auto industry project
TRANSCRIPT
-
7/29/2019 Auto Industry Project
1/52
CONTENTS
1. Preface
2. Acknowledgement
3. Certificate
4. Project Description
Auto-component Industry in India
Big players go high-tech
Government Initiatives
FDI Scenario
Domestic Sales--How is Indian market performing
Exports
Indian Component Industry is fast emerging as an
Attractive OEM/Tier 1 Supplier
Company Profile
Auto Components-Major players
Data Analysis and Interpretation
5. Conclusion
6. Bibliography
-
7/29/2019 Auto Industry Project
2/52
INTRODUCTION OF THE PROJECT
The automobile industry in the country is one of the key sectors of the economy in
terms of the employment opportunities that it offers. The industry directly employsclose to around 0.2 million people and indirectly employs around 10 million people.The prospects of the industry also has a bearing on the auto-component industrywhich is also a major sector in the Indian economy directly employing 0.25 million
people.
All is not well with the automobile industry the world over currently with theslowdown that has gripped most of the major economies of the world. The gap
between the manufacturing capacity volume and the assembly volume is growing bythe day and has worried the manufacturers. This state of affairs has triggered a lot ofcutthroat competition and consolidation in the industry. Cost reduction initiatives have
come to be the in thing in the global industry today. Towards this direction, manyautomobile factories are being closed down.
The Indian automobile industry is a stark contrast to the global industry due to manyof the characteristics, which are peculiar to India. The Indian automobile industry isvery small in comparison to the global industry. Except for two wheelers and tractorssegments, the Indian industry cannot boast of big volumes vis--vis global numbers
-
7/29/2019 Auto Industry Project
3/52
SCOPE OF PROJECTThe scope of project is to identify the premiere players in auto-component industryand to make a comparative analysis of their financial positions as well as future
prospects.
-
7/29/2019 Auto Industry Project
4/52
OBJECTIVES OF PROJECT1. To do comparative analysis of the premiere players of auto-component market
-
7/29/2019 Auto Industry Project
5/52
RESEARCH METHODOLOGYRESEARCH METHODOLOGY
The research involves plotting of graphs on the basis of calculation made in the excelworksheets. On the basis of these calculations and charts further conclusions weredrawn.
The financial data of all the companies taken up for the project have been taken fromwww.yahoofinance.com
-
7/29/2019 Auto Industry Project
6/52
Auto-component Industry in India
The auto component industry has come of age and now forms an importantcomponent of the Indian economy. In recent years, it has grown more impressively,fetch double digit growth. More interestingly, it has captured attention as well as
business from leading auto makers of the world. The industry plays a crucial role inthe automobile sector. Manufacturing vehicles typically involve assembling a largenumber of components out-sourced from number of ancillaries or componentmanufacturers. Competitiveness with quality as a theme has been the watchword forthe Indian industry and especially the auto component industry ever since the Indianeconomy was opened up to the world in the early 1990s. While economic revival,lower interest rates and better road infrastructure are driving domestic demand forautomobiles and, therefore, components, increasing outsourcing by global automobilemajors is creating a huge export opportunity for Indian component manufacturers.
Industry dynamics
The Indian auto components industry started out small in the 1940s supplyingcomponents to Hindustan Motors and Premier Automobiles, two largestmanufacturers of automobiles in India at that time. In the 1950s, the arrival of Telco,Bajaj, Mahindra & Mahindra led to steadily increasing production. A closed marketwith high import tariffs characterized the Indian auto component industry pre 1985.1985-91 saw significant JVs in the Indian auto component segment with Japanesemanufacturers. After 1991, the delicensing of the sector led to global automanufacturers initiating assembly operations in India. This subsequently led to globalTier I players entering the Indian auto space and the recognition of the potential in theIndian auto component segment.The Automotive Component ManufacturesAssociation (ACMA) classifies the auto ancillary
industry into the following product segments: Engine and engine parts: Pistons, piston rings, piston pins, gaskets, carburetors, fuelinjection pumps, etc. Drive transmission and steering parts: Transmission gears, steering gears, crownwheels and pinions, axles, wheels, etc. Suspension and braking parts: Leaf springs, shock absorbers, brake assemblies, etc. Electricals: Spark plugs, starter motors, generators, distributors, voltage regulators,flywheel magnetos, ignition coils, etc. Equipment: Dashboard instruments, headlights, horns, wipers, etc. Others: Fan belts, sheet metal parts, plastic mouldings, etc.
The major players in the auto ancillary industry can be classified between the onescatering to the two wheeler industry and the four wheeler industry. MICO, BharatForge, Sundaram Clayton, Sundaram Brakes, Rane Brakes, etc. mainly cater tocommercial vehicles/tractors. There are many companies like Ucal Fuel, MothersonSumi, PRICOL, Subros, etc. which supply mainly to car industry. Companies likeMunjal Showa, Lakshmi Auto, Omax Auto, etc. cater to two-wheelers.
-
7/29/2019 Auto Industry Project
7/52
Sectoral PerformanceThe auto-ancillary was the best performing sector among the intermediate goods.Different segments of the sector such as bearing, casting, fasteners, batteries and tyreshave grown in a range of 25-40%.During the June quarter, global automobile majors have announced major investment& domestic automobile companies such as General Motors (GM) and Honda infragmented auto-ancillary sector. Global majors are in a very critical condition; theyare loosing their market share because major automobile companies are beingattracted by India, China, & Taiwan. During first quarter of FY07, exports ofautomobile components grew around 25% compared to the previous quarter on a YoY
basis. And exports registered a growth at around Rs 2833 crore compared to aroundRs 3530 crore in the corresponding quarter of FY06. The main reason for boost inexport is that the nature of the customer base of overseas market has been undergoingmajor change. Indian companies are transforming into principal suppliers for theOriginal Equipment Manufacturers (OEMs) from the after sales market orreplacement market. During that quarter, production of autocomponents increased by15% YoY. And the result came out so far in this quarter is, Shanthi Gears, witnessed a
jump in net profits for the quarter ending in September, 2006. During the quarter, thecompany witnessed a jump in NP at 43.45%, Sales for the quarter rose 31.90%compared with the corresponding quarter, a year ago. The company has facilities formanufacturing patterns, centrifugal castings of phosphor bronze rings, ferrouscastings, aluminum castings, heat treatment, forging, fabrications and cuttermanufacturing in-house which constitute the major raw materials for gearboxes.Automotive Axles reported marginal improvement in the net profits for the quarterended June 30, 2006. During the quarter, the company reported a 2.30% rise in profitsand Sales for the quarter rose 35.15% compared with the corresponding quarter, Y-o-Y.
Future Outlook
Given the significant scale up of capacities by the domestic majors, and theirimproving global cost effectiveness, the domestic auto ancillaries are well set tosustainable scale up their share of the global auto component pie. The players areaggressively focusing on new client acquisition, inorganic growth in developedcountries and cost reduction measures on fronts like quality, delivery, design andmanagement.Growth in the domestic market would be driven by sustained growth in supplies toOEMs as well as acceleration in the demand from replacement market. Moreover,
cars, utility vehicles and CVs made in India are increasingly getting acceptance inforeign markets, thus driving the demand further. Even Indian two-wheeler majors aretargeting markets abroad. Simultaneously, foreign auto majors like Ford and Hyundaiare making India its manufacturing base for several models. Overall, the short tomedium term outlook for the domestic auto component producers is positive.Automobile industry, which is a key driver of auto-component industry, is likely togrow at 12-17%. Along with this some other key drivers including exports,outsourcing, and replacement market are slowing down competitiveness in globalmarkets in turn boosting the productivity of Indian autocomponents industry. Setting up a new plant by existing companies and out-sourcing
by the foreign vendors will result in domestic companies benefiting, either byexporting from domestic facilities or setting up facilities in those locations. To meetthe emerging opportunities and challenges, Indian vendors are diversifying across
products, processes, clients and markets. Companies that have restricted themselves to
-
7/29/2019 Auto Industry Project
8/52
domestic business have seen modest growth and flat margins. A robust businessoutlook is expected to drive strong revenue growth for the auto-component industry.Steel is a major raw material in manufacturing of parts. Since mid January 2006, thedomestic steel prices have been increasing. Similarly, other inputs like non-ferrousmetal, fuel, and transport costs have also been increasing. However, the autoancillaries are not able to pass on the rise in costs, due to quality and priceconsciousness of auto majors. Fortunately, healthy rise in volumes, players move upthe value chain, increasing exports together facilitated them to cushion the rise incosts, and enabled them to maintain margins.
