esd safe rubber mat & esd groundings

HANSIN ELECTRONICS TRADING

LAGUNASTAR INDUSTRIES COMPANYShop = 3rd Flr Unit C22 Banawe De Sta Rosa Phase 2 Balibago, Santa Rosa City, Laguna

B23 L6 Villa Susana Malitlit, Santa Rosa City, Laguna 4026

Mob/Tel : 0933-5996622, 0932-8688548, ( 049) 5308463lagunastar1@gmail.com , lagunastar2@gmail.com , lagunastar3@gmail.com www.hanstartools.com , http://soldering102.blogspot.com

LOW COST, WILL GET THE JOB DONE VAT Reg. TIN 007-434-260-000

TECHNICAL DATA SHEET ANTISTATIC (ESD) RUBBER MATESD Safe Rubber Mat is also known as the Two Layer ESD Mat or Green Mat or Conductive Rubber Mat EPA Working Mat

ESD Rubber mat has Static Dissipative top rubber layer laminated to a conductive rubber bottom layer. Surface resistivity of top layer is 107 - 109 and bottom layer is 103 105. Meets ESD-D-412 standards .Material offers excellent resistance to oil, grease and most common solvent. ESD Rubber mat has resistant to 2400 F (116 deg C).

*Surface resistance: TOP LAYER 107-109, Bottom LAYER103-105

The static dissipative top layer is designed to discharge static fields at the right speed to prevent damage. The conductive bottom layer of the ESD Rubber Mat is designed to quickly drain all the charges filtered by the top layer to the ground. The ESD Rubber Mat does not melt and does not burn coming into contact with hot metal parts or soldering debris. This ESD Table Mat is ideal for table top applications and comes with a ground cord so you can have your work space setup and ESD safe within seconds.

Features:

1) High quality antistatic rubber mats ( Durable, heat and chemical resistance, non-slip surface, lays flat- will not curl)

2) Designed to drain charges from personnel, tote boxes, bags, components

3) Entirely free of carbon , Not affected by humidity

Application: Designed for use with work benches that require anti-static measures to ensure safe handling of semiconductors, electronic components, and other devices, is also heat-resistant, ensuring peace of mind when performing soldering work.

Offers uniform, consistent conductive performance. Features a matte surface finish, reducing reflections and helping prevent eye fatigue. Surface is just slippery enough to facilitate easy workability. Features a soft surface that resists bending. (Hardness A type 64)

Color: Green (top layer) & black (bottom layer)Application: table, floor, shelf , Use as either bench or floor mat Economical, easy to cut , Easy to install , Easy to clean and maintain Thickness: 2mm , Available width: 1.0 m , *Abrasion< 0.02g/cm2, Static elimination time< 0.5S Note: 1 roll = 10m in length- ESD Groundings (ESD Terminals) sold separatelyESD Groundings--Also called as UFO grounding kit or Ground Lead Kit

With snap connector, ground cord, banana plug, Crocodile plug-This standard ground lead-kit comprises of a t straight polyurethane cord, star kit (UFO), 14mm snap cap, banana plug and an alligator clip. 1 Meg-ohm safety resistor is securely crimped by a steel fastener in the PVC-molded 14mm snap cap. The star kit is fitted onto the table mat and the ground lead grounded to earth.LAGUNASTAR INDUSTRIES COMPANY

http://soldering102.blogspot.comlagunastar1@gmail.com lagunastar2@gmail.comMob/Tel. 0933-5996622 049-5308463