tz 250f led zoom fresnel ww · tz 250f led zoom fresnel ww user manual 7 dmx mode: operating in a...

Order code: ELUM108

TZ 250F LED Zoom Fresnel WW

User Manual

www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 2

Safety advice

WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessaryfortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodificationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment.

OPERATING DETERMINATIONSIfthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageandthewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

CAUTION!KEEP THIS EQUIPMENT AWAY FROM RAIN, MOISTURE AND LIQUIDS

CAUTION! TAKE CARE USING THIS EQUIPMENT!HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!

• Neverletthepowercablecomeintocontactwithothercables.Handlethepowercableandallmainsvoltageconnectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoflammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhenequipmentisnotinuseorbeforecleaning!Onlyhandlethepower-cablebytheplug.Neverpullouttheplugbypullingthepower-cable.

• Makesurethattheavailablemainssupplyvoltageisbetween110~240VAC,50/60Hz.

• Makesurethatthepowercableisnevercrimpedordamaged.Checktheequipmentandthepowercableperiodically.

• Iftheequipmentisdroppedordamaged,disconnectthemainspowersupplyimmediatelyandhaveaqualifiedengineerinspecttheequipmentbeforeoperatingagain.

• Iftheequipmenthasbeenexposedtodrastictemperaturefluctuation(e.g.aftertransportation),donotconnectpowerorswitchitonimmediately.Thearisingcondensationmightdamagetheequipment.Leavetheequipmentswitchedoffuntilithasreachedroomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuseimmediately.Packtheunitsecurely(preferablyintheoriginalpackingmaterial),andreturnittoyourProLightdealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybecarriedoutbyaqualifiedtechnician.THISUNITCONTAINSNOUSERSERVICEABLEPARTS.

• Thislightingfixtureisforprofessionaluseonly-itisnotdesignedfororsuitableforhouseholduse.Theproductmustbeinstalledbyaqualifiedtechnicianinaccordancewithlocalterritoryregulations.Thesafetyoftheinstallationistheresponsibilityoftheinstaller.Thefixturepresentsrisksofsevereinjuryordeathduetofirehazards,electricshockandfalls.

• Warning!RiskGroup2LEDproductaccordingtoEN62471.Donotviewthelightoutputwithopticalinstrumentsoranydevicethatmayconcentratethebeam.

• WARRANTY:Twoyearsfromdateofpurchase.

www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 3

Product overview & technical specifications

TheTZ250FLEDZoomFresnelisahighperformanceluminaireforgenerallongthrowlightingapplications.Thisfixtureoffersasuperiorlightoutputatamoderatepricepoint.The250WLEDoffersabetteroutputthana1200Whalogenfixture.The4pushbuttondisplayallowsuserstoselectDMXandmanualdimmingmodesalongwithdimmingcurves.

•1x250WwarmwhiteCOBLED(3200K)

•Adjustablebeamangle:13°-45°

•35,000Lux@2m(fullon)

•3.6kHzrefreshrate

•DMXchannels:2

•0-100%dimming

•4dimmingcurvesinbothLEDandhalogenprofiles:Linear,squarelaw,inversesquarelawandS-curve

•4pushbuttonmenuwithLCDdisplay

•PowerCONinput/output

•5-PinXLRinput/output

•3-PinXLRinput/output

•Filterframeandbarndoorsincluded

TZ 250F LED Zoom Fresnel WW

Specifications TZ 250F LED Zoom Fresnel

Powerconsumption 260W

Powersupply 110~240V,50/60Hz

Dimensions 399x336x420mm

Weight 8.1kg

Ordercode ELUM108

336mm

280mm

310mm

399mm

420mm

458mm

0m 2m 3m 4m 5m

13° - Lux45° - Lux

350007700

1m

14000030800

156003420

45°

87501930

56001230

13°

www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 4

POWER INPUT:110-240V~50/60HzDMX INPUT DMX OUTPUTFUSE: T3A 250V POWER OUT

DMX occupation: 1: Ground 2: Signal (-) 3: Signal (+)

DMX occupation: 1: Ground 2: Signal (-) 3: Signal (+) 4: NC 5: NC

09 10

11 03 0302 12

13

14

05 06

07

01

08

04

Technical specifications

01-Earthpoint

02-LCDdisplay

03-Functionbuttons

04-Functionknobs

05-3-PinDMXinput

06-3-PinDMXoutput

07-5-PinDMXinput

08-5-PinDMXoutput

09-PowerCONinput

10-PowerCONoutput

11-FuseT3A250V

12-Barndoors

13-Hangingbracket

14-Hangingbracketadjustableknob

Inthebox:1 x fixture, 1 x barn doors 1 x PowerCON cable & 1 x user manual

www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 5

Operating instructions

MENU

DMX MODE DMX address setting

DMX MODE ADDR:001

DMX MODE ADDR:512

NoDMX Mode

NoDMX Mode Hold

NoDMX Mode Close

Blackout if no DMX signal present

Hold last command

Dormancy

Dormancy 00

Dormancy 99

Last command hold (0 mins - 9 mins)

Backlight

Backlight 02

Backlight 60

Backlight (02 mins - 60 mins)

Lamp Behaviour

Lamp Behaviour LED

Lamp Behaviour Halogen

LED/Halogen selection

Fan.Set

Fan.Set Auto

Fan.Set Low

Fan speedFan.Set High

Dim.Curve

Dim.Curve Linear

Dim.Curve INV.Square

Dim.Curve Square

Dimmer Curves

Dim.Curve S-Curve

www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 6

Operating instructions

Fixture Time

Temp.Info

Error.Info

Model.Info Elumen8

Reset.Motor Focus

Software.V

Panel.Ctrl Dim:000

Panel.Ctrl Dim:255

Panel.Ctrl

Panel.Ctrl Focus:000

Panel.Ctrl Focus:255

Brightness/ beam angle

Calibrate

Calibrate Focus:000

Calibrate Focus:255

Calibrate focus

MENU CONT.

www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 7

DMX mode:

OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestflexibilitywhenitcomestocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitofthefixtureandeachfixtureindependently.

ToaccesstheDMXaddressmode,pressthe“MENU”buttononthefrontoftheunittoshow“DMX MODE ADDR:” ontheLCDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosettherequiredDMXaddress.Pressthe“ENTER”buttontoconfirmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

TochoosewhatthefixturedoeswhenitlosesDMXsignal,pressthe“MENU”buttononthefrontoftheunittoshow“NoDMX Mode” ontheLCDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetween“Hold”or“Close”.Pressthe“ENTER”buttontoconfirmthesetting.

Ifyouchoose“HOLD”pressthe“MENU”againtoshow“Dormancy” ontheLCDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosethowlongthefixtureholdsthelastDMXsignalfor,from“00” - “99”.Pressthe“ENTER”buttontoconfirmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Manual dimming/focus mode:Toaccessthemanualdimming/focusmode,pressthe“MENU”buttonontherearoftheunittoshow“Panel.Ctrl”ontheLCDdisplay.Theunitisnowinmanualdimming/focusmode.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthefocusfrom“000” - “255”.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthebrightnessfrom“000” - “255”.

Alternativelyyoucanaccessthismodebypressingeitherofthe“DIMMING” or“FOCUS” knobs.Pressthe“DIMMING”knobandturntosetthefocusfrom“000” - “255”.Pressthe“ENTER”buttontoconfirmthesetting.Repeatforthe“FOCUS”knob.

(000 = LED off, 255 = LED at full brightness).

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Operating instructions

Channel Value Function

1 000-255 Focus(8bit)

2 000-255 Masterdimmer(0-100%)

2 channel mode:

www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 8

Focus calibration:Toaccessfocuscalibration,pressthe“MENU”buttonontherearoftheunittoshow“Calibrate”ontheLCDdisplay.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthefocusfrom“000” - “255”.Pressthe“ENTER”buttontoconfirmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Dimming curves

Toaccesstheunitsdimmercurves,pressthe“MENU”buttonontherearoftheunittoshow“Dim.Curve”ontheLCDdisplay.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthedimmingcurverequired.

“Linear”-LELineardimmingcurve

“Square”-LEDSquaredimmingcurve

“INV.Square”-LEDInverseSquaredimmingcurve

“S-Curve”-LEDS-Curvedimmingcurve

Pressthe“ENTER”buttontoconfirmthesetting.

TochoosebetweenHalogenandLEDdimmercurves,pressthe“MENU”buttonontherearoftheunittoshow“Lamp Behaviour”ontheLCDdisplay.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthedimmingcurvemoderequired.

“LED”-LEDdimmingcurves

“Halogen”-Halogendimmingcurves

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Operating instructions

www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 9

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachfixturerequiresa“startaddress”from1-511.Afixturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannelindicatedbythestartaddress.Forexample,afixturethatoccupiesoruses7channelsofDMXandwasaddressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthechainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligentfixturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothefixture.DMXdataissentasserialdatathattravelsfromfixturetofixtureviatheDATA“IN”andDATA“OUT”XLRterminalslocatedonallDMXfixtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogetherandoperatefromasinglecontroller,aslongasallfixturesandthecontrollerareDMXcompliant.ToensureproperDMXdatatransmission,whenusingseveralDMXfixturestrytousetheshortestcablepathpossible.TheorderinwhichfixturesareconnectedinaDMXlinedoesnotinfluencetheDMXaddressing.Forexample;afixtureassignedtoaDMXaddressof1maybeplacedanywhereinaDMXline,atthebeginning,attheend,oranywhereinthemiddle.WhenafixtureisassignedaDMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisfixturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,seeimagebelow.

Note: DMX cable must be daisy chained and cannot be split.

DMX setup

FurtherDMXcablescanbepurchasedfromallgoodsoundandlightingsuppliersorProLightConceptsdealers.Pleasequote:

CABL10 – 2mCABL11 – 5mCABL12 – 10m

www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 10

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.DonotconnectthecablesshieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRsoutercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,youmayneedtouseaterminatoronthelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease the possibilities of erratic behaviour. (3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRfixturesmaybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmissionproblemsandinterference.ItisalwaysadvisabletoconnectaDMXterminal,(resistance120Ohm1/4W)betweenpin2(DMX-)andpin3(DMX+)ofthelastfixture.

5-pin XLR (female)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)Pin 4: N/CPin 5: N/C

3-pin XLR (female)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)

3-pin XLR (male)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)

5-pin XLR (male)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)Pin 4: N/CPin 5: N/C

DMX setup

www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 11

WEEE notice

Correct Disposal of this Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedwithotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtotheenvironmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromothertypesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.

Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheirlocalgovernmentoffice,fordetailsofwhereandhowtheycantakethisitemforenvironmentallysaferecycling.

Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthepurchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.

www.prolight.co.uk TZ 250F LED Zoom Fresnel WW User Manual 12