ardex waterproofing guide

SYST

EM A

RD

EXW

ater

proo

fing

and

Subs

trat

e Pr

epar

atio

n Pr

oduc

ts

This catalogue is designed for quick reference. Please refer to product datasheets and packaging for detailed instructions.

Contents

ARDEX INTRODUCTION

ARDEX Innovation SystemARDEX ARDEX & Our Environment

PROPERTIES TAblE lIqUID AND ShEET MEMbRANES

lIqUID MEMbRANES

Acrylic and Polyurethane MembranesEpoxy Membranes, Sealers, and AdhesivesPrimers, Mortars, and Reinforcement MaterialsAccessories

ShEET MEMbRANES

ARDEX Butynol®

ARDEX TPO MembranesTorch On MembranesSelf Adhesive Membranes Accessories

TEChNICAl INfORMATION

Adhe

sive

s

ARDEX Introduction

4

ARD

EX In

trod

uctio

nARDEX INNOVATION

A WORlD Of EXPERIENCE… PROVIDING ENGINEERED SOlUTIONS fOR WATERPROOfING PROJECTS

ARDEX Australia is part of the ARDEX Group, a company founded in Germany in the 1940’s, that has grown to become a global business, providing engineered solutions for flooring, waterproofing and tiling applications.

Our waterproofing solutions are highly application specific. From sub-floor to roofing, we have developed products that stand the test of time – and moisture. Non failure in these areas, even under extreme conditions, is critical which is why so many professionals rely on ARDEX.

Innovation has been a key influencer to this continued success, with technologies introduced many years ago still unique in their respective industries today. Being part of the Global ARDEX Group, ARDEX Australia has access to a huge Research and Development resource which is continually developing world unique products and technologies.

5

SYSTEM ARDEX

ARDEX is committed to developing products that are easy to use and offer high performance. ARDEX products, systems and services are designed to ensure professional contractors the competitive advantage of a lower total cost of installation through superior performance.

ARDEX waterproofing products are designed to work together for total reliability and performance. Each product is the careful result of research and development combining the input of contractors, specifiers and installers to ensure absolute product compatibility. We call this SystemARDEX

A system of high quality, totally compatible products matched to unparalleled technical and field support.

ARD

EX In

trod

uctio

n

6

ARDEX AND OUR ENVIRONMENT

As part of our ongoing commitment to the environment ARDEX is constantly improving our existing range and developing new products to reduce our ecological footprint.

The indoor air quality of buildings is also enhanced by using ARDEX products. As shown in the table below, the performance leading and most commonly used ARDEX waterproofing products have been independently tested to the Green Building Council Green Star Specification for Office Design (IEQ-11) and Office Interior (IEQ-13). The table below highlights ARDEX products that meet the benchmark for VOC credit in the Green Building Council of Australia’s Rating Tools.

VOC Tested Table

ARDEX WPM001

ARDEX WPM002

ARDEX WPM155

ARDEX WPM157

ARDEX WPM163

ARDEX WPM256

ARDEX WPM265

ARDEX WPM300

ARDEX WPM310

ARDEX WPM320

ARDEX WPM330

ARDEX WPM350

ARDEX WPM355

ARDEX WPM405

ARDEX WPM501

ARDEX B34

ARDEX B36

ARDEX Butynol® Roofing

ARDEX Butynol® Sealant

ARDEX Seam Tape and Primer

ARD

EX In

trod

uctio

n

7

Adhe

sive

s

Product Information

8

Tabl

e of

Pro

pert

ies

– Li

quid

s

lIq

UID

MEM

bR

ANES

Prod

uct

Kit Size

Use

Des

crip

tion

No. of Parts

No. of Coats

W.f.T. Per coat (mm)

D.f.T. Per coat (mm)

Total Coverage/ Kit (Sq.m)

Recoat Time Minimum

Recoat Time Maximum

hard Dry Time

Thinning & Cleaning Up

New

Nam

eO

ld N

ame

ARD

EX W

PM00

1Su

perfl

ex P

rem

ixed

Ba

thro

om &

Bal

cony

15L

Wat

erpr

oof M

embr

ane

for

Wal

ls1

20.

50.

2515

2 hr

sin

def.

3 da

ysw

ater

Wat

erpr

oof M

embr

ane

for

Floo

rs1.

00.

507.

5

ARD

EX W

PM00

2Su

perfl

ex T

wo

Part

Ba

thro

om &

Bal

cony

20L+

20

kg

Wat

erpr

oof M

embr

ane

for

Wal

ls2

20.

60.

4024

2 hr

sin

def.

3 da

ysw

ater

Wat

erpr

oof M

embr

ane

for

Floo

rs0.

90.

6016

ARD

EX W

PM15

515

LW

ater

proo

f Mem

bran

e fo

r W

alls

12

0.5

0.25

17.2

2 hr

sin

def.

3 da

ysw

ater

Wat

erpr

oof M

embr

ane

for

Floo

rs1.

00.

508.

6

ARD

EX W

PM15

720

kgM

oist

ure

Cur

ed

Poly

uret

hane

Mem

bran

e1

1-2

1.0

1.0

151

hr16

hrs

3 da

ysxy

lene

ARD

EX W

PM16

3AR

DEX

DPM

163

20L

Sem

i Per

mea

ble

UV

Sta

ble

Seal

er

12-

4n/

an/

a30

0 pe

r co

at20

m

ins

inde

f.7

days

wat

er

ARD

EX W

PM25

6H

ydrE

poxy

256

4LBo

ndin

g Br

idge

/Adm

ixtu

re/

Pene

trat

ing

Seal

er2

1n/

an/

a28

n/a

12 h

rs7

days

wat

er20

L14

0

ARD

EX W

PM26

5Sh

elte

rcoa

t Prim

er

Wat

er B

ased

20L

Wat

er B

ased

Prim

er fo

r

ARD

EX M

embr

anes

11

n/a

n/a

120

1 hr

inde

f.7

days

wat

er

ARD

EX W

PM27

0Sh

elte

rcoa

t Prim

er

Solv

ent B

ased

20L

Solv

ent B

ased

Prim

er fo

r

ARD

EX M

embr

anes

11

n/a

n/a

120

30

min

sin

def.

7 da

ysxy

lene

ARD

EX W

PM30

0H

ydrE

poxy

300

4LW

ater

Sto

p2

10.

30.

1512

4 hr

sin

def.

7 da

ysw

ater

20L

60

ARD

EX W

PM30

0H

ydrE

poxy

300

4LW

ater

proo

f Mem

bran

e2

20.