Hindustan Composites is planning break lining and clutch facing unit near theproposed Tata Motor plant at Singur in Hooghly district of West Bengal. Thecompany has already started discussion with few tier 1 component manufacturer ofTata Motors in this regard The company is planning to tie up with an outfit which islikely to be entrusted with for the break assembly of small car. Tata Motors isoverhauling its outsourcing policy across all categories of cars. As part of this policy,which is aimed at keeping costs under control, the company has taken a conscious
decision to move away from the multiple vendor models to a single vendor model.
Bharat Forge Ltd. (BFL), signed a Memorandum of Understanding (MoU) with theGovernment of Maharashtra to jointly develop a multi-product Special EconomicZone (SEZ) in Khed Taluka of Pune District. The SEZ is expected to attractinvestments of about Rs. 25,000 crores and generate 120,000 new employmentopportunities. The project has received in-principle approval from the Board ofApproval, Ministry of Commerce, Government of India. The project would beimplemented through a Special Purpose Vehicle (SPV) to be jointly promoted by BFL/ Kalyani Group and the Maharashtra Industrial Development Corporation (MIDC) inwhich the two promoters would hold upto 74% and 26% of the equity capital
respectively. Land acquisition and other project related activities would commenceshortly.
-
7/29/2019 Auto Industry Project
9/52
Indian auto component industry likely to be $ 40bn in 2015
26
134
38
34
164
45
45
212
58
61
246
72
83
276
101
0
50100
150
200
250
300
350
400
450
500
(Rs. bn)
FY02 FY03 FY04 FY05 FY06
Replacement
OEM
Exports
116
309
116
162
346
134
296
419
168
500
507
207
915
650
275
0
500
1000
1500
2000
(Rs. bn
FY07 FY08 FY09 FY10 FY11
Replacemen
OEM
Exports
-
7/29/2019 Auto Industry Project
10/52
The world's top car makers turn to India for the nuts and bolts of their vehicles.Riding this success, and capitalizing on the spiraling demand of domestic autocompanies, the Indian automobile components industry has emerged as one of India'sfastest growing manufacturing sectors, and a globally competitive one. A number ofthem source critical components from India, with engine parts making up nearly
a third of all exports:
10%11%
33%13%
13%
20%
Electrical Parts
Equipments
Engine Parts
Suspension & BrakingParts
Body And Chasis
Drive Transmission &
Steering Parts
-
7/29/2019 Auto Industry Project
11/52
The India Advantage:
Steered here by the country's high engineering skills, established production lines, athriving domestic automobile industry and competitive costs, global auto majors arerapidly ramping up the value of components they source from India. The industry is
poised to jump from exports of Rs. 61 billion in 2005-06 to Rs. 296 billion in 2011-12.According to the Automotive Component Manufacturers Association of India, morethan a third (36 per cent) of Indian auto component exports head for Europe, with
North America a close second at 26 per cent.
Major Export Markets
North
America
36%
Europe
26%
Others
38%North America
Europe
Others
In 2006, components worth Rs.83billion were exported by Indian companies, 75 percent of which were bought directly by car companies. The original equipmentmanufacturers(OEMs) include firms like General Motors, Ford Motor Company,Cummins International, Bosch, Volkswagen, BMW, MAN (trucks) and JCB(earthmoving equipment) amongst others.
-
7/29/2019 Auto Industry Project
12/52
Economic Survey 2006-07 says:
The turnover of the auto component sector has grown from $ 3.1 billion to $ 10
billion between 1997-98 and 2005-06. In 2005-06, the sector's exports grew by 28
per cent to reach $ 1.8 billion. The major destinations of export for this sector
are US and Europe, which belong to the category of high Accepted Quality Level
(AQL).
Over 20 OEMs have set up their International Purchase Offices (IPOs) in India to thecomponents. This number is expected to double by the year 2010.India enjoys a cost advantage with regard to castings and forgings. The manufacturingcosts in India are 25 to 30 percent lower than its western counterparts. India'scompetitive advantage does not come from costs alone, but from its full servicesupply capability.
Destination India
India is on every major global automobile players roadmap, and it isnt hard to seewhy:
India is the second largest two-wheeler market in the world Fourth largest commercial vehicle market in the world 11th largest passenger car market in the world Expected to be the seventh largest by 2016
Investments
Global auto majors and domestic giants are pulling out their purses and putting theirmoney where the production lines are.
Auto parts makerRobert Bosch of Germany will invest $ 201.4 million in itsIndian subsidiaries over two years. Bulk of the investment will be in MotorIndustries Co Ltd (Mico) -- the Bosch flagship in India.
Japanese electronic major, Hitachi Ltd. is planning to start auto componentmanufacturing in India when its OEMs-Isuzu Motor and Nissan Motor--
start manufacturing their cars in India. Dubai-based auto ancillary majorParts International Company has plans toinvest approximately $ 3.6 million in India over three years. This includessetting up a manufacturing facility meant to service exports to CIS andSAARC countries.
Fiat India is taking baby steps in becoming a global sourcing hub forcomponents. Fiat has exported components worth $ 8.3 million last year toits operations in South Africa.
General Motors has decided to increase sourcing of components fromIndian suppliers and intends to ship parts worth $ 1000.7 million to its global
production units by 2010.
-
7/29/2019 Auto Industry Project
13/52
Big players go high-tech
The smaller scale of operations of most Indian auto component companies has meantthat the size of global orders currently awarded to them is less than $50m. Inorder to rapidly acquire scale, leading Indian auto component manufacturersare making huge Investments in creating capacity as well as upgrading
technology. Besides the Greenfield investments, companies are also acquiringcapacities closer to global OEMs to gain ready access to a global customer
base.
Capex Plans(Rs. mn) FY05 FY06 FY07 FY08 FY09E
Bharat Forge 5587 8714 2750 2650 3000
Amtek Auto 4192 10120 3500 4000 4000
Rico Auto 945 1324 1300 850 850
Omax Auto 755 520 600 1100 800
Sono Koyo 261 351 660 1300 1300
Sundaram Fasteners 1259 861 1000 900 500
MICO 1001 3637 3200 3000 2500
Appolo Tyres 1911 1558 1800 3300 1000Balkrishna Industries 857 1183 1100 1000 400
Total of above 16768 28268 15910 18100 14350
-
7/29/2019 Auto Industry Project
14/52
GOVERNMENT INITATIVES
The opening up of the sector over the last decade has caught the attention of globalauto majors as the only market rivaling China in terms of potential market size andgrowth opportunity. As the automobile industry has grown and matured, the Indianauto components industry has also grown tremendously, and is rapidly achievingglobal competitiveness both in terms of cost and quality. Infact, industry observersthink that while Indian automobile market will grow at a measured pace, the autocomponents industry is poised for a take-off and is one of the handfuls of industrieswhere India has a distinct competitive advantage.
In the 1990s, economic liberalization allowed foreign automakers such as Hyundai,Ford, Toyota and GM set up base in India. The local component manufacturers didnot have the requisite size, technology or quality to meet the needs of these
international carmakers. On the other hand, the high import tariffs and pricesensitiveness of the Indian car buyer made it unviable for these companies to importcomponents from their global suppliers. Therefore, the carmakers had to persuadetheir overseas components suppliers to set up local manufacturing base in India. Forexample, Delphi followed after General Motors opened its plant in the state of Gujaratin 1995 and Visteon followed Ford in 1998. As these companies developed andstabilized their Indian operations, they realized the cost advantage of manufacturingcomponents in India typically lower by about 30%. They began to explore the
possibility of exporting back these low cost, high quality components to their globalfactories and thus reduce their overall costs.
-
7/29/2019 Auto Industry Project
15/52
FDI SCENARIO
The Government of India allows automatic approval for foreign equity investment upto 100 per cent for the manufacture of auto components. Manufacturing and importsin this sector is free from licensing and approvals. There is no local content regulationin the auto industry. The engineering export promotion council under the aegis ofMinistry of Commerce and Industry, Government of India, over the years has beenengaged in promoting exports of engineering goods including auto parts. Amongother initiatives that have been affected in 2006-07 are:
Reduction in the duty of raw material to 5-7.5 per cent from the earlier 10 percent.
