high performance tracking - ideematec · high performance tracking safetrack horizon is the...
Post on 21-Jul-2019
223 Views
Preview:
TRANSCRIPT
safeTrack Horizon
HIGH PERFORMANCE TRACKING
safeTrack Horizon is the decentralized horizontal tracker with the best drive/performance ratio
and the highest slope tolerance on the market, enables significant savings on foundations and
grading costs, moves up to 6 tracker tables on uneven ground with only one single load
decoupled drive unit, and tracks PV modules on a low-stress and tension-free basis.
Tracking system – horizontal, single-axis
Tracking range – 110° (55° to each side)
Length of tracking system – up to 180m
Width of tracking system – up to 5m
Distance between rows – freely definable
GCR (ground cover ratio) – freely definable
Slope Tolerance East-West – 36% (20°)
Slope Tolerance North-South – 36% (20°)
Drive system – AC motor | DC system (battery backup)
safeTrack Horizon
MAXIMIZE YOUR YIELD
MECHANICAL SPECIFICATIONS
• Structure: Steel
• Foundations: Sigma foundation with additional
reinforcement for direct ramming, pre-drilling
or concrete filling
• Corrosion protection standard: C3
• Standard loads: ASCE 7-10 105 mph 3 sec gust
• Coatings according to DIN EN 10346
TYPICAL MODULE CONFIGURATION
• Up to 6 tables per tracking system
• Standard table design: 2 x 30 modules vertically
(72-cell modules)
• Modules directly mountable on tracker structure
without additional mounting rails or clamps
• Support for all types of module (polycrystalline,
thin-film, bifacial)
Low-cost BOS Profitable O & M
Low center of gravity
Wear-freetracking
Zero stress on modules
Fast and easy cleaning
Extremely adaptable to the terrain
Maximum lengthof rows
60% less drives and foundations
Only 180 foundations per MW neededunder standard conditions
(wind up to 144 kmh)
Low balance point + steel rope transmissionreduces loads on
foundations effectively
Only low foundation embedment necessary (1.2 – 1.6 m);
substantial material saving
CONTROL SYSTEM
• Tracking control system: astronomical algorithm
• Backtracking: Individual 3D backtracking
• Monitoring system: KoRoNa software
• Sensor technology: Inclination, wind, snow,
temperature
• Storm position: 0°
• Night position: inclined in any requested degree
in order to avoid soiling (rain, sand)
• Communication: redundant system
WARRANTY
• Structure: 10 years
• Motor / Gearbox: 5 years
• Electrics: 2 years
IDEEMATEC Headquarters
IDEEMATEC Deutschland GmbHNeusling 9cD-94574 Wallerfing
Tel. +49 (0)9936–95 10 90–0Fax +49 (0)9936–95 10 90 60info@ideematec.de
IDEEMATEC Inc.1910 Abbott Street Suite 200Charlotte, North Carolina 28203, USA
Phone +1 980 237 7925info@ideematec.com
top related