30.

156

4 hr

s7

days

7 da

ysw

ater

20L

30

9

Tabl

e of

Pro

pert

ies

– Li

quid

s

SEAl

ERS,

AD

hES

IVES

& A

DD

ITIV

ES

Prod

uct

Kit Size

Use

Des

crip

tion

No. of Parts

No. of Coats

W.f.T. Per coat (mm)

D.f.T. Per coat (mm)

Total Coverage/ Kit (Sq.m)

Recoat Time Minimum

Recoat Time Maximum

hard Dry Time

Thinning & Cleaning Up

New

Nam

eO

ld N

ame

ARD

EX W

PM31

0Sh

elte

rgua

rd15

L

Sem

i Per

mea

ble

Fa

çade

Mem

bran

e1

2

0.3

0.15

24

4 hr

sin

def.

7 da

ysw

ater

Low

Per

mea

bilit

y

Roof

Mem

bran

e1.

00.

507

ARD

EX W

PM32

0Re

tain

ing

Wal

l O

ne P

art

20L

Wat

erpr

oof M

embr

ane

fo

r Re

tain

ing

Wal

ls1

21.

00.

510

4 hr

sin

def.

7 da

ysw

ater

ARD

EX W

PM33

0Fa

çade

Mem

bran

e15

LSe

mi P

erm

eabl

e

Faça

de M

embr

ane

12

0.35

0.17

520

2 hr

sin

def.

7 da

ysw

ater

ARD

EX W

PM35

0Ro

of &

Dec

k

Two

Part

20L+

20

kgW

ater

proo

f Mem

bran

e

for

roof

s an

d flo

ors

22

1.0

0.6

204

hrs

24 h

rs7

days

wat

er3

1.0

0.6

13

ARD

EX W

PM35

5Pr

otec

tive

Fini

sh15

LW

ear

Coa

ting

12

0.34

0.17

224

hrs

inde

f.7

days

wat

er

ARD

EX W

PM40

5Sh

elte

rcre

te A

dditi

ve20

L

Slur

ry C

oat

1

12.

0n/

a10

0Be

fore

Su

rfac

e D

ryin

g24

hrs

wat

erSc

reed

or

Rend

er1

2 to

30

n/a

1.3/

mm

16 h

rsn/

a24

hrs

Tem

p. W

ater

proo

fing

21.

0n/

a24

16 h

rs21

day

s24

hrs

ARD

EX W

PM50

1H

ydrE

poxy

501

4LSt

ruct

ural

Adh

esiv

e2

1n/

an/

a8

n/a

n/a

24 h

rsw

ater

10

Tabl

e of

Pro

pert

ies

– Sh

eets

ShEE

T M

EMb

RAN

ES

Prod

uct

Type

Reinforce-ment Type

Weight (gms)

Rolls Per Pallet

Roll length (m)

Roll Width (m)

Normal Edge lap (mm)

Nom

inal

Th

ickn

ess/

Wei

ght

per

m²

Surf

ace

fini

sh

(top

/bot

tom

)N

ew N

ame

Old

Nam

e

bU

TYN

Ol®

RO

OfI

NG

ARD

EX b

UTYN

Ol®

1.0

Buty

nol®

Sta

ndar

dBu

tyl R

ubbe

rn/

an/

an/

a17

.86

1.4

501.

0mm

Blac

k

ARD

EX b

UTYN

Ol®

1.5

Buty

nol®

Med

ium

1.5m

mBl

ack

or G

rey

TPO

RO

OfI

NG

ARD

EX W

PM61

5Th

erm

opla

stic

Po

lyol

efin

Poly

este

rn/

an/

a30

.52

75-1

501.

5mm

Whi

te/G

rey

bAS

E Sh

EETS

AR

DEX

WPM

115

Vent

ed B

ase

Shee

tAP

P Bi

tum

enG

lass

6033

201.

0bu

tt jo

int

0.8m

mto

rch

film

ARD

EX W

PM11

6F/

B Ba

se S

heet

Poly

Ole

fin50

2810

1.05

502.

7mm

torc

h fil

m/fl

eece

TOR

Ch

-ON

MEM

bR

ANES

ARD

EX W

PM12

012

0 M

embr

ane

APP

Bitu

men

Combined Polyester/Glass

120

2315

1.0

752.

5mm

sand

/tor

ch fi

lm

ARD

EX W

PM15

03/

160

Mem

bran

e15

028

101.

075

3.0m

msa

nd/t

orch

film

ARD

EX W

PM18

018

0 M

embr

ane

180

2310

1.0

753.

5mm

sand

/tor

ch fi

lm

ARD

EX W

PM18

5M

iner

al M

embr

ane

180

2010

1.0

754.

5kg

Gre

y, W

hite

, Gre

en

slat

e/to

rch

film

ARD

EX W

PM18

6G

arde

n M

embr

ane

180

2310

1.0

753.

5mm

sand

/tor

ch fi

lm

ARD

EX W

PM12

2H

D B

ridge

Mem

bran

ePo

lyes

ter

300

1610

1.0

100

5.0m

msa

nd/t

orch

film

ARD

EX W

PM19

1Fi

brep

ol S

BSSB

S18

023

101.

010

03.

5mm

Torc

h fil

m/t

orch

film

ARD

EX W

PM12

6AP

AO B

itum

enC

ombi

ned

Poly

/Gla

ss18

020

101.

010

04.

0mm

sand

/tor

ch fi

lm

ARD

EX W

PM12

718

016

101.

010

05.

4kg

sand

/tor

ch fi

lmSE

lf A

Dh

ESIV

E Sb

S Sh

EETS

ARD

EX W

PM30

00X

Shel

ters

eal 3

000

SBS

n/a

n/a

2520

1.0

601.

5PE

She

et

11

Tabl

e of

Pro

pert

ies

– Sh

eets

ShEE

T M

EMb

RAN

E AD

hES

IVES

& S

OlV

ENTS

Prod

uct

Type

Cov

erag

eD

ry T

ime

Cle

an U

pN

ew N

ame

Old

Nam

e

ARD

EX W

PM24

0Sh

elte

rbit

Prim

er

Bitu

men

Cut

5m²/

L1-

2 ho

urs

ARD

EX W

A98

S

ARD

EX W

PM24

5F/

B Ba

se A

dhes

ive

Synt

hetic

Res

ins

1.5

45 m

inut

esAR

DEX

WA

98S

ARD

EX W

A98

SW

A So

lven

tH

ydro

carb

onn/

an/

an/

a

ARD

EX W

PM64

2Ac

rylic

2.5

– 3m

2 /L

Tack

Tim

e 45

min

utes

soap

y w

ater

12

Single Component Undertile Waterproofing MembraneARDEX WPM001 is a tough, ready to use waterproofing membrane specifically designed for use under tiles.