Setting up of the National Automotive Testing and R&D Infrastructure Project(NATRIP) at a total cost of 290.85 million for enabling the industry to usher
in global standards of vehicular safety, emission and performance standards.
Finalization of the Automotive Mission Plan (AMP) 2006-2016 for makingIndia a preferred destination for design and manufacture of automobile andautomotive components.
Robust production
Indias car production capacity is in for a US$ 2 billion boost. Auto majors haveannounced massive investment plans which will push the countrys car production
past the psychological 2 million mark by the end of fiscal 2006-07, up 70 per centfrom 1.4 million units now. Even at 2 million, India, which stood at No.11 amongglobal car producing nations, will move two steps ahead, past UK (1.6 million) andCanada (1.35 million). It will be neck and neck with Brazils 2-million capacity at
No.8. The automobile industry witnessed a growth of 19.35 percent in April-July2006 when compared to April-July 2005, as is evident from this years productiontrends.
Automobile Export Trends
0100000200000300000400000500000600000700000800000
900000
M&HCV's
TotalCv's
utiltiy
vehicles
total
passenger
motorcycles
totaltwo
wheelers
grandtotal
2001-022002-03
2003-04
2004-05
2005-06
Domestic Sales--How is Indian market performing?
-
7/29/2019 Auto Industry Project
16/52
Increased affluence, wider selection and the ready availability of car loans is drivingthe Indian car market through the roof. During the last six years (200-06), the
production of passenger cars in India increased by more than 100 per cent. Indiaachieved the sales of 1.11 million vehicles last year (2005). Domestic sales have beengrowing at a clipping pace:
Passenger car sales rose by 22.84 per cent during April-September 2006,compared to the corresponding period last year. The cumulative growth of overall sales of passenger vehicles during April-September of 2006-07 was 20.73 percent.
Utility Vehicle (UVs) sales grew at 12.85 per cent during the same period. Overall, the two wheeler market grew by 15.49 per cent during the April-
September period of financial year 2006-07, over the same period last year.
Motorcycles grew by 18.53 per cent, scooters at 0.12 percent and mopeds atabout 6.53 percent over April-September 2005.
Three wheeler sales grew at 19.90 per cent. Goods carriers grew by 26.16 percent and passenger carriers grew at 15.78 per cent during the April-September2006 period, over the same period last year.
Overall, the commercial vehicles segment grew at 36.96 per cent. Growth ofMedium and Heavy Commercial Vehicles was 39.92 per cent. LightCommercial Vehicles also performed well with a growth of 32.86 percent.
0
2000000
4000000
6000000
8000000
10000000
Automobile Production and Sales
Production
Domestic Sales
Exports
Production 5410468 6248838 7290456 8527173 9716718
Domestic Sales 5225788 5941535 6810537 7897629 8910224
Exports 184680 307303 479919 629544 806494
2001-02 2002-03 2003-04 2004-05 2005-06
-
7/29/2019 Auto Industry Project
17/52
Exports
India is fast emerging as a manufacturing base for car exports. According to theSociety of Indian Automobile Manufacturers (SIAM), a total of 89,338 vehicles wereexported in September 2006, a 58.07 per cent jump as compared to the same monthlast year. While passenger vehicle exports grew at 13.15 per cent, two-wheelers andcommercial vehicle exports grew at 27.80 per cent.
Vehcile Exports are Rising
(Qty in 000 Nos)
180
265
367
513
72129
166 176
11 17 3041
0
100
200
300
400
500
600
2002-03 2003-04 2004-05 2005-06
2 wheelers
Cars &MUV'sCVs
-
7/29/2019 Auto Industry Project
18/52
significant growth in auto component industry in both domestic and
export market
3.9 4.45.4
6.7
8.710
0
2
46
8
10
12
2000-01 2001-02 2002-03 2003-04 2004-05 2005-06
production
value
($b
0.62 0.57
0.76
1
1.4
1.6
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2000-01 2001-02 2002-03 2003-04 2004-05 2005-06
Producti
on
Val
Foreign players in India
Calendar 2006 has seen the entry of many high-end brands into the country. TheIndian automobile market will see at least 30 new launches, spanning everything fromaffordable hatchbacks to mid-size models to super luxury high-end cars and SUVs.
Mercedes, BMW, Porsche, Audi, Bentley and Rolls Royce are already here.Now, the Italian marquee Lamborghini is also planning to enter the country.The Italian marquee plans to launch the Gallardo.
German luxury car maker Audi AG is preparing to drive into India a range ofsporty, lifestyle cars like S8 and RS4 early next year.
The year 2007 will also mark Audi's entry into merchandising in Indian car
bazaar. General Motors launched Aveo this year. GM plans to bring in a sporty variant
of the Chevy Optra to add to its existing line-up.
-
7/29/2019 Auto Industry Project
19/52
Following India's growing openness, the arrival of new and existing models, easyavailability of finance at relatively low rate of interest and price discounts offered bythe dealers and manufacturers all have stirred the demand for vehicles and a stronggrowth of the Indian automobile industry.
The data obtained from ministry of commerce and industry, shows high growthobtained since 2001- 02 in automobile production continuing in the first three quartersof the 2006-07. Annual growth was 16.0 per cent in April-December, 2006; thegrowth rate in 2005-06 was 15.1 per cent, the automobile industry grew at acompound annual growth rate (CAGR) of 22 per cent between 2000 and 2006.
With investment exceeding Rs. 50,000 crore, the turnover of the automobile industryexceeded Rs. 59,518 crore in 2002-03. Including turnover of the auto-componentsector, the automotive industry's turnover, which was above Rs. 84,000 crore in 2002-03, is estimated to have exceeded Rs.1,00,000 crore ( USD 22. 74 billion) in 2003-04.
Major Manufacturers of Automobiles in India
Maruti Udyog Ltd. General Motors India Ford India Ltd. Eicher Motors Daewoo Motors India Hindustan Motors Hyundai Motor India Ltd. Telco TVS Motors Swaraj Mazda Ltd
-
7/29/2019 Auto Industry Project
20/52
TATA motors
Government has liberalized the norms for foreign investment and import of
technology and that appears to have benefited the automobile sector. Theproduction of total vehicles increased from 4.2 million in 1998- 99 to 7.3 million in
2003-04.The industry has adopted the global standards and this was manifested in theincreasing exports of the sector. After a temporary slump during 1998- 99 and 1999-00, such exports registered robust growth rates of well over 50 per cent in 2002-03and 2003-04 each to exceed two and- a-half times the export figure for 2001-02.
EVEN GROWTH
Opposing the belief that the growth in automobile industry has catered only to the topincome-stratum of society, Growth of exports of 32.8 % in the first three quarters of
2004-05, the fastest growth in volumes has come from commercial vehicles asagainst passenger cars.
Between 1998-99 and 2003-04, output of commercial vehicles has grown 2.8 timescompared to the 2.2 times increase in passenger cars. Furthermore, two-wheeleroutput continues to dominate the volume statistics of the sector. In 2003-04, for every
passenger car turned out by the sector, there were 7 two-wheelers produced. In thetwo wheeler segment, there is a greater preference for motorcycles followed byscooters, with both production and domestic sales of motorcycles increasing at fasterrates than for scooters in the current and previous years. However, mopeds haveregistered low or negative growth. Export growth rates have been high both for
motorcycles and scooters.
http://void%280%29/http://void%280%29/http://void%280%29/http://void%280%29/http://void%280%29/http://void%280%29/http://void%280%29/http://void%280%29/http://void%280%29/ -
7/29/2019 Auto Industry Project
21/52
The road ahead
Exciting times lie ahead for the Indian automotive component industry. Besides theburgeoning demand from global auto majors, there is also the domestic car industry,which is growing at a spanking rate of over 16 per cent, driven by a rising consumer
base and affordable loans
The opening up of the sector over the last decade has caught the attention of globalauto majors as the only market rivaling China in terms of potential market size andgrowth opportunity. As the automobile industry has grown and matured, the Indianauto components industry has also grown tremendously, and is rapidly achievingglobal competitiveness both in terms of cost and quality. Infact, industry observersthink that while Indian automobile market will grow at a measured pace, the autocomponents industry is poised for a take-off and is one of the handfuls of industries
where India has a distinct competitive advantage.
