necessary skills in First Aid and Cardiopulmonary Resuscitation (CPR) and will be given the opportunity to take the completion examination as outlined by the sponsoring agency. Supplies: Notebook, binder, index cards, pens/pencils. Cost: $10 for CPR card

INTERNSHIP: ALLIED HEALTH 170550Credit: 1 (1 semester, 1 block) Grade Level: 12Prerequisite: Principles of Health Science, Medical Terminology I, Emergency Procedures, and Teacher Approval. Must have a valid driver’s license and vehicle to travel to site.The internship provides supervised on thejob work experience related to the students’ education objectives. Workbased learning is designed to complement the classroom instruction. Students will be required to follow program and agency requirements for attendance and health screenings. These may include but are not limited to: drug screens, TB skin test, and immunization certificates . Course Costs: Liability Insurance $30.00, Drug Testing $35.00, and Criminal Background Check $25.00

INTERNSHIP: Pharmacy Technician 170558 Credit: 2 (2 Blocks, 1 semester OR 1 Block all year) Grade Level: 12Prerequisite: Teacher Approval. Must have a valid driver’s license and vehicle to travel to site.This course may be completed as an independent study or classroom course during the student’s senior year. Material covered will include: Orientation, Federal Law, Medication Review, Aseptic Techniques, Calculations, and Pharmacy Operations. It is suggested that students complete and document at least 5 to 10 hours of observation and/or interview with a pharmacist or pharmacy technician. Upon completion of this internship, students are eligible to take the Pharmacy Technician Certification examination in order to obtain national certification. This internship requires supervised on the job work experience related to the students' education objectives in the area of Pharmacy Technician. Students participating in the internship do not receive compensation. Students will be required to follow program and agency requirements for attendance and health screenings. These may include but are not limited to: drug screens, TB skin test, and immunization certificates. A Memorandum of Agreement must be completed for all clinical sites. The clinical portion of this course requires a minimum of 50 hours of experience 40 hours in a retail pharmacy and 10 hours in a hospital pharmacy. Course Costs: PassAssured Online Independent Study Course $299.00, Liability Insurance $30.00, Drug Testing $30.00, and Criminal Background Check $25.00

LEADERSHIP DYNAMICS-HEALTH SCIENCE 170199Credit: ½Grae Level: (Paired with Medical Math for 1 credit)Course Description: This course is designed to assist students with developing skills needed to be successful leaders and responsible members of society. The students will develop personal attributes and social skills necessary for a successful transition into the world of work, and/or further education. Emphasis will be placed on team work, problem solving, critical thinking, communication (oral and written), personal development (work ethics), and leadership. It is recommended that the student be a member of the student organization where they will have opportunities to apply the knowledge gained from this course.

MEDICAID NURSE AIDE (MNA100/HEA198) 170631 Credit: 2 (2 Blocks, 1 Semester) Grade Level: 11-12Prerequisite: Principles of Health Science, Medical Terminology/Emergency Procedures, and Body Structures and Functions & Teacher ApprovalAn instructional program that prepares individuals to perform routine nursing related services to patients in hospitals or longterm care facilities under the training and supervision of an approved registered nurse. State Registry is available upon successful completion of state written and performance examination. Prior to offering this course, the instructor and health science program must be approved for meeting state requirements set by the Cabinet for Health and Family ServicesSupplies: Book $75.00, Liability Insurance $30.00, State Testing Fee $50.00, Drug Testing $35.00, Criminal background check $25.00, Uniform Sets (1) $25.00, and Current CPR Card $10.00.

MEDICAL MATH 170169Credit ½ creditGrade Level: 10-12This course is designed to focus, utilize and build on mathematical skills commonly used in all health occupations. Students will use applied techniques, problem solving and critical thinking to perform mathematical operations such as computations, ratio and proportion, weights and measurements and conversions. This course is strongly recommended for all health Science majors. Successful completion of Algebra I is suggested prior to enrolling in this course. This course may meet the requirements for the fourth elective mathematics credit required for graduation with an allied health major.

MEDICAL TERMINOLOGY I (AHS120) Credit: 1/2

(Paired with CPR/Emer. Proc. for 1 credit) Grade Level: 10-12 Medical Terminology is designed to develop a working knowledge of language in all health science major areas. Students acquire word building skills by learning, suffixes, roots and abbreviations. Students will learn correct pronunciation, spelling and application rules. By relating terms to body systems, students identify proper use of in a medical environment.Knowledge of medical terminology enhances the student’s to successfully secure employment or pursue advanced education in health care. Supplies: Notebook, binder, index cards, pens/pencils