• Fibre reinforced – no need for reinforcing mat• Advanced acrylic – Will not re-emulsify • CSIRO Appraisal #91 for undertile waterproofing • Green Star – meets the benchmark for VOC

credit in the Green Building Council of Australia’s Rating Tools

locationInternal Wet Areas, Balconies, Decks, and other areas that will be tiled or otherwise protected by regular foot traffic.

SubstratesConcrete, Renders & Screeds, Fibre Cement, Plasterboard, *Plywood.*not recommended for external applications

CoverageOne 20kg unit covers approx 7.5m² to 15m² (2 coats)Floors 7.5m² (2 coats) D.F.T. – 1.0mmWalls 15m² (2 coats) D.F.T. – 0.5mm

ColoursBlue viscous paste

Drying TimesRecoat Time: 1-2 hrs Ready to Tile: 48 hrsFull Cure: 3 days

VOC Content18g/L

Packaging6.5kg, 20kg

ARDEX WPM001(SUPERflEX bAThROOM AND bAlCONY PREMIXED)

Two Component Undertile Waterproofing MembraneARDEX WPM002 is a tough, rapid drying two component waterproofing membrane specifically designed for use under tiles.

• Rapid Drying Time – can be tiled over in 16-24 hrs• Fibre Reinforced – no need for reinforcing mat • Currently the only class III two component

cementitious membrane in the market• Green Star – meets the benchmark for VOC


locationInternal & External Wet Areas, Balconies, Decks, and other areas that will be tiled or otherwise protected by regular foot traffic.Suitable for permanent immersion. (when tiled over)


Coverage40kg kit covers approx 16m² to 24m² (2 coats)Floors 16m² (2 coats) D.F.T. – 1.2mmWalls 24m² (2 coats) D.F.T. – 0.8mm

ColoursLiquid – White Powder – Off White

Drying TimesRecoat Time: 1-2 hrs Ready to Tile: 16-24 hrsFull Cure: 3 days

VOC Content25g/L

Packaging20kg (approx 20 litres) liquid pail / 2 x 10kg bags powder

ARDEX WPM002(SUPERflEX bAThROOM AND bAlCONY TWO PART)

Liqu

id M

embr

anes

13

Liqu

id M

embr

anes

Modified Polyurethane Waterproofing MembraneARDEX WPM155 is a water based polyurethane-acrylic waterproofing membrane developed for high performance under-tile waterproofing.

• Fast drying Polyurethane acrylic membrane• Excellent film build – easy to gauge thickness• Class III membrane – in accordance with

AS4858 requirements• Green Star – meets the benchmark for VOC


locationInternal & External Wet Areas, Balconies, Decks, and other areas that will be tiled or otherwise protected by regular foot traffic


CoverageFloors 8.6m² (2 coats) D.F.T. – 1.0mmWalls 17.2m² (2 coats) D.F.T. – 0.5mm

ColoursBlue Grey

Drying TimesRecoat Time: 1-2 hrs Ready to Tile: 24-48 hrsFull Cure: 3 days

VOC Content42g/L

Packaging4L (5.3kg), 15L (20kg) pails

ARDEX WPM155(UNDERTIlE PU ACRYlIC hYbRID MEMbRANE)

One Part Moisture Cured Polyurethane MembraneARDEX WPM157 is a one component moisture cured polyurethane system for waterproofing planter box internals, roof and deck areas (that are to be paved or covered) and landscaped decks.

• Excellent Flexibilty – Acommodates building movement

• Single Component – ready to use, no mixing required

• Excellent Chemical Resistance• Green Star – meets the benchmark for VOC


locationPlanter Box Internals, Landscaped Decks, Roof & Deck areas (that are to be paved or covered).

SubstratesConcrete, Renders & Screeds, Fibre Cement & Plasterboard.

Coverageapprox 15m² (1-2 coat) D.F.T. – 1.0mm

ColoursGreen

Drying TimesRecoat Time: 1 hr Dry Through: 8 hrs

VOC Content121g/L

Packaging15L (22kg) pail

ARDEX WPM157(POlYUREThANE DPM157)

14

Liqu

id M

embr

anes

External façade & Roof MembraneARDEX WPM310 is a tough, UV stable flexible premixed liquid applied waterproofing membrane. It has been specifically formulated as a general purpose membrane for exposed wall and roof waterproofing.

• Flexible – Acommodates normal building movement• Provides excellent UV resistance• Decorative – Choice of colours • Green Star – meets the benchmark for VOC


locationAs a decorative textured finish and waterproofing of external walls and facades. ARDEX WPM 310 is also suitable as a waterproofing membrane over concrete roof, decks.

SubstratesBrick, Masonry, Concrete Block, Concrete, Stone.

CoverageRoof Membrane Application – 7m² D.F.T. – 1.0mmWall Membrane Application – 24m² D.F.T. – 0.3mm

Colourscolours to match

Drying TimesRecoat Time: 4 hrsDry Through: 24 hrsFull Cure: 7 days

VOC Content100g/L

Packaging15L pail

ARDEX WPM310(ShElTERGUARD)

bitumen Emulsion Waterproofing MembraneARDEX WPM320 is a one component liquid applied, latex modified, bituminous elastomeric waterproofing membrane. Specially formulated ARDEX WPM 320 contains a premium root inhibitor that repels root growth.

• Water based, safe to use & low in odour• Contains effective root inhibitor – repels

most root growth• Compatible with ARDEX bitumen torch

applied membranes• Green Star – meets the benchmark for VOC


locationPlanter Boxes, Retaining Walls, Below grade tanking (not hydrostatic situations). Lapping ARDEX acrylic façade membranes to ARDEX bitumen torch applied membranes.

SubstratesBrick, Masonry, Concrete Block, Concrete, Stone.

Coverage20L unit covers approx 10m² (two coats) D.F.T. at 1.0mm

ColoursBlack

Drying TimesRecoat Time: 2-4 hrsHard Dry: 24-48 hrsFull Cure: 7 days

VOC Content45g/L

Packaging20L pail

ARDEX WPM320(ShElTERCOAT RETAINING WAll – 1 PART)

15

Liqu

id M

embr

anes

External Anti-Carbonation façade MembraneARDEX WPM330 is an extremely weather resistant water based acrylic waterproofing membrane. Specially designed as an exposed façade membrane, ARDEX WPM 330 prevents moisture, salt and carbon dioxide entering and damaging the building structure while still allowing the building to breathe.