Th e Fu ture Automo tive Grow th P otential
Th e indian pa ssenger ar mak ret is far f rom beingper c apita c ar pe netration in
500 4 8 0 4 8 0 440
180130 122 90
27 13 12 10 10 7
147
0
100
200
300
400
500
600
Ge
rmany
USA
UK
Japan
S.K
orea
Ma
laysia
M
exico
Sing
apore
Brazil
Th
ailand
Sri
Lanka
Indonesia
Philip
pines
China
India
Indian auto industry has established one of the largest export hubs for most of theglobal players. Several global automotive players have moved their R&D to Indiaoutsourcing research and design elements of the automotive products. R&D expensesas a percentage of net sales was 0.78 per cent in auto components in 2004-05. AlsoIndia scores over other countries like China and Thailand and has gained acceptanceof global OEMs on account of its quality, design and engineering capabilities andlarge pool of low cost, technically skilled and English speaking engineers. ManyIndian firms are working on at least $300-million worth of automotive engineering
design services (AEDS) projects and expected to be a-billion industry by 2010.
-
7/29/2019 Auto Industry Project
22/52
Four different types of players are offering these services:
Captive Centers of global OEMs (GM, Ford, Bosch, Delphi, etc.)
IT Services companies (Infosys, Wipro, TCS, Satyam, etc.)
Design Houses (Dilip Chhabria Designs, Geometric Software, InfensionTechnologies, Neilsoft, etc.)
Subsidiary of Indian Auto Companies (Mahindra & Mahindra, Eicher, TVS,etc.)
The nature of projects is limited largely to CAD/CAM and modeling and analysis buteventually Indian companies could design the entire concept with sketches anddetailed depiction of all vehicle features. The changing scenario of the Indian autoindustry in the context of facing challenges and availing of opportunities in the globalmarkets concerted efforts are needed to create a significance place in the increasedintegrated value chain across the geographical reasons.
The auto industry urgently is to be expanded in regard to increase investment and
local resources to match potential. Significant capital is required for capacityexpansion and fuelling acquisitions. Investments should be made in both OEM andauto components businesses so as to create a low cost model capital and operations
profitable at low scale. Technology and Branding are important for the Indian autoIndustry.
There is a significant gap between Indian firms and leading global OEMs. One of thekey imperatives for Indian auto companies would be to increase spending on R&Dand Brand building to remain competitive on a global basis. This is driven by shorter
product life cycles and increasing number of variants combined with the need tostrengthen brands in the highly competitive overseas markets. The Indian auto
industry, worth US$ 34 billion in 2006, has grown at a CAGR of 14 per cent over thelast five years with total sales of vehicles reaching around 9 million vehicles in 2005-06. That number is likely to see a significant boost, given that the first half of 2006-07has already witnessed a staggering growth rate of 17.12 per cent. Domestic car salesfor the April-September 2006 period stood at an impressive 4.86 million vehicles,including cars, two-wheelers and commercial vehicles.
According to industry experts, if this trend continues, sales could touch 10 million byMarch 2007, clocking an annual growth rate of 20 per cent. In addition, theGovernments announcement to cut excise duty on small cars will soon see auto Indiaemerging as the world's largest manufacturing hub for small or compact cars.
-
7/29/2019 Auto Industry Project
23/52
Indian Component Industry is fast emerging as anAttractive OEM/Tier 1 Supplier
Composition of
Exports in 2006
10
26
16
36
10 1.5
0.5
Africa
America
Asia
Europe
Middle East
Oceania
Others
-
7/29/2019 Auto Industry Project
24/52
200
OEM / Ti e r
75%
Afterm ark
25%
Acquisitions & JV Abroad
Indian companies' overseas acquisitions have been driven by their desire to be amongthe largest and least-cost producers, their quest for technology and a search for new
markets. In July 2006, in order to establish a presence in mainland Europe, AmtekAuto, a manufacturer of automotive components such as engines, transmission andsuspension parts, assemblies and systems, bought 70 per cent stake in Zelter GmbH,
1 9 9
O E M / T ie
3 5 %
A fte r m a r
6 5 %
-
7/29/2019 Auto Industry Project
25/52
one of the three largest manufacturers of turbochargers housing in the world, for anenterprise value of euro 28 million.Following the acquisition of South Koreas Daewoo Commercial Vehicle Co. in
March 2004 by Tata Motors for $102 million and Bharat Forges acquisition ofGerman firm Carl Dan Pedinghaus GmbH for euro 29 million, Mahindra & Mahindra,through its subsidiary agreed to acquire 67.9 per cent stake in Jeco Holding AG, oneof the top five forging companies in Germany, for euro 140 million and subsidiary ofScholz AG. Jeco Holding AG, which focuses on the truck, bus and trailer market,makes gearboxes, engine and axle pans, hubs,
Global AcquisitionsAcquired By Target Value (Rs. cr)
Bharat Forge Imatra Kilsta AB, Sweden 261
Bharat Forge federal forge, US 41
Bharat Forge CDP Aluminiumtechnik 35.4
Bharat Forge Carl Dan Peddighous 157.5
Sundaram Fasteners76% JV with Bleisthal Produktions GmbH,Germany 20
Sundaram Fasteners Precision Forging Unit of Fana Spicer, UK 11.9
Sundaram Fasteners Unit of Textron Deutshland Beteilingungs NA
Amtek Group Zelter, Germany 157.5
Amtek Group Sigma Cast, UK NA
Amtek Group GWK, UK 42
Tata Auto Component Wundsch Weidirge, Germany NA
UCAL Fuel Systems Amtec Precision Products Inc, USA 126
Sona Koyo SteeringSystems 21% in Fuji Autotech France 27.7
-
7/29/2019 Auto Industry Project
26/52
Clutch Auto (CAL) was incorporated in May 1971 in New Delhi, promoted by VijayKrishna Mehta, a technocrat entrepreneur. The company manufactures clutches,components and spares for the automotive sector. The Company is working regular onmodernization and expansion programs and to improve the productivity and quality ofits products. Its clientele includes TELCO, Ashok Leyland, Maruti Udyog, DCMToyota, Escorts Tractors, BEML and state transport undertakings. The company isconcentrating on increasing its capacity for the existing range of vehicles. Productsare upgraded with imported equipment like induction hardening, press tempering andsemi-automatic reveling machines. During the year 2002-03 the Company got patentfor EZ N LITE for heavy commercial vehicles in US and this will give an edge overcompetitors and is expected to result in substantial business increase in the years tocome.
Clutch Auto Ltd (CAL) is the largest supplier of clutches to the commercial vehicleand tractor segment in India. It also caters to the passenger vehicle and
replacement demand and its clientele includes Tata Motors, Ashok Leyland, MarutiUdyog, TAFE, Toyota, BEML, Escort Tractors and State Transport Undertakings,
among others.
Clutch is a technology intensive business dominated by 6 players in the world, alloperating either as joint ventures or as technology partners or license arrangements.CAL is the only standalone clutch company in the world, which is testimony to itstechnology capability.CAL has been associated with production of clutch plates and clutch assemblies andother related components
Products offered
Diaphragm organic clutch assembly
Cover organic clutch assembly Cover ceramic clutch assembly
Range is 160-352 mm
CAL is present in OEM as well as Replacement market, in addition to export
market.
