t3103a timer

T3103A(ms)

Parameter Name T3103A(ms)

Description In an intra-BSC handover, the timer T3103 is initiated after the BSC

sends a handover command. Before the timer T3103 expires, the timer

stops if the BSC receives a Handover Complete message. After the timer

expires, the BSC sends a handover failure message.

GUI Value Range [500,60000]

Default Value 10000

Unit Milliseconds

Step -

Modification Rules None

Configuration

Policy

If this timer is set to a higher value, this may waste the channel resources

and cause the congestion.

If this timer is set to a lower value, this may influence the handover

success rate.

Recommended

Parameter

Relationship

BSC Feature Channel Management

Parameter Class Parameters About Radio Resources

Caution None

Parent topic: Cell Timers

Huawei Proprietary and Confidential

Documents