• Protects buildings against Chloride Ion, Sulfide Ion & Carbon Dioxide attack

• Large range or durable colours• Resists fungi and algae growth • Green Star – meets the benchmark for VOC


locationBuilding Facades & external walls, roof parapets, silos, lighthouses & other external structures.Particularly important in coastal areas, high traffic density areas for application over concrete and brick surfaces.

SubstratesRendered walls, Brick/masonry walls, fibre cement sheets, Tilt up and pre-cast concrete, light weight aerated concrete blocks.

Coverage15L unit covers approx 20m² (two coats)D.F.T. at 0.35mm

Colourscolours to match

Drying TimesRecoat Time: 2-4 hrsHard Dry: 24 hrs

VOC Content61g/L

Packaging15L pail

ARDEX WPM330(ShElTERCOAT fAçADE MEMbRANE)

Roof and Deck Waterproofing MembraneARDEX WPM350 is a tough, UV stable, mildew resistant and flexible liquid applied waterproofing membrane. It has been specifically formulated for exposed situations.

• Provides tough, hardwearing surface• Flexible – accomodates building movement • Water based, low in odour & easy to clean• Green Star – meets the benchmark for VOC


locationExternal decks and floors, rooftops (new and existing), podiums, parapets. Ideal for areas that will be subjected to light foot traffic before being tiled. Suitable for light-medium foot traffic areas in conjunction with ARDEX WPM355.

SubstratesConcrete, renders, screeds, masonry, AAC blocks, fibre cement sheets (external grade only), pre primed metal

Coverage2 coat system (40kg) covers approx 20m² D.F.T. – 1.2mm3 coat system (40kg) covers approx 13m² D.F.T. – 1.8mm

ColoursLiquid – WhitePowder – Off White

Drying TimesRecoat Time: 4 hrsHard Dry: 24 hrsFull Cure: 7 days

VOC Content102g/L

Packaging20kg (approx 20 litres) liquid pail / 2 x 10kg bags powder

ARDEX WPM350(ShElTERCOAT ROOf & DECK – 2 PART)

16

Liqu

id M

embr

anes

high Wearing Acrylic Protective finishARDEX WPM355 is a high wearing acrylic protective finish. It has been specifically developed for use as a protective coating over ARDEX WPM350 membrane in exposed medium-high (regular) foot traffic situations.

• Hard wearing, flexible coating• Water based, environmentally friendly• Smooth semi-gloss appearance• Excellent UV and fungi resistance• Improves cleanability of ARDEX WPM350 system• Green Star – meets the benchmark for VOC


locationDesigned as a final coat over ARDEX WPM350 membrane. For exposed light-medium foot traffic.Protective coating over ARDEX Butynol® and bitumen sheet membranes.

SubstratesOver freshly applied liquid membranes.Over ARDEX Butynol® and bitumen sheet membranes.

Coverage15L covers approx 45m² (1 coat) D.F.T. – 0.34mm

ColoursLight Grey, Dark Grey, Sage, Beige

Drying TimesRecoat Time: 2 hrsHard Dry: 24 hrsFull Cure: 7 days

VOC Content127g/L

Packaging15L pail

ARDEX WPM355(ShElTERCOAT PROTECTIVE fINISh)

ARDEX WPM908 is a single part acrylic urethane based trafficable membrane. It has specifically been developed for use as a hard wearing trafficable membrane on various substrates.

• Water based – safe to use, low odour & easy cleaning

• Abrasion resistant – excellent slip resistance properties

• Single component – ready to use, no mixing required

• Green Star – meets the benchmark for VOC credit in the Green Building Council of Australia’s Rating Tools

locationPedestrian traffic podiums, terraces, balconies, roof decks, plant room floors, swimming pools surrounds.

SubstratesConcrete, renders, screeds, masonry, AAC blocks, fibre cement sheets (external grade only) pre primed metal.

Coverage2 coat system 1.4m2/L D.F.T – 0.60mm

ColourGrey, White base

Drying TimesRecoat Time: 2-4 hrsHard Dry: 24 hrsFull Cure: 4 days

Packaging15L (20kg) pail

ARDEX WPM908WATER bASED TRAffICAblE MEMbRANE

COMING

SOON

17

Epox

y M

embr

anes

, Sea

lers

, & A

dhes

ives

Single Component Polyurethane Dispersion SealerARDEX WPM163 is a one component water based urethane modified acrylic water resistant protective sealer.

ARDEX WPM163 is semi permeable allowing the surface to breathe and is not a waterproof membrane that will resist ponding water.

• Penetrates and cures within the pores of the surface being sealed

• Can be recoated at any time• Water based, safe to use, low odour

& easy cleaning • Green Star – meets the benchmark for VOC


locationDust Suppressant for warehouse and showroom concrete floors. Water resistant sealer for external concrete and masonry walls. Grease and oil resistant sealer for concrete and masonry paths. Incontinence barrier for concrete floors in health care institutions.

SubstratesConcrete, Renders & Screeds, Fibre Cement & Plasterboard.

Coverageapprox 15m²/L

ColoursClear/white

Drying TimesRecoat Time: 0-1 hrs Light Foot Traffic: 24 hrsFull Cure: 7 days

VOC Content22g/L

Packaging20L pail

ARDEX WPM163(ShElTERCOAT DPM163 PENTRATIVE SEAlER)

Water based Epoxy bonding bridgeARDEX WPM256 is a two component water based epoxy polyamide unpigmented new to old concrete bonding bridge, admixture for cement based materials and a structural penetrating sealer.

• Forms a structural bond between new and old concrete

• Can be applied to damp surfaces• Is compatible with fresh cement or

concrete products• Excellent adhesion to most substrates• Green Star – meets the benchmark for VOC


locationAs a new to old concrete bonding bridge. Add mixture to cement to produce variable strength repair mortars. As a concrete curing membrane to contain the water. Aid to curing of and sealing of concrete

SubstratesBrick, Masonry, Concrete Block, Concrete, Compressed Fibreboard, Stone & Timber

CoverageBonding Bridge – 7m²/LCuring Membrane – 3m²/L

Colourscolour to be confirmed

Drying TimesHard Dry: 24 hrsFull Cure: 7 days

VOC Content63g/L

Packaging4L, 20L kits

ARDEX WPM256(hYDREPOXY bONDING bRIDGE)

18

Epox

y M

embr

anes

, Sea

lers

, & A

dhes

ives

Water based Epoxy Structural AdhesiveARDEX WPM501 is a two component water based epoxy high-bodied polyamide environmentally friendly structural adhesive.

