【Image of the LCD display】【Image of the LCD display】

Total Solution Laboratory

Optimal for dynamic optical power meters.

Mounted with a time product measurement function!Mounted with a time product measurement function!

With DWA

-30 designated caseWith DWA

-30 designated case

100MHzSampling100MHzSampling

Waveform analysis unitWaveform analysis unit DWA-30

Dynamic Waveform Analyzer

65,536-stepDC～25MHｚAn energy meter that makes wide range measurements of high-speed sampling possible.

An Energy meter

4 types of sampling times from 10ns to 10us.

Ultracompact and waveform analyses of voltage inputs.Determination function and external output for measurement results.6 measurement modes such as an external trigger and a signal trigger.

DWA-30An energy meter that makes wide range measurements of high-speed sampling possible.

： ：

・ The specifications and appearance of the product may change due to improvements.・ Not available in units of substrates.・ Connection cables are not included.・ We offer support for customizations with displays, OEM, etc. Please contact us for details.

Front panelFront panel

Main functions/featuresMain functions/features

Other functionsOther functions Usage examplesUsage examples

Rear panelRear panel

AccessoriesAccessories

DWA-30 specificationsDWA-30 specifications

・1 power supply plug (R03-PB2F)・Utility disc（Operation manual, simple apps, etc.）

AD conversionsSamplingMeasurement 　results display

Input signals Input impedance Measured threshold settingsExternal trigger Edge selection Input impedance Trigger delayTerminal output voltageInput connectorPower voltage/currentBody size

Body weight

100MHz･12bit (0.5mV resolution)10ns / 100ns / 1us / 10us (4 choices)Peak value : 1mV to 1000mVAverage value: 1mV to 1000mVRMS value : 1mV to 1000mVTime product value: 5pVS to 655mVs0±1V (full scale)50Ω/100kΩ (rear panel switching type)0 to 999mV (1mV step)0 to 5V (Vth≒1.65V)Rising/falling>200kΩ0 to 99.99ms (10us step)H>3V, L<0.3V (±4mA or below)SMBDC5V、0.5AmaxH36.5 , W100 , D100.5 (excluding the connector, rubber foot, etc.)About 350g

●The bit format of the judgment result output in the front panel can be selected.

●Judgment reference values and judgment ranges can each be set by measurement type.

2's complementOff se t B i n a r ySign + AbsoluteRange Indication LTA-10

SPS-1

This product can be used as a dynamic optical power meter by pairing itwith our products [photodiode amp LTA series products] or products by Graviton Inc. [high-sensitivity O/E converter SPS series products]

●Six measurement modes can be selected.

●The ranges (spans) of actual measurements can be set and the occurrence of errors due to measurements of unnecessary regions can be prevented.●One-shot measurements within the measurement range in a specified time as well as those for capturing only waveforms that are measured at first.●USB communication function (settings for all parameters can be made with general terminal communications software)

Automatic control systems for those such as power controls can be built with use of this output.●The measurement results are instantly displayed in the LCD screen (trace width of 65,536 samples）

●Measurements of numeric values consist of four types of peak values, average values, RMS values, and time product values.●Numeric values are judged during each measurement and all measurement results are displayed at the same time.●Measurement results are also outputted as detailed information in the terminal block of the front panel.

M a n u a l t r a c i n gC o n s t a n t t r a c i n gS i n g l e t r i g g e rN o r m a l t r i g g e rS i g n a l t r i g g e rS i gn a l t r i g ge r ( r epe a t )

Measured during each manual operationMeasured during each constant period of timeMeasured only once with the external trigger as the starting point.Measured with the external trigger as the starting point and this process repeated.Measurements started with the input signal itself.The input signal itself measured and this process repeated.

65,536-stepDC～25MHｚ