CAL has at present following OEMs purchasers MARUTI UDYOG LIMITED
TATA MOTORS
ASHOK LEYLAND
MAHINDRA & MAHINDRA
PUNJAB TRACTORS LIMITED
INTERNATIONAL TRACTORS LIMITED
EICHER TRACTORS
CAL is also present in replacement market and is catering to the
following companys vehicle Maruti800, alto, baleno, esteem, gypsy, omni, wagon-R and Zen (old model)
TATA indica, indigo, spacio, sumo victa, commercial vehciles
-
7/29/2019 Auto Industry Project
27/52
Ashok Leyland, commercial vehicles
M&M tractors, ITL-Sonalika
Eicher-tractors, Hyundai-santro
Volvo buses, Toyota- qualis
Chevrolet- tavera
Military tanks
The company has ventured into the US truck market through the aftermarket routemaking it the only offshore company to be able to do so. It plans to be a niche
player in the low volume, high value added heavy-duty clutch segment for class 7and 8 trucks. This is because, the replacement demand for trucks in US, with a
population of nearly 4.5-5mn units, is nearly as high (250,000 units pa) as thedemand for new trucks. CAL invested in technology, research and filed for patents and trademarks for anumber of products that it developed.Currently it has 11 patents in USA market, either approved or pending; similarly ithas 31 patents in domestic market
Patents Approved Pending Under FilingOverseas
USA 1 5 5Mexico 1Australia 1
1 7 5
Domestic 15 7 9
Trade MarksUSA 4 9 2
India 11 2 4
Today, the company is the only independent component company from India withan independent patents and trademarks portfolio.
It has built many innovative products like the Cool Clutch, Whisper and EZ NLite offering interchangeability unit-to-unit, component-to component with the
same serviceability norms and tools. While the domestic market will ensure steadyrevenues to the company; high growth is expected to come from the exportinitiatives taken by the company. Presently, 25% of its revenues are on account ofexports.
This proportion is expected to rise and contribute to around 50% of revenues inthe next 3-4 years. The Company increased its capacity for clutch discs and clutchcover assemblies by 122% and 200% respectively in FY05 to meet the growingdemand for its products.The company has set up a strong distribution network along with product liabilitycover for overseas market. It already received orders from Fleet Pride, a leadingheavy-duty class parts distributor in the US.
-
7/29/2019 Auto Industry Project
28/52
CAL is the number one company in production of clutch plates and clutchassemblies
Only company to possess an indigenous know-how of clutch plateproduction
Obtained approval of TATA motors for the entire range of current andfuture products
Exports to 40 countries 56.41% YOY growth in sales revenue
81% YOY growth in domestic market
71% YOY growth in bottom line
Three year expansion plans:
Company has following expansion plan
To triple its production capacity to 4 million units by FY10 from current
capacity of 1.4 million units Expansion cost to be Rs. 30 crore which will be funded through internal
accruals
Operating margins @ 16% for April December06
To triple revenues to Rs. 650 crores by the end of FY09-10
Export contribution to rise 50% from current one third at present
-
7/29/2019 Auto Industry Project
29/52
Auto Components-Major players
Auto Components Market
Gearing upStrong growth in the domestic automobile industry and astable 10-15% future growth outlook over the next two yearswould drive demand for auto components both in the domesticOEM and the aftermarket. Exports too are in a scale up modefor leading players like Bharat Forge, Amtek Auto and MICO.We believe, a slowdown in key global markets and the fragilefinancial health of global OEMs as also Tier-I vendors wouldlead to higher outsourcing by these players to low cost autocomponent players in the long term. We expect 15% revenueCAGR and 22% earnings CAGR for our auto component universeover FY07-09 led by strong revenue and earnings growth for
Bharat Forge, MICO and Balkrishna Industries over the sameperiod.
Domestic growth on a firm footing, exports looking up:It is expected that domestic revenue for auto component companies
will remain strong given a stable 10-15% volume growth outlook forvarious auto segments. Exports for leading players, too appear to bescaling up and a slowdown in key global markets and fragile financialhealth of global OEMs and Tier-I vendors will only accelerate the pace ofoutsourcing to leading auto component players in Low Cost Countries likeIndia. Amtek Auto has successfully implemented the strategy of acquiring
customer base overseas and outsources the labor intensive operations toits low cost Indian facilities.
Building capacity to acquire scale:Lack of scale has prevented Indian auto component players from
winning outsourcing deals exceeding US $50m. Companies are thereforeinvesting aggressively in capacity build-up and technology upgradation.Major companies are expected to invest Rs32bn over FY08-09 increasingnew capacity.Expect strong earnings momentum for leading players:
The expected revenue CAGR is 15% and earnings CAGR is 22% forauto component market over FY07-09 led by strong growth for Bharat
Forge, MICO and Balkrishna Industries
The major players in Auto-component market are
Amtek Auto Apollo Tyres Balkrishna Industries Bharat Forge MICO Omax Autos Rico Auto Industries Sona Koyo Sundram Fasteners
-
7/29/2019 Auto Industry Project
30/52
Clutch AutoStrong growth outlook for domestic auto OEMs to boost demand
While auto component companies retain focus on enhancing their overseasrevenues, their domestic businesses too appear on a firm footing with buoyant growthoutlook for the domestic auto OEMs. Favorable demographics (rising income levels
and an increasingly younger population), along with very low vehicle penetrationindicate strong long-term demand prospects for cars and two-wheelers. Strong growthin industrial production, emergence of new growth drivers like organized retail, andthe ongoing pace of investments and infrastructure development in the country woulddrive demand for commercial vehicles. While factors like higher interest rates and ahigher base could check growth rates in the near term, the industrys prospectsnevertheless remain strong.
FY05 FY06 FY07 FY08 FY09 CAGR
FY07-09E(%)
Car Sales 981 1052 1269 1427 1618 13
UV Sales 247 269 309 341 394 13
PV Sales 1228 1321 1578 1768 2012 13
MHCVs 212 221 294 329 363 11
LCVs 136 170 223 255 291 14
CVs 348 391 517 584 654 12
Motorcycl
es
5222 6213 7089 7818 8587 10
Scooters 984 992 976 1078 1202 11
Mopeds 350 376 1078 432 484 11
Twowheelers 6556 7581 9143 9328 10273 10
Domestic Autombile industry is on a firm footing
figures in $ bn
-
7/29/2019 Auto Industry Project
31/52
Amtek Auto
Amtek Auto (Amtek) has the twin advantage of presence in both forgings and
castings, two key segments in the global outsourcing space. Given Indian
companies edge over other low cost regions owing to their superior engineering& designing skills and given Amteks aggressive capacity expansion plans, expect
sustained growth momentum in its revenues and earnings in the coming period.
At Current Market Price (CMP), the stock trades at 11.4x FY09E consolidatedearnings and 5.7x EV/EBIDTA.
Presence in two key areas of forgings and castings: Amteks product portfolioincludes a mix of both forgings and castings products (82:18). Indian companies havean edge over other low cost manufacturers in the forgings and castings space owing totheir superior engineering and design skills. Further, these processes are highly labourintensive and are being increasingly outsourced by global majors to low cost
countries.
Exploiting synergies from overseas acquisitions: Amtek has successfullyimplemented the model of acquiring front-end capacities in proximity to global OEMsin key markets like USA and Europe, and then outsourcing the labour intensiveoperations to India to reduce the overall cost of production. The company expects toincrease the share of exports to overseas group companies to 65% in FY07 against60% in FY06.
Expect strong 18% earnings growth over FY06-09: Amtek continues to pursue itsgrowth strategy of a mix of organic and inorganic growth. The expected consolidatedrevenue CAGR is 24% for Amtek over FY06-09, leading to an 18% consolidatedearnings CAGR over the same period.
-
7/29/2019 Auto Industry Project
32/52
Shareholding Pattern
Promoters
32%
Foreign
46%
Non promoter
corporate
holding
2%
Public & others
3%
Institutions
17%
Key financials (consolidated)*Year to June 30 FY05 FY06 FY07E FY08E FY09E
Net sales (Rs m) 16605 26451 40242 45499 51011
Adj. net profit (Rs m) 1475 2564 3940 4310 4762
Shares in issue (m) 101 122 138 138 138
Adj. EPS (Rs) 14.6 21 28.6 31.3 34.6
% growth 60.8 44.1 36.1 9.4 10.5
PER (x) 26.9 18.7 13.7 12.5 11.4
Price/Book (x) 4.5 2.7 2.5 2 1.7
EV/EBITDA (x) 14.7 11 7.7 6.7 5.7
RoE (%) 23.6 19.3 19.9 17.8 16.4
RoCE (%) 17.5 13.7 15.7 15.3 15.1
Apollo TyresApollo Tyres (Apollo), with its leadership position in the truck and bus (T&B)
replacement tyre market, is likely to be a key beneficiary of the expected surge in
this segment. The Dunlop SA acquisition offers significant synergies to be reapedin terms of access to T&B radial tyre technology, a wider product portfolio and
easy entry in new geographies. Apollo is betting big on radialisation picking up
pace in the T&B segment and plans to set up a Greenfield plant targeted at T&B
radials. Though the companys profitability has improved significantly over the
last two quarters on the back of softening rubber prices, it nevertheless remains
vulnerable to rubber price fluctuations.