• Can be applied to damp surfaces• Can be applied to interior or exterior surfaces • Cures underwater in fresh, chlorinated and

salt waters• May be used as an admixture with cement to form

a patching mortar• Green Star – meets the benchmark for VOC


locationAs a waterproofing structural adhesive for wet areas.As a waterproofing adhesive in the bonding of floor and wall coverings. As a sandable filler over recessed fixing screws or surface imperfections

SubstratesBrick, Masonry, Concrete Block, Concrete, Compressed fibreboard, PVC, rubber, surface wallboards and timer, including parquetry.

Coverage4L kit covers approx 8m² (1 coat)

Colourscolour to be confirmed

Drying TimesHard Dry: 24 hrs

VOC Content13g/L

Packaging4L kit

ARDEX WPM501(hYDREPOXY 501 ADhESIVE)

Water based Epoxy MembraneARDEX WPM300 is a two component water based epoxy polyamide membrane/barrier coating.

• Can be applied to damp surfaces • AS 4020:2000 Potable Water Approved• Hydrostatic Pressure resistant waterproof membrane• Prevents rising damp and formation of efflorescence• Water Based – safe to use in sensitive locations• Green Star – meets the benchmark for VOC


locationLow water vapour transmission coating and as a barrier/seal coating over freshly laid or damp concrete. Waterproofing barrier on the negative side in below grade surfaces such as basements, tunnels, liftwells, retaining walls and carparks. Waterproofing membrane or barrier coating over freshly laid hardened concrete, prior to the application of conventional levelling compounds carpet and tile adhesives. As a barrier seal coating over damp, green or efllorescence producing concrete prior to overcoating with conventional building paints.

SubstratesBrick, Masonry, Concrete Block, Concrete, Stone and Timber.

CoverageWater Stop – 60m² (2 coats)Waterproof Membrane – 30m² (2 coats)

ColoursGrey, Mojo Black

Drying TimesRecoat Time: 4 hrsFull Cure: 7 days

VOC Content26g/L

Packaging4L, 20L kits

ARDEX WPM300(hYDREPOXY 300)

19

Prim

ers,

Mor

tars

& R

einf

orce

men

t Mat

eria

ls

General Purpose Water based PrimerARDEX WPM265 is a red water-based acrylic primer designed to seal porous substrates and enhance the adhesion of subsequent ARDEX undertile membranes.

• Water-based• Suitable for most substrates• Coloured – primed surfaces are easily identified• Green Star – meets the benchmark for VOC


locationInternal, External

SubstratesNew and old concrete, plywood, compressed fibreboards.

Coverage6m²/L – may vary depending on surface porosity

ColoursRed

Drying TimesRecoat Time: 1 hr

VOC Content11g/L

Packaging20L pail

ARDEX WPM265(ShElTERCOAT WATER bASED PRIMER)

General Purpose Solvent based PrimerARDEX WPM270 is a clear solvent-based primer designed to seal and improve the adhesion of dense or highly porous substrates.

• Highly Penetrating – ideal for porous substrates• Heavy duty sealer – suitable for dense

concrete (>30MPa)• Rapid drying• Low viscosity binder that seals absorbent

substrates and penetrates dust

locationExternal

SubstratesFibre-cement sheets (wet area grade), marine plywood, concrete, renders and screeds, masonry/concrete blocks.

Coverage6m²/L – may vary depending on surface porosity

ColoursClear

Drying TimesRecoat Time: 30 mins

VOC Contentn/a

Packaging20L metal pail

ARDEX WPM 270(ShElTERCOAT SOlVENT bASED PRIMER)

20

Prim

ers,

Mor

tars

& R

einf

orce

men

t Mat

eria

ls

high Performance Polymer Additive for Cement and Concrete MixesARDEX WPM405 is an SBR, multipurpose, concentrated liquid polymer additive which when used with sand/cement greatly improves the bond strength and flexibility.

• Water Resistant – can be used as a temporary waterproofing sealer on rooftops

• High Strength – can be used as an admix for render/screeds

• Water Based – safe to use & low odour • Green Star – meets the benchmark for VOC


locationTemporary waterproofing sealer in high exposure areas such as rooftops. Slurry coat prior to applying renders or toppings. Admix for sand/cement mixes especially in repair mortars, fillets, covings renders and screeds.

SubstratesConcrete, renders, brickwork, screeds, Masonry, AAC blocks, fibre cement sheets (external grade only).

CoverageTemp Waterproofing - 12m² (2 coats)Slurry Coat – 10m²/LRender – 2m²/L

ColoursClear

Drying TimesRecoat Time: 16 hrs (for temp waterproofing/screeds)Full Cure: 24 hrs

VOC Content32g/L

Packaging20L pail

ARDEX WPM 405(ShElTERCRETE ADDITIVE)

ARDEX B34 is designed to be used as both a corrosive inhibiting primer/bonding bridge mortar before the application of renders and patching mortars such as ARDEX B36.

ARDEX B34 can also be used as a fairing skim coat for final smoothing of masonry and brick walls.

ARDEX B34 is ideal for the preparation of facade surfaces prior to the application of ARDEX WPM330 External Anti-Carbonation Facade membrane.

• One component system• Adjustable consistency • Multi Functional product • Excellent anti-corrosive properties – for steel

reinforcement• Green Star – meets the benchmark for VOC


locationPre cast panel repairs and spalling concrete repairs. For aerated concrete panelled walls. In situ poured concrete repairs. Skim coat for swimming pool repairs – prior to waterproofing and tiling. Can be used for repairs under ARDEX membranes and tile adhesives

SubstratesConcrete, renders, screeds, Masonry, AAC blocks.

Coverage1mm thick: 12m2

3mm thick: 4m2

ColoursGrey

Drying TimesFairing Coat: 16 hours

VOC Content7g/L

Packaging20kg bag

ARDEX b34 ANTI CORROSIVE PRIMER, bONDING bRIDGE/MORTAR & fAIRING COAT

21

Prim

ers,

Mor

tars

& R

einf

orce

men

t Mat

eria

ls

ARDEX b34 ANTI CORROSIVE PRIMER, bONDING bRIDGE/MORTAR & fAIRING COAT

ARDEX Coving Bandage is designed to be used in construction joints >6mm.