MEDICAL TERMINOLOGY II (AHS115) 170132Credit: 1Grade Level: 10-12Prerequisite: Medical Terminology 1 A course designed to develop a working knowledge of language in all health science major areas. Students acquire word building skills by learning prefixes, suffixes, and abbreviations. Students will learn correct pronunciation, spelling and application rules. By relating terms to body systems, students identify proper use of words in an environment. Knowledge of medical terminology enhances the student’s ability to successfully secure employment or pursue advanced education in health care. Supplies: Notebook, binder, index cards, pens/pencils

PRINCIPLES OF HEALTH SCIENCES (HEA102, WPP200) 170111 Credit: 1 Grade Level: 9-12 Principles of Health Science are an orientation and foundation for occupations and functions in any health care profession. The course includes broad health care core standards that specify the knowledge and skills needed by the vast majority of health care workers. The course focuses on exploring health career options, history of health care, ethical and legal responsibilities, leadership development, safety concepts, health care systems and processes and basic health care industry skills. This introductory course may be a prerequisite for additional courses in the Health Science program. Supplies: Notebook, binder, pens/pencils

WELDING TECHNOLOGYClint Vaughn, Instructor

Welder-Entry Level (CIP 48.0508.01)1. Blueprint Reading for Welding- 4805052. Shielded Metal Arc Welding- 4805213. Cutting Processes- 4805014. Gas Metal Arc Welding- 4805225. Gas Metal Arc Welding Groove Lab- 4805337. Internship- 4805448. CO-OP- 480541

BLUEPRINT READING FOR WELDING (WEL170/171)Credit: 1 (1 Block-1 Semester)Grade Level: 9-12Lab Fee $20This course provides a study of occupationally specific prints for welders. Advanced study of multi-view drawings, assembly drawings, datum dimensions, numerical control drawings, sheet metal prints, casings and forgings, instrumentation and control charts and diagrams, working drawings, geometric dimensioning and use of reference materials and books are included.Occupational specifics include welding drawings, symbols, and specification interpretations are stressed. This course provides students with practice fabricating from a blueprint.Students will read and fabricate from detail prints, control distortion during fabrication, and follow the proper sequence in welding a fabricated part. Students will use welding symbols and study weld sizes and strengths.

Shielded Metal Arc Welding (WLD 120)Credit: 1 (1 block, 1 semester)Grade Level: 9-12Lab Fee $20Students learn the identification, inspection, and maintenance of SMAW electrodes; principles of SMAW; the effects of variables on the SMAW process to weld plate and pipe; and metallurgy.

GAS METAL ARC WELDING (WEL140/141)Credit: 2 (2 blocks, 1 semester)Grade Level: 10-12 Lab Fee $20This course is designed to teach students the identification, inspection, and maintenance of GMAW machines; identification, selection and storage of GMAW electrodes; principles of GMAW; and the effects of variables on the GMAW process. This lab course teaches the practical application and manipulative skills of Gas Metal Arc Welding and the proper safety precautions needed in this process. Both ferrous and non-ferrous metals will be covered, as well as various joint designs on plate in all positions.

GAS METAL ARC WELDING GROOVE LAB Credit: 1Grade Level: 11-12Lab Fee $20Prerequisite: Gas Metal Arc WeldingTeaches the method of operation and application of the Gas Metal Arc Welding process for weldinggroove welds in both ferrous and non-ferrous plate in all positions using both short circuiting and spraytransfer where appropriate.

CUTTING PROCESSES (WEL110/111)Credit: 1 (1 block, 1 semester)Grade Level: 9-12 Lab Fee $20Prerequisite: Blueprint Reading for WeldingThis course is designed to provide the student with a working knowledge of various cutting processes used by the welding industry. This course will include, but is not limited to safety, theory of operation, setup and operating techniques, troubleshooting and making minor equipment repairs, terms and definitions, identification, evaluation, repair and prevention of discontinuities of cut surfaces when cutting with OFC, PAC, SMAC, and Mechanical Cutting Processes.

WELDING INTERNSHIP I (WEL198) Credit: 1 (1 Block, 1 Semester) Grade Level: 11-12Prerequisite: Instructor ApprovalWork individually with instructor to create and fabricate projects.

WELDING INTERNSHIP II (WEL298) Credit: 2 (2 Blocks, 1 Semester OR 1 Block all year) Grade Level: 12Prerequisite: Instructor ApprovalWork individually with instructor to create and fabricate projects.

CO-OP I (WEL199) Credit: 1 (1 Block, 1 Semester) Grade Level: 11-12 Prerequisite: 2 Credits of Welding and Instructor ApprovalProvides on the job training to meet student’s educational objectives.

CO-OP II ( WEL299 ) Credits: 2 (2 Blocks, 1 Semester OR 1 Block All Year) Grade Level: 11-12Prerequisite: 2 Credits of Welding and Instructor ApprovalProvides on the job training to meet student’s educational objectives.