Well poised to benefit from higher replacement demand:
Replacement demand for tyres in the CV space is likely to witness a surgeowing to a strong 24% 5-year CAGR in domestic MHCV sales. Further, replacementdemand for tyres is also likely to jump as growth in new truck sales moderates overthe next two years. Apollo, the leader in this space with a share of 35%, is likely to bea key beneficiary of the expected surge in demand in this segment.
-
7/29/2019 Auto Industry Project
33/52
Dunlop SA acquisition offers significant synergies to be reaped:
The Dunlop SA acquisition provides Apollo with ready access to radial tyretechnology, especially T&B radial technology. This assumes significance in the wakeof Apollos proposed T&B radial tyre greenfield facility. The acquisition also
provides it with benefits of an extended product line and access to key Europeanmarkets where the company has negligible presence.
Shareholding Pattern
Promoters
32%
Public & others9%
Foreign
26%
Institutions
27%
Non Promoter
Corporate
Holding
4%
Govt Holding
2%
K ey finan cials (conso lidated)*Ye ar to M a rc h 31 FY0 5 FY06 FY0 7E FY0 8E FY0 9E
Net sales (Rs m) 22,25526 ,255 32 ,923 37,483 41,55
A dj. net pro fit (Rs m ) 676 724 1,134 1,440 1,551S hares in is sue (m ) 38 38 46 50 50
A dj. E P S (Rs ) 17.6 18.9 24.4 28.6 30.8
% growth -3.9 7 29.4 16.9 7.8
P E R (x ) 20.4 19.1 14.7 12.6 11.7
P ric e/B ook (x ) 2.4 2.2 1.7 1.5 1.4
E V /E B ITDA (x ) 11 8.5 6.4 6.4 5.5
RoE (% ) 11.8 12 14.1 13.2 12.2
RoCE (% ) 9.4 11.1 14.6 14.8 14
Balkrishna IndustriesBalkrishna Industries (BIL) is the largest exporter of tyres from
India and among the top 10 manufacturers of off-highway tyresglobally. BILs strong product development ability andcompetitive product pricing (arising from low cost advantage)
-
7/29/2019 Auto Industry Project
34/52
has yielded strong revenue growth (28.8% CAGR for FY02- 06),superior margins (19.2% for 9MFY07) and high return ratios(RoE of 33.2% for FY06). We expect BIL to deliver revenue andearnings CAGR of 23% and 31% respectively over FY07-09.Given strong fundamentals and compelling valuations (4.0xEV/EBIDTA and PER of 7.0x FY09 estimates),
-
7/29/2019 Auto Industry Project
35/52
BIL the global OTR player: BIL is among the top 10 manufacturers ofOTR tyres globally. The low volume and diverse product varieties as alsolow capacity utilization levels typical of the segment have triggered exit oflarge players, much to the advantage of BIL. The companys competitivestrength lies in offering a wide range of tyres at competitive prices loweron the back of its strong product development ability and lower labour
costs in India.
Superior margins and return ratios: BILs margins are expected toexpand primarily owing to a recent softening in rubber prices and aplanned scale up in the high margin tractor radial tyre segment. BIL hasalso hiked the prices of its products by 2-3% wef April 2007. Also, BILplans to spin off the paperboard and textile processing divisions into fullyowned subsidiaries so as to focus on each business and improve returnratios in the core tyre business.
Reiterate Outperformer: BIL has a strong product line up that gives it ajumpstart vis--vis new entrants in the OTR tyre segment. Further, a
favorable demand-supply scenario in key global markets
-
7/29/2019 Auto Industry Project
36/52
Shareholding Pattern
Promoters
54%
Public & others
9%
Foreign
24%
Institutions
12%
Non Promoter
Corporate
Holding
1%
Key financials
(consolidated)*
Year to March 31 FY05 FY06 FY07E FY08E FY09E
Net sales (Rs m) 4,880 6,358 8,427 10,663 12,830
Adj. net profit (Rs m) 575 740 814 1,128 1,445
Shares in issue (m) 18.6 19.3 19.3 20.1 20.1
Adj. EPS (Rs) 31 38.3 42.1 56.2 72
% growth 98.1 23.7 10 33.6 28.1PER (x) 16.3 13.2 12 9 7
Price/Book (x) 5.9 3.4 2.8 1.9 1.6
EV/EBITDA (x) 9.8 8.3 7.1 5.2 4
RoE (%) 43.1 33.2 25.8 26.1 25.2
RoCE (%) 29 23.7 19.7 23.2 25.3
Bharat ForgeBharat Forge (BFL) has emerged the leader in the Indian auto component space
with an extensive global footprint. Besides the revenue scale up expected from
enhanced capacities, BFL is likely to benefit from enhanced focus on new and
more specialized segments. In addition to a diversified revenue mix, these efforts
would also lead to margin expansion for BFL. We expect 15% revenue CAGR
and 29% earnings CAGR for the consolidated entity over FY07-09.
-
7/29/2019 Auto Industry Project
37/52
Capacity utilization to improve significantly:
BFL currently is in the ramp up phase of its enhanced capacity and a sharpjump in utilization levels over the next two quarters is expected. Besides increasedtonnage, product mix too would improve with a higher proportion of machinedcomponents.
Focus on diversifying revenue sources:
BFL has significantly enhanced its focus on heavy-duty forged componentsused in non-automotive industries like railways, construction equipment, oil & gasand others. These are high value added, high margin components with tremendousgrowth potential owing to increasing investments in these sectors. BFL expects theshare of non-automotive business to increase to ~25% in 3-4 years from 17%currently.
Expect strong growth momentum:
We expect a CAGR of 15% in BFLs consolidated revenues over FY07-09
aided by a 21% CAGR in standalone revenues. Higher revenue contribution from thestandalone entity (vis--vis FY07 levels) is likely to lead to margin expansion for BFLgoing forward.
Shareholding Pattern
Promoters
39%
Public & others
19%
Foreign19%
Institutions
13%
Non Promoter
Corporate
Holding
10%
Key financials (consolidated)*
Year to March 31 FY05 FY06 FY07E FY08E FY09E
Net sales (Rs m) 19,934 30,189 41,783 48,418 54,783
Adj. net profit (Rs m) 2,011 2,505 3,027 4,119 5,041
Shares in issue (m) 198 222 235 235 235
Adj. EPS (Rs) 10.2 11.3 12.9 17.5 21.4
%growth 48.5 10.8 14.2 36.1 22.4PER(x) 33.7 30.4 26.6 19.6 16
Price/Book (x) 11.9 5.6 4 3.4 2.9
EV/EBITDA (x) 17.3 15.7 12.6 9.7 7.9
RoE (%) 46.5 26.1 17.9 18.9 19.9
RoCE (%) 38.9 21.4 17.1 20.4 22.2
-
7/29/2019 Auto Industry Project
38/52
MICOMICO is ideally positioned to benefit from the renewed focus ofleading Indian OEMs on diesel cars based on the Common Rail(CR) platform. MICO is also gaining prominence as Boschsglobal R&D centre and outsourcing hub for many components.
Expected 18% revenue CAGR and 29% earnings CAGR for MICOover CY06-08 led by a surge in both domestic and exportrevenues. Also, Boschs has made an open offer for anadditional 20% stake in MICO (at Rs 4,000 per share) tofacilitate further transfer of critical technology and processes
Leveraging on Boschs leadership in CRDI systems:CRDI-based diesel systems for passenger vehicles are gaining
popularity in India. We believe MICO, with Robert Boschs global leadershipin CRDI systems, is well placed to capitalize on this opportunity. MICOcurrently supplies CRDI systems to leading OEMs like (Maruti Udyog andM&M) and is likely to cater to Tata Motors CRDI platforms based on Fiatsdiesel technology (globally, Fiat uses Boschs CRDI systems).