Packaging100mm x 50m roll

ARDEX COVING bANDAGE

ARDEX B36 Concrete Patching and Repair Mortar is designed for reinstating concrete surfaces damaged through concrete spalling or other mechanical causes.

It is designed to be used in conjunction with ARDEX B34 Priming and Fairing Coat.

• One component system• Adjustable consistency • Shrinkage compensated • Green Star– meets the benchmark for VOC


locationFor façade preparation/restoration prior to application of ARDEX coating membranes. Pre cast panel repairs. Spalling concrete repairs. For repairing aerated concrete paneled walls. In situ poured concrete repairs. As a repair mortar for pool repairs – prior to waterproofing and tiling. Can be used for repairs under ARDEX membranes and tile adhesives

SubstratesConcrete, renders, screeds, Masonry, AAC blocks.

Coverage10mm thick = 1.5m²

ColoursGrey

Drying Timesapprox 16-24 hours

VOC Content8g/L

Packaging20kg bag

ARDEX b36 CONCRETE PATChING AND REPAIR MORTAR

Reinforced cloth used in critical areas like, cracks, movement joints, corner/coving areas and also wall floor junctions.

ARDEX Deckweb’s principal function is to help build membrane thickness in critical areas mentioned above.

Packaging6 x 190mm x 50 roll1.1m x 100m roll

ARDEX DECKWEbWOVEN REINfORCEMENT ClOTh

22

Buty

nol®

& T

PO

A synthetic rubber membrane with properties which resist ageing from heat, sunlight and ozone. It has excellent gas impermeability and toughness and remains flexible at low temperatures.

ARDEX Butynol® protects against water, moisture vapour, gases, sun, ozone, frost, acids, chemicals and bacteria.

• Single-ply, flexible syntehtic rubber membrane• Superior weatherability• Potable water AS4020 certificate approved• No maintenance required

Typical UsesTypical applications are roof membranes, external balconies and decks (protected) gutter linings, water containment (i.e. pillow tanks, reservioirs, pond liners), below grade applications.

TypeButyl rubber

Thickness/Weight1.0mm (1.2kg/m²)1.5mm (1.8kg/m²)

Top SurfaceButyl rubber

bottom SurfaceButyl rubber

Elongation 300%

Roll Size17.86m rolls

Roll Weight1.0mm (30kg) Black1.5mm (45kg) Black and Grey

ARDEX bUTYNOl®

ARDEX TPO is a proprietary Thermoplastic PolyOlefin combining polypropylene and ethylene propylene rubber.

ARDEX TPO membranes are lightweight, flexible, scrim reinforced to provide dependable performance in most commercial roofing applications.

• Ease of Installation – 2 m widths providing fast economical coverage

• Safe Installation – hot air welding eliminates the need for naked flames on site

• Superior Weatherability & Durability – contains no plasticisers and no halogen flame retardants reuslting in outstanding UV resistance

• Outstanding reflectivity – light coloured surfaces reflects sunlight improving the energy efficiency of the building

Typical UsesTypical applications for ARDEX TPO are roofing membranes, green roofs and metal roofs

TypeThermoplastic Polyolefin

ReinforcementPolyester

Thickness/Weight1.5mm (1.53kg/m²)

Top Surface/bottom SurfaceTPO

Tear Resistance≥400 N

Roll Size30.5m roll

Roll Weight94kg

ARDEX TPO

23

Torc

h-O

n M

embr

anes

0.8mm APP bitumen Vented base SheetARDEX WPM115 is an A.P.P. (Atactic Polypropylene Plastomeric) type modified bitumen membrane vented base sheet.

• Perforated base sheet for use in multi-layer waterproofing systems

• Eliminates bubbles and blisters forming underneath the waterproofing layer

• Allows vapour permeating through the deck to diffuse underneath the waterproofing

• Ideal solution for controlled, partially attached first layer in a multi-layer system

Typical UsesUsed as a base layer to allow dispersion of vapour in exposed bitumen sheet waterproofing systems.

TypeAPP

ReinforcementFibreglass (60g/m²)

Thickness/Weight0.8mm

Top SurfaceTorch Film

bottom SurfaceTorch Film

heat Stability110ºC

Cold flexibility-5ºC

Roll Size1 x 20m

Roll Weight20kg

Rolls Per Pallet25

ARDEX WPM115(ShElTERbIT VENTED bASE ShEET)

2.7mm APP bitumen fibre backed base SheetARDEX WPM116 is an A.P.P. type modified bitumen membrane slip or base sheet.

ARDEX WPM116 is reinforced with a non-woven polyester.

• Excellent Elongation • Cold Flexibility -5ºC• Good mechanical characteristics• Good puncture resistance

Typical UsesUsed as a base layer to allow dispersion of vapour in exposed bitumen sheet waterproofing systems.

TypeAPP

ReinforcementPolyester (50g/m²)


Top SurfaceTorch Film

bottom SurfacePolyester Surface



Roll Size1 x 10m

Roll Weight30kg

Rolls Per Pallet28

ARDEX WPM116(ShElTERbIT fIbRE bACK bASE ShEET)

24

Torc

h-O

n M

embr

anes

2.5mm Combined Reinforced APP biutmenARDEX WPM120 is an A.P.P. type modified bitumen membrane.

• A.P.P. modified compound• Excellent cold flexibility to -5˚C• Combined reinforcement carrier• High mechanical characteristics

Typical UsesARDEX WPM 120 is used as a base and or mid layer in multi-layer tanking membrane systems in horizontal or vertical applications, also for waterproofing balconies, terraces and roofs. ARDEX WPM 120 membrane is a sandwich membrane and must be protected from UV.

TypeAPP

ReinforcementFibreglass & Polyester (120g/m²)


Top SurfaceSand




Roll Size1 x 15m

Roll Weight44kg

Rolls Per Pallet23

ARDEX WPM120(ShElTERbIT 120 MEMbRANE)

3.0mm Combined Reinforced APP bitumen MembraneARDEX WPM150 (Shelterbit 3/160) is an A.P.P. type modified bitumen membrane.

• A.P.P. modified compound• Excellent cold flexibility to -5˚C• Heat welded laps provide homogenous joint• Combined reinforcement carrier• High mechanical characteristics• High puncture resistance

Typical UsesARDEX WPM 150 is used as a single layer or multi-layer tanking membrane in horizontal or vertical applications, also for waterproofing balconies, terraces and roofs. ARDEX WPM 150 membrane is a sandwich membrane and must be protected from UV radiation.

