standard equipment optional equipment heavy-duty … … · • winch level wind system (patent...
Post on 18-Apr-2020
3 Views
Preview:
TRANSCRIPT
STANDARD EQUIPMENTStructure:• Quick switch hydraulic pivoting recovery boom
(no assembly required)
Winch:• 35,000 lb high speed planetary gear winch• 5/8” dia x 250’ or 200’ length (6 x 36 IWRC RRL EIPS)
galvanized winch cable with swivel hook• Winch level wind system (patent pending)• Adjustable air controlled winch cable tensioner• Driver and passenger side air winch free spool
release with dis-engagement indicator lights• Removable recovery hook and galvanized shackle
Stabilizers:• Independent hydraulic stabilizer legs• Self-stowing flip down claw/spade
Hydraulics:• Custom hydraulic manifold for in-line straight-for-
ward hose routing• Mechanical or hydraulic locking features on all
functions for improved safety
Controls:• Driver and passenger side plug-in provision for
wired remote control• Wireless non-proportional remote control system for
all functions• Manual override controls
Paint:• Jerr-Dan black
Anchor-Points:• D-rings on stabilizer outer and inner sections
(two pair total)
Body:• 37” width tool compartments• Integrated pull out access step• Interior grab handles• Wireless remove clip storage
Miscellaneous:• Wired non-proportional remote control system for
all functions with drive and passenger side plug locations
Paint:• Custom paint colors available
Structural Capacity
Winch Line Pull (first layer)
Wire Rope
Weight
Minimum Frame RBM (per rail)
SRS-W35S
SRS-W25S
Minimum Front GAWR
25-Ton, 30-Ton & 35-Ton Wreckers
50-Ton & 60-Ton Wreckers
Frame Height Range
Frame Width Range
Additional Cab to Axle
35,000 lbs
35,000 lbs (W355)
25,000 lbs (W255)
5/8” dia x 250 ft (W35S)
5/8” dia x 200 ft (W25S)
4,500 lbs
4,200,000 in-lbs
3,200,000 in-lbs
18,000 lbs
18,000 lbs
40”- 45”
34”- 35”
37”
OPTIONAL EQUIPMENT
SPECIFICATIONS: SRS-W35S
RECOMMENDED CHASSIS REQUIREMENTS
SIDE RECOVERY
SYSTEMHEAVY-DUTY WRECKER
A PIVOTAL MOMENT ON THE ROAD TO RECOVERYWith the Jerr-Dan Side Recovery System for heavy-duty wreckers, we’ve pulled out all the stops. It’s capable of pulling at multiple angles – forward, sideways and rearward. And its recovery boom pivots to allow recovery from either side. So when you and your wrecker
roll up, there’s simply no getting around it.
jerrdan.com | 800.926.9666
An Oshkosh Corporation Company. The Jerr-Dan name and Jerr-Dan logo are registered trademarks of Jerr-Dan Corporation. ©2017 Jerr-Dan Corporation. Some equipment shown may be optional. Specifications subject to change without notice or obligation.
All ratings specified are based on structural factors only, not vehicle capacities or capabilities. • VALUE BASED ON ACTUAL CHASSIS FRAME HEIGHT. VALUES SHOWN ARE FOR LISTED FRAME HEIGHT RANGE.
• ALL DIMENSIONS ARE FOR REFERENCE ONLY.
STANDARD HYDRAULIC STABILIZER LEGS
25K/35K LB HIGH SPEED, PLANETARY WINCH
STANDARD WIRELESSREMOTE CONTROLS
SLIDE OUT STEP FOR ACCESS
GRAB HANDLES FOR SECURE ACCESS
EMBOSSED FTQ TOP DIAMOND
SIDE RECOVERY SYSTEMStructurally capable of pulling at multiple angles –
forward, sideways and rearward
STANDARD HYDRAULIC STABILIZER LEGS Enables superior stability when performing
tough side pulls
STANDARD TOOLBOXProvides additional storage, plus better
fit and finish
RETROFITTING CAPABILITYRetrofits to existing wreckers and reduces storage
loss by utilizing 37” mounting space
SELF-STORAGE FLIP DOWN CLAW/SPADETruly self-stowing claw and spade,
an industry first for wreckers
HYDRAULIC PIVOTING RECOVERY BOOMEnables safe, easy and efficient recovery
from either side of the vehicle
THE INDUSTRY’S BEST ALL-AROUND
RECOVERY
HYDRAULIC PIVOTING RECOVERY BOOM
RETROFITTING CAPABILITY SELF-STOWING FLIPDOWN CLAW/SPADE
top related