safeTrack Horizon

HIGH PERFORMANCE TRACKING

safeTrack Horizon is the decentralized horizontal tracker with the best drive/performance ratio

and the highest slope tolerance on the market, enables significant savings on foundations and

grading costs, moves up to 6 tracker tables on uneven ground with only one single load

decoupled drive unit, and tracks PV modules on a low-stress and tension-free basis.

Tracking system – horizontal, single-axis

Tracking range – 110° (55° to each side)

Length of tracking system – up to 180m

Width of tracking system – up to 5m

Distance between rows – freely definable

GCR (ground cover ratio) – freely definable

Slope Tolerance East-West – 36% (20°)

Slope Tolerance North-South – 36% (20°)

Drive system – AC motor | DC system (battery backup)

safeTrack Horizon

MAXIMIZE YOUR YIELD

MECHANICAL SPECIFICATIONS

• Structure: Steel

• Foundations: Sigma foundation with additional

reinforcement for direct ramming, pre-drilling

or concrete filling

• Corrosion protection standard: C3

• Standard loads: ASCE 7-10 105 mph 3 sec gust

• Coatings according to DIN EN 10346

TYPICAL MODULE CONFIGURATION

• Up to 6 tables per tracking system

• Standard table design: 2 x 30 modules vertically

(72-cell modules)

• Modules directly mountable on tracker structure

without additional mounting rails or clamps

• Support for all types of module (polycrystalline,

thin-film, bifacial)

Low-cost BOS Profitable O & M

Low center of gravity

Wear-freetracking

Zero stress on modules

Fast and easy cleaning

Extremely adaptable to the terrain

Maximum lengthof rows

60% less drives and foundations

Only 180 foundations per MW neededunder standard conditions

(wind up to 144 kmh)

Low balance point + steel rope transmissionreduces loads on

foundations effectively

Only low foundation embedment necessary (1.2 – 1.6 m);

substantial material saving

CONTROL SYSTEM

• Tracking control system: astronomical algorithm

• Backtracking: Individual 3D backtracking

• Monitoring system: KoRoNa software

• Sensor technology: Inclination, wind, snow,

temperature

• Storm position: 0°

• Night position: inclined in any requested degree

in order to avoid soiling (rain, sand)

• Communication: redundant system

WARRANTY

• Structure: 10 years

• Motor / Gearbox: 5 years

• Electrics: 2 years

IDEEMATEC Headquarters

IDEEMATEC Deutschland GmbHNeusling 9cD-94574 Wallerfing

Tel. +49 (0)9936–95 10 90–0Fax +49 (0)9936–95 10 90 60info@ideematec.de

IDEEMATEC Inc.1910 Abbott Street Suite 200Charlotte, North Carolina 28203, USA

Phone +1 980 237 7925info@ideematec.com