TypeAPP



Top SurfaceSand




Roll Size1 x 10m

Roll Weight35kg

Rolls Per Pallet28

ARDEX WPM150(ShElTERbIT 3/160 MEMbRANE)

25

Torc

h-O

n M

embr

anes

3.5mm Combined Reinforced APP bitumen MembraneARDEX WPM180 is an A.P.P. type modified bitumen membrane.

• A.P.P. modified compound• Excellent cold flexibility to -5˚C• Combined reinforcement carrier• High mechanical characteristics• High puncture resistance

Typical UsesARDEX WPM 180 is used as a single layer or multi-layer tanking membrane in horizontal or vertical applications, also for waterproofing balconies, terraces and roofs. ARDEX WPM 180 membrane is a sandwich membrane and must be protected from UV radiation.

TypeAPP



Top SurfaceSand




Roll Size1 x 10m

Roll Weight42kg

Rolls Per Pallet23

ARDEX WPM180(ShElTERbIT 180 MEMbRANE)

4.5kg/m² Mineral Coated APP bitumen MembraneARDEX WPM185 is an A.P.P. type modified bitumen membrane.

• Positive vapour barrier• Excellent resistance to atmospheric agents• Cold flexibility -5˚C• Resistant to chemical attacks• Withstand thermal shocks• High puncture resistance

Typical UsesARDEX WPM 185 is used as a cap layer in exposed membrane systems (allowing light foot traffic for maintenance). ARDEX WPM 185 is available in slate grey and green

TypeAPP


Thickness/Weight4.5kg/m²

Top SurfaceSlate Chip




Roll Size1 x 10m

Roll Weight45kg

Rolls Per Pallet20

ARDEX WPM185(ShElTERbIT MINERAl MEMbRANE)

26

Torc

h-O

n M

embr

anes

3.5mm Garden APP bitumen MembraneARDEX WPM186 is an A.P.P. type modified bitumen membrane. ARDEX WPM186 is treated with a preventative chemical to stop roots from plants damaging the membrane.

• Positive vapour barrier• Excellent resistance to pollutants and aging• Excellent cold flexibility -5˚C• Maintains shape stability at high temperatures• High resistance to perforation• Resists root growth ingress into both the

membrane and the laps

Typical UsesPlanter boxes, garden beds, roof gardens, flower beds and green civil works.

TypeAPP



Top SurfaceSand




Roll Size1 x 10m

Roll Weight42kg

Rolls Per Pallet23

ARDEX WPM186(ShElTERbIT GARDEN MEMbRANE)

5.0mm bridge & Deck APP bitumen MembraneARDEX WPM122 is an A.P.P. type modified bitumen membrane.

• Excellent cold flexibility -10˚C• Excellent elongation• Good elastic memory• Resistance to aggressive chemicals• Heavyweight non-woven polyester• High mechanical characteristics

Typical Uses• Heavy-duty applications, particularly as a

membrane under hot melt asphalt or bitumen.• Foundations and Underground Structures• Bridges, viaducts and roads structures• Reservoirs, Car Parks, Tunnels

TypeAPP

ReinforcementPolyester (300g/m²)


Top SurfaceSand




Roll Size1 x 10m

Roll Weight52kg

Rolls Per Pallet16

ARDEX WPM122(ShElTERbIT hD bRIDGE MEMbRANE)

27

3.5mm SbS bitumen MembraneARDEX WPM191 is a high performance SBS (Styrene-Butadine-Styrene) rubber modified bitumen membrane.

• Positive vapour barrier• Excellent resistance to atmosphere agents• High flexibility during application at sub-zero

temperature with no physical strains• Accommodates structural movements• Resistant to chemical attacks

Typical UsesARDEX WPM191 is used as a single layer or multi-layer tanking membrane in horizontal or vertical applications, also for waterproofing balconies, terraces and flat roofs. ARDEX WPM 191 membrane is a sandwich membrane and must be protected from UV radiation.

TypeSBS



Top SurfaceSand


heat Stability90ºC


Roll Size1 x 10m

Roll Weight43kg

Rolls Per Pallet23

ARDEX WPM191(ShElTERbIT SbS COlD ClIMATE MEMbRANE)

4.0mm Combined Reinforced APAO bitumen MembraneARDEX WPM126 is an APAO (Amorphous Poly Alpha Olefin) plastomeric type modified bitumen membrane.

• Excellent cold flexibility to -35˚C• Excellent Cold Stability & Thermal Ageing Properties• Combined reinforcement carrier• High mechanical characteristics• High puncture resistance

Typical UsesA 4.0mm thick premium combined reinforced (polyester & fibreglass) APAO modified bituminous torch applied membrane provides the benefits of APP while at the same time providing the low temperature resistant properties normally attributed to SBS.

TypeAPAO



Top SurfaceSand




Roll Size1 x 10m

Roll Weight40kg

Rolls Per Pallet23

ARDEX WPM126

Torc

h-O

n M

embr

anes

28

Torc

h-O

n &

Sel

f Adh

esiv

e M

embr

anes

5.4kg/m² Mineral Coated APAO bitumen MembraneARDEX WPM127 is an APAO plastomeric type modified bitumen membrane.

• A.P.A.O. modified compound• Excellent cold flexibility to -35˚C• Excellent cold stability & thermal ageing properties• Excellent elongation• Heat welded laps provide homogenous joint• Prefabricated membrane• Good elastic memory

Typical UsesProviding all the properties of the ARDEX WPM 126, ARDEX WPM 127 also contains slate chips fused into the upper surface for protecion in exposed applications.

TypeAPAO


Thickness/Weight5.4kg/m²

Top SurfaceSlate Chip




Roll Size1 x 10m

Roll Weight54kg

Rolls Per Pallet16

ARDEX WPM127

1.5mm SbS Self Adhesive Sheet MembraneARDEX WPM 3000X is a peel and stick SBS rubber modified bituminous/asphalt membrane.

ARDEX WPM3000X can be adjusted should it initially be placed in the wrong position.

• Cold Application – no open flames. • Ideal for restricted spaces.• Chemical resistance• Highly resistant to acids, alkalis and other pollutants.• Flexibility and adaptability• Self sealing – the membrane self seals on contact

maintaining its watertightness.

Typical UsesPlanter boxes, Foundations, Below-ground applications, Retaining walls, Balconies, Decks under cement screeds or other compatible hard coverings.

TypeSBS


heat Stability90ºC


Roll Size1 x 20m

Roll Weight30kg

Rolls Per Pallet25

ARDEX WPM3000X(ShElTERSEAl 3000X MEMbRANE)

bUTYNOl® ACCESSORIES

ARDEX WA98 ADhESIVESpecially formulated adhesive for all Butynol® applications including broadspan bonding and lap jointing in non-aggressive or non-immersed condition xposure.