Gaining prominence in Boschs global plans:MICO is emerging as a global R&D and competence centre for Bosch
Group worldwide as also a manufacturing hub for many components.Already, a number of production lines for components like injectors,nozzles, single cylinder pumps, regulators, etc have been transferred fromBoschs overseas locations to MICO. Thus, besides the growth potential inthe domestic market, MICO stands to benefit from Boschs global plans.Strong growth prospects:
MICOs growth prospects appear promising in the domestic market
in view of increasing focus of Indian OEMs on CR systems-based dieselcars.
-
7/29/2019 Auto Industry Project
39/52
Shareholding Pattern
Foreign
8%
Institutions
20%
Promoters
61%
Public & others
9%
Non Promoter
Corporate
Holding
2%
Key financials (consolidated)*
Year to DEC 31 FY05 FY06 FY07E FY08E FY09E Net sales (Rs m) 24,169 30,892 39,098 46,323 54,391
Adj. net profit (Rs m) 3,670 3,350 3,921 5,257 6,531
Shares in issue (m) 32.1 32.1 32.1 32.1 32.1
Adj. EPS (Rs) 114.3 104.5 122.1 163.8 203.4
% growth 44.1 -8.6 16.9 34.1 24.2
PER (x) 33.7 36.9 31.6 23.6 19
Price/Book (x) 9.9 8 6.1 5 4EV/EBITDA (x) 19 17.5 13.6 10.6 8.5
RoE (%) 33.8 23.9 21.8 23.1 23.4
RoCE (%) 42.2 29.3 28.7 29.4 30.1
Omax AutoOmax Auto (Omax) is working on reducing its exposure to HeroHonda, which accounts for ~62% of its revenues. Commencing
December 2007, Omax plans to undertake chassismanufacturing for Tata Motors MHCVs. The project, at fullpotential, would generate annual revenues of Rs2.4bn besideshigher margins vis--vis Omaxs current margins. Omax haslowered its operating cost base in the last few quarters andgoing forward, it expects to derive cost benefits on steelpurchases from Omax Steel. Omax also stands to benefit fromhigher capacity utilization of its two new plants.
-
7/29/2019 Auto Industry Project
40/52
Diversifying the revenue base:Omax is setting up a new chassis manufacturing unit for Tata
Motors at the latters Lucknow plant. The first phase of the project, likelyto go on stream by December 2007, offers an annual revenue potential ofRs1.2bn (Rs2.4bn on completion by FY10). Omaxs supplies to non-HeroHonda clients like TVS, Sundaram Clayton and Mitsubishi are expected toscale up, which along with higher exports from the Binola plant, would
diversify the revenue base.
Cost reduction measures paying off:Omax has reduced its operating costs by pruning the excess
temporary labour and switching over to more economical power sources.these measures are expected to have yielded net savings of 70bp in FY07.Further, Omax expects to save 5% on its steel procurement from thenewly set up steel plant Omax Steel (one-third of the production to besourced by Omax).
Expect strong growth momentum:Omaxs diversification strategy is likely to bring stability in revenues as
well as margins owing to reduced dependence on a single client HeroHonda (~62% of revenues in FY07).
Shareholding Pattern
Public & others
24%
Foreign
8%
Institutions
4%
Promoters
52%
Non Promoter
Corporate
Holding
12%
Key financials
(consolidated)*
Year to March 31 FY05 FY06 FY07E FY08E FY09E
Net sales (Rs m) 5,298 5,786 6,954 8,501 9,844
Adj. net profit (Rs m) 203 201 238 302 345
Shares in issue (m) 21 21 21 21 21
Adj. EPS (Rs) 9.5 9.4 11.1 14.1 16.1
% growth -1.2 -1.1 18.6 26.7 14.3
PER (x) 8.8 8.9 7.5 5.9 5.2
Price/Book (x) 1.8 1.6 1.4 1.2 1
EV/EBITDA (x) 5.1 5.5 4.3 4.1 3.8
RoE (%) 23.6 19 19.6 21.3 20.8
RoCE (%) 16.1 13.3 15.7 16.7 16.7
RICO Auto
-
7/29/2019 Auto Industry Project
41/52
Rico Auto (Rico), deriving ~60% of revenues from Hero Honda,would likely be impacted by a slowdown in the domestic two-wheeler industry due to a high inventory build up. FCC Rico(Ricos 50:50 JV) would, however, benefit from higher off takefrom HMSI (~40% of FCC Ricos revenues) as volumes surge (up30% yoy in April 2007) post the launch ofShine and the newHonda Unicorn. While we expect Rico to face margin pressure
from Hero Honda, higher contribution from FCC Rico (high-margin business) could offer some respite.
Likely slowdown in off-take from two-wheeler players:Ricos domestic business would be impacted due to sluggish outlook
for the two-wheeler industry, particularly for Hero Honda (60% of Ricosrevenues). However, FCC Rico (Ricos 50:50 JV) is likely to witness arevival in offtake from HMSI (~40% of FCC Ricos revenues) after thelaunch ofShine and the new Honda Unicorn.
Passenger car components foray a new revenue stream:
Rico, by way of a licensing and technological assistance agreementwith Teksid Aluminium of Italy, plans to foray into Aluminium EngineBlocks and Engine Heads business for passenger cars. Rico would supplyengine blocks and cylinder heads for Tata Motors upcoming small carproject. This project opens up a new growth vista for Rico besides loweringits dependence on the two-wheeler component business.
Expect 15% earnings CAGR over FY07-09:Expected 13% CAGR in Ricos consolidated revenues and 15% CAGR inconsolidated earnings over FY07-09. We expect some margin cushion forthe company due to increased contribution from FCC Rico. Stock trades atPER of 10.9x and EV/EBIDTA of 4.8x FY09 estimates.
-
7/29/2019 Auto Industry Project
42/52
Shareholding Pattern
Promoters
46%
Public & others
14%
Foreign
18%
Institutions
20%
Non Promoter
Corporate
Holding
2%
Key financials(consolidated)*
As on March 31
2007 FY05 FY06 FY07E FY08E FY09E
Net sales (Rs m) 6,798 7,871 8,988 10,209 11,425
Adj. net profit (Rs m) 498 439 393 458 518
Shares in issue (m) 107 123 126 126 126
Adj. EPS (Rs) 4.6 3.6 3.1 3.6 4.1% growth 33.5 -22.9 -12.5 16.3 13.2
PER (x) 9.7 12.5 14.3 12.3 10.9
Price/Book (x) 4.3 2.2 2 1.8 1.6
EV/EBITDA (x) 6.3 6.1 5.9 5.4 4.8
RoE (%) 50.9 24.4 14.7 15.2 15.7
RoCE (%) 31.4 21.8 16.9 16.9 17.1
Sona KoyoSona Koyo has witnessed significant value growth with thelaunch of C-EPS systems and higher share of power steeringsystems in sales mix. Sona Koyo is also developing steeringcolumns for CVs to scale up its presence in the segment. Thecompany is striving to cut its dependence on Koyo in theexport markets. It also plans to increase localization level ofpower steering systems to achieve margin expansion. Expectstrong 29% revenue CAGR and 22% earnings CAGR for Sona
Koyo over FY07-09.
Improved product offerings leading to value growth:
-
7/29/2019 Auto Industry Project
43/52
Inclusion of C-EPS systems in the product range has strengthenedSona Koyos portfolio besides leading to significant value growth. Withthis, the share of power steerings in total revenues has jumpedsignificantly (55% in FY07 from 28% in FY06). Sona Koyo is also workingon developing highly specialized steering columns for HCVs.
Expect margin recovery on import substitution:The shift in Sona
Koyos product mix towards power steerings has adversely impacted itsmargins due to high import content. However, Sona Koyo plans to localize70% of C-EPS components, which should lead to margin expansion.
Excellent business prospects, attractive valuations:Led by higher value growth from supply of C-EPS systems, expect
21% revenue CAGR and 23% earnings CAGR for Sona Koyo over FY07-09(after factoring in equity dilution).