ARDEX WA98 SOlVENTDesigned for general purpose clean-up and preparation procedures prior to the installation of ARDEX Butynol® Membranes.

ARDEX WPM299 SEAM PRMER A water resistant primer adhesive, used with seam tape for general lap bonding.

ARDEX SEAM TAPEUncured Butyl cold gum tape for use in conjunction with ARDEX Seam Primer for bonding Butynol® lap joints.

ARDEX flAShING TAPEUnderflashing for Butynol® in corners, pipes and penetrations.

29

Buty

nol®

Acc

esso

ries

ARDEX bUTYNOl® hOT TAPEUsed for welding large panels of Butynol® membrane together.

ARDEX bUTYNOl® SEAlANTDesigned for sealing Butynol® flashings into chases.

ARDEX bUTYNOl® DECK DRAIN

ARDEX bUTYNOl® CORNER flAShING

ARDEX DETAIl TAPE Patching and detailing Butynol® around pipes and penetrations.

ARDEX bUTYNOl® SCUPPER

ARDEX bUTYNOl® ROllERS

ARDEX bUTYNOl® VAPOUR VENT

ARDEX bUTYNOl® SMAll hANDlE SCRUbbERS

30

ARD

EX T

PO &

Bitu

men

Acc

esso

ries

ARDEX WPM240Primer used for ARDEX bituminous membranes.

ARDEX WPM245Adhesive for ARDEX WPM 116 fibre back base sheet.

ARDEX WPM131 Bitumen sealant for torch and self adhesive bitumen sheets.

ARDEX DROPPER

ARDEX lEAf GUARD

ARDEX DOWNPIPE CONNECTOR

ARDEX DROPPER (WITh ClAMP)

ARDEX SCUPPER

ARDEX VAPOUR VENTS

NB: other bitumen accessories include fixing washers, pressure seal, protection board, mineral chips & paver support pads.

TPO ACCESSORIES

bITUMEN ACCESSORIES

ARDEX WPM642Water based adhesive for ARDEX WPM615 TPO membrane”

ARDEX WPM623Non reinforced flashing tape for use where pre-moulded accessory products are not appropriate.

NB: other ARDEX TPO accessories include general purpose sealant, cut edge sealant, pourable sealer, eco walkway pads, seam plates and fasteners.

INSIDE OUT MOUlDED CORNERSDesigned for flashing inside and outside corners on curbs, parapets and scuppers.

qUICK SEAM flAShINGDesigned for flashing metal roof edging profiles.

UNIVERSAl PIPE flAShINGDesigned to be used in roofing applications for flashing of round penetrations.

ARDEX DOWNPIPE CONNECTOR

ARDEX SCUPPER 31

Adhe

sive

s

Technical Information

TEChNICAl INfORMATION

ARDEX is committed to being the leading provider of technical support in the field. We believe our responsibility does not end with the manufacture of innovative, technically superior products. Therefore our team of technical advisors work with contractors and specifiers, as well as with the ARDEX R&D team to provide solutions for specific applications. Some of these common solutions are published in ARDEX Technical Bulletins which are available on request. Some examples include:

• Waterproofing of internal water resistant particleboards and plywood

• Waterproofing potable water containment tanks

• Facade restoration

Contact our Technical Services Department for help with anything out of the ordinary, if we don’t already have the answer we will certainly investigate.

Technical Services Toll Free 1800 224 070

Email: [email protected]

32

Tech

nica

l Sup

port

ARD

EX S

uppo

rt

33

Tech

nica

l Sup

port

33

RElEVANT STANDARDS

AS 3740 – 2004 Waterproofing of wet areas within residential buildings

AS 4858 Wet Area Membranes

AS 4654.2 – 2009 Waterproofing membrane systems for exterior use – Above Ground Level – Materials Above Ground Level – Design and Installation

WARRANTY AND qUAlITY ASSURANCE

ARDEX products are generally warranted for 10 years when installed to relevant Australian Standards and applicable ARDEX specifications, technical data sheet and instruction for application and use. While we assure customers of the high standard and quality of our products and services, we accept no liability for any loss or damage which arises from particular site conditions, poor handling and storage, or installation by unqualified and unskilled applicators.

34

Tech

nica

l Sup

port

DISClAIMER

The technical details, recommendations and other information contained in this catalogue are given in good faith and represent the best of our knowledge and experience at the time of printing. It is your responsibility to ensure that our products are used and handled correctly and in accordance with any applicable Australian Standard, our instructions and recommendations and only for the use they are intended. We also reserve the right to update information without prior notice to you to reflect our ongoing research and development program.

Country specific recommendations, depending on local standards, codes of practice, building regulations or industry guidelines, may effect specific installation recommendations. The supply of our products and services is also subject to certain terms, warranties and exclusions, which may have already been disclosed to you in prior dealings or are otherwise available to you on request. You should make yourself familiar with them.

© ARDEX Australia Pty Ltd 2009

35

Tech

nica

l Sup

port

ONGOING PROfESSIONAl DEVElOPMENT

Our industry like any other, requires ongoing training to keep up with the changes in both the materials (membranes, substrates etc) and standards/legislation.

For waterproofers committed to providing a high level of workmanship, ARDEX can help you stay up to date, and increase both your professionalism and productivity.

ARDEX workshops are designed to give you hands on experience in addition to the theory.

These workshops cover:

• Application fundamentals e.g. undertile waterproofing, substrate preparation, and the relevant Australian Standards

• Product technology to develop expertise in matching product to application, substrate and balancing risk

• Getting the most out of new membranes

Contact your local ARDEX office for information on up coming workshops.

ARDEX Australia Pty ltd

New South Wales Ph (02) 9851 9100 Fax (02) 9838 7970 Queensland Ph (07) 3817 6000 Fax (07) 3881 3188 Victoria/Tasmania Ph (03) 9308 9255 Fax (03) 9308 9332 South Australia Ph (08) 8268 2511 Fax (08) 8345 3207 Western Australia Ph (08) 9256 8600 Fax (08) 9455 1227

Toll free Technical Advice 1800 224 070

ARDEX New Zealand ltd

Auckland Ph (09) 296 7690 Fax (09) 296 7689 Wellington Ph (04) 568 5949 Fax (04) 568 6376 Christchurch Ph (03) 384 3029 Fax (03) 384 9779

Stockist details:

October 2009

ardex waterproofing guide

Documents