Shareholding Pattern
Promoters
49%
Public & others
33%
Foreign
4%
Institutions
4%
Non Promoter
Corporate
Holding10%
-
7/29/2019 Auto Industry Project
44/52
Key f inan cials
(consolidated)*
As on M arch 31
2007 FY 05 FY 06 FY 07E FY 08E F Y09E
Net sales (Rs m ) 2,975 3,397 5,808 7,109 8,54Adj. net prof it (Rs m ) 167 165 276 383 45
Shares in issue (m ) 88 88 93 97 10
Adj. EPS (R s) 1.9 1.9 3 3.9 4.5
% growth 37.6 -0.8 58.4 32 13.
PER (x ) 27.6 27.8 17.6 13.3 11.
Price/Book (x ) 6.9 6 4 2.9 2.3
EV /EBITDA (x ) 16 14.6 10.3 8 7
RoE (% ) 27.4 22.8 28.5 26.1 22.
RoCE (% ) 17.8 14.6 17.9 17.9 17.
-
7/29/2019 Auto Industry Project
45/52
Sundram FastenersSundram Fasteners (SFL) diversification strategy is paying off.Exports scale up and entry into new product segments (pumpassemblies and engine components) has generated
incremental revenues for the company. SFL posted impressive27% consolidated revenue CAGR over FY04-06 despite pricingpressure in key markets.
Realizations capped while input costs rise:SFL faces pricing pressure in the domestic as well as export
markets. While realizations in key product categories like high tensilefasteners and coated metal parts have remained flat, cost of inputs hasescalated at a CAGR of 13% over the last five years. Consequently, SFLsrevenue growth has been primarily volume driven.
Export volume growth remains strong:SFL has recorded 41% CAGR in exports over FY02-06. Exports would
scale up further as SFL commences regular production of certain pipelineproducts. SFL plans to set up a 100% EOU near Chennai by FY08. Exportsfrom the JV Sundaram Bleistahl (74% equity with SFL) would also increasegradually. We expect 24% CAGR in exports for SFL over FY06-09 withexports accounting for 37% of standalone revenues (30% in FY06).
Expect 31% earnings CAGR over FY06-09 :Expected 22% revenue CAGR for SFL over FY06-09, aided by
contribution from new product lines. Despite largely flat operating
margins, earnings would grow at a faster clip (31% CAGR over our forecastperiod), primarily due to operating leverage. At CMP, stock trades at 10.6xFY09 consolidated earnings and 7.4x EV/EBIDTA.
-
7/29/2019 Auto Industry Project
46/52
Shareholding Pattern
Promoters
50%
Public & others
28%
Foreign
0%
Institutions
18%
Non Promoter
Corporate
Holding
4%
Key financials (consolidated)*
As on March 31
2007 FY05 FY06 FY07E FY08E FY09E
Net sales (Rs m) 9,899 11,317 15,381 18,104 20,697
Adj. net profit (Rs m) 659 589 897 1,134 1,311
Shares in issue (m) 210 210 210 210 210
Adj. EPS (Rs) 3.1 2.8 4.3 5.4 6.2
% growth 12.9 -10.7 52.3 26.5 15.6
PER (x) 21.2 23.7 15.6 12.3 10.6
Price/Book (x) 4.9 4.3 3.8 3.1 2.6
EV/EBITDA (x) 12.6 13.1 10 8.5 7.4RoE (%) 25.4 19.4 25.8 27.8 26.9
RoCE (%) 18 14.6 17 18 18.5
-
7/29/2019 Auto Industry Project
47/52
Clutch autoCompany is India's largest clutch manufacturer & Exporter today. Companyhas TS 16949 accredited by TUV, ISO 9002, QS 9000 and QS 9000: 1998certifications. Company has 3 decades of undisputed Leadership history.
Company supplies OE to Maruti, Mahindra, Tata- Mercedes, Ashok Leyland-IVECO, PTL, Escorts, New Holland, Eicher, TAFE-Messey Ferguson,Sonalika-International Tractors, JCBL, Bajaj Auto, greaves & BEML.Company is India's largest exporter of clutches, exports to 40 countries,85% to Americas. Company also has Largest after market distributionnetwork in India. It is Major supplier to Indian Defence Establishments. Italso provides State-of-the-art testing facility for Clutches. Company has setup R & D center recognized by Govt. of India. Clutch Auto Ltd (CAL) is thelargest supplier of clutches to the commercial vehicle and tractor segmentin India. It also caters to the passenger vehicle and replacement demandand its clientele includes Tata Motors, Ashok Leyland, Maruti Udyog, TAFE,Toyota, BEML, Escort Tractors and State Transport Undertakings, amongothers.
Technology intensive business:Clutch is a technology intensive business dominated by 6 players in theworld, all operating either as joint ventures or as technology partners orlicense arrangements. CAL is the only standalone clutch company in theworld, which is testimony to its technology capability.
The company has ventured into the US truck market through theaftermarket route making it the only offshore company to be able to do so.It plans to be a niche player in the low volume, high value added heavy-
duty clutch segment for class 7 and 8 trucks. This is because, thereplacement demand for trucks in US, with a population of nearly 4.5-5mnunits, is nearly as high (250,000 units pa) as the demand for new trucks.
CAL invested in technology, research and filed for patents and trademarksfor a number of products that it developed. Today, the company is theonly independent component company from India with an independentpatents and trademarks portfolio. It has built many innovative productslike the Cool Clutch, Whisper and EZ N Lite offering interchangeabilityunit-to-unit, component-to component with the same serviceability normsand tools.
Strong Domestic and Export market:While the domestic market will ensure steady revenues to the company,we expect high growth to come in from the export initiatives taken by thecompany. Presently, 25% of its revenues are on account of exports. Weexpect this proportion to rise and contribute to around 50% of revenues inthe next 3-4 years.
The company increased its capacity for clutch discs and clutch coverassemblies by 122% and 200% respectively in FY05 to meet the growingdemand for its products. The company has set up a strong distributionnetwork along with product liability cover for overseas market. It alreadyreceived orders from Fleet Pride, a leading heavy-duty class parts
distributor in the US. Expect the company to witness a CAGR of 53.3% insales and 83.6% in profits between FY05 and FY08.
-
7/29/2019 Auto Industry Project
48/52
Shareholding Pattern
Promoters
17%
Public & others
25%
Foreign
8%
Institutions
11%
Non Promoter
CorporateHolding
39%
Key financials (consolidated)*
As on March 31 2007 FY05 FY06 FY07E FY08E FY09E
Net sales (Rs m) 728 929 1,414 2,351 3,348
Adj. net profit (Rs m) -4 57 137 248 353
Shares in issue (m) 88 88 133 163 163
PER (x) -384 26.2 16.5 11.1 7.8
Price/Book (x) 4 3.5 2.4 1.8 1.5
EV/EBITDA (x) 27 14.4 10.5 6.9 4.7RoE (%) 25.4 19.4 25.8 27.8 26.9
RoCE (%) 6 11.5 15.3 20.3 25
-
7/29/2019 Auto Industry Project
49/52
LIMITATIONSLIMITATIONS1. The projections made in the study are subject to change as, Industry is exposed
to market risk from changes in interest rates, foreign exchange rates, commodityprices and strong competitive pressures
2. The operations of the auto component industry are directly dependent on the
Indian automotive industry, which is cyclical in nature, this poses a serious threat tothe small companies
-
7/29/2019 Auto Industry Project
50/52
SUGGESTIONSSUGGESTIONS
1. Potential for synergies between companies
2. Avoid cyclical nature of economy through scale of operations3. Enter in the export markets as Indian car and other vehicles are gaining acceptance
worldwide
-
7/29/2019 Auto Industry Project
51/52
Conclusion
All the companies which have been analyzed in the project are leaders in theirrespective sectors. These companies have outperformed the respective
benchmarks and are giving healthy returns over a period of time, however giventhe vagaries of the cyclical nature of parent industry and present scenario in
European markets, the auto-component sector is well poised to grow in future.
-
7/29/2019 Auto Industry Project
52/52
Annexure
Bibliography www.investopedia.com www.stockcharts.com
www.yahoofinance.com www.google.com www.marketscreen.com www.finpipe.com
www.wikipedia.com
http://www.stockcharts.com/http://www.yahoo.finance.com/http://www.google.com/http://www.marketscreen.com/http://www.finpipe.com/http://www.stockcharts.com/http://www.yahoo.finance.com/http://www.google.com/http://www.marketscreen.com/http://www.finpipe.com/